[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w28 started "build _service:gbs:autoconf213.spec" at Fri Dec 9 14:03:37 UTC 2016. [ 0s] [ 0s] Building autoconf213 for project 'Tizen:3.0:Base' repository 'arm' arch 'armv7l' srcmd5 '93590277dfa4ee12a38f5b74b27f9a8e' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:autoconf213.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:autoconf213.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:autoconf213.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling libgcc... [ 0s] [6/40] preinstalling bash... [ 0s] [7/40] preinstalling diffutils... [ 0s] [8/40] preinstalling grep... [ 0s] [9/40] preinstalling libattr... [ 0s] [10/40] preinstalling libbz2... [ 0s] [11/40] preinstalling libcap... [ 0s] [12/40] preinstalling libelf... [ 0s] [13/40] preinstalling libfreebl3... [ 0s] [14/40] preinstalling liblua... [ 0s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 3s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 4s] [26/40] preinstalling coreutils... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling libmount... [ 4s] [35/40] preinstalling tar... [ 4s] [36/40] preinstalling util-linux... [ 4s] [37/40] preinstalling util-linux-su... [ 4s] [38/40] preinstalling nss... [ 4s] [39/40] preinstalling libsoftokn3... [ 4s] [40/40] preinstalling rpm... [ 4s] [ 4s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 5s] [8/9] preinstalling libmount... [ 5s] [9/9] preinstalling util-linux... [ 5s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 20s] booting kvm ... [ 20s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 24s] [ 0.000000] tsc: Fast TSC calibration failed [ 24s] doing fast boot [ 24s] Creating device nodes with udev [ 27s] Waiting for device /dev/vda to appear: ok [ 27s] fsck from util-linux 2.21.2 [ 27s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 28s] /dev/vda: clean, 5017/2392064 files, 262319/9568256 blocks [ 28s] fsck succeeded. Mounting root device read-write. [ 28s] Mounting root /dev/vda [ 28s] mount -o rw -t ext4 /dev/vda /root [ 31s] replacing /etc/mtab with symlink to /proc/self/mounts [ 44s] 2nd stage started in virtual machine [ 44s] machine type: armv7l [ 47s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 47s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 47s] swapon /dev/vdb [ 48s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 49s] mount: none is already mounted or /proc busy [ 49s] mount: none is already mounted or /dev/pts busy [ 49s] logging output to //.build.log... [ 51s] processing specfile /.build-srcdir/_service:gbs:autoconf213.spec ... [ 52s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:autoconf213.spec build rpmlint-Factory ... [ 66s] running qemu-linux-user-x86_64-cross postinstall script [ 70s] running qemu-accel-x86_64-armv7l postinstall script [ 71s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 71s] running setup postinstall script [ 71s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 71s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 71s] initializing rpm db... [ 83s] [1/93] installing libmagic-data-5.28-2.1 [ 83s] [2/93] installing setup-0.9-1.1 [ 84s] [3/93] installing terminfo-base-5.9-1.1 [ 84s] [4/93] installing filesystem-3.1-7.1 [ 85s] [5/93] installing glibc-2.20-1.1 [ 85s] [6/93] installing libatomic-4.9.2-1.2 [ 85s] [7/93] installing libgcc-4.9.2-1.2 [ 85s] [8/93] installing libgomp-4.9.2-1.2 [ 85s] [9/93] installing bash-3.2.57-1.1 [ 86s] [10/93] installing cpio-2.11-1.1 [ 86s] [11/93] installing diffutils-3.3-1.1 [ 86s] [12/93] installing findutils-4.3.8-1.1 [ 86s] [13/93] installing hostname-3.12-1.1 [ 86s] [14/93] installing libattr-2.4.47-2.1 [ 86s] [15/93] installing libbz2-1.0.6-1.7 [ 86s] [16/93] installing libcap-2.24-1.1 [ 86s] [17/93] installing libelf-0.153-1.6 [ 86s] [18/93] installing libext2fs-1.42.13-2.1 [ 86s] [19/93] installing libfreebl3-3.23-1.6 [ 86s] [20/93] installing libitm-4.9.2-1.2 [ 86s] [21/93] installing libltdl-2.4.2-1.1 [ 86s] [22/93] installing liblua-5.1.4-1.1 [ 86s] [23/93] installing liblzma-5.1.3-1.1 [ 86s] [24/93] installing libpcre-8.39-1.1 [ 87s] [25/93] installing libpopt-1.16-1.1 [ 87s] [26/93] installing libsmack-1.3.0-2.1 [ 87s] [27/93] installing libsmartcols-2.28-1.1 [ 87s] [28/93] installing libsqlite-3.8.10.2-1.1 [ 87s] [29/93] installing libstdc++-4.9.2-1.2 [ 87s] [30/93] installing libuuid-2.28-1.1 [ 87s] [31/93] installing m4-1.4.17-1.1 [ 88s] [32/93] installing makeinfo-4.13a-1.1 [ 88s] [33/93] installing net-tools-2.0_20121208git-1.1 [ 88s] [34/93] installing nspr-4.12-1.2 [ 88s] [35/93] installing patch-2.7-1.1 [ 89s] [36/93] installing pkg-config-0.28-1.1 [ 89s] [37/93] installing sed-4.1c-1.1 [ 89s] [38/93] installing update-alternatives-1.16.3-1.1 [ 89s] [39/93] installing which-2.20-1.1 [ 89s] [40/93] installing zlib-1.2.8-1.1 [ 89s] [41/93] installing libncurses-5.9-1.1 [ 90s] [42/93] installing build-compare-2015.04.28-2.2 [ 90s] [43/93] installing libstdc++-devel-4.9.2-1.2 [ 90s] [44/93] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 91s] [45/93] installing cpp-4.9.2-1.2 [ 92s] [46/93] installing gcc-c++-4.9.2-1.2 [ 93s] [47/93] installing binutils-2.25-1.2 [ 94s] [48/93] installing coreutils-6.9-1.1 [ 94s] [49/93] installing db4-4.8.30.NC-1.1 [ 94s] [50/93] installing gawk-3.1.5-1.1 [ 94s] [51/93] installing grep-2.5.2-1.1 [ 94s] [52/93] installing less-466-1.1 [ 94s] [53/93] installing libacl-2.2.52-1.1 [ 94s] [54/93] installing libasm-0.153-1.6 [ 94s] [55/93] installing libblkid-2.28-1.1 [ 94s] [56/93] installing libreadline-5.2-1.1 [ 94s] [57/93] installing libubsan-4.9.2-1.2 [ 94s] [58/93] installing make-4.0-1.1 [ 95s] [59/93] installing nss-certs-3.23-1.6 [ 95s] [60/93] installing smack-1.3.0-2.1 [ 95s] [61/93] installing bzip2-1.0.6-1.7 [ 95s] [62/93] installing libmagic-5.28-2.1 [ 95s] [63/93] installing libxml2-2.9.4-1.1 [ 95s] [64/93] installing xz-5.1.3-1.1 [ 95s] [65/93] installing libdw-0.153-1.6 [ 95s] [66/93] installing linux-glibc-devel-3.10-1.1 [ 95s] [67/93] installing file-5.28-2.1 [ 96s] [68/93] installing glibc-locale-2.20-1.1 [ 96s] [69/93] installing libmount-2.28-1.1 [ 96s] [70/93] installing tar-1.17-1.1 [ 96s] [71/93] installing gzip-1.3.12-1.1 [ 96s] [72/93] installing libfdisk1-2.28-1.1 [ 97s] [73/93] installing pam-1.1.6-2.1 [ 97s] [74/93] installing perl-5.20.0-1.6 [ 100s] [75/93] installing tzdata-2016i-2.1 [ 100s] [76/93] installing elfutils-0.153-1.6 [ 100s] [77/93] installing gcc-4.9.2-1.2 [ 101s] [78/93] installing build-mkbaselibs-20120927-1.1 [ 101s] [79/93] installing glibc-devel-2.20-1.1 [ 101s] [80/93] installing qemu-accel-x86_64-armv7l-0.4-4.2 [ 107s] [81/93] installing autoconf-2.69-1.2 [ 107s] [82/93] installing texinfo-4.13a-1.1 [ 107s] [83/93] installing util-linux-2.28-1.1 [ 108s] [84/93] installing automake-1.14.1-1.1 [ 108s] [85/93] installing util-linux-su-2.28-1.1 [ 108s] [86/93] installing build-20120927-1.1 [ 108s] [87/93] installing libtool-2.4.2-1.1 [ 109s] [88/93] installing nss-3.23-1.6 [ 109s] [89/93] installing libsoftokn3-3.23-1.6 [ 110s] [90/93] installing rpm-4.11.0.1-1.1 [ 111s] [91/93] installing rpmlint-mini-1.5-1.1 [ 112s] [92/93] installing rpm-build-4.11.0.1-1.1 [ 112s] [93/93] installing rpmlint-tizen-1.0-1.1 [ 112s] removing nis flags from //etc/nsswitch.conf... [ 112s] now finalizing build dir... [ 122s] build target is armv7l-tizen-linux [ 122s] ----------------------------------------------------------------- [ 122s] I have the following modifications for autoconf213.spec: [ 122s] 9c9 [ 122s] < Release: 1 [ 122s] --- [ 122s] > Release: 1.2 [ 123s] ----------------------------------------------------------------- [ 123s] ----- building autoconf213.spec (user abuild) [ 123s] ----------------------------------------------------------------- [ 123s] ----------------------------------------------------------------- [ 123s] Running qemu build hang workaround... [ 123s] /bin/ps command not found [ 123s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Base/arm/93590277dfa4ee12a38f5b74b27f9a8e-autoconf213' /home/abuild/rpmbuild/SOURCES/autoconf213.spec [ 123s] Building target platforms: armv7l-tizen-linux [ 123s] Building for target armv7l-tizen-linux [ 123s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EFURtr [ 123s] + umask 022 [ 123s] + cd /home/abuild/rpmbuild/BUILD [ 123s] + cd /home/abuild/rpmbuild/BUILD [ 123s] + rm -rf autoconf-2.13 [ 123s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.13.tar.bz2 [ 123s] + /bin/tar -xf - [ 123s] + STATUS=0 [ 123s] + '[' 0 -ne 0 ']' [ 123s] + cd autoconf-2.13 [ 123s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 123s] + echo 'Patch #0 (0001-autoconf-2.12-race.patch):' [ 123s] Patch #0 (0001-autoconf-2.12-race.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-autoconf-2.12-race.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file autoconf.sh [ 123s] patching file autoheader.sh [ 123s] patching file autoupdate.sh [ 123s] + echo 'Patch #1 (0002-autoconf-2.13-mawk.patch):' [ 123s] Patch #1 (0002-autoconf-2.13-mawk.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-autoconf-2.13-mawk.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file acspecific.m4 [ 123s] patching file autoconf.texi [ 123s] patching file configure [ 123s] + echo 'Patch #2 (0003-autoconf-2.13-notmp.patch):' [ 123s] Patch #2 (0003-autoconf-2.13-notmp.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-autoconf-2.13-notmp.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file autoconf.sh [ 123s] patching file autoupdate.sh [ 123s] + echo 'Patch #3 (0004-autoconf-2.13-c-exit.patch):' [ 123s] Patch #3 (0004-autoconf-2.13-c-exit.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-autoconf-2.13-c-exit.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file acgeneral.m4 [ 123s] patching file acspecific.m4 [ 123s] + echo 'Patch #4 (0005-autoconf-2.13-headers.patch):' [ 123s] Patch #4 (0005-autoconf-2.13-headers.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-autoconf-2.13-headers.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file acspecific.m4 [ 123s] + echo 'Patch #5 (0006-autoconf-2.13-autoscan.patch):' [ 123s] Patch #5 (0006-autoconf-2.13-autoscan.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-autoconf-2.13-autoscan.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file autoscan.pl [ 123s] + echo 'Patch #6 (0007-autoconf-2.13-exit.patch):' [ 123s] Patch #6 (0007-autoconf-2.13-exit.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-autoconf-2.13-exit.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file acgeneral.m4 [ 123s] + echo 'Patch #7 (0008-autoconf-2.13-wait3test.patch):' [ 123s] Patch #7 (0008-autoconf-2.13-wait3test.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-autoconf-2.13-wait3test.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file acspecific.m4 [ 123s] + echo 'Patch #8 (0009-autoconf-2.13-make-defs-62361.patch):' [ 123s] Patch #8 (0009-autoconf-2.13-make-defs-62361.patch): [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-autoconf-2.13-make-defs-62361.patch [ 123s] patching file acgeneral.m4 [ 123s] + echo 'Patch #9 (0010-autoconf-2.13-versioning.patch):' [ 123s] Patch #9 (0010-autoconf-2.13-versioning.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-autoconf-2.13-versioning.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file Makefile.in [ 123s] + echo 'Patch #10 (0011-autoconf213-destdir.patch):' [ 123s] Patch #10 (0011-autoconf213-destdir.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-autoconf213-destdir.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file Makefile.in [ 123s] + echo 'Patch #11 (0012-autoconf213-info.patch):' [ 123s] Patch #11 (0012-autoconf213-info.patch): [ 123s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0012-autoconf213-info.patch [ 123s] + /bin/patch -p1 --fuzz=2 [ 123s] patching file Makefile.in [ 123s] patching file autoconf.texi [ 123s] + cp /home/abuild/rpmbuild/SOURCES/autoconf213.manifest . [ 123s] + mv autoconf.texi autoconf213.texi [ 123s] + rm -f autoconf.info [ 123s] + exit 0 [ 123s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.EzaxtF [ 123s] + umask 022 [ 123s] + cd /home/abuild/rpmbuild/BUILD [ 123s] + cd autoconf-2.13 [ 123s] ++ uname -m [ 123s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 123s] + LANG=C [ 123s] + export LANG [ 123s] + unset DISPLAY [ 123s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 123s] + export CFLAGS [ 123s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 123s] + export CXXFLAGS [ 123s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 123s] + export FFLAGS [ 123s] + LDFLAGS= [ 123s] + export LDFLAGS [ 123s] + LD_AS_NEEDED=1 [ 123s] + export LD_AS_NEEDED [ 123s] + ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 [ 123s] creating cache ./config.cache [ 123s] checking for gm4... no [ 123s] checking for gnum4... no [ 123s] checking for m4... /bin/m4 [ 123s] checking for gawk... gawk [ 123s] checking for perl... /bin/perl [ 123s] checking for a BSD compatible install... /bin/install -c [ 123s] updating cache ./config.cache [ 123s] creating ./config.status [ 123s] creating Makefile [ 123s] creating testsuite/Makefile [ 123s] + make [ 123s] cd . && \ [ 123s] rm -f configure configure.tmp && \ [ 123s] /bin/m4 autoconf.m4 configure.in > configure.tmp && \ [ 123s] chmod +x configure.tmp && mv configure.tmp configure [ 123s] /bin/sh ./config.status --recheck [ 123s] running /bin/sh ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 --no-create --no-recursion [ 123s] loading cache ./config.cache [ 123s] checking for gm4... (cached) /bin/m4 [ 123s] checking for gawk... (cached) gawk [ 123s] checking for perl... (cached) /bin/perl [ 123s] checking for a BSD compatible install... (cached) /bin/install -c [ 123s] creating ./config.status [ 124s] /bin/sh ./config.status [ 124s] creating Makefile [ 124s] creating testsuite/Makefile [ 124s] rm -f autoconf autoconf.tmp [ 124s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf [ 124s] rm -f autoheader autoheader.tmp [ 124s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader [ 124s] rm -f autoreconf autoreconf.tmp [ 124s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf [ 124s] rm -f autoupdate autoupdate.tmp [ 124s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate [ 124s] rm -f ifnames ifnames.tmp [ 124s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames [ 124s] rm -f autoscan autoscan.tmp [ 124s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan [ 124s] freezing autoconf.m4 [ 124s] freezing autoheader.m4 [ 124s] makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info [ 124s] ./autoconf213.texi:784: warning: `(' follows defined name `AC_CONFIG_AUX_DIR' instead of whitespace. [ 124s] + exit 0 [ 124s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.KRmUJY [ 124s] + umask 022 [ 124s] + cd /home/abuild/rpmbuild/BUILD [ 124s] + cd autoconf-2.13 [ 124s] + LANG=C [ 124s] + export LANG [ 124s] + unset DISPLAY [ 124s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm [ 124s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm [ 124s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm install [ 124s] /bin/sh ./mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/bin /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/info /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/autoconf-2.13 [ 124s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr [ 124s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/bin [ 124s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share [ 124s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/info [ 124s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/autoconf-2.13 [ 124s] if test -f autoconf213.info; then \ [ 124s] for i in *.info*; do \ [ 124s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/info/$i; \ [ 124s] done; \ [ 124s] else \ [ 124s] for i in ./*.info*; do \ [ 124s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/info/`echo $i | sed 's|^./||'`; \ [ 124s] done; \ [ 124s] fi [ 125s] for p in autoconf autoheader autoreconf autoupdate ifnames ; do \ [ 125s] /bin/install -c $p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/bin/`echo $p|sed 's,$,-2.13,; '`; \ [ 125s] done [ 125s] for i in autoconf.m4f autoheader.m4f; do \ [ 125s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/autoconf-2.13/$i; \ [ 125s] done [ 125s] for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \ [ 125s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/autoconf-2.13/$i; \ [ 125s] done [ 125s] if test -f autoscan; then \ [ 125s] /bin/install -c autoscan /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/bin/`echo autoscan|sed 's,$,-2.13,; '`; \ [ 125s] for i in acfunctions acheaders acidentifiers acprograms \ [ 125s] acmakevars; do \ [ 125s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm//usr/share/autoconf-2.13/$i; \ [ 125s] done; \ [ 125s] else :; fi [ 125s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/info/dir [ 125s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm -regex '.*\.la$' [ 125s] + xargs rm -f -- [ 125s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm -regex '.*\.a$' [ 125s] + xargs rm -f -- [ 125s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/info/standards.info [ 125s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/autoconf-2.13 [ 125s] + /usr/lib/rpm/check-buildroot [ 125s] + /usr/lib/rpm//brp-compress [ 125s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 125s] + /usr/lib/rpm/brp-python-hardlink [ 125s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm [ 125s] Processing files: autoconf213-2.13-1.2.noarch [ 125s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 125s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 125s] [ 125s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.6Qhdyl [ 125s] + umask 022 [ 125s] + cd /home/abuild/rpmbuild/BUILD [ 125s] + cd autoconf-2.13 [ 125s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 125s] + export DOCDIR [ 125s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 125s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 125s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 125s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 125s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 126s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm/usr/share/doc/packages/autoconf213 [ 126s] + exit 0 [ 126s] Provides: autoconf213 = 2.13-1.2 [ 126s] Requires(interp): /bin/sh /bin/sh [ 126s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 126s] Requires(post): /bin/sh [ 126s] Requires(postun): /bin/sh [ 126s] Requires: /bin/perl /bin/sh [ 126s] Processing files: autoconf213-debugsource-2.13-1.2.noarch [ 126s] Provides: autoconf213-debugsource = 2.13-1.2 [ 126s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 126s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm [ 126s] warning: Could not canonicalize hostname: w28 [ 126s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-1.2.src.rpm [ 126s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.2.noarch.rpm [ 126s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-debugsource-2.13-1.2.noarch.rpm [ 126s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qiTkMV [ 126s] + umask 022 [ 126s] + cd /home/abuild/rpmbuild/BUILD [ 126s] + cd autoconf-2.13 [ 126s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm [ 126s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.2.arm [ 126s] + exit 0 [ 126s] ... checking for files with abuild user/group [ 126s] [ 126s] RPMLINT report: [ 126s] =============== [ 127s] autoconf213.noarch: E: non-standard-group (Badness: 200) Development/Tools/Building [ 127s] autoconf213.src: E: non-standard-group (Badness: 200) Development/Tools/Building [ 127s] The value of the Group tag in the package is not valid. Valid groups are [ 127s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 127s] [ 127s] autoconf213.noarch: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/autoconf213/COPYING [ 127s] A file whose name suggests that it contains a license is included in the [ 127s] package as a document. Such files need to be marked with %license and not with [ 127s] %doc, which will install them in a special directory seperated from the [ 127s] documentation. [ 127s] [ 127s] autoconf213.src: W: invalid-url Source0: autoconf-2.13.tar.bz2 [ 127s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 127s] [ 127s] autoconf213.noarch: E: invalid-license (Badness: 200) GPL v2 [ 127s] autoconf213.noarch: E: invalid-license (Badness: 200) later [ 127s] autoconf213.src: E: invalid-license (Badness: 200) GPL v2 [ 127s] autoconf213.src: E: invalid-license (Badness: 200) later [ 127s] The specified license string is not recognized. Please refer to [ 127s] http://spdx.org/licenses/ for the list of known licences and their exact [ 127s] spelling. [ 127s] [ 127s] 2 packages and 0 specfiles checked; 7 errors, 1 warnings. [ 127s] [ 127s] ... creating baselibs [ 129s] ... comparing built packages with the former built [ 129s] /usr/lib/build/pkg-diff.sh [ 129s] /usr/lib/build/same-build-result.sh: line 36: is_prerelease_project: command not found [ 129s] This is a prerelease project. Do not check the existence of source rpm files. [ 129s] compare /.build.oldpackages/autoconf213-2.13-1.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.2.noarch.rpm [ 129s] Comparing autoconf213-2.13-1.1.noarch.rpm to autoconf213-2.13-1.2.noarch.rpm [ 130s] This is not a prerelease project. Compare the project name. [ 130s] comparing rpmtags [ 130s] comparing RELEASE [ 130s] comparing PROVIDES [ 130s] comparing scripts [ 130s] comparing filelist [ 130s] comparing file checksum [ 130s] creating rename script [ 130s] RPM file checksum differs. [ 130s] Extracting packages [ 130s] /usr/share/autoconf-2.13/autoconf.m4f differs (C source, ASCII text) [ 131s] --- old//usr/share/autoconf-2.13/autoconf.m4f 2016-10-28 12:16:17.000000000 +0000 [ 131s] +++ new//usr/share/autoconf-2.13/autoconf.m4f 2016-12-09 14:05:41.000000000 +0000 [ 131s] @@ -2,367 +2,95 @@ [ 131s] V1 [ 131s] Q1,1 [ 131s] [] [ 131s] -T9,52 [ 131s] -AC_ALLOCAAC_PRO([AC_ALLOCA])indir([AC_FUNC_ALLOCA])[]AC_EPI() [ 131s] -F9,9 [ 131s] -debugmodedebugmode [ 131s] -F8,8 [ 131s] -undivertundivert [ 131s] -T9,519 [ 131s] -AC_OBJEXTAC_PRO([AC_OBJEXT])AC_MSG_CHECKING([for object suffix]) [ 131s] -AC_CACHE_VAL(ac_cv_objext, [ 131s] -[rm -f conftest* [ 131s] -echo 'int i = 1;' > conftest.$ac_ext [ 131s] -if AC_TRY_EVAL(ac_compile); then [ 131s] - for ac_file in conftest.*; do [ 131s] - case $ac_file in [ 131s] - *.c) ;; [ 131s] - *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; [ 131s] - esac [ 131s] - done [ 131s] -else [ 131s] - AC_MSG_ERROR([installation or configuration problem; compiler does not work]) [ 131s] -fi [ 131s] -rm -f conftest*]) [ 131s] -AC_MSG_RESULT($ac_cv_objext) [ 131s] -OBJEXT=$ac_cv_objext [ 131s] -ac_objext=$ac_cv_objext [ 131s] -AC_SUBST(OBJEXT)[]AC_EPI() [ 131s] -T15,261 [ 131s] -AC_LONG_64_BITSAC_PRO([AC_LONG_64_BITS])AC_OBSOLETE([$0], [; instead use AC_CHECK_SIZEOF(long)])dnl [ 131s] -AC_MSG_CHECKING(whether long int is 64 bits) [ 131s] -AC_TRY_RUN([main() { exit(sizeof(long int) != 8); }], [ 131s] - [AC_MSG_RESULT(yes) [ 131s] - AC_DEFINE(LONG_64_BITS)], AC_MSG_RESULT(no)) [ 131s] -[]AC_EPI() [ 131s] -T18,757 [ 131s] -AC_CANONICAL_BUILDAC_PRO([AC_CANONICAL_BUILD])AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl [ 131s] -AC_MSG_CHECKING(build system type) [ 131s] - [ 131s] -dnl Set build_alias. [ 131s] -build_alias=$build [ 131s] -case "$build_alias" in [ 131s] -NONE) [ 131s] - case $nonopt in [ 131s] - NONE) build_alias=$host_alias ;; [ 131s] - *) build_alias=$nonopt ;; [ 131s] - esac ;; [ 131s] -esac [ 131s] - [ 131s] -dnl Set the other build vars. [ 131s] -changequote(<<, >>)dnl [ 131s] -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` [ 131s] -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` [ 131s] -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` [ 131s] -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` [ 131s] +T15,909 [ 131s] +AC_PROG_F77_C_OAC_PRO([AC_PROG_F77_C_O])AC_BEFORE([$0], [AC_PROG_F77])dnl [ 131s] +AC_MSG_CHECKING(whether $F77 understand -c and -o together) [ 131s] +set dummy $F77; ac_f77="`echo [$]2 | [ 131s] +changequote(, )dnl [ 131s] +sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`" [ 131s] changequote([, ])dnl [ 131s] -AC_MSG_RESULT($build) [ 131s] -AC_SUBST(build)dnl [ 131s] -AC_SUBST(build_alias)dnl [ 131s] -AC_SUBST(build_cpu)dnl [ 131s] -AC_SUBST(build_vendor)dnl [ 131s] -AC_SUBST(build_os)dnl [ 131s] -[]AC_EPI() [ 131s] -T11,56 [ 131s] -AC_SET_MAKEAC_PRO([AC_SET_MAKE])indir([AC_PROG_MAKE_SET])[]AC_EPI() [ 131s] -F5,5 [ 131s] -indirindir [ 131s] -T11,350 [ 131s] -AC_C_INLINEAC_PRO([AC_C_INLINE])AC_CACHE_CHECK([for inline], ac_cv_c_inline, [ 131s] -[ac_cv_c_inline=no [ 131s] -for ac_kw in inline __inline__ __inline; do [ 131s] - AC_TRY_COMPILE(, [} $ac_kw foo() {], [ac_cv_c_inline=$ac_kw; break]) [ 131s] -done [ 131s] -]) [ 131s] -case "$ac_cv_c_inline" in [ 131s] - inline | yes) ;; [ 131s] - no) AC_DEFINE(inline, ) ;; [ 131s] - *) AC_DEFINE_UNQUOTED(inline, $ac_cv_c_inline) ;; [ 131s] -esac [ 131s] -[]AC_EPI() [ 131s] -T15,82 [ 131s] -AC_EGREP_HEADERAC_PRO([AC_EGREP_HEADER])AC_EGREP_CPP([$1], [#include <$2>], [$3], [$4])[]AC_EPI() [ 131s] -F5,5 [ 131s] -indexindex [ 131s] -T13,1856 [ 131s] -AC_CHECK_PROGAC_PRO([AC_CHECK_PROG])# Extract the first word of "$2", so it can be a program name with args. [ 131s] -set dummy $2; ac_word=[$]2 [ 131s] -AC_MSG_CHECKING([for $ac_word]) [ 131s] -AC_CACHE_VAL(ac_cv_prog_$1, [ 131s] -[if test -n "[$]$1"; then [ 131s] - ac_cv_prog_$1="[$]$1" # Let the user override the test. [ 131s] +AC_CACHE_VAL(ac_cv_prog_f77_${ac_f77}_c_o, [ 131s] +[cat > conftest.f << EOF [ 131s] + program conftest [ 131s] + end [ 131s] +EOF [ 131s] +# We do the `AC_TRY_EVAL' test twice because some compilers refuse to [ 131s] +# overwrite an existing `.o' file with `-o', although they will create [ 131s] +# one. [ 131s] +ac_try='$F77 $FFLAGS -c conftest.f -o conftest.o 1>&AC_FD_CC' [ 131s] +if AC_TRY_EVAL(ac_try) && test -f conftest.o && AC_TRY_EVAL(ac_try); then [ 131s] + eval ac_cv_prog_f77_${ac_f77}_c_o=yes [ 131s] else [ 131s] - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" [ 131s] -ifelse([$6], , , [ ac_prog_rejected=no [ 131s] -])dnl [ 131s] -dnl $ac_dummy forces splitting on constant user-supplied paths. [ 131s] -dnl POSIX.2 word splitting is done only on the output of word expansions, [ 131s] -dnl not every word. This closes a longstanding sh security hole. [ 131s] - ac_dummy="ifelse([$5], , $PATH, [$5])" [ 131s] - for ac_dir in $ac_dummy; do [ 131s] - test -z "$ac_dir" && ac_dir=. [ 131s] - if test -f $ac_dir/$ac_word; then [ 131s] -ifelse([$6], , , dnl [ 131s] -[ if test "[$ac_dir/$ac_word]" = "$6"; then [ 131s] - ac_prog_rejected=yes [ 131s] - continue [ 131s] - fi [ 131s] -])dnl [ 131s] - ac_cv_prog_$1="$3" [ 131s] - break [ 131s] - fi [ 131s] - done [ 131s] - IFS="$ac_save_ifs" [ 131s] -ifelse([$6], , , [if test $ac_prog_rejected = yes; then [ 131s] - # We found a bogon in the path, so make sure we never use it. [ 131s] - set dummy [$]ac_cv_prog_$1 [ 131s] - shift [ 131s] - if test [$]# -gt 0; then [ 131s] - # We chose a different compiler from the bogus one. [ 131s] - # However, it has the same basename, so the bogon will be chosen [ 131s] - # first if we set $1 to just the basename; use the full file name. [ 131s] - shift [ 131s] - set dummy "$ac_dir/$ac_word" "[$]@" [ 131s] - shift [ 131s] - ac_cv_prog_$1="[$]@" [ 131s] -ifelse([$2], [$4], dnl [ 131s] -[ else [ 131s] - # Default is a loser. [ 131s] - AC_MSG_ERROR([$1=$6 unacceptable, but no other $4 found in dnl [ 131s] -ifelse([$5], , [\$]PATH, [$5])]) [ 131s] -])dnl [ 131s] - fi [ 131s] + eval ac_cv_prog_f77_${ac_f77}_c_o=no [ 131s] fi [ 131s] +rm -f conftest* [ 131s] ])dnl [ 131s] -dnl If no 4th arg is given, leave the cache variable unset, [ 131s] -dnl so AC_CHECK_PROGS will keep looking. [ 131s] -ifelse([$4], , , [ test -z "[$]ac_cv_prog_$1" && ac_cv_prog_$1="$4" [ 131s] -])dnl [ 131s] -fi])dnl [ 131s] -$1="$ac_cv_prog_$1" [ 131s] -if test -n "[$]$1"; then [ 131s] - AC_MSG_RESULT([$]$1) [ 131s] +if eval "test \"`echo '$ac_cv_prog_f77_'${ac_f77}_c_o`\" = yes"; then [ 131s] + AC_MSG_RESULT(yes) [ 131s] else [ 131s] AC_MSG_RESULT(no) [ 131s] + AC_DEFINE(F77_NO_MINUS_C_MINUS_O) [ 131s] fi [ 131s] -AC_SUBST($1)dnl [ 131s] []AC_EPI() [ 131s] -T13,1989 [ 131s] -AC_CACHE_SAVEcat > confcache <<\EOF [ 131s] -# This file is a shell script that caches the results of configure [ 131s] -# tests run on this system so they can be shared between configure [ 131s] -# scripts and configure runs. It is not useful on other systems. [ 131s] -# If it contains results you don't want to keep, you may remove or edit it. [ 131s] -# [ 131s] -# By default, configure uses ./config.cache as the cache file, [ 131s] -# creating it if it does not exist already. You can give configure [ 131s] -# the --cache-file=FILE option to use a different cache file; that is [ 131s] -# what configure does when it calls configure scripts in [ 131s] -# subdirectories, so they share the cache. [ 131s] -# Giving --cache-file=/dev/null disables caching, for debugging configure. [ 131s] -# config.status only pays attention to the cache file if you give it the [ 131s] -# --recheck option to rerun configure. [ 131s] +T6,233 [ 131s] +AC_AIXAC_PRO([AC_AIX])AC_BEFORE([$0], [AC_TRY_COMPILE])dnl [ 131s] +AC_BEFORE([$0], [AC_TRY_RUN])dnl [ 131s] +AC_MSG_CHECKING(for AIX) [ 131s] +AC_EGREP_CPP(yes, [ 131s] +[#ifdef _AIX [ 131s] + yes [ 131s] +#endif [ 131s] +], [AC_MSG_RESULT(yes); AC_DEFINE(_ALL_SOURCE)], AC_MSG_RESULT(no)) [ 131s] +[]AC_EPI() [ 131s] +F6,6 [ 131s] +substrsubstr [ 131s] compare /.build.oldpackages/autoconf213-debugsource-2.13-1.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/autoconf213-debugsource-2.13-1.2.noarch.rpm [ 131s] Comparing autoconf213-debugsource-2.13-1.1.noarch.rpm to autoconf213-debugsource-2.13-1.2.noarch.rpm [ 131s] This is not a prerelease project. Compare the project name. [ 131s] comparing rpmtags [ 131s] comparing RELEASE [ 131s] comparing PROVIDES [ 131s] comparing scripts [ 131s] comparing filelist [ 131s] comparing file checksum [ 131s] creating rename script [ 131s] RPM meta information is identical [ 131s] do not compare rpmlint.log if it is a prerelease project! [ 131s] ... saving built statistics [ 131s] ... saving built packages [ 132s] /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.2.noarch.rpm [ 132s] /home/abuild/rpmbuild/RPMS/noarch/autoconf213-debugsource-2.13-1.2.noarch.rpm [ 132s] /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-1.2.src.rpm [ 132s] /home/abuild/rpmbuild/OTHER/_statistics [ 132s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 132s] [ 132s] w28 finished "build autoconf213.spec" at Fri Dec 9 14:05:49 UTC 2016. [ 132s] [ 136s] [ 111.655374] SysRq : Power Off [ 136s] [ 111.868338] Power down. [ 136s] build: extracting built packages... [ 137s] autoconf213-2.13-1.2.noarch.rpm [ 137s] autoconf213-debugsource-2.13-1.2.noarch.rpm [ 137s] autoconf213-2.13-1.2.src.rpm [ 137s] _statistics [ 137s] rpmlint.log Retried build at Fri Dec 16 12:38:13 2016 returned same result, skipped Retried build at Fri Dec 16 14:04:22 2016 returned same result, skipped