[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_8 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obsnw12 started "build _service:gbs:xdelta3.spec" at Wed Mar 3 11:44:07 UTC 2021. [ 0s] [ 0s] Building xdelta3 for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '830b9f07d20fae24523c82d9da8a1b72' [ 0s] [ 0s] processing recipe /var/cache/build/root_8/.build-srcdir/_service:gbs:xdelta3.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_8/.build-srcdir/_service:gbs:xdelta3.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_8/.build.rpmlist /var/cache/build/root_8/.build-srcdir/_service:gbs:xdelta3.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/8/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 7s] [31/41] preinstalling libmount... [ 7s] [32/41] preinstalling smack... [ 7s] [33/41] preinstalling bzip2... [ 7s] [34/41] preinstalling libmagic... [ 7s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/96] installing libmagic-data-5.39-4.96 [ 9s] [2/96] installing setup-0.9-4.26 [ 9s] [3/96] installing filesystem-3.1-3.3 [ 9s] [4/96] installing glibc-2.30-6.14 [ 9s] [5/96] installing bash-3.2.57-4.4 [ 9s] [6/96] installing cpio-2.8-5.2 [ 9s] [7/96] installing diffutils-3.3-4.2 [ 9s] [8/96] installing findutils-4.3.8-3.167 [ 9s] [9/96] installing gdbm-1.8.3-3.190 [ 10s] [10/96] installing hostname-3.23-3.2 [ 10s] [11/96] installing libatomic-9.2.0-8.13 [ 10s] [12/96] installing libattr-2.4.48-4.113 [ 10s] [13/96] installing libblkid-2.36-7.18 [ 11s] [14/96] installing libbz2-1.0.8-4.129 [ 11s] [15/96] installing libcap-2.24-3.175 [ 11s] [16/96] installing libext2fs-1.46.0-4.4 [ 12s] [17/96] installing libfreebl3-3.34.1-3.136 [ 12s] [18/96] installing libgcc-9.2.0-8.13 [ 12s] [19/96] installing libgomp-9.2.0-8.13 [ 12s] [20/96] installing libitm-9.2.0-8.13 [ 13s] [21/96] installing libltdl-2.4.2-3.138 [ 13s] [22/96] installing liblua-5.1.5-3.128 [ 13s] [23/96] installing liblzma-5.2.5-4.54 [ 14s] [24/96] installing libopenssl11-1.1.1i-4.18 [ 14s] [25/96] installing libpcre-8.44-4.17 [ 14s] [26/96] installing libpopt-1.16-3.174 [ 14s] [27/96] installing libsmack-1.3.1-3.170 [ 15s] [28/96] installing libsmartcols-2.36-7.18 [ 15s] [29/96] installing libsqlite-3.33.0-4.98 [ 15s] [30/96] installing libuuid-2.36-7.18 [ 16s] [31/96] installing libzstd1-1.4.5-1.69 [ 16s] [32/96] installing m4-1.4.17-3.2 [ 16s] [33/96] installing net-tools-2.0_20121208git-4.3 [ 16s] [34/96] installing nspr-4.12-3.174 [ 16s] [35/96] installing patch-2.7-3.166 [ 16s] [36/96] installing pkg-config-0.28-3.166 [ 16s] [37/96] installing sed-4.1c-3.3 [ 17s] [38/96] installing update-alternatives-1.20.5-3.3 [ 17s] [39/96] installing which-2.17-4.3 [ 17s] [40/96] installing zlib-1.2.11-3.178 [ 17s] [41/96] installing build-compare-2015.04.28-3.65 [ 17s] [42/96] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 19s] [43/96] installing terminfo-base-full-6.2-5.88 [ 19s] [44/96] installing coreutils-6.9-4.47 [ 19s] [45/96] installing cpp-9.2.0-8.13 [ 20s] [46/96] installing gawk-3.1.5-4.3 [ 20s] [47/96] installing gcc-c++-9.2.0-8.13 [ 21s] [48/96] installing grep-2.5.2-3.3 [ 21s] [49/96] installing libacl-2.2.53-4.113 [ 21s] [50/96] installing libelf-0.178-3.90 [ 21s] [51/96] installing libgfortran-9.2.0-8.13 [ 22s] [52/96] installing libmount-2.36-7.18 [ 22s] [53/96] installing libstdc++-9.2.0-8.13 [ 22s] [54/96] installing make-4.0-2.45 [ 23s] [55/96] installing nss-certs-3.34.1-3.136 [ 23s] [56/96] installing smack-1.3.1-3.170 [ 23s] [57/96] installing bzip2-1.0.8-4.129 [ 23s] [58/96] installing libfdisk-2.36-7.18 [ 23s] [59/96] installing libmagic-5.39-4.96 [ 23s] [60/96] installing libxml2-2.9.10-4.12 [ 24s] [61/96] installing perl-5.32.0-4.46 [ 26s] [62/96] installing xz-5.2.5-4.54 [ 26s] [63/96] installing build-mkbaselibs-20120927-3.3 [ 26s] [64/96] installing libstdc++-devel-9.2.0-8.13 [ 27s] [65/96] installing file-5.39-4.96 [ 27s] [66/96] installing linux-glibc-devel-3.10-4.17 [ 27s] [67/96] installing tar-1.17-2.5 [ 27s] [68/96] installing autoconf-2.69-3.105 [ 28s] [69/96] installing binutils-2.33.1-7.74 [ 28s] [70/96] installing glibc-locale-2.30-6.14 [ 29s] [71/96] installing gzip-1.3.12-3.175 [ 29s] [72/96] installing libcc1-9.2.0-8.13 [ 29s] [73/96] installing libubsan-9.2.0-8.13 [ 29s] [74/96] installing pam-1.1.6-3.3 [ 30s] [75/96] installing libncurses6-6.2-5.88 [ 30s] [76/96] installing tzdata-2020a-3.3 [ 30s] [77/96] installing libdw-0.178-3.90 [ 31s] [78/96] installing libarchive-3.5.1-2.15 [ 31s] [79/96] installing libncurses-6.2-5.88 [ 31s] [80/96] installing glibc-devel-2.30-6.14 [ 31s] [81/96] installing less-466-3.3 [ 31s] [82/96] installing libreadline-5.2-3.46 [ 32s] [83/96] installing procps-ng-3.3.16-3.3 [ 32s] [84/96] installing automake-1.15.1-3.123 [ 32s] [85/96] installing libasm-0.178-3.90 [ 32s] [86/96] installing build-20120927-3.3 [ 32s] [87/96] installing gcc-9.2.0-8.13 [ 33s] [88/96] installing qemu-accel-x86_64-aarch64-0.4-5.8 [ 40s] [89/96] installing libtool-2.4.2-3.138 [ 41s] [90/96] installing elfutils-0.178-3.90 [ 41s] [91/96] installing util-linux-2.36-7.18 [ 41s] [92/96] installing util-linux-su-2.36-7.18 [ 41s] [93/96] installing nss-3.34.1-3.136 [ 41s] [94/96] installing libsoftokn3-3.34.1-3.136 [ 41s] [95/96] installing rpm-4.14.1.1-7.4 [ 42s] [96/96] installing rpm-build-4.14.1.1-7.4 [ 42s] removing nis flags from /var/cache/build/root_8/etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 42s] Running build time source services... [ 43s] build target is aarch64-tizen-linux [ 43s] ----------------------------------------------------------------- [ 43s] I have the following modifications for xdelta3.spec: [ 43s] 5c5 [ 43s] < Release: 1 [ 43s] --- [ 43s] > Release: 3.16 [ 43s] ----------------------------------------------------------------- [ 43s] ----- building xdelta3.spec (user abuild) [ 43s] ----------------------------------------------------------------- [ 43s] ----------------------------------------------------------------- [ 43s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/830b9f07d20fae24523c82d9da8a1b72-xdelta3' -ba /home/abuild/rpmbuild/SOURCES/xdelta3.spec [ 43s] Building target platforms: aarch64-tizen-linux [ 43s] Building for target aarch64-tizen-linux [ 43s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8Zs1rI [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + rm -rf xdelta3-3.0.11 [ 43s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xdelta3-3.0.11.tar.gz [ 43s] + /bin/tar -xof - [ 43s] + STATUS=0 [ 43s] + '[' 0 -ne 0 ']' [ 43s] + cd xdelta3-3.0.11 [ 43s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 43s] + exit 0 [ 43s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lDtxCH [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd xdelta3-3.0.11 [ 43s] ++ uname -m [ 43s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 43s] + ref=/usr/lib/rpm [ 43s] + for s in guess sub [ 43s] ++ find -maxdepth 8 -name config.guess [ 43s] + for s in guess sub [ 43s] ++ find -maxdepth 8 -name config.sub [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LDFLAGS= [ 43s] + export LDFLAGS [ 43s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE' [ 43s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE' [ 43s] + export 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE' [ 43s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE' [ 43s] + export LDFLAGS [ 43s] + cp /home/abuild/rpmbuild/SOURCES/xdelta3.manifest . [ 43s] + libtoolize -c -f [ 43s] libtoolize: putting auxiliary files in `.'. [ 43s] libtoolize: copying file `./ltmain.sh' [ 43s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 43s] libtoolize: copying file `m4/libtool.m4' [ 43s] libtoolize: copying file `m4/ltoptions.m4' [ 43s] libtoolize: copying file `m4/ltsugar.m4' [ 43s] libtoolize: copying file `m4/ltversion.m4' [ 43s] libtoolize: copying file `m4/lt~obsolete.m4' [ 43s] + aclocal [ 50s] + autoheader [ 51s] + autoconf [ 54s] + automake -a -c [ 56s] configure.ac:5: installing './compile' [ 56s] configure.ac:5: installing './config.guess' [ 56s] configure.ac:5: installing './config.sub' [ 56s] configure.ac:6: installing './missing' [ 56s] Makefile.am: installing './depcomp' [ 57s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr 'LDFLAGS= -pie' [ 57s] checking build system type... aarch64-tizen-linux-gnu [ 57s] checking host system type... aarch64-tizen-linux-gnu [ 57s] checking how to print strings... printf [ 57s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 57s] checking whether the C compiler works... yes [ 57s] checking for C compiler default output file name... a.out [ 57s] checking for suffix of executables... [ 57s] checking whether we are cross compiling... no [ 57s] checking for suffix of object files... o [ 57s] checking whether we are using the GNU C compiler... yes [ 57s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 57s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 57s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 57s] checking for a sed that does not truncate output... /bin/sed [ 57s] checking for grep that handles long lines and -e... /bin/grep [ 57s] checking for egrep... /bin/grep -E [ 57s] checking for fgrep... /bin/grep -F [ 57s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 57s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 57s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 57s] checking the name lister (/bin/nm -B) interface... BSD nm [ 57s] checking whether ln -s works... yes [ 57s] checking the maximum length of command line arguments... 1572864 [ 58s] checking whether the shell understands some XSI constructs... yes [ 58s] checking whether the shell understands "+="... yes [ 58s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 58s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 58s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 58s] checking for aarch64-tizen-linux-gnu-objdump... no [ 58s] checking for objdump... objdump [ 58s] checking how to recognize dependent libraries... pass_all [ 58s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 58s] checking for dlltool... no [ 58s] checking how to associate runtime and link libraries... printf %s\n [ 58s] checking for aarch64-tizen-linux-gnu-ar... no [ 58s] checking for ar... ar [ 58s] checking for archiver @FILE support... @ [ 58s] checking for aarch64-tizen-linux-gnu-strip... no [ 58s] checking for strip... strip [ 58s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 58s] checking for ranlib... ranlib [ 58s] checking for gawk... gawk [ 58s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 58s] checking for sysroot... no [ 58s] checking for aarch64-tizen-linux-gnu-mt... no [ 58s] checking for mt... no [ 58s] checking if : is a manifest tool... no [ 58s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 58s] checking for ANSI C header files... yes [ 58s] checking for sys/types.h... yes [ 58s] checking for sys/stat.h... yes [ 58s] checking for stdlib.h... yes [ 58s] checking for string.h... yes [ 58s] checking for memory.h... yes [ 58s] checking for strings.h... yes [ 58s] checking for inttypes.h... yes [ 58s] checking for stdint.h... yes [ 58s] checking for unistd.h... yes [ 58s] checking for dlfcn.h... yes [ 58s] checking for objdir... .libs [ 58s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 58s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 58s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 58s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 58s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 58s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 58s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 58s] checking whether -lc should be explicitly linked in... no [ 58s] checking dynamic linker characteristics... GNU/Linux ld.so [ 58s] checking how to hardcode library paths into programs... immediate [ 58s] checking whether stripping libraries is possible... yes [ 58s] checking if libtool supports shared libraries... yes [ 58s] checking whether to build shared libraries... yes [ 58s] checking whether to build static libraries... yes [ 58s] checking for a BSD-compatible install... /bin/install -c [ 58s] checking whether build environment is sane... yes [ 58s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 58s] checking whether make sets $(MAKE)... yes [ 58s] checking for style of include used by make... GNU [ 58s] checking whether make supports nested variables... yes [ 58s] checking whether UID '399' is supported by ustar format... yes [ 58s] checking whether GID '399' is supported by ustar format... yes [ 58s] checking how to create a ustar tar archive... gnutar [ 59s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 59s] checking if pointers to integers require aligned access... no [ 59s] checking for aarch64-tizen-linux-gnu-gcc... (cached) aarch64-tizen-linux-gnu-gcc [ 59s] checking whether we are using the GNU C compiler... (cached) yes [ 59s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 59s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 59s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 59s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 59s] checking whether we are using the GNU C++ compiler... yes [ 59s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 59s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 59s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 59s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 59s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 59s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 59s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 59s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 59s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 59s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 59s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 59s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 59s] checking how to hardcode library paths into programs... immediate [ 59s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 59s] checking size of size_t... 8 [ 59s] checking size of unsigned int... 4 [ 59s] checking size of unsigned long... 8 [ 59s] checking size of unsigned long long... 8 [ 59s] checking lzma.h usability... no [ 59s] checking lzma.h presence... no [ 59s] checking for lzma.h... no [ 59s] checking for lzma_easy_buffer_encode in -llzma... no [ 59s] checking that generated files are newer than configure... done [ 59s] configure: creating ./config.status [ 60s] config.status: creating Makefile [ 60s] config.status: creating config.h [ 60s] config.status: executing libtool commands [ 60s] config.status: executing depfiles commands [ 60s] + make -j4 [ 60s] make all-am [ 60s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xdelta3-3.0.11' [ 60s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DXD3_DEBUG=0 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -MT xdelta3-xdelta3.o -MD -MP -MF .deps/xdelta3-xdelta3.Tpo -c -o xdelta3-xdelta3.o `test -f 'xdelta3.c' || echo './'`xdelta3.c [ 60s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=0 -DSECONDARY_DJW=0 -DSECONDARY_FGK=0 -DSECONDARY_LZMA=0 -DXD3_MAIN=1 -DXD3_ENCODER=0 -DXD3_STDIO=1 -DEXTERNAL_COMPRESSION=0 -DVCDIFF_TOOLS=0 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -MT xdelta3decode-xdelta3.o -MD -MP -MF .deps/xdelta3decode-xdelta3.Tpo -c -o xdelta3decode-xdelta3.o `test -f 'xdelta3.c' || echo './'`xdelta3.c [ 60s] aarch64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DNOT_MAIN=1 -DXD3_DEBUG=1 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -MT testing/xdelta3regtest-regtest.o -MD -MP -MF testing/.deps/xdelta3regtest-regtest.Tpo -c -o testing/xdelta3regtest-regtest.o `test -f 'testing/regtest.cc' || echo './'`testing/regtest.cc [ 60s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DNOT_MAIN=1 -DXD3_DEBUG=1 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -MT testing/xdelta3regtest-regtest_c.o -MD -MP -MF testing/.deps/xdelta3regtest-regtest_c.Tpo -c -o testing/xdelta3regtest-regtest_c.o `test -f 'testing/regtest_c.c' || echo './'`testing/regtest_c.c [ 60s] In file included from testing/regtest.cc:30: [ 60s] testing/file.h:69:10: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 69 | DP(RINT "%5"Q"x: ", pos); [ 60s] | ^ [ 60s] In file included from testing/regtest.cc:32: [ 60s] testing/delta.h:56:10: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 56 | DP(RINT "%"Q"u run %u\n", winst.position, winst.size); [ 60s] | ^ [ 60s] testing/delta.h:59:10: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 59 | DP(RINT "%"Q"u add %u\n", winst.position, winst.size); [ 60s] | ^ [ 60s] testing/delta.h:62:10: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 62 | DP(RINT "%"Q"u copy %u @ %"Q"u (mode %u)\n", [ 60s] | ^ [ 60s] testing/delta.h:62:14: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 62 | DP(RINT "%"Q"u copy %u @ %"Q"u (mode %u)\n", [ 60s] | ^ [ 60s] testing/regtest.cc:95:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 95 | IF_DEBUG1 (XPR(NTR "source %"Q"u[%"Q"u] target %"Q"u winsize %"Z"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:95:35: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 95 | IF_DEBUG1 (XPR(NTR "source %"Q"u[%"Q"u] target %"Q"u winsize %"Z"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:95:41: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 95 | IF_DEBUG1 (XPR(NTR "source %"Q"u[%"Q"u] target %"Q"u winsize %"Z"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:95:55: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 95 | IF_DEBUG1 (XPR(NTR "source %"Q"u[%"Q"u] target %"Q"u winsize %"Z"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:105:25: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 105 | IF_DEBUG2(XPR(NTR "target in %s: %"Q"u..%"Q"u %"Q"u(%"Q"u) " [ 60s] | ^ [ 60s] testing/regtest.cc:105:43: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 105 | IF_DEBUG2(XPR(NTR "target in %s: %"Q"u..%"Q"u %"Q"u(%"Q"u) " [ 60s] | ^ [ 60s] testing/regtest.cc:105:50: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 105 | IF_DEBUG2(XPR(NTR "target in %s: %"Q"u..%"Q"u %"Q"u(%"Q"u) " [ 60s] | ^ [ 60s] testing/regtest.cc:105:56: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 105 | IF_DEBUG2(XPR(NTR "target in %s: %"Q"u..%"Q"u %"Q"u(%"Q"u) " [ 60s] | ^ [ 60s] testing/regtest.cc:106:7: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 106 | "verified %"Q"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:156:22: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 156 | IF_DEBUG2(XPR(NTR "[srcblock] %"Q"u last srcpos %"Q"u " [ 60s] | ^ [ 60s] testing/regtest.cc:156:37: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 156 | IF_DEBUG2(XPR(NTR "[srcblock] %"Q"u last srcpos %"Q"u " [ 60s] | ^ [ 60s] testing/regtest.cc:157:4: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 157 | "encodepos %"Q"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:234:34: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 234 | snprintf(bbuf, sizeof(bbuf), "-B%"Q"u", options.encode_srcwin_maxsz); [ 60s] | ^ [ 60s] testing/regtest.cc:374:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 374 | snprintf_func (buf, sizeof(buf), "%"Q"u", x); [ 60s] | ^ [ 60s] testing/regtest.cc:816:23: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 816 | IF_DEBUG1(DP(RINT "[stride=%d] changes=%u adds=%"Q"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:1262:10: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 1262 | XPR(NT "Blocksize %"Q"u windowsize %"Z"u\n", [ 60s] | ^ [ 60s] testing/regtest.cc:1262:24: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix] [ 60s] 1262 | XPR(NT "Blocksize %"Q"u windowsize %"Z"u\n", [ 60s] | ^ [ 60s] In file included from xdelta3.c:2108, [ 60s] from xdelta3.c:680: [ 60s] xdelta3-decode.h: In function 'xd3_decode_input': [ 60s] xdelta3-decode.h:865:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 865 | stream->dec_state = DEC_HDRIND; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] xdelta3-decode.h:867:5: note: here [ 60s] 867 | case DEC_HDRIND: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:880:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 880 | stream->dec_state = DEC_SECONDID; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 60s] xdelta3-decode.h:883:5: note: here [ 60s] 883 | case DEC_SECONDID: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:885:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 885 | if ((stream->dec_hdr_ind & VCD_SECONDARY) != 0) [ 60s] | ^ [ 60s] xdelta3-decode.h:903:5: note: here [ 60s] 903 | case DEC_TABLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:909:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 909 | if ((stream->dec_hdr_ind & VCD_CODETABLE) != 0) { [ 60s] | ^ [ 60s] xdelta3-decode.h:916:5: note: here [ 60s] 916 | case DEC_NEAR: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:824:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 824 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:918:7: note: in expansion of macro 'BYTE_CASE' [ 60s] 918 | BYTE_CASE((stream->dec_hdr_ind & VCD_CODETABLE) != 0, [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:920:5: note: here [ 60s] 920 | case DEC_SAME: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:824:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 824 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:922:7: note: in expansion of macro 'BYTE_CASE' [ 60s] 922 | BYTE_CASE((stream->dec_hdr_ind & VCD_CODETABLE) != 0, [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:924:5: note: here [ 60s] 924 | case DEC_TABDAT: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:942:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 942 | stream->dec_state = DEC_APPLEN; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] xdelta3-decode.h:944:5: note: here [ 60s] 944 | case DEC_APPLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:946:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 946 | SIZE_CASE((stream->dec_hdr_ind & VCD_APPHEADER) != 0, [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:949:5: note: here [ 60s] 949 | case DEC_APPDAT: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:981:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 981 | stream->dec_state = DEC_WININD; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] xdelta3-decode.h:983:5: note: here [ 60s] 983 | case DEC_WININD: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:1009:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1009 | stream->dec_state = DEC_CPYLEN; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] xdelta3-decode.h:1015:5: note: here [ 60s] 1015 | case DEC_CPYLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:1024:28: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1024 | stream->dec_position = stream->dec_cpylen; [ 60s] | ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ [ 60s] xdelta3-decode.h:1026:5: note: here [ 60s] 1026 | case DEC_CPYOFF: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:1041:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1041 | if ((stream->dec_win_ind & VCD_TARGET) && [ 60s] | ^ [ 60s] xdelta3-decode.h:1049:5: note: here [ 60s] 1049 | case DEC_ENCLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:1051:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1051 | SIZE_CASE(1, stream->dec_enclen, DEC_TGTLEN); [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:1052:5: note: here [ 60s] 1052 | case DEC_TGTLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:1072:26: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1072 | stream->dec_maxpos = stream->dec_cpylen + stream->dec_tgtlen; [ 60s] | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 60s] xdelta3-decode.h:1074:5: note: here [ 60s] 1074 | case DEC_DELIND: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:1085:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1085 | if ((stream->dec_del_ind != 0) && (stream->sec_type == NULL)) [ 60s] | ^ [ 60s] xdelta3-decode.h:1092:5: note: here [ 60s] 1092 | case DEC_DATALEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:1093:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1093 | SIZE_CASE(1, stream->data_sect.size, DEC_INSTLEN); [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:1094:5: note: here [ 60s] 1094 | case DEC_INSTLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:1095:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1095 | SIZE_CASE(1, stream->inst_sect.size, DEC_ADDRLEN); [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:1096:5: note: here [ 60s] 1096 | case DEC_ADDRLEN: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] xdelta3-decode.h:1097:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1097 | SIZE_CASE(1, stream->addr_sect.size, DEC_CKSUM); [ 60s] | ^~~~~~~~~ [ 60s] xdelta3-decode.h:1099:5: note: here [ 60s] 1099 | case DEC_CKSUM: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:1148:9: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1148 | if ((ret = xd3_decode_sections (stream))) { return ret; } [ 60s] | ^ [ 60s] xdelta3-decode.h:1150:5: note: here [ 60s] 1150 | case DEC_EMIT: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h: In function 'xd3_decode_sections': [ 60s] xdelta3-decode.h:700:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 700 | if ((ret = xd3_decode_section (stream, & stream->data_sect, [ 60s] | ^ [ 60s] xdelta3-decode.h:702:5: note: here [ 60s] 702 | case DEC_INST: [ 60s] | ^~~~ [ 60s] xdelta3-decode.h:703:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 703 | if ((ret = xd3_decode_section (stream, & stream->inst_sect, [ 60s] | ^ [ 60s] xdelta3-decode.h:705:5: note: here [ 60s] 705 | case DEC_ADDR: [ 60s] | ^~~~ [ 60s] In file included from testing/../xdelta3.c:740, [ 60s] from testing/regtest_c.c:2: [ 60s] testing/../xdelta3-main.h: In function 'main_file_read': [ 60s] testing/../xdelta3-main.h:1049:47: warning: cast between incompatible function types from 'ssize_t (*)(int, void *, size_t)' {aka 'long int (*)(int, void *, long unsigned int)'} to 'int (*)(int, uint8_t *, usize_t)' {aka 'int (*)(int, unsigned char *, unsigned int)'} [-Wcast-function-type] [ 60s] 1049 | ret = xd3_posix_io (ifile->file, buf, size, (xd3_posix_func*) &read, nread); [ 60s] | ^ [ 60s] testing/../xdelta3-main.h: In function 'main_file_write': [ 60s] testing/../xdelta3-main.h:1083:47: warning: cast between incompatible function types from 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} to 'int (*)(int, uint8_t *, usize_t)' {aka 'int (*)(int, unsigned char *, unsigned int)'} [-Wcast-function-type] [ 60s] 1083 | ret = xd3_posix_io (ofile->file, buf, size, (xd3_posix_func*) &write, NULL); [ 60s] | ^ [ 60s] In file included from testing/../xdelta3.c:740, [ 60s] from testing/regtest_c.c:2: [ 60s] testing/../xdelta3-main.h: In function 'main_pipe_write': [ 60s] testing/../xdelta3-main.h:2091:7: warning: cast between incompatible function types from 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} to 'int (*)(int, uint8_t *, usize_t)' {aka 'int (*)(int, unsigned char *, unsigned int)'} [-Wcast-function-type] [ 60s] 2091 | (xd3_posix_func*) &write, NULL))) [ 60s] | ^ [ 60s] In file included from xdelta3.c:740: [ 60s] xdelta3-main.h: In function 'main_file_read': [ 60s] xdelta3-main.h:1049:47: warning: cast between incompatible function types from 'ssize_t (*)(int, void *, size_t)' {aka 'long int (*)(int, void *, long unsigned int)'} to 'int (*)(int, uint8_t *, usize_t)' {aka 'int (*)(int, unsigned char *, unsigned int)'} [-Wcast-function-type] [ 60s] 1049 | ret = xd3_posix_io (ifile->file, buf, size, (xd3_posix_func*) &read, nread); [ 60s] | ^ [ 60s] xdelta3-main.h: In function 'main_file_write': [ 60s] xdelta3-main.h:1083:47: warning: cast between incompatible function types from 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} to 'int (*)(int, uint8_t *, usize_t)' {aka 'int (*)(int, unsigned char *, unsigned int)'} [-Wcast-function-type] [ 60s] 1083 | ret = xd3_posix_io (ofile->file, buf, size, (xd3_posix_func*) &write, NULL); [ 60s] | ^ [ 60s] In file included from xdelta3.c:740: [ 60s] xdelta3-main.h: In function 'main_pipe_write': [ 60s] xdelta3-main.h:2091:7: warning: cast between incompatible function types from 'ssize_t (*)(int, const void *, size_t)' {aka 'long int (*)(int, const void *, long unsigned int)'} to 'int (*)(int, uint8_t *, usize_t)' {aka 'int (*)(int, unsigned char *, unsigned int)'} [-Wcast-function-type] [ 60s] 2091 | (xd3_posix_func*) &write, NULL))) [ 60s] | ^ [ 60s] In file included from testing/../xdelta3.c:2108, [ 60s] from testing/../xdelta3.c:680, [ 60s] from testing/regtest_c.c:2: [ 60s] testing/../xdelta3-decode.h: In function 'xd3_decode_input': [ 60s] testing/../xdelta3-decode.h:865:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 865 | stream->dec_state = DEC_HDRIND; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:867:5: note: here [ 60s] 867 | case DEC_HDRIND: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:880:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 880 | stream->dec_state = DEC_SECONDID; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:883:5: note: here [ 60s] 883 | case DEC_SECONDID: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:885:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 885 | if ((stream->dec_hdr_ind & VCD_SECONDARY) != 0) [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:903:5: note: here [ 60s] 903 | case DEC_TABLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:909:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 909 | if ((stream->dec_hdr_ind & VCD_CODETABLE) != 0) { [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:916:5: note: here [ 60s] 916 | case DEC_NEAR: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:824:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 824 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:918:7: note: in expansion of macro 'BYTE_CASE' [ 60s] 918 | BYTE_CASE((stream->dec_hdr_ind & VCD_CODETABLE) != 0, [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:920:5: note: here [ 60s] 920 | case DEC_SAME: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:824:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 824 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:922:7: note: in expansion of macro 'BYTE_CASE' [ 60s] 922 | BYTE_CASE((stream->dec_hdr_ind & VCD_CODETABLE) != 0, [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:924:5: note: here [ 60s] 924 | case DEC_TABDAT: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:942:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 942 | stream->dec_state = DEC_APPLEN; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:944:5: note: here [ 60s] 944 | case DEC_APPLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:946:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 946 | SIZE_CASE((stream->dec_hdr_ind & VCD_APPHEADER) != 0, [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:949:5: note: here [ 60s] 949 | case DEC_APPDAT: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:981:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 981 | stream->dec_state = DEC_WININD; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:983:5: note: here [ 60s] 983 | case DEC_WININD: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:1009:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1009 | stream->dec_state = DEC_CPYLEN; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1015:5: note: here [ 60s] 1015 | case DEC_CPYLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:1024:28: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1024 | stream->dec_position = stream->dec_cpylen; [ 60s] | ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1026:5: note: here [ 60s] 1026 | case DEC_CPYOFF: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:1041:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1041 | if ((stream->dec_win_ind & VCD_TARGET) && [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:1049:5: note: here [ 60s] 1049 | case DEC_ENCLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1051:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1051 | SIZE_CASE(1, stream->dec_enclen, DEC_TGTLEN); [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1052:5: note: here [ 60s] 1052 | case DEC_TGTLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:1072:26: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1072 | stream->dec_maxpos = stream->dec_cpylen + stream->dec_tgtlen; [ 60s] | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1074:5: note: here [ 60s] 1074 | case DEC_DELIND: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:1085:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1085 | if ((stream->dec_del_ind != 0) && (stream->sec_type == NULL)) [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:1092:5: note: here [ 60s] 1092 | case DEC_DATALEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1093:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1093 | SIZE_CASE(1, stream->data_sect.size, DEC_INSTLEN); [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1094:5: note: here [ 60s] 1094 | case DEC_INSTLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1095:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1095 | SIZE_CASE(1, stream->inst_sect.size, DEC_ADDRLEN); [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1096:5: note: here [ 60s] 1096 | case DEC_ADDRLEN: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 838 | stream->dec_state = (nstate); \ [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1097:7: note: in expansion of macro 'SIZE_CASE' [ 60s] 1097 | SIZE_CASE(1, stream->addr_sect.size, DEC_CKSUM); [ 60s] | ^~~~~~~~~ [ 60s] testing/../xdelta3-decode.h:1099:5: note: here [ 60s] 1099 | case DEC_CKSUM: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:1148:9: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 1148 | if ((ret = xd3_decode_sections (stream))) { return ret; } [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:1150:5: note: here [ 60s] 1150 | case DEC_EMIT: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h: In function 'xd3_decode_sections': [ 60s] testing/../xdelta3-decode.h:700:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 700 | if ((ret = xd3_decode_section (stream, & stream->data_sect, [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:702:5: note: here [ 60s] 702 | case DEC_INST: [ 60s] | ^~~~ [ 60s] testing/../xdelta3-decode.h:703:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 703 | if ((ret = xd3_decode_section (stream, & stream->inst_sect, [ 60s] | ^ [ 60s] testing/../xdelta3-decode.h:705:5: note: here [ 60s] 705 | case DEC_ADDR: [ 60s] | ^~~~ [ 60s] In file included from testing/../xdelta3.c:267, [ 60s] from testing/regtest_c.c:2: [ 60s] testing/../xdelta3.c: In function 'xd3_encode_input': [ 60s] testing/../xdelta3.h:342:13: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 342 | do { if (! (x)) { DP(RINT "%s:%d: XD3 assertion failed: %s\n", __FILE__, __LINE__, #x); \ [ 60s] | ^ [ 60s] testing/../xdelta3.c:3195:8: note: in expansion of macro 'XD3_ASSERT' [ 60s] 3195 | XD3_ASSERT (stream->match_fwd == 0); [ 60s] | ^~~~~~~~~~ [ 60s] In file included from testing/../xdelta3.c:680, [ 60s] from testing/regtest_c.c:2: [ 60s] testing/../xdelta3.c:3197:6: note: here [ 60s] 3197 | case MATCH_FORWARD: [ 60s] | ^~~~ [ 60s] testing/../xdelta3.c:3121:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 3121 | stream->enc_state = ENC_INPUT; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ [ 60s] testing/../xdelta3.c:3123:5: note: here [ 60s] 3123 | case ENC_INPUT: [ 60s] | ^~~~ [ 60s] testing/../xdelta3.c:3232:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 3232 | stream->enc_state = ENC_INSTR; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ [ 60s] testing/../xdelta3.c:3234:5: note: here [ 60s] 3234 | case ENC_INSTR: [ 60s] | ^~~~ [ 60s] testing/../xdelta3.c:3246:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 3246 | stream->enc_state = ENC_FLUSH; [ 60s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ [ 60s] testing/../xdelta3.c:3248:5: note: here [ 60s] 3248 | case ENC_FLUSH: [ 60s] | ^~~~ [ 60s] testing/../xdelta3.c:3278:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 60s] 3278 | if (stream->avail_out > 0) [ 60s] | ^ [ 60s] testing/../xdelta3.c:3284:5: note: here [ 60s] 3284 | case ENC_POSTOUT: [ 60s] | ^~~~ [ 61s] In file included from testing/../xdelta3.c:740, [ 61s] from testing/regtest_c.c:2: [ 61s] testing/../xdelta3-main.h: In function 'xd3_main_cmdline': [ 61s] testing/../xdelta3-main.h:3725:18: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3725 | option_force2 = 1; [ 61s] | ~~~~~~~~~~~~~~^~~ [ 61s] testing/../xdelta3-main.h:3731:2: note: here [ 61s] 3731 | case 'v': option_verbose += 1; option_quiet = 0; break; [ 61s] | ^~~~ [ 61s] In file included from xdelta3.c:2108, [ 61s] from xdelta3.c:680: [ 61s] xdelta3-decode.h: In function 'xd3_decode_input': [ 61s] xdelta3-decode.h:865:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 865 | stream->dec_state = DEC_HDRIND; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 61s] xdelta3-decode.h:867:5: note: here [ 61s] 867 | case DEC_HDRIND: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:880:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 880 | stream->dec_state = DEC_SECONDID; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 61s] xdelta3-decode.h:883:5: note: here [ 61s] 883 | case DEC_SECONDID: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:885:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 885 | if ((stream->dec_hdr_ind & VCD_SECONDARY) != 0) [ 61s] | ^ [ 61s] xdelta3-decode.h:903:5: note: here [ 61s] 903 | case DEC_TABLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:909:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 909 | if ((stream->dec_hdr_ind & VCD_CODETABLE) != 0) { [ 61s] | ^ [ 61s] xdelta3-decode.h:916:5: note: here [ 61s] 916 | case DEC_NEAR: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:824:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 824 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:918:7: note: in expansion of macro 'BYTE_CASE' [ 61s] 918 | BYTE_CASE((stream->dec_hdr_ind & VCD_CODETABLE) != 0, [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:920:5: note: here [ 61s] 920 | case DEC_SAME: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:824:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 824 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:922:7: note: in expansion of macro 'BYTE_CASE' [ 61s] 922 | BYTE_CASE((stream->dec_hdr_ind & VCD_CODETABLE) != 0, [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:924:5: note: here [ 61s] 924 | case DEC_TABDAT: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:942:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 942 | stream->dec_state = DEC_APPLEN; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 61s] xdelta3-decode.h:944:5: note: here [ 61s] 944 | case DEC_APPLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 838 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:946:7: note: in expansion of macro 'SIZE_CASE' [ 61s] 946 | SIZE_CASE((stream->dec_hdr_ind & VCD_APPHEADER) != 0, [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:949:5: note: here [ 61s] 949 | case DEC_APPDAT: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:981:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 981 | stream->dec_state = DEC_WININD; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 61s] xdelta3-decode.h:983:5: note: here [ 61s] 983 | case DEC_WININD: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:1009:20: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 1009 | stream->dec_state = DEC_CPYLEN; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [ 61s] xdelta3-decode.h:1015:5: note: here [ 61s] 1015 | case DEC_CPYLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:1024:28: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 1024 | stream->dec_position = stream->dec_cpylen; [ 61s] | ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ [ 61s] xdelta3-decode.h:1026:5: note: here [ 61s] 1026 | case DEC_CPYOFF: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:1041:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 1041 | if ((stream->dec_win_ind & VCD_TARGET) && [ 61s] | ^ [ 61s] xdelta3-decode.h:1049:5: note: here [ 61s] 1049 | case DEC_ENCLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 838 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:1051:7: note: in expansion of macro 'SIZE_CASE' [ 61s] 1051 | SIZE_CASE(1, stream->dec_enclen, DEC_TGTLEN); [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:1052:5: note: here [ 61s] 1052 | case DEC_TGTLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:1072:26: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 1072 | stream->dec_maxpos = stream->dec_cpylen + stream->dec_tgtlen; [ 61s] | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] xdelta3-decode.h:1074:5: note: here [ 61s] 1074 | case DEC_DELIND: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:1085:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 1085 | if ((stream->dec_del_ind != 0) && (stream->sec_type == NULL)) [ 61s] | ^ [ 61s] xdelta3-decode.h:1092:5: note: here [ 61s] 1092 | case DEC_DATALEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 838 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:1093:7: note: in expansion of macro 'SIZE_CASE' [ 61s] 1093 | SIZE_CASE(1, stream->data_sect.size, DEC_INSTLEN); [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:1094:5: note: here [ 61s] 1094 | case DEC_INSTLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 838 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:1095:7: note: in expansion of macro 'SIZE_CASE' [ 61s] 1095 | SIZE_CASE(1, stream->inst_sect.size, DEC_ADDRLEN); [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:1096:5: note: here [ 61s] 1096 | case DEC_ADDRLEN: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:838:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 838 | stream->dec_state = (nstate); \ [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~ [ 61s] xdelta3-decode.h:1097:7: note: in expansion of macro 'SIZE_CASE' [ 61s] 1097 | SIZE_CASE(1, stream->addr_sect.size, DEC_CKSUM); [ 61s] | ^~~~~~~~~ [ 61s] xdelta3-decode.h:1099:5: note: here [ 61s] 1099 | case DEC_CKSUM: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:1148:9: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 1148 | if ((ret = xd3_decode_sections (stream))) { return ret; } [ 61s] | ^ [ 61s] xdelta3-decode.h:1150:5: note: here [ 61s] 1150 | case DEC_EMIT: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h: In function 'xd3_decode_sections': [ 61s] xdelta3-decode.h:700:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 700 | if ((ret = xd3_decode_section (stream, & stream->data_sect, [ 61s] | ^ [ 61s] xdelta3-decode.h:702:5: note: here [ 61s] 702 | case DEC_INST: [ 61s] | ^~~~ [ 61s] xdelta3-decode.h:703:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 703 | if ((ret = xd3_decode_section (stream, & stream->inst_sect, [ 61s] | ^ [ 61s] xdelta3-decode.h:705:5: note: here [ 61s] 705 | case DEC_ADDR: [ 61s] | ^~~~ [ 61s] testing/../xdelta3-main.h: In function 'main_input': [ 61s] testing/../xdelta3-main.h:2998:15: warning: statement will never be executed [-Wswitch-unreachable] [ 61s] 2998 | if (1) { case CMD_PRINTHDR: stream_flags |= XD3_JUST_HDR; } [ 61s] | ^ [ 61s] testing/../xdelta3-main.h:2999:15: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 2999 | else if (1) { case CMD_PRINTHDRS: stream_flags |= XD3_SKIP_WINDOW; } [ 61s] | ^ [ 61s] testing/../xdelta3-main.h:3000:21: note: here [ 61s] 3000 | else { case CMD_PRINTDELTA: stream_flags |= XD3_SKIP_EMIT; } [ 61s] | ^~~~ [ 61s] In file included from xdelta3.c:680: [ 61s] xdelta3.c: In function 'xd3_encode_input': [ 61s] xdelta3.c:3182:11: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3182 | if (stream->avail_in > 0) [ 61s] | ^ [ 61s] xdelta3.c:3197:6: note: here [ 61s] 3197 | case MATCH_FORWARD: [ 61s] | ^~~~ [ 61s] xdelta3.c:3121:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3121 | stream->enc_state = ENC_INPUT; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ [ 61s] xdelta3.c:3123:5: note: here [ 61s] 3123 | case ENC_INPUT: [ 61s] | ^~~~ [ 61s] xdelta3.c:3232:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3232 | stream->enc_state = ENC_INSTR; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ [ 61s] xdelta3.c:3234:5: note: here [ 61s] 3234 | case ENC_INSTR: [ 61s] | ^~~~ [ 61s] xdelta3.c:3246:25: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3246 | stream->enc_state = ENC_FLUSH; [ 61s] | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ [ 61s] xdelta3.c:3248:5: note: here [ 61s] 3248 | case ENC_FLUSH: [ 61s] | ^~~~ [ 61s] xdelta3.c:3278:10: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3278 | if (stream->avail_out > 0) [ 61s] | ^ [ 61s] xdelta3.c:3284:5: note: here [ 61s] 3284 | case ENC_POSTOUT: [ 61s] | ^~~~ [ 61s] In file included from xdelta3.c:740: [ 61s] xdelta3-main.h: In function 'main': [ 61s] xdelta3-main.h:3725:18: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 3725 | option_force2 = 1; [ 61s] | ~~~~~~~~~~~~~~^~~ [ 61s] xdelta3-main.h:3731:2: note: here [ 61s] 3731 | case 'v': option_verbose += 1; option_quiet = 0; break; [ 61s] | ^~~~ [ 61s] xdelta3-main.h: In function 'main_input': [ 61s] xdelta3-main.h:2998:15: warning: statement will never be executed [-Wswitch-unreachable] [ 61s] 2998 | if (1) { case CMD_PRINTHDR: stream_flags |= XD3_JUST_HDR; } [ 61s] | ^ [ 61s] xdelta3-main.h:2999:15: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 61s] 2999 | else if (1) { case CMD_PRINTHDRS: stream_flags |= XD3_SKIP_WINDOW; } [ 61s] | ^ [ 61s] xdelta3-main.h:3000:21: note: here [ 61s] 3000 | else { case CMD_PRINTDELTA: stream_flags |= XD3_SKIP_EMIT; } [ 61s] | ^~~~ [ 61s] In file included from xdelta3.c:268: [ 61s] xdelta3-main.h: In function 'main_format_rate': [ 61s] xdelta3-main.h:627:24: warning: '/s' directive output may be truncated writing 2 bytes into a region of size between 1 and 48 [-Wformat-truncation=] [ 61s] 627 | short_sprintf (*buf, "%s/s", lbuf.buf); [ 61s] | ^~~~~~ [ 61s] xdelta3-internal.h:137:43: note: in definition of macro 'short_sprintf' [ 61s] 137 | snprintf_func((sb).buf,sizeof((sb).buf),fmt,__VA_ARGS__) [ 61s] | ^~~ [ 61s] In file included from xdelta3.c:740: [ 61s] xdelta3-main.h:627:27: note: format string is defined here [ 61s] 627 | short_sprintf (*buf, "%s/s", lbuf.buf); [ 61s] | ^~ [ 61s] In file included from /usr/include/stdio.h:867, [ 61s] from xdelta3.h:38, [ 61s] from xdelta3.c:267: [ 61s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 3 and 50 bytes into a destination of size 48 [ 61s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 61s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 61s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] In file included from testing/../xdelta3.c:268, [ 61s] from testing/regtest_c.c:2: [ 61s] testing/../xdelta3-main.h: In function 'main_format_rate': [ 61s] testing/../xdelta3-main.h:627:24: warning: '/s' directive output may be truncated writing 2 bytes into a region of size between 1 and 48 [-Wformat-truncation=] [ 61s] 627 | short_sprintf (*buf, "%s/s", lbuf.buf); [ 61s] | ^~~~~~ [ 61s] testing/../xdelta3-internal.h:137:43: note: in definition of macro 'short_sprintf' [ 61s] 137 | snprintf_func((sb).buf,sizeof((sb).buf),fmt,__VA_ARGS__) [ 61s] | ^~~ [ 61s] In file included from testing/../xdelta3.c:740, [ 61s] from testing/regtest_c.c:2: [ 61s] testing/../xdelta3-main.h:627:27: note: format string is defined here [ 61s] 627 | short_sprintf (*buf, "%s/s", lbuf.buf); [ 61s] | ^~ [ 61s] In file included from /usr/include/stdio.h:867, [ 61s] from testing/../xdelta3.h:38, [ 61s] from testing/../xdelta3.c:267, [ 61s] from testing/regtest_c.c:2: [ 61s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 3 and 50 bytes into a destination of size 48 [ 61s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 61s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 61s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] In file included from xdelta3.c:268: [ 61s] xdelta3-main.h: In function 'main_format_rate': [ 61s] xdelta3-main.h:627:24: warning: '/s' directive output may be truncated writing 2 bytes into a region of size between 1 and 48 [-Wformat-truncation=] [ 61s] 627 | short_sprintf (*buf, "%s/s", lbuf.buf); [ 61s] | ^~~~~~ [ 61s] xdelta3-internal.h:137:43: note: in definition of macro 'short_sprintf' [ 61s] 137 | snprintf_func((sb).buf,sizeof((sb).buf),fmt,__VA_ARGS__) [ 61s] | ^~~ [ 61s] In file included from xdelta3.c:740: [ 61s] xdelta3-main.h:627:27: note: format string is defined here [ 61s] 627 | short_sprintf (*buf, "%s/s", lbuf.buf); [ 61s] | ^~ [ 61s] In file included from /usr/include/stdio.h:867, [ 61s] from xdelta3.h:38, [ 61s] from xdelta3.c:267: [ 61s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 3 and 50 bytes into a destination of size 48 [ 61s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 61s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 61s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 61s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 62s] mv -f .deps/xdelta3decode-xdelta3.Tpo .deps/xdelta3decode-xdelta3.Po [ 62s] /bin/sh ./libtool --tag=CC --mode=link aarch64-tizen-linux-gnu-gcc -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=0 -DSECONDARY_DJW=0 -DSECONDARY_FGK=0 -DSECONDARY_LZMA=0 -DXD3_MAIN=1 -DXD3_ENCODER=0 -DXD3_STDIO=1 -DEXTERNAL_COMPRESSION=0 -DVCDIFF_TOOLS=0 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -pie -o xdelta3decode xdelta3decode-xdelta3.o [ 62s] libtool: link: aarch64-tizen-linux-gnu-gcc -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=0 -DSECONDARY_DJW=0 -DSECONDARY_FGK=0 -DSECONDARY_LZMA=0 -DXD3_MAIN=1 -DXD3_ENCODER=0 -DXD3_STDIO=1 -DEXTERNAL_COMPRESSION=0 -DVCDIFF_TOOLS=0 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z -Wl,relro -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -pie -o xdelta3decode xdelta3decode-xdelta3.o [ 64s] In file included from xdelta3.c:744: [ 64s] xdelta3-test.h: In function 'test_appheader.isra.0': [ 64s] xdelta3-test.h:2455:17: warning: '%s' directive output may be truncated writing up to 16383 bytes into a region of size 16374 [-Wformat-truncation=] [ 64s] 2455 | "%s -q -f -A=%s -e -s %s %s %s", program_name, bogus, [ 64s] | ^~ ~~~~~ [ 64s] In file included from /usr/include/stdio.h:867, [ 64s] from xdelta3.h:38, [ 64s] from xdelta3.c:267: [ 64s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 20 or more bytes (assuming 19472) into a destination of size 16384 [ 64s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 64s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 64s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 64s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 64s] In file included from xdelta3.c:744: [ 64s] xdelta3-test.h: In function 'test_compressed_pipe.isra.0': [ 64s] xdelta3-test.h:2118:63: warning: '%s' directive output may be truncated writing up to 16383 bytes into a region of size between 15349 and 16372 [-Wformat-truncation=] [ 64s] 2118 | snprintf_func (buf, TESTBUFSIZE, "%s %s < %s | %s %s | %s %s%s > %s", [ 64s] | ^~ [ 64s] ...... [ 64s] 2123 | decomp_buf, [ 64s] | ~~~~~~~~~~ [ 64s] In file included from /usr/include/stdio.h:867, [ 64s] from xdelta3.h:38, [ 64s] from xdelta3.c:267: [ 64s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 16 or more bytes (assuming 18445) into a destination of size 16384 [ 64s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 64s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 64s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 64s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 65s] In file included from testing/../xdelta3.c:744, [ 65s] from testing/regtest_c.c:2: [ 65s] testing/../xdelta3-test.h: In function 'test_appheader.isra.0': [ 65s] testing/../xdelta3-test.h:2455:17: warning: '%s' directive output may be truncated writing up to 16383 bytes into a region of size 16374 [-Wformat-truncation=] [ 65s] 2455 | "%s -q -f -A=%s -e -s %s %s %s", program_name, bogus, [ 65s] | ^~ ~~~~~ [ 65s] In file included from /usr/include/stdio.h:867, [ 65s] from testing/../xdelta3.h:38, [ 65s] from testing/../xdelta3.c:267, [ 65s] from testing/regtest_c.c:2: [ 65s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 20 or more bytes (assuming 19472) into a destination of size 16384 [ 65s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 65s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 65s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 65s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 65s] In file included from testing/../xdelta3.c:744, [ 65s] from testing/regtest_c.c:2: [ 65s] testing/../xdelta3-test.h: In function 'test_compressed_pipe.isra.0': [ 65s] testing/../xdelta3-test.h:2118:63: warning: '%s' directive output may be truncated writing up to 16383 bytes into a region of size between 15349 and 16372 [-Wformat-truncation=] [ 65s] 2118 | snprintf_func (buf, TESTBUFSIZE, "%s %s < %s | %s %s | %s %s%s > %s", [ 65s] | ^~ [ 65s] ...... [ 65s] 2123 | decomp_buf, [ 65s] | ~~~~~~~~~~ [ 65s] In file included from /usr/include/stdio.h:867, [ 65s] from testing/../xdelta3.h:38, [ 65s] from testing/../xdelta3.c:267, [ 65s] from testing/regtest_c.c:2: [ 65s] /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 16 or more bytes (assuming 18445) into a destination of size 16384 [ 65s] 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, [ 65s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 65s] 68 | __bos (__s), __fmt, __va_arg_pack ()); [ 65s] | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 65s] mv -f .deps/xdelta3-xdelta3.Tpo .deps/xdelta3-xdelta3.Po [ 65s] /bin/sh ./libtool --tag=CC --mode=link aarch64-tizen-linux-gnu-gcc -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DXD3_DEBUG=0 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -pie -o xdelta3 xdelta3-xdelta3.o -lm [ 65s] libtool: link: aarch64-tizen-linux-gnu-gcc -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -pedantic -std=c99 -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DXD3_DEBUG=0 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z -Wl,relro -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -pie -o xdelta3 xdelta3-xdelta3.o -lm [ 66s] mv -f testing/.deps/xdelta3regtest-regtest_c.Tpo testing/.deps/xdelta3regtest-regtest_c.Po [ 74s] mv -f testing/.deps/xdelta3regtest-regtest.Tpo testing/.deps/xdelta3regtest-regtest.Po [ 74s] /bin/sh ./libtool --tag=CXX --mode=link aarch64-tizen-linux-gnu-g++ -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DNOT_MAIN=1 -DXD3_DEBUG=1 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -pie -o xdelta3regtest testing/xdelta3regtest-regtest.o testing/xdelta3regtest-regtest_c.o -lm [ 74s] libtool: link: aarch64-tizen-linux-gnu-g++ -Wall -Wshadow -fno-builtin -Wextra -Wsign-compare -Wextra -Wno-unused-parameter -Wno-unused-function -DREGRESSION_TEST=1 -DSECONDARY_DJW=1 -DSECONDARY_FGK=1 -DXD3_MAIN=1 -DNOT_MAIN=1 -DXD3_DEBUG=1 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z -Wl,relro -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -pie -o xdelta3regtest testing/xdelta3regtest-regtest.o testing/xdelta3regtest-regtest_c.o -lm [ 74s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xdelta3-3.0.11' [ 74s] + exit 0 [ 74s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.6g1SjH [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd xdelta3-3.0.11 [ 74s] + LANG=C [ 74s] + export LANG [ 74s] + unset DISPLAY [ 74s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 74s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 74s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 74s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 install [ 74s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xdelta3-3.0.11' [ 74s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/bin' [ 74s] /bin/sh ./libtool --mode=install /bin/install -c xdelta3 '/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/bin' [ 74s] libtool: install: /bin/install -c xdelta3 /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/bin/xdelta3 [ 74s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/man/man1' [ 74s] /bin/install -c -m 644 xdelta3.1 '/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/man/man1' [ 74s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xdelta3-3.0.11' [ 74s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/info/dir [ 74s] + find /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 -regex '.*\.la$' [ 74s] + xargs rm -f -- [ 74s] + find /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 -regex '.*\.a$' [ 74s] + xargs rm -f -- [ 74s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 3.0.11-3.16 --unique-debug-src-base xdelta3-3.0.11-3.16.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/xdelta3-3.0.11 [ 75s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/bin/xdelta3 [ 75s] 1026 blocks [ 75s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xdelta3-3.0.11/xdelta3-debuginfo.manifest [ 75s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xdelta3-3.0.11/xdelta3-debugsource.manifest [ 75s] + /usr/lib/rpm/check-buildroot [ 75s] + /usr/lib/rpm//brp-compress [ 75s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 75s] + /usr/lib/rpm/brp-python-hardlink [ 75s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 75s] Processing files: xdelta3-3.0.11-3.16.aarch64 [ 75s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 75s] cXVlc3Q+Cgk8YXNzaWduPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmluL3hk [ 75s] ZWx0YTMiIGxhYmVsPSJfIiBleGVjX2xhYmVsPSJub25lIiAvPgoJPC9hc3NpZ24+ [ 75s] CjwvbWFuaWZlc3Q+Cg== [ 75s] [ 75s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.OttWeJ [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd xdelta3-3.0.11 [ 75s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/doc/packages/xdelta3 [ 75s] + export LC_ALL=C [ 75s] + LC_ALL=C [ 75s] + export DOCDIR [ 75s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/doc/packages/xdelta3 [ 75s] + cp -pr README.md /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/doc/packages/xdelta3 [ 75s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/doc/packages/xdelta3 [ 75s] + exit 0 [ 75s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.g6LhBG [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd xdelta3-3.0.11 [ 75s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/licenses/xdelta3 [ 75s] + export LC_ALL=C [ 75s] + LC_ALL=C [ 75s] + export LICENSEDIR [ 75s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/licenses/xdelta3 [ 75s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64/usr/share/licenses/xdelta3 [ 75s] + exit 0 [ 75s] Provides: xdelta3 = 3.0.11-3.16 xdelta3(aarch-64) = 3.0.11-3.16 [ 75s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 75s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.29)(64bit) [ 75s] Processing files: xdelta3-debugsource-3.0.11-3.16.aarch64 [ 75s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 75s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 75s] [ 75s] Provides: xdelta3-debugsource = 3.0.11-3.16 xdelta3-debugsource(aarch-64) = 3.0.11-3.16 [ 75s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 75s] Processing files: xdelta3-debuginfo-3.0.11-3.16.aarch64 [ 75s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 75s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 75s] [ 75s] Provides: xdelta3-debuginfo = 3.0.11-3.16 xdelta3-debuginfo(aarch-64) = 3.0.11-3.16 [ 75s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 75s] Recommends: xdelta3-debugsource(aarch-64) = 3.0.11-3.16 [ 75s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 75s] Wrote: /home/abuild/rpmbuild/SRPMS/xdelta3-3.0.11-3.16.src.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xdelta3-3.0.11-3.16.aarch64.rpm [ 75s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xdelta3-debugsource-3.0.11-3.16.aarch64.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xdelta3-debuginfo-3.0.11-3.16.aarch64.rpm [ 76s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5SORCF [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd xdelta3-3.0.11 [ 76s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 76s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xdelta3-3.0.11-3.16.aarch64 [ 76s] + exit 0 [ 76s] ... checking for files with abuild user/group [ 76s] ... creating baselibs [ 76s] ... comparing built packages with the former built [ 76s] /usr/lib/build/pkg-diff.sh [ 76s] compare /.build.oldpackages/xdelta3-3.0.11-3.15.src.rpm /home/abuild/rpmbuild/SRPMS/xdelta3-3.0.11-3.16.src.rpm [ 76s] This is not a prerelease project. Compare the project name. [ 76s] comparing rpmtags [ 76s] comparing RELEASE [ 76s] comparing PROVIDES [ 76s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] RPM meta information is identical [ 77s] compare /.build.oldpackages/xdelta3-3.0.11-3.15.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xdelta3-3.0.11-3.16.aarch64.rpm [ 77s] Comparing xdelta3-3.0.11-3.15.aarch64.rpm to xdelta3-3.0.11-3.16.aarch64.rpm [ 77s] This is not a prerelease project. Compare the project name. [ 77s] comparing rpmtags [ 77s] comparing RELEASE [ 77s] comparing PROVIDES [ 77s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] creating rename script [ 77s] RPM file checksum differs. [ 77s] Extracting packages [ 77s] /usr/bin/xdelta3: only difference was in build-id or gnu_debuglink, GOOD. [ 77s] Package content is identical [ 77s] compare /.build.oldpackages/xdelta3-debuginfo-3.0.11-3.15.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xdelta3-debuginfo-3.0.11-3.16.aarch64.rpm [ 77s] skipping -debuginfo package [ 77s] compare /.build.oldpackages/xdelta3-debugsource-3.0.11-3.15.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xdelta3-debugsource-3.0.11-3.16.aarch64.rpm [ 78s] Comparing xdelta3-debugsource-3.0.11-3.15.aarch64.rpm to xdelta3-debugsource-3.0.11-3.16.aarch64.rpm [ 78s] This is not a prerelease project. Compare the project name. [ 78s] comparing rpmtags [ 78s] comparing RELEASE [ 78s] comparing PROVIDES [ 78s] comparing scripts [ 78s] comparing filelist [ 78s] comparing file checksum [ 78s] creating rename script [ 78s] RPM meta information is identical [ 78s] compare validated built as identical ! [ 78s] [ 78s] obsnw12 finished "build xdelta3.spec" at Wed Mar 3 11:45:25 UTC 2021. [ 78s] Retried build at Sun Mar 7 11:46:54 2021 returned same result, skipped Retried build at Mon Mar 8 05:34:09 2021 returned same result, skipped Retried build at Wed Mar 24 15:29:55 2021 returned same result, skipped Retried build at Wed Mar 31 10:37:28 2021 returned same result, skipped Retried build at Fri Apr 2 04:12:17 2021 returned same result, skipped Retried build at Mon May 3 17:12:59 2021 returned same result, skipped