[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=aarch64 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:powertop.spec" at Fri Dec 9 16:24:12 UTC 2016. [ 0s] [ 0s] Building powertop for project 'Tizen:3.0:Common' repository 'arm64-wayland' arch 'aarch64' srcmd5 '692904196ce6bd6ddd021d53f847fc6a' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:powertop.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:powertop.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling bash... [ 0s] [6/40] preinstalling diffutils... [ 0s] [7/40] preinstalling grep... [ 0s] [8/40] preinstalling libattr... [ 0s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 3s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 4s] [26/40] preinstalling coreutils... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling libmount... [ 4s] [35/40] preinstalling tar... [ 4s] [36/40] preinstalling util-linux... [ 4s] [37/40] preinstalling util-linux-su... [ 4s] [38/40] preinstalling nss... [ 4s] [39/40] preinstalling libsoftokn3... [ 4s] [40/40] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 5s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 23s] booting kvm ... [ 23s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 26s] doing fast boot [ 26s] Creating device nodes with udev [ 30s] Waiting for device /dev/vda to appear: ok [ 30s] fsck from util-linux 2.21.2 [ 30s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 30s] /dev/vda: clean, 5022/2392064 files, 264790/9568256 blocks [ 30s] fsck succeeded. Mounting root device read-write. [ 30s] Mounting root /dev/vda [ 30s] mount -o rw -t ext4 /dev/vda /root [ 30s] replacing /etc/mtab with symlink to /proc/self/mounts [ 42s] 2nd stage started in virtual machine [ 42s] machine type: aarch64 [ 42s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 42s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 42s] swapon /dev/vdb [ 43s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 45s] mount: none is already mounted or /proc busy [ 45s] mount: none is already mounted or /dev/pts busy [ 45s] logging output to //.build.log... [ 45s] processing specfile /.build-srcdir/_service:gbs:powertop.spec ... [ 45s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 54s] running qemu-linux-user-x86_64-cross postinstall script [ 55s] running qemu-accel-x86_64-aarch64 postinstall script [ 56s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/4.9.2/liblto_plugin.so': No such file or directory [ 56s] running setup postinstall script [ 56s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 56s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 56s] initializing rpm db... [ 62s] [1/98] installing libmagic-data-5.28-2.1 [ 63s] [2/98] installing setup-0.9-1.2 [ 63s] [3/98] installing terminfo-base-5.9-1.1 [ 64s] [4/98] installing filesystem-3.1-7.1 [ 68s] [5/98] installing glibc-2.20-1.1 [ 69s] [6/98] installing bash-3.2.57-1.1 [ 69s] [7/98] installing cpio-2.11-1.1 [ 69s] [8/98] installing diffutils-3.3-1.1 [ 69s] [9/98] installing findutils-4.3.8-1.1 [ 69s] [10/98] installing hostname-3.12-1.1 [ 69s] [11/98] installing libatomic-4.9.2-1.3 [ 69s] [12/98] installing libattr-2.4.47-2.1 [ 69s] [13/98] installing libbz2-1.0.6-1.6 [ 70s] [14/98] installing libcap-2.24-1.1 [ 70s] [15/98] installing libelf-0.153-1.6 [ 70s] [16/98] installing libext2fs-1.42.13-2.1 [ 70s] [17/98] installing libfreebl3-3.23-1.6 [ 70s] [18/98] installing libgcc-4.9.2-1.3 [ 70s] [19/98] installing libgomp-4.9.2-1.3 [ 70s] [20/98] installing libitm-4.9.2-1.3 [ 70s] [21/98] installing libltdl-2.4.2-1.1 [ 70s] [22/98] installing liblua-5.1.4-1.1 [ 70s] [23/98] installing liblzma-5.1.3-1.1 [ 71s] [24/98] installing libnl2-2.0-1.1 [ 71s] [25/98] installing libpcre-8.39-1.1 [ 71s] [26/98] installing libpopt-1.16-1.1 [ 71s] [27/98] installing libsmack-1.3.0-2.1 [ 71s] [28/98] installing libsmartcols-2.28-1.1 [ 71s] [29/98] installing libsqlite-3.8.10.2-1.1 [ 71s] [30/98] installing libuuid-2.28-1.1 [ 71s] [31/98] installing m4-1.4.17-1.1 [ 71s] [32/98] installing net-tools-2.0_20121208git-1.1 [ 71s] [33/98] installing nspr-4.12-1.2 [ 71s] [34/98] installing patch-2.7-1.1 [ 71s] [35/98] installing pkg-config-0.28-1.1 [ 71s] [36/98] installing sed-4.1c-1.1 [ 71s] [37/98] installing update-alternatives-1.16.3-1.1 [ 71s] [38/98] installing which-2.20-1.1 [ 72s] [39/98] installing zlib-1.2.8-1.1 [ 72s] [40/98] installing libncurses-5.9-1.1 [ 72s] [41/98] installing libncurses6-5.9-1.1 [ 72s] [42/98] installing build-compare-2015.04.28-2.2 [ 72s] [43/98] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 76s] [44/98] installing coreutils-6.9-1.1 [ 76s] [45/98] installing cpp-4.9.2-1.3 [ 77s] [46/98] installing gawk-3.1.5-1.1 [ 77s] [47/98] installing gcc-c++-4.9.2-1.3 [ 77s] [48/98] installing grep-2.5.2-1.1 [ 77s] [49/98] installing less-466-1.1 [ 78s] [50/98] installing libacl-2.2.52-1.1 [ 78s] [51/98] installing libasm-0.153-1.6 [ 79s] [52/98] installing libblkid-2.28-1.1 [ 79s] [53/98] installing libnl2-devel-2.0-1.1 [ 79s] [54/98] installing libreadline-5.2-1.1 [ 79s] [55/98] installing libstdc++-4.9.2-1.3 [ 79s] [56/98] installing make-4.0-1.1 [ 80s] [57/98] installing nss-certs-3.23-1.6 [ 80s] [58/98] installing smack-1.3.0-2.1 [ 80s] [59/98] installing binutils-2.25-1.3 [ 80s] [60/98] installing bzip2-1.0.6-1.6 [ 81s] [61/98] installing libmagic-5.28-2.1 [ 81s] [62/98] installing libxml2-2.9.4-1.1 [ 81s] [63/98] installing xz-5.1.3-1.1 [ 81s] [64/98] installing ncurses-devel-5.9-1.1 [ 81s] [65/98] installing libdw-0.153-1.6 [ 82s] [66/98] installing libstdc++-devel-4.9.2-1.3 [ 82s] [67/98] installing file-5.28-2.1 [ 82s] [68/98] installing libmount-2.28-1.1 [ 82s] [69/98] installing linux-glibc-devel-3.10-1.1 [ 83s] [70/98] installing tar-1.17-1.1 [ 83s] [71/98] installing db4-4.8.30.NC-1.1 [ 84s] [72/98] installing gettext-runtime-0.19.7-1.1 [ 87s] [73/98] installing glibc-locale-2.20-1.1 [ 90s] [74/98] installing gzip-1.3.12-1.1 [ 90s] [75/98] installing libfdisk1-2.28-1.1 [ 91s] [76/98] installing libubsan-4.9.2-1.3 [ 91s] [77/98] installing pam-1.1.6-2.1 [ 92s] [78/98] installing tzdata-2016i-2.1 [ 93s] [79/98] installing elfutils-0.153-1.6 [ 94s] [80/98] installing glibc-devel-2.20-1.1 [ 95s] [81/98] installing gettext-tools-0.19.7-1.1 [ 96s] [82/98] installing perl-5.20.0-1.6 [ 126s] [83/98] installing gcc-4.9.2-1.3 [ 129s] [84/98] installing util-linux-2.28-1.1 [ 130s] [85/98] installing build-mkbaselibs-20120927-1.1 [ 130s] [86/98] installing qemu-accel-x86_64-aarch64-0.4-4.2 [ 142s] [87/98] installing autoconf-2.69-1.1 [ 142s] [88/98] installing util-linux-su-2.28-1.1 [ 143s] [89/98] installing zlib-devel-1.2.8-1.1 [ 143s] [90/98] installing automake-1.14.1-1.1 [ 143s] [91/98] installing build-20120927-1.1 [ 144s] [92/98] installing libtool-2.4.2-1.1 [ 144s] [93/98] installing nss-3.23-1.6 [ 145s] [94/98] installing libsoftokn3-3.23-1.6 [ 145s] [95/98] installing rpm-4.11.0.1-1.1 [ 150s] [96/98] installing rpmlint-mini-1.5-1.2 [ 152s] [97/98] installing rpm-build-4.11.0.1-1.1 [ 152s] [98/98] installing rpmlint-tizen-1.0-1.1 [ 152s] removing nis flags from //etc/nsswitch.conf... [ 153s] now finalizing build dir... [ 164s] build target is aarch64-tizen-linux [ 164s] ----------------------------------------------------------------- [ 164s] I have the following modifications for powertop.spec: [ 164s] 4c4 [ 164s] < Release: 1 [ 164s] --- [ 164s] > Release: 1.2 [ 164s] 11c11 [ 164s] < BuildRequires: gettext [ 164s] --- [ 164s] > BuildRequires: gettext-tools [ 164s] 46a47 [ 164s] > %changelog [ 164s] ----------------------------------------------------------------- [ 164s] ----- building powertop.spec (user abuild) [ 164s] ----------------------------------------------------------------- [ 164s] ----------------------------------------------------------------- [ 164s] Running qemu build hang workaround... [ 164s] /bin/ps command not found [ 165s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Common/arm64-wayland/692904196ce6bd6ddd021d53f847fc6a-powertop' /home/abuild/rpmbuild/SOURCES/powertop.spec [ 165s] Building target platforms: aarch64-tizen-linux [ 165s] Building for target aarch64-tizen-linux [ 165s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9g6vL1 [ 165s] + umask 022 [ 165s] + cd /home/abuild/rpmbuild/BUILD [ 165s] + cd /home/abuild/rpmbuild/BUILD [ 165s] + rm -rf powertop-2.5 [ 165s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/powertop-2.5.tar.gz [ 165s] + /bin/tar -xf - [ 165s] + STATUS=0 [ 165s] + '[' 0 -ne 0 ']' [ 165s] + cd powertop-2.5 [ 165s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 165s] + cp /home/abuild/rpmbuild/SOURCES/powertop.manifest . [ 165s] + exit 0 [ 165s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AtVCYC [ 165s] + umask 022 [ 165s] + cd /home/abuild/rpmbuild/BUILD [ 165s] + cd powertop-2.5 [ 165s] ++ uname -m [ 165s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 165s] + ref=/usr/lib/rpm [ 165s] + for s in guess sub [ 165s] ++ find -maxdepth 8 -name config.guess [ 165s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 165s] + grep -q config-patches@ ./config.guess [ 165s] + grep -q aarch64 ./config.guess [ 165s] + grep -q ppc64le ./config.guess [ 165s] + install -m 755 /usr/lib/rpm/config.guess ./config.guess [ 165s] + for s in guess sub [ 165s] ++ find -maxdepth 8 -name config.sub [ 165s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 165s] + grep -q config-patches@ ./config.sub [ 165s] + grep -q aarch64 ./config.sub [ 165s] + grep -q ppc64le ./config.sub [ 165s] + LANG=C [ 165s] + export LANG [ 165s] + unset DISPLAY [ 165s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 165s] + export CFLAGS [ 165s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 165s] + export CXXFLAGS [ 165s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 165s] + export FFLAGS [ 165s] + LDFLAGS= [ 165s] + export LDFLAGS [ 165s] + LD_AS_NEEDED=1 [ 165s] + export LD_AS_NEEDED [ 165s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 165s] + export CFLAGS [ 165s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 165s] + export CXXFLAGS [ 165s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 165s] + export FFLAGS [ 165s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 165s] checking for a BSD-compatible install... /bin/install -c [ 165s] checking whether build environment is sane... yes [ 165s] /home/abuild/rpmbuild/BUILD/powertop-2.5/missing: Unknown `--is-lightweight' option [ 165s] Try `/home/abuild/rpmbuild/BUILD/powertop-2.5/missing --help' for more information [ 165s] configure: WARNING: 'missing' script is too old or missing [ 165s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 165s] checking for gawk... gawk [ 165s] checking whether make sets $(MAKE)... yes [ 165s] checking whether make supports nested variables... yes [ 165s] checking whether make supports nested variables... (cached) yes [ 165s] checking whether NLS is requested... yes [ 165s] checking for msgfmt... /bin/msgfmt [ 165s] checking for gmsgfmt... /bin/msgfmt [ 165s] checking for xgettext... /bin/xgettext [ 165s] checking for msgmerge... /bin/msgmerge [ 165s] checking for style of include used by make... GNU [ 165s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 165s] checking whether the C compiler works... yes [ 165s] checking for C compiler default output file name... a.out [ 165s] checking for suffix of executables... [ 165s] checking whether we are cross compiling... no [ 165s] checking for suffix of object files... o [ 165s] checking whether we are using the GNU C compiler... yes [ 165s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 166s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 166s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 166s] checking build system type... aarch64-tizen-linux-gnu [ 166s] checking host system type... aarch64-tizen-linux-gnu [ 166s] checking for ld used by GCC... /usr/aarch64-tizen-linux-gnu/bin/ld [ 166s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 166s] checking for shared library run path origin... done [ 166s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 166s] checking whether we are using the GNU C++ compiler... yes [ 166s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 166s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 166s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 166s] checking for grep that handles long lines and -e... /bin/grep [ 166s] checking for egrep... /bin/grep -E [ 166s] checking for CFPreferencesCopyAppValue... no [ 166s] checking for CFLocaleCopyCurrent... no [ 166s] checking for GNU gettext in libc... yes [ 166s] checking whether to use NLS... yes [ 166s] checking where the gettext function comes from... libc [ 166s] checking for aarch64-tizen-linux-gnu-ar... no [ 166s] checking for aarch64-tizen-linux-gnu-lib... no [ 166s] checking for aarch64-tizen-linux-gnu-link... no [ 166s] checking for ar... ar [ 166s] checking the archiver (ar) interface... ar [ 166s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 166s] checking whether we are using the GNU C++ compiler... (cached) yes [ 166s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... (cached) yes [ 166s] checking dependency style of aarch64-tizen-linux-gnu-g++... (cached) gcc3 [ 166s] checking how to print strings... printf [ 166s] checking for a sed that does not truncate output... /bin/sed [ 166s] checking for fgrep... /bin/grep -F [ 166s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 166s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 166s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 166s] checking the name lister (/bin/nm -B) interface... BSD nm [ 166s] checking whether ln -s works... yes [ 166s] checking the maximum length of command line arguments... 1572864 [ 166s] checking whether the shell understands some XSI constructs... yes [ 166s] checking whether the shell understands "+="... yes [ 166s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 166s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 166s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 166s] checking for aarch64-tizen-linux-gnu-objdump... no [ 166s] checking for objdump... objdump [ 166s] checking how to recognize dependent libraries... pass_all [ 166s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 166s] checking for dlltool... no [ 166s] checking how to associate runtime and link libraries... printf %s\n [ 166s] checking for aarch64-tizen-linux-gnu-ar... ar [ 166s] checking for archiver @FILE support... @ [ 166s] checking for aarch64-tizen-linux-gnu-strip... no [ 166s] checking for strip... strip [ 166s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 166s] checking for ranlib... ranlib [ 166s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 166s] checking for sysroot... no [ 166s] checking for aarch64-tizen-linux-gnu-mt... no [ 166s] checking for mt... no [ 166s] checking if : is a manifest tool... no [ 166s] checking for ANSI C header files... yes [ 166s] checking for sys/types.h... yes [ 166s] checking for sys/stat.h... yes [ 166s] checking for stdlib.h... yes [ 166s] checking for string.h... yes [ 167s] checking for memory.h... yes [ 167s] checking for strings.h... yes [ 167s] checking for inttypes.h... yes [ 167s] checking for stdint.h... yes [ 167s] checking for unistd.h... yes [ 167s] checking for dlfcn.h... yes [ 167s] checking for objdir... .libs [ 167s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 167s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 167s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 167s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 167s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 167s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 167s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 167s] checking whether -lc should be explicitly linked in... no [ 167s] checking dynamic linker characteristics... GNU/Linux ld.so [ 167s] checking how to hardcode library paths into programs... immediate [ 167s] checking whether stripping libraries is possible... yes [ 167s] checking if libtool supports shared libraries... yes [ 167s] checking whether to build shared libraries... yes [ 167s] checking whether to build static libraries... no [ 167s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 167s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 167s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 167s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 167s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 167s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 167s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 167s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 167s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 167s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 167s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 167s] checking how to hardcode library paths into programs... immediate [ 167s] checking for aarch64-tizen-linux-gnu-gcc... (cached) aarch64-tizen-linux-gnu-gcc [ 167s] checking whether we are using the GNU C compiler... (cached) yes [ 167s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 167s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 167s] checking dependency style of aarch64-tizen-linux-gnu-gcc... (cached) gcc3 [ 167s] checking whether aarch64-tizen-linux-gnu-gcc and cc understand -c and -o together... yes [ 167s] checking fcntl.h usability... yes [ 167s] checking fcntl.h presence... yes [ 167s] checking for fcntl.h... yes [ 168s] checking libintl.h usability... yes [ 168s] checking libintl.h presence... yes [ 168s] checking for libintl.h... yes [ 168s] checking limits.h usability... yes [ 168s] checking limits.h presence... yes [ 168s] checking for limits.h... yes [ 168s] checking locale.h usability... yes [ 168s] checking locale.h presence... yes [ 168s] checking for locale.h... yes [ 168s] checking malloc.h usability... yes [ 168s] checking malloc.h presence... yes [ 168s] checking for malloc.h... yes [ 168s] checking for stdint.h... (cached) yes [ 168s] checking for stdlib.h... (cached) yes [ 168s] checking for string.h... (cached) yes [ 168s] checking sys/ioctl.h usability... yes [ 168s] checking sys/ioctl.h presence... yes [ 168s] checking for sys/ioctl.h... yes [ 168s] checking sys/socket.h usability... yes [ 168s] checking sys/socket.h presence... yes [ 168s] checking for sys/socket.h... yes [ 168s] checking sys/statfs.h usability... yes [ 168s] checking sys/statfs.h presence... yes [ 168s] checking for sys/statfs.h... yes [ 168s] checking sys/time.h usability... yes [ 168s] checking sys/time.h presence... yes [ 168s] checking for sys/time.h... yes [ 168s] checking termios.h usability... yes [ 168s] checking termios.h presence... yes [ 168s] checking for termios.h... yes [ 168s] checking for unistd.h... (cached) yes [ 168s] checking ncurses.h usability... yes [ 168s] checking ncurses.h presence... yes [ 168s] checking for ncurses.h... yes [ 168s] checking for stdbool.h that conforms to C99... yes [ 168s] checking for _Bool... no [ 168s] checking for inline... inline [ 168s] checking for int64_t... yes [ 168s] checking for pid_t... yes [ 169s] checking for size_t... yes [ 169s] checking for ssize_t... yes [ 169s] checking for uint16_t... yes [ 169s] checking for uint32_t... yes [ 169s] checking for uint64_t... yes [ 169s] checking for stdlib.h... (cached) yes [ 169s] checking for GNU libc compatible malloc... yes [ 169s] checking for stdlib.h... (cached) yes [ 169s] checking for unistd.h... (cached) yes [ 169s] checking for sys/param.h... yes [ 169s] checking for getpagesize... yes [ 169s] checking for working mmap... yes [ 169s] checking for stdlib.h... (cached) yes [ 169s] checking for GNU libc compatible realloc... yes [ 169s] checking for working strtod... yes [ 169s] checking for fdatasync... yes [ 169s] checking for getpagesize... (cached) yes [ 169s] checking for gettimeofday... yes [ 169s] checking for memmove... yes [ 169s] checking for memset... yes [ 169s] checking for mkdir... yes [ 170s] checking for munmap... yes [ 170s] checking for pow... yes [ 170s] checking for realpath... yes [ 170s] checking for regcomp... yes [ 170s] checking for select... yes [ 170s] checking for setlocale... yes [ 170s] checking for socket... yes [ 170s] checking for sqrt... yes [ 170s] checking for strcasecmp... yes [ 170s] checking for strchr... yes [ 170s] checking for strdup... yes [ 170s] checking for strerror... yes [ 170s] checking for strncasecmp... yes [ 170s] checking for strstr... yes [ 170s] checking for strtoul... yes [ 170s] checking for strtoull... yes [ 170s] checking for library containing delwin... -lncursesw [ 170s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 170s] checking pkg-config is at least version 0.9.0... yes [ 170s] checking for PCIUTILS... no [ 171s] checking for library containing pci_get_dev... no [ 171s] checking for LIBNL... no [ 171s] checking for LIBNL... yes [ 171s] configure: WARNING: [ 171s] ************* LIBPCI SUPPORT NOT CONFIGURED************** [ 171s] If you need or want pci support, please install libpci [ 171s] and re-configure PowerTOP. [ 171s] ********************************************************* [ 171s] [ 171s] checking for library containing pthread_create... -lpthread [ 171s] checking for library containing inet_aton... none required [ 171s] checking that generated files are newer than configure... done [ 171s] configure: creating ./config.status [ 171s] config.status: creating Makefile [ 172s] config.status: creating src/Makefile [ 172s] config.status: creating traceevent/Makefile [ 172s] config.status: creating po/Makefile.in [ 172s] config.status: creating doc/Makefile [ 172s] config.status: creating config.h [ 172s] config.status: executing po-directories commands [ 172s] config.status: creating po/POTFILES [ 172s] config.status: creating po/Makefile [ 172s] config.status: executing depfiles commands [ 173s] config.status: executing libtool commands [ 173s] + make -j4 [ 173s] make all-recursive [ 173s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 173s] Making all in traceevent [ 173s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 173s] CC event-parse.lo [ 173s] CC parse-filter.lo [ 173s] CC parse-utils.lo [ 173s] CC trace-seq.lo [ 173s] event-parse.c: In function '__read_token': [ 173s] event-parse.c:854:3: warning: implicit declaration of function 'asprintf' [-Wimplicit-function-declaration] [ 173s] if (asprintf(tok, "%c", ch) < 0) [ 173s] ^ [ 173s] event-parse.c: In function 'pevent_strerror': [ 173s] event-parse.c:5118:7: warning: assignment makes pointer from integer without a cast [ 173s] msg = strerror_r(errnum, buf, buflen); [ 173s] ^ [ 173s] parse-filter.c: In function 'arg_to_str': [ 173s] parse-filter.c:2034:8: warning: 'op' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 173s] char *op; [ 173s] ^ [ 173s] parse-filter.c: In function 'reparent_op_arg': [ 173s] parse-filter.c:752:7: warning: 'ptr' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 173s] *ptr = NULL; [ 173s] ^ [ 173s] parse-filter.c:756:3: warning: 'other_child' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 173s] free_arg(other_child); [ 173s] ^ [ 174s] event-parse.c: In function 'pevent_find_event_by_name': [ 174s] event-parse.c:3225:21: warning: 'event' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 174s] pevent->last_event = event; [ 174s] ^ [ 174s] event-parse.c: In function 'pevent_data_lat_fmt': [ 174s] event-parse.c:4352:4: warning: 'migrate_disable' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 174s] trace_seq_printf(s, "%d", migrate_disable); [ 174s] ^ [ 174s] event-parse.c:4359:4: warning: 'lock_depth' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 174s] trace_seq_printf(s, "%d", lock_depth); [ 174s] ^ [ 174s] event-parse.c: In function 'pevent_event_info': [ 174s] event-parse.c:4259:5: warning: 'len_arg' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 174s] print_str_arg(s, data, size, event, [ 174s] ^ [ 174s] event-parse.c:4056:6: note: 'len_arg' was declared here [ 174s] int len_arg; [ 174s] ^ [ 174s] CCLD libtraceevnet.la [ 174s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 174s] Making all in src [ 174s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 174s] make all-am [ 174s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 174s] CXX powertop-display.o [ 174s] CXX powertop-lib.o [ 174s] CXX powertop-devlist.o [ 174s] CXX report/powertop-report-maker.o [ 175s] CXX report/powertop-report-formatter-base.o [ 175s] In file included from /usr/include/stdio.h:27:0, [ 175s] from report/report-formatter-base.cpp:31: [ 175s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 175s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 175s] ^ [ 175s] CXX report/powertop-report-formatter-csv.o [ 175s] In file included from /usr/include/stdio.h:27:0, [ 175s] from report/report-formatter-csv.cpp:31: [ 175s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 175s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 175s] ^ [ 175s] CXX report/powertop-report-formatter-html.o [ 175s] In file included from /usr/include/stdio.h:27:0, [ 175s] from report/report-formatter-html.cpp:31: [ 175s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 175s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 175s] ^ [ 175s] CXX powertop-main.o [ 175s] CXX cpu/powertop-intel_gpu.o [ 175s] CXX cpu/powertop-cpu_rapl_device.o [ 175s] CXX cpu/powertop-dram_rapl_device.o [ 175s] CXX devices/powertop-gpu_rapl_device.o [ 176s] CXX parameters/powertop-persistent.o [ 176s] CXX parameters/powertop-learn.o [ 176s] CXX parameters/powertop-parameters.o [ 176s] CXX cpu/powertop-cpu_core.o [ 176s] CXX cpu/powertop-cpudevice.o [ 176s] CXX cpu/powertop-cpu.o [ 176s] CXX cpu/powertop-cpu_linux.o [ 176s] CXX cpu/powertop-abstract_cpu.o [ 176s] CXX cpu/powertop-cpu_package.o [ 177s] CXX cpu/powertop-intel_cpus.o [ 177s] CXX report/powertop-report.o [ 177s] CXX process/powertop-process.o [ 177s] CXX process/powertop-processdevice.o [ 177s] CXX process/powertop-powerconsumer.o [ 177s] CXX process/powertop-timer.o [ 177s] CXX process/powertop-work.o [ 177s] CXX process/powertop-do_process.o [ 177s] CXX process/powertop-interrupt.o [ 178s] CXX perf/powertop-perf.o [ 178s] CXX perf/powertop-perf_bundle.o [ 178s] CXX devices/powertop-i915-gpu.o [ 178s] CXX devices/powertop-device.o [ 178s] CXX devices/powertop-alsa.o [ 178s] CXX devices/powertop-runtime_pm.o [ 179s] CXX devices/powertop-thinkpad-fan.o [ 179s] CXX devices/powertop-usb.o [ 179s] CXX devices/powertop-ahci.o [ 179s] CXX devices/powertop-thinkpad-light.o [ 179s] CXX devices/powertop-rfkill.o [ 179s] CXX devices/powertop-backlight.o [ 179s] CXX devices/powertop-network.o [ 179s] CXX tuning/powertop-bluetooth.o [ 179s] CXX tuning/powertop-cpufreq.o [ 180s] CXX tuning/powertop-tuning.o [ 180s] tuning/bluetooth.cpp: In member function 'virtual void bt_tunable::toggle()': [ 180s] tuning/bluetooth.cpp:179:55: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("/usr/sbin/hciconfig hci0 up &> /dev/null &"); [ 180s] ^ [ 180s] tuning/bluetooth.cpp:182:54: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("/usr/sbin/hciconfig hci0 down &> /dev/null"); [ 180s] ^ [ 180s] tuning/cpufreq.cpp: In member function 'virtual void cpufreq_tunable::toggle()': [ 180s] tuning/cpufreq.cpp:119:60: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("/sbin/modprobe cpufreq_ondemand > /dev/null 2>&1"); [ 180s] ^ [ 180s] CXX tuning/powertop-tuningusb.o [ 180s] CXX tuning/powertop-ethernet.o [ 180s] CXX tuning/powertop-tunable.o [ 180s] CC tuning/powertop-iw.o [ 180s] CXX tuning/powertop-wifi.o [ 180s] CXX tuning/powertop-tuningsysfs.o [ 180s] CXX tuning/powertop-runtime.o [ 180s] CXX calibrate/powertop-calibrate.o [ 180s] CXX measurement/powertop-measurement.o [ 180s] calibrate/calibrate.cpp: In function 'void idle_calibration()': [ 180s] calibrate/calibrate.cpp:361:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 180s] ^ [ 180s] calibrate/calibrate.cpp:363:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 180s] ^ [ 180s] calibrate/calibrate.cpp: In function 'void* burn_disk(void*)': [ 180s] calibrate/calibrate.cpp:242:29: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] write(fd, buffer, 64*1024); [ 180s] ^ [ 180s] calibrate/calibrate.cpp: In function 'void backlight_calibration()': [ 180s] calibrate/calibrate.cpp:353:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 180s] ^ [ 180s] calibrate/calibrate.cpp:355:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 180s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 180s] ^ [ 181s] CXX measurement/powertop-acpi.o [ 181s] CXX measurement/powertop-sysfs.o [ 181s] CXX measurement/powertop-extech.o [ 181s] CXX cpu/rapl/powertop-rapl_interface.o [ 181s] measurement/extech.cpp: In member function 'void extech_power_meter::measure()': [ 181s] measurement/extech.cpp:290:19: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 181s] write(fd, " ", 1); [ 181s] ^ [ 181s] CXXLD powertop [ 181s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 181s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 181s] Making all in po [ 181s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 181s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 181s] Making all in doc [ 181s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 181s] make[2]: Nothing to be done for 'all'. [ 181s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 181s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 181s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 181s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 181s] + exit 0 [ 181s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.7A2M6e [ 181s] + umask 022 [ 181s] + cd /home/abuild/rpmbuild/BUILD [ 181s] + cd powertop-2.5 [ 181s] + LANG=C [ 181s] + export LANG [ 181s] + unset DISPLAY [ 181s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 [ 181s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 [ 181s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 install [ 181s] Making install in traceevent [ 181s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 181s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 181s] make[2]: Nothing to be done for 'install-exec-am'. [ 181s] make[2]: Nothing to be done for 'install-data-am'. [ 181s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 181s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 181s] Making install in src [ 181s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 181s] /bin/make install-am [ 181s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 181s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 181s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/sbin' [ 181s] /bin/sh ../libtool --mode=install /bin/install -c powertop '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/sbin' [ 181s] libtool: install: /bin/install -c powertop /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/sbin/powertop [ 182s] make[3]: Nothing to be done for 'install-data-am'. [ 182s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 182s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 182s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 182s] Making install in po [ 182s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 182s] installing ca.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/ca/LC_MESSAGES/powertop.mo [ 182s] installing cs_CZ.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/cs_CZ/LC_MESSAGES/powertop.mo [ 182s] installing de_DE.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo [ 182s] installing en_GB.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/en_GB/LC_MESSAGES/powertop.mo [ 182s] installing en_US.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/en_US/LC_MESSAGES/powertop.mo [ 182s] installing es_ES.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/es_ES/LC_MESSAGES/powertop.mo [ 182s] installing hu_HU.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo [ 182s] installing id_ID.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/id_ID/LC_MESSAGES/powertop.mo [ 182s] installing nl_NL.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo [ 182s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/locale/zh_TW/LC_MESSAGES/powertop.mo [ 182s] if test "powertop" = "gettext-tools"; then \ [ 182s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/gettext/po; \ [ 182s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 182s] /bin/install -c -m 644 ./$file \ [ 182s] /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/gettext/po/$file; \ [ 182s] done; \ [ 182s] for file in Makevars; do \ [ 182s] rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/gettext/po/$file; \ [ 182s] done; \ [ 182s] else \ [ 182s] : ; \ [ 182s] fi [ 182s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 182s] Making install in doc [ 182s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 182s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 182s] make[2]: Nothing to be done for 'install-exec-am'. [ 182s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/man/man8' [ 182s] /bin/install -c -m 644 powertop.8 '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/man/man8' [ 182s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 182s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 182s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 182s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 182s] make[2]: Nothing to be done for 'install-exec-am'. [ 182s] make[2]: Nothing to be done for 'install-data-am'. [ 182s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 182s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 182s] + rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/info/dir [ 182s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 -regex '.*\.la$' [ 182s] + xargs rm -f -- [ 182s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 -regex '.*\.a$' [ 182s] + xargs rm -f -- [ 182s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 powertop [ 182s] removing translation /usr/share/locale/id_ID/LC_MESSAGES/powertop.mo: 125 translated messages. [ 182s] removing translation /usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo: 24 translated messages. [ 182s] removing translation /usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo: 118 translated messages. [ 182s] find: `/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/help/': No such file or directory [ 182s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/powertop-2.5 [ 183s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/sbin/powertop [ 183s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 183s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 183s] cpio: glibc-2.20/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 183s] cpio: glibc-2.20/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 183s] cpio: glibc-2.20/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 183s] 1393 blocks [ 183s] + /usr/lib/rpm/check-buildroot [ 183s] + /usr/lib/rpm//brp-compress [ 183s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 183s] + /usr/lib/rpm/brp-python-hardlink [ 183s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 [ 183s] Processing files: powertop-2.5-1.2.aarch64 [ 183s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 183s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 183s] [ 183s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ava4BY [ 183s] + umask 022 [ 183s] + cd /home/abuild/rpmbuild/BUILD [ 183s] + cd powertop-2.5 [ 183s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/licenses/powertop [ 183s] + export LICENSEDIR [ 183s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/licenses/powertop [ 183s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64/usr/share/licenses/powertop [ 183s] + exit 0 [ 183s] Provides: powertop = 2.5-1.2 powertop(aarch-64) = 2.5-1.2 [ 183s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 183s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libncursesw.so.5()(64bit) libnl-genl.so.2()(64bit) libnl.so.2()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) libtinfo.so.5()(64bit) [ 183s] Processing files: powertop-debugsource-2.5-1.2.aarch64 [ 183s] Provides: powertop-debugsource = 2.5-1.2 powertop-debugsource(aarch-64) = 2.5-1.2 [ 183s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 183s] Processing files: powertop-docs-2.5-1.2.aarch64 [ 183s] Provides: powertop-docs = 2.5-1.2 powertop-docs(aarch-64) = 2.5-1.2 [ 183s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 183s] Processing files: powertop-locale-2.5-1.2.noarch [ 183s] Provides: powertop-lang-all = 2.5 powertop-locale = 2.5-1.2 [ 183s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 183s] Processing files: powertop-debuginfo-2.5-1.2.aarch64 [ 183s] Provides: powertop-debuginfo = 2.5-1.2 powertop-debuginfo(aarch-64) = 2.5-1.2 [ 183s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 183s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 [ 183s] warning: Could not canonicalize hostname: w17 [ 183s] Wrote: /home/abuild/rpmbuild/SRPMS/powertop-2.5-1.2.src.rpm [ 184s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/powertop-2.5-1.2.aarch64.rpm [ 184s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/powertop-debugsource-2.5-1.2.aarch64.rpm [ 184s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/powertop-docs-2.5-1.2.aarch64.rpm [ 184s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.2.noarch.rpm [ 185s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/powertop-debuginfo-2.5-1.2.aarch64.rpm [ 185s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.2XNR6n [ 185s] + umask 022 [ 185s] + cd /home/abuild/rpmbuild/BUILD [ 185s] + cd powertop-2.5 [ 185s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-1.2.aarch64 [ 185s] + exit 0 [ 186s] ... checking for files with abuild user/group [ 186s] [ 186s] RPMLINT report: [ 186s] =============== [ 186s] powertop.aarch64: W: file-contains-current-date /usr/sbin/powertop [ 186s] Your file contains the current date, this may cause the package to rebuild in [ 186s] excess. [ 186s] [ 186s] 4 packages and 0 specfiles checked; 0 errors, 1 warnings. [ 186s] [ 187s] ... creating baselibs [ 187s] ... comparing built packages with the former built [ 187s] /usr/lib/build/pkg-diff.sh [ 187s] /usr/lib/build/same-build-result.sh: line 36: is_prerelease_project: command not found [ 187s] This is a prerelease project. Do not check the existence of source rpm files. [ 188s] compare /.build.oldpackages/powertop-2.5-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/powertop-2.5-1.2.aarch64.rpm [ 188s] Comparing powertop-2.5-1.1.aarch64.rpm to powertop-2.5-1.2.aarch64.rpm [ 188s] This is not a prerelease project. Compare the project name. [ 188s] comparing rpmtags [ 188s] comparing RELEASE [ 188s] comparing PROVIDES [ 188s] comparing scripts [ 188s] comparing filelist [ 188s] comparing file checksum [ 188s] creating rename script [ 188s] RPM file checksum differs. [ 188s] Extracting packages [ 190s] /usr/sbin/powertop differs in ELF section .rodata [ 190s] --- /tmp/tmp.IygDop6421/tmp.vDfjTb6520 2016-12-09 16:27:21.325784308 +0000 [ 190s] +++ /tmp/tmp.IygDop6421/tmp.LZzfgX6522 2016-12-09 16:27:21.333784308 +0000 [ 190s] @@ -1885,7 +1885,7 @@ [ 190s] 4536f8 00000000 00000000 63683a43 3a693a74 ........ch:C:i:t [ 190s] 453708 3a755677 3a710000 506f7765 72544f50 :uVw:q..PowerTOP [ 190s] 453718 20766572 73696f6e 76322e35 2c20636f versionv2.5, co [ 190s] - 453728 6d70696c 6564206f 6e204e6f 76202039 mpiled on Nov 9 [ 190s] + 453728 6d70696c 6564206f 6e204465 63202039 mpiled on Dec 9 [ 190s] 453738 20323031 360a0000 55736167 653a2070 2016...Usage: p [ 190s] 453748 6f776572 746f7020 5b4f5054 494f4e53 owertop [OPTIONS [ 190s] 453758 5d000000 00000000 25730a0a 00000000 ].......%s...... [ 190s] compare /.build.oldpackages/powertop-debuginfo-2.5-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/powertop-debuginfo-2.5-1.2.aarch64.rpm [ 190s] skipping -debuginfo package [ 190s] compare /.build.oldpackages/powertop-debugsource-2.5-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/powertop-debugsource-2.5-1.2.aarch64.rpm [ 190s] Comparing powertop-debugsource-2.5-1.1.aarch64.rpm to powertop-debugsource-2.5-1.2.aarch64.rpm [ 190s] This is not a prerelease project. Compare the project name. [ 190s] comparing rpmtags [ 190s] comparing RELEASE [ 190s] comparing PROVIDES [ 190s] comparing scripts [ 190s] comparing filelist [ 190s] comparing file checksum [ 190s] creating rename script [ 190s] RPM meta information is identical [ 190s] compare /.build.oldpackages/powertop-docs-2.5-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/powertop-docs-2.5-1.2.aarch64.rpm [ 190s] Comparing powertop-docs-2.5-1.1.aarch64.rpm to powertop-docs-2.5-1.2.aarch64.rpm [ 190s] This is not a prerelease project. Compare the project name. [ 190s] comparing rpmtags [ 190s] comparing RELEASE [ 191s] comparing PROVIDES [ 191s] comparing scripts [ 191s] comparing filelist [ 191s] comparing file checksum [ 191s] creating rename script [ 191s] RPM meta information is identical [ 191s] compare /.build.oldpackages/powertop-locale-2.5-1.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.2.noarch.rpm [ 191s] Comparing powertop-locale-2.5-1.1.noarch.rpm to powertop-locale-2.5-1.2.noarch.rpm [ 191s] This is not a prerelease project. Compare the project name. [ 191s] comparing rpmtags [ 191s] comparing RELEASE [ 191s] comparing PROVIDES [ 191s] comparing scripts [ 191s] comparing filelist [ 191s] comparing file checksum [ 191s] creating rename script [ 191s] RPM meta information is identical [ 191s] do not compare rpmlint.log if it is a prerelease project! [ 191s] ... saving built statistics [ 191s] ... saving built packages [ 191s] /home/abuild/rpmbuild/RPMS/aarch64/powertop-2.5-1.2.aarch64.rpm [ 191s] /home/abuild/rpmbuild/RPMS/aarch64/powertop-debuginfo-2.5-1.2.aarch64.rpm [ 191s] /home/abuild/rpmbuild/RPMS/aarch64/powertop-debugsource-2.5-1.2.aarch64.rpm [ 191s] /home/abuild/rpmbuild/RPMS/aarch64/powertop-docs-2.5-1.2.aarch64.rpm [ 191s] /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-1.2.noarch.rpm [ 191s] /home/abuild/rpmbuild/SRPMS/powertop-2.5-1.2.src.rpm [ 191s] /home/abuild/rpmbuild/OTHER/_statistics [ 191s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 191s] [ 191s] w17 finished "build powertop.spec" at Fri Dec 9 16:27:23 UTC 2016. [ 191s] [ 195s] [ 169.176187] SysRq : Power Off [ 195s] [ 169.183766] Power down. [ 195s] build: extracting built packages... [ 195s] powertop-2.5-1.2.aarch64.rpm [ 195s] powertop-debuginfo-2.5-1.2.aarch64.rpm [ 195s] powertop-debugsource-2.5-1.2.aarch64.rpm [ 195s] powertop-docs-2.5-1.2.aarch64.rpm [ 195s] powertop-locale-2.5-1.2.noarch.rpm [ 195s] powertop-2.5-1.2.src.rpm [ 195s] _statistics [ 195s] rpmlint.log