[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw12 started "build _service:gbs:pcre.spec" at Tue Oct 8 19:51:30 UTC 2019. [ 0s] [ 0s] Building pcre for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 'cea56362f8880b488dedeb0be2aee013' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libelf... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/94] installing libmagic-data-5.37-16.27 [ 8s] [2/94] installing setup-0.9-9.26 [ 8s] warning: /etc/profile created as /etc/profile.rpmnew [ 8s] [3/94] installing filesystem-3.1-8.1 [ 8s] [4/94] installing glibc-2.24-17.21 [ 9s] [5/94] installing libatomic-6.2.1-39.1 [ 9s] [6/94] installing libgcc-6.2.1-39.1 [ 9s] [7/94] installing bash-3.2.57-6.4 [ 9s] [8/94] installing binutils-2.27-14.54 [ 10s] [9/94] installing cpio-2.11-3.4 [ 10s] [10/94] installing diffutils-3.3-3.4 [ 10s] [11/94] installing findutils-4.3.8-6.129 [ 10s] [12/94] installing gdbm-1.8.3-4.18 [ 10s] [13/94] installing hostname-3.20-5.4 [ 10s] [14/94] installing libattr-2.4.47-5.378 [ 10s] [15/94] installing libbz2-1.0.6-5.79 [ 11s] [16/94] installing libcap-2.24-4.581 [ 11s] [17/94] installing libelf-0.153-3.200 [ 11s] [18/94] installing libext2fs-1.43.4-6.2 [ 12s] [19/94] installing libfreebl3-3.34.1-5.316 [ 12s] [20/94] installing libgomp-6.2.1-39.1 [ 12s] [21/94] installing libitm-6.2.1-39.1 [ 13s] [22/94] installing libltdl-2.4.2-5.41 [ 13s] [23/94] installing liblua-5.1.5-5.33 [ 13s] [24/94] installing liblzma-5.2.4-6.145 [ 14s] [25/94] installing libpcre-8.43-7.2 [ 14s] [26/94] installing libpopt-1.16-4.91 [ 14s] [27/94] installing libsmack-1.3.1-5.226 [ 15s] [28/94] installing libsmartcols-2.30-13.26 [ 15s] [29/94] installing libsqlite-3.29.0-16.11 [ 15s] [30/94] installing libstdc++-6.2.1-39.1 [ 16s] [31/94] installing libuuid-2.30-13.26 [ 16s] [32/94] installing m4-1.4.17-3.4 [ 16s] [33/94] installing net-tools-2.0_20121208git-3.2 [ 16s] [34/94] installing nspr-4.12-4.71 [ 16s] [35/94] installing patch-2.7-3.91 [ 16s] [36/94] installing pkg-config-0.28-5.532 [ 16s] [37/94] installing sed-4.1c-4.4 [ 16s] [38/94] installing update-alternatives-1.18.15-4.4 [ 17s] [39/94] installing which-2.20-6.4 [ 17s] [40/94] installing zlib-1.2.11-5.278 [ 17s] [41/94] installing build-compare-2015.04.28-3.254 [ 17s] [42/94] installing libstdc++-devel-6.2.1-39.1 [ 17s] [43/94] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 19s] [44/94] installing terminfo-base-full-6.1-11.132 [ 19s] [45/94] installing cpp-6.2.1-39.1 [ 19s] [46/94] installing gcc-c++-6.2.1-39.1 [ 20s] [47/94] installing coreutils-6.9-3.35 [ 20s] [48/94] installing db4-4.8.30.NC-3.581 [ 21s] [49/94] installing gawk-3.1.5-5.5 [ 21s] [50/94] installing grep-2.5.2-6.4 [ 21s] [51/94] installing libacl-2.2.52-5.396 [ 21s] [52/94] installing libasm-0.153-3.200 [ 21s] [53/94] installing libblkid-2.30-13.26 [ 21s] [54/94] installing libcc1-6.2.1-39.1 [ 22s] [55/94] installing libgfortran-6.2.1-39.1 [ 22s] [56/94] installing libubsan-6.2.1-39.1 [ 22s] [57/94] installing make-4.0-4.104 [ 23s] [58/94] installing nss-certs-3.34.1-5.316 [ 23s] [59/94] installing smack-1.3.1-5.226 [ 23s] [60/94] installing bzip2-1.0.6-5.79 [ 23s] [61/94] installing libmagic-5.37-16.27 [ 23s] [62/94] installing libxml2-2.9.7-7.65 [ 23s] [63/94] installing xz-5.2.4-6.145 [ 23s] [64/94] installing libdw-0.153-3.200 [ 24s] [65/94] installing linux-glibc-devel-3.10-4.226 [ 24s] [66/94] installing file-5.37-16.27 [ 24s] [67/94] installing glibc-locale-2.24-17.21 [ 25s] [68/94] installing libmount-2.30-13.26 [ 25s] [69/94] installing tar-1.17-4.4 [ 25s] [70/94] installing gzip-1.3.12-7.351 [ 25s] [71/94] installing libfdisk-2.30-13.26 [ 26s] [72/94] installing libncurses6-6.1-11.132 [ 26s] [73/94] installing pam-1.1.6-8.2 [ 26s] [74/94] installing perl-5.30.0-10.2 [ 28s] [75/94] installing tzdata-2019a-11.1 [ 29s] [76/94] installing elfutils-0.153-3.200 [ 29s] [77/94] installing gcc-6.2.1-39.1 [ 30s] [78/94] installing build-mkbaselibs-20120927-3.1 [ 30s] [79/94] installing libncurses-6.1-11.132 [ 30s] [80/94] installing glibc-devel-2.24-17.21 [ 30s] [81/94] installing qemu-accel-x86_64-armv7l-0.4-15.2 [ 36s] [82/94] installing autoconf-2.69-5.195 [ 36s] [83/94] installing less-466-8.9 [ 36s] [84/94] installing libreadline-5.2-5.75 [ 36s] [85/94] installing procps-ng-3.3.15-8.4 [ 37s] [86/94] installing automake-1.15.1-6.311 [ 37s] [87/94] installing build-20120927-3.1 [ 37s] [88/94] installing util-linux-2.30-13.26 [ 37s] [89/94] installing libtool-2.4.2-5.41 [ 37s] [90/94] installing util-linux-su-2.30-13.26 [ 37s] [91/94] installing nss-3.34.1-5.316 [ 38s] [92/94] installing libsoftokn3-3.34.1-5.316 [ 38s] [93/94] installing rpm-4.11.0.1-14.42 [ 38s] [94/94] installing rpm-build-4.11.0.1-14.42 [ 38s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 38s] now finalizing build dir... [ 39s] Running build time source services... [ 39s] build target is armv7l-tizen-linux [ 39s] ----------------------------------------------------------------- [ 39s] I have the following modifications for pcre.spec: [ 39s] 12c12 [ 39s] < Release: 0 [ 39s] --- [ 39s] > Release: 7.3 [ 39s] 185a186 [ 39s] > %changelog [ 39s] ----------------------------------------------------------------- [ 39s] ----- building pcre.spec (user abuild) [ 39s] ----------------------------------------------------------------- [ 39s] ----------------------------------------------------------------- [ 39s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/cea56362f8880b488dedeb0be2aee013-pcre' -ba /home/abuild/rpmbuild/SOURCES/pcre.spec [ 39s] Building target platforms: armv7l-tizen-linux [ 39s] Building for target armv7l-tizen-linux [ 39s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GCKhNl [ 39s] + umask 022 [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + rm -rf pcre-8.43 [ 39s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.43.tar.bz2 [ 39s] + /bin/tar -xf - [ 40s] + STATUS=0 [ 40s] + '[' 0 -ne 0 ']' [ 40s] + cd pcre-8.43 [ 40s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 40s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 40s] + exit 0 [ 40s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xwN04A [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd pcre-8.43 [ 40s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + LDFLAGS= [ 40s] + export LDFLAGS [ 40s] + autoreconf -fiv [ 42s] autoreconf: Entering directory `.' [ 43s] autoreconf: configure.ac: not using Gettext [ 44s] autoreconf: running: aclocal --force -I m4 [ 54s] autoreconf: configure.ac: tracing [ 56s] autoreconf: running: libtoolize --copy --force [ 56s] libtoolize: putting auxiliary files in `.'. [ 56s] libtoolize: copying file `./ltmain.sh' [ 56s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 56s] libtoolize: copying file `m4/libtool.m4' [ 56s] libtoolize: copying file `m4/ltoptions.m4' [ 56s] libtoolize: copying file `m4/ltsugar.m4' [ 56s] libtoolize: copying file `m4/ltversion.m4' [ 56s] libtoolize: copying file `m4/lt~obsolete.m4' [ 67s] autoreconf: running: /usr/bin/autoconf --force [ 72s] autoreconf: running: /usr/bin/autoheader --force [ 74s] autoreconf: running: automake --add-missing --copy --force-missing [ 81s] autoreconf: Leaving directory `.' [ 81s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 81s] checking for a BSD-compatible install... /bin/install -c [ 81s] checking whether build environment is sane... yes [ 81s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 81s] checking for gawk... gawk [ 81s] checking whether make sets $(MAKE)... yes [ 81s] checking whether make supports nested variables... yes [ 81s] checking whether make supports nested variables... (cached) yes [ 81s] checking for style of include used by make... GNU [ 81s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 81s] checking whether the C compiler works... yes [ 81s] checking for C compiler default output file name... a.out [ 81s] checking for suffix of executables... [ 82s] checking whether we are cross compiling... no [ 82s] checking for suffix of object files... o [ 82s] checking whether we are using the GNU C compiler... yes [ 82s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 82s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 82s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 82s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 82s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 82s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 82s] checking for armv7l-tizen-linux-gnueabi-link... no [ 82s] checking for ar... ar [ 82s] checking the archiver (ar) interface... ar [ 82s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 82s] checking whether we are using the GNU C compiler... (cached) yes [ 82s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 82s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 82s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 82s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 82s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 82s] checking whether we are using the GNU C++ compiler... yes [ 82s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 82s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 82s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 82s] checking for grep that handles long lines and -e... /bin/grep [ 82s] checking for egrep... /bin/grep -E [ 82s] checking for ANSI C header files... yes [ 82s] checking for sys/types.h... yes [ 82s] checking for sys/stat.h... yes [ 82s] checking for stdlib.h... yes [ 82s] checking for string.h... yes [ 82s] checking for memory.h... yes [ 82s] checking for strings.h... yes [ 82s] checking for inttypes.h... yes [ 82s] checking for stdint.h... yes [ 82s] checking for unistd.h... yes [ 82s] checking for int64_t... yes [ 82s] checking build system type... armv7l-tizen-linux-gnueabi [ 83s] checking host system type... armv7l-tizen-linux-gnueabi [ 83s] checking how to print strings... printf [ 83s] checking for a sed that does not truncate output... /bin/sed [ 83s] checking for fgrep... /bin/grep -F [ 83s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 83s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 83s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 83s] checking the name lister (/bin/nm -B) interface... BSD nm [ 83s] checking whether ln -s works... yes [ 83s] checking the maximum length of command line arguments... 1572864 [ 83s] checking whether the shell understands some XSI constructs... yes [ 83s] checking whether the shell understands "+="... yes [ 83s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 83s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 83s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 83s] checking for armv7l-tizen-linux-gnueabi-objdump... objdump [ 83s] checking how to recognize dependent libraries... pass_all [ 83s] checking for armv7l-tizen-linux-gnueabi-dlltool... dlltool [ 83s] checking how to associate runtime and link libraries... printf %s\n [ 83s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 83s] checking for archiver @FILE support... @ [ 83s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 83s] checking for strip... strip [ 83s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 83s] checking for ranlib... ranlib [ 83s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 83s] checking for sysroot... no [ 83s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 83s] checking for mt... no [ 83s] checking if : is a manifest tool... no [ 83s] checking for dlfcn.h... yes [ 83s] checking for objdir... .libs [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 83s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 83s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 83s] checking whether -lc should be explicitly linked in... no [ 83s] checking dynamic linker characteristics... GNU/Linux ld.so [ 83s] checking how to hardcode library paths into programs... immediate [ 83s] checking whether stripping libraries is possible... yes [ 83s] checking if libtool supports shared libraries... yes [ 83s] checking whether to build shared libraries... yes [ 83s] checking whether to build static libraries... yes [ 83s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 83s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 83s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 83s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 83s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 83s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 83s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 83s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 83s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 83s] checking how to hardcode library paths into programs... immediate [ 83s] checking whether ln -s works... yes [ 83s] checking whether the -Werror option is usable... yes [ 83s] checking for simple visibility declarations... yes [ 83s] checking for ANSI C header files... (cached) yes [ 83s] checking limits.h usability... yes [ 83s] checking limits.h presence... yes [ 83s] checking for limits.h... yes [ 83s] checking for sys/types.h... (cached) yes [ 83s] checking for sys/stat.h... (cached) yes [ 84s] checking dirent.h usability... yes [ 84s] checking dirent.h presence... yes [ 84s] checking for dirent.h... yes [ 84s] checking windows.h usability... no [ 84s] checking windows.h presence... no [ 84s] checking for windows.h... no [ 84s] checking for alias support in the linker... no [ 84s] checking for alias support in the linker... no [ 84s] checking string usability... yes [ 84s] checking string presence... yes [ 84s] checking for string... yes [ 84s] checking bits/type_traits.h usability... no [ 84s] checking bits/type_traits.h presence... no [ 84s] checking for bits/type_traits.h... no [ 84s] checking type_traits.h usability... no [ 84s] checking type_traits.h presence... no [ 84s] checking for type_traits.h... no [ 84s] checking for strtoq... yes [ 84s] checking for long long... yes [ 84s] checking for unsigned long long... yes [ 84s] checking for an ANSI C-conforming const... yes [ 84s] checking for size_t... yes [ 84s] checking for bcopy... yes [ 84s] checking for memmove... yes [ 84s] checking for strerror... yes [ 85s] checking zlib.h usability... no [ 85s] checking zlib.h presence... no [ 85s] checking for zlib.h... no [ 85s] checking for gzopen in -lz... no [ 85s] checking bzlib.h usability... no [ 85s] checking bzlib.h presence... no [ 85s] checking for bzlib.h... no [ 85s] checking for libbz2... no [ 85s] checking for the pthreads library -lpthreads... no [ 85s] checking whether pthreads work without any flags... no [ 85s] checking whether pthreads work with -Kthread... no [ 85s] checking whether pthreads work with -kthread... no [ 85s] checking for the pthreads library -llthread... no [ 85s] checking whether pthreads work with -pthread... yes [ 85s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 85s] checking if more special flags are required for pthreads... no [ 85s] checking for PTHREAD_PRIO_INHERIT... yes [ 85s] checking that generated files are newer than configure... done [ 85s] configure: creating ./config.status [ 86s] config.status: creating Makefile [ 86s] config.status: creating libpcre.pc [ 86s] config.status: creating libpcre16.pc [ 86s] config.status: creating libpcre32.pc [ 86s] config.status: creating libpcreposix.pc [ 86s] config.status: creating libpcrecpp.pc [ 86s] config.status: creating pcre-config [ 86s] config.status: creating pcre.h [ 86s] config.status: creating pcre_stringpiece.h [ 86s] config.status: creating pcrecpparg.h [ 86s] config.status: creating config.h [ 86s] config.status: executing depfiles commands [ 87s] config.status: executing libtool commands [ 88s] config.status: executing script-chmod commands [ 88s] config.status: executing delete-old-chartables commands [ 88s] [ 88s] pcre-8.43 configuration summary: [ 88s] [ 88s] Install prefix .................. : /usr [ 88s] C preprocessor .................. : armv7l-tizen-linux-gnueabi-gcc -E [ 88s] C compiler ...................... : armv7l-tizen-linux-gnueabi-gcc [ 88s] C++ preprocessor ................ : armv7l-tizen-linux-gnueabi-g++ -E [ 88s] C++ compiler .................... : armv7l-tizen-linux-gnueabi-g++ [ 88s] Linker .......................... : /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 88s] C preprocessor flags ............ : [ 88s] C compiler flags ................ : -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden [ 88s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -fvisibility=hidden -fvisibility-inlines-hidden [ 88s] Linker flags .................... : [ 88s] Extra libraries ................. : [ 88s] [ 88s] Build 8 bit pcre library ........ : yes [ 88s] Build 16 bit pcre library ....... : no [ 88s] Build 32 bit pcre library ....... : no [ 88s] Build C++ library ............... : yes [ 88s] Enable JIT compiling support .... : yes [ 88s] Enable UTF-8/16/32 support ...... : yes [ 88s] Unicode properties .............. : yes [ 88s] Newline char/sequence ........... : lf [ 88s] \R matches only ANYCRLF ......... : no [ 88s] EBCDIC coding ................... : no [ 88s] EBCDIC code for NL .............. : n/a [ 88s] Rebuild char tables ............. : no [ 88s] Use stack recursion ............. : yes [ 88s] POSIX mem threshold ............. : 10 [ 88s] Internal link size .............. : 2 [ 88s] Nested parentheses limit ........ : 250 [ 88s] Match limit ..................... : 10000000 [ 88s] Match limit recursion ........... : MATCH_LIMIT [ 88s] Build shared libs ............... : yes [ 88s] Build static libs ............... : yes [ 88s] Use JIT in pcregrep ............. : yes [ 88s] Buffer size for pcregrep ........ : 20480 [ 88s] Link pcregrep with libz ......... : no [ 88s] Link pcregrep with libbz2 ....... : no [ 88s] Link pcretest with libedit ...... : no [ 88s] Link pcretest with libreadline .. : no [ 88s] Valgrind support ................ : no [ 88s] Code coverage ................... : no [ 88s] [ 88s] + make -j8 [ 88s] rm -f pcre_chartables.c [ 88s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 88s] make all-am [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 88s] CC libpcre_la-pcre_byte_order.lo [ 88s] CC libpcre_la-pcre_compile.lo [ 88s] CC libpcre_la-pcre_config.lo [ 88s] CC libpcre_la-pcre_dfa_exec.lo [ 88s] CC libpcre_la-pcre_exec.lo [ 88s] CC libpcre_la-pcre_fullinfo.lo [ 88s] CC libpcre_la-pcre_get.lo [ 88s] CC libpcre_la-pcre_globals.lo [ 88s] CC libpcre_la-pcre_jit_compile.lo [ 88s] CC libpcre_la-pcre_maketables.lo [ 88s] CC libpcre_la-pcre_newline.lo [ 88s] CC libpcre_la-pcre_ord2utf8.lo [ 88s] CC libpcre_la-pcre_refcount.lo [ 88s] CC libpcre_la-pcre_string_utils.lo [ 88s] CC libpcre_la-pcre_study.lo [ 88s] CC libpcre_la-pcre_tables.lo [ 88s] CC libpcre_la-pcre_ucd.lo [ 88s] CC libpcre_la-pcre_valid_utf8.lo [ 88s] CC libpcre_la-pcre_version.lo [ 88s] CC libpcre_la-pcre_xclass.lo [ 88s] CC libpcre_la-pcre_chartables.lo [ 88s] CC libpcreposix_la-pcreposix.lo [ 89s] CXX libpcrecpp_la-pcrecpp.lo [ 89s] CXX libpcrecpp_la-pcre_scanner.lo [ 89s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 89s] CC pcretest-pcretest.o [ 90s] CC pcretest-pcre_printint.o [ 90s] CC pcregrep-pcregrep.o [ 90s] CC pcre_jit_test-pcre_jit_test.o [ 90s] CXX pcrecpp_unittest-pcrecpp_unittest.o [ 90s] CXX pcre_scanner_unittest-pcre_scanner_unittest.o [ 91s] CXX pcre_stringpiece_unittest-pcre_stringpiece_unittest.o [ 101s] CCLD libpcre.la [ 101s] CCLD libpcreposix.la [ 101s] CXXLD libpcrecpp.la [ 101s] CCLD pcre_jit_test [ 101s] CCLD pcretest [ 101s] CCLD pcregrep [ 101s] CXXLD pcrecpp_unittest [ 101s] CXXLD pcre_scanner_unittest [ 101s] CXXLD pcre_stringpiece_unittest [ 101s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 101s] + exit 0 [ 101s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.eMrJEk [ 101s] + umask 022 [ 101s] + cd /home/abuild/rpmbuild/BUILD [ 101s] + cd pcre-8.43 [ 101s] + LANG=C [ 101s] + export LANG [ 101s] + unset DISPLAY [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm [ 101s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm [ 101s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm install [ 101s] /bin/make install-am [ 101s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 101s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib' [ 101s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib' [ 101s] libtool: install: /bin/install -c .libs/libpcre.so.1.2.11 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcre.so.1.2.11 [ 101s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib && { ln -s -f libpcre.so.1.2.11 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.2.11 libpcre.so.1; }; }) [ 101s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib && { ln -s -f libpcre.so.1.2.11 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.2.11 libpcre.so; }; }) [ 101s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcre.la [ 101s] libtool: install: warning: relinking `libpcreposix.la' [ 101s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fvisibility=hidden -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:6:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm) [ 101s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.6T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcreposix.so.0.0.6 [ 101s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.6 libpcreposix.so.0; }; }) [ 101s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.6 libpcreposix.so; }; }) [ 101s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcreposix.la [ 101s] libtool: install: warning: relinking `libpcrecpp.la' [ 101s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -version-info 0:1:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm) [ 102s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.1T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcrecpp.so.0.0.1 [ 102s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so.0; }; }) [ 102s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so; }; }) [ 102s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcrecpp.la [ 102s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcre.a [ 102s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcre.a [ 102s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcre.a [ 102s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcreposix.a [ 102s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcreposix.a [ 102s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcreposix.a [ 102s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcrecpp.a [ 102s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcrecpp.a [ 102s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcrecpp.a [ 102s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin' [ 102s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin' [ 102s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 102s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 102s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib' [ 102s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin/pcretest [ 102s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 102s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 102s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib' [ 102s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin/pcregrep [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin' [ 102s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre' [ 102s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre/html' [ 102s] /bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre-config.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre32.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_exec.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_utf32_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre/html' [ 102s] /bin/install -c -m 644 doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre/html' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre/html' [ 102s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre/html' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/include' [ 102s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/include' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man1' [ 102s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man1' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3' [ 102s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre32.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_exec.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_utf32_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcredemo.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3' [ 102s] /bin/install -c -m 644 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/include' [ 102s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/include' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/pkgconfig' [ 102s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/pkgconfig' [ 102s] /bin/make install-data-hook [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 102s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 102s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_compile.3 [ 102s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_compile2.3 [ 102s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_config.3 [ 102s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 102s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 102s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 102s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_exec.3 [ 102s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_free_study.3 [ 102s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_free_substring.3 [ 102s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 102s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 102s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 102s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 102s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 102s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_get_substring.3 [ 102s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 102s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_jit_exec.3 [ 102s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 103s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 103s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_maketables.3 [ 103s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 103s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_refcount.3 [ 103s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_study.3 [ 103s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 103s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre16_version.3 [ 103s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_assign_jit_stack.3 [ 103s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_compile.3 [ 103s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_compile2.3 [ 103s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_config.3 [ 103s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_copy_named_substring.3 [ 103s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_copy_substring.3 [ 103s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_dfa_exec.3 [ 103s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_exec.3 [ 103s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_free_study.3 [ 103s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_free_substring.3 [ 103s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_free_substring_list.3 [ 103s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_fullinfo.3 [ 103s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_get_named_substring.3 [ 103s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_get_stringnumber.3 [ 103s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_get_stringtable_entries.3 [ 103s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_get_substring.3 [ 103s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_get_substring_list.3 [ 103s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_jit_exec.3 [ 103s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_jit_stack_alloc.3 [ 103s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_jit_stack_free.3 [ 103s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_maketables.3 [ 103s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_pattern_to_host_byte_order.3 [ 103s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_refcount.3 [ 103s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_study.3 [ 103s] ln -sf pcre_utf32_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_utf32_to_host_byte_order.3 [ 103s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/man/man3/pcre32_version.3 [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 103s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/info/dir [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm -regex '.*\.la$' [ 103s] + xargs rm -f -- [ 103s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm//usr/share/doc/packages [ 103s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm//usr/share/doc/packages/pcre-doc [ 103s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/*.la' [ 103s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pcre-8.43 [ 103s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin/pcregrep [ 103s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/bin/pcretest [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcre.so.1.2.11 [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcrecpp.so.0.0.1 [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/lib/libpcreposix.so.0.0.6 [ 104s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 104s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 104s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 104s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 104s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 104s] 4373 blocks [ 104s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debuginfo.manifest [ 104s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debugsource.manifest [ 104s] + /usr/lib/rpm/check-buildroot [ 104s] + /usr/lib/rpm//brp-compress [ 105s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 106s] + /usr/lib/rpm/brp-python-hardlink [ 106s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm [ 106s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.vRTqDg [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd pcre-8.43 [ 106s] + export LANG=POSIX [ 106s] + LANG=POSIX [ 106s] + make check [ 106s] make check-am [ 106s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 106s] make [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 106s] make all-am [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 106s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 106s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 106s] make check-TESTS [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 124s] PASS: pcre_jit_test [ 124s] PASS: pcrecpp_unittest [ 124s] PASS: pcre_scanner_unittest [ 124s] PASS: pcre_stringpiece_unittest [ 134s] PASS: RunTest [ 139s] PASS: RunGrepTest [ 139s] ============================================================================ [ 139s] Testsuite summary for PCRE 8.43 [ 139s] ============================================================================ [ 139s] # TOTAL: 6 [ 139s] # PASS: 6 [ 139s] # SKIP: 0 [ 139s] # XFAIL: 0 [ 139s] # FAIL: 0 [ 139s] # XPASS: 0 [ 139s] # ERROR: 0 [ 139s] ============================================================================ [ 139s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 139s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 139s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 139s] + exit 0 [ 139s] Processing files: pcre-debugsource-8.43-7.3.armv7l [ 139s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 139s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 139s] [ 139s] Provides: pcre-debugsource = 8.43-7.3 pcre-debugsource(armv7l-32) = 8.43-7.3 [ 139s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 139s] Processing files: pcre-devel-8.43-7.3.armv7l [ 139s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 139s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 139s] [ 140s] Provides: pcre-devel = 8.43-7.3 pcre-devel(armv7l-32) = 8.43-7.3 pkgconfig(libpcre) = 8.43 pkgconfig(libpcrecpp) = 8.43 pkgconfig(libpcreposix) = 8.43 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1 libpcrecpp.so.0 libpcreposix.so.0 pkgconfig(libpcre) [ 140s] Processing files: pcre-devel-static-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Provides: pcre-devel-static = 8.43-7.3 pcre-devel-static(armv7l-32) = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Processing files: libpcre-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.pi0Cbz [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd pcre-8.43 [ 140s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcre [ 140s] + export LICENSEDIR [ 140s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcre [ 140s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcre [ 140s] + exit 0 [ 140s] Provides: libpcre = 8.43-7.3 libpcre(armv7l-32) = 8.43-7.3 libpcre.so.1 pcre = 8.43 [ 140s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Requires(post): /sbin/ldconfig [ 140s] Requires(postun): /sbin/ldconfig [ 140s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 140s] Obsoletes: pcre < 8.43 [ 140s] Processing files: libpcreposix-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.vQsAPR [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd pcre-8.43 [ 140s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcreposix [ 140s] + export LICENSEDIR [ 140s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcreposix [ 140s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcreposix [ 140s] + exit 0 [ 140s] Provides: libpcreposix = 8.43-7.3 libpcreposix(armv7l-32) = 8.43-7.3 libpcreposix.so.0 [ 140s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Requires(post): /sbin/ldconfig [ 140s] Requires(postun): /sbin/ldconfig [ 140s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpthread.so.0 rtld(GNU_HASH) [ 140s] Processing files: libpcrecpp-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5UjYya [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd pcre-8.43 [ 140s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcrecpp [ 140s] + export LICENSEDIR [ 140s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcrecpp [ 140s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/libpcrecpp [ 140s] + exit 0 [ 140s] Provides: libpcrecpp = 8.43-7.3 libpcrecpp(armv7l-32) = 8.43-7.3 libpcrecpp.so.0 [ 140s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Requires(post): /sbin/ldconfig [ 140s] Requires(postun): /sbin/ldconfig [ 140s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.8) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 140s] Processing files: pcre-doc-8.43-7.3.noarch [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.1lHOnt [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd pcre-8.43 [ 140s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + export DOCDIR [ 140s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/doc/packages/pcre-doc [ 140s] + exit 0 [ 140s] Provides: pcre-doc = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Processing files: pcre-tools-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.jC1L1M [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd pcre-8.43 [ 140s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/pcre-tools [ 140s] + export LICENSEDIR [ 140s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/pcre-tools [ 140s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm/usr/share/licenses/pcre-tools [ 140s] + exit 0 [ 140s] Provides: pcre-tools = 8.43-7.3 pcre-tools(armv7l-32) = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 140s] Processing files: libpcre-debuginfo-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Provides: libpcre-debuginfo = 8.43-7.3 libpcre-debuginfo(armv7l-32) = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Processing files: libpcreposix-debuginfo-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Provides: libpcreposix-debuginfo = 8.43-7.3 libpcreposix-debuginfo(armv7l-32) = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Processing files: libpcrecpp-debuginfo-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] Provides: libpcrecpp-debuginfo = 8.43-7.3 libpcrecpp-debuginfo(armv7l-32) = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Processing files: pcre-tools-debuginfo-8.43-7.3.armv7l [ 140s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 140s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 140s] [ 140s] warning: File listed twice: /usr/lib/debug/.build-id [ 140s] Provides: pcre-tools-debuginfo = 8.43-7.3 pcre-tools-debuginfo(armv7l-32) = 8.43-7.3 [ 140s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 140s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm [ 140s] warning: Could not canonicalize hostname: obspw12 [ 140s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.43-7.3.src.rpm [ 141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.43-7.3.armv7l.rpm [ 141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.43-7.3.armv7l.rpm [ 141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.43-7.3.armv7l.rpm [ 141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.43-7.3.armv7l.rpm [ 141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.43-7.3.armv7l.rpm [ 141s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.43-7.3.armv7l.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-7.3.noarch.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.43-7.3.armv7l.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.43-7.3.armv7l.rpm [ 142s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.43-7.3.armv7l.rpm [ 143s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.43-7.3.armv7l.rpm [ 143s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.43-7.3.armv7l.rpm [ 143s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.uYbUx3 [ 143s] + umask 022 [ 143s] + cd /home/abuild/rpmbuild/BUILD [ 143s] + cd pcre-8.43 [ 143s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.3.arm [ 143s] + exit 0 [ 143s] ... checking for files with abuild user/group [ 143s] ... creating baselibs [ 143s] no targets for arch armv7l, nothing to do [ 143s] ... comparing built packages with the former built [ 143s] /usr/lib/build/pkg-diff.sh [ 144s] compare /.build.oldpackages/pcre-8.43-7.2.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.43-7.3.src.rpm [ 144s] This is not a prerelease project. Compare the project name. [ 144s] comparing rpmtags [ 144s] comparing RELEASE [ 144s] comparing PROVIDES [ 144s] comparing scripts [ 144s] comparing filelist [ 144s] comparing file checksum [ 144s] RPM meta information is identical [ 144s] compare /.build.oldpackages/libpcre-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.43-7.3.armv7l.rpm [ 144s] Comparing libpcre-8.43-7.2.armv7l.rpm to libpcre-8.43-7.3.armv7l.rpm [ 144s] This is not a prerelease project. Compare the project name. [ 144s] comparing rpmtags [ 144s] comparing RELEASE [ 144s] comparing PROVIDES [ 144s] comparing scripts [ 144s] comparing filelist [ 144s] comparing file checksum [ 144s] creating rename script [ 144s] RPM file checksum differs. [ 144s] Extracting packages [ 145s] /usr/lib/libpcre.so.1.2.11: only difference was in build-id or gnu_debuglink, GOOD. [ 145s] Package content is identical [ 145s] compare /.build.oldpackages/libpcre-debuginfo-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.43-7.3.armv7l.rpm [ 145s] skipping -debuginfo package [ 145s] compare /.build.oldpackages/libpcrecpp-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.43-7.3.armv7l.rpm [ 146s] Comparing libpcrecpp-8.43-7.2.armv7l.rpm to libpcrecpp-8.43-7.3.armv7l.rpm [ 146s] This is not a prerelease project. Compare the project name. [ 146s] comparing rpmtags [ 146s] comparing RELEASE [ 146s] comparing PROVIDES [ 146s] comparing scripts [ 146s] comparing filelist [ 146s] comparing file checksum [ 146s] creating rename script [ 146s] RPM file checksum differs. [ 146s] Extracting packages [ 146s] /usr/lib/libpcrecpp.so.0.0.1: only difference was in build-id or gnu_debuglink, GOOD. [ 146s] Package content is identical [ 146s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.43-7.3.armv7l.rpm [ 146s] skipping -debuginfo package [ 146s] compare /.build.oldpackages/libpcreposix-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.43-7.3.armv7l.rpm [ 146s] Comparing libpcreposix-8.43-7.2.armv7l.rpm to libpcreposix-8.43-7.3.armv7l.rpm [ 146s] This is not a prerelease project. Compare the project name. [ 146s] comparing rpmtags [ 146s] comparing RELEASE [ 146s] comparing PROVIDES [ 147s] comparing scripts [ 147s] comparing filelist [ 147s] comparing file checksum [ 147s] creating rename script [ 147s] RPM file checksum differs. [ 147s] Extracting packages [ 147s] /usr/lib/libpcreposix.so.0.0.6: only difference was in build-id or gnu_debuglink, GOOD. [ 147s] Package content is identical [ 147s] compare /.build.oldpackages/libpcreposix-debuginfo-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.43-7.3.armv7l.rpm [ 147s] skipping -debuginfo package [ 147s] compare /.build.oldpackages/pcre-debugsource-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.43-7.3.armv7l.rpm [ 147s] Comparing pcre-debugsource-8.43-7.2.armv7l.rpm to pcre-debugsource-8.43-7.3.armv7l.rpm [ 147s] This is not a prerelease project. Compare the project name. [ 147s] comparing rpmtags [ 147s] comparing RELEASE [ 147s] comparing PROVIDES [ 147s] comparing scripts [ 147s] comparing filelist [ 147s] comparing file checksum [ 147s] creating rename script [ 147s] RPM meta information is identical [ 147s] compare /.build.oldpackages/pcre-devel-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.43-7.3.armv7l.rpm [ 147s] Comparing pcre-devel-8.43-7.2.armv7l.rpm to pcre-devel-8.43-7.3.armv7l.rpm [ 148s] This is not a prerelease project. Compare the project name. [ 148s] comparing rpmtags [ 148s] comparing RELEASE [ 148s] comparing PROVIDES [ 148s] comparing scripts [ 148s] comparing filelist [ 148s] comparing file checksum [ 148s] creating rename script [ 148s] RPM meta information is identical [ 148s] compare /.build.oldpackages/pcre-devel-static-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.43-7.3.armv7l.rpm [ 148s] Comparing pcre-devel-static-8.43-7.2.armv7l.rpm to pcre-devel-static-8.43-7.3.armv7l.rpm [ 148s] This is not a prerelease project. Compare the project name. [ 148s] comparing rpmtags [ 148s] comparing RELEASE [ 148s] comparing PROVIDES [ 148s] comparing scripts [ 148s] comparing filelist [ 148s] comparing file checksum [ 148s] creating rename script [ 148s] RPM file checksum differs. [ 148s] Extracting packages [ 148s] /usr/lib/libpcre_la-pcre_byte_order.o differs in ELF section .comment [ 148s] --- /tmp/tmp.XBNoz56383/tmp.cuCEf56653 2019-10-08 19:53:58.944921506 +0000 [ 148s] +++ /tmp/tmp.XBNoz56383/tmp.WTJRD56664 2019-10-08 19:53:58.944921506 +0000 [ 148s] @@ -4,5 +4,5 @@ [ 148s] Contents of section .comment: [ 148s] 0000 00474343 3a202854 697a656e 2f4c696e .GCC: (Tizen/Lin [ 148s] 0010 61726f20 47434320 362e322e 31203230 aro GCC 6.2.1 20 [ 148s] - 0020 31362e31 32203339 2e322920 362e322e 16.12 39.2) 6.2. [ 148s] + 0020 31362e31 32203339 2e332920 362e322e 16.12 39.3) 6.2. [ 148s] 0030 31203230 31363132 313300 1 20161213. [ 148s] compare /.build.oldpackages/pcre-doc-8.43-7.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-7.3.noarch.rpm [ 149s] Comparing pcre-doc-8.43-7.2.noarch.rpm to pcre-doc-8.43-7.3.noarch.rpm [ 149s] This is not a prerelease project. Compare the project name. [ 149s] comparing rpmtags [ 149s] comparing RELEASE [ 149s] comparing PROVIDES [ 149s] comparing scripts [ 149s] comparing filelist [ 149s] comparing file checksum [ 149s] creating rename script [ 149s] RPM meta information is identical [ 149s] compare /.build.oldpackages/pcre-tools-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.43-7.3.armv7l.rpm [ 149s] Comparing pcre-tools-8.43-7.2.armv7l.rpm to pcre-tools-8.43-7.3.armv7l.rpm [ 149s] This is not a prerelease project. Compare the project name. [ 149s] comparing rpmtags [ 149s] comparing RELEASE [ 149s] comparing PROVIDES [ 149s] comparing scripts [ 149s] comparing filelist [ 149s] comparing file checksum [ 149s] creating rename script [ 149s] RPM file checksum differs. [ 149s] Extracting packages [ 150s] /usr/bin/pcregrep: only difference was in build-id or gnu_debuglink, GOOD. [ 150s] /usr/bin/pcretest: only difference was in build-id or gnu_debuglink, GOOD. [ 150s] Package content is identical [ 150s] compare /.build.oldpackages/pcre-tools-debuginfo-8.43-7.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.43-7.3.armv7l.rpm [ 150s] skipping -debuginfo package [ 150s] [ 150s] obspw12 finished "build pcre.spec" at Tue Oct 8 19:54:00 UTC 2019. [ 150s] Retried build at Tue Oct 8 21:24:53 2019 returned same result, skipped Retried build at Tue Oct 8 22:52:47 2019 returned same result, skipped