[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw13 started "build _service:gbs:xmlsec1.spec" at Fri Jan 19 15:12:10 UTC 2018. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen:4.0:Unified' repository 'standard' arch 'aarch64' srcmd5 'b431a67a482caf2155c141a775c2cfc5' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:xmlsec1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/110] installing libmagic-data-5.32-4.3 [ 8s] [2/110] installing setup-0.9-2.10 [ 8s] [3/110] installing filesystem-3.1-2.1 [ 8s] [4/110] installing glibc-2.24-4.12 [ 8s] [5/110] installing bash-3.2.57-3.1 [ 8s] [6/110] installing binutils-2.27-3.31 [ 9s] [7/110] installing cpio-2.11-2.1 [ 9s] [8/110] installing diffutils-3.3-2.1 [ 9s] [9/110] installing fdupes-1.40-2.64 [ 9s] [10/110] installing findutils-4.3.8-3.36 [ 9s] [11/110] installing hostname-3.12-2.1 [ 9s] [12/110] installing libatomic-6.2.1-3.13 [ 9s] [13/110] installing libattr-2.4.47-1.1 [ 9s] [14/110] installing libbz2-1.0.6-2.55 [ 9s] [15/110] installing libcap-2.24-2.64 [ 9s] [16/110] installing libelf-0.153-2.26 [ 9s] [17/110] installing libext2fs-1.43.4-2.1 [ 9s] [18/110] installing libfreebl3-3.34.1-3.2 [ 9s] [19/110] installing libgcc-6.2.1-3.13 [ 9s] [20/110] installing libgomp-6.2.1-3.13 [ 9s] [21/110] installing libgpg-error-1.27-3.1 [ 9s] [22/110] installing libitm-6.2.1-3.13 [ 9s] [23/110] installing libltdl-2.4.2-2.50 [ 9s] [24/110] installing liblua-5.1.4-2.16 [ 9s] [25/110] installing liblzma-5.2.2-2.49 [ 9s] [26/110] installing libpcre-8.39-3.1 [ 10s] [27/110] installing libpopt-1.16-2.16 [ 10s] [28/110] installing libsmack-1.3.1-4.6 [ 10s] [29/110] installing libsmartcols-2.30-6.1 [ 10s] [30/110] installing libsqlite-3.18.0-5.5 [ 10s] [31/110] installing libuuid-2.30-6.1 [ 10s] [32/110] installing m4-1.4.17-2.1 [ 10s] [33/110] installing net-tools-2.0_20121208git-2.1 [ 10s] [34/110] installing nspr-4.12-2.16 [ 10s] [35/110] installing patch-2.7-2.16 [ 10s] [36/110] installing pkg-config-0.28-3.33 [ 10s] [37/110] installing sed-4.1c-2.1 [ 10s] [38/110] installing update-alternatives-1.18.15-2.1 [ 10s] [39/110] installing which-2.20-2.1 [ 10s] [40/110] installing zlib-1.2.11-2.61 [ 10s] [41/110] installing build-compare-2015.04.28-2.36 [ 10s] [42/110] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 11s] [43/110] installing terminfo-base-full-5.9-3.27 [ 11s] [44/110] installing coreutils-6.9-3.2 [ 11s] [45/110] installing cpp-6.2.1-3.13 [ 12s] [46/110] installing gawk-3.1.5-3.1 [ 12s] [47/110] installing gcc-c++-6.2.1-3.13 [ 13s] [48/110] installing grep-2.5.2-3.1 [ 13s] [49/110] installing libacl-2.2.52-2.63 [ 13s] [50/110] installing libasm-0.153-2.26 [ 13s] [51/110] installing libblkid-2.30-6.1 [ 13s] [52/110] installing libgcrypt-1.8.1-3.1 [ 13s] [53/110] installing libgfortran-6.2.1-3.13 [ 13s] [54/110] installing libopenssl-1.0.2m-3.5 [ 13s] [55/110] installing libstdc++-6.2.1-3.13 [ 13s] [56/110] installing make-4.0-2.16 [ 13s] [57/110] installing nss-certs-3.34.1-3.2 [ 13s] [58/110] installing smack-1.3.1-4.6 [ 13s] [59/110] installing xz-devel-5.2.2-2.49 [ 13s] [60/110] installing bzip2-1.0.6-2.55 [ 13s] [61/110] installing libmagic-5.32-4.3 [ 13s] [62/110] installing libxml2-2.9.7-3.3 [ 14s] [63/110] installing xz-5.2.2-2.49 [ 14s] [64/110] installing libdw-0.153-2.26 [ 14s] [65/110] installing libstdc++-devel-6.2.1-3.13 [ 14s] [66/110] installing file-5.32-4.3 [ 14s] [67/110] installing libmount-2.30-6.1 [ 14s] [68/110] installing libncurses-5.9-3.27 [ 14s] [69/110] installing libncurses6-5.9-3.27 [ 14s] [70/110] installing linux-glibc-devel-3.10-2.63 [ 15s] [71/110] installing openssl-1.0.2m-3.5 [ 15s] [72/110] installing tar-1.17-3.1 [ 15s] [73/110] installing db4-4.8.30.NC-2.58 [ 15s] [74/110] installing glibc-locale-2.24-4.12 [ 15s] [75/110] installing gzip-1.3.12-3.36 [ 15s] [76/110] installing libcc1-6.2.1-3.13 [ 15s] [77/110] installing libfdisk-2.30-6.1 [ 16s] [78/110] installing libubsan-6.2.1-3.13 [ 16s] [79/110] installing libxslt-1.1.31-4.1 [ 16s] [80/110] installing pam-1.1.6-3.1 [ 16s] [81/110] installing tzdata-2017c-3.1 [ 16s] [82/110] installing elfutils-0.153-2.26 [ 16s] [83/110] installing glibc-devel-2.24-4.12 [ 16s] [84/110] installing less-466-2.1 [ 16s] [85/110] installing libreadline-5.2-2.55 [ 16s] [86/110] installing procps-ng-3.3.9-4.1 [ 16s] [87/110] installing libxslt-tools-1.1.31-4.1 [ 16s] [88/110] installing perl-5.20.0-3.13 [ 17s] [89/110] installing ncurses-devel-5.9-3.27 [ 18s] [90/110] installing gcc-6.2.1-3.13 [ 18s] [91/110] installing build-mkbaselibs-20120927-2.1 [ 18s] [92/110] installing qemu-accel-x86_64-aarch64-0.4-3.8 [ 23s] [93/110] installing readline-devel-5.2-2.55 [ 23s] [94/110] installing autoconf-2.69-2.63 [ 23s] [95/110] installing libxml2-tools-2.9.7-3.3 [ 23s] [96/110] installing zlib-devel-1.2.11-2.61 [ 23s] [97/110] installing libgpg-error-devel-1.27-3.1 [ 23s] [98/110] installing util-linux-2.30-6.1 [ 24s] [99/110] installing util-linux-su-2.30-6.1 [ 24s] [100/110] installing automake-1.14.1-2.49 [ 24s] [101/110] installing libopenssl-devel-1.0.2m-3.5 [ 24s] [102/110] installing build-20120927-2.1 [ 24s] [103/110] installing libgcrypt-devel-1.8.1-3.1 [ 24s] [104/110] installing libxml2-devel-2.9.7-3.3 [ 24s] [105/110] installing libtool-2.4.2-2.50 [ 24s] [106/110] installing libxslt-devel-1.1.31-4.1 [ 24s] [107/110] installing nss-3.34.1-3.2 [ 24s] [108/110] installing libsoftokn3-3.34.1-3.2 [ 24s] [109/110] installing rpm-4.11.0.1-4.2 [ 24s] [110/110] installing rpm-build-4.11.0.1-4.2 [ 24s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 24s] now finalizing build dir... [ 25s] build target is aarch64-tizen-linux [ 25s] ----------------------------------------------------------------- [ 25s] I have the following modifications for xmlsec1.spec: [ 25s] 5c5 [ 25s] < Release: 0 [ 25s] --- [ 25s] > Release: 2.2 [ 25s] 188a189 [ 25s] > %changelog [ 25s] ----------------------------------------------------------------- [ 25s] ----- building xmlsec1.spec (user abuild) [ 25s] ----------------------------------------------------------------- [ 25s] ----------------------------------------------------------------- [ 25s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/standard/b431a67a482caf2155c141a775c2cfc5-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 25s] Building target platforms: aarch64-tizen-linux [ 25s] Building for target aarch64-tizen-linux [ 25s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3VRXNA [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + rm -rf xmlsec1-1.2.22 [ 25s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.22.tar.gz [ 25s] + /bin/tar -xf - [ 25s] + STATUS=0 [ 25s] + '[' 0 -ne 0 ']' [ 25s] + cd xmlsec1-1.2.22 [ 25s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 25s] + echo 'Patch #0 (d4d3535-to-1ca1a13.diff):' [ 25s] Patch #0 (d4d3535-to-1ca1a13.diff): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/d4d3535-to-1ca1a13.diff [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file include/xmlsec/keyinfo.h [ 25s] patching file include/xmlsec/xmldsig.h [ 25s] patching file src/errors.c [ 25s] patching file src/io.c [ 25s] patching file src/openssl/digests.c [ 25s] patching file src/openssl/x509vfy.c [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch):' [ 25s] Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file include/xmlsec/keyinfo.h [ 25s] patching file include/xmlsec/xmldsig.h [ 25s] patching file src/errors.c [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #2 (0003-Add-gitignore-file.patch):' [ 25s] Patch #2 (0003-Add-gitignore-file.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-gitignore-file.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file .gitignore [ 25s] + echo 'Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch):' [ 25s] Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-Replace-vulnerable-function-to-thread-safety.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/errors.c [ 25s] patching file src/io.c [ 25s] patching file src/openssl/app.c [ 25s] patching file src/templates.c [ 25s] patching file src/transforms.c [ 25s] patching file src/xmldsig.c [ 25s] patching file src/xmltree.c [ 25s] patching file src/xpath.c [ 25s] + echo 'Patch #4 (0005-Fix-svace-defects.patch):' [ 25s] Patch #4 (0005-Fix-svace-defects.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-Fix-svace-defects.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/bn.c [ 25s] patching file src/templates.c [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #5 (0006-Refine-legacy-code-about-error-handling.patch):' [ 25s] Patch #5 (0006-Refine-legacy-code-about-error-handling.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-Refine-legacy-code-about-error-handling.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/errors.c [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #6 (0007-Fix-svace-defect.patch):' [ 25s] Patch #6 (0007-Fix-svace-defect.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-Fix-svace-defect.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch):' [ 25s] Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file include/xmlsec/xmldsig.h [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch):' [ 25s] Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-Add-NULL-check-logic-on-custum-code.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #9 (0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch):' [ 25s] Patch #9 (0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file include/xmlsec/xmldsig.h [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #10 (0011-Seperate-proxyCtxPtr-according-to-purpose.patch):' [ 25s] Patch #10 (0011-Seperate-proxyCtxPtr-according-to-purpose.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-Seperate-proxyCtxPtr-according-to-purpose.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file include/xmlsec/xmldsig.h [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #11 (0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch):' [ 25s] Patch #11 (0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #12 (0013-Add-default-section-to-switch-for-error-handling.patch):' [ 25s] Patch #12 (0013-Add-default-section-to-switch-for-error-handling.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0013-Add-default-section-to-switch-for-error-handling.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/xpath.c [ 25s] + echo 'Patch #13 (0014-Fix-memory-leak-on-upstream-code.patch):' [ 25s] Patch #13 (0014-Fix-memory-leak-on-upstream-code.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0014-Fix-memory-leak-on-upstream-code.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/relationship.c [ 25s] + echo 'Patch #14 (0015-Fix-memory-leak-on-custom-code.patch):' [ 25s] Patch #14 (0015-Fix-memory-leak-on-custom-code.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0015-Fix-memory-leak-on-custom-code.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/xmldsig.c [ 25s] + echo 'Patch #15 (0016-Fix-svace-defects.patch):' [ 25s] Patch #15 (0016-Fix-svace-defects.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0016-Fix-svace-defects.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/openssl/signatures.c [ 25s] + echo 'Patch #16 (0017-Fix-compilation-warnings.patch):' [ 25s] Patch #16 (0017-Fix-compilation-warnings.patch): [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0017-Fix-compilation-warnings.patch [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] patching file src/errors.c [ 25s] patching file src/io.c [ 25s] patching file src/openssl/app.c [ 25s] patching file src/xmldsig.c [ 25s] patching file src/xmltree.c [ 25s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 25s] + exit 0 [ 25s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.mOzU7o [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd xmlsec1-1.2.22 [ 25s] ++ uname -m [ 25s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 25s] + ref=/usr/lib/rpm [ 25s] + for s in guess sub [ 25s] ++ find -maxdepth 8 -name config.guess [ 25s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 25s] + grep -q config-patches@ ./config.guess [ 25s] + grep -q aarch64 ./config.guess [ 25s] + grep -q ppc64le ./config.guess [ 25s] + for s in guess sub [ 25s] ++ find -maxdepth 8 -name config.sub [ 25s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 25s] + grep -q config-patches@ ./config.sub [ 25s] + grep -q aarch64 ./config.sub [ 25s] + grep -q ppc64le ./config.sub [ 25s] + LANG=C [ 25s] + export LANG [ 25s] + unset DISPLAY [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + LDFLAGS= [ 25s] + export LDFLAGS [ 25s] + LD_AS_NEEDED=1 [ 25s] + export LD_AS_NEEDED [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + autoreconf -v --install --force [ 27s] autoreconf: Entering directory `.' [ 27s] autoreconf: configure.ac: not using Gettext [ 28s] autoreconf: running: aclocal --force -I m4 [ 36s] autoreconf: configure.ac: tracing [ 37s] autoreconf: running: libtoolize --copy --force [ 37s] libtoolize: putting auxiliary files in `.'. [ 37s] libtoolize: copying file `./ltmain.sh' [ 37s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 37s] libtoolize: copying file `m4/libtool.m4' [ 37s] libtoolize: copying file `m4/ltoptions.m4' [ 37s] libtoolize: copying file `m4/ltsugar.m4' [ 37s] libtoolize: copying file `m4/ltversion.m4' [ 37s] libtoolize: copying file `m4/lt~obsolete.m4' [ 45s] autoreconf: running: /usr/bin/autoconf --force [ 48s] autoreconf: running: /usr/bin/autoheader --force [ 50s] autoreconf: running: automake --add-missing --copy --force-missing [ 61s] autoreconf: Leaving directory `.' [ 61s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 61s] configure: WARNING: unrecognized options: --enable-dynamic [ 61s] checking build system type... aarch64-tizen-linux-gnu [ 61s] checking host system type... aarch64-tizen-linux-gnu [ 61s] checking for a BSD-compatible install... /bin/install -c [ 61s] checking whether build environment is sane... yes [ 61s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 61s] checking for gawk... gawk [ 61s] checking whether make sets $(MAKE)... yes [ 61s] checking whether make supports nested variables... yes [ 61s] checking whether UID '399' is supported by ustar format... yes [ 61s] checking whether GID '399' is supported by ustar format... yes [ 61s] checking how to create a ustar tar archive... gnutar [ 61s] checking whether to enable maintainer-specific portions of Makefiles... no [ 61s] checking whether make supports nested variables... (cached) yes [ 61s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 61s] checking whether the C compiler works... yes [ 61s] checking for C compiler default output file name... a.out [ 61s] checking for suffix of executables... [ 61s] checking whether we are cross compiling... no [ 61s] checking for suffix of object files... o [ 61s] checking whether we are using the GNU C compiler... yes [ 61s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 61s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 62s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 62s] checking for style of include used by make... GNU [ 62s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 62s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 62s] checking for grep that handles long lines and -e... /bin/grep [ 62s] checking for egrep... /bin/grep -E [ 62s] checking for ANSI C header files... yes [ 62s] checking how to print strings... printf [ 62s] checking for a sed that does not truncate output... /bin/sed [ 62s] checking for fgrep... /bin/grep -F [ 62s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 62s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 62s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 62s] checking the name lister (/bin/nm -B) interface... BSD nm [ 62s] checking whether ln -s works... yes [ 62s] checking the maximum length of command line arguments... 1572864 [ 62s] checking whether the shell understands some XSI constructs... yes [ 62s] checking whether the shell understands "+="... yes [ 62s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 62s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 62s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 62s] checking for aarch64-tizen-linux-gnu-objdump... no [ 62s] checking for objdump... objdump [ 62s] checking how to recognize dependent libraries... pass_all [ 62s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 62s] checking for dlltool... no [ 62s] checking how to associate runtime and link libraries... printf %s\n [ 62s] checking for aarch64-tizen-linux-gnu-ar... no [ 62s] checking for ar... ar [ 62s] checking for archiver @FILE support... @ [ 62s] checking for aarch64-tizen-linux-gnu-strip... no [ 62s] checking for strip... strip [ 62s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 62s] checking for ranlib... ranlib [ 62s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 62s] checking for sysroot... no [ 62s] checking for aarch64-tizen-linux-gnu-mt... no [ 62s] checking for mt... no [ 62s] checking if : is a manifest tool... no [ 62s] checking for sys/types.h... yes [ 62s] checking for sys/stat.h... yes [ 62s] checking for stdlib.h... yes [ 62s] checking for string.h... yes [ 62s] checking for memory.h... yes [ 62s] checking for strings.h... yes [ 62s] checking for inttypes.h... yes [ 62s] checking for stdint.h... yes [ 62s] checking for unistd.h... yes [ 62s] checking for dlfcn.h... yes [ 62s] checking for objdir... .libs [ 62s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 62s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 62s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 62s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 62s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 62s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 62s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 62s] checking whether -lc should be explicitly linked in... no [ 62s] checking dynamic linker characteristics... GNU/Linux ld.so [ 62s] checking how to hardcode library paths into programs... immediate [ 62s] checking whether stripping libraries is possible... yes [ 62s] checking if libtool supports shared libraries... yes [ 62s] checking whether to build shared libraries... yes [ 62s] checking whether to build static libraries... yes [ 62s] checking for cp... /bin/cp [ 62s] checking for mv... /bin/mv [ 62s] checking for tar... /bin/tar [ 62s] checking for perl... /bin/perl [ 63s] checking for dirent.h that defines DIR... yes [ 63s] checking for library containing opendir... none required [ 63s] checking for ANSI C header files... (cached) yes [ 63s] checking stdio.h usability... yes [ 63s] checking stdio.h presence... yes [ 63s] checking for stdio.h... yes [ 63s] checking for stdlib.h... (cached) yes [ 63s] checking for string.h... (cached) yes [ 63s] checking ctype.h usability... yes [ 63s] checking ctype.h presence... yes [ 63s] checking for ctype.h... yes [ 63s] checking errno.h usability... yes [ 63s] checking errno.h presence... yes [ 63s] checking for errno.h... yes [ 63s] checking ansidecl.h usability... no [ 63s] checking ansidecl.h presence... no [ 63s] checking for ansidecl.h... no [ 63s] checking time.h usability... yes [ 63s] checking time.h presence... yes [ 63s] checking for time.h... yes [ 63s] checking for strchr... yes [ 63s] checking for strrchr... yes [ 63s] checking for printf... yes [ 63s] checking for sprintf... yes [ 63s] checking for fprintf... yes [ 63s] checking for snprintf... yes [ 63s] checking for vfprintf... yes [ 63s] checking for vsprintf... yes [ 63s] checking for vsnprintf... yes [ 63s] checking for sscanf... yes [ 63s] checking for timegm... yes [ 63s] checking for development environment... no [ 63s] checking for man pages build... no [ 63s] checking for docs build... no [ 63s] checking for __FUNCTION__ or __func__... __func__ [ 63s] checking size of size_t... 8 [ 63s] checking for pkg-config... yes [ 63s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 63s] checking pkg-config is at least version 0.9.0... yes [ 63s] checking for LIBXML... yes [ 64s] checking for LIBXSLT... yes [ 64s] checking for OPENSSL... no [ 64s] checking for OPENSSL... yes [ 64s] checking for NSS... no [ 64s] checking for NSS... no [ 64s] checking for NSS... no [ 64s] checking for NSS... no [ 64s] checking for nspr libraries >= 4.4.1... no [ 64s] checking for nss libraries >= 3.9... no [ 64s] checking for GCRYPT... no [ 64s] checking for GCRYPT... no [ 64s] checking for GCRYPT... no [ 64s] checking for gcrypt libraries >= 1.4.0... checking for gnutls libraries >= 2.8.0... no [ 64s] checking for mscrypto libraries... none [ 64s] checking for default crypto library... yes ('openssl') [ 64s] checking for MD5 support... yes [ 64s] checking for RIPEMD-160 support... yes [ 64s] checking for SHA1 support... yes [ 64s] checking for SHA224 support... yes [ 64s] checking for SHA256 support... yes [ 64s] checking for SHA384 support... yes [ 64s] checking for SHA512 support... yes [ 64s] checking for HMAC support... yes [ 64s] checking for DSA support... yes [ 64s] checking for RSA support... yes [ 64s] checking for x509 support... yes [ 64s] checking for DES support... yes [ 64s] checking for AES support... yes [ 64s] checking for GOST support... no [ 64s] checking for EXPERMIENTAL GOST2012 support... no [ 64s] checking for XMLDSig support... yes [ 64s] checking for XMLEnc support... yes [ 64s] checking for xmlsec-crypto dynamic loading support... no [ 64s] checking for xmlsec-crypto dynamic loading support in command line tool... no [ 64s] checking for docs folder... $(datadir)/doc/xmlsec1 [ 64s] checking for Simple Keys Manager testing... yes [ 64s] checking for templates testing... yes [ 64s] checking for debugging... no [ 64s] checking for profiling... no [ 64s] checking for pedantic... no [ 64s] checking for static linking... no [ 65s] checking that generated files are newer than configure... done [ 65s] configure: creating ./config.status [ 65s] config.status: creating include/xmlsec/openssl/Makefile [ 65s] config.status: creating src/openssl/Makefile [ 65s] config.status: creating include/xmlsec/gcrypt/Makefile [ 65s] config.status: creating src/gcrypt/Makefile [ 65s] config.status: creating include/xmlsec/version.h [ 65s] config.status: creating Makefile [ 65s] config.status: creating include/Makefile [ 65s] config.status: creating include/xmlsec/Makefile [ 65s] config.status: creating include/xmlsec/private/Makefile [ 65s] config.status: creating src/Makefile [ 65s] config.status: creating apps/Makefile [ 65s] config.status: creating docs/Makefile [ 65s] config.status: creating docs/api/Makefile [ 65s] config.status: creating man/Makefile [ 65s] config.status: creating xmlsec1-openssl.pc [ 65s] config.status: creating xmlsec1-gnutls.pc [ 65s] config.status: creating xmlsec1-gcrypt.pc [ 65s] config.status: creating xmlsec1-nss.pc [ 65s] config.status: creating xmlsec1.spec [ 65s] config.status: creating xmlsec1Conf.sh [ 65s] config.status: creating xmlsec1-config [ 66s] config.status: creating config.h [ 66s] config.status: executing depfiles commands [ 67s] config.status: executing libtool commands [ 67s] configure: WARNING: unrecognized options: --enable-dynamic [ 67s] + /bin/make -j4 CFLAGS=-fPIE LDFLAGS=-pie [ 67s] /bin/make all-recursive [ 67s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 67s] Making all in include [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 67s] Making all in xmlsec [ 67s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 67s] Making all in private [ 67s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 67s] make[4]: Nothing to be done for 'all'. [ 67s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 67s] Making all in openssl [ 67s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 67s] make[4]: Nothing to be done for 'all'. [ 67s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 67s] Making all in gcrypt [ 67s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 67s] make[4]: Nothing to be done for 'all'. [ 67s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 67s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 67s] make[4]: Nothing to be done for 'all-am'. [ 67s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 67s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 67s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 67s] make[3]: Nothing to be done for 'all-am'. [ 67s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 67s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 67s] Making all in src [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 67s] Making all in . [ 67s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 67s] CC app.lo [ 67s] CC base64.lo [ 67s] CC bn.lo [ 67s] CC buffer.lo [ 67s] CC c14n.lo [ 67s] CC dl.lo [ 67s] CC enveloped.lo [ 67s] CC errors.lo [ 67s] CC io.lo [ 67s] CC keyinfo.lo [ 67s] CC keys.lo [ 67s] CC keysdata.lo [ 67s] CC keysmngr.lo [ 67s] CC kw_aes_des.lo [ 67s] CC list.lo [ 68s] CC membuf.lo [ 68s] CC nodeset.lo [ 68s] CC parser.lo [ 68s] CC relationship.lo [ 68s] CC soap.lo [ 68s] CC strings.lo [ 68s] CC templates.lo [ 68s] CC transforms.lo [ 68s] CC x509.lo [ 68s] CC xmldsig.lo [ 68s] CC xmlenc.lo [ 68s] CC xmlsec.lo [ 68s] CC xmltree.lo [ 68s] CC xpath.lo [ 68s] CC xslt.lo [ 68s] CCLD libxmlsec1.la [ 69s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 69s] Making all in openssl [ 69s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 69s] CC libxmlsec1_openssl_la-app.lo [ 69s] CC libxmlsec1_openssl_la-bn.lo [ 69s] CC libxmlsec1_openssl_la-ciphers.lo [ 69s] CC libxmlsec1_openssl_la-crypto.lo [ 69s] CC libxmlsec1_openssl_la-digests.lo [ 69s] CC libxmlsec1_openssl_la-evp.lo [ 69s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 69s] CC libxmlsec1_openssl_la-hmac.lo [ 69s] CC libxmlsec1_openssl_la-kw_aes.lo [ 69s] CC libxmlsec1_openssl_la-kw_des.lo [ 69s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 69s] CC libxmlsec1_openssl_la-signatures.lo [ 69s] CC libxmlsec1_openssl_la-symkeys.lo [ 69s] CC libxmlsec1_openssl_la-x509.lo [ 69s] CC libxmlsec1_openssl_la-x509vfy.lo [ 70s] CCLD libxmlsec1-openssl.la [ 70s] libtool: link: warning: `/lib64/libxml2.la' seems to be moved [ 70s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 70s] Making all in gcrypt [ 70s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 70s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 70s] CC libxmlsec1_gcrypt_la-app.lo [ 70s] CC libxmlsec1_gcrypt_la-crypto.lo [ 70s] CC libxmlsec1_gcrypt_la-asn1.lo [ 70s] CC libxmlsec1_gcrypt_la-digests.lo [ 70s] CC libxmlsec1_gcrypt_la-hmac.lo [ 70s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 70s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 70s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 70s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 70s] CC libxmlsec1_gcrypt_la-signatures.lo [ 71s] CCLD libxmlsec1-gcrypt.la [ 71s] libtool: link: warning: `/lib64/libxml2.la' seems to be moved [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 71s] Making all in apps [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 71s] CC xmlsec.o [ 71s] CC crypto.o [ 71s] CC cmdline.o [ 71s] CCLD xmlsec1 [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 71s] Making all in man [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 71s] make[2]: Nothing to be done for 'all'. [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 71s] Making all in docs [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 71s] Copying docs... [ 71s] Making all in api [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 71s] Copying api-docs... [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 71s] make[3]: Nothing to be done for 'all-am'. [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 71s] + exit 0 [ 71s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.U0dEyz [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd xmlsec1-1.2.22 [ 71s] + LANG=C [ 71s] + export LANG [ 71s] + unset DISPLAY [ 71s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 [ 71s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 [ 71s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 install [ 71s] Making install in include [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 71s] Making install in xmlsec [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] Making install in private [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 71s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 71s] /bin/make install-exec-hook [ 71s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 71s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/private [ 71s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 71s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/private' [ 71s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/private' [ 71s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 71s] Making install in openssl [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 71s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 71s] /bin/make install-exec-hook [ 71s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 71s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/openssl [ 71s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 71s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/openssl' [ 71s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/openssl' [ 71s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 71s] Making install in gcrypt [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 71s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 71s] /bin/make install-exec-hook [ 71s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 71s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/gcrypt [ 71s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 71s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/gcrypt' [ 71s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec/gcrypt' [ 71s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] /bin/make install-exec-hook [ 71s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec [ 71s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec' [ 71s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h soap.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/include/xmlsec1/xmlsec' [ 71s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 71s] make[3]: Nothing to be done for 'install-exec-am'. [ 71s] make[3]: Nothing to be done for 'install-data-am'. [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 71s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 71s] Making install in src [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 71s] Making install in . [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 71s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 71s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.22 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1.so.1.2.22 [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so.1; }; }) [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so; }; }) [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1.la [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1.a [ 72s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1.a [ 72s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1.a [ 72s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 72s] make[3]: Nothing to be done for 'install-data-am'. [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 72s] Making install in openssl [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -fPIE -version-info 3:22:2 -pie -o libxmlsec1-openssl.la -rpath /usr/lib64 libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -lssl -lcrypto -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64) [ 72s] libtool: relink: warning: `/lib64/libxml2.la' seems to be moved [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-openssl.so.1.2.22 [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1; }; }) [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so; }; }) [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-openssl.la [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-openssl.a [ 72s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-openssl.a [ 72s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-openssl.a [ 72s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 72s] make[3]: Nothing to be done for 'install-data-am'. [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 72s] Making install in gcrypt [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -fPIE -version-info 3:22:2 -pie -o libxmlsec1-gcrypt.la -rpath /usr/lib64 libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -L/usr/lib64 -lgcrypt -lgpg-error -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64) [ 72s] libtool: relink: warning: `/lib64/libxml2.la' seems to be moved [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-gcrypt.so.1.2.22 [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1; }; }) [ 72s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so; }; }) [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-gcrypt.la [ 72s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 72s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 72s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 72s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 72s] make[3]: Nothing to be done for 'install-data-am'. [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 72s] Making install in apps [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/bin' [ 72s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/bin' [ 72s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib64' [ 72s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/libxmlsec1.la' has not been installed in `/usr/lib64' [ 72s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib64' [ 72s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/bin/xmlsec1 [ 72s] make[2]: Nothing to be done for 'install-data-am'. [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 72s] Making install in man [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 72s] make[2]: Nothing to be done for 'install-exec-am'. [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/man/man1' [ 72s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/man/man1' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 72s] Making install in docs [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 72s] Making install in api [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 72s] make[3]: Nothing to be done for 'install-exec-am'. [ 72s] make[3]: Nothing to be done for 'install-data-am'. [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 72s] make[3]: Nothing to be done for 'install-exec-am'. [ 72s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1 [ 72s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1/images [ 72s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1/api [ 72s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1/api/images [ 72s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1 [ 72s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1 [ 72s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1/images [ 72s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1/api [ 72s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 72s] Makefile:794: recipe for target 'install-data-local' failed [ 72s] make[3]: [install-data-local] Error 1 (ignored) [ 72s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1/api/images [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 72s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 72s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/bin' [ 72s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/bin' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/aclocal' [ 72s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/aclocal' [ 72s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig' [ 72s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig' [ 72s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 72s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 72s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/info/dir [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 -regex '.*\.la$' [ 72s] + xargs rm -f -- [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/info [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/packages [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1 [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc/xmlsec1-1.2.22 [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/gtk-doc [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/doc [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/man [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 -regex '.*/man/man./.*.[0-9]' [ 72s] + xargs rm -f -- [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 72s] + xargs rm -f -- [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 72s] + xargs rm -f -- [ 72s] + _target= [ 72s] + _symlinks=0 [ 72s] + _files=() [ 72s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 [ 72s] + read _file [ 72s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 72s] + _files+=($_file) [ 72s] + read _file [ 72s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 72s] + _files+=($_file) [ 72s] + read _file [ 72s] + test -z [ 72s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 72s] ++ for i in '${_files[*]}' [ 72s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 72s] ++ sort [ 72s] ++ for i in '${_files[*]}' [ 72s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 72s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 72s] ++ seq 1 1 [ 72s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 72s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 72s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 72s] + test 0 = 1 [ 72s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 72s] + _files=() [ 72s] + read _file [ 72s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22 [ 73s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/bin/xmlsec1 [ 73s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-gcrypt.so.1.2.22 [ 73s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1-openssl.so.1.2.22 [ 73s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/lib64/libxmlsec1.so.1.2.22 [ 73s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 73s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 73s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 73s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 73s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 73s] 0 blocks [ 73s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/xmlsec1-debuginfo.manifest [ 73s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/xmlsec1-debugsource.manifest [ 73s] + /usr/lib/rpm/check-buildroot [ 73s] + /usr/lib/rpm//brp-compress [ 73s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 74s] + /usr/lib/rpm/brp-python-hardlink [ 74s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 [ 74s] Processing files: xmlsec1-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.qdmw2Q [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd xmlsec1-1.2.22 [ 74s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1 [ 74s] + export LICENSEDIR [ 74s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1 [ 74s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1 [ 74s] + exit 0 [ 74s] Provides: libxmlsec1.so.1()(64bit) xmlsec1 = 1.2.22-2.2 xmlsec1(aarch-64) = 1.2.22-2.2 [ 74s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Requires(post): /sbin/ldconfig [ 74s] Requires(postun): /sbin/ldconfig [ 74s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcrypto.so.1.0.0()(64bit) libdl.so.2()(64bit) liblzma.so.5()(64bit) libm.so.6()(64bit) libssl.so.1.0.0()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxmlsec1-openssl.so.1()(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libxslt.so.1(LIBXML2_1.0.11)(64bit) libxslt.so.1(LIBXML2_1.0.22)(64bit) libz.so.1()(64bit) [ 74s] Processing files: xmlsec1-debugsource-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Provides: xmlsec1-debugsource = 1.2.22-2.2 xmlsec1-debugsource(aarch-64) = 1.2.22-2.2 [ 74s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 74s] Processing files: xmlsec1-gcrypt-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.pCZpG8 [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd xmlsec1-1.2.22 [ 74s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 74s] + export LICENSEDIR [ 74s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 74s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 74s] + exit 0 [ 74s] Provides: libxmlsec1-gcrypt.so.1()(64bit) xmlsec1-gcrypt = 1.2.22-2.2 xmlsec1-gcrypt(aarch-64) = 1.2.22-2.2 [ 74s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Requires(post): /sbin/ldconfig [ 74s] Requires(postun): /sbin/ldconfig [ 74s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdl.so.2()(64bit) libgcrypt.so.20()(64bit) libgcrypt.so.20(GCRYPT_1.6)(64bit) libgpg-error.so.0()(64bit) liblzma.so.5()(64bit) libm.so.6()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libz.so.1()(64bit) [ 74s] Processing files: xmlsec1-openssl-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.B8baqq [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd xmlsec1-1.2.22 [ 74s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-openssl [ 74s] + export LICENSEDIR [ 74s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-openssl [ 74s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-openssl [ 74s] + exit 0 [ 74s] Provides: libxmlsec1-openssl.so.1()(64bit) xmlsec1-openssl = 1.2.22-2.2 xmlsec1-openssl(aarch-64) = 1.2.22-2.2 [ 74s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Requires(post): /sbin/ldconfig [ 74s] Requires(postun): /sbin/ldconfig [ 74s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcrypto.so.1.0.0()(64bit) libdl.so.2()(64bit) liblzma.so.5()(64bit) libm.so.6()(64bit) libssl.so.1.0.0()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libz.so.1()(64bit) [ 74s] Processing files: xmlsec1-devel-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.W7XRfI [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd xmlsec1-1.2.22 [ 74s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-devel [ 74s] + export LICENSEDIR [ 74s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-devel [ 74s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-devel [ 74s] + exit 0 [ 74s] Provides: pkgconfig(xmlsec1) = 1.2.22 pkgconfig(xmlsec1-gcrypt) = 1.2.22 pkgconfig(xmlsec1-openssl) = 1.2.22 xmlsec1-devel = 1.2.22-2.2 xmlsec1-devel(aarch-64) = 1.2.22-2.2 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1()(64bit) libxmlsec1-openssl.so.1()(64bit) libxmlsec1.so.1()(64bit) pkgconfig(libxml-2.0) >= 2.7.4 pkgconfig(libxslt) >= 1.0.20 [ 74s] Processing files: xmlsec1-devel-static-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.NsZwI1 [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd xmlsec1-1.2.22 [ 74s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-devel-static [ 74s] + export LICENSEDIR [ 74s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-devel-static [ 74s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64/usr/share/licenses/xmlsec1-devel-static [ 74s] + exit 0 [ 74s] Provides: xmlsec1-devel-static = 1.2.22-2.2 xmlsec1-devel-static(aarch-64) = 1.2.22-2.2 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Processing files: xmlsec1-debuginfo-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] warning: File listed twice: /usr/lib/debug/.build-id [ 74s] Provides: xmlsec1-debuginfo = 1.2.22-2.2 xmlsec1-debuginfo(aarch-64) = 1.2.22-2.2 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.22-2.2 xmlsec1-gcrypt-debuginfo(aarch-64) = 1.2.22-2.2 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Processing files: xmlsec1-openssl-debuginfo-1.2.22-2.2.aarch64 [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Provides: xmlsec1-openssl-debuginfo = 1.2.22-2.2 xmlsec1-openssl-debuginfo(aarch-64) = 1.2.22-2.2 [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 [ 74s] warning: Could not canonicalize hostname: obsnw13 [ 74s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-2.2.src.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-1.2.22-2.2.aarch64.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debugsource-1.2.22-2.2.aarch64.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-1.2.22-2.2.aarch64.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-1.2.22-2.2.aarch64.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-1.2.22-2.2.aarch64.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-static-1.2.22-2.2.aarch64.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debuginfo-1.2.22-2.2.aarch64.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-debuginfo-1.2.22-2.2.aarch64.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-debuginfo-1.2.22-2.2.aarch64.rpm [ 76s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5iP01V [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd xmlsec1-1.2.22 [ 76s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.aarch64 [ 76s] + exit 0 [ 76s] ... checking for files with abuild user/group [ 76s] ... creating baselibs [ 76s] ... comparing built packages with the former built [ 76s] /usr/lib/build/pkg-diff.sh [ 76s] compare /.build.oldpackages/xmlsec1-1.2.22-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-2.2.src.rpm [ 76s] This is not a prerelease project. Compare the project name. [ 76s] comparing rpmtags [ 76s] comparing RELEASE [ 77s] comparing PROVIDES [ 77s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] RPM meta information is identical [ 77s] compare /.build.oldpackages/xmlsec1-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-1.2.22-2.2.aarch64.rpm [ 77s] Comparing xmlsec1-1.2.22-2.1.aarch64.rpm to xmlsec1-1.2.22-2.2.aarch64.rpm [ 77s] This is not a prerelease project. Compare the project name. [ 77s] comparing rpmtags [ 77s] comparing RELEASE [ 77s] comparing PROVIDES [ 77s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] creating rename script [ 77s] RPM file checksum differs. [ 77s] Extracting packages [ 77s] /usr/bin/xmlsec1 differs in assembler output [ 77s] --- /tmp/tmp.pdJYR21215/tmp.moNVh21634 2018-01-19 15:13:27.654534856 +0000 [ 77s] +++ /tmp/tmp.pdJYR21215/tmp.KNaip21657 2018-01-19 15:13:27.690534344 +0000 [ 77s] @@ -4558,7 +4558,7 @@ [ 77s] mov w1, # x1 // #1 [ 77s] str w1, [x0] [ 77s] bl [ 77s] - mov w0, # x51a8 // #20904 [ 77s] + mov w0, # x51ab // #20907 [ 77s] bl [ 77s] bl <__xmlTreeIndentString@plt> [ 77s] mov x1, x0 [ 77s] /usr/bin/xmlsec1 differs in ELF section .text [ 77s] --- /tmp/tmp.pdJYR21215/tmp.moNVh21634 2018-01-19 15:13:27.782533033 +0000 [ 77s] +++ /tmp/tmp.pdJYR21215/tmp.KNaip21657 2018-01-19 15:13:27.786532976 +0000 [ 77s] @@ -953,7 +953,7 @@ [ 77s] 8080 c0000090 00003c91 000040b9 1f000071 ......<...@....q [ 77s] 8090 60000054 00008052 79000014 c0000090 `..T...Ry....... [ 77s] 80a0 00003c91 21008052 010000b9 81efff97 ..<.!..R........ [ 77s] - 80b0 00358a52 bfefff97 72efff97 e10300aa .5.R....r....... [ 77s] + 80b0 60358a52 bfefff97 72efff97 e10300aa `5.R....r....... [ 77s] 80c0 200000d0 00003491 200000f9 51efff97 .....4. ...Q... [ 77s] 80d0 e10300aa 20008052 200000b9 49efff97 .... ..R ...I... [ 77s] 80e0 e10300aa c0000090 00203c91 010000f9 ......... <..... [ 77s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debuginfo-1.2.22-2.2.aarch64.rpm [ 77s] skipping -debuginfo package [ 77s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debugsource-1.2.22-2.2.aarch64.rpm [ 77s] Comparing xmlsec1-debugsource-1.2.22-2.1.aarch64.rpm to xmlsec1-debugsource-1.2.22-2.2.aarch64.rpm [ 78s] This is not a prerelease project. Compare the project name. [ 78s] comparing rpmtags [ 78s] comparing RELEASE [ 78s] comparing PROVIDES [ 78s] comparing scripts [ 78s] comparing filelist [ 78s] comparing file checksum [ 78s] creating rename script [ 78s] RPM meta information is identical [ 78s] compare /.build.oldpackages/xmlsec1-devel-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-1.2.22-2.2.aarch64.rpm [ 78s] Comparing xmlsec1-devel-1.2.22-2.1.aarch64.rpm to xmlsec1-devel-1.2.22-2.2.aarch64.rpm [ 78s] This is not a prerelease project. Compare the project name. [ 78s] comparing rpmtags [ 78s] comparing RELEASE [ 78s] comparing PROVIDES [ 78s] comparing scripts [ 78s] comparing filelist [ 78s] comparing file checksum [ 78s] creating rename script [ 78s] RPM file checksum differs. [ 78s] Extracting packages [ 78s] /usr/lib64/xmlsec1Conf.sh differs (ASCII text) [ 78s] --- old//usr/lib64/xmlsec1Conf.sh 2017-08-29 01:32:21.000000000 +0000 [ 78s] +++ new//usr/lib64/xmlsec1Conf.sh 2018-01-19 15:13:22.000000000 +0000 [ 78s] @@ -8,6 +8,6 @@ [ 78s] [ 78s] XMLSEC_LIBDIR="/usr/lib64" [ 78s] XMLSEC_INCLUDEDIR=" -D__XMLSEC_FUNCTION__=__func__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_GOST2012=1 -DXMLSEC_NO_CRYPTO_DYNAMIC_LOADING=1 -I/usr/include/xmlsec1 -I/usr/include/libxml2 -I/usr/include/libxml2 -DXMLSEC_OPENSSL_100=1 -DXMLSEC_CRYPTO_OPENSSL=1" [ 78s] -XMLSEC_LIBS="-L/usr/lib64 -lxmlsec1-openssl -lxmlsec1 -lxml2 -lxslt -lxml2 -lz -llzma -lm -ldl -lm -lxml2 -lssl -lcrypto " [ 78s] +XMLSEC_LIBS="-L/usr/lib64 -lxmlsec1-openssl -lxmlsec1 -lxml2 -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lssl -lcrypto " [ 78s] MODULE_VERSION="xmlsec-1.2.22-openssl" [ 78s] [ 78s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-static-1.2.22-2.2.aarch64.rpm [ 78s] Comparing xmlsec1-devel-static-1.2.22-2.1.aarch64.rpm to xmlsec1-devel-static-1.2.22-2.2.aarch64.rpm [ 78s] This is not a prerelease project. Compare the project name. [ 78s] comparing rpmtags [ 78s] comparing RELEASE [ 78s] comparing PROVIDES [ 78s] comparing scripts [ 78s] comparing filelist [ 78s] comparing file checksum [ 79s] creating rename script [ 79s] RPM file checksum differs. [ 79s] Extracting packages [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-asn1.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-asymkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] /usr/lib64/libxmlsec1_gcrypt_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-evp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-evp_signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-kt_rsa.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 80s] /usr/lib64/libxmlsec1_openssl_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/libxmlsec1_openssl_la-x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/libxmlsec1_openssl_la-x509vfy.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/base64.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/buffer.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/c14n.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/dl.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/enveloped.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/errors.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/io.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/keyinfo.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/keys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 81s] /usr/lib64/keysdata.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/keysmngr.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/kw_aes_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/list.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/membuf.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/nodeset.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/parser.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/relationship.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/soap.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/strings.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/templates.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/transforms.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/xmldsig.o: only difference was in build-id or gnu_debuglink, GOOD. [ 82s] /usr/lib64/xmlenc.o: only difference was in build-id or gnu_debuglink, GOOD. [ 83s] /usr/lib64/xmlsec.o: only difference was in build-id or gnu_debuglink, GOOD. [ 83s] /usr/lib64/xmltree.o: only difference was in build-id or gnu_debuglink, GOOD. [ 83s] /usr/lib64/xpath.o: only difference was in build-id or gnu_debuglink, GOOD. [ 83s] /usr/lib64/xslt.o: only difference was in build-id or gnu_debuglink, GOOD. [ 83s] Package content is identical [ 83s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-1.2.22-2.2.aarch64.rpm [ 83s] Comparing xmlsec1-gcrypt-1.2.22-2.1.aarch64.rpm to xmlsec1-gcrypt-1.2.22-2.2.aarch64.rpm [ 83s] This is not a prerelease project. Compare the project name. [ 83s] comparing rpmtags [ 83s] comparing RELEASE [ 83s] comparing PROVIDES [ 83s] comparing scripts [ 83s] comparing filelist [ 83s] comparing file checksum [ 83s] creating rename script [ 83s] RPM file checksum differs. [ 83s] Extracting packages [ 84s] /usr/lib64/libxmlsec1-gcrypt.so.1.2.22: only difference was in build-id or gnu_debuglink, GOOD. [ 84s] Package content is identical [ 84s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-debuginfo-1.2.22-2.2.aarch64.rpm [ 84s] skipping -debuginfo package [ 84s] compare /.build.oldpackages/xmlsec1-openssl-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-1.2.22-2.2.aarch64.rpm [ 84s] Comparing xmlsec1-openssl-1.2.22-2.1.aarch64.rpm to xmlsec1-openssl-1.2.22-2.2.aarch64.rpm [ 84s] This is not a prerelease project. Compare the project name. [ 84s] comparing rpmtags [ 84s] comparing RELEASE [ 84s] comparing PROVIDES [ 84s] comparing scripts [ 84s] comparing filelist [ 84s] comparing file checksum [ 84s] creating rename script [ 84s] RPM file checksum differs. [ 84s] Extracting packages [ 85s] /usr/lib64/libxmlsec1-openssl.so.1.2.22: only difference was in build-id or gnu_debuglink, GOOD. [ 85s] Package content is identical [ 85s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.22-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-debuginfo-1.2.22-2.2.aarch64.rpm [ 85s] skipping -debuginfo package [ 85s] [ 85s] obsnw13 finished "build xmlsec1.spec" at Fri Jan 19 15:13:35 UTC 2018. [ 85s] Retried build at Thu Jan 25 14:27:57 2018 returned same result, skipped Retried build at Fri Feb 2 15:07:37 2018 returned same result, skipped Retried build at Fri Feb 16 17:58:41 2018 returned same result, skipped Retried build at Fri Mar 9 23:19:26 2018 returned same result, skipped Retried build at Fri Mar 30 17:57:05 2018 returned same result, skipped Retried build at Fri Mar 30 19:33:36 2018 returned same result, skipped Retried build at Fri Apr 6 19:51:04 2018 returned same result, skipped Retried build at Fri Apr 13 18:06:36 2018 returned same result, skipped Retried build at Fri May 11 20:53:26 2018 returned same result, skipped Retried build at Fri May 11 22:31:53 2018 returned same result, skipped Retried build at Fri Jun 15 18:44:33 2018 returned same result, skipped Retried build at Fri Jun 22 18:07:40 2018 returned same result, skipped Retried build at Fri Jul 6 17:23:42 2018 returned same result, skipped Retried build at Fri Jul 6 18:58:50 2018 returned same result, skipped Retried build at Fri Jul 13 20:12:39 2018 returned same result, skipped Retried build at Fri Jul 13 21:37:23 2018 returned same result, skipped Retried build at Fri Aug 17 09:35:06 2018 returned same result, skipped Retried build at Wed Aug 22 08:33:43 2018 returned same result, skipped Retried build at Wed Aug 22 09:56:21 2018 returned same result, skipped Retried build at Fri Aug 24 18:33:41 2018 returned same result, skipped Retried build at Tue Jan 8 01:26:08 2019 returned same result, skipped Retried build at Tue Jan 8 03:03:02 2019 returned same result, skipped Retried build at Fri Jan 11 01:52:05 2019 returned same result, skipped Retried build at Fri Jan 18 13:03:39 2019 returned same result, skipped Retried build at Wed Apr 17 12:06:56 2019 returned same result, skipped Retried build at Wed Apr 17 13:41:24 2019 returned same result, skipped Retried build at Thu Apr 18 09:45:12 2019 returned same result, skipped Retried build at Mon Apr 29 09:24:59 2019 returned same result, skipped Retried build at Tue May 7 02:35:52 2019 returned same result, skipped Retried build at Tue May 7 04:15:53 2019 returned same result, skipped Retried build at Fri May 17 00:43:32 2019 returned same result, skipped Retried build at Fri Jun 28 09:47:51 2019 returned same result, skipped Retried build at Tue Jul 16 22:50:35 2019 returned same result, skipped Retried build at Fri Sep 20 00:52:56 2019 returned same result, skipped Retried build at Fri Sep 20 02:41:28 2019 returned same result, skipped Retried build at Fri Oct 11 01:40:39 2019 returned same result, skipped Retried build at Fri Oct 11 03:12:23 2019 returned same result, skipped Retried build at Thu Oct 17 09:39:26 2019 returned same result, skipped