[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw05 started "build _service:gbs:libtbm-sprd.spec" at Mon Jun 7 12:53:17 UTC 2021. [ 0s] [ 0s] Building libtbm-sprd for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '3544a4f562abe47f616dd0799173694a' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:libtbm-sprd.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:libtbm-sprd.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:libtbm-sprd.spec build rpmlint-Factory ... [ 0s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling libzstd1... [ 2s] [8/41] preinstalling bash... [ 2s] [9/41] preinstalling diffutils... [ 2s] [10/41] preinstalling grep... [ 2s] [11/41] preinstalling libattr... [ 2s] [12/41] preinstalling libblkid... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 3s] [16/41] preinstalling liblua... [ 3s] [17/41] preinstalling liblzma... [ 3s] [18/41] preinstalling libpopt... [ 3s] [19/41] preinstalling libreadline... [ 3s] [20/41] preinstalling libsmack... [ 3s] [21/41] preinstalling libsqlite... [ 3s] [22/41] preinstalling libuuid... [ 3s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 9s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 11s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-armv7l postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: gio-branding-upstream -> libgio [ 11s] breaking dependency libgio -> gio-branding-upstream [ 11s] cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 13s] [1/131] installing dlog-config-persistent-logs-6.5.8-115.3 [ 13s] [2/131] installing kernel-headers-3.10-sc7730-Tizen_sc7730-41.20 [ 13s] [3/131] installing libmagic-data-5.39-4.131 [ 14s] [4/131] installing setup-0.9-4.34 [ 14s] warning: /etc/profile created as /etc/profile.rpmnew [ 14s] [5/131] installing filesystem-3.1-3.3 [ 14s] [6/131] installing glibc-2.30-8.2 [ 15s] [7/131] installing glibc-devel-2.30-8.2 [ 16s] [8/131] installing libatomic-9.2.0-9.21 [ 16s] [9/131] installing libgcc-9.2.0-9.21 [ 17s] [10/131] installing libzstd1-1.4.5-1.108 [ 17s] [11/131] installing bash-3.2.57-4.4 [ 17s] [12/131] installing capi-base-common-0.4.61-45.1 [ 18s] [13/131] installing cpio-2.8-5.2 [ 18s] [14/131] installing diffutils-3.3-4.2 [ 18s] [15/131] installing findutils-4.3.8-4.38 [ 18s] [16/131] installing gdbm-1.8.3-3.232 [ 18s] [17/131] installing hostname-3.23-3.2 [ 18s] [18/131] installing libattr-2.4.48-4.153 [ 19s] [19/131] installing libblkid-2.36-7.27 [ 19s] [20/131] installing libbz2-1.0.8-4.169 [ 20s] [21/131] installing libcap-2.24-3.213 [ 20s] [22/131] installing libdrm-2.4.103-26.3 [ 20s] [23/131] installing libext2fs-1.46.0-4.13 [ 21s] [24/131] installing libffi-3.3-4.157 [ 21s] [25/131] installing libfreebl3-3.34.1-3.170 [ 22s] [26/131] installing libgfortran-9.2.0-9.21 [ 22s] [27/131] installing libgomp-9.2.0-9.21 [ 23s] [28/131] installing libitm-9.2.0-9.21 [ 23s] [29/131] installing libjson-0.15-12.4 [ 23s] [30/131] installing libltdl-2.4.2-3.181 [ 24s] [31/131] installing liblua-5.1.5-3.147 [ 25s] [32/131] installing liblzma-5.2.5-4.90 [ 25s] [33/131] installing libopenssl11-1.1.1k-5.18 [ 26s] [34/131] installing libpcre-8.44-4.24 [ 26s] [35/131] installing libpopt-1.16-3.211 [ 27s] [36/131] installing libsmack-1.3.1-3.207 [ 27s] [37/131] installing libsmartcols-2.36-7.27 [ 27s] [38/131] installing libsqlite-3.33.0-4.137 [ 28s] [39/131] installing libstdc++-9.2.0-9.21 [ 28s] [40/131] installing libuuid-2.36-7.27 [ 29s] [41/131] installing m4-1.4.17-3.2 [ 29s] [42/131] installing net-tools-2.0_20121208git-4.3 [ 29s] [43/131] installing nspr-4.12-3.212 [ 30s] [44/131] installing patch-2.7-6.36 [ 30s] [45/131] installing pixman-0.38.4-4.9 [ 31s] [46/131] installing pkg-config-0.28-3.206 [ 31s] [47/131] installing sed-4.1c-4.1 [ 32s] [48/131] installing update-alternatives-1.20.5-3.3 [ 32s] [49/131] installing which-2.17-4.3 [ 32s] [50/131] installing zlib-1.2.11-3.219 [ 34s] [51/131] installing shadow-utils-4.1.4.2-1.61 [ 40s] [52/131] installing build-compare-2015.04.28-3.83 [ 40s] [53/131] installing libstdc++-devel-9.2.0-9.21 [ 42s] [54/131] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 51s] [55/131] installing terminfo-base-full-6.2-5.125 [ 53s] [56/131] installing capi-base-common-devel-0.4.61-45.1 [ 53s] [57/131] installing cpp-9.2.0-9.21 [ 54s] [58/131] installing gcc-c++-9.2.0-9.21 [ 56s] [59/131] installing binutils-2.33.1-9.7 [ 57s] [60/131] installing coreutils-6.9-5.15 [ 59s] [61/131] installing gawk-3.1.5-4.3 [ 61s] [62/131] installing grep-2.5.2-3.3 [ 61s] [63/131] installing libacl-2.2.53-4.152 [ 64s] [64/131] installing libcc1-9.2.0-9.21 [ 65s] [65/131] installing libelf-0.178-3.120 [ 67s] [66/131] installing libglib-2.62.3-30.20 [ 67s] [67/131] installing libkms-2.4.103-26.3 [ 68s] [68/131] installing libmount-2.36-7.27 [ 70s] [69/131] installing libpng-1.6.37-13.4 [ 71s] [70/131] installing libubsan-9.2.0-9.21 [ 72s] [71/131] installing make-4.0-2.61 [ 73s] [72/131] installing nss-certs-3.34.1-3.170 [ 73s] [73/131] installing smack-1.3.1-3.207 [ 74s] [74/131] installing bzip2-1.0.8-4.169 [ 75s] [75/131] installing libfdisk-2.36-7.27 [ 77s] [76/131] installing libkmod-28-11.1 [ 79s] [77/131] installing libmagic-5.39-4.131 [ 82s] [78/131] installing libxml2-2.9.10-5.4 [ 83s] [79/131] installing perl-5.32.0-4.74 [ 87s] [80/131] installing xz-5.2.5-4.90 [ 87s] [81/131] installing dlog-6.5.8-115.3 [ 88s] [82/131] installing build-mkbaselibs-20120927-3.3 [ 88s] [83/131] installing autoconf-2.69-3.132 [ 88s] [84/131] installing dlog-logger-6.5.8-115.3 [ 88s] [85/131] installing file-5.39-4.131 [ 88s] [86/131] installing glibc-locale-2.30-8.2 [ 89s] [87/131] installing libdrm-devel-2.4.103-26.3 [ 89s] [88/131] installing libgmodule-2.62.3-30.20 [ 89s] [89/131] installing tar-1.17-3.1 [ 89s] [90/131] installing tizen-platform-config-5.0-15.4 [ 91s] [91/131] installing gzip-1.3.12-3.212 [ 91s] [92/131] installing libgobject-2.62.3-30.20 [ 92s] [93/131] installing libncurses6-6.2-5.125 [ 92s] [94/131] installing pam-1.1.6-3.3 [ 93s] [95/131] installing tzdata-2020a-3.3 [ 93s] [96/131] installing libdw-0.178-3.120 [ 93s] [97/131] installing libarchive-3.5.1-2.30 [ 94s] [98/131] installing shared-mime-info-1.7-5.19 [ 125s] [99/131] installing gcc-9.2.0-9.21 [ 125s] [100/131] installing libncurses-6.2-5.125 [ 126s] [101/131] installing qemu-accel-x86_64-armv7l-0.4-8.3 [ 135s] [102/131] installing automake-1.15.1-3.151 [ 136s] [103/131] installing less-466-3.3 [ 136s] [104/131] installing libreadline-5.2-3.61 [ 137s] [105/131] installing libtzplatform-config-5.0-15.4 [ 138s] [106/131] installing procps-ng-3.3.16-3.3 [ 138s] [107/131] installing libasm-0.178-3.120 [ 138s] [108/131] installing build-20120927-3.3 [ 139s] [109/131] installing libsystemd-244-81.1 [ 139s] [110/131] installing libdlog-6.5.8-115.3 [ 139s] [111/131] installing libdlog-devel-6.5.8-115.3 [ 139s] [112/131] installing libtool-2.4.2-3.181 [ 139s] [113/131] installing libwayland-client-1.18.92-38.2 [ 141s] [114/131] installing libwayland-server-1.18.92-38.2 [ 143s] [115/131] installing elfutils-0.178-3.120 [ 144s] [116/131] installing util-linux-2.36-7.27 [ 145s] [117/131] installing systemd-244-81.1 [ 146s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 146s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 146s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 146s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 146s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 146s] [118/131] installing systemd-devel-244-81.1 [ 146s] [119/131] installing util-linux-su-2.36-7.27 [ 146s] [120/131] installing nss-3.34.1-3.170 [ 147s] [121/131] installing libgio-2.62.3-30.20 [ 147s] [122/131] installing gio-branding-upstream-2.62.3-30.20 [ 147s] [123/131] installing libsoftokn3-3.34.1-3.170 [ 147s] [124/131] installing hal-api-common-0.0.1-20.2 [ 148s] [125/131] installing rpm-4.14.1.1-8.20 [ 148s] [126/131] installing hal-api-common-devel-0.0.1-20.2 [ 148s] [127/131] installing hal-api-tbm-0.0.5-5.1 [ 149s] [128/131] installing rpm-build-4.14.1.1-8.20 [ 149s] [129/131] installing hal-api-tbm-devel-0.0.5-5.1 [ 149s] [130/131] installing libtbm-4.0.2-78.2 [ 149s] [131/131] installing libtbm-devel-4.0.2-78.2 [ 149s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 149s] now finalizing build dir... [ 150s] Running build time source services... [ 150s] build target is armv7l-tizen-linux [ 150s] ----------------------------------------------------------------- [ 150s] I have the following modifications for libtbm-sprd.spec: [ 150s] 4c4 [ 150s] < Release: 0 [ 150s] --- [ 150s] > Release: 16.1 [ 150s] ----------------------------------------------------------------- [ 150s] ----- building libtbm-sprd.spec (user abuild) [ 150s] ----------------------------------------------------------------- [ 150s] ----------------------------------------------------------------- [ 150s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/3544a4f562abe47f616dd0799173694a-libtbm-sprd' -ba /home/abuild/rpmbuild/SOURCES/libtbm-sprd.spec [ 150s] Building target platforms: armv7l-tizen-linux [ 150s] Building for target armv7l-tizen-linux [ 150s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.l5Mxxh [ 150s] + umask 022 [ 150s] + cd /home/abuild/rpmbuild/BUILD [ 150s] + cd /home/abuild/rpmbuild/BUILD [ 150s] + rm -rf libtbm-sprd-3.0.3 [ 150s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libtbm-sprd-3.0.3.tar.gz [ 150s] + /bin/tar -xof - [ 150s] + STATUS=0 [ 150s] + '[' 0 -ne 0 ']' [ 150s] + cd libtbm-sprd-3.0.3 [ 150s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 150s] + cp /home/abuild/rpmbuild/SOURCES/libtbm-sprd.manifest . [ 150s] + cp /home/abuild/rpmbuild/SOURCES/libhal-backend-tbm-sprd.manifest . [ 150s] + exit 0 [ 150s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.m0lbaf [ 150s] + umask 022 [ 150s] + cd /home/abuild/rpmbuild/BUILD [ 150s] + cd libtbm-sprd-3.0.3 [ 150s] ++ uname -m [ 150s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 150s] + LANG=C [ 150s] + export LANG [ 150s] + unset DISPLAY [ 150s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 150s] + export CFLAGS [ 150s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 150s] + export CXXFLAGS [ 150s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 150s] + export FFLAGS [ 150s] + LDFLAGS= [ 150s] + export LDFLAGS [ 150s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 150s] + export CFLAGS [ 150s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 150s] + export CXXFLAGS [ 150s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 150s] + export FFLAGS [ 150s] + autoreconf -v --install --force [ 153s] autoreconf: Entering directory `.' [ 153s] autoreconf: configure.ac: not using Gettext [ 154s] autoreconf: running: aclocal --force [ 157s] autoreconf: configure.ac: tracing [ 159s] autoreconf: running: libtoolize --copy --force [ 159s] libtoolize: putting auxiliary files in `.'. [ 159s] libtoolize: copying file `./ltmain.sh' [ 159s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 159s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 159s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 163s] autoreconf: running: /usr/bin/autoconf --force [ 166s] autoreconf: running: /usr/bin/autoheader --force [ 168s] autoreconf: running: automake --add-missing --copy --force-missing [ 170s] configure.ac:22: installing './compile' [ 171s] configure.ac:29: installing './config.guess' [ 171s] configure.ac:29: installing './config.sub' [ 171s] configure.ac:24: installing './install-sh' [ 171s] configure.ac:24: installing './missing' [ 171s] Makefile.am: installing './INSTALL' [ 171s] src/libhal-backend-tbm-sprd/Makefile.am: installing './depcomp' [ 172s] autoreconf: Leaving directory `.' [ 172s] ++ pkg-config --cflags dlog [ 172s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --libdir=/usr/lib/bufmgr --with-hal-libdir=/hal/lib 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog ' 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 172s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 172s] checking whether the C compiler works... yes [ 172s] checking for C compiler default output file name... a.out [ 172s] checking for suffix of executables... [ 172s] checking whether we are cross compiling... no [ 172s] checking for suffix of object files... o [ 172s] checking whether we are using the GNU C compiler... yes [ 172s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 173s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 173s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 173s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 173s] checking for grep that handles long lines and -e... /bin/grep [ 173s] checking for egrep... /bin/grep -E [ 173s] checking for ANSI C header files... yes [ 173s] checking for sys/types.h... yes [ 173s] checking for sys/stat.h... yes [ 173s] checking for stdlib.h... yes [ 173s] checking for string.h... yes [ 173s] checking for memory.h... yes [ 173s] checking for strings.h... yes [ 173s] checking for inttypes.h... yes [ 173s] checking for stdint.h... yes [ 173s] checking for unistd.h... yes [ 173s] checking minix/config.h usability... no [ 173s] checking minix/config.h presence... no [ 173s] checking for minix/config.h... no [ 173s] checking whether it is safe to define __EXTENSIONS__... yes [ 173s] checking for a BSD-compatible install... /bin/install -c [ 173s] checking whether build environment is sane... yes [ 173s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 173s] checking for gawk... gawk [ 173s] checking whether make sets $(MAKE)... yes [ 173s] checking for style of include used by make... GNU [ 173s] checking whether make supports nested variables... yes [ 173s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 173s] checking build system type... armv7l-tizen-linux-gnueabi [ 173s] checking host system type... armv7l-tizen-linux-gnueabi [ 173s] checking how to print strings... printf [ 173s] checking for a sed that does not truncate output... /bin/sed [ 173s] checking for fgrep... /bin/grep -F [ 173s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 173s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 173s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 173s] checking the name lister (/bin/nm -B) interface... BSD nm [ 173s] checking whether ln -s works... yes [ 173s] checking the maximum length of command line arguments... 1572864 [ 173s] checking whether the shell understands some XSI constructs... yes [ 173s] checking whether the shell understands "+="... yes [ 173s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 173s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 173s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 173s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 173s] checking for objdump... objdump [ 173s] checking how to recognize dependent libraries... pass_all [ 173s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 173s] checking for dlltool... no [ 173s] checking how to associate runtime and link libraries... printf %s\n [ 173s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 173s] checking for ar... ar [ 173s] checking for archiver @FILE support... @ [ 173s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 173s] checking for strip... strip [ 173s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 173s] checking for ranlib... ranlib [ 174s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 174s] checking for sysroot... no [ 174s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 174s] checking for mt... no [ 174s] checking if : is a manifest tool... no [ 174s] checking for dlfcn.h... yes [ 174s] checking for objdir... .libs [ 174s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 174s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 174s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 174s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 174s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 174s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 174s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 174s] checking whether -lc should be explicitly linked in... no [ 174s] checking dynamic linker characteristics... GNU/Linux ld.so [ 174s] checking how to hardcode library paths into programs... immediate [ 174s] checking whether stripping libraries is possible... yes [ 174s] checking if libtool supports shared libraries... yes [ 174s] checking whether to build shared libraries... yes [ 174s] checking whether to build static libraries... no [ 174s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 174s] checking whether we are using the GNU C compiler... (cached) yes [ 174s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 174s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 174s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 174s] checking for ANSI C header files... (cached) yes [ 174s] checking for special C compiler options needed for large files... no [ 174s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 174s] checking for size_t... yes [ 174s] checking for working alloca.h... yes [ 174s] checking for alloca... yes [ 174s] checking whether make supports nested variables... (cached) yes [ 174s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 174s] checking pkg-config is at least version 0.9.0... yes [ 174s] checking for LIBDRM... yes [ 174s] checking for LIBTBM... yes [ 174s] checking for HAL_API_COMMON... yes [ 175s] checking for HAL_API_TBM... yes [ 175s] checking for LIBDLOG... yes [ 175s] checking for CAPI... yes [ 175s] checking for LIBUDEV... yes [ 175s] checking that generated files are newer than configure... done [ 175s] configure: creating ./config.status [ 176s] config.status: creating Makefile [ 176s] config.status: creating src/libtbm-sprd/Makefile [ 176s] config.status: creating src/libhal-backend-tbm-sprd/Makefile [ 176s] config.status: creating src/Makefile [ 176s] config.status: creating config.h [ 176s] config.status: executing depfiles commands [ 176s] config.status: executing libtool commands [ 176s] [ 176s] CFLAGS : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror -I/usr/include/dlog [ 176s] LDFLAGS : -Wl,--hash-style=both -Wl,--as-needed [ 176s] LIBTBM_SPRD_CFLAGS : -I/usr/include/libdrm -I/usr/include/dlog [ 176s] LIBTBM_SPRD_LIBS : -ldrm -ltbm -lcapi-base-common -ldlog -ludev [ 176s] bufmgr_dir : usr/lib/bufmgr [ 176s] LIBHAL_BACKEND_TBM_SPRD_CFLAGS : -I/usr/include/hal -I/usr/include/hal -I/usr/include/libdrm [ 176s] LIBHAL_BACKEND_TBM_SPRD_LIBS : -L/usr/lib/hal -lhal-api-common -L/usr/lib//hal -lhal-api-tbm -ldrm -lcapi-base-common -ludev [ 176s] hal-libdir : /hal/lib [ 176s] [ 176s] + make -j4 [ 176s] make all-recursive [ 176s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 176s] Making all in src [ 176s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 176s] Making all in libtbm-sprd [ 176s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libtbm-sprd' [ 176s] CC tbm_bufmgr_sprd.lo [ 177s] CCLD libtbm_sprd.la [ 177s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libtbm-sprd' [ 177s] Making all in libhal-backend-tbm-sprd [ 177s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libhal-backend-tbm-sprd' [ 177s] CC tbm_backend_log.lo [ 177s] CC tbm_backend_sprd.lo [ 177s] CCLD libhal-backend-tbm-sprd.la [ 177s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libhal-backend-tbm-sprd' [ 177s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 177s] make[3]: Nothing to be done for 'all-am'. [ 177s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 177s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 177s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 177s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 177s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 177s] + exit 0 [ 177s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.W8TUMg [ 177s] + umask 022 [ 177s] + cd /home/abuild/rpmbuild/BUILD [ 177s] + cd libtbm-sprd-3.0.3 [ 177s] + LANG=C [ 177s] + export LANG [ 177s] + unset DISPLAY [ 177s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm [ 177s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm [ 177s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm [ 177s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm install [ 177s] Making install in src [ 177s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 177s] Making install in libtbm-sprd [ 177s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libtbm-sprd' [ 177s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libtbm-sprd' [ 177s] make[3]: Nothing to be done for 'install-exec-am'. [ 177s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr' [ 177s] /bin/sh ../../libtool --mode=install /bin/install -c libtbm_sprd.la '/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr' [ 177s] libtool: install: /bin/install -c .libs/libtbm_sprd.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr/libtbm_sprd.so.0.0.0 [ 177s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr && { ln -s -f libtbm_sprd.so.0.0.0 libtbm_sprd.so.0 || { rm -f libtbm_sprd.so.0 && ln -s libtbm_sprd.so.0.0.0 libtbm_sprd.so.0; }; }) [ 177s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr && { ln -s -f libtbm_sprd.so.0.0.0 libtbm_sprd.so || { rm -f libtbm_sprd.so && ln -s libtbm_sprd.so.0.0.0 libtbm_sprd.so; }; }) [ 177s] libtool: install: /bin/install -c .libs/libtbm_sprd.lai /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr/libtbm_sprd.la [ 177s] libtool: install: warning: remember to run `libtool --finish /usr/lib/bufmgr' [ 177s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libtbm-sprd' [ 177s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libtbm-sprd' [ 177s] Making install in libhal-backend-tbm-sprd [ 177s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libhal-backend-tbm-sprd' [ 177s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libhal-backend-tbm-sprd' [ 177s] make[3]: Nothing to be done for 'install-exec-am'. [ 177s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib' [ 177s] /bin/sh ../../libtool --mode=install /bin/install -c libhal-backend-tbm-sprd.la '/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib' [ 177s] libtool: install: /bin/install -c .libs/libhal-backend-tbm-sprd.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib/libhal-backend-tbm-sprd.so.0.0.0 [ 177s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib && { ln -s -f libhal-backend-tbm-sprd.so.0.0.0 libhal-backend-tbm-sprd.so.0 || { rm -f libhal-backend-tbm-sprd.so.0 && ln -s libhal-backend-tbm-sprd.so.0.0.0 libhal-backend-tbm-sprd.so.0; }; }) [ 178s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib && { ln -s -f libhal-backend-tbm-sprd.so.0.0.0 libhal-backend-tbm-sprd.so || { rm -f libhal-backend-tbm-sprd.so && ln -s libhal-backend-tbm-sprd.so.0.0.0 libhal-backend-tbm-sprd.so; }; }) [ 178s] libtool: install: /bin/install -c .libs/libhal-backend-tbm-sprd.lai /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib/libhal-backend-tbm-sprd.la [ 178s] libtool: install: warning: remember to run `libtool --finish /hal/lib' [ 178s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libhal-backend-tbm-sprd' [ 178s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src/libhal-backend-tbm-sprd' [ 178s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 178s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 178s] make[3]: Nothing to be done for 'install-exec-am'. [ 178s] make[3]: Nothing to be done for 'install-data-am'. [ 178s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 178s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 178s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/src' [ 178s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 178s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 178s] make[2]: Nothing to be done for 'install-exec-am'. [ 178s] make[2]: Nothing to be done for 'install-data-am'. [ 178s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 178s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3' [ 178s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/share/info/dir [ 178s] + find /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm -regex '.*\.la$' [ 178s] + xargs rm -f -- [ 178s] + find /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm -regex '.*\.a$' [ 178s] + xargs rm -f -- [ 178s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/udev/rules.d/ [ 178s] + cp -af rules/99-libtbm_sprd.rules /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/udev/rules.d/ [ 178s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib/udev/rules.d/ [ 178s] + cp -af rules/99-libhal-backend-tbm-sprd.rules /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib/udev/rules.d/ [ 178s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/share/licenses/libhal-backend-tbm-sprd [ 178s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/share/licenses/libhal-backend-tbm-sprd [ 178s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 3.0.3-16.1 --unique-debug-src-base libtbm-sprd-3.0.3-16.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3 [ 178s] 1+0 records in [ 178s] 1+0 records out [ 178s] 1+0 records in [ 178s] 1+0 records out [ 178s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000880757 s, 7.9 kB/s [ 178s] , 0.00088065 s, 7.9 kB/s [ 178s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/lib/bufmgr/libtbm_sprd.so.0.0.0 [ 178s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/hal/lib/libhal-backend-tbm-sprd.so.0.0.0 [ 178s] 0+0 records in [ 178s] 0+0 records out [ 178s] 0 bytes (0 B) copied, 0.00064844 s, 0.0 kB/s [ 178s] 0+0 records in [ 178s] 0+0 records out [ 178s] 0 bytes (0 B) copied, 0.000361639 s, 0.0 kB/s [ 178s] 198 blocks [ 178s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/libtbm-sprd-debuginfo.manifest [ 178s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libtbm-sprd-3.0.3/libtbm-sprd-debugsource.manifest [ 178s] + /usr/lib/rpm/check-buildroot [ 178s] + /usr/lib/rpm//brp-compress [ 178s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 178s] + /usr/lib/rpm/brp-python-hardlink [ 178s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm [ 178s] Processing files: libtbm-sprd-3.0.3-16.1.armv7l [ 178s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 178s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 178s] [ 178s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.EoNkAe [ 178s] + umask 022 [ 178s] + cd /home/abuild/rpmbuild/BUILD [ 178s] + cd libtbm-sprd-3.0.3 [ 178s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/share/licenses/libtbm-sprd [ 178s] + export LC_ALL=C [ 178s] + LC_ALL=C [ 178s] + export LICENSEDIR [ 178s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/share/licenses/libtbm-sprd [ 178s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm/usr/share/licenses/libtbm-sprd [ 178s] + exit 0 [ 178s] Provides: libtbm-sprd = 3.0.3-16.1 libtbm-sprd(armv7l-32) = 3.0.3-16.1 libtbm_sprd.so.0 [ 178s] Requires(interp): /bin/sh /sbin/ldconfig [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Requires(post): /bin/sh [ 178s] Requires(postun): /sbin/ldconfig [ 178s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libdrm.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libtbm.so.1 libtbm_sprd.so.0 libudev.so.1 libudev.so.1(LIBUDEV_183) [ 178s] Processing files: libtbm-sprd-debugsource-3.0.3-16.1.armv7l [ 178s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 178s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 178s] [ 178s] Provides: libtbm-sprd-debugsource = 3.0.3-16.1 libtbm-sprd-debugsource(armv7l-32) = 3.0.3-16.1 [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Processing files: hal-backend-tbm-sprd-3.0.3-16.1.armv7l [ 178s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 178s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 178s] [ 178s] Provides: hal-backend-tbm-sprd = 3.0.3-16.1 hal-backend-tbm-sprd(armv7l-32) = 3.0.3-16.1 libhal-backend-tbm-sprd.so.0 [ 178s] Requires(interp): /bin/sh /sbin/ldconfig [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Requires(post): /bin/sh [ 178s] Requires(postun): /sbin/ldconfig [ 178s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libdrm.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libhal-backend-tbm-sprd.so.0 libudev.so.1 libudev.so.1(LIBUDEV_183) [ 178s] Processing files: libtbm-sprd-debuginfo-3.0.3-16.1.armv7l [ 178s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 178s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 178s] [ 178s] Provides: libtbm-sprd-debuginfo = 3.0.3-16.1 libtbm-sprd-debuginfo(armv7l-32) = 3.0.3-16.1 [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Recommends: libtbm-sprd-debugsource(armv7l-32) = 3.0.3-16.1 [ 178s] Processing files: hal-backend-tbm-sprd-debuginfo-3.0.3-16.1.armv7l [ 178s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 178s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 178s] [ 178s] Provides: hal-backend-tbm-sprd-debuginfo = 3.0.3-16.1 hal-backend-tbm-sprd-debuginfo(armv7l-32) = 3.0.3-16.1 [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Recommends: libtbm-sprd-debugsource(armv7l-32) = 3.0.3-16.1 [ 178s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm [ 178s] Wrote: /home/abuild/rpmbuild/SRPMS/libtbm-sprd-3.0.3-16.1.src.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-sprd-3.0.3-16.1.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-sprd-debugsource-3.0.3-16.1.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-tbm-sprd-3.0.3-16.1.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libtbm-sprd-debuginfo-3.0.3-16.1.armv7l.rpm [ 178s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-tbm-sprd-debuginfo-3.0.3-16.1.armv7l.rpm [ 178s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.U6HGRh [ 178s] + umask 022 [ 178s] + cd /home/abuild/rpmbuild/BUILD [ 178s] + cd libtbm-sprd-3.0.3 [ 178s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libtbm-sprd-3.0.3-16.1.arm [ 178s] + exit 0 [ 178s] ... checking for files with abuild user/group [ 178s] ... creating baselibs [ 179s] ... comparing built packages with the former built [ 179s] /usr/lib/build/pkg-diff.sh [ 179s] compare /.build.oldpackages/libtbm-sprd-3.0.2-15.2.src.rpm /home/abuild/rpmbuild/SRPMS/libtbm-sprd-3.0.3-16.1.src.rpm [ 179s] This is not a prerelease project. Compare the project name. [ 179s] comparing rpmtags [ 179s] comparing RELEASE [ 179s] comparing PROVIDES [ 179s] comparing scripts [ 179s] comparing filelist [ 179s] comparing file checksum [ 179s] RPM meta information is identical [ 179s] compare /.build.oldpackages/hal-backend-tbm-sprd-3.0.2-15.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-tbm-sprd-3.0.3-16.1.armv7l.rpm [ 179s] Comparing hal-backend-tbm-sprd-3.0.2-15.2.armv7l.rpm to hal-backend-tbm-sprd-3.0.3-16.1.armv7l.rpm [ 180s] This is not a prerelease project. Compare the project name. [ 180s] comparing rpmtags [ 180s] --- /tmp/tmp.DcXZu48064/tmp.WXfuW48101 2021-06-07 12:56:17.048026250 +0000 [ 180s] +++ /tmp/tmp.DcXZu48064/tmp.FhxdR48110 2021-06-07 12:56:17.052026040 +0000 [ 180s] @@ -1,4 +1,4 @@ [ 180s] -hal-backend-tbm-sprd 3.0.2 (none) [ 180s] +hal-backend-tbm-sprd 3.0.3 (none) [ 180s] hal-backend-tbm module for spreadtrum [ 180s] descriptionion: hal tbm backend module for sprd [ 180s] tizen [ 180s] @@ -8,4 +8,4 @@ [ 180s] cpio xz 5T [ 180s] [ 180s] (none) (none) (none) [ 180s] -obs://build.tizen.org/Tizen:Unified/standard/e90982938b5363ad96f176bab8ab4018-libtbm-sprd Tizen:Unified [ 180s] +obs://build.tizen.org/Tizen:Unified/standard/3544a4f562abe47f616dd0799173694a-libtbm-sprd Tizen:Unified [ 180s] RPM meta information is different [ 180s] compare /.build.oldpackages/hal-backend-tbm-sprd-debuginfo-3.0.2-15.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-tbm-sprd-debuginfo-3.0.3-16.1.armv7l.rpm [ 180s] skipping -debuginfo package [ 180s] compare /.build.oldpackages/libtbm-sprd-3.0.2-15.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libtbm-sprd-3.0.3-16.1.armv7l.rpm [ 180s] Comparing libtbm-sprd-3.0.2-15.2.armv7l.rpm to libtbm-sprd-3.0.3-16.1.armv7l.rpm [ 180s] This is not a prerelease project. Compare the project name. [ 180s] comparing rpmtags [ 180s] --- /tmp/tmp.xiZKy48156/tmp.rzueF48228 2021-06-07 12:56:17.240016134 +0000 [ 180s] +++ /tmp/tmp.xiZKy48156/tmp.oMiWb48235 2021-06-07 12:56:17.248015712 +0000 [ 180s] @@ -1,4 +1,4 @@ [ 180s] -libtbm-sprd 3.0.2 (none) [ 180s] +libtbm-sprd 3.0.3 (none) [ 180s] Tizen Buffer Manager - sprd backend [ 180s] descriptionion:Tizen Buffer manager backend module for spreadtrum [ 180s] tizen [ 180s] @@ -8,4 +8,4 @@ [ 180s] cpio xz 5T [ 180s] [ 180s] (none) (none) (none) [ 180s] -obs://build.tizen.org/Tizen:Unified/standard/e90982938b5363ad96f176bab8ab4018-libtbm-sprd Tizen:Unified [ 180s] +obs://build.tizen.org/Tizen:Unified/standard/3544a4f562abe47f616dd0799173694a-libtbm-sprd Tizen:Unified [ 180s] RPM meta information is different [ 180s] compare /.build.oldpackages/libtbm-sprd-debuginfo-3.0.2-15.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libtbm-sprd-debuginfo-3.0.3-16.1.armv7l.rpm [ 180s] skipping -debuginfo package [ 180s] compare /.build.oldpackages/libtbm-sprd-debugsource-3.0.2-15.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libtbm-sprd-debugsource-3.0.3-16.1.armv7l.rpm [ 180s] Comparing libtbm-sprd-debugsource-3.0.2-15.2.armv7l.rpm to libtbm-sprd-debugsource-3.0.3-16.1.armv7l.rpm [ 180s] This is not a prerelease project. Compare the project name. [ 180s] comparing rpmtags [ 180s] --- /tmp/tmp.AYufN48275/tmp.qPnZX48304 2021-06-07 12:56:17.436005807 +0000 [ 180s] +++ /tmp/tmp.AYufN48275/tmp.LmmFR48318 2021-06-07 12:56:17.440005596 +0000 [ 180s] @@ -1,4 +1,4 @@ [ 180s] -libtbm-sprd-debugsource 3.0.2 (none) [ 180s] +libtbm-sprd-debugsource 3.0.3 (none) [ 180s] Debug sources for package libtbm-sprd [ 180s] This package provides debug sources for package libtbm-sprd. [ 180s] Debug sources are useful when developing applications that use this [ 180s] @@ -10,4 +10,4 @@ [ 180s] cpio xz 5T [ 180s] [ 180s] (none) (none) (none) [ 180s] -obs://build.tizen.org/Tizen:Unified/standard/e90982938b5363ad96f176bab8ab4018-libtbm-sprd Tizen:Unified [ 180s] +obs://build.tizen.org/Tizen:Unified/standard/3544a4f562abe47f616dd0799173694a-libtbm-sprd Tizen:Unified [ 180s] RPM meta information is different [ 180s] [ 180s] obsnw05 finished "build libtbm-sprd.spec" at Mon Jun 7 12:56:17 UTC 2021. [ 180s] Retried build at Fri Jun 11 01:39:43 2021 returned same result, skipped Retried build at Fri Jun 11 15:03:25 2021 returned same result, skipped Retried build at Thu Jun 17 12:53:58 2021 returned same result, skipped Retried build at Tue Jun 22 13:02:53 2021 returned same result, skipped Retried build at Wed Jun 23 13:25:54 2021 returned same result, skipped Retried build at Thu Jun 24 08:06:01 2021 returned same result, skipped Retried build at Thu Jun 24 09:13:41 2021 returned same result, skipped Retried build at Thu Jun 24 11:11:56 2021 returned same result, skipped Retried build at Fri Jun 25 17:15:19 2021 returned same result, skipped Retried build at Mon Jun 28 04:48:20 2021 returned same result, skipped Retried build at Mon Jun 28 08:46:58 2021 returned same result, skipped Retried build at Mon Jun 28 11:19:08 2021 returned same result, skipped Retried build at Tue Jun 29 13:27:38 2021 returned same result, skipped Retried build at Tue Jun 29 13:59:44 2021 returned same result, skipped Retried build at Thu Jul 1 12:39:20 2021 returned same result, skipped Retried build at Mon Jul 5 12:55:36 2021 returned same result, skipped Retried build at Tue Jul 6 08:58:35 2021 returned same result, skipped Retried build at Tue Jul 6 19:12:57 2021 returned same result, skipped Retried build at Tue Jul 6 22:15:25 2021 returned same result, skipped Retried build at Wed Jul 7 07:41:45 2021 returned same result, skipped Retried build at Mon Jul 12 03:07:41 2021 returned same result, skipped Retried build at Mon Jul 12 12:42:23 2021 returned same result, skipped Retried build at Wed Jul 14 01:52:24 2021 returned same result, skipped Retried build at Fri Jul 16 14:10:21 2021 returned same result, skipped Retried build at Fri Jul 16 16:13:55 2021 returned same result, skipped Retried build at Mon Jul 19 02:40:20 2021 returned same result, skipped Retried build at Wed Jul 21 12:50:07 2021 returned same result, skipped Retried build at Fri Jul 23 12:46:37 2021 returned same result, skipped Retried build at Tue Jul 27 12:56:03 2021 returned same result, skipped Retried build at Tue Aug 3 12:54:09 2021 returned same result, skipped Retried build at Wed Aug 4 09:09:00 2021 returned same result, skipped Retried build at Fri Aug 13 03:01:18 2021 returned same result, skipped Retried build at Mon Aug 16 12:42:09 2021 returned same result, skipped Retried build at Fri Aug 20 10:29:47 2021 returned same result, skipped Retried build at Mon Aug 23 07:26:54 2021 returned same result, skipped Retried build at Wed Aug 25 06:10:07 2021 returned same result, skipped Retried build at Fri Aug 27 05:04:53 2021 returned same result, skipped Retried build at Wed Sep 1 11:13:47 2021 returned same result, skipped Retried build at Tue Sep 7 12:28:07 2021 returned same result, skipped Retried build at Wed Sep 8 01:53:44 2021 returned same result, skipped Retried build at Thu Sep 9 12:57:02 2021 returned same result, skipped Retried build at Mon Sep 13 09:24:32 2021 returned same result, skipped Retried build at Mon Sep 13 12:42:46 2021 returned same result, skipped Retried build at Wed Sep 15 10:10:29 2021 returned same result, skipped Retried build at Fri Sep 17 13:24:42 2021 returned same result, skipped Retried build at Fri Sep 24 14:00:01 2021 returned same result, skipped Retried build at Mon Sep 27 12:44:19 2021 returned same result, skipped Retried build at Tue Sep 28 22:00:59 2021 returned same result, skipped