[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw20 started "build _service:gbs:capi-network-serial.spec" at Sat Apr 22 21:18:11 UTC 2017. [ 0s] [ 0s] Building capi-network-serial for project 'Tizen:3.0:Wearable' repository 'emulator-circle' arch 'i586' srcmd5 '72b0eca3401680b1a377eabd7e9c2320' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:capi-network-serial.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] running setup postinstall script [ 2s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 2s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 2s] initializing rpm db... [ 2s] reordering...cycle: gio-branding-upstream -> libgio [ 2s] breaking dependency libgio -> gio-branding-upstream [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 2s] [1/118] installing libmagic-data-5.28-1.16 [ 2s] [2/118] installing setup-0.9-1.8 [ 2s] [3/118] installing terminfo-base-5.9-1.19 [ 2s] [4/118] installing filesystem-3.1-1.2 [ 2s] [5/118] installing glibc-2.20-1.2 [ 3s] [6/118] installing bash-3.2.57-2.1 [ 3s] [7/118] installing capi-base-common-0.4.12-1.1 [ 3s] [8/118] installing cpio-2.11-1.3 [ 3s] [9/118] installing diffutils-3.3-1.3 [ 3s] [10/118] installing findutils-4.3.8-1.17 [ 3s] [11/118] installing hostname-3.12-1.3 [ 3s] [12/118] installing libatomic-4.9.2-1.6 [ 3s] [13/118] installing libattr-2.4.47-1.17 [ 3s] [14/118] installing libbz2-1.0.6-1.39 [ 3s] [15/118] installing libcap-2.24-1.17 [ 3s] [16/118] installing libelf-0.153-1.25 [ 3s] [17/118] installing libelf0-0.8.13-1.3 [ 3s] [18/118] installing libexpat-2.2.0-1.17 [ 3s] [19/118] installing libext2fs-1.42.13-1.2 [ 3s] [20/118] installing libffi-3.1-1.3 [ 3s] [21/118] installing libfreebl3-3.23-1.35 [ 3s] [22/118] installing libgcc-4.9.2-1.6 [ 3s] [23/118] installing libgomp-4.9.2-1.6 [ 3s] [24/118] installing libitm-4.9.2-1.6 [ 3s] [25/118] installing libltdl-2.4.2-1.23 [ 3s] [26/118] installing liblua-5.1.4-1.7 [ 3s] [27/118] installing liblzma-5.2.2-1.19 [ 3s] [28/118] installing libpcre-8.39-1.3 [ 3s] [29/118] installing libpopt-1.16-1.5 [ 4s] [30/118] installing libpython-2.7.8-1.11 [ 4s] [31/118] installing libsmack-1.3.0-1.15 [ 4s] [32/118] installing libsmartcols-2.28-1.3 [ 4s] [33/118] installing libsqlite-3.8.10.2-1.5 [ 4s] [34/118] installing libuuid-2.28-1.3 [ 4s] [35/118] installing m4-1.4.17-1.3 [ 4s] [36/118] installing net-tools-2.0_20121208git-1.3 [ 4s] [37/118] installing nspr-4.12-1.10 [ 4s] [38/118] installing patch-2.7-1.5 [ 4s] [39/118] installing pkg-config-0.28-1.21 [ 4s] [40/118] installing sed-4.1c-1.3 [ 4s] [41/118] installing update-alternatives-1.16.3-1.3 [ 4s] [42/118] installing which-2.20-1.3 [ 4s] [43/118] installing zlib-1.2.8-1.22 [ 4s] [44/118] installing libncurses-5.9-1.19 [ 4s] [45/118] installing build-compare-2015.04.28-1.15 [ 4s] [46/118] installing capi-base-common-devel-0.4.12-1.1 [ 4s] [47/118] installing coreutils-6.9-1.3 [ 4s] [48/118] installing cpp-4.9.2-1.6 [ 5s] [49/118] installing gawk-3.1.5-1.3 [ 5s] [50/118] installing gcc-c++-4.9.2-1.6 [ 6s] [51/118] installing grep-2.5.2-1.3 [ 6s] [52/118] installing less-466-1.3 [ 6s] [53/118] installing libacl-2.2.52-1.17 [ 6s] [54/118] installing libasm-0.153-1.25 [ 6s] [55/118] installing libblkid-2.28-1.3 [ 6s] [56/118] installing libglib-2.44.1-1.1 [ 6s] [57/118] installing libopenssl-1.0.2j-1.21 [ 6s] [58/118] installing libpcreposix-8.39-1.3 [ 6s] [59/118] installing libreadline-5.2-1.18 [ 6s] [60/118] installing libstdc++-4.9.2-1.6 [ 6s] [61/118] installing make-4.0-1.5 [ 6s] [62/118] installing nss-certs-3.23-1.35 [ 7s] [63/118] installing smack-1.3.0-1.15 [ 7s] [64/118] installing binutils-2.25-1.12 [ 7s] [65/118] installing bzip2-1.0.6-1.39 [ 7s] [66/118] installing libmagic-5.28-1.16 [ 7s] [67/118] installing libxml2-2.9.4-2.15 [ 7s] [68/118] installing xz-5.2.2-1.19 [ 7s] [69/118] installing libdw-0.153-1.25 [ 7s] [70/118] installing libstdc++-devel-4.9.2-1.6 [ 7s] [71/118] installing file-5.28-1.16 [ 8s] [72/118] installing libgmodule-2.44.1-1.1 [ 8s] [73/118] installing libgthread-2.44.1-1.1 [ 8s] [74/118] installing libmount-2.28-1.3 [ 8s] [75/118] installing linux-glibc-devel-3.10-1.24 [ 8s] [76/118] installing tar-1.17-1.3 [ 8s] [77/118] installing db4-4.8.30.NC-1.25 [ 8s] [78/118] installing glibc-locale-2.20-1.2 [ 8s] [79/118] installing gzip-1.3.12-1.17 [ 8s] [80/118] installing libcilkrts-4.9.2-1.6 [ 8s] [81/118] installing libfdisk1-2.28-1.3 [ 8s] [82/118] installing libgobject-2.44.1-1.1 [ 9s] [83/118] installing libubsan-4.9.2-1.6 [ 9s] [84/118] installing pam-1.1.6-1.2 [ 9s] [85/118] installing libpcrecpp-8.39-1.3 [ 9s] [86/118] installing tzdata-2016i-1.1 [ 9s] [87/118] installing elfutils-0.153-1.25 [ 9s] [88/118] installing shared-mime-info-1.3-1.1 [ 13s] [89/118] installing libarchive-3.1.2-1.3 [ 13s] [90/118] installing glibc-devel-2.20-1.2 [ 13s] [91/118] installing perl-5.20.0-1.28 [ 14s] [92/118] installing libsystemd-219-1.1 [ 15s] [93/118] installing pcre-devel-8.39-1.3 [ 15s] [94/118] installing cmake-2.8.12.2-1.3 [ 15s] [95/118] installing gcc-4.9.2-1.6 [ 16s] [96/118] installing python-2.7.8-1.11 [ 17s] [97/118] installing util-linux-2.28-1.3 [ 17s] [98/118] installing build-mkbaselibs-20120927-1.3 [ 17s] [99/118] installing autoconf-2.69-1.24 [ 17s] [100/118] installing dbus-libs-1.10.6-1.1 [ 17s] [101/118] installing python-xml-2.7.8-1.11 [ 17s] [102/118] installing util-linux-su-2.28-1.3 [ 17s] [103/118] installing libdlog-0.5.1-1.1 [ 18s] [104/118] installing dbus-devel-1.10.6-1.1 [ 18s] [105/118] installing libdlog-devel-0.5.1-1.1 [ 18s] [106/118] installing automake-1.14.1-1.21 [ 18s] [107/118] installing build-20120927-1.3 [ 18s] [108/118] installing libtool-2.4.2-1.23 [ 18s] [109/118] installing nss-3.23-1.35 [ 18s] [110/118] installing libgio-2.44.1-1.1 [ 18s] [111/118] installing gio-branding-upstream-2.44.1-1.1 [ 18s] [112/118] installing dbus-glib-0.100.2-1.1 [ 18s] [113/118] installing libsoftokn3-3.23-1.35 [ 18s] [114/118] installing glib2-tools-2.44.1-1.1 [ 18s] [115/118] installing rpm-4.11.0.1-1.17 [ 18s] [116/118] installing glib2-devel-2.44.1-1.1 [ 18s] [117/118] installing rpm-build-4.11.0.1-1.17 [ 18s] [118/118] installing dbus-glib-devel-0.100.2-1.1 [ 19s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 19s] now finalizing build dir... [ 19s] build target is i686-tizen-linux [ 19s] ----------------------------------------------------------------- [ 19s] I have the following modifications for capi-network-serial.spec: [ 19s] 5c5 [ 19s] < Release: 0 [ 19s] --- [ 19s] > Release: 1.1 [ 19s] 59a60 [ 19s] > %changelog [ 19s] ----------------------------------------------------------------- [ 19s] ----- building capi-network-serial.spec (user abuild) [ 19s] ----------------------------------------------------------------- [ 19s] ----------------------------------------------------------------- [ 19s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/emulator-circle/72b0eca3401680b1a377eabd7e9c2320-capi-network-serial' -ba /home/abuild/rpmbuild/SOURCES/capi-network-serial.spec [ 19s] Building target platforms: i686-tizen-linux [ 19s] Building for target i686-tizen-linux [ 19s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qO2zrA [ 19s] + umask 022 [ 19s] + cd /home/abuild/rpmbuild/BUILD [ 19s] + cd /home/abuild/rpmbuild/BUILD [ 19s] + rm -rf capi-network-serial-0.0.7 [ 19s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-serial-0.0.7.tar.gz [ 19s] + /bin/tar -xf - [ 19s] + STATUS=0 [ 19s] + '[' 0 -ne 0 ']' [ 19s] + cd capi-network-serial-0.0.7 [ 19s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 19s] + cp /home/abuild/rpmbuild/SOURCES/capi-network-serial.manifest . [ 19s] + exit 0 [ 19s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qKGWan [ 19s] + umask 022 [ 19s] + cd /home/abuild/rpmbuild/BUILD [ 19s] + cd capi-network-serial-0.0.7 [ 19s] ++ uname -m [ 19s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 19s] + LANG=C [ 19s] + export LANG [ 19s] + unset DISPLAY [ 19s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 19s] + export CFLAGS [ 19s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 19s] + export CXXFLAGS [ 19s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 19s] + export FFLAGS [ 19s] + LDFLAGS= [ 19s] + export LDFLAGS [ 19s] + LD_AS_NEEDED=1 [ 19s] + export LD_AS_NEEDED [ 19s] ++ echo 0.0.7 [ 19s] ++ awk 'BEGIN {FS="."}{print $1}' [ 19s] + MAJORVER=0 [ 19s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 19s] + export CFLAGS [ 19s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 19s] + export CXXFLAGS [ 19s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 19s] + export FFLAGS [ 19s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.0.7 -DMAJORVER=0 [ 19s] -- The C compiler identification is GNU 4.9.2 [ 19s] -- The CXX compiler identification is GNU 4.9.2 [ 19s] -- Check for working C compiler: /bin/cc [ 19s] -- Check for working C compiler: /bin/cc -- works [ 19s] -- Detecting C compiler ABI info [ 19s] -- Detecting C compiler ABI info - done [ 19s] -- Check for working CXX compiler: /bin/c++ [ 19s] -- Check for working CXX compiler: /bin/c++ -- works [ 19s] -- Detecting CXX compiler ABI info [ 20s] -- Detecting CXX compiler ABI info - done [ 20s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 20s] -- checking for module 'dlog glib-2.0 capi-base-common dbus-glib-1' [ 20s] -- found dlog glib-2.0 capi-base-common dbus-glib-1, version 1.0;2.44.1;0.4.12;0.100.2 [ 20s] -- Configuring done [ 20s] -- Generating done [ 20s] CMake Warning: [ 20s] Manually-specified variables were not used by the project: [ 20s] [ 20s] CMAKE_INSTALL_LIBDIR [ 20s] INCLUDE_INSTALL_DIR [ 20s] SHARE_INSTALL_PREFIX [ 20s] SYSCONF_INSTALL_DIR [ 20s] [ 20s] [ 20s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 [ 20s] + make -j4 [ 20s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 -B/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 --check-build-system CMakeFiles/Makefile.cmake 0 [ 20s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/progress.marks [ 20s] make -f CMakeFiles/Makefile2 all [ 20s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/depend [ 20s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] cd /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/capi-network-serial.dir/DependInfo.cmake --color= [ 20s] Scanning dependencies of target capi-network-serial [ 20s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/build [ 20s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 1 [ 20s] [100%] Building C object CMakeFiles/capi-network-serial.dir/src/serial.c.o [ 20s] /bin/cc -DPREFIX=\"/usr\" -DTIZEN_DEBUG -Dcapi_network_serial_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I/usr/include/dlog -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fPIC -Wall -Werror -fPIC -I/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/include -o CMakeFiles/capi-network-serial.dir/src/serial.c.o -c /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/src/serial.c [ 20s] Linking C shared library libcapi-network-serial.so [ 20s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-network-serial.dir/link.txt --verbose=1 [ 20s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I/usr/include/dlog -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fPIC -Wall -Werror -shared -Wl,-soname,libcapi-network-serial.so.0 -o libcapi-network-serial.so.0.0.7 CMakeFiles/capi-network-serial.dir/src/serial.c.o -ldlog -lcapi-base-common -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 [ 20s] /usr/bin/cmake -E cmake_symlink_library libcapi-network-serial.so.0.0.7 libcapi-network-serial.so.0 libcapi-network-serial.so [ 20s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 1 [ 20s] [100%] Built target capi-network-serial [ 20s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 0 [ 20s] + exit 0 [ 20s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.xgFXec [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd capi-network-serial-0.0.7 [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 [ 20s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 install [ 20s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 -B/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 --check-build-system CMakeFiles/Makefile.cmake 0 [ 20s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/progress.marks [ 20s] /bin/make -f CMakeFiles/Makefile2 all [ 20s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /bin/make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/depend [ 20s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] cd /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/capi-network-serial.dir/DependInfo.cmake --color= [ 20s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /bin/make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/build [ 20s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] make[2]: Nothing to be done for 'CMakeFiles/capi-network-serial.dir/build'. [ 20s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 1 [ 20s] [100%] Built target capi-network-serial [ 20s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 0 [ 20s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 20s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] make[1]: Nothing to be done for 'preinstall'. [ 20s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 20s] Install the project... [ 20s] /usr/bin/cmake -P cmake_install.cmake [ 20s] -- Install configuration: "" [ 20s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/lib/libcapi-network-serial.so.0.0.7 [ 20s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/lib/libcapi-network-serial.so.0 [ 20s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/lib/libcapi-network-serial.so [ 20s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/include/network [ 20s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/include/network/serial.h [ 20s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/lib/pkgconfig/capi-network-serial.pc [ 20s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/share/info/dir [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 -regex '.*\.la$' [ 20s] + xargs rm -f -- [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 -regex '.*\.a$' [ 20s] + xargs rm -f -- [ 20s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 [ 20s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386/usr/lib/libcapi-network-serial.so.0.0.7 [ 20s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 20s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 20s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 20s] 38 blocks [ 20s] + /usr/lib/rpm/check-buildroot [ 20s] + /usr/lib/rpm//brp-compress [ 20s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 20s] + /usr/lib/rpm/brp-python-hardlink [ 20s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 [ 20s] Processing files: capi-network-serial-0.0.7-1.1.i686 [ 20s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 20s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 20s] [ 20s] Provides: capi-network-serial = 0.0.7-1.1 capi-network-serial(x86-32) = 0.0.7-1.1 libcapi-network-serial.so.0 [ 20s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 20s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 20s] Requires(post): /sbin/ldconfig [ 20s] Requires(postun): /sbin/ldconfig [ 20s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-1.so.3(LIBDBUS_1_3) libdbus-glib-1.so.2 libdlog.so.0 libglib-2.0.so.0 [ 20s] Processing files: capi-network-serial-debugsource-0.0.7-1.1.i686 [ 20s] Provides: capi-network-serial-debugsource = 0.0.7-1.1 capi-network-serial-debugsource(x86-32) = 0.0.7-1.1 [ 20s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 20s] Processing files: capi-network-serial-devel-0.0.7-1.1.i686 [ 20s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 20s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 20s] [ 20s] Provides: capi-network-serial-devel = 0.0.7-1.1 capi-network-serial-devel(x86-32) = 0.0.7-1.1 pkgconfig(capi-network-serial) [ 20s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 20s] Requires: /usr/bin/pkg-config libcapi-network-serial.so.0 pkgconfig(capi-base-common) [ 20s] Processing files: capi-network-serial-debuginfo-0.0.7-1.1.i686 [ 20s] Provides: capi-network-serial-debuginfo = 0.0.7-1.1 capi-network-serial-debuginfo(x86-32) = 0.0.7-1.1 [ 20s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 20s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 [ 20s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-1.1.src.rpm [ 20s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-0.0.7-1.1.i686.rpm [ 20s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-debugsource-0.0.7-1.1.i686.rpm [ 20s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-devel-0.0.7-1.1.i686.rpm [ 20s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-debuginfo-0.0.7-1.1.i686.rpm [ 20s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.0NYljb [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd capi-network-serial-0.0.7 [ 20s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-1.1.i386 [ 20s] + exit 0 [ 20s] ... checking for files with abuild user/group [ 20s] ... creating baselibs [ 20s] [ 20s] obsnw20 finished "build capi-network-serial.spec" at Sat Apr 22 21:18:31 UTC 2017. [ 20s] Retried build at Fri May 26 11:18:55 2017 returned same result, skipped Retried build at Wed May 31 23:18:16 2017 returned same result, skipped Retried build at Thu Jun 1 23:59:44 2017 returned same result, skipped Retried build at Thu Jun 8 07:15:05 2017 returned same result, skipped Retried build at Fri Jun 9 08:32:01 2017 returned same result, skipped Retried build at Wed Jun 14 03:22:03 2017 returned same result, skipped Retried build at Wed Jun 14 22:41:19 2017 returned same result, skipped Retried build at Mon Jun 19 08:01:20 2017 returned same result, skipped Retried build at Tue Jun 20 10:22:59 2017 returned same result, skipped Retried build at Wed Jul 5 23:08:00 2017 returned same result, skipped Retried build at Fri Jul 14 04:29:29 2017 returned same result, skipped Retried build at Tue Aug 8 07:05:03 2017 returned same result, skipped Retried build at Thu Oct 19 10:40:15 2017 returned same result, skipped Retried build at Wed Nov 8 00:01:26 2017 returned same result, skipped