[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw02 started "build _service:gbs:attr.spec" at Thu Sep 15 03:56:37 UTC 2022. [ 0s] [ 0s] Building attr for project 'Tizen:Base:Tool' repository 'standard' arch 'armv7l' srcmd5 '5a18e83d2fa6ce3d4cdf6223ff99313a' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:attr.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:attr.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:attr.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 11s] [36/41] preinstalling tar... [ 11s] [37/41] preinstalling util-linux... [ 11s] [38/41] preinstalling util-linux-su... [ 11s] [39/41] preinstalling nss... [ 11s] [40/41] preinstalling libsoftokn3... [ 11s] [41/41] preinstalling rpm... [ 11s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-armv7l postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/96] installing libmagic-data-5.41-6.349 [ 12s] [2/96] installing setup-0.9-6.20 [ 12s] warning: /etc/profile created as /etc/profile.rpmnew [ 12s] [3/96] installing filesystem-3.1-4.1 [ 12s] [4/96] installing glibc-2.30-17.5 [ 12s] [5/96] installing libatomic-9.2.0-17.4 [ 12s] [6/96] installing libgcc-9.2.0-17.4 [ 13s] [7/96] installing bash-3.2.57-5.1 [ 13s] [8/96] installing cpio-2.8-5.3 [ 13s] [9/96] installing diffutils-3.3-4.3 [ 13s] [10/96] installing findutils-4.3.8-5.418 [ 13s] [11/96] installing gdbm-1.8.3-3.722 [ 13s] [12/96] installing hostname-3.23-3.3 [ 13s] [13/96] installing libattr-2.5.1-5.409 [ 14s] [14/96] installing libblkid-2.37.4-12.21 [ 14s] [15/96] installing libbz2-1.0.8-5.282 [ 14s] [16/96] installing libcap-2.24-4.404 [ 14s] [17/96] installing libext2fs-1.46.0-4.59 [ 15s] [18/96] installing libfreebl3-3.34.1-4.20 [ 15s] [19/96] installing libgfortran-9.2.0-17.4 [ 15s] [20/96] installing libgomp-9.2.0-17.4 [ 16s] [21/96] installing libitm-9.2.0-17.4 [ 16s] [22/96] installing libltdl-2.4.6-4.87 [ 16s] [23/96] installing liblua-5.1.5-3.359 [ 17s] [24/96] installing liblzma-5.2.5-5.339 [ 17s] [25/96] installing libopenssl11-1.1.1q-7.19 [ 17s] [26/96] installing libpcre-8.45-5.20 [ 18s] [27/96] installing libpopt-1.16-3.666 [ 18s] [28/96] installing libsmack-1.3.1-4.393 [ 18s] [29/96] installing libsmartcols-2.37.4-12.21 [ 19s] [30/96] installing libsqlite-3.39.0-6.8 [ 19s] [31/96] installing libstdc++-9.2.0-17.4 [ 19s] [32/96] installing libuuid-2.37.4-12.21 [ 20s] [33/96] installing libzstd1-1.4.5-2.242 [ 20s] [34/96] installing m4-1.4.19-4.2 [ 20s] [35/96] installing net-tools-2.0_20121208git-4.4 [ 20s] [36/96] installing nspr-4.12-3.659 [ 20s] [37/96] installing patch-2.7.6-10.38 [ 20s] [38/96] installing pkg-config-0.29.2-4.78 [ 20s] [39/96] installing sed-4.1c-4.2 [ 20s] [40/96] installing update-alternatives-1.20.5-3.4 [ 21s] [41/96] installing which-2.17-4.4 [ 21s] [42/96] installing zlib-1.2.11-3.700 [ 21s] [43/96] installing build-compare-2015.04.28-3.254 [ 21s] [44/96] installing libstdc++-devel-9.2.0-17.4 [ 22s] [45/96] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 26s] [46/96] installing terminfo-base-full-6.2-7.325 [ 26s] [47/96] installing cpp-9.2.0-17.4 [ 27s] [48/96] installing gcc-c++-9.2.0-17.4 [ 28s] [49/96] installing binutils-2.33.1-10.32 [ 29s] [50/96] installing coreutils-6.9-5.151 [ 29s] [51/96] installing gawk-3.1.5-4.4 [ 29s] [52/96] installing grep-2.5.2-3.4 [ 29s] [53/96] installing libacl-2.2.53-4.622 [ 29s] [54/96] installing libcc1-9.2.0-17.4 [ 30s] [55/96] installing libelf-0.178-5.18 [ 30s] [56/96] installing libmount-2.37.4-12.21 [ 30s] [57/96] installing libubsan-9.2.0-17.4 [ 31s] [58/96] installing make-4.3-3.35 [ 31s] [59/96] installing nss-certs-3.34.1-4.20 [ 31s] [60/96] installing smack-1.3.1-4.393 [ 31s] [61/96] installing bzip2-1.0.8-5.282 [ 31s] [62/96] installing libfdisk-2.37.4-12.21 [ 31s] [63/96] installing libmagic-5.41-6.349 [ 32s] [64/96] installing libxml2-2.10.2-8.1 [ 32s] [65/96] installing perl-5.34.0-8.30 [ 37s] [66/96] installing xz-5.2.5-5.339 [ 38s] [67/96] installing build-mkbaselibs-20120927-3.3 [ 39s] [68/96] installing linux-glibc-devel-3.10-4.529 [ 45s] [69/96] installing autoconf-2.71-6.95 [ 46s] [70/96] installing file-5.41-6.349 [ 47s] [71/96] installing glibc-locale-2.30-17.5 [ 50s] [72/96] installing tar-1.17-3.4 [ 53s] [73/96] installing gzip-1.3.12-3.673 [ 54s] [74/96] installing libncurses6-6.2-7.325 [ 55s] [75/96] installing pam-1.1.6-4.2 [ 56s] [76/96] installing tzdata-2021e-5.1 [ 56s] [77/96] installing libdw-0.178-5.18 [ 57s] [78/96] installing libarchive-3.5.2-5.28 [ 57s] [79/96] installing gcc-9.2.0-17.4 [ 58s] [80/96] installing libncurses-6.2-7.325 [ 58s] [81/96] installing glibc-devel-2.30-17.5 [ 58s] [82/96] installing qemu-accel-x86_64-armv7l-0.4-10.16 [ 84s] [83/96] installing automake-1.16.4-6.83 [ 85s] [84/96] installing less-466-3.4 [ 85s] [85/96] installing libreadline-5.2-3.236 [ 85s] [86/96] installing procps-ng-3.3.17-4.1 [ 86s] [87/96] installing libasm-0.178-5.18 [ 86s] [88/96] installing build-20120927-3.3 [ 86s] [89/96] installing libtool-2.4.6-4.87 [ 86s] [90/96] installing elfutils-0.178-5.18 [ 86s] [91/96] installing util-linux-2.37.4-12.21 [ 86s] [92/96] installing util-linux-su-2.37.4-12.21 [ 86s] [93/96] installing nss-3.34.1-4.20 [ 87s] [94/96] installing libsoftokn3-3.34.1-4.20 [ 87s] [95/96] installing rpm-4.14.1.1-9.156 [ 88s] [96/96] installing rpm-build-4.14.1.1-9.156 [ 88s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 88s] now finalizing build dir... [ 88s] Running build time source services... [ 88s] build target is armv7l-tizen-linux [ 88s] ----------------------------------------------------------------- [ 88s] I have the following modifications for attr.spec: [ 88s] 7c7 [ 88s] < Release: 0 [ 88s] --- [ 88s] > Release: 5.410 [ 88s] ----------------------------------------------------------------- [ 88s] ----- building attr.spec (user abuild) [ 88s] ----------------------------------------------------------------- [ 88s] ----------------------------------------------------------------- [ 89s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base:Tool/standard/5a18e83d2fa6ce3d4cdf6223ff99313a-attr' -ba /home/abuild/rpmbuild/SOURCES/attr.spec [ 89s] Building target platforms: armv7l-tizen-linux [ 89s] Building for target armv7l-tizen-linux [ 89s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uXWkIp [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + rm -rf attr-2.5.1 [ 89s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/attr-2.5.1.src.tar.gz [ 89s] + /bin/tar -xof - [ 89s] + STATUS=0 [ 89s] + '[' 0 -ne 0 ']' [ 89s] + cd attr-2.5.1 [ 89s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 89s] + cp /home/abuild/rpmbuild/SOURCES/attr.manifest . [ 89s] + exit 0 [ 89s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.fdUPyq [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd attr-2.5.1 [ 89s] ++ uname -m [ 89s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 89s] + LANG=C [ 89s] + export LANG [ 89s] + unset DISPLAY [ 89s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + LDFLAGS= [ 89s] + export LDFLAGS [ 89s] + export 'OPTIMIZER=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 89s] + OPTIMIZER='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 89s] + export DEBUG=-DNDEBUG [ 89s] + DEBUG=-DNDEBUG [ 89s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 89s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 89s] + export 'LDFLAGS= -Wl,-z,relro -pie' [ 89s] + LDFLAGS=' -Wl,-z,relro -pie' [ 89s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-gettext=no --exec-prefix=/ --sbindir=/usr/sbin --libdir=/usr/lib --libexecdir=/usr/lib --with-pic --enable-static=no [ 89s] configure: WARNING: unrecognized options: --enable-gettext [ 89s] checking for a BSD-compatible install... /bin/install -c [ 89s] checking whether build environment is sane... yes [ 89s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 89s] checking for gawk... gawk [ 89s] checking whether make sets $(MAKE)... yes [ 89s] checking whether make supports nested variables... yes [ 89s] checking whether make supports nested variables... (cached) yes [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 89s] checking whether the C compiler works... yes [ 89s] checking for C compiler default output file name... a.out [ 89s] checking for suffix of executables... [ 89s] checking whether we are cross compiling... no [ 89s] checking for suffix of object files... o [ 89s] checking whether we are using the GNU C compiler... yes [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 89s] checking whether make supports the include directive... yes (GNU style) [ 89s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 89s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 89s] checking for grep that handles long lines and -e... /bin/grep [ 89s] checking for egrep... /bin/grep -E [ 90s] checking for ANSI C header files... yes [ 90s] checking for sys/types.h... yes [ 90s] checking for sys/stat.h... yes [ 90s] checking for stdlib.h... yes [ 90s] checking for string.h... yes [ 90s] checking for memory.h... yes [ 90s] checking for strings.h... yes [ 90s] checking for inttypes.h... yes [ 90s] checking for stdint.h... yes [ 90s] checking for unistd.h... yes [ 90s] checking minix/config.h usability... no [ 90s] checking minix/config.h presence... no [ 90s] checking for minix/config.h... no [ 90s] checking whether it is safe to define __EXTENSIONS__... yes [ 90s] checking for an ANSI C-conforming const... yes [ 90s] checking for mode_t... yes [ 90s] checking for size_t... yes [ 90s] checking for working alloca.h... yes [ 90s] checking for alloca... yes [ 90s] checking whether __attribute__((visibility())) is supported... yes [ 90s] checking for special C compiler options needed for large files... no [ 90s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 90s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 90s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 90s] checking for armv7l-tizen-linux-gnueabi-link... no [ 90s] checking for ar... ar [ 90s] checking the archiver (ar) interface... ar [ 90s] checking build system type... armv7l-tizen-linux-gnueabi [ 90s] checking host system type... armv7l-tizen-linux-gnueabi [ 90s] checking how to print strings... printf [ 90s] checking for a sed that does not truncate output... /bin/sed [ 90s] checking for fgrep... /bin/grep -F [ 90s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 90s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 90s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 90s] checking the name lister (/bin/nm -B) interface... BSD nm [ 90s] checking whether ln -s works... yes [ 90s] checking the maximum length of command line arguments... 1572864 [ 90s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 90s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 90s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 90s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 90s] checking for objdump... objdump [ 90s] checking how to recognize dependent libraries... pass_all [ 90s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 90s] checking for dlltool... no [ 90s] checking how to associate runtime and link libraries... printf %s\n [ 90s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 90s] checking for archiver @FILE support... @ [ 90s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 90s] checking for strip... strip [ 90s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 90s] checking for ranlib... ranlib [ 91s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 91s] checking for sysroot... no [ 91s] checking for a working dd... /bin/dd [ 91s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 91s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 91s] checking for mt... no [ 91s] checking if : is a manifest tool... no [ 91s] checking for dlfcn.h... yes [ 91s] checking for objdir... .libs [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 91s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 91s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 91s] checking whether -lc should be explicitly linked in... no [ 91s] checking dynamic linker characteristics... GNU/Linux ld.so [ 91s] checking how to hardcode library paths into programs... immediate [ 91s] checking whether stripping libraries is possible... yes [ 91s] checking if libtool supports shared libraries... yes [ 91s] checking whether to build shared libraries... yes [ 91s] checking whether to build static libraries... no [ 91s] checking whether NLS is requested... yes [ 91s] checking for msgfmt... no [ 91s] checking for gmsgfmt... : [ 91s] checking for xgettext... no [ 91s] checking for msgmerge... no [ 91s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 91s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 91s] checking for shared library run path origin... done [ 91s] checking for CFPreferencesCopyAppValue... no [ 91s] checking for CFLocaleCopyCurrent... no [ 91s] checking for GNU gettext in libc... yes [ 91s] checking whether to use NLS... yes [ 91s] checking where the gettext function comes from... libc [ 91s] checking that generated files are newer than configure... done [ 91s] configure: creating ./config.status [ 92s] config.status: creating libattr.pc [ 92s] config.status: creating Makefile [ 92s] config.status: creating po/Makefile.in [ 92s] config.status: creating include/config.h [ 92s] config.status: executing depfiles commands [ 92s] config.status: executing libtool commands [ 92s] config.status: executing po-directories commands [ 92s] config.status: creating po/POTFILES [ 92s] config.status: creating po/Makefile [ 92s] config.status: executing include/attr commands [ 92s] configure: WARNING: unrecognized options: --enable-gettext [ 92s] + /bin/make -j4 [ 92s] Making all in po [ 92s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 92s] make[1]: Nothing to be done for 'all'. [ 92s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 92s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 92s] CC tools/getfattr.o [ 92s] CC tools/setfattr.o [ 92s] CC tools/attr.o [ 92s] CC libattr/la-attr_copy_action.lo [ 92s] CC libattr/la-attr_copy_check.lo [ 93s] CC libattr/la-attr_copy_fd.lo [ 93s] CC libattr/la-attr_copy_file.lo [ 93s] CC libattr/la-libattr.lo [ 93s] CC libattr/la-syscalls.lo [ 93s] CC libmisc/high_water_alloc.lo [ 93s] CC libmisc/next_line.lo [ 93s] CC libmisc/quote.lo [ 93s] CC libmisc/unquote.lo [ 93s] CC libmisc/walk_tree.lo [ 93s] CCLD libattr.la [ 93s] CCLD libmisc.la [ 93s] CCLD attr [ 93s] CCLD getfattr [ 93s] CCLD setfattr [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 93s] + exit 0 [ 93s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.iIQ3io [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd attr-2.5.1 [ 93s] + LANG=C [ 93s] + export LANG [ 93s] + unset DISPLAY [ 93s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm [ 93s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm [ 93s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm install [ 93s] Making install in po [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 93s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/cs/LC_MESSAGES/attr.mo [ 93s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/de/LC_MESSAGES/attr.mo [ 94s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/es/LC_MESSAGES/attr.mo [ 94s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/fr/LC_MESSAGES/attr.mo [ 94s] installing gl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/gl/LC_MESSAGES/attr.mo [ 94s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/nl/LC_MESSAGES/attr.mo [ 94s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/pl/LC_MESSAGES/attr.mo [ 94s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/sv/LC_MESSAGES/attr.mo [ 94s] installing en@boldquot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/en@boldquot/LC_MESSAGES/attr.mo [ 94s] installing en@quot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/locale/en@quot/LC_MESSAGES/attr.mo [ 94s] if test "attr" = "gettext-tools"; then \ [ 94s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/gettext/po; \ [ 94s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 94s] /bin/install -c -m 644 ./$file \ [ 94s] /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/gettext/po/$file; \ [ 94s] done; \ [ 94s] for file in Makevars; do \ [ 94s] rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/gettext/po/$file; \ [ 94s] done; \ [ 94s] else \ [ 94s] : ; \ [ 94s] fi [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib' [ 94s] /bin/sh ./libtool --mode=install /bin/install -c libattr.la '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib' [ 94s] libtool: install: /bin/install -c .libs/libattr.so.1.1.2501 /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib/libattr.so.1.1.2501 [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib && { ln -s -f libattr.so.1.1.2501 libattr.so.1 || { rm -f libattr.so.1 && ln -s libattr.so.1.1.2501 libattr.so.1; }; }) [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib && { ln -s -f libattr.so.1.1.2501 libattr.so || { rm -f libattr.so && ln -s libattr.so.1.1.2501 libattr.so; }; }) [ 94s] libtool: install: /bin/install -c .libs/libattr.lai /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib/libattr.la [ 94s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin' [ 94s] /bin/sh ./libtool --mode=install /bin/install -c attr getfattr setfattr '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin' [ 94s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 94s] libtool: install: /bin/install -c .libs/attr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin/attr [ 94s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 94s] libtool: install: /bin/install -c .libs/getfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin/getfattr [ 94s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 94s] libtool: install: /bin/install -c .libs/setfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin/setfattr [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/etc' [ 94s] /bin/install -c -m 644 xattr.conf '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/etc' [ 94s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/attributes.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/include/attr" [ 94s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/error_context.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/include/attr" [ 94s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/libattr.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/include/attr" [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/doc/attr' [ 94s] /bin/install -c -m 644 doc/CHANGES doc/COPYING doc/COPYING.LGPL doc/PORTING '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/doc/attr' [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/man/man1' [ 94s] /bin/install -c -m 644 man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/man/man1' [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/man/man3' [ 94s] /bin/install -c -m 644 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3 '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/man/man3' [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib/pkgconfig' [ 94s] /bin/install -c -m 644 libattr.pc '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib/pkgconfig' [ 94s] /bin/make install-data-hook [ 94s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 94s] set -e; \ [ 94s] cd "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/man"; \ [ 94s] for d in man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3; do \ [ 94s] man_section=${d##*.}; \ [ 94s] d=${d#man/}; \ [ 94s] dst=${d##*/}; \ [ 94s] for m in `gawk \ [ 94s] '/^\.S[h|H] NAME/ {ok=1; next} ok {print; exit}' $d \ [ 94s] | /bin/sed \ [ 94s] -e 's/^\.Nm //' -e 's/,/ /g' -e 's/\\-.*//' \ [ 94s] -e 's/\\\f[0-9]//g' -e 's/ / /g;q'`; \ [ 94s] do \ [ 94s] [ "$m" = "\\" ] && continue; \ [ 94s] ln="man$man_section/$m.$man_section"; \ [ 94s] [ -e "$ln" ] && continue; \ [ 94s] echo ln -s $dst $ln; \ [ 94s] ln -s $dst $ln; \ [ 94s] done; \ [ 94s] done [ 94s] ln -s attr_get.3 man3/attr_getf.3 [ 94s] ln -s attr_list.3 man3/attr_listf.3 [ 94s] ln -s attr_multi.3 man3/attr_multif.3 [ 94s] ln -s attr_remove.3 man3/attr_removef.3 [ 94s] ln -s attr_set.3 man3/attr_setf.3 [ 94s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 94s] + rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/info/dir [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm -regex '.*\.la$' [ 94s] + xargs rm -f -- [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm -regex '.*\.a$' [ 95s] + xargs rm -f -- [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm -type f -name '*.la' -delete -print [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm//usr/share/doc/attr [ 95s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm attr [ 95s] find: `/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/help/': No such file or directory [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/info [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/doc/packages [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/doc/attr [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/doc/attr-2.5.1 [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/gtk-doc [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/doc [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/man [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm -regex '.*/man/man./.*.[0-9]' [ 95s] + xargs rm -f -- [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm -regex '.*/man/../man./.*.[0-9]' [ 95s] + xargs rm -f -- [ 95s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm -regex '.*/man/man./.*.[0-9]pm' [ 95s] + xargs rm -f -- [ 95s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 2.5.1-5.410 --unique-debug-src-base attr-2.5.1-5.410.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/attr-2.5.1 [ 95s] 1+0 records in [ 95s] 1+0 records out [ 95s] 1+0 records in [ 95s] 1+0 records out [ 95s] 1+0 records in [ 95s] 1+0 records out [ 95s] 1+0 records in [ 95s] 1+0 records out [ 95s] 7 bytes (7 B) copied7 bytes (7 B) copied7 bytes (7 B) copied7 bytes (7 B) copied, 0.000573264 s, 12.2 kB/s [ 95s] , 0.000613266 s, 11.4 kB/s [ 95s] , 0.0006068 s, 11.5 kB/s [ 95s] , 0.00059128 s, 11.8 kB/s [ 95s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin/setfattr [ 95s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/lib/libattr.so.1.1.2501 [ 95s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin/getfattr [ 95s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/bin/attr [ 95s] 0+0 records in [ 95s] 0+0 records out [ 95s] 0 bytes (0 B) copied0+0 records in [ 95s] 0+0 records out [ 95s] 0 bytes (0 B) copied, 0.000437324 s, 0.0 kB/s [ 95s] , 0.000425622 s, 0.0 kB/s [ 95s] 0+0 records in [ 95s] 0+0 records out [ 95s] 0 bytes (0 B) copied, 0.000423221 s, 0.0 kB/s [ 95s] 0+0 records in [ 95s] 0+0 records out [ 95s] 0 bytes (0 B) copied, 0.000424126 s, 0.0 kB/s [ 95s] 164 blocks [ 95s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.5.1/attr-debuginfo.manifest [ 95s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.5.1/attr-debugsource.manifest [ 95s] + /usr/lib/rpm/check-buildroot [ 96s] + /usr/lib/rpm//brp-compress [ 96s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 96s] + /usr/lib/rpm/brp-python-hardlink [ 96s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm [ 96s] Processing files: attr-2.5.1-5.410.armv7l [ 96s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 96s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 96s] [ 96s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.oet66n [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd attr-2.5.1 [ 96s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/attr [ 96s] + export LC_ALL=C [ 96s] + LC_ALL=C [ 96s] + export LICENSEDIR [ 96s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/attr [ 96s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/attr [ 96s] + exit 0 [ 96s] Provides: attr = 2.5.1-5.410 attr(armv7l-32) = 2.5.1-5.410 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.2) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 96s] Processing files: attr-debugsource-2.5.1-5.410.armv7l [ 96s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 96s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 96s] [ 96s] Provides: attr-debugsource = 2.5.1-5.410 attr-debugsource(armv7l-32) = 2.5.1-5.410 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Processing files: libattr-2.5.1-5.410.armv7l [ 96s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 96s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 96s] [ 96s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.14D3Ro [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd attr-2.5.1 [ 96s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/libattr [ 96s] + export LC_ALL=C [ 96s] + LC_ALL=C [ 96s] + export LICENSEDIR [ 96s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/libattr [ 96s] + cp -pr doc/COPYING.LGPL /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/libattr [ 96s] + exit 0 [ 96s] Provides: config(libattr) = 2.5.1-5.410 libattr = 2.5.1-5.410 libattr(armv7l-32) = 2.5.1-5.410 libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.1) libattr.so.1(ATTR_1.2) libattr.so.1(ATTR_1.3) [ 96s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires(post): /sbin/ldconfig [ 96s] Requires(postun): /sbin/ldconfig [ 96s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 96s] Processing files: libattr-devel-2.5.1-5.410.armv7l [ 96s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 96s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 96s] [ 96s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.pZk8kn [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd attr-2.5.1 [ 96s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/libattr-devel [ 96s] + export LC_ALL=C [ 96s] + LC_ALL=C [ 96s] + export LICENSEDIR [ 96s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/libattr-devel [ 96s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm/usr/share/licenses/libattr-devel [ 96s] + exit 0 [ 96s] Provides: attr-devel = 2.5.1 libattr-devel = 2.5.1-5.410 libattr-devel(armv7l-32) = 2.5.1-5.410 pkgconfig(libattr) = 2.5.1 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires: /usr/bin/pkg-config libattr.so.1 [ 96s] Obsoletes: attr-devel <= 2.5.1 [ 96s] Processing files: attr-debuginfo-2.5.1-5.410.armv7l [ 96s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 96s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 96s] [ 96s] Provides: attr-debuginfo = 2.5.1-5.410 attr-debuginfo(armv7l-32) = 2.5.1-5.410 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Recommends: attr-debugsource(armv7l-32) = 2.5.1-5.410 [ 96s] Processing files: libattr-debuginfo-2.5.1-5.410.armv7l [ 96s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 96s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 96s] [ 96s] Provides: libattr-debuginfo = 2.5.1-5.410 libattr-debuginfo(armv7l-32) = 2.5.1-5.410 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Recommends: attr-debugsource(armv7l-32) = 2.5.1-5.410 [ 96s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm [ 96s] Wrote: /home/abuild/rpmbuild/SRPMS/attr-2.5.1-5.410.src.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-2.5.1-5.410.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-debugsource-2.5.1-5.410.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-2.5.1-5.410.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-devel-2.5.1-5.410.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-debuginfo-2.5.1-5.410.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-debuginfo-2.5.1-5.410.armv7l.rpm [ 96s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.nCqa1p [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd attr-2.5.1 [ 96s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-5.410.arm [ 96s] + exit 0 [ 96s] ... checking for files with abuild user/group [ 96s] ... creating baselibs [ 97s] no targets for arch armv7l, nothing to do [ 97s] [ 97s] obsnw02 finished "build attr.spec" at Thu Sep 15 03:58:14 UTC 2022. [ 97s]