[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obsnw10 started "build _service:gbs:libsigc++.spec" at Wed Jan 12 06:18:48 UTC 2022. [ 1s] [ 1s] Building libsigc++ for project 'Tizen:Base' repository 'standard' arch 'armv7hl' srcmd5 'e4b0995d71d735d00c1d3861cbd75d29' [ 1s] [ 1s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:libsigc++.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:libsigc++.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:libsigc++.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7hl postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/102] installing libmagic-data-5.41-6.174 [ 9s] [2/102] installing setup-0.9-5.5 [ 9s] [3/102] installing filesystem-3.1-4.1 [ 10s] [4/102] installing glibc-2.30-13.23 [ 10s] [5/102] installing libatomic-9.2.0-15.20 [ 10s] [6/102] installing libgcc-9.2.0-15.20 [ 11s] [7/102] installing bash-3.2.57-4.5 [ 11s] [8/102] installing cpio-2.8-5.3 [ 11s] [9/102] installing diffutils-3.3-4.3 [ 11s] [10/102] installing findutils-4.3.8-5.226 [ 11s] [11/102] installing gdbm-1.8.3-3.520 [ 11s] [12/102] installing hostname-3.23-3.3 [ 11s] [13/102] installing libattr-2.5.1-5.211 [ 11s] [14/102] installing libblkid-2.36-9.1 [ 12s] [15/102] installing libbz2-1.0.8-5.93 [ 12s] [16/102] installing libcap-2.24-4.223 [ 12s] [17/102] installing libext2fs-1.46.0-4.33 [ 13s] [18/102] installing libfreebl3-3.34.1-3.378 [ 13s] [19/102] installing libgfortran-9.2.0-15.20 [ 14s] [20/102] installing libgomp-9.2.0-15.20 [ 14s] [21/102] installing libgpg-error-1.43-3.1 [ 14s] [22/102] installing libitm-9.2.0-15.20 [ 14s] [23/102] installing libltdl-2.4.2-3.405 [ 15s] [24/102] installing liblua-5.1.5-3.260 [ 15s] [25/102] installing liblzma-5.2.5-5.165 [ 18s] [26/102] installing libopenssl11-1.1.1l-6.123 [ 18s] [27/102] installing libpcre-8.44-4.44 [ 18s] [28/102] installing libpopt-1.16-3.475 [ 19s] [29/102] installing libsmack-1.3.1-4.215 [ 19s] [30/102] installing libsmartcols-2.36-9.1 [ 19s] [31/102] installing libsqlite-3.33.0-4.391 [ 19s] [32/102] installing libstdc++-9.2.0-15.20 [ 20s] [33/102] installing libuuid-2.36-9.1 [ 20s] [34/102] installing libzstd1-1.4.5-2.59 [ 20s] [35/102] installing m4-1.4.17-3.3 [ 20s] [36/102] installing net-tools-2.0_20121208git-4.4 [ 21s] [37/102] installing nspr-4.12-3.477 [ 21s] [38/102] installing patch-2.7-6.300 [ 21s] [39/102] installing pkg-config-0.28-3.472 [ 21s] [40/102] installing sed-4.1c-4.2 [ 21s] [41/102] installing update-alternatives-1.20.5-3.4 [ 21s] [42/102] installing which-2.17-4.4 [ 21s] [43/102] installing zlib-1.2.11-3.501 [ 21s] [44/102] installing build-compare-2015.04.28-3.171 [ 21s] [45/102] installing libstdc++-devel-9.2.0-15.20 [ 22s] [46/102] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 23s] [47/102] installing terminfo-base-full-6.2-7.162 [ 24s] [48/102] installing cpp-9.2.0-15.20 [ 24s] [49/102] installing gcc-c++-9.2.0-15.20 [ 25s] [50/102] installing binutils-2.33.1-9.170 [ 26s] [51/102] installing coreutils-6.9-5.82 [ 26s] [52/102] installing doxygen-1.9.2-2.1 [ 26s] [53/102] installing gawk-3.1.5-4.4 [ 26s] [54/102] installing grep-2.5.2-3.4 [ 26s] [55/102] installing libacl-2.2.53-4.426 [ 26s] [56/102] installing libcc1-9.2.0-15.20 [ 27s] [57/102] installing libelf-0.178-3.327 [ 27s] [58/102] installing libgcrypt-1.8.3-2.2 [ 27s] [59/102] installing libmount-2.36-9.1 [ 28s] [60/102] installing libubsan-9.2.0-15.20 [ 28s] [61/102] installing make-4.0-2.115 [ 28s] [62/102] installing nss-certs-3.34.1-3.378 [ 28s] [63/102] installing smack-1.3.1-4.215 [ 28s] [64/102] installing bzip2-1.0.8-5.93 [ 29s] [65/102] installing libfdisk-2.36-9.1 [ 29s] [66/102] installing libmagic-5.41-6.174 [ 29s] [67/102] installing libxml2-2.9.12-7.85 [ 29s] [68/102] installing perl-5.32.0-5.57 [ 32s] [69/102] installing xz-5.2.5-5.165 [ 32s] [70/102] installing build-mkbaselibs-20120927-3.3 [ 32s] [71/102] installing linux-glibc-devel-3.10-4.338 [ 33s] [72/102] installing autoconf-2.69-5.16 [ 35s] [73/102] installing file-5.41-6.174 [ 36s] [74/102] installing glibc-locale-2.30-13.23 [ 38s] [75/102] installing mm-common-1.0.1-2.4 [ 39s] [76/102] installing tar-1.17-3.3 [ 39s] [77/102] installing gzip-1.3.12-3.478 [ 39s] [78/102] installing libncurses6-6.2-7.162 [ 39s] [79/102] installing pam-1.1.6-4.1 [ 40s] [80/102] installing tzdata-2021e-5.1 [ 41s] [81/102] installing libdw-0.178-3.327 [ 41s] [82/102] installing libxslt-1.1.34-1.4 [ 41s] [83/102] installing libarchive-3.5.1-2.202 [ 42s] [84/102] installing gcc-9.2.0-15.20 [ 42s] [85/102] installing libncurses-6.2-7.162 [ 42s] [86/102] installing glibc-devel-2.30-13.23 [ 43s] [87/102] installing qemu-accel-x86_64-armv7hl-0.4-9.7 [ 53s] [88/102] installing automake-1.15.1-5.21 [ 54s] [89/102] installing less-466-3.4 [ 54s] [90/102] installing libreadline-5.2-3.147 [ 54s] [91/102] installing procps-ng-3.3.16-3.4 [ 55s] [92/102] installing libasm-0.178-3.327 [ 55s] [93/102] installing libxslt-tools-1.1.34-1.4 [ 55s] [94/102] installing build-20120927-3.3 [ 55s] [95/102] installing libtool-2.4.2-3.405 [ 55s] [96/102] installing elfutils-0.178-3.327 [ 55s] [97/102] installing util-linux-2.36-9.1 [ 55s] [98/102] installing util-linux-su-2.36-9.1 [ 55s] [99/102] installing nss-3.34.1-3.378 [ 56s] [100/102] installing libsoftokn3-3.34.1-3.378 [ 56s] [101/102] installing rpm-4.14.1.1-9.19 [ 57s] [102/102] installing rpm-build-4.14.1.1-9.19 [ 57s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 57s] now finalizing build dir... [ 57s] Running build time source services... [ 58s] build target is armv7hl-tizen-linux [ 58s] ----------------------------------------------------------------- [ 58s] I have the following modifications for libsigc++.spec: [ 58s] 22c22 [ 58s] < Release: 0 [ 58s] --- [ 58s] > Release: 4.1 [ 58s] ----------------------------------------------------------------- [ 58s] ----- building libsigc++.spec (user abuild) [ 58s] ----------------------------------------------------------------- [ 58s] ----------------------------------------------------------------- [ 58s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/e4b0995d71d735d00c1d3861cbd75d29-libsigc++' -ba /home/abuild/rpmbuild/SOURCES/libsigc++.spec [ 58s] Building target platforms: armv7hl-tizen-linux [ 58s] Building for target armv7hl-tizen-linux [ 58s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.wTvv1l [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + rm -rf libsigc++-2.10.7 [ 58s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/libsigc++-2.10.7.tar.xz [ 58s] + /bin/tar -xof - [ 59s] + STATUS=0 [ 59s] + '[' 0 -ne 0 ']' [ 59s] + cd libsigc++-2.10.7 [ 59s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 59s] + cp /home/abuild/rpmbuild/SOURCES/libsigc++.manifest . [ 59s] + /bin/patch -p1 [ 59s] patching file autogen.sh [ 59s] + exit 0 [ 59s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.jKhzLl [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd libsigc++-2.10.7 [ 59s] ++ uname -m [ 59s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 59s] + export CFLAGS [ 59s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 59s] + export CXXFLAGS [ 59s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 59s] + export FFLAGS [ 59s] + LDFLAGS= [ 59s] + export LDFLAGS [ 59s] + ./autogen.sh [ 59s] mm-common-prepare: putting auxiliary files in './build'. [ 59s] mm-common-prepare: copying file 'compile-binding.am' [ 59s] mm-common-prepare: copying file 'dist-changelog.am' [ 59s] mm-common-prepare: copying file 'doc-reference.am' [ 59s] mm-common-prepare: copying file 'generate-binding.am' [ 59s] mm-common-prepare: putting documentation utilities in './docs'. [ 59s] mm-common-prepare: copying file 'doc-install.pl' [ 59s] mm-common-prepare: copying file 'doc-postprocess.pl' [ 59s] mm-common-prepare: copying file 'doxygen.css' [ 59s] mm-common-prepare: copying file 'doxygen-extra.css' [ 59s] mm-common-prepare: copying file 'tagfile-to-devhelp2.xsl' [ 62s] autoreconf: Entering directory `.' [ 62s] autoreconf: configure.ac: not using Gettext [ 63s] autoreconf: running: aclocal --force --warnings=all -I build ${ACLOCAL_FLAGS} [ 72s] autoreconf: configure.ac: tracing [ 74s] autoreconf: running: libtoolize --copy --force [ 75s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build'. [ 75s] libtoolize: copying file `build/ltmain.sh' [ 75s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `build'. [ 75s] libtoolize: copying file `build/libtool.m4' [ 75s] libtoolize: copying file `build/ltoptions.m4' [ 75s] libtoolize: copying file `build/ltsugar.m4' [ 75s] libtoolize: copying file `build/ltversion.m4' [ 76s] libtoolize: copying file `build/lt~obsolete.m4' [ 85s] autoreconf: running: /usr/bin/autoconf --force --warnings=all [ 89s] autoreconf: running: /usr/bin/autoheader --force --warnings=all [ 92s] autoreconf: running: automake --add-missing --copy --force-missing --warnings=all [ 95s] configure.ac:43: installing 'build/compile' [ 95s] configure.ac:43: installing 'build/config.guess' [ 95s] configure.ac:43: installing 'build/config.sub' [ 95s] configure.ac:28: installing 'build/install-sh' [ 95s] configure.ac:28: installing 'build/missing' [ 95s] Makefile.am: installing './INSTALL' [ 96s] examples/Makefile.am: installing 'build/depcomp' [ 97s] parallel-tests: installing 'build/test-driver' [ 97s] autoreconf: Leaving directory `.' [ 97s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 97s] + export CFLAGS [ 97s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 97s] + export CXXFLAGS [ 97s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 97s] + export FFLAGS [ 97s] + ./configure --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-maintainer-mode --disable-static [ 98s] checking for a BSD-compatible install... /bin/install -c [ 98s] checking whether build environment is sane... yes [ 99s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 99s] checking for gawk... gawk [ 99s] checking whether make sets $(MAKE)... yes [ 99s] checking whether make supports nested variables... yes [ 99s] checking whether UID '399' is supported by ustar format... yes [ 99s] checking whether GID '399' is supported by ustar format... yes [ 99s] checking how to create a ustar tar archive... gnutar [ 99s] checking whether make supports nested variables... (cached) yes [ 99s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 99s] checking whether make supports GNU make features... yes [ 99s] checking for armv7hl-tizen-linux-gnueabihf-g++... armv7hl-tizen-linux-gnueabihf-g++ [ 99s] checking whether the C++ compiler works... yes [ 99s] checking for C++ compiler default output file name... a.out [ 99s] checking for suffix of executables... [ 99s] checking whether we are cross compiling... no [ 99s] checking for suffix of object files... o [ 99s] checking whether we are using the GNU C++ compiler... yes [ 99s] checking whether armv7hl-tizen-linux-gnueabihf-g++ accepts -g... yes [ 99s] checking for style of include used by make... GNU [ 99s] checking dependency style of armv7hl-tizen-linux-gnueabihf-g++... gcc3 [ 99s] checking whether armv7hl-tizen-linux-gnueabihf-g++ supports C++11 features with -std=c++11... yes [ 100s] checking build system type... armv7hl-tizen-linux-gnueabihf [ 100s] checking host system type... armv7hl-tizen-linux-gnueabihf [ 100s] checking how to print strings... printf [ 100s] checking for armv7hl-tizen-linux-gnueabihf-gcc... armv7hl-tizen-linux-gnueabihf-gcc [ 100s] checking whether we are using the GNU C compiler... yes [ 100s] checking whether armv7hl-tizen-linux-gnueabihf-gcc accepts -g... yes [ 100s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to accept ISO C89... none needed [ 100s] checking whether armv7hl-tizen-linux-gnueabihf-gcc understands -c and -o together... yes [ 101s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 101s] checking for a sed that does not truncate output... /bin/sed [ 101s] checking for grep that handles long lines and -e... /bin/grep [ 101s] checking for egrep... /bin/grep -E [ 101s] checking for fgrep... /bin/grep -F [ 101s] checking for ld used by armv7hl-tizen-linux-gnueabihf-gcc... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 101s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 101s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 101s] checking the name lister (/bin/nm -B) interface... BSD nm [ 101s] checking whether ln -s works... yes [ 101s] checking the maximum length of command line arguments... 1572864 [ 101s] checking whether the shell understands some XSI constructs... yes [ 101s] checking whether the shell understands "+="... yes [ 101s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to armv7hl-tizen-linux-gnueabihf format... func_convert_file_noop [ 101s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to toolchain format... func_convert_file_noop [ 101s] checking for /usr/armv7hl-tizen-linux-gnueabihf/bin/ld option to reload object files... -r [ 101s] checking for armv7hl-tizen-linux-gnueabihf-objdump... no [ 101s] checking for objdump... objdump [ 101s] checking how to recognize dependent libraries... pass_all [ 101s] checking for armv7hl-tizen-linux-gnueabihf-dlltool... no [ 101s] checking for dlltool... no [ 101s] checking how to associate runtime and link libraries... printf %s\n [ 101s] checking for armv7hl-tizen-linux-gnueabihf-ar... no [ 101s] checking for ar... ar [ 101s] checking for archiver @FILE support... @ [ 101s] checking for armv7hl-tizen-linux-gnueabihf-strip... no [ 101s] checking for strip... strip [ 101s] checking for armv7hl-tizen-linux-gnueabihf-ranlib... no [ 101s] checking for ranlib... ranlib [ 101s] checking command to parse /bin/nm -B output from armv7hl-tizen-linux-gnueabihf-gcc object... ok [ 101s] checking for sysroot... no [ 101s] checking for armv7hl-tizen-linux-gnueabihf-mt... no [ 101s] checking for mt... no [ 101s] checking if : is a manifest tool... no [ 101s] checking how to run the C preprocessor... armv7hl-tizen-linux-gnueabihf-gcc -E [ 101s] checking for ANSI C header files... yes [ 102s] checking for sys/types.h... yes [ 102s] checking for sys/stat.h... yes [ 102s] checking for stdlib.h... yes [ 102s] checking for string.h... yes [ 102s] checking for memory.h... yes [ 102s] checking for strings.h... yes [ 102s] checking for inttypes.h... yes [ 102s] checking for stdint.h... yes [ 102s] checking for unistd.h... yes [ 102s] checking for dlfcn.h... yes [ 102s] checking for objdir... .libs [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no [ 103s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc static flag -static works... no [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes [ 103s] checking whether the armv7hl-tizen-linux-gnueabihf-gcc linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 103s] checking whether -lc should be explicitly linked in... no [ 103s] checking dynamic linker characteristics... GNU/Linux ld.so [ 103s] checking how to hardcode library paths into programs... immediate [ 103s] checking whether stripping libraries is possible... yes [ 103s] checking if libtool supports shared libraries... yes [ 103s] checking whether to build shared libraries... yes [ 103s] checking whether to build static libraries... no [ 103s] checking how to run the C++ preprocessor... armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 -E [ 103s] checking for ld used by armv7hl-tizen-linux-gnueabihf-g++ -std=c++11... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 103s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 103s] checking whether the armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 104s] checking for armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 option to produce PIC... -fPIC -DPIC [ 104s] checking if armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 PIC flag -fPIC -DPIC works... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 static flag -static works... no [ 104s] checking if armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 supports -c -o file.o... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 supports -c -o file.o... (cached) yes [ 104s] checking whether the armv7hl-tizen-linux-gnueabihf-g++ -std=c++11 linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 104s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 104s] checking how to hardcode library paths into programs... immediate [ 104s] checking for gm4... no [ 104s] checking for m4... m4 [ 104s] checking for perl... /bin/perl [ 104s] checking for dot... dot [ 104s] checking for doxygen... /bin/doxygen [ 104s] checking for xsltproc... /bin/xsltproc [ 104s] configure: WARNING: The documentation cannot be generated because [ 104s] not all of the required tools are available: dot [ 104s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 104s] checking pkg-config is at least version 0.9.0... yes [ 104s] checking if C++ compiler supports the use of a particular specialization when calling operator() template methods.... yes [ 105s] checking if C++ compiler supports the use of a particular specialization when calling operator() template methods omitting the template keyword.... yes [ 105s] checking if C++ preprocessor supports pragma push_macro() and pop_macro().... yes [ 105s] checking for non-standard Sun libCstd reverse_iterator... no [ 105s] checking which C++ compiler warning flags to use... -Wall [ 105s] configure: Deprecated API will be built, for backwards-compatibility. [ 105s] checking that generated files are newer than configure... done [ 105s] configure: creating ./config.status [ 108s] config.status: creating Makefile [ 108s] config.status: creating sigc++-2.0.pc [ 108s] config.status: creating sigc++-2.0-uninstalled.pc [ 108s] config.status: creating sigc++/Makefile [ 108s] config.status: creating examples/Makefile [ 108s] config.status: creating tests/Makefile [ 108s] config.status: creating docs/Makefile [ 109s] config.status: creating docs/reference/Doxyfile [ 109s] config.status: creating MSVC_NMake/sigc.rc [ 109s] config.status: creating config.h [ 109s] config.status: creating sigc++config.h [ 109s] config.status: executing depfiles commands [ 110s] config.status: executing libtool commands [ 111s] config.status: executing MSVC_NMake/sigc++config.h commands [ 111s] + make -j4 [ 111s] make all-recursive [ 111s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 111s] Making all in sigc++ [ 111s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 111s] GEN signal.h [ 111s] GEN limit_reference.h [ 111s] GEN functors/slot.h [ 111s] GEN functors/functor_trait.h [ 111s] GEN functors/ptr_fun.h [ 111s] GEN functors/mem_fun.h [ 111s] GEN adaptors/deduce_result_type.h [ 111s] GEN adaptors/adaptor_trait.h [ 112s] GEN adaptors/bind.h [ 112s] GEN adaptors/bind_return.h [ 112s] GEN adaptors/retype_return.h [ 112s] GEN adaptors/hide.h [ 112s] GEN adaptors/retype.h [ 112s] GEN adaptors/compose.h [ 112s] GEN adaptors/exception_catch.h [ 112s] GEN adaptors/lambda/base.h [ 112s] GEN adaptors/track_obj.h [ 112s] GEN adaptors/lambda/select.h [ 112s] GEN adaptors/lambda/lambda.cc [ 112s] make all-am [ 112s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 112s] CXX signal_base.lo [ 112s] CXX trackable.lo [ 112s] CXX connection.lo [ 112s] CXX functors/slot_base.lo [ 112s] CXX adaptors/lambda/lambda.lo [ 113s] CXXLD libsigc-2.0.la [ 114s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 114s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 114s] Making all in tests [ 114s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 114s] make[2]: Nothing to be done for 'all'. [ 114s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 114s] Making all in examples [ 114s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 114s] CXX hello_world.o [ 114s] CXX member_method.o [ 115s] CXXLD hello_world [ 115s] CXXLD member_method [ 115s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 115s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 116s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 116s] + exit 0 [ 116s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.J7Kgik [ 116s] + umask 022 [ 116s] + cd /home/abuild/rpmbuild/BUILD [ 116s] + cd libsigc++-2.10.7 [ 116s] + LANG=C [ 116s] + export LANG [ 116s] + unset DISPLAY [ 116s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm [ 116s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm [ 116s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm install [ 116s] Making install in sigc++ [ 116s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 116s] /bin/make install-am [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 116s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 116s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib' [ 116s] /bin/sh ../libtool --mode=install /bin/install -c libsigc-2.0.la '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib' [ 116s] libtool: install: /bin/install -c .libs/libsigc-2.0.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/libsigc-2.0.so.0.0.0 [ 116s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib && { ln -s -f libsigc-2.0.so.0.0.0 libsigc-2.0.so.0 || { rm -f libsigc-2.0.so.0 && ln -s libsigc-2.0.so.0.0.0 libsigc-2.0.so.0; }; }) [ 116s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib && { ln -s -f libsigc-2.0.so.0.0.0 libsigc-2.0.so || { rm -f libsigc-2.0.so && ln -s libsigc-2.0.so.0.0.0 libsigc-2.0.so; }; }) [ 116s] libtool: install: /bin/install -c .libs/libsigc-2.0.lai /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/libsigc-2.0.la [ 116s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 116s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++' [ 116s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/functors' [ 116s] /bin/install -c -m 644 functors/functors.h functors/slot_base.h functors/functor_trait.h functors/slot.h functors/ptr_fun.h functors/mem_fun.h '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/functors' [ 116s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/adaptors/lambda' [ 116s] /bin/install -c -m 644 adaptors/lambda/base.h adaptors/lambda/select.h '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/adaptors/lambda' [ 116s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/adaptors' [ 116s] /bin/install -c -m 644 adaptors/adaptors.h adaptors/bound_argument.h adaptors/deduce_result_type.h adaptors/adaptor_trait.h adaptors/bind.h adaptors/bind_return.h adaptors/retype_return.h adaptors/hide.h adaptors/retype.h adaptors/compose.h adaptors/exception_catch.h adaptors/track_obj.h '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/adaptors' [ 116s] /bin/install -c -m 644 sigc++.h bind.h bind_return.h connection.h reference_wrapper.h retype_return.h signal_base.h slot.h trackable.h type_traits.h visit_each.h signal.h limit_reference.h '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/include/sigc++-2.0/sigc++/.' [ 116s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 116s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 116s] Making install in tests [ 116s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 116s] make[2]: Nothing to be done for 'install-exec-am'. [ 116s] make[2]: Nothing to be done for 'install-data-am'. [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 116s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 116s] Making install in examples [ 116s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 116s] make[2]: Nothing to be done for 'install-exec-am'. [ 116s] make[2]: Nothing to be done for 'install-data-am'. [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 116s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 116s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 116s] make[2]: Nothing to be done for 'install-exec-am'. [ 116s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/pkgconfig' [ 116s] /bin/install -c -m 644 sigc++-2.0.pc '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/pkgconfig' [ 117s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/sigc++-2.0/include' [ 117s] /bin/install -c -m 644 sigc++config.h '/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/sigc++-2.0/include' [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 117s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/info/dir [ 117s] + xargs rm -f -- [ 117s] + find /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm -regex '.*\.la$' [ 117s] + xargs rm -f -- [ 117s] + find /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm -regex '.*\.a$' [ 117s] + find /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm -type f -name '*.la' -delete -print [ 117s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 2.10.7-4.1 --unique-debug-src-base libsigc++-2.10.7-4.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libsigc++-2.10.7 [ 117s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/lib/libsigc-2.0.so.0.0.0 [ 117s] 242 blocks [ 117s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/libsigc++-debuginfo.manifest [ 117s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/libsigc++-debugsource.manifest [ 117s] + /usr/lib/rpm/check-buildroot [ 117s] + /usr/lib/rpm//brp-compress [ 117s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 118s] + /usr/lib/rpm/brp-python-hardlink [ 118s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm [ 118s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Hl20nk [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd libsigc++-2.10.7 [ 118s] + export MALLOC_CHECK_=2 MALLOC_PERTURB_=230 [ 118s] + MALLOC_CHECK_=2 [ 118s] + MALLOC_PERTURB_=230 [ 118s] + make -j4 check [ 118s] Making check in sigc++ [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 118s] make check-am [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 118s] make[2]: Nothing to be done for 'check-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/sigc++' [ 118s] Making check in tests [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 118s] make test_accum_iter test_accumulated test_bind test_bind_as_slot test_bind_ref test_bind_refptr test_bind_return test_compose test_copy_invalid_slot test_cpp11_lambda test_custom test_deduce_result_type test_disconnect test_disconnect_during_emit test_exception_catch test_functor_trait test_hide test_limit_reference test_mem_fun test_ptr_fun test_retype test_retype_return test_signal test_signal_move test_size test_slot test_slot_disconnect test_slot_move test_trackable test_trackable_move test_track_obj test_visit_each [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 118s] CXX testutilities.o [ 118s] CXX test_accum_iter.o [ 118s] CXX test_accumulated.o [ 118s] CXX test_bind.o [ 119s] CXX test_bind_as_slot.o [ 119s] CXX test_bind_ref.o [ 119s] CXX test_bind_refptr.o [ 119s] CXX test_bind_return.o [ 119s] CXX test_compose.o [ 120s] CXX test_copy_invalid_slot.o [ 120s] CXX test_cpp11_lambda.o [ 120s] CXX test_custom.o [ 120s] CXX test_deduce_result_type.o [ 120s] CXX test_disconnect.o [ 120s] CXX test_disconnect_during_emit.o [ 120s] CXX test_exception_catch.o [ 121s] CXX test_functor_trait.o [ 121s] CXX test_hide.o [ 121s] CXX test_limit_reference.o [ 121s] CXX test_mem_fun.o [ 121s] CXX test_ptr_fun.o [ 122s] CXX test_retype.o [ 122s] CXX test_retype_return.o [ 122s] CXX test_signal.o [ 122s] CXX test_signal_move.o [ 123s] CXX test_size.o [ 123s] CXX test_slot.o [ 123s] CXX test_slot_disconnect.o [ 123s] CXX test_slot_move.o [ 123s] CXX test_trackable.o [ 123s] CXX test_trackable_move.o [ 123s] CXX test_track_obj.o [ 124s] CXX test_visit_each.o [ 124s] CXXLD test_accum_iter [ 124s] CXXLD test_accumulated [ 124s] CXXLD test_bind [ 124s] CXXLD test_bind_as_slot [ 125s] CXXLD test_bind_ref [ 125s] CXXLD test_bind_refptr [ 126s] CXXLD test_bind_return [ 126s] CXXLD test_compose [ 126s] CXXLD test_copy_invalid_slot [ 126s] CXXLD test_cpp11_lambda [ 127s] CXXLD test_custom [ 127s] CXXLD test_deduce_result_type [ 127s] CXXLD test_disconnect [ 127s] CXXLD test_disconnect_during_emit [ 128s] CXXLD test_exception_catch [ 128s] CXXLD test_functor_trait [ 128s] CXXLD test_hide [ 128s] CXXLD test_limit_reference [ 129s] CXXLD test_mem_fun [ 129s] CXXLD test_ptr_fun [ 130s] CXXLD test_retype [ 130s] CXXLD test_retype_return [ 130s] CXXLD test_signal [ 130s] CXXLD test_signal_move [ 131s] CXXLD test_size [ 131s] CXXLD test_slot [ 131s] CXXLD test_slot_disconnect [ 132s] CXXLD test_slot_move [ 132s] CXXLD test_trackable [ 132s] CXXLD test_trackable_move [ 133s] CXXLD test_track_obj [ 133s] CXXLD test_visit_each [ 134s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 134s] make check-TESTS [ 134s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 134s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 134s] PASS: test_bind [ 134s] PASS: test_accumulated [ 134s] PASS: test_accum_iter [ 134s] PASS: test_bind_as_slot [ 135s] PASS: test_bind_return [ 135s] PASS: test_bind_ref [ 135s] PASS: test_bind_refptr [ 135s] PASS: test_compose [ 135s] PASS: test_deduce_result_type [ 135s] PASS: test_copy_invalid_slot [ 135s] PASS: test_cpp11_lambda [ 135s] PASS: test_custom [ 136s] PASS: test_disconnect_during_emit [ 136s] PASS: test_disconnect [ 136s] PASS: test_functor_trait [ 136s] PASS: test_exception_catch [ 136s] PASS: test_hide [ 136s] PASS: test_limit_reference [ 136s] PASS: test_ptr_fun [ 136s] PASS: test_mem_fun [ 136s] PASS: test_retype [ 136s] PASS: test_retype_return [ 136s] PASS: test_signal [ 136s] PASS: test_signal_move [ 137s] PASS: test_slot [ 137s] PASS: test_size [ 137s] PASS: test_slot_disconnect [ 137s] PASS: test_slot_move [ 137s] PASS: test_trackable [ 137s] PASS: test_trackable_move [ 137s] PASS: test_track_obj [ 137s] PASS: test_visit_each [ 138s] ============================================================================ [ 138s] Testsuite summary for libsigc++ 2.10.7 [ 138s] ============================================================================ [ 138s] # TOTAL: 32 [ 138s] # PASS: 32 [ 138s] # SKIP: 0 [ 138s] # XFAIL: 0 [ 138s] # FAIL: 0 [ 138s] # XPASS: 0 [ 138s] # ERROR: 0 [ 138s] ============================================================================ [ 138s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 138s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 138s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/tests' [ 138s] Making check in examples [ 138s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 138s] make[1]: Nothing to be done for 'check'. [ 138s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7/examples' [ 138s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 138s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsigc++-2.10.7' [ 138s] + unset MALLOC_CHECK_ MALLOC_PERTURB_ [ 138s] + exit 0 [ 138s] Processing files: libsigc++-2.10.7-4.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.tif8ej [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd libsigc++-2.10.7 [ 138s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/doc/packages/libsigc++ [ 138s] + export LC_ALL=C [ 138s] + LC_ALL=C [ 138s] + export DOCDIR [ 138s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/doc/packages/libsigc++ [ 138s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/doc/packages/libsigc++ [ 138s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/doc/packages/libsigc++ [ 138s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/doc/packages/libsigc++ [ 138s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/doc/packages/libsigc++ [ 138s] + exit 0 [ 138s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.rOBFqj [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd libsigc++-2.10.7 [ 138s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/licenses/libsigc++ [ 138s] + export LC_ALL=C [ 138s] + LC_ALL=C [ 138s] + export LICENSEDIR [ 138s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/licenses/libsigc++ [ 138s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/licenses/libsigc++ [ 138s] + exit 0 [ 138s] Provides: libsigc++ = 2.10.7-4.1 libsigc++(armv7hl-32) = 2.10.7-4.1 libsigc-2.0.so.0 [ 138s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Requires(post): /sbin/ldconfig [ 138s] Requires(postun): /sbin/ldconfig [ 138s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libsigc-2.0.so.0 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.15) rtld(GNU_HASH) [ 138s] Processing files: libsigc++-debugsource-2.10.7-4.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Provides: libsigc++-debugsource = 2.10.7-4.1 libsigc++-debugsource(armv7hl-32) = 2.10.7-4.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Processing files: libsigc++-devel-2.10.7-4.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.0LBd2k [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd libsigc++-2.10.7 [ 138s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/licenses/libsigc++-devel [ 138s] + export LC_ALL=C [ 138s] + LC_ALL=C [ 138s] + export LICENSEDIR [ 138s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/licenses/libsigc++-devel [ 138s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm/usr/share/licenses/libsigc++-devel [ 138s] + exit 0 [ 139s] Provides: libsigc++-devel = 2.10.7-4.1 libsigc++-devel(armv7hl-32) = 2.10.7-4.1 pkgconfig(sigc++-2.0) = 2.10.7 [ 139s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 139s] Requires: /usr/bin/pkg-config libsigc-2.0.so.0 [ 139s] Processing files: libsigc++-debuginfo-2.10.7-4.1.armv7hl [ 139s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 139s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 139s] [ 139s] Provides: libsigc++-debuginfo = 2.10.7-4.1 libsigc++-debuginfo(armv7hl-32) = 2.10.7-4.1 [ 139s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 139s] Recommends: libsigc++-debugsource(armv7hl-32) = 2.10.7-4.1 [ 139s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm [ 139s] Wrote: /home/abuild/rpmbuild/SRPMS/libsigc++-2.10.7-4.1.src.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-2.10.7-4.1.armv7hl.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-debugsource-2.10.7-4.1.armv7hl.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-devel-2.10.7-4.1.armv7hl.rpm [ 140s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-debuginfo-2.10.7-4.1.armv7hl.rpm [ 140s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.drFJEi [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd libsigc++-2.10.7 [ 140s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libsigc++-2.10.7-4.1.arm [ 140s] + exit 0 [ 140s] ... checking for files with abuild user/group [ 140s] ... creating baselibs [ 140s] ... comparing built packages with the former built [ 140s] /usr/lib/build/pkg-diff.sh [ 141s] compare /.build.oldpackages/libsigc++-2.9.3-3.4.src.rpm /home/abuild/rpmbuild/SRPMS/libsigc++-2.10.7-4.1.src.rpm [ 141s] This is not a prerelease project. Compare the project name. [ 141s] comparing rpmtags [ 141s] comparing RELEASE [ 141s] comparing PROVIDES [ 141s] comparing scripts [ 141s] comparing filelist [ 141s] comparing file checksum [ 141s] RPM meta information is identical [ 141s] compare /.build.oldpackages/libsigc++-2.9.3-3.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-2.10.7-4.1.armv7hl.rpm [ 141s] Comparing libsigc++-2.9.3-3.4.armv7hl.rpm to libsigc++-2.10.7-4.1.armv7hl.rpm [ 141s] This is not a prerelease project. Compare the project name. [ 141s] comparing rpmtags [ 141s] --- /tmp/tmp.BpYb118965/tmp.TBSe118999 2022-01-12 06:21:08.858400294 +0000 [ 141s] +++ /tmp/tmp.BpYb118965/tmp.auQI119005 2022-01-12 06:21:08.866399991 +0000 [ 141s] @@ -1,4 +1,4 @@ [ 141s] -libsigc++ 2.9.3 (none) [ 141s] +libsigc++ 2.10.7 (none) [ 141s] Typesafe Signal Framework for C++ [ 141s] This library implements a full callback system for use in widget [ 141s] libraries, abstract interfaces, and general programming. It is the most [ 141s] @@ -8,9 +8,9 @@ [ 141s] of use unmatched by other C++ callback libraries. [ 141s] tizen [ 141s] LGPL-2.1+ LGPL-2.1+ [ 141s] - Development/Libraries/C and C++ http://libsigc.sourceforge.net/ (none) (none) (none) [ 141s] + Development/Libraries/C and C++ https://github.com/libsigcplusplus/libsigcplusplus (none) (none) (none) [ 141s] (none) 4.14.1 armv7hl-tizen-linux [ 141s] cpio xz 5T [ 141s] [ 141s] (none) (none) (none) [ 141s] -obs://build.tizen.org/Tizen:Base/standard/a9aa36bf3c484289065142aa7d93a1bd-libsigc++ Tizen:Base [ 141s] +obs://build.tizen.org/Tizen:Base/standard/e4b0995d71d735d00c1d3861cbd75d29-libsigc++ Tizen:Base [ 141s] RPM meta information is different [ 141s] compare /.build.oldpackages/libsigc++-debuginfo-2.9.3-3.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-debuginfo-2.10.7-4.1.armv7hl.rpm [ 141s] skipping -debuginfo package [ 141s] compare /.build.oldpackages/libsigc++-debugsource-2.9.3-3.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-debugsource-2.10.7-4.1.armv7hl.rpm [ 142s] Comparing libsigc++-debugsource-2.9.3-3.4.armv7hl.rpm to libsigc++-debugsource-2.10.7-4.1.armv7hl.rpm [ 142s] This is not a prerelease project. Compare the project name. [ 142s] comparing rpmtags [ 142s] --- /tmp/tmp.xreL119121/tmp.aNPB119160 2022-01-12 06:21:09.254385321 +0000 [ 142s] +++ /tmp/tmp.xreL119121/tmp.TdOA119163 2022-01-12 06:21:09.270384716 +0000 [ 142s] @@ -1,13 +1,13 @@ [ 142s] -libsigc++-debugsource 2.9.3 (none) [ 142s] +libsigc++-debugsource 2.10.7 (none) [ 142s] Debug sources for package libsigc++ [ 142s] This package provides debug sources for package libsigc++. [ 142s] Debug sources are useful when developing applications that use this [ 142s] package or when debugging this package. [ 142s] tizen [ 142s] LGPL-2.1+ LGPL-2.1+ [ 142s] - Development/Debug http://libsigc.sourceforge.net/ (none) (none) (none) [ 142s] + Development/Debug https://github.com/libsigcplusplus/libsigcplusplus (none) (none) (none) [ 142s] (none) 4.14.1 armv7hl-tizen-linux [ 142s] cpio xz 5T [ 142s] [ 142s] (none) (none) (none) [ 142s] -obs://build.tizen.org/Tizen:Base/standard/a9aa36bf3c484289065142aa7d93a1bd-libsigc++ Tizen:Base [ 142s] +obs://build.tizen.org/Tizen:Base/standard/e4b0995d71d735d00c1d3861cbd75d29-libsigc++ Tizen:Base [ 142s] RPM meta information is different [ 142s] compare /.build.oldpackages/libsigc++-devel-2.9.3-3.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libsigc++-devel-2.10.7-4.1.armv7hl.rpm [ 142s] Comparing libsigc++-devel-2.9.3-3.4.armv7hl.rpm to libsigc++-devel-2.10.7-4.1.armv7hl.rpm [ 142s] This is not a prerelease project. Compare the project name. [ 142s] comparing rpmtags [ 142s] --- /tmp/tmp.GPUk119212/tmp.lvlR119277 2022-01-12 06:21:09.658370047 +0000 [ 142s] +++ /tmp/tmp.GPUk119212/tmp.byBh119293 2022-01-12 06:21:09.666369745 +0000 [ 142s] @@ -1,4 +1,4 @@ [ 142s] -libsigc++-devel 2.9.3 (none) [ 142s] +libsigc++-devel 2.10.7 (none) [ 142s] Typesafe Signal Framework for C++ [ 142s] This library implements a full callback system for use in widget [ 142s] libraries, abstract interfaces, and general programming. It is the most [ 142s] @@ -8,9 +8,9 @@ [ 142s] of use unmatched by other C++ callback libraries. [ 142s] tizen [ 142s] LGPL-2.1+ LGPL-2.1+ [ 142s] - Development/Libraries/C and C++ http://libsigc.sourceforge.net/ (none) (none) (none) [ 142s] + Development/Libraries/C and C++ https://github.com/libsigcplusplus/libsigcplusplus (none) (none) (none) [ 142s] (none) 4.14.1 armv7hl-tizen-linux [ 142s] cpio xz 5T [ 142s] [ 142s] (none) (none) (none) [ 142s] -obs://build.tizen.org/Tizen:Base/standard/a9aa36bf3c484289065142aa7d93a1bd-libsigc++ Tizen:Base [ 142s] +obs://build.tizen.org/Tizen:Base/standard/e4b0995d71d735d00c1d3861cbd75d29-libsigc++ Tizen:Base [ 142s] RPM meta information is different [ 142s] [ 142s] obsnw10 finished "build libsigc++.spec" at Wed Jan 12 06:21:09 UTC 2022. [ 142s] Retried build at Thu Jan 13 08:02:02 2022 returned same result, skipped Retried build at Mon Jan 17 23:50:39 2022 returned same result, skipped Retried build at Mon Jan 24 18:05:38 2022 returned same result, skipped Retried build at Fri Jan 28 13:44:41 2022 returned same result, skipped Retried build at Wed Feb 23 17:56:32 2022 returned same result, skipped Retried build at Thu Mar 3 02:22:13 2022 returned same result, skipped Retried build at Thu Mar 10 07:11:51 2022 returned same result, skipped Retried build at Tue Mar 22 09:43:11 2022 returned same result, skipped Retried build at Wed Apr 6 02:13:53 2022 returned same result, skipped Retried build at Sat Apr 9 15:33:02 2022 returned same result, skipped Retried build at Tue Apr 19 07:35:06 2022 returned same result, skipped Retried build at Tue May 17 07:01:30 2022 returned same result, skipped