[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw08 started "build _service:gbs:xmlsec1.spec" at Fri Jan 19 15:00:47 UTC 2018. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen:4.0:Unified' repository 'standard' arch 'armv7l' srcmd5 'b431a67a482caf2155c141a775c2cfc5' [ 0s] [ 0s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [26/40] preinstalling coreutils... [ 9s] [27/40] preinstalling libacl... [ 9s] [28/40] preinstalling libblkid... [ 9s] [29/40] preinstalling libreadline... [ 9s] [30/40] preinstalling smack... [ 9s] [31/40] preinstalling bzip2... [ 9s] [32/40] preinstalling libmagic... [ 9s] [33/40] preinstalling libxml2... [ 9s] [34/40] preinstalling libmount... [ 9s] [35/40] preinstalling tar... [ 9s] [36/40] preinstalling util-linux... [ 9s] [37/40] preinstalling util-linux-su... [ 9s] [38/40] preinstalling nss... [ 9s] [39/40] preinstalling libsoftokn3... [ 9s] [40/40] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 14s] reordering...cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 14s] [1/110] installing libmagic-data-5.32-4.3 [ 14s] [2/110] installing setup-0.9-2.10 [ 14s] warning: /etc/profile created as /etc/profile.rpmnew [ 14s] [3/110] installing filesystem-3.1-2.1 [ 14s] [4/110] installing glibc-2.24-4.12 [ 15s] [5/110] installing libatomic-6.2.1-3.13 [ 15s] [6/110] installing libgcc-6.2.1-3.13 [ 15s] [7/110] installing bash-3.2.57-3.1 [ 15s] [8/110] installing binutils-2.27-3.32 [ 15s] [9/110] installing cpio-2.11-2.1 [ 15s] [10/110] installing diffutils-3.3-2.1 [ 15s] [11/110] installing fdupes-1.40-2.66 [ 15s] [12/110] installing findutils-4.3.8-3.38 [ 15s] [13/110] installing hostname-3.12-2.1 [ 15s] [14/110] installing libattr-2.4.47-1.1 [ 15s] [15/110] installing libbz2-1.0.6-2.57 [ 15s] [16/110] installing libcap-2.24-2.66 [ 15s] [17/110] installing libelf-0.153-2.26 [ 15s] [18/110] installing libext2fs-1.43.4-2.2 [ 15s] [19/110] installing libfreebl3-3.34.1-3.2 [ 15s] [20/110] installing libgfortran-6.2.1-3.13 [ 15s] [21/110] installing libgomp-6.2.1-3.13 [ 16s] [22/110] installing libgpg-error-1.27-3.1 [ 16s] [23/110] installing libitm-6.2.1-3.13 [ 16s] [24/110] installing libltdl-2.4.2-2.52 [ 17s] [25/110] installing liblua-5.1.4-2.16 [ 18s] [26/110] installing liblzma-5.2.2-2.52 [ 18s] [27/110] installing libpcre-8.39-3.1 [ 18s] [28/110] installing libpopt-1.16-2.16 [ 18s] [29/110] installing libsmack-1.3.1-4.6 [ 18s] [30/110] installing libsmartcols-2.30-6.1 [ 18s] [31/110] installing libsqlite-3.18.0-5.5 [ 18s] [32/110] installing libstdc++-6.2.1-3.13 [ 18s] [33/110] installing libuuid-2.30-6.1 [ 18s] [34/110] installing m4-1.4.17-2.1 [ 18s] [35/110] installing net-tools-2.0_20121208git-2.1 [ 18s] [36/110] installing nspr-4.12-2.16 [ 18s] [37/110] installing patch-2.7-2.16 [ 18s] [38/110] installing pkg-config-0.28-3.35 [ 18s] [39/110] installing sed-4.1c-2.1 [ 18s] [40/110] installing update-alternatives-1.18.15-2.1 [ 18s] [41/110] installing which-2.20-2.1 [ 18s] [42/110] installing zlib-1.2.11-2.63 [ 18s] [43/110] installing build-compare-2015.04.28-2.36 [ 18s] [44/110] installing libstdc++-devel-6.2.1-3.13 [ 19s] [45/110] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 25s] [46/110] installing terminfo-base-full-5.9-3.28 [ 25s] [47/110] installing cpp-6.2.1-3.13 [ 26s] [48/110] installing gcc-c++-6.2.1-3.13 [ 26s] [49/110] installing xz-devel-5.2.2-2.52 [ 26s] [50/110] installing coreutils-6.9-3.2 [ 26s] [51/110] installing db4-4.8.30.NC-2.61 [ 26s] [52/110] installing gawk-3.1.5-3.1 [ 27s] [53/110] installing grep-2.5.2-3.1 [ 27s] [54/110] installing libacl-2.2.52-2.64 [ 27s] [55/110] installing libasm-0.153-2.26 [ 27s] [56/110] installing libblkid-2.30-6.1 [ 27s] [57/110] installing libcc1-6.2.1-3.13 [ 27s] [58/110] installing libgcrypt-1.8.1-3.1 [ 27s] [59/110] installing libopenssl-1.0.2m-3.5 [ 27s] [60/110] installing libubsan-6.2.1-3.13 [ 27s] [61/110] installing make-4.0-2.16 [ 27s] [62/110] installing nss-certs-3.34.1-3.2 [ 27s] [63/110] installing smack-1.3.1-4.6 [ 27s] [64/110] installing bzip2-1.0.6-2.57 [ 27s] [65/110] installing libmagic-5.32-4.3 [ 27s] [66/110] installing libxml2-2.9.7-3.3 [ 27s] [67/110] installing xz-5.2.2-2.52 [ 27s] [68/110] installing libdw-0.153-2.26 [ 27s] [69/110] installing linux-glibc-devel-3.10-2.64 [ 28s] [70/110] installing file-5.32-4.3 [ 28s] [71/110] installing glibc-locale-2.24-4.12 [ 28s] [72/110] installing libmount-2.30-6.1 [ 28s] [73/110] installing libncurses-5.9-3.28 [ 28s] [74/110] installing libncurses6-5.9-3.28 [ 28s] [75/110] installing openssl-1.0.2m-3.5 [ 28s] [76/110] installing tar-1.17-3.1 [ 28s] [77/110] installing gzip-1.3.12-3.38 [ 28s] [78/110] installing libfdisk-2.30-6.1 [ 28s] [79/110] installing libxslt-1.1.31-4.1 [ 28s] [80/110] installing pam-1.1.6-3.1 [ 28s] [81/110] installing perl-5.20.0-3.13 [ 29s] [82/110] installing tzdata-2017c-3.1 [ 30s] [83/110] installing elfutils-0.153-2.26 [ 30s] [84/110] installing gcc-6.2.1-3.13 [ 30s] [85/110] installing build-mkbaselibs-20120927-2.1 [ 30s] [86/110] installing glibc-devel-2.24-4.12 [ 30s] [87/110] installing qemu-accel-x86_64-armv7l-0.4-3.8 [ 36s] [88/110] installing autoconf-2.69-2.64 [ 36s] [89/110] installing less-466-2.1 [ 36s] [90/110] installing libreadline-5.2-2.57 [ 36s] [91/110] installing procps-ng-3.3.9-4.1 [ 36s] [92/110] installing libxslt-tools-1.1.31-4.1 [ 36s] [93/110] installing ncurses-devel-5.9-3.28 [ 36s] [94/110] installing readline-devel-5.2-2.57 [ 37s] [95/110] installing zlib-devel-1.2.11-2.63 [ 37s] [96/110] installing automake-1.14.1-2.51 [ 37s] [97/110] installing libxml2-tools-2.9.7-3.3 [ 37s] [98/110] installing build-20120927-2.1 [ 37s] [99/110] installing libgpg-error-devel-1.27-3.1 [ 37s] [100/110] installing util-linux-2.30-6.1 [ 37s] [101/110] installing libopenssl-devel-1.0.2m-3.5 [ 37s] [102/110] installing libtool-2.4.2-2.52 [ 37s] [103/110] installing util-linux-su-2.30-6.1 [ 37s] [104/110] installing libgcrypt-devel-1.8.1-3.1 [ 37s] [105/110] installing libxml2-devel-2.9.7-3.3 [ 37s] [106/110] installing libxslt-devel-1.1.31-4.1 [ 37s] [107/110] installing nss-3.34.1-3.2 [ 37s] [108/110] installing libsoftokn3-3.34.1-3.2 [ 37s] [109/110] installing rpm-4.11.0.1-4.2 [ 37s] [110/110] installing rpm-build-4.11.0.1-4.2 [ 37s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 38s] build target is armv7l-tizen-linux [ 38s] ----------------------------------------------------------------- [ 38s] I have the following modifications for xmlsec1.spec: [ 38s] 5c5 [ 38s] < Release: 0 [ 38s] --- [ 38s] > Release: 2.2 [ 38s] 188a189 [ 38s] > %changelog [ 38s] ----------------------------------------------------------------- [ 38s] ----- building xmlsec1.spec (user abuild) [ 38s] ----------------------------------------------------------------- [ 38s] ----------------------------------------------------------------- [ 38s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/standard/b431a67a482caf2155c141a775c2cfc5-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 38s] Building target platforms: armv7l-tizen-linux [ 38s] Building for target armv7l-tizen-linux [ 38s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.1nOsIV [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + rm -rf xmlsec1-1.2.22 [ 38s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.22.tar.gz [ 38s] + /bin/tar -xf - [ 38s] + STATUS=0 [ 38s] + '[' 0 -ne 0 ']' [ 38s] + cd xmlsec1-1.2.22 [ 38s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 38s] + echo 'Patch #0 (d4d3535-to-1ca1a13.diff):' [ 38s] Patch #0 (d4d3535-to-1ca1a13.diff): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/d4d3535-to-1ca1a13.diff [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file include/xmlsec/keyinfo.h [ 38s] patching file include/xmlsec/xmldsig.h [ 38s] patching file src/errors.c [ 38s] patching file src/io.c [ 38s] patching file src/openssl/digests.c [ 38s] patching file src/openssl/x509vfy.c [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch):' [ 38s] Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file include/xmlsec/keyinfo.h [ 38s] patching file include/xmlsec/xmldsig.h [ 38s] patching file src/errors.c [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #2 (0003-Add-gitignore-file.patch):' [ 38s] Patch #2 (0003-Add-gitignore-file.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-gitignore-file.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file .gitignore [ 38s] + echo 'Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch):' [ 38s] Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-Replace-vulnerable-function-to-thread-safety.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/errors.c [ 38s] patching file src/io.c [ 38s] patching file src/openssl/app.c [ 38s] patching file src/templates.c [ 38s] patching file src/transforms.c [ 38s] patching file src/xmldsig.c [ 38s] patching file src/xmltree.c [ 38s] patching file src/xpath.c [ 38s] + echo 'Patch #4 (0005-Fix-svace-defects.patch):' [ 38s] Patch #4 (0005-Fix-svace-defects.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-Fix-svace-defects.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/bn.c [ 38s] patching file src/templates.c [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #5 (0006-Refine-legacy-code-about-error-handling.patch):' [ 38s] Patch #5 (0006-Refine-legacy-code-about-error-handling.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-Refine-legacy-code-about-error-handling.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/errors.c [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #6 (0007-Fix-svace-defect.patch):' [ 38s] Patch #6 (0007-Fix-svace-defect.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-Fix-svace-defect.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch):' [ 38s] Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file include/xmlsec/xmldsig.h [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch):' [ 38s] Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-Add-NULL-check-logic-on-custum-code.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #9 (0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch):' [ 38s] Patch #9 (0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file include/xmlsec/xmldsig.h [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #10 (0011-Seperate-proxyCtxPtr-according-to-purpose.patch):' [ 38s] Patch #10 (0011-Seperate-proxyCtxPtr-according-to-purpose.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-Seperate-proxyCtxPtr-according-to-purpose.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file include/xmlsec/xmldsig.h [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #11 (0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch):' [ 38s] Patch #11 (0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #12 (0013-Add-default-section-to-switch-for-error-handling.patch):' [ 38s] Patch #12 (0013-Add-default-section-to-switch-for-error-handling.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0013-Add-default-section-to-switch-for-error-handling.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/xpath.c [ 38s] + echo 'Patch #13 (0014-Fix-memory-leak-on-upstream-code.patch):' [ 38s] Patch #13 (0014-Fix-memory-leak-on-upstream-code.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0014-Fix-memory-leak-on-upstream-code.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/relationship.c [ 38s] + echo 'Patch #14 (0015-Fix-memory-leak-on-custom-code.patch):' [ 38s] Patch #14 (0015-Fix-memory-leak-on-custom-code.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0015-Fix-memory-leak-on-custom-code.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/xmldsig.c [ 38s] + echo 'Patch #15 (0016-Fix-svace-defects.patch):' [ 38s] Patch #15 (0016-Fix-svace-defects.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0016-Fix-svace-defects.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/openssl/signatures.c [ 38s] + echo 'Patch #16 (0017-Fix-compilation-warnings.patch):' [ 38s] Patch #16 (0017-Fix-compilation-warnings.patch): [ 38s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0017-Fix-compilation-warnings.patch [ 38s] + /bin/patch -p1 --fuzz=2 [ 38s] patching file src/errors.c [ 38s] patching file src/io.c [ 38s] patching file src/openssl/app.c [ 38s] patching file src/xmldsig.c [ 38s] patching file src/xmltree.c [ 38s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 38s] + exit 0 [ 38s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.gwIw3R [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd xmlsec1-1.2.22 [ 38s] ++ uname -m [ 38s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 38s] + LANG=C [ 38s] + export LANG [ 38s] + unset DISPLAY [ 38s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 38s] + export CFLAGS [ 38s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 38s] + export CXXFLAGS [ 38s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 38s] + export FFLAGS [ 38s] + LDFLAGS= [ 38s] + export LDFLAGS [ 38s] + LD_AS_NEEDED=1 [ 38s] + export LD_AS_NEEDED [ 38s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 38s] + export CFLAGS [ 38s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 38s] + export CXXFLAGS [ 38s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 38s] + export FFLAGS [ 38s] + autoreconf -v --install --force [ 41s] autoreconf: Entering directory `.' [ 41s] autoreconf: configure.ac: not using Gettext [ 42s] autoreconf: running: aclocal --force -I m4 [ 50s] autoreconf: configure.ac: tracing [ 51s] autoreconf: running: libtoolize --copy --force [ 52s] libtoolize: putting auxiliary files in `.'. [ 52s] libtoolize: copying file `./ltmain.sh' [ 52s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 52s] libtoolize: copying file `m4/libtool.m4' [ 52s] libtoolize: copying file `m4/ltoptions.m4' [ 52s] libtoolize: copying file `m4/ltsugar.m4' [ 52s] libtoolize: copying file `m4/ltversion.m4' [ 52s] libtoolize: copying file `m4/lt~obsolete.m4' [ 60s] autoreconf: running: /usr/bin/autoconf --force [ 64s] autoreconf: running: /usr/bin/autoheader --force [ 66s] autoreconf: running: automake --add-missing --copy --force-missing [ 78s] autoreconf: Leaving directory `.' [ 78s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 78s] configure: WARNING: unrecognized options: --enable-dynamic [ 79s] checking build system type... armv7l-tizen-linux-gnueabi [ 79s] checking host system type... armv7l-tizen-linux-gnueabi [ 79s] checking for a BSD-compatible install... /bin/install -c [ 79s] checking whether build environment is sane... yes [ 79s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 79s] checking for gawk... gawk [ 79s] checking whether make sets $(MAKE)... yes [ 79s] checking whether make supports nested variables... yes [ 79s] checking whether UID '399' is supported by ustar format... yes [ 79s] checking whether GID '399' is supported by ustar format... yes [ 79s] checking how to create a ustar tar archive... gnutar [ 79s] checking whether to enable maintainer-specific portions of Makefiles... no [ 79s] checking whether make supports nested variables... (cached) yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 79s] checking whether the C compiler works... yes [ 79s] checking for C compiler default output file name... a.out [ 79s] checking for suffix of executables... [ 79s] checking whether we are cross compiling... no [ 79s] checking for suffix of object files... o [ 79s] checking whether we are using the GNU C compiler... yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 79s] checking for style of include used by make... GNU [ 79s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 79s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 79s] checking for grep that handles long lines and -e... /bin/grep [ 79s] checking for egrep... /bin/grep -E [ 79s] checking for ANSI C header files... yes [ 79s] checking how to print strings... printf [ 79s] checking for a sed that does not truncate output... /bin/sed [ 79s] checking for fgrep... /bin/grep -F [ 79s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 79s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 79s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 79s] checking the name lister (/bin/nm -B) interface... BSD nm [ 79s] checking whether ln -s works... yes [ 79s] checking the maximum length of command line arguments... 1572864 [ 79s] checking whether the shell understands some XSI constructs... yes [ 79s] checking whether the shell understands "+="... yes [ 79s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 79s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 79s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 79s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 79s] checking for objdump... objdump [ 79s] checking how to recognize dependent libraries... pass_all [ 79s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 79s] checking for dlltool... no [ 79s] checking how to associate runtime and link libraries... printf %s\n [ 79s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 79s] checking for ar... ar [ 79s] checking for archiver @FILE support... @ [ 79s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 79s] checking for strip... strip [ 79s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 79s] checking for ranlib... ranlib [ 79s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 79s] checking for sysroot... no [ 79s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 79s] checking for mt... no [ 79s] checking if : is a manifest tool... no [ 79s] checking for sys/types.h... yes [ 79s] checking for sys/stat.h... yes [ 79s] checking for stdlib.h... yes [ 80s] checking for string.h... yes [ 80s] checking for memory.h... yes [ 80s] checking for strings.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for unistd.h... yes [ 80s] checking for dlfcn.h... yes [ 80s] checking for objdir... .libs [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 80s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 80s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 80s] checking whether -lc should be explicitly linked in... no [ 80s] checking dynamic linker characteristics... GNU/Linux ld.so [ 80s] checking how to hardcode library paths into programs... immediate [ 80s] checking whether stripping libraries is possible... yes [ 80s] checking if libtool supports shared libraries... yes [ 80s] checking whether to build shared libraries... yes [ 80s] checking whether to build static libraries... yes [ 80s] checking for cp... /bin/cp [ 80s] checking for mv... /bin/mv [ 80s] checking for tar... /bin/tar [ 80s] checking for perl... /bin/perl [ 80s] checking for dirent.h that defines DIR... yes [ 80s] checking for library containing opendir... none required [ 80s] checking for ANSI C header files... (cached) yes [ 80s] checking stdio.h usability... yes [ 80s] checking stdio.h presence... yes [ 80s] checking for stdio.h... yes [ 80s] checking for stdlib.h... (cached) yes [ 80s] checking for string.h... (cached) yes [ 80s] checking ctype.h usability... yes [ 80s] checking ctype.h presence... yes [ 80s] checking for ctype.h... yes [ 80s] checking errno.h usability... yes [ 80s] checking errno.h presence... yes [ 80s] checking for errno.h... yes [ 80s] checking ansidecl.h usability... no [ 80s] checking ansidecl.h presence... no [ 80s] checking for ansidecl.h... no [ 80s] checking time.h usability... yes [ 80s] checking time.h presence... yes [ 80s] checking for time.h... yes [ 80s] checking for strchr... yes [ 80s] checking for strrchr... yes [ 80s] checking for printf... yes [ 80s] checking for sprintf... yes [ 80s] checking for fprintf... yes [ 81s] checking for snprintf... yes [ 81s] checking for vfprintf... yes [ 81s] checking for vsprintf... yes [ 81s] checking for vsnprintf... yes [ 81s] checking for sscanf... yes [ 81s] checking for timegm... yes [ 81s] checking for development environment... no [ 81s] checking for man pages build... no [ 81s] checking for docs build... no [ 81s] checking for __FUNCTION__ or __func__... __func__ [ 81s] checking size of size_t... 4 [ 81s] checking for pkg-config... yes [ 81s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 81s] checking pkg-config is at least version 0.9.0... yes [ 81s] checking for LIBXML... yes [ 81s] checking for LIBXSLT... yes [ 81s] checking for OPENSSL... no [ 81s] checking for OPENSSL... yes [ 81s] checking for NSS... no [ 82s] checking for NSS... no [ 82s] checking for NSS... no [ 82s] checking for NSS... no [ 82s] checking for nspr libraries >= 4.4.1... no [ 82s] checking for nss libraries >= 3.9... no [ 82s] checking for GCRYPT... no [ 82s] checking for GCRYPT... no [ 82s] checking for GCRYPT... no [ 82s] checking for gcrypt libraries >= 1.4.0... checking for gnutls libraries >= 2.8.0... no [ 82s] checking for mscrypto libraries... none [ 82s] checking for default crypto library... yes ('openssl') [ 82s] checking for MD5 support... yes [ 82s] checking for RIPEMD-160 support... yes [ 82s] checking for SHA1 support... yes [ 82s] checking for SHA224 support... yes [ 82s] checking for SHA256 support... yes [ 82s] checking for SHA384 support... yes [ 82s] checking for SHA512 support... yes [ 82s] checking for HMAC support... yes [ 82s] checking for DSA support... yes [ 82s] checking for RSA support... yes [ 82s] checking for x509 support... yes [ 82s] checking for DES support... yes [ 82s] checking for AES support... yes [ 82s] checking for GOST support... no [ 82s] checking for EXPERMIENTAL GOST2012 support... no [ 82s] checking for XMLDSig support... yes [ 82s] checking for XMLEnc support... yes [ 82s] checking for xmlsec-crypto dynamic loading support... no [ 82s] checking for xmlsec-crypto dynamic loading support in command line tool... no [ 82s] checking for docs folder... $(datadir)/doc/xmlsec1 [ 82s] checking for Simple Keys Manager testing... yes [ 82s] checking for templates testing... yes [ 82s] checking for debugging... no [ 82s] checking for profiling... no [ 82s] checking for pedantic... no [ 82s] checking for static linking... no [ 82s] checking that generated files are newer than configure... done [ 82s] configure: creating ./config.status [ 83s] config.status: creating include/xmlsec/openssl/Makefile [ 83s] config.status: creating src/openssl/Makefile [ 83s] config.status: creating include/xmlsec/gcrypt/Makefile [ 83s] config.status: creating src/gcrypt/Makefile [ 83s] config.status: creating include/xmlsec/version.h [ 83s] config.status: creating Makefile [ 83s] config.status: creating include/Makefile [ 83s] config.status: creating include/xmlsec/Makefile [ 83s] config.status: creating include/xmlsec/private/Makefile [ 83s] config.status: creating src/Makefile [ 83s] config.status: creating apps/Makefile [ 83s] config.status: creating docs/Makefile [ 83s] config.status: creating docs/api/Makefile [ 83s] config.status: creating man/Makefile [ 83s] config.status: creating xmlsec1-openssl.pc [ 83s] config.status: creating xmlsec1-gnutls.pc [ 83s] config.status: creating xmlsec1-gcrypt.pc [ 83s] config.status: creating xmlsec1-nss.pc [ 83s] config.status: creating xmlsec1.spec [ 83s] config.status: creating xmlsec1Conf.sh [ 83s] config.status: creating xmlsec1-config [ 83s] config.status: creating config.h [ 83s] config.status: executing depfiles commands [ 85s] config.status: executing libtool commands [ 85s] configure: WARNING: unrecognized options: --enable-dynamic [ 85s] + /bin/make -j4 CFLAGS=-fPIE LDFLAGS=-pie [ 85s] /bin/make all-recursive [ 85s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 85s] Making all in include [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 85s] Making all in xmlsec [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 85s] Making all in private [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 85s] make[4]: Nothing to be done for 'all'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 85s] Making all in openssl [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 85s] make[4]: Nothing to be done for 'all'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 85s] Making all in gcrypt [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 85s] make[4]: Nothing to be done for 'all'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 85s] make[4]: Nothing to be done for 'all-am'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 85s] make[3]: Nothing to be done for 'all-am'. [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 85s] Making all in src [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 85s] Making all in . [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 85s] CC app.lo [ 85s] CC base64.lo [ 85s] CC bn.lo [ 85s] CC buffer.lo [ 85s] CC c14n.lo [ 85s] CC dl.lo [ 85s] CC enveloped.lo [ 85s] CC errors.lo [ 85s] CC io.lo [ 85s] CC keyinfo.lo [ 85s] CC keys.lo [ 85s] CC keysdata.lo [ 85s] CC keysmngr.lo [ 85s] CC kw_aes_des.lo [ 85s] CC list.lo [ 85s] CC membuf.lo [ 85s] CC nodeset.lo [ 85s] CC parser.lo [ 85s] CC relationship.lo [ 85s] CC soap.lo [ 85s] CC strings.lo [ 86s] CC templates.lo [ 86s] CC transforms.lo [ 86s] CC x509.lo [ 86s] CC xmldsig.lo [ 86s] CC xmlenc.lo [ 86s] CC xmlsec.lo [ 86s] CC xmltree.lo [ 86s] CC xpath.lo [ 86s] CC xslt.lo [ 86s] CCLD libxmlsec1.la [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 87s] Making all in openssl [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 87s] CC libxmlsec1_openssl_la-app.lo [ 87s] CC libxmlsec1_openssl_la-bn.lo [ 87s] CC libxmlsec1_openssl_la-ciphers.lo [ 87s] CC libxmlsec1_openssl_la-crypto.lo [ 87s] CC libxmlsec1_openssl_la-digests.lo [ 87s] CC libxmlsec1_openssl_la-evp.lo [ 87s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 87s] CC libxmlsec1_openssl_la-hmac.lo [ 87s] CC libxmlsec1_openssl_la-kw_aes.lo [ 87s] CC libxmlsec1_openssl_la-kw_des.lo [ 87s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 87s] CC libxmlsec1_openssl_la-signatures.lo [ 88s] CC libxmlsec1_openssl_la-symkeys.lo [ 88s] CC libxmlsec1_openssl_la-x509.lo [ 88s] CC libxmlsec1_openssl_la-x509vfy.lo [ 88s] CCLD libxmlsec1-openssl.la [ 88s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 88s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 88s] Making all in gcrypt [ 88s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 88s] CC libxmlsec1_gcrypt_la-app.lo [ 88s] CC libxmlsec1_gcrypt_la-asn1.lo [ 88s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 88s] CC libxmlsec1_gcrypt_la-crypto.lo [ 88s] CC libxmlsec1_gcrypt_la-digests.lo [ 88s] CC libxmlsec1_gcrypt_la-hmac.lo [ 88s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 89s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 89s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 89s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 89s] CC libxmlsec1_gcrypt_la-signatures.lo [ 89s] CCLD libxmlsec1-gcrypt.la [ 89s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 89s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 89s] Making all in apps [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 89s] CC xmlsec.o [ 89s] CC crypto.o [ 89s] CC cmdline.o [ 89s] CCLD xmlsec1 [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 90s] Making all in man [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 90s] make[2]: Nothing to be done for 'all'. [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 90s] Making all in docs [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] Copying docs... [ 90s] Making all in api [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 90s] Copying api-docs... [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] make[3]: Nothing to be done for 'all-am'. [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 90s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 90s] + exit 0 [ 90s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.K137oq [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd xmlsec1-1.2.22 [ 90s] + LANG=C [ 90s] + export LANG [ 90s] + unset DISPLAY [ 90s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm [ 90s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm [ 90s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm install [ 90s] Making install in include [ 90s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 90s] Making install in xmlsec [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] Making install in private [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 90s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 90s] /bin/make install-exec-hook [ 90s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/private [ 90s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/private' [ 90s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/private' [ 90s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 90s] Making install in openssl [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 90s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 90s] /bin/make install-exec-hook [ 90s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/openssl [ 90s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/openssl' [ 90s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/openssl' [ 90s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 90s] Making install in gcrypt [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 90s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 90s] /bin/make install-exec-hook [ 90s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/gcrypt [ 90s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 90s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 90s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] /bin/make install-exec-hook [ 90s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec [ 90s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec' [ 90s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h soap.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/include/xmlsec1/xmlsec' [ 90s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 90s] make[3]: Nothing to be done for 'install-exec-am'. [ 90s] make[3]: Nothing to be done for 'install-data-am'. [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 90s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 90s] Making install in src [ 90s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 90s] Making install in . [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 90s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.22 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1.so.1.2.22 [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so.1; }; }) [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so; }; }) [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1.la [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1.a [ 90s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1.a [ 90s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1.a [ 90s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 90s] make[3]: Nothing to be done for 'install-data-am'. [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 90s] Making install in openssl [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 90s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 90s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fPIE -version-info 3:22:2 -pie -o libxmlsec1-openssl.la -rpath /usr/lib libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -lssl -lcrypto -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm) [ 90s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-openssl.so.1.2.22 [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1; }; }) [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so; }; }) [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-openssl.la [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-openssl.a [ 90s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-openssl.a [ 90s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-openssl.a [ 90s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 90s] make[3]: Nothing to be done for 'install-data-am'. [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 90s] Making install in gcrypt [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 90s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 90s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fPIE -version-info 3:22:2 -pie -o libxmlsec1-gcrypt.la -rpath /usr/lib libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -lgcrypt -lgpg-error -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm) [ 90s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.22 [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1; }; }) [ 90s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so; }; }) [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-gcrypt.la [ 90s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 90s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 90s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 90s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 90s] make[3]: Nothing to be done for 'install-data-am'. [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 90s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 90s] Making install in apps [ 90s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/bin' [ 90s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/bin' [ 90s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib' [ 90s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/libxmlsec1.la' has not been installed in `/usr/lib' [ 90s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib' [ 90s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/bin/xmlsec1 [ 90s] make[2]: Nothing to be done for 'install-data-am'. [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 90s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 90s] Making install in man [ 90s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 90s] make[2]: Nothing to be done for 'install-exec-am'. [ 90s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/man/man1' [ 90s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/man/man1' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 90s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 90s] Making install in docs [ 90s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] Making install in api [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 90s] make[3]: Nothing to be done for 'install-exec-am'. [ 90s] make[3]: Nothing to be done for 'install-data-am'. [ 90s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 90s] make[3]: Nothing to be done for 'install-exec-am'. [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1 [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1/images [ 90s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1/api [ 91s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1/api/images [ 91s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1 [ 91s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1 [ 91s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1/images [ 91s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1/api [ 91s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 91s] Makefile:794: recipe for target 'install-data-local' failed [ 91s] make[3]: [install-data-local] Error 1 (ignored) [ 91s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1/api/images [ 91s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 91s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 91s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 91s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 91s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 91s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/bin' [ 91s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/bin' [ 91s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 91s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib' [ 91s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/aclocal' [ 91s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/aclocal' [ 91s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig' [ 91s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig' [ 91s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 91s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 91s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/info/dir [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm -regex '.*\.la$' [ 91s] + xargs rm -f -- [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/info [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/packages [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1 [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc/xmlsec1-1.2.22 [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/gtk-doc [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/doc [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/man [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm -regex '.*/man/man./.*.[0-9]' [ 91s] + xargs rm -f -- [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm -regex '.*/man/../man./.*.[0-9]' [ 91s] + xargs rm -f -- [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 91s] + xargs rm -f -- [ 91s] + _target= [ 91s] + _symlinks=0 [ 91s] + _files=() [ 91s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm [ 91s] + read _file [ 91s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 91s] + _files+=($_file) [ 91s] + read _file [ 91s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 91s] + _files+=($_file) [ 91s] + read _file [ 91s] + test -z [ 91s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 91s] ++ for i in '${_files[*]}' [ 91s] ++ sort [ 91s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 91s] ++ for i in '${_files[*]}' [ 91s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 91s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 91s] ++ seq 1 1 [ 91s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 91s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 91s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 91s] + test 0 = 1 [ 91s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 91s] + _files=() [ 91s] + read _file [ 91s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22 [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/bin/xmlsec1 [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.22 [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1-openssl.so.1.2.22 [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/lib/libxmlsec1.so.1.2.22 [ 92s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 92s] 0 blocks [ 92s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/xmlsec1-debuginfo.manifest [ 92s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/xmlsec1-debugsource.manifest [ 92s] + /usr/lib/rpm/check-buildroot [ 92s] + /usr/lib/rpm//brp-compress [ 92s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 92s] + /usr/lib/rpm/brp-python-hardlink [ 92s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm [ 92s] Processing files: xmlsec1-1.2.22-2.2.armv7l [ 92s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 92s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 92s] [ 92s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.wJIdZ7 [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd xmlsec1-1.2.22 [ 92s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1 [ 92s] + export LICENSEDIR [ 92s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1 [ 92s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1 [ 92s] + exit 0 [ 93s] Provides: libxmlsec1.so.1 xmlsec1 = 1.2.22-2.2 xmlsec1(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires(post): /sbin/ldconfig [ 93s] Requires(postun): /sbin/ldconfig [ 93s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcrypto.so.1.0.0 libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblzma.so.5 libm.so.6 libssl.so.1.0.0 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.2) libxmlsec1-openssl.so.1 libxmlsec1.so.1 libxslt.so.1 libxslt.so.1(LIBXML2_1.0.11) libxslt.so.1(LIBXML2_1.0.22) libz.so.1 [ 93s] Processing files: xmlsec1-debugsource-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Provides: xmlsec1-debugsource = 1.2.22-2.2 xmlsec1-debugsource(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 93s] Processing files: xmlsec1-gcrypt-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.YCpQGP [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd xmlsec1-1.2.22 [ 93s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 93s] + export LICENSEDIR [ 93s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 93s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 93s] + exit 0 [ 93s] Provides: libxmlsec1-gcrypt.so.1 xmlsec1-gcrypt = 1.2.22-2.2 xmlsec1-gcrypt(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires(post): /sbin/ldconfig [ 93s] Requires(postun): /sbin/ldconfig [ 93s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libgpg-error.so.0 liblzma.so.5 libm.so.6 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxmlsec1.so.1 libxslt.so.1 libz.so.1 [ 93s] Processing files: xmlsec1-openssl-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.YsKOux [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd xmlsec1-1.2.22 [ 93s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-openssl [ 93s] + export LICENSEDIR [ 93s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-openssl [ 93s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-openssl [ 93s] + exit 0 [ 93s] Provides: libxmlsec1-openssl.so.1 xmlsec1-openssl = 1.2.22-2.2 xmlsec1-openssl(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires(post): /sbin/ldconfig [ 93s] Requires(postun): /sbin/ldconfig [ 93s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libdl.so.2 liblzma.so.5 libm.so.6 libssl.so.1.0.0 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxmlsec1.so.1 libxslt.so.1 libz.so.1 [ 93s] Processing files: xmlsec1-devel-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.xYKmpf [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd xmlsec1-1.2.22 [ 93s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-devel [ 93s] + export LICENSEDIR [ 93s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-devel [ 93s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-devel [ 93s] + exit 0 [ 93s] Provides: pkgconfig(xmlsec1) = 1.2.22 pkgconfig(xmlsec1-gcrypt) = 1.2.22 pkgconfig(xmlsec1-openssl) = 1.2.22 xmlsec1-devel = 1.2.22-2.2 xmlsec1-devel(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1 libxmlsec1-openssl.so.1 libxmlsec1.so.1 pkgconfig(libxml-2.0) >= 2.7.4 pkgconfig(libxslt) >= 1.0.20 [ 93s] Processing files: xmlsec1-devel-static-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ajOWaZ [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd xmlsec1-1.2.22 [ 93s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-devel-static [ 93s] + export LICENSEDIR [ 93s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-devel-static [ 93s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm/usr/share/licenses/xmlsec1-devel-static [ 93s] + exit 0 [ 93s] Provides: xmlsec1-devel-static = 1.2.22-2.2 xmlsec1-devel-static(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Processing files: xmlsec1-debuginfo-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] warning: File listed twice: /usr/lib/debug/.build-id [ 93s] Provides: xmlsec1-debuginfo = 1.2.22-2.2 xmlsec1-debuginfo(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.22-2.2 xmlsec1-gcrypt-debuginfo(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Processing files: xmlsec1-openssl-debuginfo-1.2.22-2.2.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 93s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Provides: xmlsec1-openssl-debuginfo = 1.2.22-2.2 xmlsec1-openssl-debuginfo(armv7l-32) = 1.2.22-2.2 [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm [ 93s] warning: Could not canonicalize hostname: obsnw08 [ 93s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-2.2.src.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.22-2.2.armv7l.rpm [ 94s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.22-2.2.armv7l.rpm [ 94s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Ybboqt [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd xmlsec1-1.2.22 [ 94s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-2.2.arm [ 94s] + exit 0 [ 94s] ... checking for files with abuild user/group [ 94s] ... creating baselibs [ 95s] ... comparing built packages with the former built [ 95s] /usr/lib/build/pkg-diff.sh [ 95s] compare /.build.oldpackages/xmlsec1-1.2.22-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-2.2.src.rpm [ 95s] This is not a prerelease project. Compare the project name. [ 95s] comparing rpmtags [ 95s] comparing RELEASE [ 95s] comparing PROVIDES [ 95s] comparing scripts [ 95s] comparing filelist [ 95s] comparing file checksum [ 95s] RPM meta information is identical [ 95s] compare /.build.oldpackages/xmlsec1-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.22-2.2.armv7l.rpm [ 95s] Comparing xmlsec1-1.2.22-2.1.armv7l.rpm to xmlsec1-1.2.22-2.2.armv7l.rpm [ 96s] This is not a prerelease project. Compare the project name. [ 96s] comparing rpmtags [ 96s] comparing RELEASE [ 96s] comparing PROVIDES [ 96s] comparing scripts [ 96s] comparing filelist [ 96s] comparing file checksum [ 96s] creating rename script [ 96s] RPM file checksum differs. [ 96s] Extracting packages [ 96s] /usr/bin/xmlsec1 differs in assembler output [ 96s] --- /tmp/tmp.ZBzwp87398/tmp.QjbzK87966 2018-01-19 15:02:23.401416258 +0000 [ 96s] +++ /tmp/tmp.ZBzwp87398/tmp.uDBof88019 2018-01-19 15:02:23.453415192 +0000 [ 96s] @@ -4913,7 +4913,7 @@ [ 96s] mov r2, # [ 96s] str r2, [r3] [ 96s] bl [ 96s] - movw r0, # ; 0x51a8 [ 96s] + movw r0, # ; 0x51ab [ 96s] bl [ 96s] bl <__xmlTreeIndentString@plt> [ 96s] mov r3, r0 [ 96s] /usr/bin/xmlsec1 differs in ELF section .dynsym [ 96s] --- /tmp/tmp.ZBzwp87398/tmp.QjbzK87966 2018-01-19 15:02:23.489414453 +0000 [ 96s] +++ /tmp/tmp.ZBzwp87398/tmp.uDBof88019 2018-01-19 15:02:23.489414453 +0000 [ 96s] @@ -12,7 +12,7 @@ [ 96s] 0664 5b0a0000 00000000 00000000 12000000 [............... [ 96s] 0674 460b0000 e0b40000 04000000 12000d00 F............... [ 96s] 0684 26030000 00000000 00000000 12000000 &............... [ 96s] - 0694 10080000 00000000 00000000 12000000 ................ [ 96s] + 0694 26080000 00000000 00000000 12000000 &............... [ 96s] 06a4 1b090000 00000000 00000000 12000000 ................ [ 96s] 06b4 45030000 00000000 00000000 12000000 E............... [ 96s] 06c4 5c030000 00000000 00000000 12000000 \............... [ 96s] @@ -51,7 +51,7 @@ [ 96s] 08d4 3d0a0000 00000000 00000000 12000000 =............... [ 96s] 08e4 cc080000 00000000 00000000 12000000 ................ [ 96s] 08f4 74040000 00000000 00000000 12000000 t............... [ 96s] - 0904 df070000 00000000 00000000 12000000 ................ [ 96s] + 0904 fb070000 00000000 00000000 12000000 ................ [ 96s] 0914 94040000 00000000 00000000 12000000 ................ [ 96s] 0924 610a0000 00000000 00000000 12000000 a............... [ 96s] 0934 a9040000 00000000 00000000 12000000 ................ [ 96s] @@ -99,14 +99,14 @@ [ 96s] 0bd4 ad0a0000 00000000 00000000 12000000 ................ [ 96s] 0be4 ad090000 00000000 00000000 11000000 ................ [ 96s] 0bf4 52060000 00000000 00000000 12000000 R............... [ 96s] - 0c04 f4070000 00000000 00000000 12000000 ................ [ 96s] - 0c14 cc070000 00000000 00000000 12000000 ................ [ 96s] + 0c04 df070000 00000000 00000000 12000000 ................ [ 96s] + 0c14 3b080000 00000000 00000000 12000000 ;............... [ 96s] 0c24 68060000 00000000 00000000 12000000 h............... [ 96s] 0c34 de010000 00000000 00000000 12000000 ................ [ 96s] 0c44 85060000 00000000 00000000 12000000 ................ [ 96s] 0c54 a60a0000 00000000 00000000 12000000 ................ [ 96s] 0c64 46090000 00000000 00000000 12000000 F............... [ 96s] - 0c74 25080000 00000000 00000000 12000000 %............... [ 96s] + 0c74 cc070000 00000000 00000000 12000000 ................ [ 96s] 0c84 f0010000 00000000 00000000 12000000 ................ [ 96s] 0c94 130b0000 78f90100 00000000 10001800 ....x........... [ 96s] 0ca4 b90a0000 00000000 00000000 12000000 ................ [ 96s] @@ -139,7 +139,7 @@ [ 96s] 0e54 53020000 00000000 00000000 12000000 S............... [ 96s] 0e64 a1090000 00000000 00000000 12000000 ................ [ 96s] 0e74 6f020000 00000000 00000000 12000000 o............... [ 96s] - 0e84 38080000 00000000 00000000 12000000 8............... [ 96s] + 0e84 10080000 00000000 00000000 12000000 ................ [ 96s] 0e94 88020000 00000000 00000000 12000000 ................ [ 96s] 0ea4 c4090000 00000000 00000000 11000000 ................ [ 96s] 0eb4 0c0b0000 78f90100 00000000 10001700 ....x........... [ 96s] /usr/bin/xmlsec1 differs in ELF section .dynstr [ 96s] --- /tmp/tmp.ZBzwp87398/tmp.QjbzK87966 2018-01-19 15:02:23.493414371 +0000 [ 96s] +++ /tmp/tmp.ZBzwp87398/tmp.uDBof88019 2018-01-19 15:02:23.497414289 +0000 [ 96s] @@ -127,14 +127,14 @@ [ 96s] 16e4 4f626a65 63740078 6d6c5365 63445369 Object.xmlSecDSi [ 96s] 16f4 67437478 496e6974 69616c69 7a65006c gCtxInitialize.l [ 96s] 1704 69627873 6c742e73 6f2e3100 78736c74 ibxslt.so.1.xslt [ 96s] - 1714 53656375 72697479 466f7262 69640078 SecurityForbid.x [ 96s] - 1724 736c7453 65745365 63757269 74795072 sltSetSecurityPr [ 96s] - 1734 65667300 78736c74 53657444 65666175 efs.xsltSetDefau [ 96s] - 1744 6c745365 63757269 74795072 65667300 ltSecurityPrefs. [ 96s] - 1754 78736c74 4e657753 65637572 69747950 xsltNewSecurityP [ 96s] - 1764 72656673 0078736c 74436c65 616e7570 refs.xsltCleanup [ 96s] - 1774 476c6f62 616c7300 78736c74 46726565 Globals.xsltFree [ 96s] - 1784 53656375 72697479 50726566 73006c69 SecurityPrefs.li [ 96s] + 1714 436c6561 6e757047 6c6f6261 6c730078 CleanupGlobals.x [ 96s] + 1724 736c7453 65744465 6661756c 74536563 sltSetDefaultSec [ 96s] + 1734 75726974 79507265 66730078 736c7453 urityPrefs.xsltS [ 96s] + 1744 65745365 63757269 74795072 65667300 etSecurityPrefs. [ 96s] + 1754 78736c74 46726565 53656375 72697479 xsltFreeSecurity [ 96s] + 1764 50726566 73007873 6c744e65 77536563 Prefs.xsltNewSec [ 96s] + 1774 75726974 79507265 66730078 736c7453 urityPrefs.xsltS [ 96s] + 1784 65637572 69747946 6f726269 64006c69 ecurityForbid.li [ 96s] 1794 62786d6c 322e736f 2e320078 6d6c5374 bxml2.so.2.xmlSt [ 96s] 17a4 72457175 616c0078 6d6c4164 64494400 rEqual.xmlAddID. [ 96s] 17b4 786d6c56 616c6964 61746544 74640078 xmlValidateDtd.x [ 96s] /usr/bin/xmlsec1 differs in ELF section .text [ 96s] --- /tmp/tmp.ZBzwp87398/tmp.QjbzK87966 2018-01-19 15:02:23.541413386 +0000 [ 96s] +++ /tmp/tmp.ZBzwp87398/tmp.uDBof88019 2018-01-19 15:02:23.545413305 +0000 [ 96s] @@ -1073,7 +1073,7 @@ [ 96s] 6e84 04408fe0 fc319fe5 03308fe0 003093e5 .@...1...0...0.. [ 96s] 6e94 000053e3 0100000a 0030a0e3 760000ea ..S......0..v... [ 96s] 6ea4 e4319fe5 03308fe0 0120a0e3 002083e5 .1...0... ... .. [ 96s] - 6eb4 0aeeffeb a80105e3 41eeffeb fbedffeb ........A....... [ 96s] + 6eb4 0aeeffeb ab0105e3 41eeffeb fbedffeb ........A....... [ 96s] 6ec4 0030a0e1 c4219fe5 02208fe0 002083e5 .0...!... ... .. [ 96s] 6ed4 e4edffeb 0020a0e1 0130a0e3 003082e5 ..... ...0...0.. [ 96s] 6ee4 ddedffeb 0020a0e1 a4319fe5 03308fe0 ..... ...1...0.. [ 96s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.22-2.2.armv7l.rpm [ 96s] skipping -debuginfo package [ 96s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.22-2.2.armv7l.rpm [ 96s] Comparing xmlsec1-debugsource-1.2.22-2.1.armv7l.rpm to xmlsec1-debugsource-1.2.22-2.2.armv7l.rpm [ 96s] This is not a prerelease project. Compare the project name. [ 96s] comparing rpmtags [ 96s] comparing RELEASE [ 96s] comparing PROVIDES [ 96s] comparing scripts [ 96s] comparing filelist [ 96s] comparing file checksum [ 96s] creating rename script [ 97s] RPM meta information is identical [ 97s] compare /.build.oldpackages/xmlsec1-devel-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.22-2.2.armv7l.rpm [ 97s] Comparing xmlsec1-devel-1.2.22-2.1.armv7l.rpm to xmlsec1-devel-1.2.22-2.2.armv7l.rpm [ 97s] This is not a prerelease project. Compare the project name. [ 97s] comparing rpmtags [ 97s] comparing RELEASE [ 97s] comparing PROVIDES [ 97s] comparing scripts [ 97s] comparing filelist [ 97s] comparing file checksum [ 97s] creating rename script [ 97s] RPM file checksum differs. [ 97s] Extracting packages [ 97s] /usr/lib/xmlsec1Conf.sh differs (ASCII text) [ 97s] --- old//usr/lib/xmlsec1Conf.sh 2017-08-29 01:33:22.000000000 +0000 [ 97s] +++ new//usr/lib/xmlsec1Conf.sh 2018-01-19 15:02:18.000000000 +0000 [ 97s] @@ -8,6 +8,6 @@ [ 97s] [ 97s] XMLSEC_LIBDIR="/usr/lib" [ 97s] XMLSEC_INCLUDEDIR=" -D__XMLSEC_FUNCTION__=__func__ -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_GOST2012=1 -DXMLSEC_NO_CRYPTO_DYNAMIC_LOADING=1 -I/usr/include/xmlsec1 -I/usr/include/libxml2 -I/usr/include/libxml2 -DXMLSEC_OPENSSL_100=1 -DXMLSEC_CRYPTO_OPENSSL=1" [ 97s] -XMLSEC_LIBS="-L/usr/lib -lxmlsec1-openssl -lxmlsec1 -lxml2 -lxslt -lxml2 -lz -llzma -lm -ldl -lm -lxml2 -lssl -lcrypto " [ 97s] +XMLSEC_LIBS="-L/usr/lib -lxmlsec1-openssl -lxmlsec1 -lxml2 -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lssl -lcrypto " [ 97s] MODULE_VERSION="xmlsec-1.2.22-openssl" [ 97s] [ 97s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.22-2.2.armv7l.rpm [ 97s] Comparing xmlsec1-devel-static-1.2.22-2.1.armv7l.rpm to xmlsec1-devel-static-1.2.22-2.2.armv7l.rpm [ 97s] This is not a prerelease project. Compare the project name. [ 97s] comparing rpmtags [ 97s] comparing RELEASE [ 97s] comparing PROVIDES [ 97s] comparing scripts [ 97s] comparing filelist [ 97s] comparing file checksum [ 97s] creating rename script [ 97s] RPM file checksum differs. [ 97s] Extracting packages [ 98s] /usr/lib/libxmlsec1_gcrypt_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-asn1.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-asymkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib/libxmlsec1_gcrypt_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-evp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-evp_signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib/libxmlsec1_openssl_la-kt_rsa.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/libxmlsec1_openssl_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/libxmlsec1_openssl_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/libxmlsec1_openssl_la-x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/libxmlsec1_openssl_la-x509vfy.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/base64.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/buffer.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/c14n.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/dl.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/enveloped.o: only difference was in build-id or gnu_debuglink, GOOD. [ 100s] /usr/lib/errors.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/io.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/keyinfo.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/keys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/keysdata.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/keysmngr.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/kw_aes_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/list.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/membuf.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/nodeset.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/parser.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/relationship.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/soap.o: only difference was in build-id or gnu_debuglink, GOOD. [ 101s] /usr/lib/strings.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/templates.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/transforms.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/xmldsig.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/xmlenc.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/xmlsec.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/xmltree.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/xpath.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] /usr/lib/xslt.o: only difference was in build-id or gnu_debuglink, GOOD. [ 102s] Package content is identical [ 102s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.22-2.2.armv7l.rpm [ 103s] Comparing xmlsec1-gcrypt-1.2.22-2.1.armv7l.rpm to xmlsec1-gcrypt-1.2.22-2.2.armv7l.rpm [ 103s] This is not a prerelease project. Compare the project name. [ 103s] comparing rpmtags [ 103s] comparing RELEASE [ 103s] comparing PROVIDES [ 103s] comparing scripts [ 103s] comparing filelist [ 103s] comparing file checksum [ 103s] creating rename script [ 103s] RPM file checksum differs. [ 103s] Extracting packages [ 103s] /usr/lib/libxmlsec1-gcrypt.so.1.2.22: only difference was in build-id or gnu_debuglink, GOOD. [ 103s] Package content is identical [ 103s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.22-2.2.armv7l.rpm [ 103s] skipping -debuginfo package [ 103s] compare /.build.oldpackages/xmlsec1-openssl-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.22-2.2.armv7l.rpm [ 104s] Comparing xmlsec1-openssl-1.2.22-2.1.armv7l.rpm to xmlsec1-openssl-1.2.22-2.2.armv7l.rpm [ 104s] This is not a prerelease project. Compare the project name. [ 104s] comparing rpmtags [ 104s] comparing RELEASE [ 104s] comparing PROVIDES [ 104s] comparing scripts [ 104s] comparing filelist [ 104s] comparing file checksum [ 104s] creating rename script [ 104s] RPM file checksum differs. [ 104s] Extracting packages [ 105s] /usr/lib/libxmlsec1-openssl.so.1.2.22: only difference was in build-id or gnu_debuglink, GOOD. [ 105s] Package content is identical [ 105s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.22-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.22-2.2.armv7l.rpm [ 105s] skipping -debuginfo package [ 105s] [ 105s] obsnw08 finished "build xmlsec1.spec" at Fri Jan 19 15:02:32 UTC 2018. [ 105s] Retried build at Thu Jan 25 14:51:13 2018 returned same result, skipped Retried build at Fri Feb 2 15:05:37 2018 returned same result, skipped Retried build at Fri Feb 16 17:41:52 2018 returned same result, skipped Retried build at Fri Mar 9 23:06:00 2018 returned same result, skipped Retried build at Fri Mar 30 17:43:39 2018 returned same result, skipped Retried build at Fri Mar 30 19:06:34 2018 returned same result, skipped Retried build at Fri Apr 6 19:49:45 2018 returned same result, skipped Retried build at Fri Apr 13 17:51:18 2018 returned same result, skipped Retried build at Fri May 11 20:45:03 2018 returned same result, skipped Retried build at Fri May 11 22:44:25 2018 returned same result, skipped Retried build at Fri Jun 15 18:31:50 2018 returned same result, skipped Retried build at Fri Jun 22 17:52:37 2018 returned same result, skipped Retried build at Fri Jul 6 17:24:48 2018 returned same result, skipped Retried build at Fri Jul 13 20:14:14 2018 returned same result, skipped Retried build at Fri Aug 17 09:35:37 2018 returned same result, skipped Retried build at Wed Aug 22 08:38:06 2018 returned same result, skipped Retried build at Fri Aug 24 18:30:49 2018 returned same result, skipped Retried build at Tue Jan 8 01:28:36 2019 returned same result, skipped Retried build at Fri Jan 11 01:52:57 2019 returned same result, skipped Retried build at Fri Jan 18 13:24:08 2019 returned same result, skipped Retried build at Wed Apr 17 11:49:45 2019 returned same result, skipped Retried build at Thu Apr 18 09:45:04 2019 returned same result, skipped Retried build at Mon Apr 29 09:31:21 2019 returned same result, skipped Retried build at Tue May 7 02:38:44 2019 returned same result, skipped Retried build at Fri May 17 00:32:17 2019 returned same result, skipped Retried build at Fri Jun 28 09:44:19 2019 returned same result, skipped Retried build at Tue Jul 16 22:50:20 2019 returned same result, skipped Retried build at Fri Sep 20 00:56:40 2019 returned same result, skipped Retried build at Fri Oct 11 01:53:21 2019 returned same result, skipped Retried build at Thu Oct 17 09:25:25 2019 returned same result, skipped