[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw12 started "build _service:gbs:perl-PerlIO-gzip.spec" at Wed Feb 23 17:43:06 UTC 2022. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen:Base' repository 'standard' arch 'armv7hl' srcmd5 '2889c29a26b7b72cfc8d93a5a7a4a22c' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7hl postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/97] installing libmagic-data-5.41-6.269 [ 9s] [2/97] installing setup-0.9-6.2 [ 9s] [3/97] installing filesystem-3.1-4.1 [ 9s] [4/97] installing glibc-2.30-13.49 [ 10s] [5/97] installing libatomic-9.2.0-15.43 [ 10s] [6/97] installing libgcc-9.2.0-15.43 [ 11s] [7/97] installing bash-3.2.57-5.1 [ 11s] [8/97] installing cpio-2.8-5.3 [ 11s] [9/97] installing diffutils-3.3-4.3 [ 11s] [10/97] installing findutils-4.3.8-5.332 [ 11s] [11/97] installing gdbm-1.8.3-3.631 [ 11s] [12/97] installing hostname-3.23-3.3 [ 11s] [13/97] installing libattr-2.5.1-5.319 [ 11s] [14/97] installing libblkid-2.36-10.4 [ 12s] [15/97] installing libbz2-1.0.8-5.203 [ 12s] [16/97] installing libcap-2.24-4.316 [ 12s] [17/97] installing libext2fs-1.46.0-4.37 [ 13s] [18/97] installing libfreebl3-3.34.1-3.465 [ 13s] [19/97] installing libgfortran-9.2.0-15.43 [ 13s] [20/97] installing libgomp-9.2.0-15.43 [ 14s] [21/97] installing libitm-9.2.0-15.43 [ 14s] [22/97] installing libltdl-2.4.2-3.469 [ 14s] [23/97] installing liblua-5.1.5-3.322 [ 14s] [24/97] installing liblzma-5.2.5-5.259 [ 15s] [25/97] installing libopenssl11-1.1.1l-6.193 [ 15s] [26/97] installing libpcre-8.45-5.2 [ 15s] [27/97] installing libpopt-1.16-3.579 [ 16s] [28/97] installing libsmack-1.3.1-4.319 [ 16s] [29/97] installing libsmartcols-2.36-10.4 [ 16s] [30/97] installing libsqlite-3.33.0-4.495 [ 17s] [31/97] installing libstdc++-9.2.0-15.43 [ 17s] [32/97] installing libuuid-2.36-10.4 [ 17s] [33/97] installing libzstd1-1.4.5-2.168 [ 18s] [34/97] installing m4-1.4.19-4.1 [ 18s] [35/97] installing net-tools-2.0_20121208git-4.4 [ 18s] [36/97] installing nspr-4.12-3.583 [ 18s] [37/97] installing patch-2.7.6-7.73 [ 18s] [38/97] installing pkg-config-0.28-3.579 [ 18s] [39/97] installing sed-4.1c-4.2 [ 18s] [40/97] installing update-alternatives-1.20.5-3.4 [ 18s] [41/97] installing which-2.17-4.4 [ 18s] [42/97] installing zlib-1.2.11-3.609 [ 19s] [43/97] installing build-compare-2015.04.28-3.215 [ 19s] [44/97] installing libstdc++-devel-9.2.0-15.43 [ 19s] [45/97] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 20s] [46/97] installing terminfo-base-full-6.2-7.253 [ 21s] [47/97] installing cpp-9.2.0-15.43 [ 21s] [48/97] installing gcc-c++-9.2.0-15.43 [ 22s] [49/97] installing binutils-2.33.1-9.219 [ 23s] [50/97] installing coreutils-6.9-5.115 [ 23s] [51/97] installing gawk-3.1.5-4.4 [ 23s] [52/97] installing grep-2.5.2-3.4 [ 23s] [53/97] installing libacl-2.2.53-4.534 [ 23s] [54/97] installing libcc1-9.2.0-15.43 [ 23s] [55/97] installing libelf-0.178-4.41 [ 24s] [56/97] installing libmount-2.36-10.4 [ 24s] [57/97] installing libubsan-9.2.0-15.43 [ 24s] [58/97] installing make-4.0-2.133 [ 25s] [59/97] installing nss-certs-3.34.1-3.465 [ 25s] [60/97] installing smack-1.3.1-4.319 [ 25s] [61/97] installing bzip2-1.0.8-5.203 [ 25s] [62/97] installing libfdisk-2.36-10.4 [ 25s] [63/97] installing libmagic-5.41-6.269 [ 25s] [64/97] installing libxml2-2.9.12-7.142 [ 26s] [65/97] installing perl-5.34.0-7.1 [ 28s] [66/97] installing xz-5.2.5-5.259 [ 28s] [67/97] installing build-mkbaselibs-20120927-3.3 [ 28s] [68/97] installing linux-glibc-devel-3.10-4.435 [ 28s] [69/97] installing autoconf-2.69-5.83 [ 29s] [70/97] installing file-5.41-6.269 [ 29s] [71/97] installing glibc-locale-2.30-13.49 [ 30s] [72/97] installing tar-1.17-3.3 [ 30s] [73/97] installing gzip-1.3.12-3.583 [ 30s] [74/97] installing libncurses6-6.2-7.253 [ 30s] [75/97] installing pam-1.1.6-4.1 [ 30s] [76/97] installing tzdata-2021e-5.1 [ 31s] [77/97] installing libdw-0.178-4.41 [ 31s] [78/97] installing libarchive-3.5.2-3.76 [ 31s] [79/97] installing gcc-9.2.0-15.43 [ 32s] [80/97] installing libncurses-6.2-7.253 [ 32s] [81/97] installing glibc-devel-2.30-13.49 [ 32s] [82/97] installing qemu-accel-x86_64-armv7hl-0.4-9.15 [ 39s] [83/97] installing automake-1.15.1-5.76 [ 39s] [84/97] installing less-466-3.4 [ 40s] [85/97] installing libreadline-5.2-3.200 [ 40s] [86/97] installing procps-ng-3.3.17-4.1 [ 40s] [87/97] installing libasm-0.178-4.41 [ 40s] [88/97] installing build-20120927-3.3 [ 40s] [89/97] installing zlib-devel-1.2.11-3.609 [ 40s] [90/97] installing libtool-2.4.2-3.469 [ 40s] [91/97] installing elfutils-0.178-4.41 [ 40s] [92/97] installing util-linux-2.36-10.4 [ 41s] [93/97] installing util-linux-su-2.36-10.4 [ 41s] [94/97] installing nss-3.34.1-3.465 [ 41s] [95/97] installing libsoftokn3-3.34.1-3.465 [ 41s] [96/97] installing rpm-4.14.1.1-9.89 [ 42s] [97/97] installing rpm-build-4.14.1.1-9.89 [ 42s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 42s] Running build time source services... [ 43s] build target is armv7hl-tizen-linux [ 43s] ----------------------------------------------------------------- [ 43s] I have the following modifications for perl-PerlIO-gzip.spec: [ 43s] 4c4 [ 43s] < Release: 1 [ 43s] --- [ 43s] > Release: 1.9 [ 43s] ----------------------------------------------------------------- [ 43s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 43s] ----------------------------------------------------------------- [ 43s] ----------------------------------------------------------------- [ 43s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/2889c29a26b7b72cfc8d93a5a7a4a22c-perl-PerlIO-gzip' -ba /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 46s] Building target platforms: armv7hl-tizen-linux [ 46s] Building for target armv7hl-tizen-linux [ 46s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OMoIHG [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + rm -rf perl-PerlIO-gzip-0.18 [ 46s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.18.tar.gz [ 46s] + /bin/tar -xof - [ 46s] + STATUS=0 [ 46s] + '[' 0 -ne 0 ']' [ 46s] + cd perl-PerlIO-gzip-0.18 [ 46s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 46s] + echo 'Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):' [ 46s] Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch): [ 46s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 46s] patching file Makefile.PL [ 46s] + exit 0 [ 46s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.137SLG [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd perl-PerlIO-gzip-0.18 [ 46s] ++ uname -m [ 46s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + LDFLAGS= [ 46s] + export LDFLAGS [ 46s] + perl Makefile.PL [ 47s] Checking if your kit is complete... [ 47s] Looks good [ 48s] Generating a Unix-style Makefile [ 48s] Writing Makefile for PerlIO::gzip [ 48s] Writing MYMETA.yml and MYMETA.json [ 48s] + make [ 51s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 51s] Running Mkbootstrap for gzip () [ 51s] chmod 644 "gzip.bs" [ 51s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 51s] "/usr/bin/perl" "/usr/lib/perl5/5.34.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.34.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 52s] mv gzip.xsc gzip.c [ 52s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -fPIC "-I/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE" gzip.c [ 52s] gzip.xs: In function 'PerlIOGzip_popped': [ 52s] gzip.xs:870:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'IV' {aka 'long int'} [-Wformat=] [ 52s] 870 | PerlIO_debug("PerlIOGzip_popped code=%d\n", code); [ 52s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ [ 52s] | | [ 52s] | IV {aka long int} [ 52s] In file included from /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/perl.h:5744, [ 52s] from gzip.xs:13: [ 52s] gzip.xs: In function 'PerlIOGzip_getarg': [ 52s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/embed.h:384:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 52s] 384 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 52s] | ^~~~~~~~~~~~ [ 52s] gzip.xs:675:24: note: 'mode' was declared here [ 52s] 675 | register const char *mode; [ 52s] | ^~~~ [ 52s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 52s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 52s] -lz \ [ 52s] [ 52s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 53s] Manifying 1 pod document [ 53s] + exit 0 [ 53s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.FcCJBG [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd perl-PerlIO-gzip-0.18 [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 53s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 53s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm install_vendor [ 53s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 54s] Manifying 1 pod document [ 55s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/man/man3/PerlIO::gzip.3 [ 55s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/info [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/doc/packages [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/doc/perl-PerlIO-gzip [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/doc/perl-PerlIO-gzip-0.18 [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/gtk-doc [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/doc [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/man [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm -regex '.*/man/man./.*.[0-9]' [ 55s] + xargs rm -f -- [ 55s] + xargs rm -f -- [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm -regex '.*/man/../man./.*.[0-9]' [ 55s] + xargs rm -f -- [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm -regex '.*/man/man./.*.[0-9]pm' [ 55s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 55s] + xargs -0 -r rm [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 55s] + '[' armv7hl == noarch ']' [ 55s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 55s] + FILES=perl-PerlIO-gzip.files [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0 -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ [ 55s] ++ sort [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ -type d [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] + continue [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/PerlIO [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/auto [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 55s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 55s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO [ 55s] + /bin/cat [ 55s] + for file in '$RES' [ 55s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 55s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + continue [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 55s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 55s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 55s] + /bin/cat [ 55s] + for file in '$RES' [ 56s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 56s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 56s] + /bin/cat [ 56s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/share/man ']' [ 56s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 56s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/bin ']' [ 56s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.18-1.9 --unique-debug-src-base perl-PerlIO-gzip-0.18-1.9.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 56s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 56s] 158 blocks [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debuginfo.manifest [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debugsource.manifest [ 56s] + /usr/lib/rpm/check-buildroot [ 56s] + /usr/lib/rpm//brp-compress [ 56s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 56s] + /usr/lib/rpm/brp-python-hardlink [ 56s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 57s] Processing files: perl-PerlIO-gzip-0.18-1.9.armv7hl [ 57s] Provides: perl(PerlIO::gzip) = 0.18 perl-PerlIO-gzip = 0.18-1.9 perl-PerlIO-gzip(armv7hl-32) = 0.18-1.9 [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 57s] Processing files: perl-PerlIO-gzip-debugsource-0.18-1.9.armv7hl [ 57s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 57s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 57s] [ 57s] Provides: perl-PerlIO-gzip-debugsource = 0.18-1.9 perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.18-1.9 [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Processing files: perl-PerlIO-gzip-debuginfo-0.18-1.9.armv7hl [ 57s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 57s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 57s] [ 57s] Provides: perl-PerlIO-gzip-debuginfo = 0.18-1.9 perl-PerlIO-gzip-debuginfo(armv7hl-32) = 0.18-1.9 [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Recommends: perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.18-1.9 [ 57s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 57s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.9.src.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.18-1.9.armv7hl.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.18-1.9.armv7hl.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.18-1.9.armv7hl.rpm [ 57s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.F5OSZG [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd perl-PerlIO-gzip-0.18 [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.9.arm [ 57s] + exit 0 [ 57s] ... checking for files with abuild user/group [ 57s] ... creating baselibs [ 58s] ... comparing built packages with the former built [ 58s] /usr/lib/build/pkg-diff.sh [ 58s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.8.src.rpm /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.9.src.rpm [ 58s] This is not a prerelease project. Compare the project name. [ 58s] comparing rpmtags [ 58s] comparing RELEASE [ 58s] comparing PROVIDES [ 58s] comparing scripts [ 58s] comparing filelist [ 59s] comparing file checksum [ 59s] RPM meta information is identical [ 59s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.8.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.18-1.9.armv7hl.rpm [ 59s] Comparing perl-PerlIO-gzip-0.18-1.8.armv7hl.rpm to perl-PerlIO-gzip-0.18-1.9.armv7hl.rpm [ 59s] This is not a prerelease project. Compare the project name. [ 59s] comparing rpmtags [ 59s] comparing RELEASE [ 59s] comparing PROVIDES [ 59s] comparing scripts [ 59s] comparing filelist [ 59s] --- /tmp/tmp.BOFtn16563/tmp.vbeGJ16721 2022-02-23 17:44:05.575698520 +0000 [ 59s] +++ /tmp/tmp.BOFtn16563/tmp.FVlUg16738 2022-02-23 17:44:05.587698460 +0000 [ 59s] @@ -1,7 +1,7 @@ [ 59s] -/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi 0 (none) 40755 root root 0 4294967295 [ 59s] -/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO 0 (none) 40755 root root 0 4294967295 [ 59s] -/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO/gzip.pm 0 (none) 100444 root root 0 4294967295 [ 59s] -/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO 0 (none) 40755 root root 0 4294967295 [ 59s] -/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip 0 (none) 40755 root root 0 4294967295 [ 59s] -/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so 0 (none) 100755 root root 0 4294967295 [ 59s] +/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi 0 (none) 40755 root root 0 4294967295 [ 59s] +/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO 0 (none) 40755 root root 0 4294967295 [ 59s] +/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm 0 (none) 100444 root root 0 4294967295 [ 59s] +/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO 0 (none) 40755 root root 0 4294967295 [ 59s] +/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip 0 (none) 40755 root root 0 4294967295 [ 59s] +/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so 0 (none) 100755 root root 0 4294967295 [ 59s] [ 59s] RPM meta information is different [ 59s] compare /.build.oldpackages/perl-PerlIO-gzip-debuginfo-0.18-1.8.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.18-1.9.armv7hl.rpm [ 59s] skipping -debuginfo package [ 59s] compare /.build.oldpackages/perl-PerlIO-gzip-debugsource-0.18-1.8.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.18-1.9.armv7hl.rpm [ 59s] Comparing perl-PerlIO-gzip-debugsource-0.18-1.8.armv7hl.rpm to perl-PerlIO-gzip-debugsource-0.18-1.9.armv7hl.rpm [ 59s] This is not a prerelease project. Compare the project name. [ 59s] comparing rpmtags [ 60s] comparing RELEASE [ 60s] comparing PROVIDES [ 60s] comparing scripts [ 60s] comparing filelist [ 60s] comparing file checksum [ 60s] creating rename script [ 60s] RPM file checksum differs. [ 60s] Extracting packages [ 60s] Missing in old package: /usr/src/debug/perl-PerlIO-gzip-@VERSION@-@RELEASE_LONG@.arm/gzip.c [ 60s] [ 60s] obsnw12 finished "build perl-PerlIO-gzip.spec" at Wed Feb 23 17:44:06 UTC 2022. [ 60s] Retried build at Thu Mar 3 02:09:24 2022 returned same result, skipped Retried build at Thu Mar 10 06:58:17 2022 returned same result, skipped Retried build at Tue Mar 22 09:30:58 2022 returned same result, skipped Retried build at Sat Apr 9 15:27:29 2022 returned same result, skipped Retried build at Tue Apr 19 07:22:48 2022 returned same result, skipped Retried build at Tue May 17 06:50:05 2022 returned same result, skipped