[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw16 started "build _service:gbs:autoconf213.spec" at Thu Jan 13 07:48:54 UTC 2022. [ 0s] [ 0s] Building autoconf213 for project 'Tizen:Base' repository 'standard' arch 'armv7hl' srcmd5 'e0094b3a22b470452a4e890fac5b8760' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:autoconf213.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:autoconf213.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:autoconf213.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 6s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 7s] [31/41] preinstalling libmount... [ 7s] [32/41] preinstalling smack... [ 7s] [33/41] preinstalling bzip2... [ 7s] [34/41] preinstalling libmagic... [ 7s] [35/41] preinstalling libxml2... [ 7s] [36/41] preinstalling tar... [ 7s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7hl postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/98] installing libmagic-data-5.41-6.201 [ 9s] [2/98] installing setup-0.9-5.6 [ 9s] [3/98] installing filesystem-3.1-4.1 [ 9s] [4/98] installing glibc-2.30-13.36 [ 9s] [5/98] installing libatomic-9.2.0-15.31 [ 10s] [6/98] installing libgcc-9.2.0-15.31 [ 10s] [7/98] installing bash-3.2.57-4.5 [ 10s] [8/98] installing cpio-2.8-5.3 [ 10s] [9/98] installing diffutils-3.3-4.3 [ 10s] [10/98] installing findutils-4.3.8-5.255 [ 10s] [11/98] installing gdbm-1.8.3-3.551 [ 10s] [12/98] installing hostname-3.23-3.3 [ 10s] [13/98] installing libattr-2.5.1-5.241 [ 11s] [14/98] installing libblkid-2.36-10.1 [ 11s] [15/98] installing libbz2-1.0.8-5.123 [ 11s] [16/98] installing libcap-2.24-4.252 [ 12s] [17/98] installing libext2fs-1.46.0-4.34 [ 12s] [18/98] installing libfreebl3-3.34.1-3.402 [ 12s] [19/98] installing libgfortran-9.2.0-15.31 [ 14s] [20/98] installing libgomp-9.2.0-15.31 [ 14s] [21/98] installing libitm-9.2.0-15.31 [ 15s] [22/98] installing libltdl-2.4.2-3.435 [ 15s] [23/98] installing liblua-5.1.5-3.270 [ 15s] [24/98] installing liblzma-5.2.5-5.180 [ 16s] [25/98] installing libopenssl11-1.1.1l-6.144 [ 16s] [26/98] installing libpcre-8.44-4.45 [ 16s] [27/98] installing libpopt-1.16-3.503 [ 17s] [28/98] installing libsmack-1.3.1-4.243 [ 17s] [29/98] installing libsmartcols-2.36-10.1 [ 17s] [30/98] installing libsqlite-3.33.0-4.420 [ 17s] [31/98] installing libstdc++-9.2.0-15.31 [ 18s] [32/98] installing libuuid-2.36-10.1 [ 18s] [33/98] installing libzstd1-1.4.5-2.87 [ 18s] [34/98] installing m4-1.4.19-4.1 [ 19s] [35/98] installing makeinfo-4.13a-2.108 [ 19s] [36/98] installing net-tools-2.0_20121208git-4.4 [ 19s] [37/98] installing nspr-4.12-3.506 [ 19s] [38/98] installing patch-2.7-6.328 [ 19s] [39/98] installing pkg-config-0.28-3.501 [ 19s] [40/98] installing sed-4.1c-4.2 [ 19s] [41/98] installing update-alternatives-1.20.5-3.4 [ 19s] [42/98] installing which-2.17-4.4 [ 19s] [43/98] installing zlib-1.2.11-3.531 [ 20s] [44/98] installing build-compare-2015.04.28-3.181 [ 20s] [45/98] installing libstdc++-devel-9.2.0-15.31 [ 20s] [46/98] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 21s] [47/98] installing terminfo-base-full-6.2-7.188 [ 22s] [48/98] installing cpp-9.2.0-15.31 [ 22s] [49/98] installing gcc-c++-9.2.0-15.31 [ 23s] [50/98] installing binutils-2.33.1-9.195 [ 24s] [51/98] installing coreutils-6.9-5.89 [ 24s] [52/98] installing gawk-3.1.5-4.4 [ 24s] [53/98] installing grep-2.5.2-3.4 [ 24s] [54/98] installing libacl-2.2.53-4.456 [ 24s] [55/98] installing libcc1-9.2.0-15.31 [ 24s] [56/98] installing libelf-0.178-3.356 [ 25s] [57/98] installing libmount-2.36-10.1 [ 25s] [58/98] installing libubsan-9.2.0-15.31 [ 25s] [59/98] installing make-4.0-2.122 [ 26s] [60/98] installing nss-certs-3.34.1-3.402 [ 26s] [61/98] installing smack-1.3.1-4.243 [ 26s] [62/98] installing bzip2-1.0.8-5.123 [ 26s] [63/98] installing libfdisk-2.36-10.1 [ 26s] [64/98] installing libmagic-5.41-6.201 [ 26s] [65/98] installing libxml2-2.9.12-7.95 [ 27s] [66/98] installing perl-5.32.0-6.21 [ 29s] [67/98] installing xz-5.2.5-5.180 [ 29s] [68/98] installing build-mkbaselibs-20120927-3.3 [ 29s] [69/98] installing linux-glibc-devel-3.10-4.367 [ 30s] [70/98] installing autoconf-2.69-5.36 [ 30s] [71/98] installing file-5.41-6.201 [ 30s] [72/98] installing glibc-locale-2.30-13.36 [ 31s] [73/98] installing tar-1.17-3.3 [ 31s] [74/98] installing gzip-1.3.12-3.506 [ 31s] [75/98] installing libncurses6-6.2-7.188 [ 31s] [76/98] installing pam-1.1.6-4.1 [ 31s] [77/98] installing texinfo-4.13a-2.108 [ 32s] [78/98] installing tzdata-2021e-5.1 [ 32s] [79/98] installing libdw-0.178-3.356 [ 32s] [80/98] installing libarchive-3.5.2-3.21 [ 33s] [81/98] installing gcc-9.2.0-15.31 [ 33s] [82/98] installing libncurses-6.2-7.188 [ 33s] [83/98] installing glibc-devel-2.30-13.36 [ 34s] [84/98] installing qemu-accel-x86_64-armv7hl-0.4-9.9 [ 43s] [85/98] installing automake-1.15.1-5.48 [ 44s] [86/98] installing less-466-3.4 [ 44s] [87/98] installing libreadline-5.2-3.154 [ 44s] [88/98] installing procps-ng-3.3.16-3.4 [ 44s] [89/98] installing libasm-0.178-3.356 [ 44s] [90/98] installing build-20120927-3.3 [ 44s] [91/98] installing libtool-2.4.2-3.435 [ 44s] [92/98] installing elfutils-0.178-3.356 [ 44s] [93/98] installing util-linux-2.36-10.1 [ 45s] [94/98] installing util-linux-su-2.36-10.1 [ 45s] [95/98] installing nss-3.34.1-3.402 [ 45s] [96/98] installing libsoftokn3-3.34.1-3.402 [ 45s] [97/98] installing rpm-4.14.1.1-9.29 [ 46s] [98/98] installing rpm-build-4.14.1.1-9.29 [ 46s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 46s] now finalizing build dir... [ 46s] Running build time source services... [ 47s] build target is armv7hl-tizen-linux [ 47s] ----------------------------------------------------------------- [ 47s] I have the following modifications for autoconf213.spec: [ 47s] 9c9 [ 47s] < Release: 1 [ 47s] --- [ 47s] > Release: 3.7 [ 47s] ----------------------------------------------------------------- [ 47s] ----- building autoconf213.spec (user abuild) [ 47s] ----------------------------------------------------------------- [ 47s] ----------------------------------------------------------------- [ 47s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/e0094b3a22b470452a4e890fac5b8760-autoconf213' -ba /home/abuild/rpmbuild/SOURCES/autoconf213.spec [ 47s] Building target platforms: armv7hl-tizen-linux [ 47s] Building for target armv7hl-tizen-linux [ 47s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Brvuu4 [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + rm -rf autoconf-2.13 [ 47s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.13.tar.bz2 [ 47s] + /bin/tar -xof - [ 47s] + STATUS=0 [ 47s] + '[' 0 -ne 0 ']' [ 47s] + cd autoconf-2.13 [ 47s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 47s] + echo 'Patch #0 (0001-autoconf-2.12-race.patch):' [ 47s] Patch #0 (0001-autoconf-2.12-race.patch): [ 47s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 47s] patching file autoconf.sh [ 47s] patching file autoheader.sh [ 47s] patching file autoupdate.sh [ 47s] + echo 'Patch #1 (0002-autoconf-2.13-mawk.patch):' [ 47s] Patch #1 (0002-autoconf-2.13-mawk.patch): [ 47s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 47s] patching file acspecific.m4 [ 47s] patching file autoconf.texi [ 47s] patching file configure [ 47s] + echo 'Patch #2 (0003-autoconf-2.13-notmp.patch):' [ 47s] Patch #2 (0003-autoconf-2.13-notmp.patch): [ 47s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 47s] patching file autoconf.sh [ 47s] patching file autoupdate.sh [ 47s] + echo 'Patch #3 (0004-autoconf-2.13-c-exit.patch):' [ 47s] Patch #3 (0004-autoconf-2.13-c-exit.patch): [ 47s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 47s] patching file acgeneral.m4 [ 47s] patching file acspecific.m4 [ 48s] + echo 'Patch #4 (0005-autoconf-2.13-headers.patch):' [ 48s] Patch #4 (0005-autoconf-2.13-headers.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file acspecific.m4 [ 48s] + echo 'Patch #5 (0006-autoconf-2.13-autoscan.patch):' [ 48s] Patch #5 (0006-autoconf-2.13-autoscan.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file autoscan.pl [ 48s] + echo 'Patch #6 (0007-autoconf-2.13-exit.patch):' [ 48s] Patch #6 (0007-autoconf-2.13-exit.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file acgeneral.m4 [ 48s] + echo 'Patch #7 (0008-autoconf-2.13-wait3test.patch):' [ 48s] Patch #7 (0008-autoconf-2.13-wait3test.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file acspecific.m4 [ 48s] + echo 'Patch #8 (0009-autoconf-2.13-make-defs-62361.patch):' [ 48s] Patch #8 (0009-autoconf-2.13-make-defs-62361.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file acgeneral.m4 [ 48s] + echo 'Patch #9 (0010-autoconf-2.13-versioning.patch):' [ 48s] Patch #9 (0010-autoconf-2.13-versioning.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file Makefile.in [ 48s] + echo 'Patch #10 (0011-autoconf213-destdir.patch):' [ 48s] Patch #10 (0011-autoconf213-destdir.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file Makefile.in [ 48s] + echo 'Patch #11 (0012-autoconf213-info.patch):' [ 48s] Patch #11 (0012-autoconf213-info.patch): [ 48s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 48s] patching file Makefile.in [ 48s] patching file autoconf.texi [ 48s] + cp /home/abuild/rpmbuild/SOURCES/autoconf213.manifest . [ 48s] + mv autoconf.texi autoconf213.texi [ 48s] + rm -f autoconf.info [ 48s] + exit 0 [ 48s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.C1zk54 [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd autoconf-2.13 [ 48s] ++ uname -m [ 48s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CFLAGS [ 48s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CXXFLAGS [ 48s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 48s] + export FFLAGS [ 48s] + LDFLAGS= [ 48s] + export LDFLAGS [ 48s] + ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 [ 48s] creating cache ./config.cache [ 48s] checking for gm4... no [ 48s] checking for gnum4... no [ 48s] checking for m4... /bin/m4 [ 48s] checking for gawk... gawk [ 48s] checking for perl... /bin/perl [ 48s] checking for a BSD compatible install... /bin/install -c [ 48s] updating cache ./config.cache [ 48s] creating ./config.status [ 48s] creating Makefile [ 48s] creating testsuite/Makefile [ 49s] + make [ 49s] cd . && \ [ 49s] rm -f configure configure.tmp && \ [ 49s] /bin/m4 autoconf.m4 configure.in > configure.tmp && \ [ 49s] chmod +x configure.tmp && mv configure.tmp configure [ 49s] /bin/sh ./config.status --recheck [ 49s] running /bin/sh ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 --no-create --no-recursion [ 49s] loading cache ./config.cache [ 49s] checking for gm4... (cached) /bin/m4 [ 49s] checking for gawk... (cached) gawk [ 49s] checking for perl... (cached) /bin/perl [ 49s] checking for a BSD compatible install... (cached) /bin/install -c [ 49s] creating ./config.status [ 49s] /bin/sh ./config.status [ 49s] creating Makefile [ 49s] creating testsuite/Makefile [ 49s] rm -f autoconf autoconf.tmp [ 49s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf [ 49s] rm -f autoheader autoheader.tmp [ 49s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader [ 49s] rm -f autoreconf autoreconf.tmp [ 49s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf [ 49s] rm -f autoupdate autoupdate.tmp [ 49s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate [ 49s] rm -f ifnames ifnames.tmp [ 49s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames [ 49s] rm -f autoscan autoscan.tmp [ 49s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan [ 49s] freezing autoconf.m4 [ 50s] freezing autoheader.m4 [ 50s] makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info [ 50s] ./autoconf213.texi:784: warning: `(' follows defined name `AC_CONFIG_AUX_DIR' instead of whitespace. [ 50s] + exit 0 [ 50s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.bgt1h3 [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd autoconf-2.13 [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm [ 50s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm [ 50s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm install [ 50s] /bin/sh ./mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/bin /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/info /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/autoconf-2.13 [ 50s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr [ 50s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/bin [ 50s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share [ 50s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/info [ 50s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/autoconf-2.13 [ 50s] if test -f autoconf213.info; then \ [ 50s] for i in *.info*; do \ [ 50s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/info/$i; \ [ 50s] done; \ [ 50s] else \ [ 50s] for i in ./*.info*; do \ [ 50s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/info/`echo $i | sed 's|^./||'`; \ [ 50s] done; \ [ 50s] fi [ 50s] for p in autoconf autoheader autoreconf autoupdate ifnames ; do \ [ 50s] /bin/install -c $p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/bin/`echo $p|sed 's,$,-2.13,; '`; \ [ 50s] done [ 51s] for i in autoconf.m4f autoheader.m4f; do \ [ 51s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/autoconf-2.13/$i; \ [ 51s] done [ 51s] for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \ [ 51s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/autoconf-2.13/$i; \ [ 51s] done [ 51s] if test -f autoscan; then \ [ 51s] /bin/install -c autoscan /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/bin/`echo autoscan|sed 's,$,-2.13,; '`; \ [ 51s] for i in acfunctions acheaders acidentifiers acprograms \ [ 51s] acmakevars; do \ [ 51s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm//usr/share/autoconf-2.13/$i; \ [ 51s] done; \ [ 51s] else :; fi [ 51s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/info/dir [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm -regex '.*\.la$' [ 51s] + xargs rm -f -- [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm -regex '.*\.a$' [ 51s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/info/standards.info [ 51s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 2.13-3.7 --unique-debug-src-base autoconf213-2.13-3.7.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/autoconf-2.13 [ 51s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debuginfo.manifest [ 51s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debugsource.manifest [ 51s] + /usr/lib/rpm/check-buildroot [ 51s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm [ 52s] Processing files: autoconf213-2.13-3.7.noarch [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.AMUSY1 [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd autoconf-2.13 [ 52s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + export LC_ALL=C [ 52s] + LC_ALL=C [ 52s] + export DOCDIR [ 52s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm/usr/share/doc/packages/autoconf213 [ 52s] + exit 0 [ 53s] Provides: autoconf213 = 2.13-3.7 [ 53s] Requires(interp): /bin/sh /bin/sh [ 53s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 53s] Requires(post): /bin/sh [ 53s] Requires(postun): /bin/sh [ 53s] Requires: /bin/perl /bin/sh [ 53s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm [ 53s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-3.7.src.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-3.7.noarch.rpm [ 53s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.boTyc6 [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd autoconf-2.13 [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-3.7.arm [ 53s] + exit 0 [ 53s] ... checking for files with abuild user/group [ 53s] ... creating baselibs [ 54s] ... comparing built packages with the former built [ 54s] /usr/lib/build/pkg-diff.sh [ 54s] compare /.build.oldpackages/autoconf213-2.13-3.6.src.rpm /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-3.7.src.rpm [ 54s] This is not a prerelease project. Compare the project name. [ 54s] comparing rpmtags [ 54s] comparing RELEASE [ 54s] comparing PROVIDES [ 54s] comparing scripts [ 54s] comparing filelist [ 54s] comparing file checksum [ 54s] RPM meta information is identical [ 55s] compare /.build.oldpackages/autoconf213-2.13-3.6.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-3.7.noarch.rpm [ 55s] Comparing autoconf213-2.13-3.6.noarch.rpm to autoconf213-2.13-3.7.noarch.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] creating rename script [ 55s] RPM file checksum differs. [ 55s] Extracting packages [ 55s] /usr/share/autoconf-2.13/autoconf.m4f differs (M4 macro processor script, ASCII text) [ 55s] --- old//usr/share/autoconf-2.13/autoconf.m4f 2022-01-13 00:28:51.000000000 +0000 [ 55s] +++ new//usr/share/autoconf-2.13/autoconf.m4f 2022-01-13 07:49:45.000000000 +0000 [ 55s] @@ -1,173 +1,311 @@ [ 55s] -# This is a frozen state file generated by GNU M4 1.4.17 [ 55s] +# This is a frozen state file generated by GNU M4 1.4.19 [ 55s] V1 [ 55s] Q1,1 [ 55s] [] [ 55s] -T15,909 [ 55s] -AC_PROG_F77_C_OAC_PRO([AC_PROG_F77_C_O])AC_BEFORE([$0], [AC_PROG_F77])dnl [ 55s] -AC_MSG_CHECKING(whether $F77 understand -c and -o together) [ 55s] -set dummy $F77; ac_f77="`echo [$]2 | [ 55s] -changequote(, )dnl [ 55s] -sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`" [ 55s] -changequote([, ])dnl [ 55s] -AC_CACHE_VAL(ac_cv_prog_f77_${ac_f77}_c_o, [ 55s] -[cat > conftest.f << EOF [ 55s] - program conftest [ 55s] - end [ 55s] -EOF [ 55s] -# We do the `AC_TRY_EVAL' test twice because some compilers refuse to [ 55s] -# overwrite an existing `.o' file with `-o', although they will create [ 55s] -# one. [ 55s] -ac_try='$F77 $FFLAGS -c conftest.f -o conftest.o 1>&AC_FD_CC' [ 55s] -if AC_TRY_EVAL(ac_try) && test -f conftest.o && AC_TRY_EVAL(ac_try); then [ 55s] - eval ac_cv_prog_f77_${ac_f77}_c_o=yes [ 55s] -else [ 55s] - eval ac_cv_prog_f77_${ac_f77}_c_o=no [ 55s] -fi [ 55s] -rm -f conftest* [ 55s] -])dnl [ 55s] -if eval "test \"`echo '$ac_cv_prog_f77_'${ac_f77}_c_o`\" = yes"; then [ 55s] - AC_MSG_RESULT(yes) [ 55s] -else [ 55s] - AC_MSG_RESULT(no) [ 55s] - AC_DEFINE(F77_NO_MINUS_C_MINUS_O) [ 55s] -fi [ 55s] +T8,50 [ 55s] +AC_WAIT3AC_PRO([AC_WAIT3])indir([AC_FUNC_WAIT3])[]AC_EPI() [ 55s] +F8,8 [ 55s] +patsubstpatsubst [ 55s] +T17,207 [ 55s] +AC_CONFIG_SUBDIRSAC_PRO([AC_CONFIG_SUBDIRS])AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl [ 55s] +define([AC_LIST_SUBDIRS], ifdef([AC_LIST_SUBDIRS], [AC_LIST_SUBDIRS ],)[$1])dnl [ 55s] +subdirs="AC_LIST_SUBDIRS" [ 55s] +AC_SUBST(subdirs)dnl [ 55s] []AC_EPI() [ 55s] -T6,233 [ 55s] -AC_AIXAC_PRO([AC_AIX])AC_BEFORE([$0], [AC_TRY_COMPILE])dnl [ 55s] -AC_BEFORE([$0], [AC_TRY_RUN])dnl [ 55s] -AC_MSG_CHECKING(for AIX) [ 55s] -AC_EGREP_CPP(yes, [ 55s] -[#ifdef _AIX [ 55s] - yes [ 55s] -#endif [ 55s] -], [AC_MSG_RESULT(yes); AC_DEFINE(_ALL_SOURCE)], AC_MSG_RESULT(no)) [ 55s] +T12,76 [ 55s] +AC_PROG_YACCAC_PRO([AC_PROG_YACC])AC_CHECK_PROGS(YACC, 'bison -y' byacc, yacc)[]AC_EPI() [ 55s] +T14,268 [ 55s] +AC_CHECK_FUNCSAC_PRO([AC_CHECK_FUNCS])for ac_func in $1 [ 55s] +do [ 55s] +AC_CHECK_FUNC($ac_func, [ 55s] +[changequote(, )dnl [ 55s] + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` [ 55s] +changequote([, ])dnl [ 55s] + AC_DEFINE_UNQUOTED($ac_tr_func) $2], $3)dnl [ 55s] +done [ 55s] []AC_EPI() [ 55s] -F6,6 [ 55s] -substrsubstr [ 55s] -T14,449 [ 55s] -AC_INIT_NOTICEAC_PRO([AC_INIT_NOTICE])# Guess values for system-dependent variables and create Makefiles. [ 55s] -# Generated automatically using autoconf version 2.13 [ 55s] -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. [ 55s] -# [ 55s] -# This configure script is free software; the Free Software Foundation [ 55s] -# gives unlimited permission to copy, distribute and modify it. [ 55s] - [ 55s] -# Defaults: [ 55s] -ac_help= [ 55s] -ac_default_prefix=/usr/local [ 55s] -[#] Any additions from configure.in:[]AC_EPI() [ 55s] -T22,1398 [ 55s] -AC_SYS_LONG_FILE_NAMESAC_PRO([AC_SYS_LONG_FILE_NAMES])AC_CACHE_CHECK(for long file names, ac_cv_sys_long_file_names, [ 55s] -[ac_cv_sys_long_file_names=yes [ 55s] -# Test for long file names in all the places we know might matter: [ 55s] -# . the current directory, where building will happen [ 55s] -# $prefix/lib where we will be installing things [ 55s] -# $exec_prefix/lib likewise [ 55s] -# eval it to expand exec_prefix. [ 55s] -# $TMPDIR if set, where it might want to write temporary files [ 55s] -# if $TMPDIR is not set: [ 55s] -# /tmp where it might want to write temporary files [ 55s] -# /var/tmp likewise [ 55s] -# /usr/tmp likewise [ 55s] -if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then [ 55s] - ac_tmpdirs="$TMPDIR" [ 55s] -else [ 55s] - ac_tmpdirs='/tmp /var/tmp /usr/tmp' [ 55s] -fi [ 55s] -for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do [ 55s] - test -d $ac_dir || continue [ 55s] - test -w $ac_dir || continue # It is less confusing to not echo anything here. [ 55s] - (echo 1 > $ac_dir/conftest9012345) 2>/dev/null [ 55s] - (echo 2 > $ac_dir/conftest9012346) 2>/dev/null [ 55s] - val=`cat $ac_dir/conftest9012345 2>/dev/null` [ 55s] - if test ! -f $ac_dir/conftest9012345 || test "$val" != 1; then [ 55s] - ac_cv_sys_long_file_names=no [ 55s] - rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null [ 55s] - break [ 55s] - fi [ 55s] - rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null [ 55s] -done]) [ 55s] -if test $ac_cv_sys_long_file_names = yes; then [ 55s] - AC_DEFINE(HAVE_LONG_FILE_NAMES) [ 55s] +T12,4 [ 55s] +AC_ACVERSION2.13 [ 55s] +T16,1 [ 55s] +AC_DIVERSION_SED8 [ 55s] +T13,264 [ 55s] +AC_TYPE_UID_TAC_PRO([AC_TYPE_UID_T])AC_CACHE_CHECK(for uid_t in sys/types.h, ac_cv_type_uid_t, [ 55s] +[AC_EGREP_HEADER(uid_t, sys/types.h, [ 55s] + ac_cv_type_uid_t=yes, ac_cv_type_uid_t=no)]) [ 55s] +if test $ac_cv_type_uid_t = no; then [ 55s] + AC_DEFINE(uid_t, int) [ 55s] + AC_DEFINE(gid_t, int) [ 55s] fi [ 55s] []AC_EPI() [ 55s] -T9,2921 [ 55s] -AC_OUTPUTtrap '' 1 2 15 [ 55s] -AC_CACHE_SAVE [ 55s] -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 [ 55s] +T19,780 [ 55s] +AC_CANONICAL_TARGETAC_PRO([AC_CANONICAL_TARGET])AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl [ 55s] +AC_MSG_CHECKING(target system type) [ 55s] [ 55s] -test "x$prefix" = xNONE && prefix=$ac_default_prefix [ 55s] -# Let make expand exec_prefix. [ 55s] -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' [ 55s] +dnl Set target_alias. [ 55s] +target_alias=$target [ 55s] +case "$target_alias" in [ 55s] +NONE) [ 55s] + case $nonopt in [ 55s] + NONE) target_alias=$host_alias ;; [ 55s] + *) target_alias=$nonopt ;; [ 55s] + esac ;; [ 55s] +esac [ 55s] [ 55s] -# Any assignment to VPATH causes Sun make to only execute [ 55s] -# the first set of double-colon rules, so remove it if not needed. [ 55s] -# If there is a colon in the path, we need to keep it. [ 55s] -if test "x$srcdir" = x.; then [ 55s] -changequote(, )dnl [ 55s] - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' [ 55s] +dnl Set the other target vars. [ 55s] +changequote(<<, >>)dnl [ 55s] +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` [ 55s] +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` [ 55s] +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` [ 55s] +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` [ 55s] changequote([, ])dnl [ 55s] -fi [ 55s] +AC_MSG_RESULT($target) [ 55s] +AC_SUBST(target)dnl [ 55s] +AC_SUBST(target_alias)dnl [ 55s] +AC_SUBST(target_cpu)dnl [ 55s] +AC_SUBST(target_vendor)dnl [ 55s] +AC_SUBST(target_os)dnl [ 55s] +[]AC_EPI() [ 55s] +T15,99 [ 55s] +AC_MSG_CHECKINGecho $ac_n "checking $1""... $ac_c" 1>&AC_FD_MSG [ 55s] +echo "configure:__oline__: checking $1" >&AC_FD_CC [ 55s] +T12,4290 [ 55s] +AC_FUNC_MMAPAC_PRO([AC_FUNC_MMAP])AC_CHECK_HEADERS(stdlib.h unistd.h sys/stat.h sys/types.h) [ 55s] +AC_CHECK_FUNCS(getpagesize) [ 55s] +AC_CACHE_CHECK(for working mmap, ac_cv_func_mmap_fixed_mapped, [ 55s] +[AC_TRY_RUN([ [ 55s] +/* Thanks to Mike Haertel and Jim Avera for this test. [ 55s] + Here is a matrix of mmap possibilities: [ 55s] + mmap private not fixed [ 55s] + mmap private fixed at somewhere currently unmapped [ 55s] + mmap private fixed at somewhere already mapped [ 55s] + mmap shared not fixed [ 55s] + mmap shared fixed at somewhere currently unmapped [ 55s] + mmap shared fixed at somewhere already mapped [ 55s] + For private mappings, we should verify that changes cannot be read() [ 55s] + back from the file, nor mmap's back from the file at a different [ 55s] + address. (There have been systems where private was not correctly [ 55s] + implemented like the infamous i386 svr4.0, and systems where the [ 55s] + VM page cache was not coherent with the filesystem buffer cache [ 55s] + like early versions of FreeBSD and possibly contemporary NetBSD.) [ 55s] + For shared mappings, we should conversely verify that changes get [ 55s] + propogated back to all the places they're supposed to be. [ 55s] [ 55s] -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 [ 55s] + Grep wants private fixed already mapped. [ 55s] + The main things grep needs to know about mmap are: [ 55s] + * does it exist and is it safe to write into the mmap'd area [ 55s] + * how to use it (BSD variants) */ [ 55s] [ 55s] obsnw16 finished "build autoconf213.spec" at Thu Jan 13 07:49:49 UTC 2022. [ 55s] Retried build at Mon Jan 24 17:52:20 2022 returned same result, skipped Retried build at Fri Jan 28 13:32:42 2022 returned same result, skipped Retried build at Wed Feb 23 17:43:38 2022 returned same result, skipped Retried build at Thu Mar 3 02:08:35 2022 returned same result, skipped Retried build at Thu Mar 10 06:57:20 2022 returned same result, skipped Retried build at Tue Mar 22 09:31:05 2022 returned same result, skipped Retried build at Sat Apr 9 15:26:07 2022 returned same result, skipped Retried build at Tue Apr 19 07:22:18 2022 returned same result, skipped Retried build at Tue May 17 06:49:19 2022 returned same result, skipped