[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw23 started "build _service:gbs:opus.spec" at Sat Dec 4 14:15:43 UTC 2021. [ 0s] [ 0s] Building opus for project 'Tizen:Base' repository 'standard' arch 'armv7hl' srcmd5 'a54f99e0e5ab60387e1c14f6e50f4014' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:opus.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:opus.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:opus.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling libzstd1... [ 2s] [8/41] preinstalling bash... [ 2s] [9/41] preinstalling diffutils... [ 2s] [10/41] preinstalling grep... [ 2s] [11/41] preinstalling libattr... [ 2s] [12/41] preinstalling libblkid... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 2s] [16/41] preinstalling liblua... [ 2s] [17/41] preinstalling liblzma... [ 2s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libsqlite... [ 2s] [22/41] preinstalling libuuid... [ 2s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [28/41] preinstalling coreutils... [ 9s] [29/41] preinstalling libacl... [ 9s] [30/41] preinstalling libelf... [ 9s] [31/41] preinstalling libmount... [ 9s] [32/41] preinstalling smack... [ 9s] [33/41] preinstalling bzip2... [ 9s] [34/41] preinstalling libmagic... [ 9s] [35/41] preinstalling libxml2... [ 9s] [36/41] preinstalling tar... [ 9s] [37/41] preinstalling util-linux... [ 9s] [38/41] preinstalling util-linux-su... [ 9s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-armv7hl postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] reordering...cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 11s] [1/96] installing libmagic-data-5.39-1.214 [ 11s] [2/96] installing setup-0.9-1.10 [ 11s] [3/96] installing filesystem-3.1-1.1 [ 11s] [4/96] installing glibc-2.30-1.105 [ 12s] [5/96] installing libatomic-9.2.0-1.34 [ 13s] [6/96] installing libgcc-9.2.0-1.34 [ 13s] [7/96] installing libzstd1-1.4.5-1.211 [ 13s] [8/96] installing bash-3.2.57-1.4 [ 13s] [9/96] installing cpio-2.8-1.2 [ 13s] [10/96] installing diffutils-3.3-1.2 [ 14s] [11/96] installing findutils-4.3.8-1.333 [ 14s] [12/96] installing gdbm-1.8.3-1.364 [ 14s] [13/96] installing hostname-3.23-1.2 [ 14s] [14/96] installing libattr-2.4.48-1.327 [ 14s] [15/96] installing libblkid-2.36-1.12 [ 15s] [16/96] installing libbz2-1.0.8-1.351 [ 15s] [17/96] installing libcap-2.24-1.357 [ 15s] [18/96] installing libext2fs-1.46.0-1.14 [ 16s] [19/96] installing libfreebl3-3.34.1-1.209 [ 16s] [20/96] installing libgfortran-9.2.0-1.34 [ 17s] [21/96] installing libgomp-9.2.0-1.34 [ 17s] [22/96] installing libitm-9.2.0-1.34 [ 17s] [23/96] installing libltdl-2.4.2-1.287 [ 18s] [24/96] installing liblua-5.1.5-1.135 [ 18s] [25/96] installing liblzma-5.2.5-1.256 [ 18s] [26/96] installing libopenssl11-1.1.1k-1.115 [ 19s] [27/96] installing libpcre-8.44-1.9 [ 19s] [28/96] installing libpopt-1.16-1.360 [ 20s] [29/96] installing libsmack-1.3.1-1.328 [ 20s] [30/96] installing libsmartcols-2.36-1.12 [ 20s] [31/96] installing libsqlite-3.33.0-1.254 [ 21s] [32/96] installing libstdc++-9.2.0-1.34 [ 22s] [33/96] installing libuuid-2.36-1.12 [ 22s] [34/96] installing m4-1.4.17-1.2 [ 22s] [35/96] installing net-tools-2.0_20121208git-1.2 [ 22s] [36/96] installing nspr-4.12-1.339 [ 23s] [37/96] installing patch-2.7-1.345 [ 23s] [38/96] installing pkg-config-0.28-1.305 [ 23s] [39/96] installing sed-4.1c-1.2 [ 23s] [40/96] installing update-alternatives-1.20.5-1.2 [ 23s] [41/96] installing which-2.17-1.2 [ 23s] [42/96] installing zlib-1.2.11-1.355 [ 23s] [43/96] installing build-compare-2015.04.28-1.76 [ 23s] [44/96] installing libstdc++-devel-9.2.0-1.34 [ 24s] [45/96] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.6.1 [ 25s] [46/96] installing terminfo-base-full-6.2-1.202 [ 26s] [47/96] installing cpp-9.2.0-1.34 [ 26s] [48/96] installing gcc-c++-9.2.0-1.34 [ 27s] [49/96] installing binutils-2.33.1-1.59 [ 28s] [50/96] installing coreutils-6.9-1.43 [ 28s] [51/96] installing gawk-3.1.5-1.2 [ 28s] [52/96] installing grep-2.5.2-1.2 [ 28s] [53/96] installing libacl-2.2.53-1.329 [ 29s] [54/96] installing libcc1-9.2.0-1.34 [ 29s] [55/96] installing libelf-0.178-1.158 [ 29s] [56/96] installing libmount-2.36-1.12 [ 30s] [57/96] installing libubsan-9.2.0-1.34 [ 30s] [58/96] installing make-4.0-1.41 [ 30s] [59/96] installing nss-certs-3.34.1-1.209 [ 31s] [60/96] installing smack-1.3.1-1.328 [ 31s] [61/96] installing bzip2-1.0.8-1.351 [ 31s] [62/96] installing libfdisk-2.36-1.12 [ 31s] [63/96] installing libmagic-5.39-1.214 [ 31s] [64/96] installing libxml2-2.9.12-1.25 [ 32s] [65/96] installing perl-5.32.0-1.129 [ 34s] [66/96] installing xz-5.2.5-1.256 [ 34s] [67/96] installing build-mkbaselibs-20120927-1.1 [ 34s] [68/96] installing linux-glibc-devel-3.10-1.378 [ 35s] [69/96] installing autoconf-2.69-1.150 [ 35s] [70/96] installing file-5.39-1.214 [ 35s] [71/96] installing glibc-locale-2.30-1.105 [ 36s] [72/96] installing tar-1.17-1.2 [ 36s] [73/96] installing gzip-1.3.12-1.360 [ 36s] [74/96] installing libncurses6-6.2-1.202 [ 37s] [75/96] installing pam-1.1.6-1.2 [ 37s] [76/96] installing tzdata-2020a-1.1 [ 38s] [77/96] installing libdw-0.178-1.158 [ 39s] [78/96] installing libarchive-3.5.1-1.151 [ 39s] [79/96] installing gcc-9.2.0-1.34 [ 40s] [80/96] installing libncurses-6.2-1.202 [ 40s] [81/96] installing glibc-devel-2.30-1.105 [ 41s] [82/96] installing qemu-accel-x86_64-armv7hl-0.4-9.1 [ 48s] [83/96] installing automake-1.15.1-1.213 [ 48s] [84/96] installing less-466-1.2 [ 48s] [85/96] installing libreadline-5.2-1.117 [ 49s] [86/96] installing procps-ng-3.3.16-1.2 [ 49s] [87/96] installing libasm-0.178-1.158 [ 49s] [88/96] installing build-20120927-1.1 [ 49s] [89/96] installing libtool-2.4.2-1.287 [ 49s] [90/96] installing elfutils-0.178-1.158 [ 50s] [91/96] installing util-linux-2.36-1.12 [ 50s] [92/96] installing util-linux-su-2.36-1.12 [ 50s] [93/96] installing nss-3.34.1-1.209 [ 50s] [94/96] installing libsoftokn3-3.34.1-1.209 [ 51s] [95/96] installing rpm-4.14.1.1-1.144 [ 51s] [96/96] installing rpm-build-4.14.1.1-1.144 [ 51s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 51s] now finalizing build dir... [ 52s] Running build time source services... [ 52s] Warning: spec file parser line 11: can't expand %(...) [ 52s] build target is armv7hl-tizen-linux [ 52s] ----------------------------------------------------------------- [ 52s] I have the following modifications for opus.spec: [ 52s] 4c4 [ 52s] < Release: 2 [ 52s] --- [ 52s] > Release: 1.1 [ 52s] ----------------------------------------------------------------- [ 52s] ----- building opus.spec (user abuild) [ 52s] ----------------------------------------------------------------- [ 52s] ----------------------------------------------------------------- [ 53s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/a54f99e0e5ab60387e1c14f6e50f4014-opus' -ba /home/abuild/rpmbuild/SOURCES/opus.spec [ 53s] Building target platforms: armv7hl-tizen-linux [ 53s] Building for target armv7hl-tizen-linux [ 53s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ddZpkX [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + rm -rf opus-1.3.1 [ 53s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/opus-1.3.1.tar.gz [ 53s] + /bin/tar -xof - [ 53s] + STATUS=0 [ 53s] + '[' 0 -ne 0 ']' [ 53s] + cd opus-1.3.1 [ 53s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 53s] + cp /home/abuild/rpmbuild/SOURCES/opus.manifest . [ 53s] + exit 0 [ 53s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.WGJIB0 [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd opus-1.3.1 [ 53s] ++ uname -m [ 53s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 53s] + export CFLAGS [ 53s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 53s] + export CXXFLAGS [ 53s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 53s] + export FFLAGS [ 53s] + LDFLAGS= [ 53s] + export LDFLAGS [ 53s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 53s] + export CFLAGS [ 53s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 53s] + export CXXFLAGS [ 53s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 53s] + export FFLAGS [ 53s] + ./configure --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-custom-modes --disable-static [ 54s] checking whether make supports nested variables... yes [ 54s] checking for a BSD-compatible install... /bin/install -c [ 54s] checking whether build environment is sane... yes [ 54s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 54s] checking for gawk... gawk [ 54s] checking whether make sets $(MAKE)... yes [ 54s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 54s] checking build system type... armv7hl-tizen-linux-gnueabihf [ 55s] checking host system type... armv7hl-tizen-linux-gnueabihf [ 55s] checking how to print strings... printf [ 55s] checking for style of include used by make... GNU [ 55s] checking for armv7hl-tizen-linux-gnueabihf-gcc... armv7hl-tizen-linux-gnueabihf-gcc [ 55s] checking whether the C compiler works... yes [ 55s] checking for C compiler default output file name... a.out [ 55s] checking for suffix of executables... [ 55s] checking whether we are cross compiling... no [ 55s] checking for suffix of object files... o [ 55s] checking whether we are using the GNU C compiler... yes [ 55s] checking whether armv7hl-tizen-linux-gnueabihf-gcc accepts -g... yes [ 55s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to accept ISO C89... none needed [ 55s] checking whether armv7hl-tizen-linux-gnueabihf-gcc understands -c and -o together... yes [ 55s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 55s] checking for a sed that does not truncate output... /bin/sed [ 55s] checking for grep that handles long lines and -e... /bin/grep [ 55s] checking for egrep... /bin/grep -E [ 55s] checking for fgrep... /bin/grep -F [ 55s] checking for ld used by armv7hl-tizen-linux-gnueabihf-gcc... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 55s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 55s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 55s] checking the name lister (/bin/nm -B) interface... BSD nm [ 55s] checking whether ln -s works... yes [ 55s] checking the maximum length of command line arguments... 1572864 [ 56s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to armv7hl-tizen-linux-gnueabihf format... func_convert_file_noop [ 56s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to toolchain format... func_convert_file_noop [ 56s] checking for /usr/armv7hl-tizen-linux-gnueabihf/bin/ld option to reload object files... -r [ 56s] checking for armv7hl-tizen-linux-gnueabihf-objdump... no [ 56s] checking for objdump... objdump [ 56s] checking how to recognize dependent libraries... pass_all [ 56s] checking for armv7hl-tizen-linux-gnueabihf-dlltool... no [ 56s] checking for dlltool... no [ 56s] checking how to associate runtime and link libraries... printf %s\n [ 56s] checking for armv7hl-tizen-linux-gnueabihf-ar... no [ 56s] checking for ar... ar [ 56s] checking for archiver @FILE support... @ [ 56s] checking for armv7hl-tizen-linux-gnueabihf-strip... no [ 56s] checking for strip... strip [ 56s] checking for armv7hl-tizen-linux-gnueabihf-ranlib... no [ 56s] checking for ranlib... ranlib [ 56s] checking command to parse /bin/nm -B output from armv7hl-tizen-linux-gnueabihf-gcc object... ok [ 56s] checking for sysroot... no [ 56s] checking for a working dd... /bin/dd [ 56s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 56s] checking for armv7hl-tizen-linux-gnueabihf-mt... no [ 56s] checking for mt... no [ 56s] checking if : is a manifest tool... no [ 56s] checking how to run the C preprocessor... armv7hl-tizen-linux-gnueabihf-gcc -E [ 56s] checking for ANSI C header files... yes [ 56s] checking for sys/types.h... yes [ 56s] checking for sys/stat.h... yes [ 56s] checking for stdlib.h... yes [ 56s] checking for string.h... yes [ 57s] checking for memory.h... yes [ 57s] checking for strings.h... yes [ 57s] checking for inttypes.h... yes [ 57s] checking for stdint.h... yes [ 57s] checking for unistd.h... yes [ 57s] checking for dlfcn.h... yes [ 57s] checking for objdir... .libs [ 57s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no [ 57s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC [ 57s] checking if armv7hl-tizen-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes [ 57s] checking if armv7hl-tizen-linux-gnueabihf-gcc static flag -static works... no [ 57s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... yes [ 57s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes [ 57s] checking whether the armv7hl-tizen-linux-gnueabihf-gcc linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 57s] checking whether -lc should be explicitly linked in... no [ 58s] checking dynamic linker characteristics... GNU/Linux ld.so [ 58s] checking how to hardcode library paths into programs... immediate [ 58s] checking whether stripping libraries is possible... yes [ 58s] checking if libtool supports shared libraries... yes [ 58s] checking whether to build shared libraries... yes [ 58s] checking whether to build static libraries... no [ 58s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to accept ISO C99... none needed [ 58s] checking for an ANSI C-conforming const... yes [ 58s] checking for inline... inline [ 58s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 58s] checking for C/C++ restrict keyword... __restrict [ 58s] checking for C99 variable-size arrays... yes [ 58s] checking for cos in -lm... yes [ 58s] checking if compiler supports ARM Neon intrinsics... yes [ 58s] checking for NE10... no [ 58s] checking if compiler supports Aarch64 Neon intrinsics... no [ 59s] checking if compiler supports Aarch64 Neon intrinsics with -mfpu=neon... no [ 59s] checking for doxygen... no [ 59s] checking for dot... no [ 59s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fvisibility=hidden... yes [ 59s] checking whether to add -D_FORTIFY_SOURCE=2 to CFLAGS... no [ 59s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes... yes [ 59s] checking for lrintf... yes [ 59s] checking for lrint... yes [ 59s] checking for __malloc_hook... yes [ 59s] checking that generated files are newer than configure... done [ 59s] configure: creating ./config.status [ 61s] config.status: creating Makefile [ 61s] config.status: creating opus.pc [ 61s] config.status: creating opus-uninstalled.pc [ 61s] config.status: creating celt/arm/armopts.s [ 61s] config.status: creating doc/Makefile [ 61s] config.status: creating doc/Doxyfile [ 61s] config.status: creating config.h [ 62s] config.status: executing depfiles commands [ 66s] config.status: executing libtool commands [ 66s] configure: [ 66s] ------------------------------------------------------------------------ [ 66s] opus 1.3.1: Automatic configuration OK. [ 66s] [ 66s] Compiler support: [ 66s] [ 66s] C99 var arrays: ................ yes [ 66s] C99 lrintf: .................... yes [ 66s] Use alloca: .................... no (using var arrays) [ 66s] [ 66s] General configuration: [ 66s] [ 66s] Floating point support: ........ yes [ 66s] Fast float approximations: ..... no [ 66s] Fixed point debugging: ......... no [ 66s] Inline Assembly Optimizations: . No inline ASM for your platform, please send patches [ 66s] External Assembly Optimizations: [ 66s] Intrinsics Optimizations: ...... ARM (NEON) [ 66s] Run-time CPU detection: ........ no [ 66s] Custom modes: .................. yes [ 66s] Assertion checking: ............ no [ 66s] Hardening: ..................... yes [ 66s] Fuzzing: ....................... no [ 66s] Check ASM: ..................... no [ 66s] [ 66s] API documentation: ............. yes [ 66s] Extra programs: ................ yes [ 66s] ------------------------------------------------------------------------ [ 66s] [ 66s] Type "make; make install" to compile and install [ 66s] Type "make check" to run the test suite [ 66s] [ 67s] + make -j8 [ 67s] make all-recursive [ 67s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 67s] CC celt/opus_custom_demo.o [ 67s] CC celt/celt.lo [ 67s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 67s] make[3]: Nothing to be done for 'all'. [ 67s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 67s] CC celt/celt_encoder.lo [ 67s] CC celt/bands.lo [ 67s] CC celt/cwrs.lo [ 67s] CC celt/celt_decoder.lo [ 67s] CC celt/entcode.lo [ 67s] CC celt/entdec.lo [ 67s] CC celt/entenc.lo [ 69s] CC celt/kiss_fft.lo [ 69s] CC celt/laplace.lo [ 69s] CC celt/mathops.lo [ 69s] CC celt/mdct.lo [ 69s] CC celt/modes.lo [ 70s] CC celt/pitch.lo [ 70s] CC celt/celt_lpc.lo [ 70s] CC celt/quant_bands.lo [ 71s] CC celt/rate.lo [ 71s] CC celt/vq.lo [ 71s] CC celt/arm/armcpu.lo [ 71s] CC celt/arm/arm_celt_map.lo [ 72s] CC celt/arm/celt_neon_intr.lo [ 72s] CC celt/arm/pitch_neon_intr.lo [ 72s] CC silk/CNG.lo [ 73s] CC silk/code_signs.lo [ 73s] CC silk/init_decoder.lo [ 73s] CC silk/decode_core.lo [ 73s] CC silk/decode_frame.lo [ 73s] CC silk/decode_parameters.lo [ 74s] CC silk/decode_indices.lo [ 74s] CC silk/decode_pulses.lo [ 74s] CC silk/decoder_set_fs.lo [ 75s] CC silk/dec_API.lo [ 75s] CC silk/enc_API.lo [ 76s] CC silk/encode_indices.lo [ 76s] CC silk/encode_pulses.lo [ 76s] CC silk/gain_quant.lo [ 76s] CC silk/interpolate.lo [ 76s] CC silk/LP_variable_cutoff.lo [ 76s] CC silk/NLSF_decode.lo [ 77s] CC silk/NSQ.lo [ 78s] CC silk/NSQ_del_dec.lo [ 78s] CC silk/PLC.lo [ 78s] CC silk/shell_coder.lo [ 78s] CC silk/tables_gain.lo [ 78s] CC silk/tables_LTP.lo [ 78s] CC silk/tables_NLSF_CB_NB_MB.lo [ 79s] CC silk/tables_NLSF_CB_WB.lo [ 79s] CC silk/tables_other.lo [ 80s] CC silk/tables_pitch_lag.lo [ 80s] CC silk/tables_pulses_per_block.lo [ 80s] CC silk/VAD.lo [ 80s] CC silk/control_audio_bandwidth.lo [ 80s] CC silk/quant_LTP_gains.lo [ 80s] CC silk/VQ_WMat_EC.lo [ 81s] CC silk/HP_variable_cutoff.lo [ 81s] CC silk/NLSF_encode.lo [ 82s] CC silk/NLSF_VQ.lo [ 82s] CC silk/NLSF_unpack.lo [ 82s] CC silk/NLSF_del_dec_quant.lo [ 82s] CC silk/process_NLSFs.lo [ 82s] CC silk/stereo_LR_to_MS.lo [ 82s] CC silk/stereo_MS_to_LR.lo [ 83s] CC silk/check_control_input.lo [ 83s] CC silk/control_SNR.lo [ 84s] CC silk/init_encoder.lo [ 84s] CC silk/control_codec.lo [ 84s] CC silk/A2NLSF.lo [ 84s] CC silk/ana_filt_bank_1.lo [ 84s] CC silk/biquad_alt.lo [ 85s] CC silk/bwexpander_32.lo [ 85s] CC silk/bwexpander.lo [ 85s] CC silk/debug.lo [ 86s] CC silk/decode_pitch.lo [ 86s] CC silk/inner_prod_aligned.lo [ 86s] CC silk/lin2log.lo [ 86s] CC silk/log2lin.lo [ 86s] CC silk/LPC_analysis_filter.lo [ 87s] CC silk/LPC_inv_pred_gain.lo [ 87s] CC silk/table_LSF_cos.lo [ 87s] CC silk/NLSF2A.lo [ 88s] CC silk/NLSF_stabilize.lo [ 88s] CC silk/NLSF_VQ_weights_laroia.lo [ 88s] CC silk/pitch_est_tables.lo [ 88s] CC silk/resampler.lo [ 89s] CC silk/resampler_down2_3.lo [ 89s] CC silk/resampler_down2.lo [ 89s] CC silk/resampler_private_AR2.lo [ 90s] CC silk/resampler_private_down_FIR.lo [ 90s] CC silk/resampler_private_IIR_FIR.lo [ 90s] CC silk/resampler_private_up2_HQ.lo [ 90s] CC silk/resampler_rom.lo [ 90s] CC silk/sigm_Q15.lo [ 91s] CC silk/sort.lo [ 91s] CC silk/sum_sqr_shift.lo [ 91s] CC silk/stereo_decode_pred.lo [ 92s] CC silk/stereo_encode_pred.lo [ 92s] CC silk/stereo_find_predictor.lo [ 92s] CC silk/stereo_quant_pred.lo [ 92s] CC silk/LPC_fit.lo [ 93s] CC silk/float/apply_sine_window_FLP.lo [ 93s] CC silk/float/corrMatrix_FLP.lo [ 93s] CC silk/float/encode_frame_FLP.lo [ 93s] CC silk/float/find_LPC_FLP.lo [ 94s] CC silk/float/find_LTP_FLP.lo [ 94s] CC silk/float/find_pitch_lags_FLP.lo [ 94s] CC silk/float/find_pred_coefs_FLP.lo [ 94s] CC silk/float/LPC_analysis_filter_FLP.lo [ 95s] CC silk/float/LTP_analysis_filter_FLP.lo [ 95s] CC silk/float/LTP_scale_ctrl_FLP.lo [ 95s] CC silk/float/noise_shape_analysis_FLP.lo [ 95s] CC silk/float/process_gains_FLP.lo [ 96s] CC silk/float/regularize_correlations_FLP.lo [ 96s] CC silk/float/residual_energy_FLP.lo [ 96s] CC silk/float/warped_autocorrelation_FLP.lo [ 96s] CC silk/float/wrappers_FLP.lo [ 97s] CC silk/float/autocorrelation_FLP.lo [ 97s] CC silk/float/burg_modified_FLP.lo [ 97s] CC silk/float/bwexpander_FLP.lo [ 97s] CC silk/float/energy_FLP.lo [ 98s] CC silk/float/inner_product_FLP.lo [ 98s] CC silk/float/k2a_FLP.lo [ 98s] CC silk/float/LPC_inv_pred_gain_FLP.lo [ 99s] CC silk/float/pitch_analysis_core_FLP.lo [ 99s] CC silk/float/scale_copy_vector_FLP.lo [ 99s] CC silk/float/scale_vector_FLP.lo [ 99s] CC silk/float/schur_FLP.lo [ 99s] CC silk/float/sort_FLP.lo [ 100s] CC silk/arm/arm_silk_map.lo [ 100s] CC silk/arm/biquad_alt_neon_intr.lo [ 100s] CC silk/arm/LPC_inv_pred_gain_neon_intr.lo [ 101s] CC silk/arm/NSQ_del_dec_neon_intr.lo [ 101s] CC silk/arm/NSQ_neon.lo [ 101s] CC src/opus.lo [ 101s] CC src/opus_decoder.lo [ 101s] CC src/opus_encoder.lo [ 102s] CC src/opus_multistream.lo [ 102s] CC src/opus_multistream_encoder.lo [ 102s] CC src/opus_multistream_decoder.lo [ 103s] CC src/repacketizer.lo [ 103s] silk/arm/NSQ_del_dec_neon_intr.c: In function 'silk_NSQ_del_dec_neon': [ 103s] silk/arm/NSQ_del_dec_neon_intr.c:422:55: warning: iteration 80 invokes undefined behavior [-Waggressive-loop-optimizations] [ 103s] 422 | NSQ->sLPC_Q14[ i ] = psDelDec->sLPC_Q14[ i ][ Winner_ind ]; [ 103s] | ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 103s] silk/arm/NSQ_del_dec_neon_intr.c:421:9: note: within this loop [ 103s] 421 | for( ; i < NSQ_LPC_BUF_LENGTH; i++ ) { [ 103s] | ^~~ [ 103s] CC src/opus_projection_encoder.lo [ 104s] CC src/opus_projection_decoder.lo [ 104s] CC src/mapping_matrix.lo [ 104s] CC src/analysis.lo [ 104s] CC src/mlp.lo [ 105s] CC src/mlp_data.lo [ 105s] CC celt/tests/test_unit_cwrs32.o [ 105s] CC celt/tests/test_unit_dft.o [ 105s] CC celt/tests/test_unit_entropy.o [ 105s] CC celt/tests/test_unit_laplace.o [ 106s] CC celt/tests/test_unit_mathops.o [ 106s] CC celt/tests/test_unit_mdct.o [ 106s] CC celt/tests/test_unit_rotation.o [ 106s] CC celt/tests/test_unit_types.o [ 106s] CC src/opus_compare.o [ 106s] CC src/repacketizer_demo.o [ 106s] CC src/opus_demo.o [ 106s] CC tests/test_opus_api.o [ 106s] CC silk/tests/test_unit_LPC_inv_pred_gain.o [ 106s] CC tests/test_opus_decode.o [ 106s] CC tests/test_opus_encode.o [ 106s] CC tests/opus_encode_regressions.o [ 106s] CC tests/test_opus_padding.o [ 106s] CC tests/test_opus_projection.o [ 106s] CCLD celt/tests/test_unit_cwrs32 [ 106s] CCLD celt/tests/test_unit_dft [ 106s] CCLD celt/tests/test_unit_entropy [ 106s] CCLD celt/tests/test_unit_laplace [ 107s] CCLD celt/tests/test_unit_mdct [ 107s] CCLD celt/tests/test_unit_mathops [ 107s] CCLD celt/tests/test_unit_rotation [ 107s] CCLD celt/tests/test_unit_types [ 108s] CCLD opus_compare [ 108s] CCLD silk/tests/test_unit_LPC_inv_pred_gain [ 109s] CCLD tests/test_opus_projection [ 109s] CCLD libopus.la [ 125s] CCLD repacketizer_demo [ 125s] CCLD tests/test_opus_api [ 125s] CCLD tests/test_opus_decode [ 125s] CCLD tests/test_opus_encode [ 125s] CCLD opus_custom_demo [ 125s] CCLD opus_demo [ 125s] CCLD tests/test_opus_padding [ 127s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 127s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 127s] + exit 0 [ 127s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.itjilW [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd opus-1.3.1 [ 127s] + LANG=C [ 127s] + export LANG [ 127s] + unset DISPLAY [ 127s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 127s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 127s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 127s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 127s] make install-recursive [ 127s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 127s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 127s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 127s] make[3]: Nothing to be done for 'all'. [ 127s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 127s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 127s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib' [ 127s] /bin/sh ./libtool --mode=install /bin/install -c libopus.la '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib' [ 128s] libtool: install: /bin/install -c .libs/libopus.so.0.8.0 /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib/libopus.so.0.8.0 [ 128s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib && { ln -s -f libopus.so.0.8.0 libopus.so.0 || { rm -f libopus.so.0 && ln -s libopus.so.0.8.0 libopus.so.0; }; }) [ 128s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib && { ln -s -f libopus.so.0.8.0 libopus.so || { rm -f libopus.so && ln -s libopus.so.0.8.0 libopus.so; }; }) [ 128s] libtool: install: /bin/install -c .libs/libopus.lai /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib/libopus.la [ 128s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 128s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 128s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 128s] make[5]: Nothing to be done for 'install-exec-am'. [ 128s] make[5]: Nothing to be done for 'install-data-am'. [ 128s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 128s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1/doc' [ 128s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/share/aclocal' [ 128s] /bin/install -c -m 644 opus.m4 '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/share/aclocal' [ 128s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib/pkgconfig' [ 128s] /bin/install -c -m 644 opus.pc '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib/pkgconfig' [ 128s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/include/opus' [ 128s] /bin/install -c -m 644 include/opus.h include/opus_multistream.h include/opus_types.h include/opus_defines.h include/opus_projection.h include/opus_custom.h '/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/include/opus' [ 128s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 128s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 128s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/opus-1.3.1' [ 128s] + find /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm -type f -name '*.la' -delete [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/share/doc/opus/html [ 128s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1.3.1-1.1 --unique-debug-src-base opus-1.3.1-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/opus-1.3.1 [ 129s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/lib/libopus.so.0.8.0 [ 129s] 3951 blocks [ 129s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/opus-1.3.1/opus-debuginfo.manifest [ 129s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/opus-1.3.1/opus-debugsource.manifest [ 129s] + /usr/lib/rpm/check-buildroot [ 129s] + /usr/lib/rpm//brp-compress [ 129s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 130s] + /usr/lib/rpm/brp-python-hardlink [ 130s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 130s] Processing files: opus-1.3.1-1.1.armv7hl [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.CiiPxX [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd opus-1.3.1 [ 130s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/share/licenses/opus [ 130s] + export LC_ALL=C [ 130s] + LC_ALL=C [ 130s] + export LICENSEDIR [ 130s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/share/licenses/opus [ 130s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm/usr/share/licenses/opus [ 130s] + exit 0 [ 130s] Provides: libopus.so.0 opus = 1.3.1-1.1 opus(armv7hl-32) = 1.3.1-1.1 [ 130s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires(post): /sbin/ldconfig [ 130s] Requires(postun): /sbin/ldconfig [ 130s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.29) libm.so.6(GLIBC_2.4) rtld(GNU_HASH) [ 130s] Processing files: opus-debugsource-1.3.1-1.1.armv7hl [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Provides: opus-debugsource = 1.3.1-1.1 opus-debugsource(armv7hl-32) = 1.3.1-1.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Processing files: opus-devel-1.3.1-1.1.armv7hl [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Provides: opus-devel = 1.3.1-1.1 opus-devel(armv7hl-32) = 1.3.1-1.1 pkgconfig(opus) = 1.3.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires: /usr/bin/pkg-config libopus.so.0 [ 130s] Processing files: opus-debuginfo-1.3.1-1.1.armv7hl [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Provides: opus-debuginfo = 1.3.1-1.1 opus-debuginfo(armv7hl-32) = 1.3.1-1.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Recommends: opus-debugsource(armv7hl-32) = 1.3.1-1.1 [ 130s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 131s] Wrote: /home/abuild/rpmbuild/SRPMS/opus-1.3.1-1.1.src.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/opus-1.3.1-1.1.armv7hl.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/opus-debugsource-1.3.1-1.1.armv7hl.rpm [ 132s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/opus-devel-1.3.1-1.1.armv7hl.rpm [ 132s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/opus-debuginfo-1.3.1-1.1.armv7hl.rpm [ 132s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.S8Oi3V [ 132s] + umask 022 [ 132s] + cd /home/abuild/rpmbuild/BUILD [ 132s] + cd opus-1.3.1 [ 132s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 132s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/opus-1.3.1-1.1.arm [ 132s] + exit 0 [ 132s] ... checking for files with abuild user/group [ 132s] ... creating baselibs [ 133s] [ 133s] obspw23 finished "build opus.spec" at Sat Dec 4 14:17:56 UTC 2021. [ 133s] Retried build at Sat Dec 4 15:36:19 2021 returned same result, skipped Retried build at Wed Dec 8 10:46:39 2021 returned same result, skipped Retried build at Wed Dec 15 23:42:32 2021 returned same result, skipped Retried build at Sat Dec 18 04:47:10 2021 returned same result, skipped Retried build at Thu Dec 30 15:24:35 2021 returned same result, skipped Retried build at Fri Dec 31 22:27:18 2021 returned same result, skipped Retried build at Thu Jan 13 07:51:02 2022 returned same result, skipped Retried build at Mon Jan 24 17:52:45 2022 returned same result, skipped Retried build at Fri Jan 28 13:33:48 2022 returned same result, skipped Retried build at Wed Feb 23 17:44:47 2022 returned same result, skipped Retried build at Thu Mar 3 02:10:11 2022 returned same result, skipped Retried build at Thu Mar 10 06:58:28 2022 returned same result, skipped Retried build at Tue Mar 22 09:32:37 2022 returned same result, skipped Retried build at Sat Apr 9 15:19:50 2022 returned same result, skipped Retried build at Tue Apr 19 07:23:12 2022 returned same result, skipped Retried build at Tue May 17 06:50:12 2022 returned same result, skipped