[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw17 started "build _service:gbs:perl-Pod-Coverage.spec" at Wed Feb 23 17:48:20 UTC 2022. [ 0s] [ 0s] Building perl-Pod-Coverage for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 '50f6309e6bab92380f69c1a008035747' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [28/41] preinstalling coreutils... [ 9s] [29/41] preinstalling libacl... [ 9s] [30/41] preinstalling libelf... [ 9s] [31/41] preinstalling libmount... [ 9s] [32/41] preinstalling smack... [ 9s] [33/41] preinstalling bzip2... [ 9s] [34/41] preinstalling libmagic... [ 9s] [35/41] preinstalling libxml2... [ 9s] [36/41] preinstalling tar... [ 9s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-armv7l postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] reordering...cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 10s] [1/97] installing libmagic-data-5.41-6.269 [ 11s] [2/97] installing setup-0.9-6.2 [ 11s] warning: /etc/profile created as /etc/profile.rpmnew [ 11s] [3/97] installing filesystem-3.1-4.1 [ 11s] [4/97] installing glibc-2.30-13.49 [ 11s] [5/97] installing libatomic-9.2.0-15.43 [ 11s] [6/97] installing libgcc-9.2.0-15.43 [ 12s] [7/97] installing bash-3.2.57-5.1 [ 12s] [8/97] installing cpio-2.8-5.3 [ 12s] [9/97] installing diffutils-3.3-4.3 [ 12s] [10/97] installing findutils-4.3.8-5.332 [ 12s] [11/97] installing gdbm-1.8.3-3.631 [ 12s] [12/97] installing hostname-3.23-3.3 [ 12s] [13/97] installing libattr-2.5.1-5.319 [ 13s] [14/97] installing libblkid-2.36-10.4 [ 13s] [15/97] installing libbz2-1.0.8-5.203 [ 13s] [16/97] installing libcap-2.24-4.316 [ 13s] [17/97] installing libext2fs-1.46.0-4.37 [ 14s] [18/97] installing libfreebl3-3.34.1-3.465 [ 14s] [19/97] installing libgfortran-9.2.0-15.43 [ 14s] [20/97] installing libgomp-9.2.0-15.43 [ 15s] [21/97] installing libitm-9.2.0-15.43 [ 15s] [22/97] installing libltdl-2.4.2-3.469 [ 16s] [23/97] installing liblua-5.1.5-3.322 [ 16s] [24/97] installing liblzma-5.2.5-5.259 [ 16s] [25/97] installing libopenssl11-1.1.1l-6.193 [ 17s] [26/97] installing libpcre-8.45-5.2 [ 17s] [27/97] installing libpopt-1.16-3.579 [ 17s] [28/97] installing libsmack-1.3.1-4.319 [ 18s] [29/97] installing libsmartcols-2.36-10.4 [ 18s] [30/97] installing libsqlite-3.33.0-4.495 [ 18s] [31/97] installing libstdc++-9.2.0-15.43 [ 19s] [32/97] installing libuuid-2.36-10.4 [ 19s] [33/97] installing libzstd1-1.4.5-2.168 [ 19s] [34/97] installing m4-1.4.19-4.1 [ 19s] [35/97] installing net-tools-2.0_20121208git-4.4 [ 19s] [36/97] installing nspr-4.12-3.583 [ 20s] [37/97] installing patch-2.7.6-7.73 [ 20s] [38/97] installing pkg-config-0.28-3.579 [ 20s] [39/97] installing sed-4.1c-4.2 [ 20s] [40/97] installing update-alternatives-1.20.5-3.4 [ 20s] [41/97] installing which-2.17-4.4 [ 20s] [42/97] installing zlib-1.2.11-3.609 [ 20s] [43/97] installing build-compare-2015.04.28-3.215 [ 20s] [44/97] installing libstdc++-devel-9.2.0-15.43 [ 21s] [45/97] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 22s] [46/97] installing terminfo-base-full-6.2-7.253 [ 23s] [47/97] installing cpp-9.2.0-15.43 [ 24s] [48/97] installing gcc-c++-9.2.0-15.43 [ 25s] [49/97] installing binutils-2.33.1-9.219 [ 26s] [50/97] installing coreutils-6.9-5.115 [ 27s] [51/97] installing gawk-3.1.5-4.4 [ 27s] [52/97] installing grep-2.5.2-3.4 [ 27s] [53/97] installing libacl-2.2.53-4.534 [ 28s] [54/97] installing libcc1-9.2.0-15.43 [ 28s] [55/97] installing libelf-0.178-4.41 [ 28s] [56/97] installing libmount-2.36-10.4 [ 29s] [57/97] installing libubsan-9.2.0-15.43 [ 29s] [58/97] installing make-4.0-2.133 [ 29s] [59/97] installing nss-certs-3.34.1-3.465 [ 29s] [60/97] installing smack-1.3.1-4.319 [ 29s] [61/97] installing bzip2-1.0.8-5.203 [ 29s] [62/97] installing libfdisk-2.36-10.4 [ 30s] [63/97] installing libmagic-5.41-6.269 [ 30s] [64/97] installing libxml2-2.9.12-7.142 [ 30s] [65/97] installing perl-5.34.0-7.1 [ 33s] [66/97] installing xz-5.2.5-5.259 [ 33s] [67/97] installing build-mkbaselibs-20120927-3.3 [ 33s] [68/97] installing perl-Devel-Symdump-2.18-6.7 [ 33s] [69/97] installing linux-glibc-devel-3.10-4.435 [ 33s] [70/97] installing autoconf-2.69-5.83 [ 33s] [71/97] installing file-5.41-6.269 [ 34s] [72/97] installing glibc-locale-2.30-13.49 [ 34s] [73/97] installing tar-1.17-3.3 [ 34s] [74/97] installing gzip-1.3.12-3.583 [ 34s] [75/97] installing libncurses6-6.2-7.253 [ 35s] [76/97] installing pam-1.1.6-4.1 [ 35s] [77/97] installing tzdata-2021e-5.1 [ 35s] [78/97] installing libdw-0.178-4.41 [ 36s] [79/97] installing libarchive-3.5.2-3.76 [ 36s] [80/97] installing gcc-9.2.0-15.43 [ 37s] [81/97] installing libncurses-6.2-7.253 [ 37s] [82/97] installing glibc-devel-2.30-13.49 [ 37s] [83/97] installing qemu-accel-x86_64-armv7l-0.4-9.24 [ 44s] [84/97] installing automake-1.15.1-5.76 [ 44s] [85/97] installing less-466-3.4 [ 44s] [86/97] installing libreadline-5.2-3.200 [ 44s] [87/97] installing procps-ng-3.3.17-4.1 [ 45s] [88/97] installing libasm-0.178-4.41 [ 45s] [89/97] installing build-20120927-3.3 [ 45s] [90/97] installing libtool-2.4.2-3.469 [ 45s] [91/97] installing elfutils-0.178-4.41 [ 45s] [92/97] installing util-linux-2.36-10.4 [ 45s] [93/97] installing util-linux-su-2.36-10.4 [ 45s] [94/97] installing nss-3.34.1-3.465 [ 45s] [95/97] installing libsoftokn3-3.34.1-3.465 [ 46s] [96/97] installing rpm-4.14.1.1-9.89 [ 46s] [97/97] installing rpm-build-4.14.1.1-9.89 [ 46s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 46s] now finalizing build dir... [ 47s] Running build time source services... [ 47s] build target is armv7l-tizen-linux [ 47s] ----------------------------------------------------------------- [ 47s] I have the following modifications for perl-Pod-Coverage.spec: [ 47s] 22c22 [ 47s] < Release: 1 [ 47s] --- [ 47s] > Release: 4.9 [ 47s] ----------------------------------------------------------------- [ 47s] ----- building perl-Pod-Coverage.spec (user abuild) [ 47s] ----------------------------------------------------------------- [ 47s] ----------------------------------------------------------------- [ 47s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/50f6309e6bab92380f69c1a008035747-perl-Pod-Coverage' -ba /home/abuild/rpmbuild/SOURCES/perl-Pod-Coverage.spec [ 49s] Building target platforms: armv7l-tizen-linux [ 49s] Building for target armv7l-tizen-linux [ 49s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.VeYyik [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + rm -rf Pod-Coverage-0.22 [ 49s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Pod-Coverage-0.22.tar.gz [ 49s] + /bin/tar -xof - [ 49s] + STATUS=0 [ 49s] + '[' 0 -ne 0 ']' [ 49s] + cd Pod-Coverage-0.22 [ 49s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 49s] + cp /home/abuild/rpmbuild/SOURCES/perl-Pod-Coverage.manifest . [ 49s] + exit 0 [ 49s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.DMdTGn [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd Pod-Coverage-0.22 [ 49s] ++ uname -m [ 49s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + LDFLAGS= [ 49s] + export LDFLAGS [ 49s] + perl Makefile.PL INSTALLDIRS=vendor [ 50s] Checking if your kit is complete... [ 50s] Looks good [ 51s] Generating a Unix-style Makefile [ 51s] Writing Makefile for Pod::Coverage [ 51s] Writing MYMETA.yml and MYMETA.json [ 51s] + make -j4 [ 51s] cp bin/pod_cover blib/script/pod_cover [ 51s] "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pod_cover [ 52s] cp lib/Pod/Coverage.pm blib/lib/Pod/Coverage.pm [ 52s] cp lib/Pod/Coverage/ExportOnly.pm blib/lib/Pod/Coverage/ExportOnly.pm [ 52s] cp lib/Pod/Coverage/CountParents.pm blib/lib/Pod/Coverage/CountParents.pm [ 52s] cp lib/Pod/Coverage/Overloader.pm blib/lib/Pod/Coverage/Overloader.pm [ 53s] Manifying 4 pod documents [ 53s] + exit 0 [ 53s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sF8tWj [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd Pod-Coverage-0.22 [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm [ 53s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm [ 53s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm install_vendor [ 54s] Manifying 4 pod documents [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage/Overloader.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage/CountParents.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage/ExportOnly.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/share/man/man3/Pod::Coverage::ExportOnly.3 [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/share/man/man3/Pod::Coverage::Overloader.3 [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/share/man/man3/Pod::Coverage.3 [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/share/man/man3/Pod::Coverage::CountParents.3 [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/bin/pod_cover [ 55s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 55s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 55s] + xargs -0 -r rm [ 55s] + '[' armv7l == noarch ']' [ 55s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 55s] + FILES=perl-Pod-Coverage.files [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0 -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ -type d [ 55s] ++ sort [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] + continue [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=Pod [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=Pod/Coverage [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/auto [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/auto/Pod [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for dir in '`find ${base_dir} -type d | sort`' [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod/Coverage = /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 55s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod/Coverage [ 55s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 55s] + el=armv7l-linux-thread-multi/auto/Pod/Coverage [ 55s] + all_dir=(${all_dir[@]} $el) [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' Pod = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/Pod = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod -maxdepth 1 -type f [ 55s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage.pm [ 55s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage.pm ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/Pod [ 55s] + /bin/cat [ 55s] + for file in '$RES' [ 55s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage.pm [ 55s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage.pm [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' Pod/Coverage = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage -maxdepth 1 -type f [ 55s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/Overloader.pm [ 55s] /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/CountParents.pm [ 55s] /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/ExportOnly.pm' [ 55s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/Overloader.pm [ 55s] /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/CountParents.pm [ 55s] /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/ExportOnly.pm' ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage [ 55s] + /bin/cat [ 55s] + for file in '$RES' [ 55s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/Overloader.pm [ 55s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage/Overloader.pm [ 55s] + /bin/cat [ 55s] + for file in '$RES' [ 55s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/CountParents.pm [ 55s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage/CountParents.pm [ 55s] + /bin/cat [ 55s] + for file in '$RES' [ 55s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//Pod/Coverage/ExportOnly.pm [ 55s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/Pod/Coverage/ExportOnly.pm [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + continue [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/auto/Pod = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/Pod ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/Pod -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod [ 55s] + /bin/cat [ 55s] + for i in '${all_dir[@]}' [ 55s] + '[' armv7l-linux-thread-multi/auto/Pod/Coverage = auto ']' [ 55s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod/Coverage = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/Pod/Coverage ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/Pod/Coverage -maxdepth 1 -type f [ 55s] + RES= [ 55s] + '[' -n '' ']' [ 55s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/Pod/Coverage [ 55s] + /bin/cat [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/share/man ']' [ 55s] + fgen_file '/usr/share/man/man?/*' [ 55s] + /bin/cat [ 55s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/var/adm/perl-modules/perl-Pod-Coverage ']' [ 55s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/bin ']' [ 55s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/bin -maxdepth 1 -type f [ 55s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/bin/pod_cover [ 55s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/bin/pod_cover ']' [ 55s] + for file in '$RES' [ 55s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm/usr/bin/pod_cover [ 55s] + fgen_file /usr/bin/pod_cover [ 55s] + /bin/cat [ 55s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.22-4.9 --unique-debug-src-base perl-Pod-Coverage-0.22-4.9.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/Pod-Coverage-0.22 [ 55s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Pod-Coverage-0.22/perl-Pod-Coverage-debuginfo.manifest [ 55s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Pod-Coverage-0.22/perl-Pod-Coverage-debugsource.manifest [ 55s] + /usr/lib/rpm/check-buildroot [ 55s] + /usr/lib/rpm//brp-compress [ 55s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 55s] + /usr/lib/rpm/brp-python-hardlink [ 55s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm [ 55s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.6W2xfm [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd Pod-Coverage-0.22 [ 55s] + make test [ 56s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 57s] t/01compile.t ..... ok [ 58s] t/02simple.t ...... ok [ 59s] t/03import.t ...... ok [ 60s] t/04cvgv.t ........ ok [ 61s] t/05parentage.t ... ok [ 61s] t/06trustme.t ..... ok [ 62s] t/07pod.t ......... skipped: Test::Pod 1.00 required for testing POD [ 63s] t/08tie.t ......... ok [ 64s] t/09whitespace.t .. ok [ 64s] All tests successful. [ 64s] Files=9, Tests=66, 8 wallclock secs ( 0.27 usr 0.00 sys + 7.33 cusr 0.10 csys = 7.70 CPU) [ 64s] Result: PASS [ 64s] + exit 0 [ 64s] Processing files: perl-Pod-Coverage-0.22-4.9.armv7l [ 64s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 64s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 64s] [ 64s] Provides: perl(Pod::Coverage) = 0.22 perl(Pod::Coverage::CountParents) perl(Pod::Coverage::ExportOnly) perl(Pod::Coverage::Extractor) perl(Pod::Coverage::Overloader) perl-Pod-Coverage = 0.22-4.9 perl-Pod-Coverage(armv7l-32) = 0.22-4.9 [ 64s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 64s] Requires: /usr/bin/perl [ 64s] Processing files: perl-Pod-Coverage-debugsource-0.22-4.9.armv7l [ 64s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/Pod-Coverage-0.22/debugsourcefiles.list [ 64s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 64s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 64s] [ 64s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm [ 64s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Pod-Coverage-0.22-4.9.src.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Pod-Coverage-0.22-4.9.armv7l.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Pod-Coverage-debugsource-0.22-4.9.armv7l.rpm [ 64s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JhDqXk [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd Pod-Coverage-0.22 [ 64s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.22-4.9.arm [ 64s] + exit 0 [ 64s] ... checking for files with abuild user/group [ 64s] ... creating baselibs [ 65s] ... comparing built packages with the former built [ 65s] /usr/lib/build/pkg-diff.sh [ 65s] compare /.build.oldpackages/perl-Pod-Coverage-0.22-4.8.src.rpm /home/abuild/rpmbuild/SRPMS/perl-Pod-Coverage-0.22-4.9.src.rpm [ 65s] This is not a prerelease project. Compare the project name. [ 65s] comparing rpmtags [ 65s] comparing RELEASE [ 65s] comparing PROVIDES [ 65s] comparing scripts [ 65s] comparing filelist [ 65s] comparing file checksum [ 65s] RPM meta information is identical [ 65s] compare /.build.oldpackages/perl-Pod-Coverage-0.22-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-Pod-Coverage-0.22-4.9.armv7l.rpm [ 65s] Comparing perl-Pod-Coverage-0.22-4.8.armv7l.rpm to perl-Pod-Coverage-0.22-4.9.armv7l.rpm [ 66s] This is not a prerelease project. Compare the project name. [ 66s] comparing rpmtags [ 66s] comparing RELEASE [ 66s] comparing PROVIDES [ 66s] comparing scripts [ 66s] comparing filelist [ 66s] comparing file checksum [ 66s] creating rename script [ 66s] RPM meta information is identical [ 66s] compare /.build.oldpackages/perl-Pod-Coverage-debugsource-0.22-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-Pod-Coverage-debugsource-0.22-4.9.armv7l.rpm [ 66s] Comparing perl-Pod-Coverage-debugsource-0.22-4.8.armv7l.rpm to perl-Pod-Coverage-debugsource-0.22-4.9.armv7l.rpm [ 66s] This is not a prerelease project. Compare the project name. [ 66s] comparing rpmtags [ 66s] comparing RELEASE [ 66s] comparing PROVIDES [ 66s] comparing scripts [ 66s] comparing filelist [ 66s] comparing file checksum [ 66s] creating rename script [ 66s] RPM meta information is identical [ 66s] compare validated built as identical ! [ 66s] [ 66s] obsnw17 finished "build perl-Pod-Coverage.spec" at Wed Feb 23 17:49:26 UTC 2022. [ 66s] Retried build at Thu Mar 3 01:17:27 2022 returned same result, skipped Retried build at Thu Mar 10 05:32:38 2022 returned same result, skipped Retried build at Tue Mar 22 06:42:30 2022 returned same result, skipped Retried build at Sat Apr 9 15:24:31 2022 returned same result, skipped Retried build at Tue Apr 19 05:30:43 2022 returned same result, skipped Retried build at Tue May 17 06:03:49 2022 returned same result, skipped