[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 1s] [ 1s] obspw27 started "build _service:gbs:spirv-tools.spec" at Mon May 3 17:56:45 UTC 2021. [ 1s] [ 1s] Building spirv-tools for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '66fc88b20d673d8246f5244d46dd1312' [ 1s] [ 1s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:spirv-tools.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:spirv-tools.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:spirv-tools.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 2s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 2s] [14/41] preinstalling libgcc... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 9s] [39/41] preinstalling nss... [ 9s] [40/41] preinstalling libsoftokn3... [ 9s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 10s] [1/103] installing libmagic-data-5.39-4.116 [ 10s] [2/103] installing setup-0.9-4.32 [ 10s] [3/103] installing spirv-headers-devel-1.2-2.4 [ 10s] [4/103] installing filesystem-3.1-3.3 [ 10s] [5/103] installing glibc-2.30-7.6 [ 11s] [6/103] installing bash-3.2.57-4.4 [ 11s] [7/103] installing cpio-2.8-5.2 [ 11s] [8/103] installing diffutils-3.3-4.2 [ 11s] [9/103] installing findutils-4.3.8-4.22 [ 11s] [10/103] installing gdbm-1.8.3-3.214 [ 11s] [11/103] installing hostname-3.23-3.2 [ 11s] [12/103] installing libatomic-9.2.0-9.17 [ 12s] [13/103] installing libattr-2.4.48-4.137 [ 12s] [14/103] installing libblkid-2.36-7.25 [ 12s] [15/103] installing libbz2-1.0.8-4.152 [ 13s] [16/103] installing libcap-2.24-3.197 [ 13s] [17/103] installing libexpat-2.2.9-3.95 [ 13s] [18/103] installing libext2fs-1.46.0-4.11 [ 14s] [19/103] installing libfreebl3-3.34.1-3.155 [ 14s] [20/103] installing libgcc-9.2.0-9.17 [ 14s] [21/103] installing libgomp-9.2.0-9.17 [ 15s] [22/103] installing libitm-9.2.0-9.17 [ 15s] [23/103] installing libltdl-2.4.2-3.162 [ 15s] [24/103] installing liblua-5.1.5-3.139 [ 16s] [25/103] installing liblzma-5.2.5-4.77 [ 16s] [26/103] installing libopenssl11-1.1.1k-5.6 [ 16s] [27/103] installing libpcre-8.44-4.23 [ 17s] [28/103] installing libpopt-1.16-3.195 [ 17s] [29/103] installing libpython-2.7.18-4.51 [ 18s] [30/103] installing libsmack-1.3.1-3.191 [ 18s] [31/103] installing libsmartcols-2.36-7.25 [ 18s] [32/103] installing libsqlite-3.33.0-4.121 [ 19s] [33/103] installing libuuid-2.36-7.25 [ 19s] [34/103] installing libzstd1-1.4.5-1.92 [ 19s] [35/103] installing m4-1.4.17-3.2 [ 19s] [36/103] installing net-tools-2.0_20121208git-4.3 [ 19s] [37/103] installing nspr-4.12-3.196 [ 20s] [38/103] installing patch-2.7-6.20 [ 20s] [39/103] installing pkg-config-0.28-3.189 [ 20s] [40/103] installing sed-4.1c-4.1 [ 20s] [41/103] installing update-alternatives-1.20.5-3.3 [ 20s] [42/103] installing which-2.17-4.3 [ 20s] [43/103] installing zlib-1.2.11-3.202 [ 20s] [44/103] installing build-compare-2015.04.28-3.76 [ 20s] [45/103] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 22s] [46/103] installing terminfo-base-full-6.2-5.110 [ 22s] [47/103] installing coreutils-6.9-5.10 [ 22s] [48/103] installing cpp-9.2.0-9.17 [ 23s] [49/103] installing gawk-3.1.5-4.3 [ 23s] [50/103] installing gcc-c++-9.2.0-9.17 [ 24s] [51/103] installing grep-2.5.2-3.3 [ 24s] [52/103] installing libacl-2.2.53-4.136 [ 24s] [53/103] installing libelf-0.178-3.113 [ 24s] [54/103] installing libgfortran-9.2.0-9.17 [ 25s] [55/103] installing libmount-2.36-7.25 [ 25s] [56/103] installing libstdc++-9.2.0-9.17 [ 26s] [57/103] installing make-4.0-2.56 [ 26s] [58/103] installing nss-certs-3.34.1-3.155 [ 26s] [59/103] installing smack-1.3.1-3.191 [ 26s] [60/103] installing bzip2-1.0.8-4.152 [ 26s] [61/103] installing libfdisk-2.36-7.25 [ 26s] [62/103] installing libmagic-5.39-4.116 [ 27s] [63/103] installing libxml2-2.9.10-4.23 [ 27s] [64/103] installing perl-5.32.0-4.63 [ 30s] [65/103] installing xz-5.2.5-4.77 [ 30s] [66/103] installing build-mkbaselibs-20120927-3.3 [ 30s] [67/103] installing libstdc++-devel-9.2.0-9.17 [ 30s] [68/103] installing file-5.39-4.116 [ 30s] [69/103] installing linux-glibc-devel-3.10-4.41 [ 31s] [70/103] installing tar-1.17-3.1 [ 31s] [71/103] installing autoconf-2.69-3.122 [ 31s] [72/103] installing binutils-2.33.1-9.2 [ 32s] [73/103] installing db4-4.8.30.NC-3.194 [ 32s] [74/103] installing glibc-locale-2.30-7.6 [ 33s] [75/103] installing gzip-1.3.12-3.196 [ 33s] [76/103] installing libcc1-9.2.0-9.17 [ 33s] [77/103] installing libubsan-9.2.0-9.17 [ 33s] [78/103] installing pam-1.1.6-3.3 [ 34s] [79/103] installing libncurses6-6.2-5.110 [ 34s] [80/103] installing tzdata-2020a-3.3 [ 35s] [81/103] installing libdw-0.178-3.113 [ 37s] [82/103] installing libarchive-3.5.1-2.28 [ 37s] [83/103] installing libncurses-6.2-5.110 [ 37s] [84/103] installing glibc-devel-2.30-7.6 [ 37s] [85/103] installing less-466-3.3 [ 38s] [86/103] installing libreadline-5.2-3.57 [ 38s] [87/103] installing procps-ng-3.3.16-3.3 [ 38s] [88/103] installing automake-1.15.1-3.147 [ 39s] [89/103] installing libasm-0.178-3.113 [ 39s] [90/103] installing build-20120927-3.3 [ 39s] [91/103] installing cmake-3.16.4-4.2 [ 40s] [92/103] installing gcc-9.2.0-9.17 [ 41s] [93/103] installing qemu-accel-x86_64-aarch64-0.4-7.1 [ 49s] [94/103] installing libtool-2.4.2-3.162 [ 50s] [95/103] installing elfutils-0.178-3.113 [ 50s] [96/103] installing python-2.7.18-4.51 [ 51s] [97/103] installing util-linux-2.36-7.25 [ 51s] [98/103] installing python-xml-2.7.18-4.51 [ 51s] [99/103] installing util-linux-su-2.36-7.25 [ 51s] [100/103] installing nss-3.34.1-3.155 [ 52s] [101/103] installing libsoftokn3-3.34.1-3.155 [ 52s] [102/103] installing rpm-4.14.1.1-8.11 [ 52s] [103/103] installing rpm-build-4.14.1.1-8.11 [ 53s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 53s] now finalizing build dir... [ 53s] Running build time source services... [ 53s] build target is aarch64-tizen-linux [ 53s] ----------------------------------------------------------------- [ 53s] I have the following modifications for spirv-tools.spec: [ 53s] 4c4 [ 53s] < Release: 0 [ 53s] --- [ 53s] > Release: 3.85 [ 53s] ----------------------------------------------------------------- [ 53s] ----- building spirv-tools.spec (user abuild) [ 53s] ----------------------------------------------------------------- [ 53s] ----------------------------------------------------------------- [ 53s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/66fc88b20d673d8246f5244d46dd1312-spirv-tools' -ba /home/abuild/rpmbuild/SOURCES/spirv-tools.spec [ 53s] Building target platforms: aarch64-tizen-linux [ 53s] Building for target aarch64-tizen-linux [ 53s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EqlK6W [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + rm -rf spirv-tools-2018.6 [ 53s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/spirv-tools-2018.6.tar.gz [ 53s] + /bin/tar -xof - [ 53s] + STATUS=0 [ 53s] + '[' 0 -ne 0 ']' [ 53s] + cd spirv-tools-2018.6 [ 53s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 53s] + echo 'Patch #0 (0001-Add-dependency-for-SPIRV-Headers.patch):' [ 53s] Patch #0 (0001-Add-dependency-for-SPIRV-Headers.patch): [ 53s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 53s] patching file source/CMakeLists.txt [ 53s] + echo 'Patch #1 (0002-do-not-use-the-external.patch):' [ 53s] Patch #1 (0002-do-not-use-the-external.patch): [ 53s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 53s] patching file CMakeLists.txt [ 53s] + exit 0 [ 53s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.08vWwS [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd spirv-tools-2018.6 [ 54s] ++ uname -m [ 54s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 54s] + ref=/usr/lib/rpm [ 54s] + for s in guess sub [ 54s] ++ find -maxdepth 8 -name config.guess [ 54s] + for s in guess sub [ 54s] ++ find -maxdepth 8 -name config.sub [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + LDFLAGS= [ 54s] + export LDFLAGS [ 54s] + cp /home/abuild/rpmbuild/SOURCES/spirv-tools.manifest . [ 54s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wno-stringop-truncation' [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wno-stringop-truncation' [ 54s] + export 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wno-stringop-truncation' [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wno-stringop-truncation' [ 54s] + cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_LIBDIR=/usr/lib64 -DCMAKE_INSTALL_INCLUDEDIR=/usr/include -DCMAKE_INSTALL_DATADIR=/usr/share -DCMAKE_INSTALL_BINDIR=/usr/bin [ 54s] CMake Warning: [ 54s] No source or binary directory provided. Both will be assumed to be the [ 54s] same as the current working directory, but note that this warning will [ 54s] become a fatal error in future CMake releases. [ 54s] [ 54s] [ 54s] -- The C compiler identification is GNU 9.2.0 [ 54s] -- The CXX compiler identification is GNU 9.2.0 [ 54s] -- Check for working C compiler: /bin/cc [ 54s] -- Check for working C compiler: /bin/cc -- works [ 54s] -- Detecting C compiler ABI info [ 54s] -- Detecting C compiler ABI info - done [ 54s] -- Detecting C compile features [ 54s] -- Detecting C compile features - done [ 54s] -- Check for working CXX compiler: /bin/c++ [ 54s] -- Check for working CXX compiler: /bin/c++ -- works [ 54s] -- Detecting CXX compiler ABI info [ 54s] -- Detecting CXX compiler ABI info - done [ 54s] -- Detecting CXX compile features [ 54s] -- Detecting CXX compile features - done [ 54s] -- SPIRV-Tools: nosetests was not found - python support code will not be tested [ 54s] -- Found PythonInterp: /bin/python (found version "2.7.18") [ 54s] -- Did not find googletest, tests will not be built. To enable tests place googletest in '/external/googletest'. [ 54s] -- Configuring done [ 54s] -- Generating done [ 54s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6 [ 54s] + make [ 54s] Scanning dependencies of target spirv-tools-shared-pkg-config [ 54s] [ 0%] Built target spirv-tools-shared-pkg-config [ 54s] Scanning dependencies of target spirv-tools-pkg-config [ 54s] [ 0%] Built target spirv-tools-pkg-config [ 54s] [ 0%] Update build-version.inc in the SPIRV-Tools build directory (if necessary). [ 55s] [ 1%] Generate enum-string mapping for SPIR-V vunified1. [ 55s] [ 1%] Generate info tables for OpenCL extended instructions and operands vunified1. [ 56s] [ 2%] Generate info tables for GLSL extended instructions and operands vunified1. [ 56s] [ 2%] Generate extended instruction tables for spv-amd-shader-explicit-vertex-parameter. [ 56s] [ 2%] Generate extended instruction tables for spv-amd-shader-trinary-minmax. [ 57s] [ 3%] Generate extended instruction tables for spv-amd-gcn-shader. [ 57s] [ 3%] Generate extended instruction tables for spv-amd-shader-ballot. [ 58s] [ 3%] Generate extended instruction tables for debuginfo. [ 58s] [ 4%] Generate language specific header for DebugInfo. [ 58s] [ 4%] Generate info tables for SPIR-V vunified1 core instructions and operands. [ 59s] [ 5%] Generate tables based on the SPIR-V XML registry. [ 60s] Scanning dependencies of target SPIRV-Tools-shared [ 60s] [ 5%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/bit_vector.cpp.o [ 60s] [ 6%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/parse_number.cpp.o [ 62s] [ 6%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/string_utils.cpp.o [ 63s] [ 6%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/assembly_grammar.cpp.o [ 64s] [ 7%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/binary.cpp.o [ 66s] [ 7%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/diagnostic.cpp.o [ 67s] [ 8%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/disassemble.cpp.o [ 69s] [ 8%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/enum_string_mapping.cpp.o [ 69s] [ 8%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/ext_inst.cpp.o [ 70s] [ 9%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/extensions.cpp.o [ 70s] [ 9%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/id_descriptor.cpp.o [ 71s] [ 9%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/libspirv.cpp.o [ 72s] [ 10%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/name_mapper.cpp.o [ 73s] [ 10%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/opcode.cpp.o [ 74s] [ 11%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/operand.cpp.o [ 75s] [ 11%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/parsed_operand.cpp.o [ 76s] [ 11%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/print.cpp.o [ 76s] [ 12%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/software_version.cpp.o [ 76s] [ 12%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_endian.cpp.o [ 76s] [ 12%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_optimizer_options.cpp.o [ 76s] [ 13%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_target_env.cpp.o [ 76s] [ 13%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_validator_options.cpp.o [ 76s] [ 13%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/table.cpp.o [ 77s] [ 14%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/text.cpp.o [ 79s] [ 14%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/text_handler.cpp.o [ 81s] [ 15%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate.cpp.o [ 84s] [ 15%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_adjacency.cpp.o [ 86s] [ 15%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_annotation.cpp.o [ 88s] [ 16%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_arithmetics.cpp.o [ 89s] [ 16%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_atomics.cpp.o [ 91s] [ 16%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_barriers.cpp.o [ 92s] [ 17%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_bitwise.cpp.o [ 93s] [ 17%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_builtins.cpp.o [ 100s] [ 18%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_capability.cpp.o [ 101s] [ 18%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_cfg.cpp.o [ 106s] [ 18%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_composites.cpp.o [ 107s] [ 19%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_constants.cpp.o [ 109s] [ 19%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_conversion.cpp.o [ 111s] [ 19%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_datarules.cpp.o [ 112s] [ 20%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_debug.cpp.o [ 113s] [ 20%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_decorations.cpp.o [ 116s] [ 21%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_derivatives.cpp.o [ 118s] [ 21%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_ext_inst.cpp.o [ 122s] [ 21%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_execution_limitations.cpp.o [ 123s] [ 22%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_function.cpp.o [ 125s] [ 22%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_id.cpp.o [ 126s] [ 22%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_image.cpp.o [ 129s] [ 23%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_interfaces.cpp.o [ 130s] [ 23%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_instruction.cpp.o [ 132s] [ 24%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_layout.cpp.o [ 134s] [ 24%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_literals.cpp.o [ 135s] [ 24%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_logicals.cpp.o [ 136s] [ 25%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_memory.cpp.o [ 138s] [ 25%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_mode_setting.cpp.o [ 140s] [ 25%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_non_uniform.cpp.o [ 142s] [ 26%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_primitives.cpp.o [ 143s] [ 26%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_type.cpp.o [ 145s] [ 26%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/basic_block.cpp.o [ 145s] [ 27%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/construct.cpp.o [ 146s] [ 27%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/function.cpp.o [ 149s] [ 28%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/instruction.cpp.o [ 150s] [ 28%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validation_state.cpp.o [ 154s] [ 28%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/timer.cpp.o [ 155s] [ 29%] Linking CXX shared library libSPIRV-Tools-shared.so [ 155s] [ 29%] Built target SPIRV-Tools-shared [ 155s] Scanning dependencies of target SPIRV-Tools [ 155s] [ 29%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/bit_vector.cpp.o [ 156s] [ 30%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/parse_number.cpp.o [ 158s] [ 30%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/string_utils.cpp.o [ 158s] [ 30%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/assembly_grammar.cpp.o [ 159s] [ 31%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/binary.cpp.o [ 162s] [ 31%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/diagnostic.cpp.o [ 163s] [ 32%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/disassemble.cpp.o [ 164s] [ 32%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/enum_string_mapping.cpp.o [ 165s] [ 32%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/ext_inst.cpp.o [ 165s] [ 33%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/extensions.cpp.o [ 166s] [ 33%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/id_descriptor.cpp.o [ 166s] [ 33%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/libspirv.cpp.o [ 167s] [ 34%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/name_mapper.cpp.o [ 169s] [ 34%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/opcode.cpp.o [ 170s] [ 35%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/operand.cpp.o [ 170s] [ 35%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/parsed_operand.cpp.o [ 171s] [ 35%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/print.cpp.o [ 171s] [ 36%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/software_version.cpp.o [ 171s] [ 36%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_endian.cpp.o [ 171s] [ 36%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_optimizer_options.cpp.o [ 172s] [ 37%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_target_env.cpp.o [ 172s] [ 37%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_validator_options.cpp.o [ 172s] [ 38%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/table.cpp.o [ 172s] [ 38%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/text.cpp.o [ 175s] [ 38%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/text_handler.cpp.o [ 177s] [ 39%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate.cpp.o [ 180s] [ 39%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_adjacency.cpp.o [ 181s] [ 39%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_annotation.cpp.o [ 183s] [ 40%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_arithmetics.cpp.o [ 185s] [ 40%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_atomics.cpp.o [ 186s] [ 40%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_barriers.cpp.o [ 188s] [ 41%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_bitwise.cpp.o [ 189s] [ 41%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_builtins.cpp.o [ 195s] [ 42%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_capability.cpp.o [ 197s] [ 42%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_cfg.cpp.o [ 201s] [ 42%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_composites.cpp.o [ 203s] [ 43%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_constants.cpp.o [ 204s] [ 43%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_conversion.cpp.o [ 206s] [ 43%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_datarules.cpp.o [ 207s] [ 44%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_debug.cpp.o [ 209s] [ 44%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_decorations.cpp.o [ 212s] [ 45%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_derivatives.cpp.o [ 213s] [ 45%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_ext_inst.cpp.o [ 218s] [ 45%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_execution_limitations.cpp.o [ 219s] [ 46%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_function.cpp.o [ 220s] [ 46%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_id.cpp.o [ 222s] [ 46%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_image.cpp.o [ 224s] [ 47%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_interfaces.cpp.o [ 226s] [ 47%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_instruction.cpp.o [ 228s] [ 48%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_layout.cpp.o [ 230s] [ 48%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_literals.cpp.o [ 231s] [ 48%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_logicals.cpp.o [ 232s] [ 50%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_memory.cpp.o [ 234s] [ 50%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_mode_setting.cpp.o [ 236s] [ 50%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_non_uniform.cpp.o [ 238s] [ 51%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_primitives.cpp.o [ 239s] [ 51%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_type.cpp.o [ 241s] [ 52%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/basic_block.cpp.o [ 241s] [ 52%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/construct.cpp.o [ 242s] [ 52%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/function.cpp.o [ 245s] [ 53%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/instruction.cpp.o [ 246s] [ 53%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validation_state.cpp.o [ 250s] [ 53%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/timer.cpp.o [ 251s] [ 54%] Linking CXX static library libSPIRV-Tools.a [ 256s] [ 58%] Built target SPIRV-Tools [ 256s] Scanning dependencies of target SPIRV-Tools-opt [ 256s] [ 59%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/aggressive_dead_code_elim_pass.cpp.o [ 265s] [ 59%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/basic_block.cpp.o [ 270s] [ 60%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/block_merge_pass.cpp.o [ 274s] [ 60%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/build_module.cpp.o [ 280s] [ 60%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ccp_pass.cpp.o [ 286s] [ 61%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/cfg_cleanup_pass.cpp.o [ 290s] [ 61%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/cfg.cpp.o [ 297s] [ 61%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/combine_access_chains.cpp.o [ 303s] [ 62%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/common_uniform_elim_pass.cpp.o [ 311s] [ 62%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/compact_ids_pass.cpp.o [ 315s] [ 63%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/composite.cpp.o [ 319s] [ 63%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/const_folding_rules.cpp.o [ 326s] [ 63%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/constants.cpp.o [ 332s] [ 64%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/copy_prop_arrays.cpp.o [ 340s] [ 64%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dead_branch_elim_pass.cpp.o [ 348s] [ 64%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dead_insert_elim_pass.cpp.o [ 353s] [ 65%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dead_variable_elimination.cpp.o [ 357s] [ 65%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/decoration_manager.cpp.o [ 364s] [ 66%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/def_use_manager.cpp.o [ 366s] [ 66%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dominator_analysis.cpp.o [ 370s] [ 66%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dominator_tree.cpp.o [ 376s] [ 67%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/eliminate_dead_constant_pass.cpp.o [ 381s] [ 67%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/eliminate_dead_functions_pass.cpp.o [ 385s] [ 67%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/feature_manager.cpp.o [ 387s] [ 68%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/flatten_decoration_pass.cpp.o [ 392s] [ 68%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/fold.cpp.o [ 397s] [ 69%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/folding_rules.cpp.o [ 406s] [ 69%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/fold_spec_constant_op_and_composite_pass.cpp.o [ 413s] [ 69%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/freeze_spec_constant_value_pass.cpp.o [ 416s] [ 70%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/function.cpp.o [ 418s] [ 70%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/if_conversion.cpp.o [ 425s] [ 70%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inline_exhaustive_pass.cpp.o [ 430s] [ 71%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inline_opaque_pass.cpp.o [ 435s] [ 71%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inline_pass.cpp.o [ 443s] [ 72%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inst_bindless_check_pass.cpp.o [ 450s] [ 72%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/instruction.cpp.o [ 457s] [ 72%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/instruction_list.cpp.o [ 458s] [ 73%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/instrument_pass.cpp.o [ 468s] [ 73%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ir_context.cpp.o [ 476s] [ 73%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ir_loader.cpp.o [ 478s] [ 74%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/licm_pass.cpp.o [ 483s] [ 74%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_access_chain_convert_pass.cpp.o [ 489s] [ 74%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_redundancy_elimination.cpp.o [ 493s] [ 75%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_single_block_elim_pass.cpp.o [ 498s] [ 75%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_single_store_elim_pass.cpp.o [ 502s] [ 76%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_ssa_elim_pass.cpp.o [ 507s] [ 76%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_dependence.cpp.o [ 515s] [ 76%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_dependence_helpers.cpp.o [ 520s] [ 77%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_descriptor.cpp.o [ 528s] [ 77%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_fission.cpp.o [ 536s] [ 77%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_fusion.cpp.o [ 545s] [ 78%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_fusion_pass.cpp.o [ 549s] [ 78%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_peeling.cpp.o [ 559s] [ 79%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_utils.cpp.o [ 569s] [ 79%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_unroller.cpp.o [ 578s] [ 79%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_unswitch_pass.cpp.o [ 589s] [ 80%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/mem_pass.cpp.o [ 597s] [ 80%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/merge_return_pass.cpp.o [ 607s] [ 80%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/module.cpp.o [ 612s] [ 81%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/optimizer.cpp.o [ 623s] [ 81%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/pass.cpp.o [ 627s] [ 82%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/pass_manager.cpp.o [ 631s] [ 82%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/private_to_local_pass.cpp.o [ 636s] [ 82%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/propagator.cpp.o [ 642s] [ 83%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/reduce_load_size.cpp.o [ 647s] [ 83%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/redundancy_elimination.cpp.o [ 652s] [ 83%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/register_pressure.cpp.o [ 659s] [ 84%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/remove_duplicates_pass.cpp.o [ 664s] [ 84%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/replace_invalid_opc.cpp.o [ 669s] [ 85%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/scalar_analysis.cpp.o [ 676s] [ 85%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/scalar_analysis_simplification.cpp.o [ 678s] [ 85%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/scalar_replacement_pass.cpp.o [ 687s] [ 86%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/set_spec_constant_default_value_pass.cpp.o [ 692s] [ 86%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/simplification_pass.cpp.o [ 697s] [ 86%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ssa_rewrite_pass.cpp.o [ 704s] [ 87%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/strength_reduction_pass.cpp.o [ 708s] [ 87%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/strip_debug_info_pass.cpp.o [ 712s] [ 87%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/strip_reflect_info_pass.cpp.o [ 716s] [ 88%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/struct_cfg_analysis.cpp.o [ 721s] [ 88%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/type_manager.cpp.o [ 729s] [ 89%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/types.cpp.o [ 733s] [ 89%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/unify_const_pass.cpp.o [ 737s] [ 89%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/value_number_table.cpp.o [ 742s] [ 90%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/vector_dce.cpp.o [ 748s] [ 90%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/workaround1209.cpp.o [ 752s] [ 90%] Linking CXX static library libSPIRV-Tools-opt.a [ 780s] [ 90%] Built target SPIRV-Tools-opt [ 780s] Scanning dependencies of target SPIRV-Tools-link [ 780s] [ 90%] Building CXX object source/link/CMakeFiles/SPIRV-Tools-link.dir/linker.cpp.o [ 790s] [ 90%] Linking CXX static library libSPIRV-Tools-link.a [ 790s] [ 90%] Built target SPIRV-Tools-link [ 790s] Scanning dependencies of target spirv-opt [ 790s] [ 90%] Building CXX object tools/CMakeFiles/spirv-opt.dir/opt/opt.cpp.o [ 792s] [ 91%] Building CXX object tools/CMakeFiles/spirv-opt.dir/util/cli_consumer.cpp.o [ 792s] [ 91%] Linking CXX executable spirv-opt [ 796s] [ 91%] Built target spirv-opt [ 796s] Scanning dependencies of target spirv-as [ 796s] [ 91%] Building CXX object tools/CMakeFiles/spirv-as.dir/as/as.cpp.o [ 796s] [ 91%] Linking CXX executable spirv-as [ 796s] [ 91%] Built target spirv-as [ 796s] Scanning dependencies of target spirv-dis [ 796s] [ 91%] Building CXX object tools/CMakeFiles/spirv-dis.dir/dis/dis.cpp.o [ 797s] [ 91%] Linking CXX executable spirv-dis [ 797s] [ 91%] Built target spirv-dis [ 797s] Scanning dependencies of target spirv-stats [ 797s] [ 92%] Building CXX object tools/CMakeFiles/spirv-stats.dir/stats/stats.cpp.o [ 798s] [ 92%] Building CXX object tools/CMakeFiles/spirv-stats.dir/stats/stats_analyzer.cpp.o [ 805s] [ 92%] Building CXX object tools/CMakeFiles/spirv-stats.dir/stats/spirv_stats.cpp.o [ 808s] [ 93%] Linking CXX executable spirv-stats [ 809s] [ 93%] Built target spirv-stats [ 809s] Scanning dependencies of target spirv-val [ 809s] [ 94%] Building CXX object tools/CMakeFiles/spirv-val.dir/val/val.cpp.o [ 809s] [ 94%] Building CXX object tools/CMakeFiles/spirv-val.dir/util/cli_consumer.cpp.o [ 810s] [ 95%] Linking CXX executable spirv-val [ 810s] [ 95%] Built target spirv-val [ 810s] Scanning dependencies of target spirv-cfg [ 810s] [ 96%] Building CXX object tools/CMakeFiles/spirv-cfg.dir/cfg/cfg.cpp.o [ 811s] [ 96%] Building CXX object tools/CMakeFiles/spirv-cfg.dir/cfg/bin_to_dot.cpp.o [ 812s] [ 97%] Linking CXX executable spirv-cfg [ 812s] [ 97%] Built target spirv-cfg [ 812s] Scanning dependencies of target spirv-link [ 812s] [ 98%] Building CXX object tools/CMakeFiles/spirv-link.dir/link/linker.cpp.o [ 813s] [ 98%] Linking CXX executable spirv-link [ 814s] [ 98%] Built target spirv-link [ 814s] Scanning dependencies of target spirv-tools-cpp-example [ 814s] [ 98%] Building CXX object examples/cpp-interface/CMakeFiles/spirv-tools-cpp-example.dir/main.cpp.o [ 815s] [100%] Linking CXX executable spirv-tools-cpp-example [ 819s] [100%] Built target spirv-tools-cpp-example [ 819s] + exit 0 [ 819s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.hPTkCW [ 819s] + umask 022 [ 819s] + cd /home/abuild/rpmbuild/BUILD [ 819s] + cd spirv-tools-2018.6 [ 819s] + LANG=C [ 819s] + export LANG [ 819s] + unset DISPLAY [ 819s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 [ 819s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 [ 819s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 [ 819s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 install [ 819s] [ 0%] Built target spirv-tools-shared-pkg-config [ 819s] [ 0%] Built target spirv-tools-pkg-config [ 819s] [ 29%] Built target SPIRV-Tools-shared [ 819s] [ 58%] Built target SPIRV-Tools [ 819s] [ 90%] Built target SPIRV-Tools-opt [ 819s] [ 90%] Built target SPIRV-Tools-link [ 819s] [ 91%] Built target spirv-opt [ 819s] [ 91%] Built target spirv-as [ 819s] [ 91%] Built target spirv-dis [ 819s] [ 93%] Built target spirv-stats [ 819s] [ 95%] Built target spirv-val [ 819s] [ 97%] Built target spirv-cfg [ 819s] [ 98%] Built target spirv-link [ 819s] [100%] Built target spirv-tools-cpp-example [ 819s] Install the project... [ 819s] -- Install configuration: "Debug" [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/include/spirv-tools/libspirv.h [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/include/spirv-tools/libspirv.hpp [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/include/spirv-tools/optimizer.hpp [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/include/spirv-tools/linker.hpp [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/include/spirv-tools/instrument.hpp [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/pkgconfig/SPIRV-Tools.pc [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/pkgconfig/SPIRV-Tools-shared.pc [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/libSPIRV-Tools.a [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/libSPIRV-Tools-shared.so [ 819s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/libSPIRV-Tools-opt.a [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/libSPIRV-Tools-link.a [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-as [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-dis [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-val [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-opt [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-stats [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-cfg [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-link [ 820s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-lesspipe.sh [ 820s] + rm -f /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/share/info/dir [ 820s] + find /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 -regex '.*\.la$' [ 820s] + xargs rm -f -- [ 820s] + find /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 -regex '.*\.a$' [ 820s] + xargs rm -f -- [ 820s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64 [ 820s] + cp -a source/libSPIRV-Tools-shared.so source/libSPIRV-Tools.a /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/ [ 820s] + cp -a source/opt/libSPIRV-Tools-opt.a /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/ [ 821s] + cp -a source/link/libSPIRV-Tools-link.a /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/ [ 821s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 2018.6-3.85 --unique-debug-src-base spirv-tools-2018.6-3.85.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6 [ 821s] 1+0 records in [ 821s] 1+0 records out [ 821s] 1+0 records in [ 821s] 1+0 records out [ 821s] 7 bytes (7 B) copied7 bytes (7 B) copied1+0 records in [ 821s] 1+0 records out [ 821s] 7 bytes (7 B) copied1+0 records in [ 821s] 1+0 records out [ 821s] 7 bytes (7 B) copied, 0.000502286 s, 13.9 kB/s [ 821s] , 0.000539114 s, 13.0 kB/s [ 821s] , 0.000498608 s, 14.0 kB/s [ 821s] , 0.000499915 s, 14.0 kB/s [ 821s] 1+0 records in [ 821s] 1+0 records out [ 821s] 1+0 records in [ 821s] 1+0 records out [ 821s] 7 bytes (7 B) copied7 bytes (7 B) copied1+0 records in [ 821s] 1+0 records out [ 821s] 7 bytes (7 B) copied1+0 records in [ 821s] 1+0 records out [ 821s] , 0.000848379 s, 8.3 kB/s [ 821s] , 0.000839109 s, 8.3 kB/s [ 821s] 7 bytes (7 B) copied, 0.0008537 s, 8.2 kB/s [ 822s] , 0.000850466 s, 8.2 kB/s [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-cfg [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-as [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-link [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-dis [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-opt [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-stats [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/bin/spirv-val [ 822s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/lib64/libSPIRV-Tools-shared.so [ 822s] 0+0 records in [ 822s] 0+0 records out [ 822s] 0 bytes (0 B) copied, 0.000366524 s, 0.0 kB/s [ 822s] 0+0 records in [ 822s] 0+0 records out [ 822s] 0 bytes (0 B) copied, 0.000373189 s, 0.0 kB/s [ 822s] 0+0 records in [ 822s] 0+0 records out [ 822s] 0 bytes (0 B) copied, 0.000378693 s, 0.0 kB/s [ 822s] 0+0 records in [ 822s] 0+0 records out [ 822s] 0 bytes (0 B) copied, 0.000363982 s, 0.0 kB/s [ 823s] 0+0 records in [ 823s] 0+0 records out [ 823s] 0 bytes (0 B) copied, 0.000357149 s, 0.0 kB/s [ 823s] 0+0 records in [ 823s] 0+0 records out [ 823s] 0 bytes (0 B) copied, 0.000360844 s, 0.0 kB/s [ 824s] 0+0 records in [ 824s] 0+0 records out [ 824s] 0 bytes (0 B) copied, 0.000362912 s, 0.0 kB/s [ 827s] 0+0 records in [ 827s] 0+0 records out [ 827s] 0 bytes (0 B) copied, 0.000357688 s, 0.0 kB/s [ 828s] 6742 blocks [ 828s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6/spirv-tools-debuginfo.manifest [ 828s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6/spirv-tools-debugsource.manifest [ 828s] + /usr/lib/rpm/check-buildroot [ 828s] + /usr/lib/rpm//brp-compress [ 828s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 829s] + /usr/lib/rpm/brp-python-hardlink [ 829s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 [ 829s] Processing files: spirv-tools-2018.6-3.85.aarch64 [ 829s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 829s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 829s] [ 829s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.LlPc3U [ 829s] + umask 022 [ 829s] + cd /home/abuild/rpmbuild/BUILD [ 829s] + cd spirv-tools-2018.6 [ 829s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/share/licenses/spirv-tools [ 829s] + export LC_ALL=C [ 829s] + LC_ALL=C [ 829s] + export LICENSEDIR [ 829s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/share/licenses/spirv-tools [ 829s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64/usr/share/licenses/spirv-tools [ 829s] + exit 0 [ 829s] warning: File listed twice: /usr/lib64/libSPIRV-Tools-link.a [ 829s] warning: File listed twice: /usr/lib64/libSPIRV-Tools-opt.a [ 829s] warning: File listed twice: /usr/lib64/libSPIRV-Tools.a [ 829s] Provides: libSPIRV-Tools-shared.so()(64bit) spirv-tools = 2018.6-3.85 spirv-tools(aarch-64) = 2018.6-3.85 [ 829s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 829s] Requires: /bin/bash ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.5)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.14)(64bit) libstdc++.so.6(GLIBCXX_3.4.15)(64bit) libstdc++.so.6(GLIBCXX_3.4.18)(64bit) libstdc++.so.6(GLIBCXX_3.4.20)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.26)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 829s] Processing files: spirv-tools-debugsource-2018.6-3.85.aarch64 [ 829s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 829s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 829s] [ 830s] Provides: spirv-tools-debugsource = 2018.6-3.85 spirv-tools-debugsource(aarch-64) = 2018.6-3.85 [ 830s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 830s] Processing files: spirv-tools-devel-2018.6-3.85.aarch64 [ 830s] Provides: pkgconfig(SPIRV-Tools) = 2018.7.0 pkgconfig(SPIRV-Tools-shared) = 2018.7.0 spirv-tools-devel = 2018.6-3.85 spirv-tools-devel(aarch-64) = 2018.6-3.85 [ 830s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 830s] Requires: /usr/bin/pkg-config [ 830s] Processing files: spirv-tools-debuginfo-2018.6-3.85.aarch64 [ 830s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 830s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 830s] [ 832s] Provides: spirv-tools-debuginfo = 2018.6-3.85 spirv-tools-debuginfo(aarch-64) = 2018.6-3.85 [ 832s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 832s] Recommends: spirv-tools-debugsource(aarch-64) = 2018.6-3.85 [ 832s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 [ 832s] Wrote: /home/abuild/rpmbuild/SRPMS/spirv-tools-2018.6-3.85.src.rpm [ 838s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-2018.6-3.85.aarch64.rpm [ 839s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-debugsource-2018.6-3.85.aarch64.rpm [ 839s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-devel-2018.6-3.85.aarch64.rpm [ 856s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-debuginfo-2018.6-3.85.aarch64.rpm [ 856s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.7ITNgT [ 856s] + umask 022 [ 856s] + cd /home/abuild/rpmbuild/BUILD [ 856s] + cd spirv-tools-2018.6 [ 856s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.85.aarch64 [ 859s] + exit 0 [ 859s] ... checking for files with abuild user/group [ 859s] ... creating baselibs [ 860s] ... comparing built packages with the former built [ 860s] /usr/lib/build/pkg-diff.sh [ 860s] compare /.build.oldpackages/spirv-tools-2018.6-3.84.src.rpm /home/abuild/rpmbuild/SRPMS/spirv-tools-2018.6-3.85.src.rpm [ 860s] This is not a prerelease project. Compare the project name. [ 860s] comparing rpmtags [ 860s] comparing RELEASE [ 860s] comparing PROVIDES [ 860s] comparing scripts [ 860s] comparing filelist [ 860s] comparing file checksum [ 860s] RPM meta information is identical [ 860s] compare /.build.oldpackages/spirv-tools-2018.6-3.84.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-2018.6-3.85.aarch64.rpm [ 860s] Comparing spirv-tools-2018.6-3.84.aarch64.rpm to spirv-tools-2018.6-3.85.aarch64.rpm [ 860s] This is not a prerelease project. Compare the project name. [ 860s] comparing rpmtags [ 860s] comparing RELEASE [ 860s] comparing PROVIDES [ 860s] comparing scripts [ 860s] comparing filelist [ 860s] comparing file checksum [ 860s] creating rename script [ 860s] RPM file checksum differs. [ 860s] Extracting packages [ 862s] /usr/bin/spirv-as: only difference was in build-id or gnu_debuglink, GOOD. [ 862s] /usr/bin/spirv-cfg: only difference was in build-id or gnu_debuglink, GOOD. [ 863s] /usr/bin/spirv-dis: only difference was in build-id or gnu_debuglink, GOOD. [ 867s] /usr/bin/spirv-link: only difference was in build-id or gnu_debuglink, GOOD. [ 875s] /usr/bin/spirv-opt: only difference was in build-id or gnu_debuglink, GOOD. [ 877s] /usr/bin/spirv-stats: only difference was in build-id or gnu_debuglink, GOOD. [ 879s] /usr/bin/spirv-val: only difference was in build-id or gnu_debuglink, GOOD. [ 880s] /usr/lib64/linker.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 882s] /usr/lib64/aggressive_dead_code_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 882s] /usr/lib64/basic_block.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 883s] /usr/lib64/block_merge_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 883s] /usr/lib64/build_module.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 884s] /usr/lib64/ccp_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 884s] /usr/lib64/cfg_cleanup_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 885s] /usr/lib64/cfg.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 886s] /usr/lib64/combine_access_chains.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 887s] /usr/lib64/common_uniform_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 887s] /usr/lib64/compact_ids_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 887s] /usr/lib64/composite.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 888s] /usr/lib64/const_folding_rules.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 890s] /usr/lib64/constants.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 892s] /usr/lib64/copy_prop_arrays.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 893s] /usr/lib64/dead_branch_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 893s] /usr/lib64/dead_insert_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 894s] /usr/lib64/dead_variable_elimination.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 894s] /usr/lib64/decoration_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 894s] /usr/lib64/def_use_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 894s] /usr/lib64/dominator_analysis.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 895s] /usr/lib64/dominator_tree.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 895s] /usr/lib64/eliminate_dead_constant_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 896s] /usr/lib64/eliminate_dead_functions_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 896s] /usr/lib64/feature_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 897s] /usr/lib64/flatten_decoration_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 897s] /usr/lib64/fold.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 898s] /usr/lib64/folding_rules.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 899s] /usr/lib64/fold_spec_constant_op_and_composite_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 899s] /usr/lib64/freeze_spec_constant_value_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 900s] /usr/lib64/function.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 902s] /usr/lib64/if_conversion.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 902s] /usr/lib64/inline_exhaustive_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 903s] /usr/lib64/inline_opaque_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 904s] /usr/lib64/inline_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 906s] /usr/lib64/inst_bindless_check_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 907s] /usr/lib64/instruction.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 907s] /usr/lib64/instruction_list.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 909s] /usr/lib64/instrument_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 912s] /usr/lib64/ir_context.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 912s] /usr/lib64/ir_loader.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 912s] /usr/lib64/licm_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 913s] /usr/lib64/local_access_chain_convert_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 913s] /usr/lib64/local_redundancy_elimination.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 914s] /usr/lib64/local_single_block_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 914s] /usr/lib64/local_single_store_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 915s] /usr/lib64/local_ssa_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 916s] /usr/lib64/loop_dependence.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 916s] /usr/lib64/loop_dependence_helpers.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 917s] /usr/lib64/loop_descriptor.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 919s] /usr/lib64/loop_fission.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 920s] /usr/lib64/loop_fusion.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 920s] /usr/lib64/loop_fusion_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 923s] /usr/lib64/loop_peeling.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 925s] /usr/lib64/loop_utils.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 927s] /usr/lib64/loop_unroller.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 928s] /usr/lib64/loop_unswitch_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 929s] /usr/lib64/mem_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 932s] /usr/lib64/merge_return_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 932s] /usr/lib64/module.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 933s] /usr/lib64/optimizer.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 933s] /usr/lib64/pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 933s] /usr/lib64/pass_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 934s] /usr/lib64/private_to_local_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 935s] /usr/lib64/propagator.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 936s] /usr/lib64/reduce_load_size.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 936s] /usr/lib64/redundancy_elimination.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 937s] /usr/lib64/register_pressure.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 937s] /usr/lib64/remove_duplicates_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 938s] /usr/lib64/replace_invalid_opc.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 939s] /usr/lib64/scalar_analysis.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 940s] /usr/lib64/scalar_analysis_simplification.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 940s] /usr/lib64/scalar_replacement_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 941s] /usr/lib64/set_spec_constant_default_value_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 941s] /usr/lib64/simplification_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 942s] /usr/lib64/ssa_rewrite_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 943s] /usr/lib64/strength_reduction_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 944s] /usr/lib64/strip_debug_info_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 944s] /usr/lib64/strip_reflect_info_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 944s] /usr/lib64/struct_cfg_analysis.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 947s] /usr/lib64/type_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 952s] /usr/lib64/types.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 953s] /usr/lib64/unify_const_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 953s] /usr/lib64/value_number_table.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 953s] /usr/lib64/vector_dce.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 954s] /usr/lib64/workaround1209.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 956s] /usr/lib64/libSPIRV-Tools-shared.so: only difference was in build-id or gnu_debuglink, GOOD. [ 956s] /usr/lib64/bit_vector.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/parse_number.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/string_utils.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/assembly_grammar.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/binary.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/diagnostic.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/disassemble.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/enum_string_mapping.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 957s] /usr/lib64/ext_inst.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/extensions.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/id_descriptor.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/libspirv.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/name_mapper.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/opcode.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/operand.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/parsed_operand.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/print.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/software_version.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 958s] /usr/lib64/spirv_endian.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 959s] /usr/lib64/spirv_optimizer_options.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 959s] /usr/lib64/spirv_target_env.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 959s] /usr/lib64/spirv_validator_options.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 959s] /usr/lib64/table.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 959s] /usr/lib64/text.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 959s] /usr/lib64/text_handler.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_adjacency.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_annotation.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_arithmetics.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_atomics.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_barriers.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_bitwise.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 960s] /usr/lib64/validate_builtins.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 961s] /usr/lib64/validate_capability.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 961s] /usr/lib64/validate_cfg.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 961s] /usr/lib64/validate_composites.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 961s] /usr/lib64/validate_constants.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 961s] /usr/lib64/validate_conversion.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_datarules.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_debug.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_decorations.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_derivatives.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_ext_inst.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_execution_limitations.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 962s] /usr/lib64/validate_function.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_id.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_image.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_interfaces.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_instruction.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_layout.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_literals.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_logicals.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 963s] /usr/lib64/validate_memory.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 964s] /usr/lib64/validate_mode_setting.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 964s] /usr/lib64/validate_non_uniform.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 964s] /usr/lib64/validate_primitives.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 964s] /usr/lib64/validate_type.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 964s] /usr/lib64/basic_block.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 964s] /usr/lib64/construct.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 965s] /usr/lib64/function.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 965s] /usr/lib64/instruction.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 965s] /usr/lib64/validation_state.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 965s] /usr/lib64/timer.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 965s] Package content is identical [ 965s] compare /.build.oldpackages/spirv-tools-debuginfo-2018.6-3.84.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-debuginfo-2018.6-3.85.aarch64.rpm [ 965s] skipping -debuginfo package [ 965s] compare /.build.oldpackages/spirv-tools-debugsource-2018.6-3.84.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-debugsource-2018.6-3.85.aarch64.rpm [ 965s] Comparing spirv-tools-debugsource-2018.6-3.84.aarch64.rpm to spirv-tools-debugsource-2018.6-3.85.aarch64.rpm [ 965s] This is not a prerelease project. Compare the project name. [ 965s] comparing rpmtags [ 965s] comparing RELEASE [ 965s] comparing PROVIDES [ 965s] comparing scripts [ 965s] comparing filelist [ 965s] comparing file checksum [ 966s] creating rename script [ 966s] RPM meta information is identical [ 966s] compare /.build.oldpackages/spirv-tools-devel-2018.6-3.84.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/spirv-tools-devel-2018.6-3.85.aarch64.rpm [ 966s] Comparing spirv-tools-devel-2018.6-3.84.aarch64.rpm to spirv-tools-devel-2018.6-3.85.aarch64.rpm [ 966s] This is not a prerelease project. Compare the project name. [ 966s] comparing rpmtags [ 966s] comparing RELEASE [ 966s] comparing PROVIDES [ 966s] comparing scripts [ 966s] comparing filelist [ 966s] comparing file checksum [ 966s] creating rename script [ 966s] RPM meta information is identical [ 966s] compare validated built as identical ! [ 966s] [ 966s] obspw27 finished "build spirv-tools.spec" at Mon May 3 18:12:50 UTC 2021. [ 966s]