[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_6 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw05 started "build _service:gbs:pass-hal-rpi.spec" at Sun Mar 28 23:43:14 UTC 2021. [ 0s] [ 0s] Building pass-hal-rpi for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'f79a07f8a01f0c179bb34988374aa378' [ 0s] [ 0s] processing recipe /var/cache/build/root_6/.build-srcdir/_service:gbs:pass-hal-rpi.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_6/.build-srcdir/_service:gbs:pass-hal-rpi.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_6/.build.rpmlist /var/cache/build/root_6/.build-srcdir/_service:gbs:pass-hal-rpi.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/6/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libzstd1... [ 2s] [8/41] preinstalling bash... [ 2s] [9/41] preinstalling diffutils... [ 2s] [10/41] preinstalling grep... [ 2s] [11/41] preinstalling libattr... [ 2s] [12/41] preinstalling libblkid... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 2s] [16/41] preinstalling liblua... [ 2s] [17/41] preinstalling liblzma... [ 2s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libsqlite... [ 2s] [22/41] preinstalling libuuid... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/117] installing dlog-config-persistent-logs-6.5.1-110.1 [ 9s] [2/117] installing libmagic-data-5.39-4.104 [ 9s] [3/117] installing setup-0.9-4.29 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [4/117] installing filesystem-3.1-3.3 [ 9s] [5/117] installing glibc-2.30-6.22 [ 9s] [6/117] installing libatomic-9.2.0-9.7 [ 10s] [7/117] installing libgcc-9.2.0-9.7 [ 11s] [8/117] installing libzstd1-1.4.5-1.78 [ 11s] [9/117] installing bash-3.2.57-4.4 [ 11s] [10/117] installing capi-base-common-0.4.60-44.3 [ 12s] [11/117] installing cpio-2.8-5.2 [ 12s] [12/117] installing diffutils-3.3-4.2 [ 12s] [13/117] installing findutils-4.3.8-4.8 [ 12s] [14/117] installing gdbm-1.8.3-3.200 [ 12s] [15/117] installing hostname-3.23-3.2 [ 12s] [16/117] installing libattr-2.4.48-4.123 [ 12s] [17/117] installing libblkid-2.36-7.21 [ 13s] [18/117] installing libbz2-1.0.8-4.138 [ 13s] [19/117] installing libcap-2.24-3.184 [ 13s] [20/117] installing libexpat-2.2.9-3.81 [ 14s] [21/117] installing libext2fs-1.46.0-4.7 [ 14s] [22/117] installing libffi-3.3-4.126 [ 14s] [23/117] installing libfreebl3-3.34.1-3.144 [ 15s] [24/117] installing libgfortran-9.2.0-9.7 [ 15s] [25/117] installing libgomp-9.2.0-9.7 [ 15s] [26/117] installing libitm-9.2.0-9.7 [ 15s] [27/117] installing libjson-0.15-12.4 [ 16s] [28/117] installing libltdl-2.4.2-3.148 [ 16s] [29/117] installing liblua-5.1.5-3.133 [ 16s] [30/117] installing liblzma-5.2.5-4.63 [ 17s] [31/117] installing libopenssl11-1.1.1i-4.26 [ 17s] [32/117] installing libpcre-8.44-4.19 [ 18s] [33/117] installing libpopt-1.16-3.182 [ 18s] [34/117] installing libsmack-1.3.1-3.178 [ 18s] [35/117] installing libsmartcols-2.36-7.21 [ 18s] [36/117] installing libsqlite-3.33.0-4.107 [ 19s] [37/117] installing libstdc++-9.2.0-9.7 [ 19s] [38/117] installing libuuid-2.36-7.21 [ 19s] [39/117] installing m4-1.4.17-3.2 [ 19s] [40/117] installing net-tools-2.0_20121208git-4.3 [ 19s] [41/117] installing nspr-4.12-3.183 [ 20s] [42/117] installing patch-2.7-6.7 [ 20s] [43/117] installing pkg-config-0.28-3.175 [ 20s] [44/117] installing sed-4.1c-4.1 [ 20s] [45/117] installing update-alternatives-1.20.5-3.3 [ 20s] [46/117] installing which-2.17-4.3 [ 20s] [47/117] installing zlib-1.2.11-3.188 [ 20s] [48/117] installing build-compare-2015.04.28-3.70 [ 20s] [49/117] installing libstdc++-devel-9.2.0-9.7 [ 21s] [50/117] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 23s] [51/117] installing terminfo-base-full-6.2-5.97 [ 23s] [52/117] installing cpp-9.2.0-9.7 [ 24s] [53/117] installing gcc-c++-9.2.0-9.7 [ 25s] [54/117] installing binutils-2.33.1-8.4 [ 25s] [55/117] installing coreutils-6.9-5.4 [ 25s] [56/117] installing gawk-3.1.5-4.3 [ 25s] [57/117] installing grep-2.5.2-3.3 [ 25s] [58/117] installing libacl-2.2.53-4.122 [ 26s] [59/117] installing libcc1-9.2.0-9.7 [ 26s] [60/117] installing libelf-0.178-3.99 [ 26s] [61/117] installing libglib-2.62.3-29.80 [ 26s] [62/117] installing libmount-2.36-7.21 [ 27s] [63/117] installing libubsan-9.2.0-9.7 [ 27s] [64/117] installing make-4.0-2.50 [ 27s] [65/117] installing nss-certs-3.34.1-3.144 [ 27s] [66/117] installing smack-1.3.1-3.178 [ 27s] [67/117] installing bzip2-1.0.8-4.138 [ 28s] [68/117] installing dlog-common-6.5.1-110.1 [ 28s] [69/117] installing libfdisk-2.36-7.21 [ 28s] [70/117] installing libmagic-5.39-4.104 [ 29s] [71/117] installing libxml2-2.9.10-4.17 [ 29s] [72/117] installing perl-5.32.0-4.54 [ 31s] [73/117] installing xz-5.2.5-4.63 [ 32s] [74/117] installing build-mkbaselibs-20120927-3.3 [ 32s] [75/117] installing linux-glibc-devel-3.10-4.27 [ 32s] [76/117] installing autoconf-2.69-3.113 [ 32s] [77/117] installing dlog-logger-6.5.1-110.1 [ 32s] [78/117] installing file-5.39-4.104 [ 33s] [79/117] installing glibc-locale-2.30-6.22 [ 34s] [80/117] installing libgmodule-2.62.3-29.80 [ 36s] [81/117] installing tar-1.17-3.1 [ 36s] [82/117] installing tizen-platform-config-5.0-15.4 [ 37s] [83/117] installing gzip-1.3.12-3.183 [ 37s] [84/117] installing libgobject-2.62.3-29.80 [ 37s] [85/117] installing libncurses6-6.2-5.97 [ 38s] [86/117] installing pam-1.1.6-3.3 [ 38s] [87/117] installing tzdata-2020a-3.3 [ 38s] [88/117] installing libdw-0.178-3.99 [ 39s] [89/117] installing libarchive-3.5.1-2.23 [ 39s] [90/117] installing shared-mime-info-1.7-5.19 [ 45s] [91/117] installing gcc-9.2.0-9.7 [ 46s] [92/117] installing libncurses-6.2-5.97 [ 46s] [93/117] installing glibc-devel-2.30-6.22 [ 46s] [94/117] installing qemu-accel-x86_64-armv7l-0.4-6.2 [ 55s] [95/117] installing automake-1.15.1-3.133 [ 56s] [96/117] installing less-466-3.3 [ 56s] [97/117] installing libreadline-5.2-3.51 [ 56s] [98/117] installing libtzplatform-config-5.0-15.4 [ 56s] [99/117] installing procps-ng-3.3.16-3.3 [ 57s] [100/117] installing libasm-0.178-3.99 [ 57s] [101/117] installing build-20120927-3.3 [ 57s] [102/117] installing libdlog-6.5.1-110.1 [ 57s] [103/117] installing cmake-3.16.4-4.2 [ 58s] [104/117] installing libtool-2.4.2-3.148 [ 58s] [105/117] installing elfutils-0.178-3.99 [ 58s] [106/117] installing util-linux-2.36-7.21 [ 58s] [107/117] installing util-linux-su-2.36-7.21 [ 58s] [108/117] installing nss-3.34.1-3.144 [ 59s] [109/117] installing libgio-2.62.3-29.80 [ 59s] [110/117] installing gio-branding-upstream-2.62.3-29.80 [ 59s] [111/117] installing libsoftokn3-3.34.1-3.144 [ 60s] [112/117] installing hal-api-common-0.0.1-18.1 [ 60s] [113/117] installing rpm-4.14.1.1-7.10 [ 61s] [114/117] installing hal-api-common-devel-0.0.1-18.1 [ 61s] [115/117] installing hal-api-power-0.0.1-3.1 [ 61s] [116/117] installing rpm-build-4.14.1.1-7.10 [ 61s] [117/117] installing hal-api-power-devel-0.0.1-3.1 [ 61s] removing nis flags from /var/cache/build/root_6/etc/nsswitch.conf... [ 61s] now finalizing build dir... [ 62s] Running build time source services... [ 62s] build target is armv7l-tizen-linux [ 62s] ----------------------------------------------------------------- [ 62s] I have the following modifications for pass-hal-rpi.spec: [ 62s] 8c8 [ 62s] < Release: %{release} [ 62s] --- [ 62s] > Release: 12.2 [ 62s] ----------------------------------------------------------------- [ 62s] ----- building pass-hal-rpi.spec (user abuild) [ 62s] ----------------------------------------------------------------- [ 62s] ----------------------------------------------------------------- [ 62s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/f79a07f8a01f0c179bb34988374aa378-pass-hal-rpi' -ba /home/abuild/rpmbuild/SOURCES/pass-hal-rpi.spec [ 62s] Building target platforms: armv7l-tizen-linux [ 62s] Building for target armv7l-tizen-linux [ 62s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Z3sFLJ [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + rm -rf pass-hal-rpi-1.2.0 [ 62s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pass-hal-rpi-1.2.0.tar.gz [ 62s] + /bin/tar -xof - [ 62s] + STATUS=0 [ 62s] + '[' 0 -ne 0 ']' [ 62s] + cd pass-hal-rpi-1.2.0 [ 62s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 62s] + cp /home/abuild/rpmbuild/SOURCES/pass-hal-rpi.manifest . [ 62s] + exit 0 [ 62s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.bEum3L [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd pass-hal-rpi-1.2.0 [ 62s] ++ uname -m [ 62s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 62s] + export CFLAGS [ 62s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 62s] + export CXXFLAGS [ 62s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 62s] + export FFLAGS [ 62s] + LDFLAGS= [ 62s] + export LDFLAGS [ 62s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 62s] + export CFLAGS [ 62s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 62s] + export CXXFLAGS [ 62s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 62s] + export FFLAGS [ 62s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_HAL_LIBDIR_PREFIX=/hal/lib -DCMAKE_HAL_LICENSEDIR_PREFIX=/hal/share/licenses [ 62s] -- The C compiler identification is GNU 9.2.0 [ 62s] -- Check for working C compiler: /bin/cc [ 62s] -- Check for working C compiler: /bin/cc -- works [ 62s] -- Detecting C compiler ABI info [ 62s] -- Detecting C compiler ABI info - done [ 62s] -- Detecting C compile features [ 62s] -- Detecting C compile features - done [ 62s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 62s] -- Checking for modules 'hal-api-common;hal-api-power' [ 63s] -- Found hal-api-common, version 0.1.0 [ 63s] -- Found hal-api-power, version 0.1.0 [ 63s] -- Configuring done [ 63s] -- Generating done [ 63s] CMake Warning: [ 63s] Manually-specified variables were not used by the project: [ 63s] [ 63s] CMAKE_INSTALL_LIBDIR [ 63s] INCLUDE_INSTALL_DIR [ 63s] LIB_INSTALL_DIR [ 63s] SHARE_INSTALL_PREFIX [ 63s] SYSCONF_INSTALL_DIR [ 63s] [ 63s] [ 63s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 [ 63s] + make -j4 [ 63s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 -B/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 --check-build-system CMakeFiles/Makefile.cmake 0 [ 63s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles/progress.marks [ 63s] make -f CMakeFiles/Makefile2 all [ 63s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/depend [ 63s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] cd /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles/hal-backend-power.dir/DependInfo.cmake --color= [ 63s] Scanning dependencies of target hal-backend-power [ 63s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/build [ 63s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] [ 33%] Building C object CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o [ 63s] [ 66%] Building C object CMakeFiles/hal-backend-power.dir/src/sysfs.c.o [ 63s] /bin/cc -Dhal_backend_power_EXPORTS -I/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/include -I/usr/include/hal -fPIC -o CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o -c /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/src/hal-backend-power.c [ 63s] /bin/cc -Dhal_backend_power_EXPORTS -I/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/include -I/usr/include/hal -fPIC -o CMakeFiles/hal-backend-power.dir/src/sysfs.c.o -c /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/src/sysfs.c [ 63s] [100%] Linking C shared library libhal-backend-power.so [ 63s] /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-power.dir/link.txt --verbose=1 [ 63s] /bin/cc -fPIC -I/usr/include/hal -shared -Wl,-soname,libhal-backend-power.so -o libhal-backend-power.so CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o CMakeFiles/hal-backend-power.dir/src/sysfs.c.o -L/usr/lib/hal -lhal-api-power -lhal-api-common -ldl [ 63s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] [100%] Built target hal-backend-power [ 63s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles 0 [ 63s] + exit 0 [ 63s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.gxPuYM [ 63s] + umask 022 [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + cd pass-hal-rpi-1.2.0 [ 63s] + LANG=C [ 63s] + export LANG [ 63s] + unset DISPLAY [ 63s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm [ 63s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm [ 63s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm [ 63s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm install [ 63s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 -B/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 --check-build-system CMakeFiles/Makefile.cmake 0 [ 63s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles/progress.marks [ 63s] /bin/make -f CMakeFiles/Makefile2 all [ 63s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] /bin/make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/depend [ 63s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 63s] cd /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles/hal-backend-power.dir/DependInfo.cmake --color= [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 64s] /bin/make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/build [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 64s] make[2]: Nothing to be done for 'CMakeFiles/hal-backend-power.dir/build'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 64s] [100%] Built target hal-backend-power [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 64s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/CMakeFiles 0 [ 64s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 64s] make[1]: Nothing to be done for 'preinstall'. [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0' [ 64s] Install the project... [ 64s] /usr/bin/cmake -P cmake_install.cmake [ 64s] -- Install configuration: "" [ 64s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/etc/pass/pass.conf [ 64s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/etc/pass/pass-cpu0.conf [ 64s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/etc/pass/pass-memory.conf [ 64s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/lib/tmpfiles.d/pass-hal.conf [ 64s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/share/licenses/pass-hal-rpi/LICENSE [ 64s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/lib/libhal-backend-power.so [ 64s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/usr/share/info/dir [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm -regex '.*\.la$' [ 64s] + xargs rm -f -- [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm -regex '.*\.a$' [ 64s] + xargs rm -f -- [ 64s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 1.2.0-12.2 --unique-debug-src-base pass-hal-rpi-1.2.0-12.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0 [ 64s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm/hal/lib/libhal-backend-power.so [ 64s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/pass-hal-rpi-debuginfo.manifest [ 64s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/pass-hal-rpi-debugsource.manifest [ 64s] + /usr/lib/rpm/check-buildroot [ 64s] + /usr/lib/rpm//brp-compress [ 64s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 64s] + /usr/lib/rpm/brp-python-hardlink [ 64s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm [ 64s] Processing files: pass-hal-rpi-1.2.0-12.2.armv7l [ 64s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 64s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 64s] [ 64s] Provides: config(pass-hal-rpi) = 1.2.0-12.2 libhal-backend-power.so pass-hal-rpi = 1.2.0-12.2 pass-hal-rpi(armv7l-32) = 1.2.0-12.2 [ 64s] Requires(interp): /bin/sh /bin/sh [ 64s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 64s] Requires(post): /bin/sh /bin/systemctl /sbin/ldconfig [ 64s] Requires(postun): /bin/sh /bin/systemctl /sbin/ldconfig [ 64s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libhal-api-common.so.0 libhal-api-power.so.0 [ 64s] Processing files: pass-hal-rpi-debugsource-1.2.0-12.2.armv7l [ 64s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/pass-hal-rpi-1.2.0/debugsourcefiles.list [ 64s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 64s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 64s] [ 64s] Processing files: pass-hal-rpi-debuginfo-1.2.0-12.2.armv7l [ 64s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 64s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 64s] [ 64s] Provides: pass-hal-rpi-debuginfo = 1.2.0-12.2 pass-hal-rpi-debuginfo(armv7l-32) = 1.2.0-12.2 [ 64s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 64s] Recommends: pass-hal-rpi-debugsource(armv7l-32) = 1.2.0-12.2 [ 64s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm [ 64s] Wrote: /home/abuild/rpmbuild/SRPMS/pass-hal-rpi-1.2.0-12.2.src.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pass-hal-rpi-1.2.0-12.2.armv7l.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pass-hal-rpi-debugsource-1.2.0-12.2.armv7l.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pass-hal-rpi-debuginfo-1.2.0-12.2.armv7l.rpm [ 64s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DAqE5J [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd pass-hal-rpi-1.2.0 [ 64s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pass-hal-rpi-1.2.0-12.2.arm [ 64s] + exit 0 [ 64s] ... checking for files with abuild user/group [ 64s] ... creating baselibs [ 65s] ... comparing built packages with the former built [ 65s] /usr/lib/build/pkg-diff.sh [ 65s] compare /.build.oldpackages/pass-hal-rpi-1.2.0-12.1.src.rpm /home/abuild/rpmbuild/SRPMS/pass-hal-rpi-1.2.0-12.2.src.rpm [ 65s] This is not a prerelease project. Compare the project name. [ 65s] comparing rpmtags [ 65s] comparing RELEASE [ 65s] comparing PROVIDES [ 65s] comparing scripts [ 65s] comparing filelist [ 65s] comparing file checksum [ 65s] RPM meta information is identical [ 65s] compare /.build.oldpackages/pass-hal-rpi-1.2.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pass-hal-rpi-1.2.0-12.2.armv7l.rpm [ 66s] Comparing pass-hal-rpi-1.2.0-12.1.armv7l.rpm to pass-hal-rpi-1.2.0-12.2.armv7l.rpm [ 66s] This is not a prerelease project. Compare the project name. [ 66s] comparing rpmtags [ 66s] comparing RELEASE [ 66s] comparing PROVIDES [ 66s] comparing scripts [ 66s] comparing filelist [ 66s] comparing file checksum [ 66s] creating rename script [ 66s] RPM file checksum differs. [ 66s] Extracting packages [ 66s] /hal/lib/libhal-backend-power.so differs in ELF section .dynstr [ 66s] --- /tmp/tmp.MBdpl64158/tmp.BbPkJ64326 2021-03-28 23:44:20.601755979 +0000 [ 66s] +++ /tmp/tmp.MBdpl64158/tmp.hJeTI64328 2021-03-28 23:44:20.605756089 +0000 [ 66s] @@ -16,9 +16,9 @@ [ 66s] 03cc 656e645f 706f7765 725f6461 7461006f end_power_data.o [ 66s] 03dc 70656e36 34007265 61640063 6c6f7365 pen64.read.close [ 66s] 03ec 00737472 6c656e00 77726974 65006174 .strlen.write.at [ 66s] - 03fc 6f69006c 69626861 6c2d6170 692d636f oi.libhal-api-co [ 66s] - 040c 6d6d6f6e 2e736f2e 30006c69 6268616c mmon.so.0.libhal [ 66s] - 041c 2d617069 2d706f77 65722e73 6f2e3000 -api-power.so.0. [ 66s] + 03fc 6f69006c 69626861 6c2d6170 692d706f oi.libhal-api-po [ 66s] + 040c 7765722e 736f2e30 006c6962 68616c2d wer.so.0.libhal- [ 66s] + 041c 6170692d 636f6d6d 6f6e2e73 6f2e3000 api-common.so.0. [ 66s] 042c 6c696264 6c2e736f 2e32006c 6962632e libdl.so.2.libc. [ 66s] 043c 736f2e36 006c6962 68616c2d 6261636b so.6.libhal-back [ 66s] 044c 656e642d 706f7765 722e736f 00474c49 end-power.so.GLI [ 66s] /hal/lib/libhal-backend-power.so differs in ELF section .dynamic [ 66s] --- /tmp/tmp.MBdpl64158/tmp.BbPkJ64326 2021-03-28 23:44:20.693758507 +0000 [ 66s] +++ /tmp/tmp.MBdpl64158/tmp.hJeTI64328 2021-03-28 23:44:20.697758617 +0000 [ 66s] @@ -2,7 +2,7 @@ [ 66s] /hal/lib/libhal-backend-power.so: file format elf32-littlearm [ 66s] [ 66s] Contents of section .dynamic: [ 66s] - 11934 01000000 e3000000 01000000 fa000000 ................ [ 66s] + 11934 01000000 e3000000 01000000 f9000000 ................ [ 66s] 11944 01000000 10010000 01000000 1b010000 ................ [ 66s] 11954 0e000000 25010000 0c000000 e8050000 ....%........... [ 66s] 11964 0d000000 b0170000 19000000 24190100 ............$... [ 66s] compare /.build.oldpackages/pass-hal-rpi-debuginfo-1.2.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pass-hal-rpi-debuginfo-1.2.0-12.2.armv7l.rpm [ 66s] skipping -debuginfo package [ 66s] compare /.build.oldpackages/pass-hal-rpi-debugsource-1.2.0-12.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pass-hal-rpi-debugsource-1.2.0-12.2.armv7l.rpm [ 66s] Comparing pass-hal-rpi-debugsource-1.2.0-12.1.armv7l.rpm to pass-hal-rpi-debugsource-1.2.0-12.2.armv7l.rpm [ 66s] This is not a prerelease project. Compare the project name. [ 66s] comparing rpmtags [ 66s] comparing RELEASE [ 66s] comparing PROVIDES [ 66s] comparing scripts [ 66s] comparing filelist [ 67s] comparing file checksum [ 67s] creating rename script [ 67s] RPM meta information is identical [ 67s] [ 67s] obsnw05 finished "build pass-hal-rpi.spec" at Sun Mar 28 23:44:21 UTC 2021. [ 67s] Retried build at Tue Mar 30 11:19:46 2021 returned same result, skipped Retried build at Wed Mar 31 06:01:52 2021 returned same result, skipped Retried build at Wed Mar 31 11:02:55 2021 returned same result, skipped Retried build at Thu Apr 1 11:37:33 2021 returned same result, skipped Retried build at Fri Apr 2 04:31:01 2021 returned same result, skipped Retried build at Fri Apr 2 05:45:43 2021 returned same result, skipped Retried build at Sat Apr 3 02:45:59 2021 returned same result, skipped Retried build at Tue Apr 20 09:28:09 2021 returned same result, skipped Retried build at Wed Apr 21 10:45:47 2021 returned same result, skipped Retried build at Thu Apr 22 01:33:23 2021 returned same result, skipped Retried build at Tue Apr 27 09:34:40 2021 returned same result, skipped Retried build at Thu Apr 29 01:36:02 2021 returned same result, skipped Retried build at Mon May 3 08:33:14 2021 returned same result, skipped Retried build at Mon May 3 17:26:50 2021 returned same result, skipped Retried build at Mon May 3 18:52:50 2021 returned same result, skipped Retried build at Wed May 5 14:48:13 2021 returned same result, skipped