[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw17 started "build _service:gbs:hal-api-power.spec" at Fri May 6 06:05:04 UTC 2022. [ 0s] [ 0s] Building hal-api-power for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '4b887561b5bd9bb5917e329b2e6fd7d1' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-api-power.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-api-power.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-api-power.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-armv7l postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] reordering...cycle: gio-branding-upstream -> libgio [ 10s] breaking dependency libgio -> gio-branding-upstream [ 10s] cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 11s] [1/114] installing dlog-config-persistent-logs-7.0.3-127.3 [ 11s] [2/114] installing libmagic-data-5.41-6.304 [ 11s] [3/114] installing setup-0.9-6.8 [ 11s] warning: /etc/profile created as /etc/profile.rpmnew [ 11s] [4/114] installing filesystem-3.1-4.1 [ 11s] [5/114] installing glibc-2.30-14.2 [ 11s] [6/114] installing libatomic-9.2.0-16.2 [ 12s] [7/114] installing libgcc-9.2.0-16.2 [ 12s] [8/114] installing bash-3.2.57-5.1 [ 12s] [9/114] installing capi-base-common-0.4.70-54.2 [ 12s] [10/114] installing cpio-2.8-5.3 [ 12s] [11/114] installing diffutils-3.3-4.3 [ 13s] [12/114] installing findutils-4.3.8-5.372 [ 13s] [13/114] installing gdbm-1.8.3-3.672 [ 13s] [14/114] installing hostname-3.23-3.3 [ 13s] [15/114] installing libattr-2.5.1-5.363 [ 13s] [16/114] installing libblkid-2.37.4-12.5 [ 13s] [17/114] installing libbz2-1.0.8-5.235 [ 14s] [18/114] installing libcap-2.24-4.358 [ 14s] [19/114] installing libexpat-2.4.1-4.313 [ 14s] [20/114] installing libext2fs-1.46.0-4.43 [ 15s] [21/114] installing libffi-3.3-5.383 [ 15s] [22/114] installing libfreebl3-3.34.1-3.487 [ 16s] [23/114] installing libgfortran-9.2.0-16.2 [ 16s] [24/114] installing libgomp-9.2.0-16.2 [ 16s] [25/114] installing libitm-9.2.0-16.2 [ 16s] [26/114] installing libltdl-2.4.6-4.44 [ 17s] [27/114] installing liblua-5.1.5-3.334 [ 17s] [28/114] installing liblzma-5.2.5-5.298 [ 17s] [29/114] installing libopenssl11-1.1.1l-6.217 [ 18s] [30/114] installing libpcre-8.45-5.6 [ 18s] [31/114] installing libpopt-1.16-3.621 [ 18s] [32/114] installing libsmack-1.3.1-4.349 [ 19s] [33/114] installing libsmartcols-2.37.4-12.5 [ 19s] [34/114] installing libsqlite-3.37.2-5.35 [ 19s] [35/114] installing libstdc++-9.2.0-16.2 [ 20s] [36/114] installing libuuid-2.37.4-12.5 [ 20s] [37/114] installing libzstd1-1.4.5-2.199 [ 20s] [38/114] installing m4-1.4.19-4.2 [ 20s] [39/114] installing net-tools-2.0_20121208git-4.4 [ 20s] [40/114] installing nspr-4.12-3.614 [ 21s] [41/114] installing patch-2.7.6-8.12 [ 21s] [42/114] installing pkg-config-0.29.2-4.30 [ 21s] [43/114] installing sed-4.1c-4.2 [ 21s] [44/114] installing update-alternatives-1.20.5-3.4 [ 21s] [45/114] installing which-2.17-4.4 [ 21s] [46/114] installing zlib-1.2.11-3.651 [ 22s] [47/114] installing build-compare-2015.04.28-3.228 [ 22s] [48/114] installing libstdc++-devel-9.2.0-16.2 [ 22s] [49/114] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 25s] [50/114] installing terminfo-base-full-6.2-7.280 [ 25s] [51/114] installing capi-base-common-devel-0.4.70-54.2 [ 25s] [52/114] installing cpp-9.2.0-16.2 [ 26s] [53/114] installing gcc-c++-9.2.0-16.2 [ 27s] [54/114] installing binutils-2.33.1-9.253 [ 27s] [55/114] installing coreutils-6.9-5.128 [ 28s] [56/114] installing gawk-3.1.5-4.4 [ 28s] [57/114] installing grep-2.5.2-3.4 [ 28s] [58/114] installing libacl-2.2.53-4.576 [ 28s] [59/114] installing libcc1-9.2.0-16.2 [ 28s] [60/114] installing libelf-0.178-4.81 [ 29s] [61/114] installing libglib-2.70.0-33.85 [ 29s] [62/114] installing libmount-2.37.4-12.5 [ 29s] [63/114] installing libubsan-9.2.0-16.2 [ 30s] [64/114] installing make-4.3-3.13 [ 30s] [65/114] installing nss-certs-3.34.1-3.487 [ 30s] [66/114] installing smack-1.3.1-4.349 [ 30s] [67/114] installing bzip2-1.0.8-5.235 [ 30s] [68/114] installing libfdisk-2.37.4-12.5 [ 30s] [69/114] installing libmagic-5.41-6.304 [ 31s] [70/114] installing libxml2-2.9.12-7.154 [ 31s] [71/114] installing perl-5.34.0-7.23 [ 33s] [72/114] installing xz-5.2.5-5.298 [ 33s] [73/114] installing dlog-7.0.3-127.3 [ 34s] [74/114] installing build-mkbaselibs-20120927-3.3 [ 34s] [75/114] installing linux-glibc-devel-3.10-4.479 [ 34s] [76/114] installing autoconf-2.71-6.45 [ 35s] [77/114] installing dlog-logger-7.0.3-127.3 [ 35s] [78/114] installing file-5.41-6.304 [ 35s] [79/114] installing glibc-locale-2.30-14.2 [ 36s] [80/114] installing libgmodule-2.70.0-33.85 [ 36s] [81/114] installing tar-1.17-3.4 [ 36s] [82/114] installing gzip-1.3.12-3.627 [ 36s] [83/114] installing libgobject-2.70.0-33.85 [ 36s] [84/114] installing libncurses6-6.2-7.280 [ 37s] [85/114] installing pam-1.1.6-4.2 [ 38s] [86/114] installing tzdata-2021e-5.1 [ 38s] [87/114] installing libdw-0.178-4.81 [ 38s] [88/114] installing libarchive-3.5.2-3.107 [ 39s] [89/114] installing shared-mime-info-1.7-5.24 [ 46s] [90/114] installing gcc-9.2.0-16.2 [ 47s] [91/114] installing libncurses-6.2-7.280 [ 47s] [92/114] installing glibc-devel-2.30-14.2 [ 47s] [93/114] installing qemu-accel-x86_64-armv7l-0.4-10.1 [ 58s] [94/114] installing automake-1.16.4-6.41 [ 59s] [95/114] installing less-466-3.4 [ 59s] [96/114] installing libreadline-5.2-3.212 [ 59s] [97/114] installing procps-ng-3.3.17-4.1 [ 59s] [98/114] installing libasm-0.178-4.81 [ 59s] [99/114] installing build-20120927-3.3 [ 59s] [100/114] installing libdlog-7.0.3-127.3 [ 61s] [101/114] installing cmake-3.21.3-6.11 [ 62s] [102/114] installing libdlog-devel-7.0.3-127.3 [ 62s] [103/114] installing libtool-2.4.6-4.44 [ 62s] [104/114] installing elfutils-0.178-4.81 [ 62s] [105/114] installing util-linux-2.37.4-12.5 [ 62s] [106/114] installing util-linux-su-2.37.4-12.5 [ 62s] [107/114] installing nss-3.34.1-3.487 [ 63s] [108/114] installing libgio-2.70.0-33.85 [ 63s] [109/114] installing gio-branding-upstream-2.70.0-33.85 [ 63s] [110/114] installing hal-api-common-0.0.1-33.2 [ 63s] [111/114] installing libsoftokn3-3.34.1-3.487 [ 64s] [112/114] installing rpm-4.14.1.1-9.119 [ 64s] [113/114] installing hal-api-common-devel-0.0.1-33.2 [ 64s] [114/114] installing rpm-build-4.14.1.1-9.119 [ 64s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 64s] now finalizing build dir... [ 65s] Running build time source services... [ 65s] build target is armv7l-tizen-linux [ 65s] ----------------------------------------------------------------- [ 65s] I have the following modifications for hal-api-power.spec: [ 65s] 10c10 [ 65s] < Release: 1 [ 65s] --- [ 65s] > Release: 8.2 [ 65s] ----------------------------------------------------------------- [ 65s] ----- building hal-api-power.spec (user abuild) [ 65s] ----------------------------------------------------------------- [ 65s] ----------------------------------------------------------------- [ 65s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/4b887561b5bd9bb5917e329b2e6fd7d1-hal-api-power' -ba /home/abuild/rpmbuild/SOURCES/hal-api-power.spec [ 65s] Building target platforms: armv7l-tizen-linux [ 65s] Building for target armv7l-tizen-linux [ 65s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9ej6wi [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + rm -rf hal-api-power-0.0.1 [ 65s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-api-power-0.0.1.tar.gz [ 65s] + /bin/tar -xof - [ 65s] + STATUS=0 [ 65s] + '[' 0 -ne 0 ']' [ 65s] + cd hal-api-power-0.0.1 [ 65s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 65s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_LIBDIR_PREFIX=/usr/lib [ 65s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 65s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 65s] CMake. [ 65s] [ 65s] Update the VERSION argument value or use a ... suffix to tell [ 65s] CMake that the project does not need compatibility with older versions. [ 65s] [ 65s] [ 65s] -- The C compiler identification is GNU 9.2.0 [ 65s] -- Detecting C compiler ABI info [ 65s] -- Detecting C compiler ABI info - done [ 65s] -- Check for working C compiler: /bin/cc - skipped [ 65s] -- Detecting C compile features [ 65s] -- Detecting C compile features - done [ 65s] -- Found PkgConfig: /bin/pkg-config (found version "0.29.2") [ 65s] -- Checking for modules 'dlog;hal-api-common' [ 66s] -- Found dlog, version 1.0 [ 66s] -- Found hal-api-common, version 0.1.0 [ 66s] -- Configuring done [ 66s] -- Generating done [ 66s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-api-power-0.0.1 [ 66s] + exit 0 [ 66s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.4JGwOi [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd hal-api-power-0.0.1 [ 66s] ++ uname -m [ 66s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + LDFLAGS= [ 66s] + export LDFLAGS [ 66s] + cp /home/abuild/rpmbuild/SOURCES/hal-api-power.manifest . [ 66s] + make -j4 [ 66s] [ 50%] Building C object CMakeFiles/hal-api-power.dir/src/hal-api-power.c.o [ 66s] [100%] Linking C shared library libhal-api-power.so [ 66s] [100%] Built target hal-api-power [ 66s] + exit 0 [ 66s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.739mli [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd hal-api-power-0.0.1 [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 66s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm install [ 66s] Consolidate compiler generated dependencies of target hal-api-power [ 66s] [100%] Built target hal-api-power [ 66s] Install the project... [ 66s] -- Install configuration: "" [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/lib/hal/libhal-api-power.so.0.1.0 [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/lib/hal/libhal-api-power.so.0 [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/lib/hal/libhal-api-power.so [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/include/hal [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/include/hal/hal-power.h [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/include/hal/hal-power-interface.h [ 66s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/lib/pkgconfig/hal-api-power.pc [ 66s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/info/dir [ 66s] + find /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm -regex '.*\.la$' [ 66s] + xargs rm -f -- [ 66s] + find /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm -regex '.*\.a$' [ 66s] + xargs rm -f -- [ 66s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.0.1-8.2 --unique-debug-src-base hal-api-power-0.0.1-8.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-api-power-0.0.1 [ 67s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/lib/hal/libhal-api-power.so.0.1.0 [ 67s] 50 blocks [ 67s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-api-power-0.0.1/hal-api-power-debuginfo.manifest [ 67s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-api-power-0.0.1/hal-api-power-debugsource.manifest [ 67s] + /usr/lib/rpm/check-buildroot [ 67s] + /usr/lib/rpm//brp-compress [ 67s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 67s] + /usr/lib/rpm/brp-python-hardlink [ 67s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 67s] Processing files: hal-api-power-0.0.1-8.2.armv7l [ 67s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 67s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 67s] [ 67s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.mC3lWk [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd hal-api-power-0.0.1 [ 67s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/licenses/hal-api-power [ 67s] + export LC_ALL=C [ 67s] + LC_ALL=C [ 67s] + export LICENSEDIR [ 67s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/licenses/hal-api-power [ 67s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/licenses/hal-api-power [ 67s] + exit 0 [ 67s] Provides: hal-api-power = 0.0.1-8.2 hal-api-power(armv7l-32) = 0.0.1-8.2 libhal-api-power.so.0 [ 67s] Requires(interp): /bin/sh /bin/sh [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Requires(post): /bin/sh /sbin/ldconfig [ 67s] Requires(postun): /bin/sh /sbin/ldconfig [ 67s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libdlog.so.0 libhal-api-common.so.0 libhal-api-power.so.0 librt.so.1 [ 67s] Processing files: hal-api-power-debugsource-0.0.1-8.2.armv7l [ 67s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 67s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 67s] [ 67s] Provides: hal-api-power-debugsource = 0.0.1-8.2 hal-api-power-debugsource(armv7l-32) = 0.0.1-8.2 [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Processing files: hal-api-power-devel-0.0.1-8.2.armv7l [ 67s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Tv1Ozj [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd hal-api-power-0.0.1 [ 67s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/licenses/hal-api-power-devel [ 67s] + export LC_ALL=C [ 67s] + LC_ALL=C [ 67s] + export LICENSEDIR [ 67s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/licenses/hal-api-power-devel [ 67s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm/usr/share/licenses/hal-api-power-devel [ 67s] + exit 0 [ 67s] Provides: hal-api-power-devel = 0.0.1-8.2 hal-api-power-devel(armv7l-32) = 0.0.1-8.2 pkgconfig(hal-api-power) = 0.1.0 [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Requires: /usr/bin/pkg-config pkgconfig(hal-api-common) [ 67s] Processing files: hal-api-power-debuginfo-0.0.1-8.2.armv7l [ 67s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 67s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 67s] [ 67s] Provides: hal-api-power-debuginfo = 0.0.1-8.2 hal-api-power-debuginfo(armv7l-32) = 0.0.1-8.2 [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Recommends: hal-api-power-debugsource(armv7l-32) = 0.0.1-8.2 [ 67s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 67s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-api-power-0.0.1-8.2.src.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-power-0.0.1-8.2.armv7l.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-power-debugsource-0.0.1-8.2.armv7l.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-power-devel-0.0.1-8.2.armv7l.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-power-debuginfo-0.0.1-8.2.armv7l.rpm [ 67s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.wZ0W3l [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd hal-api-power-0.0.1 [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-power-0.0.1-8.2.arm [ 67s] + exit 0 [ 67s] ... checking for files with abuild user/group [ 67s] ... creating baselibs [ 68s] [ 68s] obsnw17 finished "build hal-api-power.spec" at Fri May 6 06:06:12 UTC 2022. [ 68s] Retried build at Tue May 17 07:01:33 2022 returned same result, skipped