[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw05 started "build _service:gbs:nghttp2.spec" at Sun Jun 21 05:00:28 UTC 2020. [ 0s] [ 0s] Building nghttp2 for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 'bef5a51ff83db93f3cb0be479a6baf32' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:nghttp2.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:nghttp2.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:nghttp2.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libbz2... [ 1s] [7/40] preinstalling libgcc... [ 1s] [8/40] preinstalling bash... [ 1s] [9/40] preinstalling diffutils... [ 1s] [10/40] preinstalling grep... [ 1s] [11/40] preinstalling libattr... [ 1s] [12/40] preinstalling libblkid... [ 1s] [13/40] preinstalling libcap... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libelf... [ 8s] [30/40] preinstalling libmount... [ 8s] [31/40] preinstalling smack... [ 8s] [32/40] preinstalling bzip2... [ 8s] [33/40] preinstalling libmagic... [ 8s] [34/40] preinstalling libxml2... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/102] installing libmagic-data-5.37-18.18 [ 9s] [2/102] installing setup-0.9-10.30 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/102] installing filesystem-3.1-8.1 [ 9s] [4/102] installing glibc-2.30-27.2 [ 9s] [5/102] installing libatomic-9.2.0-9.2 [ 9s] [6/102] installing libbz2-1.0.8-8.24 [ 10s] [7/102] installing libgcc-9.2.0-9.2 [ 10s] [8/102] installing bash-3.2.57-6.7 [ 10s] [9/102] installing cpio-2.11-3.7 [ 10s] [10/102] installing diffutils-3.3-3.7 [ 10s] [11/102] installing findutils-4.3.8-6.370 [ 10s] [12/102] installing gdbm-1.8.3-4.269 [ 11s] [13/102] installing hostname-3.23-7.4 [ 11s] [14/102] installing libattr-2.4.47-5.623 [ 11s] [15/102] installing libblkid-2.34-17.8 [ 11s] [16/102] installing libcap-2.24-4.829 [ 12s] [17/102] installing libext2fs-1.43.4-7.3 [ 12s] [18/102] installing libfreebl3-3.34.1-6.145 [ 12s] [19/102] installing libgfortran-9.2.0-9.2 [ 13s] [20/102] installing libgomp-9.2.0-9.2 [ 13s] [21/102] installing libitm-9.2.0-9.2 [ 13s] [22/102] installing libltdl-2.4.2-5.241 [ 14s] [23/102] installing liblua-5.1.5-5.110 [ 14s] [24/102] installing liblzma-5.2.4-6.310 [ 14s] [25/102] installing libopenssl11-1.1.1g-10.11 [ 15s] [26/102] installing libpcre-8.43-7.32 [ 15s] [27/102] installing libpopt-1.16-4.256 [ 15s] [28/102] installing libsmack-1.3.1-5.387 [ 16s] [29/102] installing libsmartcols-2.34-17.8 [ 16s] [30/102] installing libsqlite-3.31.1-20.31 [ 16s] [31/102] installing libstdc++-9.2.0-9.2 [ 17s] [32/102] installing libuuid-2.34-17.8 [ 17s] [33/102] installing m4-1.4.17-4.4 [ 17s] [34/102] installing net-tools-2.0_20121208git-4.1 [ 17s] [35/102] installing nspr-4.12-4.234 [ 17s] [36/102] installing patch-2.7-3.254 [ 17s] [37/102] installing pkg-config-0.28-6.153 [ 17s] [38/102] installing sed-4.1c-4.7 [ 17s] [39/102] installing update-alternatives-1.18.15-5.4 [ 17s] [40/102] installing which-2.20-6.7 [ 18s] [41/102] installing zlib-1.2.11-5.526 [ 18s] [42/102] installing build-compare-2015.04.28-3.344 [ 18s] [43/102] installing libstdc++-devel-9.2.0-9.2 [ 18s] [44/102] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 20s] [45/102] installing terminfo-base-full-6.1_20191207-12.163 [ 20s] [46/102] installing cpp-9.2.0-9.2 [ 21s] [47/102] installing gcc-c++-9.2.0-9.2 [ 21s] [48/102] installing xz-devel-5.2.4-6.310 [ 21s] [49/102] installing binutils-2.33.1-20.3 [ 22s] [50/102] installing coreutils-6.9-4.46 [ 22s] [51/102] installing db4-4.8.30.NC-4.165 [ 22s] [52/102] installing gawk-3.1.5-6.4 [ 22s] [53/102] installing grep-2.5.2-6.7 [ 22s] [54/102] installing libacl-2.2.52-5.642 [ 22s] [55/102] installing libcc1-9.2.0-9.2 [ 23s] [56/102] installing libelf-0.178-6.5 [ 23s] [57/102] installing libmount-2.34-17.8 [ 23s] [58/102] installing libubsan-9.2.0-9.2 [ 24s] [59/102] installing make-4.0-5.46 [ 24s] [60/102] installing nss-certs-3.34.1-6.145 [ 24s] [61/102] installing smack-1.3.1-5.387 [ 24s] [62/102] installing bzip2-1.0.8-8.24 [ 24s] [63/102] installing libfdisk-2.34-17.8 [ 24s] [64/102] installing libmagic-5.37-18.18 [ 25s] [65/102] installing libxml2-2.9.10-11.4 [ 25s] [66/102] installing xz-5.2.4-6.310 [ 25s] [67/102] installing linux-glibc-devel-3.10-10.66 [ 26s] [68/102] installing file-5.37-18.18 [ 26s] [69/102] installing glibc-locale-2.30-27.2 [ 26s] [70/102] installing tar-1.17-4.8 [ 26s] [71/102] installing gzip-1.3.12-7.595 [ 26s] [72/102] installing libncurses6-6.1_20191207-12.163 [ 27s] [73/102] installing pam-1.1.6-8.5 [ 27s] [74/102] installing perl-5.30.0-10.88 [ 29s] [75/102] installing tzdata-2019c-12.4 [ 29s] [76/102] installing libdw-0.178-6.5 [ 30s] [77/102] installing gcc-9.2.0-9.2 [ 30s] [78/102] installing build-mkbaselibs-20120927-3.1 [ 30s] [79/102] installing libncurses-6.1_20191207-12.163 [ 30s] [80/102] installing glibc-devel-2.30-27.2 [ 31s] [81/102] installing qemu-accel-x86_64-armv7l-0.4-17.2 [ 36s] [82/102] installing autoconf-2.69-5.329 [ 37s] [83/102] installing less-466-8.12 [ 37s] [84/102] installing libreadline-5.2-5.163 [ 37s] [85/102] installing procps-ng-3.3.15-9.5 [ 37s] [86/102] installing libasm-0.178-6.5 [ 37s] [87/102] installing ncurses-devel-6.1_20191207-12.163 [ 38s] [88/102] installing readline-devel-5.2-5.163 [ 38s] [89/102] installing automake-1.15.1-6.486 [ 38s] [90/102] installing zlib-devel-1.2.11-5.526 [ 38s] [91/102] installing libxml2-tools-2.9.10-11.4 [ 38s] [92/102] installing build-20120927-3.1 [ 38s] [93/102] installing elfutils-0.178-6.5 [ 38s] [94/102] installing util-linux-2.34-17.8 [ 38s] [95/102] installing libopenssl1.1-devel-1.1.1g-10.11 [ 38s] [96/102] installing libtool-2.4.2-5.241 [ 38s] [97/102] installing util-linux-su-2.34-17.8 [ 38s] [98/102] installing libxml2-devel-2.9.10-11.4 [ 38s] [99/102] installing nss-3.34.1-6.145 [ 39s] [100/102] installing libsoftokn3-3.34.1-6.145 [ 39s] [101/102] installing rpm-4.11.0.1-17.11 [ 40s] [102/102] installing rpm-build-4.11.0.1-17.11 [ 40s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 40s] now finalizing build dir... [ 40s] Running build time source services... [ 40s] Warning: spec file parser line 14: can't expand %(...) [ 40s] build target is armv7l-tizen-linux [ 40s] ----------------------------------------------------------------- [ 40s] I have the following modifications for nghttp2.spec: [ 40s] 6c6 [ 40s] < Release: 1 [ 40s] --- [ 40s] > Release: 13.1 [ 40s] ----------------------------------------------------------------- [ 40s] ----- building nghttp2.spec (user abuild) [ 40s] ----------------------------------------------------------------- [ 40s] ----------------------------------------------------------------- [ 41s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/bef5a51ff83db93f3cb0be479a6baf32-nghttp2' -ba /home/abuild/rpmbuild/SOURCES/nghttp2.spec [ 41s] Building target platforms: armv7l-tizen-linux [ 41s] Building for target armv7l-tizen-linux [ 41s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uQ3Oku [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + rm -rf nghttp2-1.41.0 [ 41s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/nghttp2-1.41.0.tar.gz [ 41s] + /bin/tar -xf - [ 41s] + STATUS=0 [ 41s] + '[' 0 -ne 0 ']' [ 41s] + cd nghttp2-1.41.0 [ 41s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 41s] + echo 'Patch #0 (3ae7c53-to-9be3311.diff):' [ 41s] Patch #0 (3ae7c53-to-9be3311.diff): [ 41s] + /bin/cat /home/abuild/rpmbuild/SOURCES/3ae7c53-to-9be3311.diff [ 41s] + /bin/patch -p1 --fuzz=2 [ 41s] patching file configure.ac [ 41s] patching file nghttp2.manifest [ 41s] patching file third-party/http-parser/test.c [ 41s] + exit 0 [ 41s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Mgonjx [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + cd nghttp2-1.41.0 [ 41s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 41s] + LANG=C [ 41s] + export LANG [ 41s] + unset DISPLAY [ 41s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 41s] + export CFLAGS [ 41s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 41s] + export CXXFLAGS [ 41s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 41s] + export FFLAGS [ 41s] + LDFLAGS= [ 41s] + export LDFLAGS [ 41s] + autoreconf -i [ 57s] libtoolize: `./ltmain.sh' is newer: use `--force' to overwrite [ 57s] libtoolize: `m4/libtool.m4' is newer: use `--force' to overwrite [ 57s] libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite [ 57s] libtoolize: `m4/ltversion.m4' is newer: use `--force' to overwrite [ 86s] + automake [ 97s] + autoconf [ 101s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 101s] + export CFLAGS [ 101s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 101s] + export CXXFLAGS [ 101s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 101s] + export FFLAGS [ 101s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-xmltest [ 102s] configure: WARNING: unrecognized options: --disable-xmltest [ 102s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 102s] checking whether the C compiler works... yes [ 102s] checking for C compiler default output file name... a.out [ 102s] checking for suffix of executables... [ 102s] checking whether we are cross compiling... no [ 102s] checking for suffix of object files... o [ 102s] checking whether we are using the GNU C compiler... yes [ 102s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 102s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 102s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 102s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 102s] checking for grep that handles long lines and -e... /bin/grep [ 102s] checking for egrep... /bin/grep -E [ 102s] checking for ANSI C header files... yes [ 102s] checking for sys/types.h... yes [ 102s] checking for sys/stat.h... yes [ 102s] checking for stdlib.h... yes [ 102s] checking for string.h... yes [ 102s] checking for memory.h... yes [ 102s] checking for strings.h... yes [ 102s] checking for inttypes.h... yes [ 102s] checking for stdint.h... yes [ 103s] checking for unistd.h... yes [ 103s] checking minix/config.h usability... no [ 103s] checking minix/config.h presence... no [ 103s] checking for minix/config.h... no [ 103s] checking whether it is safe to define __EXTENSIONS__... yes [ 103s] checking build system type... armv7l-tizen-linux-gnueabi [ 103s] checking host system type... armv7l-tizen-linux-gnueabi [ 103s] checking how to print strings... printf [ 103s] checking for a sed that does not truncate output... /bin/sed [ 103s] checking for fgrep... /bin/grep -F [ 103s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 103s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 103s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 103s] checking the name lister (/bin/nm -B) interface... BSD nm [ 103s] checking whether ln -s works... yes [ 103s] checking the maximum length of command line arguments... 1572864 [ 103s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 103s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 103s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 103s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 103s] checking for objdump... objdump [ 103s] checking how to recognize dependent libraries... pass_all [ 103s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 103s] checking for dlltool... no [ 103s] checking how to associate runtime and link libraries... printf %s\n [ 103s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 103s] checking for ar... ar [ 103s] checking for archiver @FILE support... @ [ 103s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 103s] checking for strip... strip [ 103s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 103s] checking for ranlib... ranlib [ 103s] checking for gawk... gawk [ 103s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 103s] checking for sysroot... no [ 103s] checking for a working dd... /bin/dd [ 103s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 103s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 103s] checking for mt... no [ 103s] checking if : is a manifest tool... no [ 103s] checking for dlfcn.h... yes [ 103s] checking for objdir... .libs [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 103s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 103s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 103s] checking whether -lc should be explicitly linked in... no [ 103s] checking dynamic linker characteristics... GNU/Linux ld.so [ 103s] checking how to hardcode library paths into programs... immediate [ 103s] checking whether stripping libraries is possible... yes [ 103s] checking if libtool supports shared libraries... yes [ 103s] checking whether to build shared libraries... yes [ 103s] checking whether to build static libraries... no [ 103s] checking target system type... armv7l-tizen-linux-gnueabi [ 103s] checking for a BSD-compatible install... /bin/install -c [ 103s] checking whether build environment is sane... yes [ 103s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 103s] checking whether make sets $(MAKE)... yes [ 103s] checking for style of include used by make... GNU [ 103s] checking whether make supports nested variables... yes [ 103s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 103s] checking whether make supports nested variables... (cached) yes [ 103s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 103s] checking whether we are using the GNU C compiler... (cached) yes [ 103s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 103s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 103s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 103s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 104s] checking whether we are using the GNU C++ compiler... yes [ 104s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 104s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 104s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 104s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 104s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 104s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 104s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 104s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 104s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 104s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 104s] checking how to hardcode library paths into programs... immediate [ 104s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 104s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 104s] checking whether ln -s works... yes [ 104s] checking whether make sets $(MAKE)... (cached) yes [ 104s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 104s] checking pkg-config is at least version 0.20... yes [ 104s] checking for a Python interpreter with version >= 2.7... none [ 104s] checking for python... no [ 104s] configure: WARNING: Cannot find python in your system path [ 104s] checking for cython.py... no [ 104s] checking for cython... no [ 104s] checking whether armv7l-tizen-linux-gnueabi-g++ supports C++14 features with -std=c++14... yes [ 105s] checking whether std::future is available... yes [ 105s] checking whether std::map::emplace is available... yes [ 105s] checking whether std::atomic_* overloads for std::shared_ptr are available... yes [ 105s] checking whether thread_local storage class specifier is available.... yes [ 106s] checking for ZLIB... yes [ 106s] checking for library containing dlopen... -ldl [ 106s] checking for CUNIT... no [ 106s] configure: WARNING: No package 'cunit' found [ 106s] checking for CU_initialize_registry in -lcunit... no [ 106s] checking for ev_time in -lev... no [ 106s] checking for OPENSSL... yes [ 106s] checking for LIBCARES... no [ 106s] configure: No package 'libcares' found [ 106s] checking for LIBEVENT_OPENSSL... no [ 106s] configure: No package 'libevent_openssl' found [ 106s] checking for JANSSON... no [ 106s] configure: No package 'jansson' found [ 106s] checking for SYSTEMD... no [ 106s] configure: No package 'libsystemd' found [ 107s] checking for LIBXML2... yes [ 107s] checking for library containing malloc_stats_print... no [ 107s] checking for library containing je_malloc_stats_print... no [ 107s] checking whether to enable assertions... yes [ 107s] checking arpa/inet.h usability... yes [ 107s] checking arpa/inet.h presence... yes [ 107s] checking for arpa/inet.h... yes [ 107s] checking fcntl.h usability... yes [ 107s] checking fcntl.h presence... yes [ 107s] checking for fcntl.h... yes [ 107s] checking for inttypes.h... (cached) yes [ 107s] checking limits.h usability... yes [ 107s] checking limits.h presence... yes [ 107s] checking for limits.h... yes [ 107s] checking netdb.h usability... yes [ 107s] checking netdb.h presence... yes [ 107s] checking for netdb.h... yes [ 107s] checking netinet/in.h usability... yes [ 107s] checking netinet/in.h presence... yes [ 107s] checking for netinet/in.h... yes [ 107s] checking pwd.h usability... yes [ 107s] checking pwd.h presence... yes [ 107s] checking for pwd.h... yes [ 107s] checking stddef.h usability... yes [ 107s] checking stddef.h presence... yes [ 107s] checking for stddef.h... yes [ 107s] checking for stdint.h... (cached) yes [ 107s] checking for stdlib.h... (cached) yes [ 107s] checking for string.h... (cached) yes [ 107s] checking sys/socket.h usability... yes [ 107s] checking sys/socket.h presence... yes [ 107s] checking for sys/socket.h... yes [ 107s] checking sys/time.h usability... yes [ 107s] checking sys/time.h presence... yes [ 107s] checking for sys/time.h... yes [ 107s] checking syslog.h usability... yes [ 107s] checking syslog.h presence... yes [ 107s] checking for syslog.h... yes [ 107s] checking time.h usability... yes [ 107s] checking time.h presence... yes [ 107s] checking for time.h... yes [ 107s] checking for unistd.h... (cached) yes [ 108s] checking for size_t... yes [ 108s] checking for ssize_t... yes [ 108s] checking for uint8_t... yes [ 108s] checking for uint16_t... yes [ 108s] checking for uint32_t... yes [ 108s] checking for uint64_t... yes [ 108s] checking for int8_t... yes [ 108s] checking for int16_t... yes [ 108s] checking for int32_t... yes [ 108s] checking for int64_t... yes [ 108s] checking for off_t... yes [ 108s] checking for pid_t... yes [ 108s] checking for uid_t in sys/types.h... yes [ 108s] checking for ptrdiff_t... yes [ 108s] checking whether byte ordering is bigendian... no [ 108s] checking for inline... inline [ 108s] checking for special C compiler options needed for large files... no [ 108s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 109s] checking for struct tm.tm_gmtoff... yes [ 109s] checking for struct sockaddr_in.sin_len... no [ 109s] checking for struct sockaddr_in6.sin6_len... no [ 109s] checking size of int *... 4 [ 109s] checking size of time_t... 4 [ 109s] checking for unistd.h... (cached) yes [ 109s] checking for working chown... yes [ 109s] checking for error_at_line... yes [ 109s] checking vfork.h usability... no [ 109s] checking vfork.h presence... no [ 109s] checking for vfork.h... no [ 109s] checking for fork... yes [ 109s] checking for vfork... yes [ 109s] checking for working fork... yes [ 109s] checking for working vfork... (cached) yes [ 109s] checking whether strerror_r is declared... yes [ 109s] checking for strerror_r... yes [ 109s] checking whether strerror_r returns char *... yes [ 109s] checking for working strnlen... yes [ 109s] checking for _Exit... yes [ 109s] checking for accept4... yes [ 110s] checking for dup2... yes [ 110s] checking for getcwd... yes [ 110s] checking for getpwnam... yes [ 110s] checking for localtime_r... yes [ 110s] checking for memchr... yes [ 110s] checking for memmove... yes [ 110s] checking for memset... yes [ 110s] checking for mkostemp... yes [ 110s] checking for socket... yes [ 110s] checking for sqrt... no [ 110s] checking for strchr... yes [ 110s] checking for strdup... yes [ 110s] checking for strerror... yes [ 110s] checking for strndup... yes [ 110s] checking for strstr... yes [ 110s] checking for strtol... yes [ 110s] checking for strtoul... yes [ 110s] checking for timegm... yes [ 110s] checking for timerfd_create... yes [ 110s] checking whether initgroups is declared... yes [ 110s] checking whether C compiler accepts -fvisibility=hidden... yes [ 111s] checking that generated files are newer than configure... done [ 111s] configure: creating ./config.status [ 111s] config.status: creating Makefile [ 111s] config.status: creating lib/Makefile [ 111s] config.status: creating lib/libnghttp2.pc [ 111s] config.status: creating lib/includes/Makefile [ 111s] config.status: creating lib/includes/nghttp2/nghttp2ver.h [ 111s] config.status: creating tests/Makefile [ 111s] config.status: creating tests/testdata/Makefile [ 111s] config.status: creating third-party/Makefile [ 111s] config.status: creating src/Makefile [ 111s] config.status: creating src/includes/Makefile [ 111s] config.status: creating src/libnghttp2_asio.pc [ 111s] config.status: creating examples/Makefile [ 112s] config.status: creating python/Makefile [ 112s] config.status: creating python/setup.py [ 112s] config.status: creating integration-tests/Makefile [ 112s] config.status: creating integration-tests/config.go [ 112s] config.status: creating integration-tests/setenv [ 112s] config.status: creating doc/Makefile [ 112s] config.status: creating doc/conf.py [ 112s] config.status: creating doc/index.rst [ 112s] config.status: creating doc/package_README.rst [ 112s] config.status: creating doc/tutorial-client.rst [ 112s] config.status: creating doc/tutorial-server.rst [ 112s] config.status: creating doc/tutorial-hpack.rst [ 112s] config.status: creating doc/nghttpx-howto.rst [ 112s] config.status: creating doc/h2load-howto.rst [ 112s] config.status: creating doc/libnghttp2_asio.rst [ 112s] config.status: creating doc/python-apiref.rst [ 112s] config.status: creating doc/building-android-binary.rst [ 112s] config.status: creating doc/nghttp2.h.rst [ 112s] config.status: creating doc/nghttp2ver.h.rst [ 112s] config.status: creating doc/asio_http2.h.rst [ 112s] config.status: creating doc/asio_http2_server.h.rst [ 112s] config.status: creating doc/asio_http2_client.h.rst [ 112s] config.status: creating doc/contribute.rst [ 112s] config.status: creating contrib/Makefile [ 112s] config.status: creating script/Makefile [ 112s] config.status: creating config.h [ 112s] config.status: executing libtool commands [ 112s] config.status: executing depfiles commands [ 115s] configure: WARNING: unrecognized options: --disable-xmltest [ 115s] configure: summary of build options: [ 115s] [ 115s] Package version: 1.41.0 [ 115s] Library version: 34:0:20 [ 115s] Install prefix: /usr [ 115s] System types: [ 115s] Build: armv7l-tizen-linux-gnueabi [ 115s] Host: armv7l-tizen-linux-gnueabi [ 115s] Target: armv7l-tizen-linux-gnueabi [ 115s] Compiler: [ 115s] C compiler: armv7l-tizen-linux-gnueabi-gcc [ 115s] CFLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g [ 115s] LDFLAGS: [ 115s] C++ compiler: armv7l-tizen-linux-gnueabi-g++ -std=c++14 [ 115s] CXXFLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g [ 115s] CXXCPP: armv7l-tizen-linux-gnueabi-g++ -E -std=c++14 [ 115s] C preprocessor: armv7l-tizen-linux-gnueabi-gcc -E [ 115s] CPPFLAGS: [ 115s] WARNCFLAGS: [ 115s] WARNCXXFLAGS: [ 115s] CXX1XCXXFLAGS: [ 115s] EXTRACFLAG: -fvisibility=hidden [ 115s] LIBS: [ 115s] Library: [ 115s] Shared: yes [ 115s] Static: no [ 115s] Python: [ 115s] Python: [ 115s] PYTHON_VERSION: [ 115s] pyexecdir: [ 115s] Python-dev: no [ 115s] PYTHON_CPPFLAGS: [ 115s] PYTHON_LDFLAGS: [ 115s] Cython: [ 115s] Test: [ 115s] CUnit: no (CFLAGS='' LIBS='') [ 115s] Failmalloc: yes [ 115s] Libs: [ 115s] OpenSSL: yes (CFLAGS='' LIBS='-lssl -lcrypto ') [ 115s] Libxml2: yes (CFLAGS='-I/usr/include/libxml2 ' LIBS='-lxml2 ') [ 115s] Libev: no (CFLAGS='' LIBS='') [ 115s] Libc-ares: no (CFLAGS='' LIBS='') [ 115s] Libevent(SSL): no (CFLAGS='' LIBS='') [ 115s] Jansson: no (CFLAGS='' LIBS='') [ 115s] Jemalloc: no (LIBS='') [ 115s] Zlib: yes (CFLAGS='' LIBS='-L/lib -lz ') [ 115s] Systemd: no (CFLAGS='' LIBS='') [ 115s] Boost CPPFLAGS: [ 115s] Boost LDFLAGS: [ 115s] Boost::ASIO: [ 115s] Boost::System: [ 115s] Boost::Thread: [ 115s] Third-party: [ 115s] http-parser: no [ 115s] MRuby: no (CFLAGS='' LIBS='') [ 115s] Neverbleed: no [ 115s] Features: [ 115s] Applications: no [ 115s] HPACK tools: no [ 115s] Libnghttp2_asio:no [ 115s] Examples: no [ 115s] Python bindings:no [ 115s] Threading: yes [ 115s] [ 115s] + /bin/make -j8 [ 115s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/missing autoheader) [ 117s] rm -f stamp-h1 [ 117s] touch config.h.in [ 117s] cd . && /bin/sh ./config.status config.h [ 118s] config.status: creating config.h [ 118s] config.status: config.h is unchanged [ 118s] /bin/make all-recursive [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 118s] Making all in lib [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 118s] Making all in includes [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib/includes' [ 118s] make[3]: Nothing to be done for 'all'. [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib/includes' [ 118s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 118s] CC nghttp2_pq.lo [ 118s] CC nghttp2_map.lo [ 118s] CC nghttp2_queue.lo [ 118s] CC nghttp2_frame.lo [ 118s] CC nghttp2_buf.lo [ 118s] CC nghttp2_session.lo [ 118s] CC nghttp2_stream.lo [ 118s] CC nghttp2_outbound_item.lo [ 118s] CC nghttp2_submit.lo [ 118s] CC nghttp2_helper.lo [ 118s] CC nghttp2_npn.lo [ 118s] CC nghttp2_hd.lo [ 118s] CC nghttp2_hd_huffman.lo [ 118s] CC nghttp2_hd_huffman_data.lo [ 118s] CC nghttp2_version.lo [ 118s] CC nghttp2_priority_spec.lo [ 118s] CC nghttp2_option.lo [ 118s] CC nghttp2_callbacks.lo [ 118s] CC nghttp2_mem.lo [ 118s] CC nghttp2_http.lo [ 118s] CC nghttp2_rcbuf.lo [ 118s] CC nghttp2_debug.lo [ 120s] CCLD libnghttp2.la [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] Making all in third-party [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/third-party' [ 120s] make[2]: Nothing to be done for 'all'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/third-party' [ 120s] Making all in src [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] Making all in includes [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src/includes' [ 120s] make[3]: Nothing to be done for 'all'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src/includes' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] make[3]: Nothing to be done for 'all-am'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] Making all in examples [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/examples' [ 120s] make[2]: Nothing to be done for 'all'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/examples' [ 120s] Making all in python [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/python' [ 120s] make[2]: Nothing to be done for 'all'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/python' [ 120s] Making all in tests [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] Making all in testdata [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests/testdata' [ 120s] make[3]: Nothing to be done for 'all'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests/testdata' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] make[3]: Nothing to be done for 'all-am'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] Making all in integration-tests [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/integration-tests' [ 120s] make[2]: Nothing to be done for 'all'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/integration-tests' [ 120s] Making all in doc [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/doc' [ 120s] make[2]: Nothing to be done for 'all'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/doc' [ 120s] Making all in contrib [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/contrib' [ 120s] rm -f nghttpx-init nghttpx-init.tmp [ 120s] sed -e 's|@bindir[@]|/usr/bin|g' nghttpx.service.in > nghttpx.service [ 120s] sed -e 's|@bindir[@]|/usr/bin|g' nghttpx-upstart.conf.in > nghttpx-upstart.conf [ 120s] sed -e 's|@bindir[@]|/usr/bin|g' nghttpx-init.in > nghttpx-init.tmp [ 120s] chmod +x nghttpx-init.tmp [ 120s] mv nghttpx-init.tmp nghttpx-init [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/contrib' [ 120s] Making all in script [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/script' [ 120s] make[2]: Nothing to be done for 'all'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/script' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] + exit 0 [ 120s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Bm4u6x [ 120s] + umask 022 [ 120s] + cd /home/abuild/rpmbuild/BUILD [ 120s] + cd nghttp2-1.41.0 [ 120s] + LANG=C [ 120s] + export LANG [ 120s] + unset DISPLAY [ 120s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 120s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 120s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 120s] + /bin/make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 120s] Making install in lib [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] Making install in includes [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib/includes' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib/includes' [ 120s] make[3]: Nothing to be done for 'install-exec-am'. [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/include' [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/include/nghttp2' [ 120s] /bin/install -c -m 644 nghttp2/nghttp2.h nghttp2/nghttp2ver.h '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/include/nghttp2' [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib/includes' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib/includes' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib' [ 120s] /bin/sh ../libtool --mode=install /bin/install -c libnghttp2.la '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib' [ 120s] libtool: install: /bin/install -c .libs/libnghttp2.so.14.20.0 /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib/libnghttp2.so.14.20.0 [ 120s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib && { ln -s -f libnghttp2.so.14.20.0 libnghttp2.so.14 || { rm -f libnghttp2.so.14 && ln -s libnghttp2.so.14.20.0 libnghttp2.so.14; }; }) [ 120s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib && { ln -s -f libnghttp2.so.14.20.0 libnghttp2.so || { rm -f libnghttp2.so && ln -s libnghttp2.so.14.20.0 libnghttp2.so; }; }) [ 120s] libtool: install: /bin/install -c .libs/libnghttp2.lai /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib/libnghttp2.la [ 120s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib/pkgconfig' [ 120s] /bin/install -c -m 644 libnghttp2.pc '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib/pkgconfig' [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/lib' [ 120s] Making install in third-party [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/third-party' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/third-party' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] make[2]: Nothing to be done for 'install-data-am'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/third-party' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/third-party' [ 120s] Making install in src [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] Making install in includes [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src/includes' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src/includes' [ 120s] make[3]: Nothing to be done for 'install-exec-am'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src/includes' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src/includes' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/bin' [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/src' [ 120s] Making install in examples [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/examples' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/examples' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] make[2]: Nothing to be done for 'install-data-am'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/examples' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/examples' [ 120s] Making install in python [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/python' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/python' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] make[2]: Nothing to be done for 'install-data-am'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/python' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/python' [ 120s] Making install in tests [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] Making install in testdata [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests/testdata' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests/testdata' [ 120s] make[3]: Nothing to be done for 'install-exec-am'. [ 120s] make[3]: Nothing to be done for 'install-data-am'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests/testdata' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests/testdata' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] make[3]: Nothing to be done for 'install-exec-am'. [ 120s] make[3]: Nothing to be done for 'install-data-am'. [ 120s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/tests' [ 120s] Making install in integration-tests [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/integration-tests' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/integration-tests' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] make[2]: Nothing to be done for 'install-data-am'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/integration-tests' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/integration-tests' [ 120s] Making install in doc [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/doc' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/doc' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/man/man1' [ 120s] /bin/install -c -m 644 nghttp.1 nghttpd.1 nghttpx.1 h2load.1 '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/man/man1' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/doc' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/doc' [ 120s] Making install in contrib [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/contrib' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/contrib' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] make[2]: Nothing to be done for 'install-data-am'. [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/contrib' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/contrib' [ 120s] Making install in script [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/script' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/script' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/nghttp2' [ 120s] /bin/install -c fetch-ocsp-response '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/nghttp2' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/script' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/script' [ 120s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] make[2]: Nothing to be done for 'install-exec-am'. [ 120s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/doc/nghttp2' [ 120s] /bin/install -c -m 644 README.rst '/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/doc/nghttp2' [ 120s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/nghttp2-1.41.0' [ 120s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/nghttp2-1.41.0 [ 120s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/lib/libnghttp2.so.14.20.0 [ 121s] 1801 blocks [ 121s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/nghttp2-debuginfo.manifest [ 121s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nghttp2-1.41.0/nghttp2-debugsource.manifest [ 121s] + /usr/lib/rpm/check-buildroot [ 121s] + /usr/lib/rpm//brp-compress [ 121s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 121s] + /usr/lib/rpm/brp-python-hardlink [ 121s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 121s] Processing files: nghttp2-1.41.0-13.1.armv7l [ 121s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 121s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 121s] [ 121s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Uv9nFt [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd nghttp2-1.41.0 [ 121s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/licenses/nghttp2 [ 121s] + export LICENSEDIR [ 121s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/licenses/nghttp2 [ 121s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm/usr/share/licenses/nghttp2 [ 121s] + exit 0 [ 121s] Provides: libnghttp2.so.14 nghttp2 = 1.41.0-13.1 nghttp2(armv7l-32) = 1.41.0-13.1 [ 121s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 121s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 121s] Requires(post): /sbin/ldconfig [ 121s] Requires(postun): /sbin/ldconfig [ 121s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libnghttp2.so.14 rtld(GNU_HASH) [ 121s] Processing files: nghttp2-debugsource-1.41.0-13.1.armv7l [ 121s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 121s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 121s] [ 121s] Provides: nghttp2-debugsource = 1.41.0-13.1 nghttp2-debugsource(armv7l-32) = 1.41.0-13.1 [ 121s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 121s] Processing files: nghttp2-devel-1.41.0-13.1.armv7l [ 121s] Provides: nghttp2-devel = 1.41.0-13.1 nghttp2-devel(armv7l-32) = 1.41.0-13.1 pkgconfig(libnghttp2) = 1.41.0 [ 121s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 121s] Requires: /usr/bin/pkg-config libnghttp2.so.14 [ 121s] Processing files: nghttp2-debuginfo-1.41.0-13.1.armv7l [ 121s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 121s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 121s] [ 121s] Provides: nghttp2-debuginfo = 1.41.0-13.1 nghttp2-debuginfo(armv7l-32) = 1.41.0-13.1 [ 121s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 121s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 121s] warning: Installed (but unpackaged) file(s) found: [ 121s] /usr/share/man/man1/h2load.1.gz [ 121s] /usr/share/man/man1/nghttp.1.gz [ 121s] /usr/share/man/man1/nghttpd.1.gz [ 121s] /usr/share/man/man1/nghttpx.1.gz [ 121s] /usr/share/nghttp2/fetch-ocsp-response [ 121s] warning: Could not canonicalize hostname: obspw05 [ 121s] Wrote: /home/abuild/rpmbuild/SRPMS/nghttp2-1.41.0-13.1.src.rpm [ 121s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-1.41.0-13.1.armv7l.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-debugsource-1.41.0-13.1.armv7l.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-devel-1.41.0-13.1.armv7l.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-debuginfo-1.41.0-13.1.armv7l.rpm [ 122s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.KgLQAu [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd nghttp2-1.41.0 [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/nghttp2-1.41.0-13.1.arm [ 122s] + exit 0 [ 122s] ... checking for files with abuild user/group [ 122s] ... creating baselibs [ 123s] ... comparing built packages with the former built [ 123s] /usr/lib/build/pkg-diff.sh [ 123s] compare /.build.oldpackages/nghttp2-1.40.0-12.1.src.rpm /home/abuild/rpmbuild/SRPMS/nghttp2-1.41.0-13.1.src.rpm [ 123s] This is not a prerelease project. Compare the project name. [ 123s] comparing rpmtags [ 123s] comparing RELEASE [ 123s] comparing PROVIDES [ 123s] comparing scripts [ 123s] comparing filelist [ 123s] comparing file checksum [ 123s] RPM meta information is identical [ 123s] compare /.build.oldpackages/nghttp2-1.40.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-1.41.0-13.1.armv7l.rpm [ 123s] Comparing nghttp2-1.40.0-12.1.armv7l.rpm to nghttp2-1.41.0-13.1.armv7l.rpm [ 123s] This is not a prerelease project. Compare the project name. [ 123s] comparing rpmtags [ 123s] --- /tmp/tmp.vSvrw64894/tmp.fkvpa64912 2020-06-21 05:02:31.724087566 +0000 [ 123s] +++ /tmp/tmp.vSvrw64894/tmp.DevHG64914 2020-06-21 05:02:31.732087237 +0000 [ 123s] @@ -1,4 +1,4 @@ [ 123s] -nghttp2 1.40.0 (none) [ 123s] +nghttp2 1.41.0 (none) [ 123s] This is an experimental implementation of Hypertext Transfer Protocol version 2. [ 123s] [ 123s] tizen [ 123s] @@ -8,4 +8,4 @@ [ 123s] cpio xz 5T [ 123s] [ 123s] (none) (none) (none) [ 123s] -obs://build.tizen.org/Tizen:Base/standard/9275b54013abddf3ae859162ad940ca9-nghttp2 Tizen:Base [ 123s] +obs://build.tizen.org/Tizen:Base/standard/bef5a51ff83db93f3cb0be479a6baf32-nghttp2 Tizen:Base [ 123s] RPM meta information is different [ 123s] compare /.build.oldpackages/nghttp2-debuginfo-1.40.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-debuginfo-1.41.0-13.1.armv7l.rpm [ 123s] skipping -debuginfo package [ 123s] compare /.build.oldpackages/nghttp2-debugsource-1.40.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-debugsource-1.41.0-13.1.armv7l.rpm [ 123s] Comparing nghttp2-debugsource-1.40.0-12.1.armv7l.rpm to nghttp2-debugsource-1.41.0-13.1.armv7l.rpm [ 123s] This is not a prerelease project. Compare the project name. [ 123s] comparing rpmtags [ 123s] --- /tmp/tmp.mUXzg64934/tmp.JDpLW64952 2020-06-21 05:02:31.956078013 +0000 [ 123s] +++ /tmp/tmp.mUXzg64934/tmp.zFOfP64954 2020-06-21 05:02:31.964077684 +0000 [ 123s] @@ -1,4 +1,4 @@ [ 123s] -nghttp2-debugsource 1.40.0 (none) [ 123s] +nghttp2-debugsource 1.41.0 (none) [ 123s] Debug sources for package nghttp2 [ 123s] This package provides debug sources for package nghttp2. [ 123s] Debug sources are useful when developing applications that use this [ 123s] @@ -10,4 +10,4 @@ [ 123s] cpio xz 5T [ 123s] [ 123s] (none) (none) (none) [ 123s] -obs://build.tizen.org/Tizen:Base/standard/9275b54013abddf3ae859162ad940ca9-nghttp2 Tizen:Base [ 123s] +obs://build.tizen.org/Tizen:Base/standard/bef5a51ff83db93f3cb0be479a6baf32-nghttp2 Tizen:Base [ 123s] RPM meta information is different [ 123s] compare /.build.oldpackages/nghttp2-devel-1.40.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/nghttp2-devel-1.41.0-13.1.armv7l.rpm [ 124s] Comparing nghttp2-devel-1.40.0-12.1.armv7l.rpm to nghttp2-devel-1.41.0-13.1.armv7l.rpm [ 124s] This is not a prerelease project. Compare the project name. [ 124s] comparing rpmtags [ 124s] --- /tmp/tmp.YXmke64972/tmp.uvlrh64990 2020-06-21 05:02:32.176068956 +0000 [ 124s] +++ /tmp/tmp.YXmke64972/tmp.xivQD64992 2020-06-21 05:02:32.184068626 +0000 [ 124s] @@ -1,4 +1,4 @@ [ 124s] -nghttp2-devel 1.40.0 (none) [ 124s] +nghttp2-devel 1.41.0 (none) [ 124s] Development files for nghttp2 [ 124s] The nghttp2-devel package contains libraries and header files for [ 124s] developing applications that use nghttp2. [ 124s] @@ -9,4 +9,4 @@ [ 124s] cpio xz 5T [ 124s] [ 124s] (none) (none) (none) [ 124s] -obs://build.tizen.org/Tizen:Base/standard/9275b54013abddf3ae859162ad940ca9-nghttp2 Tizen:Base [ 124s] +obs://build.tizen.org/Tizen:Base/standard/bef5a51ff83db93f3cb0be479a6baf32-nghttp2 Tizen:Base [ 124s] RPM meta information is different [ 124s] [ 124s] obspw05 finished "build nghttp2.spec" at Sun Jun 21 05:02:32 UTC 2020. [ 124s] Retried build at Sun Jun 28 03:55:47 2020 returned same result, skipped Retried build at Mon Jul 6 05:00:06 2020 returned same result, skipped Retried build at Thu Jul 23 05:43:02 2020 returned same result, skipped Retried build at Wed Aug 5 00:27:15 2020 returned same result, skipped Retried build at Sun Aug 9 13:30:32 2020 returned same result, skipped Retried build at Fri Sep 18 10:44:30 2020 returned same result, skipped Retried build at Mon Sep 28 06:51:01 2020 returned same result, skipped Retried build at Tue Oct 6 05:50:03 2020 returned same result, skipped