[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw15 started "build _service:gbs:stability-monitor-kmod-rpi3.spec" at Mon May 3 18:11:02 UTC 2021. [ 0s] [ 0s] Building stability-monitor-kmod-rpi3 for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '2c2843ddca918e398029127bf8accfd1' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec build rpmlint-Factory ... [ 2s] copying qemu [ 2s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 2s] [ 2s] registering binfmt handlers for cross build [ 2s] write: Invalid argument [ 2s] /proc/sys/fs/binfmt_misc/register: write failed [ 2s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 2s] [ 2s] /.build/qemu-reg: No such file or directory [ 2s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 2s] /usr/lib/build/qemu-reg: No such file or directory [ 2s] /usr/lib/build/qemu-reg: binfmt registration failed [ 3s] cycle: libsoftokn3 -> nss [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/41] preinstalling libmagic-data... [ 3s] [2/41] preinstalling libncurses... [ 3s] [3/41] preinstalling setup... [ 3s] [4/41] preinstalling filesystem... [ 3s] [5/41] preinstalling glibc... [ 3s] [6/41] preinstalling libgcc... [ 3s] [7/41] preinstalling libzstd1... [ 3s] [8/41] preinstalling bash... [ 4s] [9/41] preinstalling diffutils... [ 4s] [10/41] preinstalling grep... [ 4s] [11/41] preinstalling libattr... [ 4s] [12/41] preinstalling libblkid... [ 4s] [13/41] preinstalling libbz2... [ 4s] [14/41] preinstalling libcap... [ 4s] [15/41] preinstalling libfreebl3... [ 4s] [16/41] preinstalling liblua... [ 4s] [17/41] preinstalling liblzma... [ 4s] [18/41] preinstalling libpopt... [ 4s] [19/41] preinstalling libreadline... [ 4s] [20/41] preinstalling libsmack... [ 4s] [21/41] preinstalling libsqlite... [ 4s] [22/41] preinstalling libuuid... [ 4s] [23/41] preinstalling nspr... [ 4s] [24/41] preinstalling sed... [ 4s] [25/41] preinstalling zlib... [ 4s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 11s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 12s] [28/41] preinstalling coreutils... [ 12s] [29/41] preinstalling libacl... [ 12s] [30/41] preinstalling libelf... [ 12s] [31/41] preinstalling libmount... [ 12s] [32/41] preinstalling smack... [ 12s] [33/41] preinstalling bzip2... [ 12s] [34/41] preinstalling libmagic... [ 12s] [35/41] preinstalling libxml2... [ 12s] [36/41] preinstalling tar... [ 12s] [37/41] preinstalling util-linux... [ 12s] [38/41] preinstalling util-linux-su... [ 12s] [39/41] preinstalling nss... [ 12s] [40/41] preinstalling libsoftokn3... [ 12s] [41/41] preinstalling rpm... [ 13s] [ 13s] running qemu-linux-user-x86_64-cross postinstall script [ 13s] running qemu-accel-x86_64-armv7l postinstall script [ 13s] running setup postinstall script [ 13s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 13s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 13s] initializing rpm db... [ 14s] reordering...cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 14s] [1/103] installing libmagic-data-5.39-4.116 [ 14s] [2/103] installing setup-0.9-4.32 [ 14s] warning: /etc/profile created as /etc/profile.rpmnew [ 14s] [3/103] installing filesystem-3.1-3.3 [ 15s] [4/103] installing glibc-2.30-7.6 [ 15s] [5/103] installing libatomic-9.2.0-9.17 [ 16s] [6/103] installing libgcc-9.2.0-9.17 [ 16s] [7/103] installing libzstd1-1.4.5-1.92 [ 17s] [8/103] installing bash-3.2.57-4.4 [ 17s] [9/103] installing cpio-2.8-5.2 [ 17s] [10/103] installing diffutils-3.3-4.2 [ 17s] [11/103] installing findutils-4.3.8-4.22 [ 17s] [12/103] installing gdbm-1.8.3-3.214 [ 17s] [13/103] installing hostname-3.23-3.2 [ 17s] [14/103] installing libattr-2.4.48-4.137 [ 18s] [15/103] installing libblkid-2.36-7.25 [ 18s] [16/103] installing libbz2-1.0.8-4.152 [ 18s] [17/103] installing libcap-2.24-3.197 [ 19s] [18/103] installing libexpat-2.2.9-3.95 [ 19s] [19/103] installing libext2fs-1.46.0-4.11 [ 20s] [20/103] installing libfreebl3-3.34.1-3.155 [ 20s] [21/103] installing libgfortran-9.2.0-9.17 [ 20s] [22/103] installing libgomp-9.2.0-9.17 [ 21s] [23/103] installing libitm-9.2.0-9.17 [ 21s] [24/103] installing libltdl-2.4.2-3.162 [ 22s] [25/103] installing liblua-5.1.5-3.139 [ 22s] [26/103] installing liblzma-5.2.5-4.77 [ 22s] [27/103] installing libopenssl11-1.1.1k-5.6 [ 23s] [28/103] installing libpcre-8.44-4.23 [ 23s] [29/103] installing libpopt-1.16-3.195 [ 24s] [30/103] installing libsmack-1.3.1-3.191 [ 24s] [31/103] installing libsmartcols-2.36-7.25 [ 24s] [32/103] installing libsqlite-3.33.0-4.121 [ 25s] [33/103] installing libstdc++-9.2.0-9.17 [ 25s] [34/103] installing libunwind-1.3.1-2.25 [ 26s] [35/103] installing libuuid-2.36-7.25 [ 26s] [36/103] installing m4-1.4.17-3.2 [ 26s] [37/103] installing net-tools-2.0_20121208git-4.3 [ 26s] [38/103] installing nspr-4.12-3.196 [ 27s] [39/103] installing patch-2.7-6.20 [ 27s] [40/103] installing pkg-config-0.28-3.189 [ 27s] [41/103] installing sed-4.1c-4.1 [ 27s] [42/103] installing update-alternatives-1.20.5-3.3 [ 27s] [43/103] installing which-2.17-4.3 [ 27s] [44/103] installing zlib-1.2.11-3.202 [ 27s] [45/103] installing build-compare-2015.04.28-3.76 [ 27s] [46/103] installing libstdc++-devel-9.2.0-9.17 [ 28s] [47/103] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 30s] [48/103] installing terminfo-base-full-6.2-5.110 [ 30s] [49/103] installing cpp-9.2.0-9.17 [ 31s] [50/103] installing gcc-c++-9.2.0-9.17 [ 32s] [51/103] installing binutils-2.33.1-9.2 [ 33s] [52/103] installing coreutils-6.9-5.10 [ 33s] [53/103] installing gawk-3.1.5-4.3 [ 33s] [54/103] installing grep-2.5.2-3.3 [ 33s] [55/103] installing libacl-2.2.53-4.136 [ 34s] [56/103] installing libcc1-9.2.0-9.17 [ 34s] [57/103] installing libelf-0.178-3.113 [ 35s] [58/103] installing libmount-2.36-7.25 [ 35s] [59/103] installing libubsan-9.2.0-9.17 [ 35s] [60/103] installing make-4.0-2.56 [ 36s] [61/103] installing nss-certs-3.34.1-3.155 [ 36s] [62/103] installing smack-1.3.1-3.191 [ 36s] [63/103] installing bzip2-1.0.8-4.152 [ 36s] [64/103] installing libfdisk-2.36-7.25 [ 36s] [65/103] installing libmagic-5.39-4.116 [ 37s] [66/103] installing libxml2-2.9.10-4.23 [ 37s] [67/103] installing perl-5.32.0-4.63 [ 39s] [68/103] installing xz-5.2.5-4.77 [ 39s] [69/103] installing kmod-28-10.1 [ 39s] [70/103] installing build-mkbaselibs-20120927-3.3 [ 39s] [71/103] installing kmod-compat-28-10.1 [ 40s] [72/103] installing linux-glibc-devel-3.10-4.41 [ 40s] [73/103] installing autoconf-2.69-3.122 [ 41s] [74/103] installing file-5.39-4.116 [ 41s] [75/103] installing glibc-locale-2.30-7.6 [ 42s] [76/103] installing tar-1.17-3.1 [ 42s] [77/103] installing gzip-1.3.12-3.196 [ 42s] [78/103] installing libncurses6-6.2-5.110 [ 42s] [79/103] installing pam-1.1.6-3.3 [ 43s] [80/103] installing tzdata-2020a-3.3 [ 43s] [81/103] installing libdw-0.178-3.113 [ 44s] [82/103] installing arm-rpi4-linux-kernel-devel-5.10.25-61.2 [ 59s] [83/103] installing libarchive-3.5.1-2.28 [ 60s] [84/103] installing gcc-9.2.0-9.17 [ 61s] [85/103] installing libncurses-6.2-5.110 [ 61s] [86/103] installing glibc-devel-2.30-7.6 [ 61s] [87/103] installing qemu-accel-x86_64-armv7l-0.4-7.1 [ 69s] [88/103] installing automake-1.15.1-3.147 [ 70s] [89/103] installing less-466-3.3 [ 70s] [90/103] installing libreadline-5.2-3.57 [ 70s] [91/103] installing procps-ng-3.3.16-3.3 [ 71s] [92/103] installing libasm-0.178-3.113 [ 71s] [93/103] installing build-20120927-3.3 [ 71s] [94/103] installing cmake-3.16.4-4.2 [ 72s] [95/103] installing arm-rpi3-linux-kernel-devel-4.19.49-96.2 [ 87s] [96/103] installing libtool-2.4.2-3.162 [ 87s] [97/103] installing elfutils-0.178-3.113 [ 87s] [98/103] installing util-linux-2.36-7.25 [ 87s] [99/103] installing util-linux-su-2.36-7.25 [ 87s] [100/103] installing nss-3.34.1-3.155 [ 88s] [101/103] installing libsoftokn3-3.34.1-3.155 [ 88s] [102/103] installing rpm-4.14.1.1-8.11 [ 89s] [103/103] installing rpm-build-4.14.1.1-8.11 [ 89s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 89s] now finalizing build dir... [ 90s] Running build time source services... [ 90s] build target is armv7l-tizen-linux [ 90s] ----------------------------------------------------------------- [ 90s] I have the following modifications for stability-monitor-kmod-rpi3.spec: [ 90s] 12c12 [ 90s] < Release: 0 [ 90s] --- [ 90s] > Release: 10.6 [ 90s] ----------------------------------------------------------------- [ 90s] ----- building stability-monitor-kmod-rpi3.spec (user abuild) [ 90s] ----------------------------------------------------------------- [ 90s] ----------------------------------------------------------------- [ 90s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/2c2843ddca918e398029127bf8accfd1-stability-monitor-kmod-rpi3' -ba /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.spec [ 91s] Building target platforms: armv7l-tizen-linux [ 91s] Building for target armv7l-tizen-linux [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.AOTDAd [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf stability-monitor-kmod-rpi3-6.4.0 [ 91s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3-6.4.0.tar.xz [ 91s] + /bin/tar -xof - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 91s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 91s] + cp /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.manifest ./stability-monitor-kmod-rpi3.manifest [ 91s] + exit 0 [ 91s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zQoYU9 [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 91s] ++ uname -m [ 91s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + LDFLAGS= [ 91s] + export LDFLAGS [ 91s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DLIBPATH=/usr/lib [ 91s] CMake Warning: [ 91s] No source or binary directory provided. Both will be assumed to be the [ 91s] same as the current working directory, but note that this warning will [ 91s] become a fatal error in future CMake releases. [ 91s] [ 91s] [ 91s] -- The C compiler identification is GNU 9.2.0 [ 91s] -- Check for working C compiler: /bin/cc [ 91s] -- Check for working C compiler: /bin/cc -- works [ 91s] -- Detecting C compiler ABI info [ 91s] -- Detecting C compiler ABI info - done [ 91s] -- Detecting C compile features [ 91s] -- Detecting C compile features - done [ 91s] -- Configuring done [ 91s] -- Generating done [ 91s] CMake Warning: [ 91s] Manually-specified variables were not used by the project: [ 91s] [ 91s] BUILD_SHARED_LIBS [ 91s] CMAKE_INSTALL_LIBDIR [ 91s] CMAKE_SKIP_RPATH [ 91s] INCLUDE_INSTALL_DIR [ 91s] LIB_INSTALL_DIR [ 91s] SHARE_INSTALL_PREFIX [ 91s] SYSCONF_INSTALL_DIR [ 91s] [ 91s] [ 91s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 91s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 [ 91s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 91s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 91s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 92s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 92s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 92s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3/ [ 92s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 92s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3/ M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel modules [ 92s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 94s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.o [ 94s] Building modules, stage 2. [ 95s] MODPOST 1 modules [ 95s] CC /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.mod.o [ 95s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 95s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 95s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 95s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 INSTALL_MOD_STRIP=1 [ 95s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 95s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/../ modules_install [ 95s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 97s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 97s] DEPMOD 4.19.49-arm-rpi3-v7 [ 97s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/4.19.49-arm-rpi3-v7: No such file or directory [ 97s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/4.19.49-arm-rpi3-v7: No such file or directory [ 97s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 97s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 97s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 97s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 97s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 97s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 98s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 98s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 98s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 98s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 98s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 98s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel modules [ 98s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 99s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.o [ 100s] MODPOST /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 100s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.mod.o [ 100s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 100s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 100s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 100s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 INSTALL_MOD_STRIP=1 [ 100s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 100s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/../ modules_install [ 100s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 101s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 102s] DEPMOD 5.10.25-arm-rpi4-v7l [ 102s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/5.10.25-arm-rpi4-v7l: No such file or directory [ 102s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/5.10.25-arm-rpi4-v7l: No such file or directory [ 102s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 102s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 102s] + exit 0 [ 102s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.xNBvEb [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 102s] + LANG=C [ 102s] + export LANG [ 102s] + unset DISPLAY [ 102s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm [ 102s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm [ 102s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm//usr/lib/stability-monitor [ 102s] + pushd lib/modules [ 102s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/lib/modules ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 102s] + find -name '*.ko' -exec cp -a --parents '{}' /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm//usr/lib/stability-monitor/ ';' [ 102s] + popd [ 102s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 102s] + install -D config/stability-monitor.conf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm/etc/modprobe.d/stability-monitor.conf [ 102s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 6.4.0-10.6 --unique-debug-src-base stability-monitor-kmod-rpi3-6.4.0-10.6.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 102s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/stability-monitor-kmod-rpi3-debuginfo.manifest [ 102s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/stability-monitor-kmod-rpi3-debugsource.manifest [ 102s] + /usr/lib/rpm/check-buildroot [ 102s] + /usr/lib/rpm//brp-compress [ 102s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 102s] + /usr/lib/rpm/brp-python-hardlink [ 102s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm [ 102s] Processing files: stability-monitor-kmod-rpi3-6.4.0-10.6.armv7l [ 102s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 102s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 102s] [ 102s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.UcRLkd [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 102s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 102s] + export LC_ALL=C [ 102s] + LC_ALL=C [ 102s] + export LICENSEDIR [ 102s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 102s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 102s] + exit 0 [ 103s] Provides: stability-monitor-kernel-module stability-monitor-kmod-rpi3 = 6.4.0-10.6 stability-monitor-kmod-rpi3(armv7l-32) = 6.4.0-10.6 [ 103s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 103s] Processing files: stability-monitor-kmod-rpi3-debugsource-6.4.0-10.6.armv7l [ 103s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/debugsourcefiles.list [ 103s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 103s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 103s] [ 103s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm [ 103s] Wrote: /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.4.0-10.6.src.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-6.4.0-10.6.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-debugsource-6.4.0-10.6.armv7l.rpm [ 103s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.WPT1Da [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-10.6.arm [ 103s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 [ 103s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 103s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 103s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 104s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/.tmp_versions [ 104s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 104s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 104s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 104s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 104s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 104s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 104s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 105s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 105s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 105s] + rm -rf '/home/abuild/rpmbuild/BUILD/%{Name}-6.4.0/lib' [ 105s] + exit 0 [ 105s] ... checking for files with abuild user/group [ 105s] ... creating baselibs [ 106s] ... comparing built packages with the former built [ 106s] /usr/lib/build/pkg-diff.sh [ 106s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.4.0-10.5.src.rpm /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.4.0-10.6.src.rpm [ 106s] This is not a prerelease project. Compare the project name. [ 106s] comparing rpmtags [ 106s] comparing RELEASE [ 106s] comparing PROVIDES [ 106s] comparing scripts [ 106s] comparing filelist [ 106s] comparing file checksum [ 106s] RPM meta information is identical [ 106s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.4.0-10.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-6.4.0-10.6.armv7l.rpm [ 106s] Comparing stability-monitor-kmod-rpi3-6.4.0-10.5.armv7l.rpm to stability-monitor-kmod-rpi3-6.4.0-10.6.armv7l.rpm [ 106s] This is not a prerelease project. Compare the project name. [ 106s] comparing rpmtags [ 107s] comparing RELEASE [ 107s] comparing PROVIDES [ 107s] comparing scripts [ 107s] comparing filelist [ 107s] comparing file checksum [ 107s] creating rename script [ 107s] RPM file checksum differs. [ 107s] Extracting packages [ 107s] /usr/lib/stability-monitor/4.19.49-arm-rpi3-v7/extra/proc-tsm.ko differs in ELF section .comment [ 107s] --- /tmp/tmp.eddu129057/tmp.OiMS129156 2021-05-03 18:12:49.575971522 +0000 [ 107s] +++ /tmp/tmp.eddu129057/tmp.Jneu129158 2021-05-03 18:12:49.579971411 +0000 [ 107s] @@ -4,7 +4,7 @@ [ 107s] Contents of section .comment: [ 107s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 107s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 107s] - 0020 392e3429 20392e32 2e300000 4743433a 9.4) 9.2.0..GCC: [ 107s] + 0020 392e3629 20392e32 2e300000 4743433a 9.6) 9.2.0..GCC: [ 107s] 0030 20285469 7a656e20 47434320 392e322e (Tizen GCC 9.2. [ 107s] - 0040 30203230 31393038 31322039 2e342920 0 20190812 9.4) [ 107s] + 0040 30203230 31393038 31322039 2e362920 0 20190812 9.6) [ 107s] 0050 392e322e 3000 9.2.0. [ 107s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-debugsource-6.4.0-10.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-debugsource-6.4.0-10.6.armv7l.rpm [ 107s] Comparing stability-monitor-kmod-rpi3-debugsource-6.4.0-10.5.armv7l.rpm to stability-monitor-kmod-rpi3-debugsource-6.4.0-10.6.armv7l.rpm [ 107s] This is not a prerelease project. Compare the project name. [ 107s] comparing rpmtags [ 107s] comparing RELEASE [ 107s] comparing PROVIDES [ 107s] comparing scripts [ 107s] comparing filelist [ 107s] comparing file checksum [ 108s] creating rename script [ 108s] RPM meta information is identical [ 108s] [ 108s] obspw15 finished "build stability-monitor-kmod-rpi3.spec" at Mon May 3 18:12:50 UTC 2021. [ 108s]