[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw10 started "build _service:gbs:at-spi2-atk.spec" at Tue Jul 11 22:46:52 UTC 2017. [ 0s] [ 0s] Building at-spi2-atk for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '10312ad1f3b9ec189e079619fd6b9235' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:at-spi2-atk.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:at-spi2-atk.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:at-spi2-atk.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling tar... [ 6s] [35/40] preinstalling libmount... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 7s] reordering...cycle: gio-branding-upstream -> libgio [ 7s] breaking dependency libgio -> gio-branding-upstream [ 7s] cycle: efl -> eina [ 7s] breaking dependency efl -> eina [ 7s] cycle: eo -> efl [ 7s] breaking dependency eo -> efl [ 7s] cycle: eo -> eina -> efl [ 7s] breaking dependency eo -> eina [ 7s] cycle: ecore -> eeze [ 7s] breaking dependency ecore -> eeze [ 7s] cycle: ecore -> eldbus [ 7s] breaking dependency ecore -> eldbus [ 7s] cycle: ecore -> evas [ 7s] breaking dependency evas -> ecore [ 7s] cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/192] installing default-ac-domains-0.1-1.1 [ 7s] [2/192] installing libmagic-data-5.28-2.9 [ 7s] [3/192] installing setup-0.9-2.2 [ 7s] [4/192] installing terminfo-base-5.9-1.28 [ 7s] [5/192] installing typelib-1_0-Atspi-2_0-2.16.1-2.1 [ 7s] [6/192] installing filesystem-3.1-1.2 [ 7s] [7/192] installing glibc-2.20-2.3 [ 7s] [8/192] installing libatomic-4.9.2-1.10 [ 7s] [9/192] installing libgcc-4.9.2-1.10 [ 7s] [10/192] installing libgomp-4.9.2-1.10 [ 7s] [11/192] installing bash-3.2.57-2.1 [ 7s] [12/192] installing capi-base-common-0.4.12-1.1 [ 7s] [13/192] installing cpio-2.11-1.3 [ 7s] [14/192] installing diffutils-3.3-1.3 [ 8s] [15/192] installing findutils-4.3.8-1.29 [ 8s] [16/192] installing fribidi-0.19.7-1.1 [ 8s] [17/192] installing gdbm-1.8.3-1.3 [ 8s] [18/192] installing giflib-5.1.2-1.1 [ 8s] [19/192] installing hostname-3.12-1.3 [ 8s] [20/192] installing iniparser-3.2-1.1 [ 8s] [21/192] installing libattr-2.4.47-1.28 [ 8s] [22/192] installing libbz2-1.0.6-1.50 [ 8s] [23/192] installing libcap-2.24-1.28 [ 8s] [24/192] installing libdrm-2.4.58-1.1 [ 8s] [25/192] installing libelf-0.153-1.30 [ 8s] [26/192] installing libelf0-0.8.13-1.3 [ 8s] [27/192] installing libevdev-1.2.2-1.1 [ 8s] [28/192] installing libexpat-2.2.0-1.27 [ 8s] [29/192] installing libext2fs-1.42.13-1.3 [ 8s] [30/192] installing libffi-3.1-1.3 [ 8s] [31/192] installing libfreebl3-3.23-1.44 [ 8s] [32/192] installing libhyphen-2.8.8-1.1 [ 8s] [33/192] installing libitm-4.9.2-1.10 [ 8s] [34/192] installing libjpeg-8.0.2-1.4 [ 9s] [35/192] installing libjson-0.12-1.1 [ 9s] [36/192] installing libltdl-2.4.2-1.32 [ 9s] [37/192] installing liblua-5.1.4-1.8 [ 9s] [38/192] installing liblzma-5.2.2-1.24 [ 9s] [39/192] installing libmtdev-1.1.5-1.1 [ 9s] [40/192] installing libogg-1.3.2-1.1 [ 9s] [41/192] installing libpcre-8.39-1.3 [ 9s] [42/192] installing libpopt-1.16-1.8 [ 9s] [43/192] installing libpython-2.7.8-1.14 [ 9s] [44/192] installing libsmack-1.3.0-2.7 [ 9s] [45/192] installing libsmartcols-2.28-2.1 [ 9s] [46/192] installing libsqlite-3.8.10.2-1.8 [ 9s] [47/192] installing libstdc++-4.9.2-1.10 [ 9s] [48/192] installing libuuid-2.28-2.1 [ 9s] [49/192] installing libwayland-egl-1.0-2.1 [ 9s] [50/192] installing libxkbcommon-0.4.3-1.1 [ 9s] [51/192] installing m4-1.4.17-1.3 [ 9s] [52/192] installing net-tools-2.0_20121208git-1.3 [ 9s] [53/192] installing nspr-4.12-1.13 [ 9s] [54/192] installing patch-2.7-1.8 [ 10s] [55/192] installing pixman-0.32.6-1.1 [ 10s] [56/192] installing pkg-config-0.28-1.31 [ 10s] [57/192] installing sed-4.1c-1.3 [ 10s] [58/192] installing update-alternatives-1.16.3-1.3 [ 10s] [59/192] installing which-2.20-1.3 [ 10s] [60/192] installing xdgmime-0.0.12-1.1 [ 10s] [61/192] installing zlib-1.2.8-1.32 [ 10s] [62/192] installing libncurses-5.9-1.28 [ 10s] [63/192] installing shadow-utils-4.1.4.2-1.2 [ 10s] [64/192] installing build-compare-2015.04.28-1.22 [ 10s] [65/192] installing libstdc++-devel-4.9.2-1.10 [ 10s] [66/192] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 11s] [67/192] installing cpp-4.9.2-1.10 [ 12s] [68/192] installing gcc-c++-4.9.2-1.10 [ 12s] [69/192] installing pkgmgr-0.2.91-3.1 [ 13s] /var/tmp/rpm-tmp.PsBCx4: line 9: /etc/tizen-platform.conf: No such file or directory [ 13s] warning: %post(pkgmgr-0.2.91-3.1.armv7l) scriptlet failed, exit status 1 [ 13s] [70/192] installing binutils-2.25-1.11 [ 13s] [71/192] installing coreutils-6.9-1.3 [ 13s] [72/192] installing db4-4.8.30.NC-1.35 [ 13s] [73/192] installing gawk-3.1.5-1.3 [ 13s] [74/192] installing grep-2.5.2-1.3 [ 13s] [75/192] installing less-466-1.3 [ 13s] [76/192] installing libacl-2.2.52-1.29 [ 13s] [77/192] installing libasm-0.153-1.30 [ 13s] [78/192] installing libblkid-2.28-2.1 [ 13s] [79/192] installing libcap-tools-2.24-1.28 [ 13s] [80/192] installing libglib-2.44.1-1.1 [ 13s] [81/192] installing libopenssl-1.0.2j-1.29 [ 14s] [82/192] installing libpcreposix-8.39-1.3 [ 14s] [83/192] installing libpng-1.6.21-1.1 [ 14s] [84/192] installing libreadline-5.2-1.27 [ 14s] [85/192] installing libubsan-4.9.2-1.10 [ 14s] [86/192] installing libvorbis-1.3.4-1.1 [ 14s] [87/192] installing make-4.0-1.8 [ 14s] [88/192] installing minizip-1.2.8-1.32 [ 14s] [89/192] installing nss-certs-3.23-1.44 [ 14s] [90/192] installing smack-1.3.0-2.7 [ 14s] [91/192] installing bzip2-1.0.6-1.50 [ 14s] [92/192] installing gettext-runtime-0.19.7-1.15 [ 14s] [93/192] installing libicu-57.1-1.1 [ 15s] [94/192] installing libmagic-5.28-2.9 [ 15s] [95/192] installing libpcrecpp-8.39-1.3 [ 15s] [96/192] installing libxml2-2.9.4-2.24 [ 15s] [97/192] installing ttrace-1.0.3-2.1 [ 15s] [98/192] installing xz-5.2.2-1.24 [ 15s] [99/192] installing cynara-db-migration-0.14.10-1.1 [ 15s] [100/192] installing libdw-0.153-1.30 [ 15s] [101/192] installing libtiff-4.0.7-2.1 [ 15s] [102/192] installing linux-glibc-devel-3.10-1.33 [ 16s] [103/192] installing file-5.28-2.9 [ 16s] [104/192] installing glibc-locale-2.20-2.3 [ 16s] [105/192] installing libgmodule-2.44.1-1.1 [ 16s] [106/192] installing libgthread-2.44.1-1.1 [ 16s] [107/192] installing security-config-1.0-4.1 [ 22s] usermod: user 'buxton' does not exist [ 22s] usermod: user 'dbus' does not exist [ 22s] [108/192] installing tar-1.17-1.3 [ 22s] [109/192] installing tizen-platform-config-2.2-1.1 [ 23s] [110/192] installing gzip-1.3.12-1.28 [ 23s] [111/192] installing libfdisk1-2.28-2.1 [ 23s] [112/192] installing libfreetype-2.6.5-1.1 [ 23s] [113/192] installing libgobject-2.44.1-1.1 [ 23s] [114/192] installing libmount-2.28-2.1 [ 23s] [115/192] installing libsndfile-1.0.26-3.1 [ 23s] [116/192] installing pam-1.1.6-1.2 [ 24s] [117/192] installing perl-5.20.0-1.33 [ 25s] [118/192] installing tzdata-2016i-1.1 [ 25s] [119/192] installing pcre-devel-8.39-1.3 [ 25s] [120/192] installing elfutils-0.153-1.30 [ 25s] [121/192] installing gcc-4.9.2-1.10 [ 26s] [122/192] installing libcynara-commons-0.14.10-1.1 [ 26s] [123/192] installing shared-mime-info-1.3-1.1 [ 33s] [124/192] installing python-2.7.8-1.14 [ 34s] [125/192] installing build-mkbaselibs-20120927-1.3 [ 34s] [126/192] installing glibc-devel-2.20-2.3 [ 34s] [127/192] installing qemu-accel-x86_64-armv7l-0.4-1.7 [ 38s] [128/192] installing autoconf-2.69-1.35 [ 38s] [129/192] installing libtzplatform-config-2.2-1.1 [ 38s] [130/192] installing libatk-2.16.0-1.1 [ 38s] [131/192] installing libcynara-client-0.14.10-1.1 [ 38s] [132/192] installing libcynara-session-0.14.10-1.1 [ 38s] [133/192] installing python-xml-2.7.8-1.14 [ 38s] [134/192] installing gettext-tools-0.19.7-1.15 [ 39s] [135/192] installing libsystemd-219-7.1 [ 39s] [136/192] installing libharfbuzz-1.3.0-1.1 [ 39s] [137/192] installing fontconfig-2.12.1-1.1 [ 39s] [138/192] installing util-linux-2.28-2.1 [ 39s] [139/192] installing automake-1.14.1-1.30 [ 39s] [140/192] installing dbus-libs-1.10.6-2.1 [ 39s] [141/192] installing util-linux-su-2.28-2.1 [ 39s] [142/192] installing build-20120927-1.3 [ 39s] [143/192] installing libdlog-0.5.1-1.1 [ 39s] [144/192] installing libinput-0.11.0-3.1 [ 39s] [145/192] installing dbus-devel-1.10.6-2.1 [ 40s] [146/192] installing coregl-0.1.10-1.10 [ 40s] [147/192] installing libtool-2.4.2-1.32 [ 40s] [148/192] installing libwayland-client-1.10.0-2.1 [ 40s] [149/192] installing libwayland-server-1.10.0-2.1 [ 40s] [150/192] installing libatspi0-2.16.1-2.1 [ 40s] [151/192] installing libslp-db-util-0.1.1-1.1 [ 40s] [152/192] installing libpulse-5.0-2.1 [ 40s] [153/192] installing capi-system-info-0.2.0-1.1 [ 40s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 40s] iniparser: cannot open /etc/info.ini [ 40s] [154/192] installing dbus-1.10.6-2.1 [ 40s] [155/192] installing libwayland-extension-client-1.1.20-8.1 [ 40s] [156/192] installing libwayland-cursor-1.10.0-2.1 [ 40s] [157/192] installing libtbm-2.0.24-10.1 [ 40s] [158/192] installing libwayland-tbm-client-0.1.21-3.1 [ 41s] [159/192] installing libwayland-tbm-server-0.1.21-3.1 [ 41s] [160/192] installing libtdm-1.7.0-8.1 [ 41s] [161/192] installing libgbm-1.0-1.1 [ 41s] [162/192] installing libtdm-client-1.7.0-8.1 [ 41s] [163/192] installing eo-1.16.0-6.2 [ 41s] [164/192] installing nss-3.23-1.44 [ 41s] [165/192] installing libgio-2.44.1-1.1 [ 41s] [166/192] installing gio-branding-upstream-2.44.1-1.1 [ 41s] [167/192] installing efl-1.16.0-6.2 [ 41s] [168/192] installing libjson-glib-1.2.0-1.1 [ 41s] [169/192] installing libsoftokn3-3.23-1.44 [ 41s] [170/192] installing glib2-tools-2.44.1-1.1 [ 41s] [171/192] installing rpm-4.11.0.1-2.6 [ 41s] [172/192] installing buxton2-1.2.0-5.1 [ 43s] warning: user buxton does not exist - using root [ 43s] warning: group buxton does not exist - using root [ 43s] warning: user buxton does not exist - using root [ 43s] warning: group buxton does not exist - using root [ 43s] Running buxton2 %posttrans script [ 43s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 43s] /etc/buxton2/*: No such file or directory [ 43s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 43s] /var/lib/buxton2/*: No such file or directory [ 43s] [173/192] installing bundle-0.1.31-1.1 [ 43s] [174/192] installing eina-1.16.0-6.2 [ 43s] [175/192] installing vconf-compat-1.2.0-5.1 [ 43s] [176/192] installing glib2-devel-2.44.1-1.1 [ 43s] [177/192] installing rpm-build-4.11.0.1-2.6 [ 43s] [178/192] installing atk-devel-2.16.0-1.1 [ 43s] [179/192] installing ector-1.16.0-6.2 [ 43s] [180/192] installing emile-1.16.0-6.2 [ 43s] [181/192] installing libstorage-0.1.1-3.1 [ 43s] [182/192] installing pkgmgr-info-0.1.2-6.1 [ 43s] [183/192] installing eet-1.16.0-6.2 [ 43s] [184/192] installing pkgmgr-installer-0.2.91-3.1 [ 43s] [185/192] installing aul-0.1.0-10.1 [ 43s] [186/192] installing evas-1.16.0-6.2 [ 44s] [187/192] installing ecore-1.16.0-6.2 [ 44s] [188/192] installing app-svc-0.1.53-1.1 [ 44s] [189/192] installing eldbus-1.16.0-6.2 [ 44s] [190/192] installing eeze-1.16.0-6.2 [ 44s] [191/192] installing at-spi2-core-2.16.1-2.1 [ 44s] [192/192] installing at-spi2-core-devel-2.16.1-2.1 [ 44s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 44s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for at-spi2-atk.spec: [ 45s] 4c4 [ 45s] < Release: 1 [ 45s] --- [ 45s] > Release: 3.1 [ 45s] 18c18 [ 45s] < BuildRequires: gettext [ 45s] --- [ 45s] > BuildRequires: gettext-tools [ 45s] ----------------------------------------------------------------- [ 45s] ----- building at-spi2-atk.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 45s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/10312ad1f3b9ec189e079619fd6b9235-at-spi2-atk' -ba /home/abuild/rpmbuild/SOURCES/at-spi2-atk.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.JttyJP [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf at-spi2-atk-2.16.0 [ 45s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/at-spi2-atk-2.16.0.tar.xz [ 45s] + /bin/tar -xf - [ 45s] + STATUS=0 [ 45s] + '[' 0 -ne 0 ']' [ 45s] + cd at-spi2-atk-2.16.0 [ 45s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 45s] + echo 'Patch #0 (7a0d4ab-to-41834d4.diff):' [ 45s] Patch #0 (7a0d4ab-to-41834d4.diff): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/7a0d4ab-to-41834d4.diff [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file atk-adaptor/accessible-stateset.c [ 45s] patching file atk-adaptor/adaptors/accessible-adaptor.c [ 45s] patching file atk-adaptor/adaptors/action-adaptor.c [ 45s] patching file atk-adaptor/adaptors/collection-adaptor.c [ 45s] patching file atk-adaptor/adaptors/component-adaptor.c [ 45s] patching file atk-adaptor/adaptors/socket-adaptor.c [ 45s] patching file atk-adaptor/bridge.c [ 45s] patching file atk-adaptor/event.c [ 45s] patching file atk-adaptor/introspection.c [ 45s] patching file atk-adaptor/object.c [ 45s] patching file droute/droute.c [ 45s] + cp /home/abuild/rpmbuild/SOURCES/at-spi2-atk.manifest . [ 45s] + exit 0 [ 45s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.wIkm0b [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd at-spi2-atk-2.16.0 [ 45s] ++ uname -m [ 45s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + LDFLAGS= [ 45s] + export LDFLAGS [ 45s] + LD_AS_NEEDED=1 [ 45s] + export LD_AS_NEEDED [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-p2p=no [ 47s] autoreconf: Entering directory `.' [ 47s] autoreconf: configure.ac: not using Gettext [ 48s] autoreconf: running: aclocal --force [ 53s] autoreconf: configure.ac: tracing [ 55s] autoreconf: running: libtoolize --copy --force [ 55s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. [ 55s] libtoolize: copying file `config/ltmain.sh' [ 55s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 55s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 55s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 60s] autoreconf: running: /usr/bin/autoconf --force [ 63s] autoreconf: running: /usr/bin/autoheader --force [ 65s] autoreconf: running: automake --add-missing --copy --force-missing [ 68s] configure.ac:28: installing 'config/compile' [ 68s] configure.ac:30: installing 'config/config.guess' [ 68s] configure.ac:30: installing 'config/config.sub' [ 68s] configure.ac:23: installing 'config/install-sh' [ 68s] configure.ac:23: installing 'config/missing' [ 68s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libatk-bridge-2.0.la': linking libtool libraries using a non-POSIX [ 68s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 68s] atk-adaptor/Makefile.am:3: while processing Libtool library 'libatk-bridge-2.0.la' [ 68s] atk-adaptor/Makefile.am: installing 'config/depcomp' [ 69s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libatk-bridge-adaptors.la': linking libtool libraries using a non-POSIX [ 69s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 69s] atk-adaptor/adaptors/Makefile.am:1: while processing Libtool library 'libatk-bridge-adaptors.la' [ 70s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libatk-bridge.la': linking libtool libraries using a non-POSIX [ 70s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 70s] atk-adaptor/gtk-2.0/Makefile.am:3: 'atk-adaptor/Makefile.include' included from here [ 70s] atk-adaptor/Makefile.include:1: while processing Libtool library 'libatk-bridge.la' [ 70s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libdroute.la': linking libtool libraries using a non-POSIX [ 70s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 70s] droute/Makefile.am:1: while processing Libtool library 'libdroute.la' [ 71s] parallel-tests: installing 'config/test-driver' [ 71s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libtestutils.la': linking libtool libraries using a non-POSIX [ 71s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 71s] tests/Makefile.am:5: while processing Libtool library 'libtestutils.la' [ 71s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libxmlloader.la': linking libtool libraries using a non-POSIX [ 71s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 71s] tests/Makefile.am:5: while processing Libtool library 'libxmlloader.la' [ 72s] /usr/share/automake-1.14/am/ltlibrary.am: warning: 'libdummyatk.la': linking libtool libraries using a non-POSIX [ 72s] /usr/share/automake-1.14/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' [ 72s] tests/dummyatk/Makefile.am:1: while processing Libtool library 'libdummyatk.la' [ 72s] autoreconf: Leaving directory `.' [ 73s] checking for a BSD-compatible install... /usr/bin/install -c [ 73s] checking whether build environment is sane... yes [ 73s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 73s] checking for gawk... gawk [ 73s] checking whether make sets $(MAKE)... yes [ 73s] checking whether make supports nested variables... yes [ 73s] checking whether make supports nested variables... (cached) yes [ 73s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 73s] checking whether the C compiler works... yes [ 73s] checking for C compiler default output file name... a.out [ 73s] checking for suffix of executables... [ 73s] checking whether we are cross compiling... no [ 73s] checking for suffix of object files... o [ 73s] checking whether we are using the GNU C compiler... yes [ 73s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 73s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 73s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 73s] checking for style of include used by make... GNU [ 73s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 73s] checking build system type... armv7l-tizen-linux-gnueabi [ 73s] checking host system type... armv7l-tizen-linux-gnueabi [ 73s] checking how to print strings... printf [ 73s] checking for a sed that does not truncate output... /usr/bin/sed [ 73s] checking for grep that handles long lines and -e... /usr/bin/grep [ 73s] checking for egrep... /usr/bin/grep -E [ 73s] checking for fgrep... /usr/bin/grep -F [ 73s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 73s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 73s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 73s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 73s] checking whether ln -s works... yes [ 73s] checking the maximum length of command line arguments... 1572864 [ 73s] checking whether the shell understands some XSI constructs... yes [ 73s] checking whether the shell understands "+="... yes [ 73s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 73s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 73s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 73s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 73s] checking for objdump... objdump [ 73s] checking how to recognize dependent libraries... pass_all [ 73s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 73s] checking for dlltool... no [ 73s] checking how to associate runtime and link libraries... printf %s\n [ 73s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 73s] checking for ar... ar [ 73s] checking for archiver @FILE support... @ [ 73s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 73s] checking for strip... strip [ 73s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 73s] checking for ranlib... ranlib [ 73s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 73s] checking for sysroot... no [ 73s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 73s] checking for mt... no [ 73s] checking if : is a manifest tool... no [ 73s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 73s] checking for ANSI C header files... yes [ 73s] checking for sys/types.h... yes [ 73s] checking for sys/stat.h... yes [ 73s] checking for stdlib.h... yes [ 74s] checking for string.h... yes [ 74s] checking for memory.h... yes [ 74s] checking for strings.h... yes [ 74s] checking for inttypes.h... yes [ 74s] checking for stdint.h... yes [ 74s] checking for unistd.h... yes [ 74s] checking for dlfcn.h... yes [ 74s] checking for objdir... .libs [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 74s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 74s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 74s] checking whether -lc should be explicitly linked in... no [ 74s] checking dynamic linker characteristics... GNU/Linux ld.so [ 74s] checking how to hardcode library paths into programs... immediate [ 74s] checking whether stripping libraries is possible... yes [ 74s] checking if libtool supports shared libraries... yes [ 74s] checking whether to build shared libraries... yes [ 74s] checking whether to build static libraries... no [ 74s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 74s] checking pkg-config is at least version 0.9.0... yes [ 74s] checking for DBUS... yes [ 74s] checking for GLIB... yes [ 74s] checking for GOBJ... yes [ 75s] checking for GMODULE... yes [ 75s] checking for ATK... yes [ 75s] checking for ATSPI... yes [ 75s] checking for armv7l-tizen-linux-gnueabi-pkg-config... (cached) /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 75s] checking pkg-config is at least version 0.16... yes [ 75s] checking that generated files are newer than configure... done [ 75s] configure: creating ./config.status [ 75s] config.status: creating Makefile [ 75s] config.status: creating atk-bridge-2.0.pc [ 75s] config.status: creating droute/Makefile [ 75s] config.status: creating atk-adaptor/Makefile [ 76s] config.status: creating atk-adaptor/adaptors/Makefile [ 76s] config.status: creating atk-adaptor/gtk-2.0/Makefile [ 76s] config.status: creating tests/Makefile [ 76s] config.status: creating tests/dummyatk/Makefile [ 76s] config.status: creating config.h [ 76s] config.status: executing depfiles commands [ 77s] config.status: executing libtool commands [ 77s] + /bin/make [ 77s] /bin/make all-recursive [ 77s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 77s] Making all in droute [ 77s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/droute' [ 77s] CC libdroute_la-droute.lo [ 77s] droute.c: In function 'impl_prop_GetSet': [ 77s] droute.c:330:22: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 77s] DBusMessage *ret; [ 77s] ^ [ 77s] CC libdroute_la-droute-variant.lo [ 77s] CC libdroute_la-droute-pairhash.lo [ 77s] CCLD libdroute.la [ 77s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/droute' [ 77s] Making all in atk-adaptor [ 77s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 77s] Making all in adaptors [ 77s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/adaptors' [ 77s] CC libatk_bridge_adaptors_la-accessible-adaptor.lo [ 78s] CC libatk_bridge_adaptors_la-action-adaptor.lo [ 78s] CC libatk_bridge_adaptors_la-application-adaptor.lo [ 78s] CC libatk_bridge_adaptors_la-cache-adaptor.lo [ 78s] CC libatk_bridge_adaptors_la-collection-adaptor.lo [ 78s] collection-adaptor.c:1239:1: warning: 'walkm' defined but not used [-Wunused-function] [ 78s] walkm (DBusMessage *message) [ 78s] ^ [ 79s] CC libatk_bridge_adaptors_la-component-adaptor.lo [ 79s] component-adaptor.c: In function 'impl_GetPosition': [ 79s] component-adaptor.c:130:3: warning: 'atk_component_get_position' is deprecated (declared at /usr/include/atk-1.0/atk/atkcomponent.h:190): Use 'atk_component_get_extents' instead [-Wdeprecated-declarations] [ 79s] atk_component_get_position (component, &ix, &iy, (AtkCoordType) coord_type); [ 79s] ^ [ 79s] component-adaptor.c: In function 'impl_GetSize': [ 79s] component-adaptor.c:153:3: warning: 'atk_component_get_size' is deprecated (declared at /usr/include/atk-1.0/atk/atkcomponent.h:195): Use 'atk_component_get_extents' instead [-Wdeprecated-declarations] [ 79s] atk_component_get_size (component, &iwidth, &iheight); [ 79s] ^ [ 79s] CC libatk_bridge_adaptors_la-document-adaptor.lo [ 79s] document-adaptor.c: In function 'impl_GetLocale': [ 79s] document-adaptor.c:58:3: warning: 'atk_document_get_locale' is deprecated (declared at /usr/include/atk-1.0/atk/atkdocument.h:95): Use 'atk_object_get_object_locale' instead [-Wdeprecated-declarations] [ 79s] lc = atk_document_get_locale (document); [ 79s] ^ [ 79s] CC libatk_bridge_adaptors_la-editabletext-adaptor.lo [ 79s] CC libatk_bridge_adaptors_la-hyperlink-adaptor.lo [ 79s] CC libatk_bridge_adaptors_la-hypertext-adaptor.lo [ 79s] CC libatk_bridge_adaptors_la-image-adaptor.lo [ 80s] CC libatk_bridge_adaptors_la-selection-adaptor.lo [ 80s] CC libatk_bridge_adaptors_la-socket-adaptor.lo [ 80s] CC libatk_bridge_adaptors_la-table-adaptor.lo [ 80s] table-adaptor.c: In function 'impl_GetIndexAt': [ 80s] table-adaptor.c:134:3: warning: 'atk_table_get_index_at' is deprecated (declared at /usr/include/atk-1.0/atk/atktable.h:139): Use 'atk_table_ref_at' instead [-Wdeprecated-declarations] [ 80s] index = atk_table_get_index_at (table, row, column); [ 80s] ^ [ 80s] table-adaptor.c: In function 'impl_GetRowAtIndex': [ 80s] table-adaptor.c:160:3: warning: 'atk_table_get_row_at_index' is deprecated (declared at /usr/include/atk-1.0/atk/atktable.h:146) [-Wdeprecated-declarations] [ 80s] row = atk_table_get_row_at_index (table, index); [ 80s] ^ [ 80s] table-adaptor.c: In function 'impl_GetColumnAtIndex': [ 80s] table-adaptor.c:186:3: warning: 'atk_table_get_column_at_index' is deprecated (declared at /usr/include/atk-1.0/atk/atktable.h:143) [-Wdeprecated-declarations] [ 80s] column = atk_table_get_column_at_index (table, index); [ 80s] ^ [ 80s] table-adaptor.c: In function 'impl_GetRowColumnExtentsAtIndex': [ 80s] table-adaptor.c:609:3: warning: 'atk_table_get_column_at_index' is deprecated (declared at /usr/include/atk-1.0/atk/atktable.h:143) [-Wdeprecated-declarations] [ 80s] column = atk_table_get_column_at_index (table, index); [ 80s] ^ [ 80s] table-adaptor.c:610:3: warning: 'atk_table_get_row_at_index' is deprecated (declared at /usr/include/atk-1.0/atk/atktable.h:146) [-Wdeprecated-declarations] [ 80s] row = atk_table_get_row_at_index (table, index); [ 80s] ^ [ 80s] CC libatk_bridge_adaptors_la-table-cell-adaptor.lo [ 80s] table-cell-adaptor.c: In function 'impl_get_Position': [ 80s] table-cell-adaptor.c:108:23: warning: variable 'd_column' set but not used [-Wunused-but-set-variable] [ 80s] dbus_int32_t d_row, d_column; [ 80s] ^ [ 80s] table-cell-adaptor.c:108:16: warning: variable 'd_row' set but not used [-Wunused-but-set-variable] [ 80s] dbus_int32_t d_row, d_column; [ 80s] ^ [ 80s] CC libatk_bridge_adaptors_la-text-adaptor.lo [ 80s] text-adaptor.c: In function 'impl_GetTextBeforeOffset': [ 80s] text-adaptor.c:140:5: warning: 'atk_text_get_text_before_offset' is deprecated (declared at /usr/include/atk-1.0/atk/atktext.h:369): Use 'atk_text_get_string_at_offset' instead [-Wdeprecated-declarations] [ 80s] atk_text_get_text_before_offset (text, offset, (AtkTextBoundary) type, [ 80s] ^ [ 80s] text-adaptor.c: In function 'impl_GetTextAtOffset': [ 80s] text-adaptor.c:177:5: warning: 'atk_text_get_text_at_offset' is deprecated (declared at /usr/include/atk-1.0/atk/atktext.h:363): Use 'atk_text_get_string_at_offset' instead [-Wdeprecated-declarations] [ 80s] atk_text_get_text_at_offset (text, offset, (AtkTextBoundary) type, [ 80s] ^ [ 80s] text-adaptor.c: In function 'impl_GetTextAfterOffset': [ 80s] text-adaptor.c:215:5: warning: 'atk_text_get_text_after_offset' is deprecated (declared at /usr/include/atk-1.0/atk/atktext.h:357): Use 'atk_text_get_string_at_offset' instead [-Wdeprecated-declarations] [ 80s] atk_text_get_text_after_offset (text, offset, (AtkTextBoundary) type, [ 80s] ^ [ 80s] text-adaptor.c: In function 'get_text_for_legacy_implementations': [ 80s] text-adaptor.c:296:9: warning: 'atk_text_get_text_at_offset' is deprecated (declared at /usr/include/atk-1.0/atk/atktext.h:363): Use 'atk_text_get_string_at_offset' instead [-Wdeprecated-declarations] [ 80s] atk_text_get_text_at_offset (text, offset, boundary, [ 80s] ^ [ 81s] CC libatk_bridge_adaptors_la-value-adaptor.lo [ 81s] value-adaptor.c: In function 'impl_get_MinimumValue': [ 81s] value-adaptor.c:45:3: warning: 'atk_value_get_minimum_value' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:133): Use 'atk_value_get_range' instead [-Wdeprecated-declarations] [ 81s] atk_value_get_minimum_value (value, &src); [ 81s] ^ [ 81s] value-adaptor.c: In function 'impl_get_MaximumValue': [ 81s] value-adaptor.c:70:3: warning: 'atk_value_get_maximum_value' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:130): Use 'atk_value_get_range' instead [-Wdeprecated-declarations] [ 81s] atk_value_get_maximum_value (value, &src); [ 81s] ^ [ 81s] value-adaptor.c: In function 'impl_get_MinimumIncrement': [ 81s] value-adaptor.c:91:3: warning: 'atk_value_get_minimum_increment' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:139): Use 'atk_value_get_increment' instead [-Wdeprecated-declarations] [ 81s] atk_value_get_minimum_increment (value, &src); [ 81s] ^ [ 81s] value-adaptor.c: In function 'impl_get_CurrentValue': [ 81s] value-adaptor.c:112:3: warning: 'atk_value_get_current_value' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:126): Use 'atk_value_get_value_and_text' instead [-Wdeprecated-declarations] [ 81s] atk_value_get_current_value (value, &src); [ 81s] ^ [ 81s] value-adaptor.c: In function 'impl_set_CurrentValue': [ 81s] value-adaptor.c:143:3: warning: 'atk_value_get_current_value' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:126): Use 'atk_value_get_value_and_text' instead [-Wdeprecated-declarations] [ 81s] atk_value_get_current_value (value, &dest); [ 81s] ^ [ 81s] value-adaptor.c:147:7: warning: 'atk_value_set_current_value' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:136): Use 'atk_value_set_value' instead [-Wdeprecated-declarations] [ 81s] atk_value_set_current_value (value, &dest); [ 81s] ^ [ 81s] value-adaptor.c: In function 'impl_SetCurrentValue': [ 81s] value-adaptor.c:179:3: warning: 'atk_value_set_current_value' is deprecated (declared at /usr/include/atk-1.0/atk/atkvalue.h:136): Use 'atk_value_set_value' instead [-Wdeprecated-declarations] [ 81s] rv = atk_value_set_current_value (value, &new_value); [ 81s] ^ [ 81s] CCLD libatk-bridge-adaptors.la [ 81s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/adaptors' [ 81s] Making all in . [ 81s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 81s] CC libatk_bridge_2_0_la-accessible-leasing.lo [ 81s] CC libatk_bridge_2_0_la-accessible-cache.lo [ 81s] CC libatk_bridge_2_0_la-accessible-register.lo [ 81s] CC libatk_bridge_2_0_la-accessible-stateset.lo [ 82s] CC libatk_bridge_2_0_la-introspection.lo [ 82s] CC libatk_bridge_2_0_la-bridge.lo [ 82s] bridge.c:673:1: warning: 'new_connection_cb' defined but not used [-Wunused-function] [ 82s] new_connection_cb (DBusServer *server, DBusConnection *con, void *data) [ 82s] ^ [ 82s] CC libatk_bridge_2_0_la-object.lo [ 82s] CC libatk_bridge_2_0_la-event.lo [ 82s] event.c: In function 'emit_event': [ 82s] event.c:489:67: warning: unused variable 'iter_array' [-Wunused-variable] [ 82s] DBusMessageIter iter, iter_dict, iter_dict_entry, iter_variant, iter_array; [ 82s] ^ [ 82s] event.c:489:53: warning: unused variable 'iter_variant' [-Wunused-variable] [ 82s] DBusMessageIter iter, iter_dict, iter_dict_entry, iter_variant, iter_array; [ 82s] ^ [ 82s] event.c: In function 'spi_atk_register_event_listeners': [ 82s] event.c:1195:3: warning: 'atk_add_focus_tracker' is deprecated (declared at /usr/include/atk-1.0/atk/atkutil.h:191) [-Wdeprecated-declarations] [ 82s] atk_bridge_focus_tracker_id = atk_add_focus_tracker (focus_tracker); [ 82s] ^ [ 82s] event.c: In function 'spi_atk_deregister_event_listeners': [ 82s] event.c:1307:5: warning: 'atk_remove_focus_tracker' is deprecated (declared at /usr/include/atk-1.0/atk/atkutil.h:193) [-Wdeprecated-declarations] [ 82s] atk_remove_focus_tracker (atk_bridge_focus_tracker_id); [ 82s] ^ [ 82s] event.c: At top level: [ 82s] event.c:455:1: warning: 'open_variant' defined but not used [-Wunused-function] [ 82s] open_variant (DBusMessageIter *iter, const char *name, const char *type, [ 82s] ^ [ 83s] CC libatk_bridge_2_0_la-spi-dbus.lo [ 83s] CCLD libatk-bridge-2.0.la [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] Making all in gtk-2.0 [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0' [ 83s] CC libatk_bridge_la-module.lo [ 83s] CCLD libatk-bridge.la [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 83s] + exit 0 [ 83s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vdiCia [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd at-spi2-atk-2.16.0 [ 83s] + LANG=C [ 83s] + export LANG [ 83s] + unset DISPLAY [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 83s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 83s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm install [ 83s] Making install in droute [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/droute' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/droute' [ 83s] make[2]: Nothing to be done for 'install-exec-am'. [ 83s] make[2]: Nothing to be done for 'install-data-am'. [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/droute' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/droute' [ 83s] Making install in atk-adaptor [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] Making install in adaptors [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/adaptors' [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/adaptors' [ 83s] make[3]: Nothing to be done for 'install-exec-am'. [ 83s] make[3]: Nothing to be done for 'install-data-am'. [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/adaptors' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/adaptors' [ 83s] Making install in . [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib' [ 83s] /bin/sh ../libtool --mode=install /usr/bin/install -c libatk-bridge-2.0.la '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib' [ 83s] libtool: install: /usr/bin/install -c .libs/libatk-bridge-2.0.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/libatk-bridge-2.0.so.0.0.0 [ 83s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib && { ln -s -f libatk-bridge-2.0.so.0.0.0 libatk-bridge-2.0.so.0 || { rm -f libatk-bridge-2.0.so.0 && ln -s libatk-bridge-2.0.so.0.0.0 libatk-bridge-2.0.so.0; }; }) [ 83s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib && { ln -s -f libatk-bridge-2.0.so.0.0.0 libatk-bridge-2.0.so || { rm -f libatk-bridge-2.0.so && ln -s libatk-bridge-2.0.so.0.0.0 libatk-bridge-2.0.so; }; }) [ 83s] libtool: install: /usr/bin/install -c .libs/libatk-bridge-2.0.lai /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/libatk-bridge-2.0.la [ 83s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 83s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/include/at-spi2-atk/2.0/' [ 83s] /usr/bin/install -c -m 644 atk-bridge.h '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/include/at-spi2-atk/2.0/' [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] Making install in gtk-2.0 [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0' [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0' [ 83s] make[3]: Nothing to be done for 'install-exec-am'. [ 83s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gtk-2.0/modules' [ 83s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libatk-bridge.la '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gtk-2.0/modules' [ 83s] libtool: install: warning: relinking `libatk-bridge.la' [ 83s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0; /bin/sh /home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/atk-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I../.. -I../../atk-adaptor/adaptors -I../../atk-adaptor/ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Werror-implicit-function-declaration -no-undefined -module -avoid-version -rpath /usr/lib/gtk-2.0/modules -o libatk-bridge.la -rpath /usr/lib/gtk-2.0/modules libatk_bridge_la-module.lo -ldbus-1 -Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0 -latk-1.0 -lgobject-2.0 -lglib-2.0 -latspi -ldbus-1 -lglib-2.0 ../../atk-adaptor/libatk-bridge-2.0.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm) [ 83s] libtool: install: /usr/bin/install -c .libs/libatk-bridge.soT /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gtk-2.0/modules/libatk-bridge.so [ 83s] libtool: install: /usr/bin/install -c .libs/libatk-bridge.lai /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gtk-2.0/modules/libatk-bridge.la [ 83s] libtool: install: warning: remember to run `libtool --finish /usr/lib/gtk-2.0/modules' [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor/gtk-2.0' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0/atk-adaptor' [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 83s] make[2]: Nothing to be done for 'install-exec-am'. [ 83s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gnome-settings-daemon-3.0/gtk-modules/' [ 83s] /usr/bin/install -c -m 644 at-spi2-atk.desktop '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gnome-settings-daemon-3.0/gtk-modules/' [ 84s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/pkgconfig' [ 84s] /usr/bin/install -c -m 644 atk-bridge-2.0.pc '/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/pkgconfig' [ 84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0' [ 84s] + rm -f /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/share/info/dir [ 84s] + find /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm -regex '.*\.la$' [ 84s] + xargs rm -f -- [ 84s] + find /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm -regex '.*\.a$' [ 84s] + xargs rm -f -- [ 84s] + find /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm -name '*.la' -or -name '*.a' [ 84s] + xargs rm -f [ 84s] + find /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm -name '*.desktop' [ 84s] + xargs rm -f [ 84s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/at-spi2-atk-2.16.0 [ 84s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/gtk-2.0/modules/libatk-bridge.so [ 84s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/lib/libatk-bridge-2.0.so.0.0.0 [ 84s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 84s] 887 blocks [ 84s] + /usr/lib/rpm/check-buildroot [ 84s] + /usr/lib/rpm//brp-compress [ 84s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 84s] + /usr/lib/rpm/brp-python-hardlink [ 84s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 84s] Processing files: at-spi2-atk-debugsource-2.16.0-3.1.armv7l [ 84s] Provides: at-spi2-atk-debugsource = 2.16.0-3.1 at-spi2-atk-debugsource(armv7l-32) = 2.16.0-3.1 [ 84s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 84s] Processing files: libatk-bridge-2_0-0-2.16.0-3.1.armv7l [ 84s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 84s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 84s] [ 84s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.nTPOrb [ 84s] + umask 022 [ 84s] + cd /home/abuild/rpmbuild/BUILD [ 84s] + cd at-spi2-atk-2.16.0 [ 84s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/share/licenses/libatk-bridge-2_0-0 [ 84s] + export LICENSEDIR [ 84s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/share/licenses/libatk-bridge-2_0-0 [ 84s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm/usr/share/licenses/libatk-bridge-2_0-0 [ 84s] + exit 0 [ 84s] Provides: libatk-bridge-2.0.so.0 libatk-bridge-2_0-0 = 2.16.0-3.1 libatk-bridge-2_0-0(armv7l-32) = 2.16.0-3.1 libatk-bridge.so [ 84s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 84s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 84s] Requires(post): /sbin/ldconfig [ 84s] Requires(postun): /sbin/ldconfig [ 84s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libatk-1.0.so.0 libatk-bridge-2.0.so.0 libatspi.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-1.so.3(LIBDBUS_1_3) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgmodule-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 rtld(GNU_HASH) [ 84s] Processing files: at-spi2-atk-devel-2.16.0-3.1.armv7l [ 84s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 84s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 84s] [ 84s] Provides: at-spi2-atk-devel = 2.16.0-3.1 at-spi2-atk-devel(armv7l-32) = 2.16.0-3.1 pkgconfig(atk-bridge-2.0) = 2.16.0 [ 84s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 84s] Requires: /usr/bin/pkg-config libatk-bridge-2.0.so.0 pkgconfig(atspi-2) pkgconfig(gobject-2.0) [ 84s] Processing files: libatk-bridge-2_0-0-debuginfo-2.16.0-3.1.armv7l [ 84s] warning: File listed twice: /usr/lib/debug/.build-id [ 84s] Provides: libatk-bridge-2_0-0-debuginfo = 2.16.0-3.1 libatk-bridge-2_0-0-debuginfo(armv7l-32) = 2.16.0-3.1 [ 84s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 84s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 84s] warning: Could not canonicalize hostname: obspw10 [ 85s] Wrote: /home/abuild/rpmbuild/SRPMS/at-spi2-atk-2.16.0-3.1.src.rpm [ 85s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/at-spi2-atk-debugsource-2.16.0-3.1.armv7l.rpm [ 85s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libatk-bridge-2_0-0-2.16.0-3.1.armv7l.rpm [ 85s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/at-spi2-atk-devel-2.16.0-3.1.armv7l.rpm [ 85s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libatk-bridge-2_0-0-debuginfo-2.16.0-3.1.armv7l.rpm [ 85s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5SpgMo [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd at-spi2-atk-2.16.0 [ 85s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 85s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/at-spi2-atk-2.16.0-3.1.arm [ 85s] + exit 0 [ 85s] ... checking for files with abuild user/group [ 85s] ... creating baselibs [ 85s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 86s] ... comparing built packages with the former built [ 86s] /usr/lib/build/pkg-diff.sh [ 86s] compare /.build.oldpackages/at-spi2-atk-2.16.0-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/at-spi2-atk-2.16.0-3.1.src.rpm [ 86s] This is not a prerelease project. Compare the project name. [ 86s] comparing rpmtags [ 86s] comparing RELEASE [ 86s] comparing PROVIDES [ 86s] comparing scripts [ 86s] comparing filelist [ 86s] comparing file checksum [ 86s] RPM meta information is identical [ 86s] compare /.build.oldpackages/at-spi2-atk-debugsource-2.16.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/at-spi2-atk-debugsource-2.16.0-3.1.armv7l.rpm [ 86s] Comparing at-spi2-atk-debugsource-2.16.0-2.1.armv7l.rpm to at-spi2-atk-debugsource-2.16.0-3.1.armv7l.rpm [ 86s] This is not a prerelease project. Compare the project name. [ 86s] comparing rpmtags [ 86s] --- /tmp/tmp.oyQhY20297/tmp.uxxAo20315 2017-07-11 22:48:18.588915440 +0000 [ 86s] +++ /tmp/tmp.oyQhY20297/tmp.DBqaa20317 2017-07-11 22:48:18.600915615 +0000 [ 86s] @@ -10,4 +10,4 @@ [ 86s] cpio xz 5T [ 86s] [ 86s] 1364212800 tomasz.duszynski@comarch.com - Initial packaging of at-spi2-atk (2.5.92) [ 86s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/657e08507ec4ad3a7c18085866eb599c-at-spi2-atk Tizen:3.0:Wearable / target-circle [ 86s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/10312ad1f3b9ec189e079619fd6b9235-at-spi2-atk Tizen:3.0:Wearable / target-circle [ 86s] RPM meta information is different [ 86s] compare /.build.oldpackages/at-spi2-atk-devel-2.16.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/at-spi2-atk-devel-2.16.0-3.1.armv7l.rpm [ 86s] Comparing at-spi2-atk-devel-2.16.0-2.1.armv7l.rpm to at-spi2-atk-devel-2.16.0-3.1.armv7l.rpm [ 86s] This is not a prerelease project. Compare the project name. [ 86s] comparing rpmtags [ 86s] --- /tmp/tmp.TwvRp20335/tmp.JzJpC20353 2017-07-11 22:48:18.808918665 +0000 [ 86s] +++ /tmp/tmp.TwvRp20335/tmp.VcOGl20355 2017-07-11 22:48:18.816918782 +0000 [ 86s] @@ -9,4 +9,4 @@ [ 86s] cpio xz 5T [ 86s] [ 86s] 1364212800 tomasz.duszynski@comarch.com - Initial packaging of at-spi2-atk (2.5.92) [ 86s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/657e08507ec4ad3a7c18085866eb599c-at-spi2-atk Tizen:3.0:Wearable / target-circle [ 86s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/10312ad1f3b9ec189e079619fd6b9235-at-spi2-atk Tizen:3.0:Wearable / target-circle [ 86s] RPM meta information is different [ 86s] compare /.build.oldpackages/libatk-bridge-2_0-0-2.16.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libatk-bridge-2_0-0-2.16.0-3.1.armv7l.rpm [ 86s] Comparing libatk-bridge-2_0-0-2.16.0-2.1.armv7l.rpm to libatk-bridge-2_0-0-2.16.0-3.1.armv7l.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] --- /tmp/tmp.KwtQH20373/tmp.eioig20391 2017-07-11 22:48:19.024921832 +0000 [ 87s] +++ /tmp/tmp.KwtQH20373/tmp.wPuCn20393 2017-07-11 22:48:19.032921949 +0000 [ 87s] @@ -11,4 +11,4 @@ [ 87s] cpio xz 5T [ 87s] [ 87s] 1364212800 tomasz.duszynski@comarch.com - Initial packaging of at-spi2-atk (2.5.92) [ 87s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/657e08507ec4ad3a7c18085866eb599c-at-spi2-atk Tizen:3.0:Wearable / target-circle [ 87s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/10312ad1f3b9ec189e079619fd6b9235-at-spi2-atk Tizen:3.0:Wearable / target-circle [ 87s] RPM meta information is different [ 87s] compare /.build.oldpackages/libatk-bridge-2_0-0-debuginfo-2.16.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libatk-bridge-2_0-0-debuginfo-2.16.0-3.1.armv7l.rpm [ 87s] skipping -debuginfo package [ 87s] [ 87s] obspw10 finished "build at-spi2-atk.spec" at Tue Jul 11 22:48:19 UTC 2017. [ 87s] Retried build at Thu Jul 13 22:33:40 2017 returned same result, skipped Retried build at Fri Jul 14 06:31:29 2017 returned same result, skipped Retried build at Fri Jul 14 08:03:48 2017 returned same result, skipped Retried build at Mon Jul 17 09:15:24 2017 returned same result, skipped Retried build at Wed Jul 19 00:55:46 2017 returned same result, skipped Retried build at Fri Jul 21 03:03:19 2017 returned same result, skipped Retried build at Mon Jul 24 03:42:50 2017 returned same result, skipped Retried build at Mon Jul 24 08:17:27 2017 returned same result, skipped Retried build at Fri Jul 28 01:15:10 2017 returned same result, skipped Retried build at Mon Jul 31 01:49:11 2017 returned same result, skipped Retried build at Thu Aug 3 01:30:43 2017 returned same result, skipped Retried build at Thu Aug 3 08:17:25 2017 returned same result, skipped Retried build at Fri Aug 4 02:06:26 2017 returned same result, skipped Retried build at Tue Aug 8 07:34:19 2017 returned same result, skipped Retried build at Wed Aug 9 22:49:20 2017 returned same result, skipped Retried build at Thu Aug 10 10:10:35 2017 returned same result, skipped Retried build at Fri Aug 11 09:59:27 2017 returned same result, skipped Retried build at Wed Aug 16 02:24:33 2017 returned same result, skipped Retried build at Wed Aug 16 13:35:26 2017 returned same result, skipped Retried build at Thu Aug 17 01:07:48 2017 returned same result, skipped Retried build at Fri Aug 18 00:37:36 2017 returned same result, skipped Retried build at Sun Aug 20 23:42:14 2017 returned same result, skipped Retried build at Wed Aug 23 22:39:30 2017 returned same result, skipped Retried build at Thu Aug 24 22:37:35 2017 returned same result, skipped Retried build at Sat Aug 26 02:27:35 2017 returned same result, skipped Retried build at Sat Sep 9 04:51:58 2017 returned same result, skipped Retried build at Fri Oct 13 12:24:59 2017 returned same result, skipped Retried build at Thu Oct 19 11:10:11 2017 returned same result, skipped Retried build at Thu Oct 26 01:22:05 2017 returned same result, skipped Retried build at Wed Nov 8 03:25:56 2017 returned same result, skipped