[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw16 started "build _service:gbs:stability-monitor-kmod-rpi3.spec" at Fri May 6 06:14:38 UTC 2022. [ 0s] [ 0s] Building stability-monitor-kmod-rpi3 for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '2c2843ddca918e398029127bf8accfd1' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-aarch64 postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/103] installing libmagic-data-5.41-6.304 [ 12s] [2/103] installing setup-0.9-6.8 [ 12s] [3/103] installing filesystem-3.1-4.1 [ 12s] [4/103] installing glibc-2.30-14.2 [ 12s] [5/103] installing bash-3.2.57-5.1 [ 12s] [6/103] installing cpio-2.8-5.3 [ 12s] [7/103] installing diffutils-3.3-4.3 [ 12s] [8/103] installing findutils-4.3.8-5.371 [ 12s] [9/103] installing gdbm-1.8.3-3.671 [ 13s] [10/103] installing hostname-3.23-3.3 [ 13s] [11/103] installing libatomic-9.2.0-16.2 [ 13s] [12/103] installing libattr-2.5.1-5.362 [ 13s] [13/103] installing libblkid-2.37.4-12.5 [ 14s] [14/103] installing libbz2-1.0.8-5.234 [ 14s] [15/103] installing libcap-2.24-4.357 [ 14s] [16/103] installing libexpat-2.4.1-4.312 [ 15s] [17/103] installing libext2fs-1.46.0-4.43 [ 15s] [18/103] installing libfreebl3-3.34.1-3.487 [ 15s] [19/103] installing libgcc-9.2.0-16.2 [ 16s] [20/103] installing libgomp-9.2.0-16.2 [ 16s] [21/103] installing libitm-9.2.0-16.2 [ 16s] [22/103] installing libltdl-2.4.6-4.43 [ 17s] [23/103] installing liblua-5.1.5-3.334 [ 17s] [24/103] installing liblzma-5.2.5-5.298 [ 17s] [25/103] installing libopenssl11-1.1.1l-6.217 [ 18s] [26/103] installing libpcre-8.45-5.6 [ 18s] [27/103] installing libpopt-1.16-3.620 [ 19s] [28/103] installing libsmack-1.3.1-4.348 [ 19s] [29/103] installing libsmartcols-2.37.4-12.5 [ 19s] [30/103] installing libsqlite-3.37.2-5.34 [ 20s] [31/103] installing libuuid-2.37.4-12.5 [ 20s] [32/103] installing libzstd1-1.4.5-2.198 [ 20s] [33/103] installing m4-1.4.19-4.1 [ 20s] [34/103] installing net-tools-2.0_20121208git-4.4 [ 20s] [35/103] installing nspr-4.12-3.613 [ 21s] [36/103] installing patch-2.7.6-8.11 [ 21s] [37/103] installing pkg-config-0.29.2-4.29 [ 21s] [38/103] installing sed-4.1c-4.2 [ 21s] [39/103] installing update-alternatives-1.20.5-3.4 [ 21s] [40/103] installing which-2.17-4.4 [ 21s] [41/103] installing zlib-1.2.11-3.650 [ 21s] [42/103] installing build-compare-2015.04.28-3.228 [ 21s] [43/103] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 25s] [44/103] installing terminfo-base-full-6.2-7.280 [ 25s] [45/103] installing coreutils-6.9-5.128 [ 25s] [46/103] installing cpp-9.2.0-16.2 [ 26s] [47/103] installing gawk-3.1.5-4.4 [ 26s] [48/103] installing gcc-c++-9.2.0-16.2 [ 27s] [49/103] installing grep-2.5.2-3.4 [ 27s] [50/103] installing libacl-2.2.53-4.575 [ 27s] [51/103] installing libelf-0.178-4.80 [ 27s] [52/103] installing libgfortran-9.2.0-16.2 [ 28s] [53/103] installing libmount-2.37.4-12.5 [ 28s] [54/103] installing libstdc++-9.2.0-16.2 [ 29s] [55/103] installing libunwind-1.3.1-3.16 [ 29s] [56/103] installing make-4.3-3.13 [ 29s] [57/103] installing nss-certs-3.34.1-3.487 [ 29s] [58/103] installing smack-1.3.1-4.348 [ 29s] [59/103] installing bzip2-1.0.8-5.234 [ 29s] [60/103] installing libfdisk-2.37.4-12.5 [ 30s] [61/103] installing libmagic-5.41-6.304 [ 30s] [62/103] installing libxml2-2.9.12-7.154 [ 30s] [63/103] installing perl-5.34.0-7.23 [ 33s] [64/103] installing xz-5.2.5-5.298 [ 33s] [65/103] installing kmod-29-2.4 [ 33s] [66/103] installing build-mkbaselibs-20120927-3.3 [ 33s] [67/103] installing libstdc++-devel-9.2.0-16.2 [ 34s] [68/103] installing file-5.41-6.304 [ 34s] [69/103] installing kmod-compat-29-2.4 [ 34s] [70/103] installing linux-glibc-devel-3.10-4.478 [ 34s] [71/103] installing tar-1.17-3.3 [ 34s] [72/103] installing autoconf-2.71-6.44 [ 35s] [73/103] installing binutils-2.33.1-9.252 [ 35s] [74/103] installing glibc-locale-2.30-14.2 [ 36s] [75/103] installing gzip-1.3.12-3.626 [ 36s] [76/103] installing libcc1-9.2.0-16.2 [ 36s] [77/103] installing libubsan-9.2.0-16.2 [ 37s] [78/103] installing pam-1.1.6-4.2 [ 37s] [79/103] installing libncurses6-6.2-7.280 [ 37s] [80/103] installing tzdata-2021e-5.1 [ 38s] [81/103] installing libdw-0.178-4.80 [ 38s] [82/103] installing arm64-rpi4-linux-kernel-devel-5.10.95-91.3 [ 53s] [83/103] installing libarchive-3.5.2-3.106 [ 53s] [84/103] installing libncurses-6.2-7.280 [ 53s] [85/103] installing glibc-devel-2.30-14.2 [ 53s] [86/103] installing less-466-3.4 [ 53s] [87/103] installing libreadline-5.2-3.212 [ 54s] [88/103] installing procps-ng-3.3.17-4.1 [ 54s] [89/103] installing automake-1.16.4-6.40 [ 54s] [90/103] installing libasm-0.178-4.80 [ 54s] [91/103] installing build-20120927-3.3 [ 55s] [92/103] installing cmake-3.21.3-6.10 [ 56s] [93/103] installing gcc-9.2.0-16.2 [ 57s] [94/103] installing arm64-rpi3-linux-kernel-devel-4.19.49-100.46 [ 69s] [95/103] installing qemu-accel-x86_64-aarch64-0.4-10.1 [ 77s] [96/103] installing libtool-2.4.6-4.43 [ 77s] [97/103] installing elfutils-0.178-4.80 [ 77s] [98/103] installing util-linux-2.37.4-12.5 [ 77s] [99/103] installing util-linux-su-2.37.4-12.5 [ 77s] [100/103] installing nss-3.34.1-3.487 [ 78s] [101/103] installing libsoftokn3-3.34.1-3.487 [ 78s] [102/103] installing rpm-4.14.1.1-9.119 [ 79s] [103/103] installing rpm-build-4.14.1.1-9.119 [ 79s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 79s] now finalizing build dir... [ 79s] Running build time source services... [ 80s] build target is aarch64-tizen-linux [ 80s] ----------------------------------------------------------------- [ 80s] I have the following modifications for stability-monitor-kmod-rpi3.spec: [ 80s] 12c12 [ 80s] < Release: 0 [ 80s] --- [ 80s] > Release: 10.59 [ 80s] ----------------------------------------------------------------- [ 80s] ----- building stability-monitor-kmod-rpi3.spec (user abuild) [ 80s] ----------------------------------------------------------------- [ 80s] ----------------------------------------------------------------- [ 80s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/2c2843ddca918e398029127bf8accfd1-stability-monitor-kmod-rpi3' -ba /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.spec [ 80s] Building target platforms: aarch64-tizen-linux [ 80s] Building for target aarch64-tizen-linux [ 80s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.IPMhiq [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + rm -rf stability-monitor-kmod-rpi3-6.4.0 [ 80s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3-6.4.0.tar.xz [ 80s] + /bin/tar -xof - [ 80s] + STATUS=0 [ 80s] + '[' 0 -ne 0 ']' [ 80s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 80s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 80s] + cp /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.manifest ./stability-monitor-kmod-rpi3.manifest [ 80s] + exit 0 [ 80s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.L5tocs [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 80s] ++ uname -m [ 80s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 80s] + ref=/usr/lib/rpm [ 80s] + for s in guess sub [ 80s] ++ find -maxdepth 8 -name config.guess [ 80s] + for s in guess sub [ 80s] ++ find -maxdepth 8 -name config.sub [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + LDFLAGS= [ 80s] + export LDFLAGS [ 80s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DLIBPATH=/usr/lib64 [ 80s] CMake Warning: [ 80s] No source or binary directory provided. Both will be assumed to be the [ 80s] same as the current working directory, but note that this warning will [ 80s] become a fatal error in future CMake releases. [ 80s] [ 80s] [ 80s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 80s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 80s] CMake. [ 80s] [ 80s] Update the VERSION argument value or use a ... suffix to tell [ 80s] CMake that the project does not need compatibility with older versions. [ 80s] [ 80s] [ 80s] -- The C compiler identification is GNU 9.2.0 [ 80s] -- Detecting C compiler ABI info [ 80s] -- Detecting C compiler ABI info - done [ 80s] -- Check for working C compiler: /bin/cc - skipped [ 80s] -- Detecting C compile features [ 80s] -- Detecting C compile features - done [ 80s] -- Configuring done [ 80s] -- Generating done [ 80s] CMake Warning: [ 80s] Manually-specified variables were not used by the project: [ 80s] [ 80s] BUILD_SHARED_LIBS [ 80s] CMAKE_INSTALL_LIBDIR [ 80s] CMAKE_SKIP_RPATH [ 80s] INCLUDE_INSTALL_DIR [ 80s] LIB_INSTALL_DIR [ 80s] LIB_SUFFIX [ 80s] SHARE_INSTALL_PREFIX [ 80s] SYSCONF_INSTALL_DIR [ 80s] [ 80s] [ 80s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 80s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3 [ 80s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 80s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 80s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 81s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 81s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 81s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3/ [ 81s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 81s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3/ M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel modules [ 81s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 82s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.o [ 82s] Building modules, stage 2. [ 82s] MODPOST 1 modules [ 83s] CC /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.mod.o [ 83s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 83s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 83s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 83s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3 INSTALL_MOD_STRIP=1 [ 83s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 83s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/../ modules_install [ 83s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 84s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 84s] DEPMOD 4.19.49-arm64-rpi3-v8 [ 84s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/4.19.49-arm64-rpi3-v8: No such file or directory [ 84s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/4.19.49-arm64-rpi3-v8: No such file or directory [ 84s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 84s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 84s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 [ 84s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 84s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 84s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 85s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 85s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 85s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 85s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 [ 85s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 85s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel modules [ 85s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 85s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.o [ 86s] MODPOST /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 86s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.mod.o [ 86s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 86s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 86s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 86s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 INSTALL_MOD_STRIP=1 [ 86s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 86s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/../ modules_install [ 86s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 87s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 87s] DEPMOD 5.10.95-arm64-rpi4-v8 [ 87s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/5.10.95-arm64-rpi4-v8: No such file or directory [ 87s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/5.10.95-arm64-rpi4-v8: No such file or directory [ 87s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 87s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 87s] + exit 0 [ 87s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.QS3CVq [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 87s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 87s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64//usr/lib64/stability-monitor [ 87s] + pushd lib/modules [ 87s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/lib/modules ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 87s] + find -name '*.ko' -exec cp -a --parents '{}' /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64//usr/lib64/stability-monitor/ ';' [ 87s] + popd [ 87s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 87s] + install -D config/stability-monitor.conf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64/etc/modprobe.d/stability-monitor.conf [ 87s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 6.4.0-10.59 --unique-debug-src-base stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 87s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/stability-monitor-kmod-rpi3-debuginfo.manifest [ 87s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/stability-monitor-kmod-rpi3-debugsource.manifest [ 87s] + /usr/lib/rpm/check-buildroot [ 87s] + /usr/lib/rpm//brp-compress [ 87s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 88s] + /usr/lib/rpm/brp-python-hardlink [ 88s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 88s] Processing files: stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 88s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 88s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 88s] [ 88s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.50Djip [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 88s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64/usr/share/licenses/stability-monitor-kmod-rpi3 [ 88s] + export LC_ALL=C [ 88s] + LC_ALL=C [ 88s] + export LICENSEDIR [ 88s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64/usr/share/licenses/stability-monitor-kmod-rpi3 [ 88s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64/usr/share/licenses/stability-monitor-kmod-rpi3 [ 88s] + exit 0 [ 88s] Provides: stability-monitor-kernel-module stability-monitor-kmod-rpi3 = 6.4.0-10.59 stability-monitor-kmod-rpi3(aarch-64) = 6.4.0-10.59 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Processing files: stability-monitor-kmod-rpi3-debugsource-6.4.0-10.59.aarch64 [ 88s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/debugsourcefiles.list [ 88s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 88s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 88s] [ 88s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 88s] Wrote: /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.4.0-10.59.src.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/stability-monitor-kmod-rpi3-debugsource-6.4.0-10.59.aarch64.rpm [ 88s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.I6djdt [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.59.aarch64 [ 88s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3 [ 88s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 88s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 88s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 89s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/.tmp_versions [ 89s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 89s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 89s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 89s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 [ 89s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 89s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 89s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 89s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 89s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 89s] + rm -rf '/home/abuild/rpmbuild/BUILD/%{Name}-6.4.0/lib' [ 89s] + exit 0 [ 89s] ... checking for files with abuild user/group [ 89s] ... creating baselibs [ 90s] [ 90s] obspw16 finished "build stability-monitor-kmod-rpi3.spec" at Fri May 6 06:16:08 UTC 2022. [ 90s] Retried build at Tue May 17 05:39:06 2022 returned same result, skipped