[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw07 started "build _service:gbs:spirv-tools.spec" at Mon May 3 15:18:37 UTC 2021. [ 0s] [ 0s] Building spirv-tools for project 'Tizen:Unified' repository 'standard' arch 'x86_64' srcmd5 '66fc88b20d673d8246f5244d46dd1312' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:spirv-tools.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:spirv-tools.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:spirv-tools.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/36] preinstalling libmagic-data... [ 0s] [2/36] preinstalling libncurses... [ 0s] [3/36] preinstalling setup... [ 0s] [4/36] preinstalling filesystem... [ 0s] [5/36] preinstalling glibc... [ 1s] [6/36] preinstalling bash... [ 1s] [7/36] preinstalling diffutils... [ 1s] [8/36] preinstalling grep... [ 1s] [9/36] preinstalling libattr... [ 1s] [10/36] preinstalling libbz2... [ 1s] [11/36] preinstalling libcap... [ 1s] [12/36] preinstalling libfreebl3... [ 1s] [13/36] preinstalling libgcc... [ 1s] [14/36] preinstalling liblua... [ 1s] [15/36] preinstalling liblzma... [ 1s] [16/36] preinstalling libpopt... [ 1s] [17/36] preinstalling libreadline... [ 1s] [18/36] preinstalling libsmack... [ 1s] [19/36] preinstalling libsqlite... [ 1s] [20/36] preinstalling libzstd1... [ 1s] [21/36] preinstalling nspr... [ 1s] [22/36] preinstalling sed... [ 1s] [23/36] preinstalling zlib... [ 1s] [24/36] preinstalling coreutils... [ 1s] [25/36] preinstalling libacl... [ 1s] [26/36] preinstalling libelf... [ 1s] [27/36] preinstalling smack... [ 1s] [28/36] preinstalling bzip2... [ 1s] [29/36] preinstalling libmagic... [ 1s] [30/36] preinstalling libxml2... [ 1s] [31/36] preinstalling util-linux... [ 1s] [32/36] preinstalling tar... [ 1s] [33/36] preinstalling util-linux-su... [ 1s] [34/36] preinstalling nss... [ 1s] [35/36] preinstalling libsoftokn3... [ 1s] [36/36] preinstalling rpm... [ 2s] [ 2s] running setup postinstall script [ 2s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 2s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 2s] initializing rpm db... [ 2s] reordering...cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 2s] [1/102] installing libmagic-data-5.39-4.129 [ 2s] [2/102] installing setup-0.9-4.31 [ 2s] [3/102] installing spirv-headers-devel-1.2-2.2 [ 2s] [4/102] installing filesystem-3.1-3.2 [ 2s] [5/102] installing glibc-2.30-7.6 [ 3s] [6/102] installing bash-3.2.57-4.4 [ 3s] [7/102] installing cpio-2.8-5.2 [ 3s] [8/102] installing diffutils-3.3-4.2 [ 3s] [9/102] installing findutils-4.3.8-4.23 [ 3s] [10/102] installing gdbm-1.8.3-3.221 [ 3s] [11/102] installing hostname-3.23-3.3 [ 3s] [12/102] installing libatomic-9.2.0-9.14 [ 4s] [13/102] installing libattr-2.4.48-4.131 [ 4s] [14/102] installing libblkid-2.36-7.25 [ 4s] [15/102] installing libbz2-1.0.8-4.159 [ 5s] [16/102] installing libcap-2.24-3.197 [ 5s] [17/102] installing libexpat-2.2.9-3.102 [ 5s] [18/102] installing libext2fs-1.46.0-4.10 [ 5s] [19/102] installing libfreebl3-3.34.1-3.145 [ 6s] [20/102] installing libgcc-9.2.0-9.14 [ 6s] [21/102] installing libgomp-9.2.0-9.14 [ 6s] [22/102] installing libitm-9.2.0-9.14 [ 7s] [23/102] installing libltdl-2.4.2-3.177 [ 7s] [24/102] installing liblua-5.1.5-3.122 [ 7s] [25/102] installing liblzma-5.2.5-4.78 [ 8s] [26/102] installing libopenssl11-1.1.1k-5.7 [ 8s] [27/102] installing libpcre-8.44-4.36 [ 8s] [28/102] installing libpopt-1.16-3.191 [ 8s] [29/102] installing libpython-2.7.18-4.49 [ 9s] [30/102] installing libquadmath-9.2.0-9.14 [ 9s] [31/102] installing libsmack-1.3.1-3.193 [ 9s] [32/102] installing libsmartcols-2.36-7.25 [ 10s] [33/102] installing libsqlite-3.33.0-4.107 [ 10s] [34/102] installing libuuid-2.36-7.25 [ 10s] [35/102] installing libzstd1-1.4.5-1.82 [ 11s] [36/102] installing m4-1.4.17-3.2 [ 11s] [37/102] installing net-tools-2.0_20121208git-4.3 [ 11s] [38/102] installing nspr-4.12-3.191 [ 11s] [39/102] installing patch-2.7-6.22 [ 11s] [40/102] installing pkg-config-0.28-3.197 [ 11s] [41/102] installing sed-4.1c-4.1 [ 11s] [42/102] installing update-alternatives-1.20.5-3.3 [ 11s] [43/102] installing which-2.17-4.3 [ 11s] [44/102] installing zlib-1.2.11-3.203 [ 11s] [45/102] installing build-compare-2015.04.28-3.69 [ 11s] [46/102] installing terminfo-base-full-6.2-5.106 [ 12s] [47/102] installing coreutils-6.9-5.8 [ 12s] [48/102] installing cpp-9.2.0-9.14 [ 13s] [49/102] installing gawk-3.1.5-4.4 [ 13s] [50/102] installing gcc-c++-9.2.0-9.14 [ 14s] [51/102] installing grep-2.5.2-3.4 [ 14s] [52/102] installing libacl-2.2.53-4.129 [ 14s] [53/102] installing libelf-0.178-3.118 [ 14s] [54/102] installing libmount-2.36-7.25 [ 15s] [55/102] installing libstdc++-9.2.0-9.14 [ 15s] [56/102] installing make-4.0-2.54 [ 15s] [57/102] installing nss-certs-3.34.1-3.145 [ 15s] [58/102] installing smack-1.3.1-3.193 [ 15s] [59/102] installing bzip2-1.0.8-4.159 [ 15s] [60/102] installing libfdisk-2.36-7.25 [ 16s] [61/102] installing libgfortran-9.2.0-9.14 [ 16s] [62/102] installing libmagic-5.39-4.129 [ 16s] [63/102] installing libxml2-2.9.10-4.19 [ 17s] [64/102] installing perl-5.32.0-4.74 [ 19s] [65/102] installing xz-5.2.5-4.78 [ 19s] [66/102] installing build-mkbaselibs-20120927-3.2 [ 19s] [67/102] installing libstdc++-devel-9.2.0-9.14 [ 20s] [68/102] installing file-5.39-4.129 [ 20s] [69/102] installing linux-glibc-devel-3.10-4.45 [ 21s] [70/102] installing tar-1.17-3.1 [ 21s] [71/102] installing autoconf-2.69-3.140 [ 21s] [72/102] installing binutils-2.33.1-9.3 [ 22s] [73/102] installing db4-4.8.30.NC-3.192 [ 22s] [74/102] installing glibc-locale-2.30-7.6 [ 23s] [75/102] installing gzip-1.3.12-3.190 [ 23s] [76/102] installing libcc1-9.2.0-9.14 [ 23s] [77/102] installing libubsan-9.2.0-9.14 [ 23s] [78/102] installing pam-1.1.6-3.4 [ 23s] [79/102] installing libncurses6-6.2-5.106 [ 24s] [80/102] installing tzdata-2020a-3.3 [ 24s] [81/102] installing libdw-0.178-3.118 [ 24s] [82/102] installing libarchive-3.5.1-2.31 [ 25s] [83/102] installing libncurses-6.2-5.106 [ 25s] [84/102] installing glibc-devel-2.30-7.6 [ 25s] [85/102] installing less-466-3.4 [ 25s] [86/102] installing libreadline-5.2-3.46 [ 25s] [87/102] installing procps-ng-3.3.16-3.3 [ 26s] [88/102] installing automake-1.15.1-3.159 [ 26s] [89/102] installing libasm-0.178-3.118 [ 26s] [90/102] installing build-20120927-3.2 [ 26s] [91/102] installing cmake-3.16.4-4.2 [ 28s] [92/102] installing gcc-9.2.0-9.14 [ 29s] [93/102] installing libtool-2.4.2-3.177 [ 29s] [94/102] installing elfutils-0.178-3.118 [ 29s] [95/102] installing python-2.7.18-4.49 [ 30s] [96/102] installing util-linux-2.36-7.25 [ 30s] [97/102] installing python-xml-2.7.18-4.49 [ 31s] [98/102] installing util-linux-su-2.36-7.25 [ 31s] [99/102] installing nss-3.34.1-3.145 [ 31s] [100/102] installing libsoftokn3-3.34.1-3.145 [ 31s] [101/102] installing rpm-4.14.1.1-8.11 [ 32s] [102/102] installing rpm-build-4.14.1.1-8.11 [ 32s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 32s] now finalizing build dir... [ 32s] Running build time source services... [ 32s] ----------------------------------------------------------------- [ 32s] I have the following modifications for spirv-tools.spec: [ 32s] 4c4 [ 32s] < Release: 0 [ 32s] --- [ 32s] > Release: 3.91 [ 32s] ----------------------------------------------------------------- [ 32s] ----- building spirv-tools.spec (user abuild) [ 32s] ----------------------------------------------------------------- [ 32s] ----------------------------------------------------------------- [ 32s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/66fc88b20d673d8246f5244d46dd1312-spirv-tools' -ba /home/abuild/rpmbuild/SOURCES/spirv-tools.spec [ 32s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UuEakR [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + rm -rf spirv-tools-2018.6 [ 32s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/spirv-tools-2018.6.tar.gz [ 32s] + /bin/tar -xof - [ 32s] + STATUS=0 [ 32s] + '[' 0 -ne 0 ']' [ 32s] + cd spirv-tools-2018.6 [ 32s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 32s] + echo 'Patch #0 (0001-Add-dependency-for-SPIRV-Headers.patch):' [ 32s] Patch #0 (0001-Add-dependency-for-SPIRV-Headers.patch): [ 32s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 32s] patching file source/CMakeLists.txt [ 32s] + echo 'Patch #1 (0002-do-not-use-the-external.patch):' [ 32s] Patch #1 (0002-do-not-use-the-external.patch): [ 32s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 32s] patching file CMakeLists.txt [ 32s] + exit 0 [ 32s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.DecrQT [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd spirv-tools-2018.6 [ 32s] ++ uname -m [ 32s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 32s] + export CFLAGS [ 32s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 32s] + export CXXFLAGS [ 32s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 32s] + export FFLAGS [ 32s] + LDFLAGS= [ 32s] + export LDFLAGS [ 32s] + cp /home/abuild/rpmbuild/SOURCES/spirv-tools.manifest . [ 32s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wno-stringop-truncation' [ 32s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wno-stringop-truncation' [ 32s] + export 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wno-stringop-truncation' [ 32s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wno-stringop-truncation' [ 32s] + cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_LIBDIR=/usr/lib64 -DCMAKE_INSTALL_INCLUDEDIR=/usr/include -DCMAKE_INSTALL_DATADIR=/usr/share -DCMAKE_INSTALL_BINDIR=/usr/bin [ 32s] CMake Warning: [ 32s] No source or binary directory provided. Both will be assumed to be the [ 32s] same as the current working directory, but note that this warning will [ 32s] become a fatal error in future CMake releases. [ 32s] [ 32s] [ 32s] -- The C compiler identification is GNU 9.2.0 [ 33s] -- The CXX compiler identification is GNU 9.2.0 [ 33s] -- Check for working C compiler: /bin/cc [ 33s] -- Check for working C compiler: /bin/cc -- works [ 33s] -- Detecting C compiler ABI info [ 33s] -- Detecting C compiler ABI info - done [ 33s] -- Detecting C compile features [ 33s] -- Detecting C compile features - done [ 33s] -- Check for working CXX compiler: /bin/c++ [ 33s] -- Check for working CXX compiler: /bin/c++ -- works [ 33s] -- Detecting CXX compiler ABI info [ 33s] -- Detecting CXX compiler ABI info - done [ 33s] -- Detecting CXX compile features [ 33s] -- Detecting CXX compile features - done [ 33s] -- SPIRV-Tools: nosetests was not found - python support code will not be tested [ 33s] -- Found PythonInterp: /bin/python (found version "2.7.18") [ 33s] -- Did not find googletest, tests will not be built. To enable tests place googletest in '/external/googletest'. [ 33s] -- Configuring done [ 33s] -- Generating done [ 33s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6 [ 33s] + make [ 33s] Scanning dependencies of target spirv-tools-shared-pkg-config [ 33s] [ 0%] Built target spirv-tools-shared-pkg-config [ 33s] Scanning dependencies of target spirv-tools-pkg-config [ 33s] [ 0%] Built target spirv-tools-pkg-config [ 33s] [ 0%] Update build-version.inc in the SPIRV-Tools build directory (if necessary). [ 33s] [ 1%] Generate enum-string mapping for SPIR-V vunified1. [ 33s] [ 1%] Generate info tables for OpenCL extended instructions and operands vunified1. [ 33s] [ 2%] Generate info tables for GLSL extended instructions and operands vunified1. [ 33s] [ 2%] Generate extended instruction tables for spv-amd-shader-explicit-vertex-parameter. [ 33s] [ 2%] Generate extended instruction tables for spv-amd-shader-trinary-minmax. [ 33s] [ 3%] Generate extended instruction tables for spv-amd-gcn-shader. [ 33s] [ 3%] Generate extended instruction tables for spv-amd-shader-ballot. [ 33s] [ 3%] Generate extended instruction tables for debuginfo. [ 33s] [ 4%] Generate language specific header for DebugInfo. [ 33s] [ 4%] Generate info tables for SPIR-V vunified1 core instructions and operands. [ 33s] [ 5%] Generate tables based on the SPIR-V XML registry. [ 33s] Scanning dependencies of target SPIRV-Tools-shared [ 33s] [ 5%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/bit_vector.cpp.o [ 34s] [ 6%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/parse_number.cpp.o [ 35s] [ 6%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/string_utils.cpp.o [ 36s] [ 6%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/assembly_grammar.cpp.o [ 37s] [ 7%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/binary.cpp.o [ 39s] [ 7%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/diagnostic.cpp.o [ 40s] [ 8%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/disassemble.cpp.o [ 41s] [ 8%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/enum_string_mapping.cpp.o [ 41s] [ 8%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/ext_inst.cpp.o [ 42s] [ 9%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/extensions.cpp.o [ 42s] [ 9%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/id_descriptor.cpp.o [ 43s] [ 9%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/libspirv.cpp.o [ 43s] [ 10%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/name_mapper.cpp.o [ 45s] [ 10%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/opcode.cpp.o [ 46s] [ 11%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/operand.cpp.o [ 46s] [ 11%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/parsed_operand.cpp.o [ 47s] [ 11%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/print.cpp.o [ 47s] [ 12%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/software_version.cpp.o [ 47s] [ 12%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_endian.cpp.o [ 47s] [ 12%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_optimizer_options.cpp.o [ 47s] [ 13%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_target_env.cpp.o [ 47s] [ 13%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/spirv_validator_options.cpp.o [ 47s] [ 13%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/table.cpp.o [ 48s] [ 14%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/text.cpp.o [ 50s] [ 14%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/text_handler.cpp.o [ 52s] [ 15%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate.cpp.o [ 55s] [ 15%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_adjacency.cpp.o [ 56s] [ 15%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_annotation.cpp.o [ 58s] [ 16%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_arithmetics.cpp.o [ 59s] [ 16%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_atomics.cpp.o [ 60s] [ 16%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_barriers.cpp.o [ 62s] [ 17%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_bitwise.cpp.o [ 63s] [ 17%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_builtins.cpp.o [ 68s] [ 18%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_capability.cpp.o [ 70s] [ 18%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_cfg.cpp.o [ 74s] [ 18%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_composites.cpp.o [ 75s] [ 19%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_constants.cpp.o [ 76s] [ 19%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_conversion.cpp.o [ 78s] [ 19%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_datarules.cpp.o [ 79s] [ 20%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_debug.cpp.o [ 80s] [ 20%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_decorations.cpp.o [ 83s] [ 21%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_derivatives.cpp.o [ 84s] [ 21%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_ext_inst.cpp.o [ 88s] [ 21%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_execution_limitations.cpp.o [ 89s] [ 22%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_function.cpp.o [ 91s] [ 22%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_id.cpp.o [ 92s] [ 22%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_image.cpp.o [ 94s] [ 23%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_interfaces.cpp.o [ 96s] [ 23%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_instruction.cpp.o [ 98s] [ 24%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_layout.cpp.o [ 99s] [ 24%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_literals.cpp.o [ 100s] [ 24%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_logicals.cpp.o [ 101s] [ 25%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_memory.cpp.o [ 103s] [ 25%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_mode_setting.cpp.o [ 105s] [ 25%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_non_uniform.cpp.o [ 106s] [ 26%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_primitives.cpp.o [ 107s] [ 26%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validate_type.cpp.o [ 109s] [ 26%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/basic_block.cpp.o [ 110s] [ 27%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/construct.cpp.o [ 110s] [ 27%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/function.cpp.o [ 113s] [ 28%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/instruction.cpp.o [ 114s] [ 28%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/val/validation_state.cpp.o [ 117s] [ 28%] Building CXX object source/CMakeFiles/SPIRV-Tools-shared.dir/util/timer.cpp.o [ 118s] [ 29%] Linking CXX shared library libSPIRV-Tools-shared.so [ 119s] [ 29%] Built target SPIRV-Tools-shared [ 119s] Scanning dependencies of target SPIRV-Tools [ 119s] [ 29%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/bit_vector.cpp.o [ 119s] [ 30%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/parse_number.cpp.o [ 121s] [ 30%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/string_utils.cpp.o [ 121s] [ 30%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/assembly_grammar.cpp.o [ 122s] [ 31%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/binary.cpp.o [ 124s] [ 31%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/diagnostic.cpp.o [ 125s] [ 32%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/disassemble.cpp.o [ 126s] [ 32%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/enum_string_mapping.cpp.o [ 127s] [ 32%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/ext_inst.cpp.o [ 127s] [ 33%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/extensions.cpp.o [ 127s] [ 33%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/id_descriptor.cpp.o [ 128s] [ 33%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/libspirv.cpp.o [ 129s] [ 34%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/name_mapper.cpp.o [ 130s] [ 34%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/opcode.cpp.o [ 131s] [ 35%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/operand.cpp.o [ 132s] [ 35%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/parsed_operand.cpp.o [ 132s] [ 35%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/print.cpp.o [ 133s] [ 36%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/software_version.cpp.o [ 133s] [ 36%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_endian.cpp.o [ 133s] [ 36%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_optimizer_options.cpp.o [ 133s] [ 37%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_target_env.cpp.o [ 133s] [ 37%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/spirv_validator_options.cpp.o [ 133s] [ 38%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/table.cpp.o [ 133s] [ 38%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/text.cpp.o [ 136s] [ 38%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/text_handler.cpp.o [ 138s] [ 39%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate.cpp.o [ 140s] [ 39%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_adjacency.cpp.o [ 141s] [ 39%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_annotation.cpp.o [ 143s] [ 40%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_arithmetics.cpp.o [ 144s] [ 40%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_atomics.cpp.o [ 146s] [ 40%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_barriers.cpp.o [ 147s] [ 41%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_bitwise.cpp.o [ 149s] [ 41%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_builtins.cpp.o [ 154s] [ 42%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_capability.cpp.o [ 155s] [ 42%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_cfg.cpp.o [ 159s] [ 42%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_composites.cpp.o [ 161s] [ 43%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_constants.cpp.o [ 162s] [ 43%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_conversion.cpp.o [ 164s] [ 43%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_datarules.cpp.o [ 165s] [ 44%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_debug.cpp.o [ 166s] [ 44%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_decorations.cpp.o [ 169s] [ 45%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_derivatives.cpp.o [ 170s] [ 45%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_ext_inst.cpp.o [ 174s] [ 45%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_execution_limitations.cpp.o [ 175s] [ 46%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_function.cpp.o [ 176s] [ 46%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_id.cpp.o [ 178s] [ 46%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_image.cpp.o [ 180s] [ 47%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_interfaces.cpp.o [ 181s] [ 47%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_instruction.cpp.o [ 183s] [ 48%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_layout.cpp.o [ 184s] [ 48%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_literals.cpp.o [ 185s] [ 48%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_logicals.cpp.o [ 187s] [ 50%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_memory.cpp.o [ 189s] [ 50%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_mode_setting.cpp.o [ 190s] [ 50%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_non_uniform.cpp.o [ 191s] [ 51%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_primitives.cpp.o [ 193s] [ 51%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validate_type.cpp.o [ 194s] [ 52%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/basic_block.cpp.o [ 195s] [ 52%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/construct.cpp.o [ 196s] [ 52%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/function.cpp.o [ 198s] [ 53%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/instruction.cpp.o [ 199s] [ 53%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/val/validation_state.cpp.o [ 202s] [ 53%] Building CXX object source/CMakeFiles/SPIRV-Tools.dir/util/timer.cpp.o [ 203s] [ 54%] Linking CXX static library libSPIRV-Tools.a [ 203s] [ 58%] Built target SPIRV-Tools [ 203s] Scanning dependencies of target SPIRV-Tools-opt [ 203s] [ 59%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/aggressive_dead_code_elim_pass.cpp.o [ 211s] [ 59%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/basic_block.cpp.o [ 216s] [ 60%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/block_merge_pass.cpp.o [ 220s] [ 60%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/build_module.cpp.o [ 226s] [ 60%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ccp_pass.cpp.o [ 231s] [ 61%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/cfg_cleanup_pass.cpp.o [ 235s] [ 61%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/cfg.cpp.o [ 241s] [ 61%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/combine_access_chains.cpp.o [ 248s] [ 62%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/common_uniform_elim_pass.cpp.o [ 257s] [ 62%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/compact_ids_pass.cpp.o [ 260s] [ 63%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/composite.cpp.o [ 264s] [ 63%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/const_folding_rules.cpp.o [ 270s] [ 63%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/constants.cpp.o [ 275s] [ 64%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/copy_prop_arrays.cpp.o [ 282s] [ 64%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dead_branch_elim_pass.cpp.o [ 289s] [ 64%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dead_insert_elim_pass.cpp.o [ 293s] [ 65%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dead_variable_elimination.cpp.o [ 297s] [ 65%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/decoration_manager.cpp.o [ 303s] [ 66%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/def_use_manager.cpp.o [ 305s] [ 66%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dominator_analysis.cpp.o [ 308s] [ 66%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/dominator_tree.cpp.o [ 314s] [ 67%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/eliminate_dead_constant_pass.cpp.o [ 318s] [ 67%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/eliminate_dead_functions_pass.cpp.o [ 322s] [ 67%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/feature_manager.cpp.o [ 323s] [ 68%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/flatten_decoration_pass.cpp.o [ 327s] [ 68%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/fold.cpp.o [ 332s] [ 69%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/folding_rules.cpp.o [ 342s] [ 69%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/fold_spec_constant_op_and_composite_pass.cpp.o [ 349s] [ 69%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/freeze_spec_constant_value_pass.cpp.o [ 352s] [ 70%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/function.cpp.o [ 354s] [ 70%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/if_conversion.cpp.o [ 360s] [ 70%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inline_exhaustive_pass.cpp.o [ 364s] [ 71%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inline_opaque_pass.cpp.o [ 369s] [ 71%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inline_pass.cpp.o [ 376s] [ 72%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/inst_bindless_check_pass.cpp.o [ 382s] [ 72%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/instruction.cpp.o [ 388s] [ 72%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/instruction_list.cpp.o [ 388s] [ 73%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/instrument_pass.cpp.o [ 397s] [ 73%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ir_context.cpp.o [ 404s] [ 73%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ir_loader.cpp.o [ 406s] [ 74%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/licm_pass.cpp.o [ 410s] [ 74%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_access_chain_convert_pass.cpp.o [ 416s] [ 74%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_redundancy_elimination.cpp.o [ 420s] [ 75%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_single_block_elim_pass.cpp.o [ 426s] [ 75%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_single_store_elim_pass.cpp.o [ 432s] [ 76%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/local_ssa_elim_pass.cpp.o [ 436s] [ 76%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_dependence.cpp.o [ 443s] [ 76%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_dependence_helpers.cpp.o [ 448s] [ 77%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_descriptor.cpp.o [ 455s] [ 77%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_fission.cpp.o [ 462s] [ 77%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_fusion.cpp.o [ 470s] [ 78%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_fusion_pass.cpp.o [ 473s] [ 78%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_peeling.cpp.o [ 482s] [ 79%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_utils.cpp.o [ 490s] [ 79%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_unroller.cpp.o [ 498s] [ 79%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/loop_unswitch_pass.cpp.o [ 511s] [ 80%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/mem_pass.cpp.o [ 518s] [ 80%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/merge_return_pass.cpp.o [ 527s] [ 80%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/module.cpp.o [ 531s] [ 81%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/optimizer.cpp.o [ 541s] [ 81%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/pass.cpp.o [ 545s] [ 82%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/pass_manager.cpp.o [ 549s] [ 82%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/private_to_local_pass.cpp.o [ 553s] [ 82%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/propagator.cpp.o [ 558s] [ 83%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/reduce_load_size.cpp.o [ 563s] [ 83%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/redundancy_elimination.cpp.o [ 567s] [ 83%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/register_pressure.cpp.o [ 573s] [ 84%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/remove_duplicates_pass.cpp.o [ 577s] [ 84%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/replace_invalid_opc.cpp.o [ 582s] [ 85%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/scalar_analysis.cpp.o [ 587s] [ 85%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/scalar_analysis_simplification.cpp.o [ 589s] [ 85%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/scalar_replacement_pass.cpp.o [ 597s] [ 86%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/set_spec_constant_default_value_pass.cpp.o [ 602s] [ 86%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/simplification_pass.cpp.o [ 606s] [ 86%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/ssa_rewrite_pass.cpp.o [ 612s] [ 87%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/strength_reduction_pass.cpp.o [ 616s] [ 87%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/strip_debug_info_pass.cpp.o [ 620s] [ 87%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/strip_reflect_info_pass.cpp.o [ 623s] [ 88%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/struct_cfg_analysis.cpp.o [ 628s] [ 88%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/type_manager.cpp.o [ 635s] [ 89%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/types.cpp.o [ 639s] [ 89%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/unify_const_pass.cpp.o [ 642s] [ 89%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/value_number_table.cpp.o [ 647s] [ 90%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/vector_dce.cpp.o [ 652s] [ 90%] Building CXX object source/opt/CMakeFiles/SPIRV-Tools-opt.dir/workaround1209.cpp.o [ 656s] [ 90%] Linking CXX static library libSPIRV-Tools-opt.a [ 658s] [ 90%] Built target SPIRV-Tools-opt [ 658s] Scanning dependencies of target SPIRV-Tools-link [ 658s] [ 90%] Building CXX object source/link/CMakeFiles/SPIRV-Tools-link.dir/linker.cpp.o [ 667s] [ 90%] Linking CXX static library libSPIRV-Tools-link.a [ 667s] [ 90%] Built target SPIRV-Tools-link [ 667s] Scanning dependencies of target spirv-opt [ 667s] [ 90%] Building CXX object tools/CMakeFiles/spirv-opt.dir/opt/opt.cpp.o [ 668s] [ 91%] Building CXX object tools/CMakeFiles/spirv-opt.dir/util/cli_consumer.cpp.o [ 669s] [ 91%] Linking CXX executable spirv-opt [ 674s] [ 91%] Built target spirv-opt [ 674s] Scanning dependencies of target spirv-as [ 674s] [ 91%] Building CXX object tools/CMakeFiles/spirv-as.dir/as/as.cpp.o [ 675s] [ 91%] Linking CXX executable spirv-as [ 675s] [ 91%] Built target spirv-as [ 675s] Scanning dependencies of target spirv-dis [ 675s] [ 91%] Building CXX object tools/CMakeFiles/spirv-dis.dir/dis/dis.cpp.o [ 675s] [ 91%] Linking CXX executable spirv-dis [ 675s] [ 91%] Built target spirv-dis [ 675s] Scanning dependencies of target spirv-stats [ 675s] [ 92%] Building CXX object tools/CMakeFiles/spirv-stats.dir/stats/stats.cpp.o [ 677s] [ 92%] Building CXX object tools/CMakeFiles/spirv-stats.dir/stats/stats_analyzer.cpp.o [ 682s] [ 92%] Building CXX object tools/CMakeFiles/spirv-stats.dir/stats/spirv_stats.cpp.o [ 685s] [ 93%] Linking CXX executable spirv-stats [ 686s] [ 93%] Built target spirv-stats [ 686s] Scanning dependencies of target spirv-val [ 686s] [ 94%] Building CXX object tools/CMakeFiles/spirv-val.dir/val/val.cpp.o [ 687s] [ 94%] Building CXX object tools/CMakeFiles/spirv-val.dir/util/cli_consumer.cpp.o [ 687s] [ 95%] Linking CXX executable spirv-val [ 688s] [ 95%] Built target spirv-val [ 688s] Scanning dependencies of target spirv-cfg [ 688s] [ 96%] Building CXX object tools/CMakeFiles/spirv-cfg.dir/cfg/cfg.cpp.o [ 688s] [ 96%] Building CXX object tools/CMakeFiles/spirv-cfg.dir/cfg/bin_to_dot.cpp.o [ 689s] [ 97%] Linking CXX executable spirv-cfg [ 689s] [ 97%] Built target spirv-cfg [ 689s] Scanning dependencies of target spirv-link [ 689s] [ 98%] Building CXX object tools/CMakeFiles/spirv-link.dir/link/linker.cpp.o [ 690s] [ 98%] Linking CXX executable spirv-link [ 692s] [ 98%] Built target spirv-link [ 692s] Scanning dependencies of target spirv-tools-cpp-example [ 692s] [ 98%] Building CXX object examples/cpp-interface/CMakeFiles/spirv-tools-cpp-example.dir/main.cpp.o [ 693s] [100%] Linking CXX executable spirv-tools-cpp-example [ 698s] [100%] Built target spirv-tools-cpp-example [ 698s] + exit 0 [ 698s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.qXecgU [ 698s] + umask 022 [ 698s] + cd /home/abuild/rpmbuild/BUILD [ 698s] + cd spirv-tools-2018.6 [ 698s] + LANG=C [ 698s] + export LANG [ 698s] + unset DISPLAY [ 698s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 [ 698s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 [ 698s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 [ 698s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 install [ 698s] [ 0%] Built target spirv-tools-shared-pkg-config [ 698s] [ 0%] Built target spirv-tools-pkg-config [ 698s] [ 29%] Built target SPIRV-Tools-shared [ 698s] [ 58%] Built target SPIRV-Tools [ 698s] [ 90%] Built target SPIRV-Tools-opt [ 698s] [ 90%] Built target SPIRV-Tools-link [ 698s] [ 91%] Built target spirv-opt [ 698s] [ 91%] Built target spirv-as [ 698s] [ 91%] Built target spirv-dis [ 698s] [ 93%] Built target spirv-stats [ 698s] [ 95%] Built target spirv-val [ 698s] [ 97%] Built target spirv-cfg [ 698s] [ 98%] Built target spirv-link [ 698s] [100%] Built target spirv-tools-cpp-example [ 698s] Install the project... [ 698s] -- Install configuration: "Debug" [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/include/spirv-tools/libspirv.h [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/include/spirv-tools/libspirv.hpp [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/include/spirv-tools/optimizer.hpp [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/include/spirv-tools/linker.hpp [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/include/spirv-tools/instrument.hpp [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/pkgconfig/SPIRV-Tools.pc [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/pkgconfig/SPIRV-Tools-shared.pc [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/libSPIRV-Tools.a [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/libSPIRV-Tools-shared.so [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/libSPIRV-Tools-opt.a [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/libSPIRV-Tools-link.a [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-as [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-dis [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-val [ 698s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-opt [ 699s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-stats [ 699s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-cfg [ 699s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-link [ 699s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-lesspipe.sh [ 699s] + rm -f /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/share/info/dir [ 699s] + find /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 -regex '.*\.la$' [ 699s] + xargs rm -f -- [ 699s] + find /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 -regex '.*\.a$' [ 699s] + xargs rm -f -- [ 699s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64 [ 699s] + cp -a source/libSPIRV-Tools-shared.so source/libSPIRV-Tools.a /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/ [ 699s] + cp -a source/opt/libSPIRV-Tools-opt.a /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/ [ 699s] + cp -a source/link/libSPIRV-Tools-link.a /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/ [ 699s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 2018.6-3.91 --unique-debug-src-base spirv-tools-2018.6-3.91.x86_64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6 [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 1.2354e-05 s, 567 kB/s [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 1.2129e-05 s, 577 kB/s [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 1.0593e-05 s, 661 kB/s [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 1.1382e-05 s, 615 kB/s [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-as [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-dis [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-cfg [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-link [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 2.464e-05 s, 284 kB/s [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-opt [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 1.3307e-05 s, 526 kB/s [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-stats [ 699s] 1+0 records in [ 699s] 1+0 records out [ 699s] 7 bytes (7 B) copied, 2.0248e-05 s, 346 kB/s [ 699s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/bin/spirv-val [ 700s] 1+0 records in [ 700s] 1+0 records out [ 700s] 7 bytes (7 B) copied, 1.3111e-05 s, 534 kB/s [ 700s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/lib64/libSPIRV-Tools-shared.so [ 700s] 0+0 records in [ 700s] 0+0 records out [ 700s] 0 bytes (0 B) copied, 8.847e-06 s, 0.0 kB/s [ 701s] 0+0 records in [ 701s] 0+0 records out [ 701s] 0 bytes (0 B) copied, 1.9082e-05 s, 0.0 kB/s [ 701s] 0+0 records in [ 701s] 0+0 records out [ 701s] 0 bytes (0 B) copied, 9.785e-06 s, 0.0 kB/s [ 704s] 0+0 records in [ 704s] 0+0 records out [ 704s] 0 bytes (0 B) copied, 1.8146e-05 s, 0.0 kB/s [ 704s] 6742 blocks [ 704s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6/spirv-tools-debuginfo.manifest [ 704s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/spirv-tools-2018.6/spirv-tools-debugsource.manifest [ 704s] + /usr/lib/rpm/check-buildroot [ 705s] + /usr/lib/rpm//brp-compress [ 705s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 706s] + /usr/lib/rpm/brp-python-hardlink [ 706s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 [ 706s] Processing files: spirv-tools-2018.6-3.91.x86_64 [ 706s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 706s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 706s] [ 706s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.siCqoS [ 706s] + umask 022 [ 706s] + cd /home/abuild/rpmbuild/BUILD [ 706s] + cd spirv-tools-2018.6 [ 706s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/share/licenses/spirv-tools [ 706s] + export LC_ALL=C [ 706s] + LC_ALL=C [ 706s] + export LICENSEDIR [ 706s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/share/licenses/spirv-tools [ 706s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64/usr/share/licenses/spirv-tools [ 706s] + exit 0 [ 706s] warning: File listed twice: /usr/lib64/libSPIRV-Tools-link.a [ 706s] warning: File listed twice: /usr/lib64/libSPIRV-Tools-opt.a [ 706s] warning: File listed twice: /usr/lib64/libSPIRV-Tools.a [ 706s] Provides: libSPIRV-Tools-shared.so()(64bit) spirv-tools = 2018.6-3.91 spirv-tools(x86-64) = 2018.6-3.91 [ 706s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 706s] Requires: /bin/bash libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.5)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.14)(64bit) libstdc++.so.6(GLIBCXX_3.4.15)(64bit) libstdc++.so.6(GLIBCXX_3.4.18)(64bit) libstdc++.so.6(GLIBCXX_3.4.20)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.26)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 706s] Processing files: spirv-tools-debugsource-2018.6-3.91.x86_64 [ 706s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 706s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 706s] [ 706s] Provides: spirv-tools-debugsource = 2018.6-3.91 spirv-tools-debugsource(x86-64) = 2018.6-3.91 [ 706s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 706s] Processing files: spirv-tools-devel-2018.6-3.91.x86_64 [ 706s] Provides: pkgconfig(SPIRV-Tools) = 2018.7.0 pkgconfig(SPIRV-Tools-shared) = 2018.7.0 spirv-tools-devel = 2018.6-3.91 spirv-tools-devel(x86-64) = 2018.6-3.91 [ 706s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 706s] Requires: /usr/bin/pkg-config [ 706s] Processing files: spirv-tools-debuginfo-2018.6-3.91.x86_64 [ 706s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 706s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 706s] [ 708s] Provides: spirv-tools-debuginfo = 2018.6-3.91 spirv-tools-debuginfo(x86-64) = 2018.6-3.91 [ 708s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 708s] Recommends: spirv-tools-debugsource(x86-64) = 2018.6-3.91 [ 708s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 [ 708s] Wrote: /home/abuild/rpmbuild/SRPMS/spirv-tools-2018.6-3.91.src.rpm [ 714s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-2018.6-3.91.x86_64.rpm [ 715s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-debugsource-2018.6-3.91.x86_64.rpm [ 715s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-devel-2018.6-3.91.x86_64.rpm [ 727s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-debuginfo-2018.6-3.91.x86_64.rpm [ 727s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3FGnBU [ 727s] + umask 022 [ 727s] + cd /home/abuild/rpmbuild/BUILD [ 727s] + cd spirv-tools-2018.6 [ 727s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/spirv-tools-2018.6-3.91.x86_64 [ 727s] + exit 0 [ 727s] ... checking for files with abuild user/group [ 727s] ... creating baselibs [ 727s] ... comparing built packages with the former built [ 727s] /usr/lib/build/pkg-diff.sh [ 727s] compare /.build.oldpackages/spirv-tools-2018.6-3.90.src.rpm /home/abuild/rpmbuild/SRPMS/spirv-tools-2018.6-3.91.src.rpm [ 727s] This is not a prerelease project. Compare the project name. [ 727s] comparing rpmtags [ 727s] comparing RELEASE [ 727s] comparing PROVIDES [ 727s] comparing scripts [ 727s] comparing filelist [ 727s] comparing file checksum [ 727s] RPM meta information is identical [ 728s] compare /.build.oldpackages/spirv-tools-2018.6-3.90.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-2018.6-3.91.x86_64.rpm [ 728s] Comparing spirv-tools-2018.6-3.90.x86_64.rpm to spirv-tools-2018.6-3.91.x86_64.rpm [ 728s] This is not a prerelease project. Compare the project name. [ 728s] comparing rpmtags [ 728s] comparing RELEASE [ 728s] comparing PROVIDES [ 728s] comparing scripts [ 728s] comparing filelist [ 728s] comparing file checksum [ 728s] creating rename script [ 728s] RPM file checksum differs. [ 728s] Extracting packages [ 729s] /usr/bin/spirv-as: only difference was in build-id or gnu_debuglink, GOOD. [ 729s] /usr/bin/spirv-cfg: only difference was in build-id or gnu_debuglink, GOOD. [ 730s] /usr/bin/spirv-dis: only difference was in build-id or gnu_debuglink, GOOD. [ 734s] /usr/bin/spirv-link: only difference was in build-id or gnu_debuglink, GOOD. [ 741s] /usr/bin/spirv-opt: only difference was in build-id or gnu_debuglink, GOOD. [ 743s] /usr/bin/spirv-stats: only difference was in build-id or gnu_debuglink, GOOD. [ 745s] /usr/bin/spirv-val: only difference was in build-id or gnu_debuglink, GOOD. [ 745s] /usr/lib64/linker.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 746s] /usr/lib64/aggressive_dead_code_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 747s] /usr/lib64/basic_block.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 747s] /usr/lib64/block_merge_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 748s] /usr/lib64/build_module.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 748s] /usr/lib64/ccp_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 748s] /usr/lib64/cfg_cleanup_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 749s] /usr/lib64/cfg.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 750s] /usr/lib64/combine_access_chains.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 750s] /usr/lib64/common_uniform_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 751s] /usr/lib64/compact_ids_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 751s] /usr/lib64/composite.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 751s] /usr/lib64/const_folding_rules.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 752s] /usr/lib64/constants.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 754s] /usr/lib64/copy_prop_arrays.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 754s] /usr/lib64/dead_branch_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 755s] /usr/lib64/dead_insert_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 755s] /usr/lib64/dead_variable_elimination.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 755s] /usr/lib64/decoration_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 756s] /usr/lib64/def_use_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 756s] /usr/lib64/dominator_analysis.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 756s] /usr/lib64/dominator_tree.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 757s] /usr/lib64/eliminate_dead_constant_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 757s] /usr/lib64/eliminate_dead_functions_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 757s] /usr/lib64/feature_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 758s] /usr/lib64/flatten_decoration_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 758s] /usr/lib64/fold.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 759s] /usr/lib64/folding_rules.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 760s] /usr/lib64/fold_spec_constant_op_and_composite_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 760s] /usr/lib64/freeze_spec_constant_value_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 760s] /usr/lib64/function.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 761s] /usr/lib64/if_conversion.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 762s] /usr/lib64/inline_exhaustive_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 762s] /usr/lib64/inline_opaque_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 763s] /usr/lib64/inline_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 764s] /usr/lib64/inst_bindless_check_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 765s] /usr/lib64/instruction.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 765s] /usr/lib64/instruction_list.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 768s] /usr/lib64/instrument_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 770s] /usr/lib64/ir_context.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 770s] /usr/lib64/ir_loader.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 770s] /usr/lib64/licm_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 771s] /usr/lib64/local_access_chain_convert_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 771s] /usr/lib64/local_redundancy_elimination.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 772s] /usr/lib64/local_single_block_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 772s] /usr/lib64/local_single_store_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 772s] /usr/lib64/local_ssa_elim_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 773s] /usr/lib64/loop_dependence.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 774s] /usr/lib64/loop_dependence_helpers.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 775s] /usr/lib64/loop_descriptor.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 775s] /usr/lib64/loop_fission.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 776s] /usr/lib64/loop_fusion.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 777s] /usr/lib64/loop_fusion_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 779s] /usr/lib64/loop_peeling.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 780s] /usr/lib64/loop_utils.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 782s] /usr/lib64/loop_unroller.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 784s] /usr/lib64/loop_unswitch_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 785s] /usr/lib64/mem_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 787s] /usr/lib64/merge_return_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 787s] /usr/lib64/module.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 788s] /usr/lib64/optimizer.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 788s] /usr/lib64/pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 788s] /usr/lib64/pass_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 788s] /usr/lib64/private_to_local_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 789s] /usr/lib64/propagator.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 790s] /usr/lib64/reduce_load_size.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 790s] /usr/lib64/redundancy_elimination.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 791s] /usr/lib64/register_pressure.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 791s] /usr/lib64/remove_duplicates_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 792s] /usr/lib64/replace_invalid_opc.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 793s] /usr/lib64/scalar_analysis.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 793s] /usr/lib64/scalar_analysis_simplification.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 794s] /usr/lib64/scalar_replacement_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 794s] /usr/lib64/set_spec_constant_default_value_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 794s] /usr/lib64/simplification_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 795s] /usr/lib64/ssa_rewrite_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 796s] /usr/lib64/strength_reduction_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 796s] /usr/lib64/strip_debug_info_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 796s] /usr/lib64/strip_reflect_info_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 797s] /usr/lib64/struct_cfg_analysis.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 799s] /usr/lib64/type_manager.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 802s] /usr/lib64/types.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 802s] /usr/lib64/unify_const_pass.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 802s] /usr/lib64/value_number_table.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 802s] /usr/lib64/vector_dce.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 803s] /usr/lib64/workaround1209.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 805s] /usr/lib64/libSPIRV-Tools-shared.so: only difference was in build-id or gnu_debuglink, GOOD. [ 805s] /usr/lib64/bit_vector.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 805s] /usr/lib64/parse_number.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/string_utils.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/assembly_grammar.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/binary.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/diagnostic.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/disassemble.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/enum_string_mapping.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/ext_inst.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/extensions.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/id_descriptor.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 806s] /usr/lib64/libspirv.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/name_mapper.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/opcode.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/operand.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/parsed_operand.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/print.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/software_version.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/spirv_endian.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/spirv_optimizer_options.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/spirv_target_env.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/spirv_validator_options.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/table.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 807s] /usr/lib64/text.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/text_handler.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate_adjacency.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate_annotation.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate_arithmetics.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate_atomics.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate_barriers.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 808s] /usr/lib64/validate_bitwise.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 809s] /usr/lib64/validate_builtins.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 809s] /usr/lib64/validate_capability.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_cfg.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_composites.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_constants.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_conversion.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_datarules.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_debug.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_decorations.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_derivatives.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_ext_inst.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 810s] /usr/lib64/validate_execution_limitations.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_function.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_id.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_image.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_interfaces.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_instruction.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_layout.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_literals.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_logicals.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 811s] /usr/lib64/validate_memory.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/validate_mode_setting.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/validate_non_uniform.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/validate_primitives.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/validate_type.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/basic_block.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/construct.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/function.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 812s] /usr/lib64/instruction.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 813s] /usr/lib64/validation_state.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 813s] /usr/lib64/timer.cpp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 813s] Package content is identical [ 813s] compare /.build.oldpackages/spirv-tools-debuginfo-2018.6-3.90.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-debuginfo-2018.6-3.91.x86_64.rpm [ 813s] skipping -debuginfo package [ 813s] compare /.build.oldpackages/spirv-tools-debugsource-2018.6-3.90.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-debugsource-2018.6-3.91.x86_64.rpm [ 813s] Comparing spirv-tools-debugsource-2018.6-3.90.x86_64.rpm to spirv-tools-debugsource-2018.6-3.91.x86_64.rpm [ 813s] This is not a prerelease project. Compare the project name. [ 813s] comparing rpmtags [ 813s] comparing RELEASE [ 813s] comparing PROVIDES [ 813s] comparing scripts [ 813s] comparing filelist [ 813s] comparing file checksum [ 813s] creating rename script [ 813s] RPM meta information is identical [ 813s] compare /.build.oldpackages/spirv-tools-devel-2018.6-3.90.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/spirv-tools-devel-2018.6-3.91.x86_64.rpm [ 813s] Comparing spirv-tools-devel-2018.6-3.90.x86_64.rpm to spirv-tools-devel-2018.6-3.91.x86_64.rpm [ 813s] This is not a prerelease project. Compare the project name. [ 813s] comparing rpmtags [ 813s] comparing RELEASE [ 813s] comparing PROVIDES [ 813s] comparing scripts [ 813s] comparing filelist [ 813s] comparing file checksum [ 813s] creating rename script [ 813s] RPM meta information is identical [ 813s] compare validated built as identical ! [ 813s] [ 813s] obsnw07 finished "build spirv-tools.spec" at Mon May 3 15:32:10 UTC 2021. [ 813s]