[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw16 started "build _service:gbs:capi-system-sensor.spec" at Thu Jul 20 01:08:28 UTC 2017. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 'cd5608f76fb175f5accf1fc3372be9cd' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling tar... [ 7s] [35/40] preinstalling libmount... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: gio-branding-upstream -> libgio [ 7s] breaking dependency libgio -> gio-branding-upstream [ 7s] cycle: girepository -> libgirepository [ 7s] breaking dependency libgirepository -> girepository [ 7s] cycle: eina -> efl [ 7s] breaking dependency efl -> eina [ 7s] cycle: efl -> eo [ 7s] breaking dependency eo -> efl [ 7s] cycle: eina -> efl -> eo [ 7s] breaking dependency eo -> eina [ 7s] cycle: ecore -> eeze [ 7s] breaking dependency ecore -> eeze [ 7s] cycle: ecore -> eldbus [ 7s] breaking dependency ecore -> eldbus [ 7s] cycle: ecore -> evas [ 7s] breaking dependency evas -> ecore [ 7s] cycle: libalarm -> alarm-server [ 7s] breaking dependency alarm-server -> libalarm [ 7s] cycle: libsensord -> sensord [ 7s] breaking dependency libsensord -> sensord [ 7s] cycle: ecore-devel -> eeze-devel [ 7s] breaking dependency ecore-devel -> eeze-devel [ 7s] cycle: ecore-devel -> eldbus-devel [ 7s] breaking dependency ecore-devel -> eldbus-devel [ 7s] cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] [1/277] installing default-ac-domains-0.1-1.1 [ 8s] [2/277] installing libmagic-data-5.28-2.11 [ 8s] [3/277] installing setup-0.9-2.3 [ 8s] [4/277] installing terminfo-base-5.9-1.30 [ 8s] [5/277] installing filesystem-3.1-1.2 [ 8s] [6/277] installing glibc-2.20-2.3 [ 8s] [7/277] installing libatomic-4.9.2-1.12 [ 8s] [8/277] installing libgcc-4.9.2-1.12 [ 8s] [9/277] installing libgomp-4.9.2-1.12 [ 8s] [10/277] installing bash-3.2.57-2.1 [ 8s] [11/277] installing capi-base-common-0.4.12-1.1 [ 8s] [12/277] installing cpio-2.11-1.3 [ 8s] [13/277] installing diffutils-3.3-1.3 [ 8s] [14/277] installing findutils-4.3.8-1.31 [ 8s] [15/277] installing fribidi-0.19.7-1.1 [ 8s] [16/277] installing gdbm-1.8.3-1.3 [ 8s] [17/277] installing giflib-5.1.2-1.1 [ 8s] [18/277] installing hostname-3.12-1.3 [ 8s] [19/277] installing iniparser-3.2-1.1 [ 9s] [20/277] installing libattr-2.4.47-1.30 [ 9s] [21/277] installing libbz2-1.0.6-1.52 [ 9s] [22/277] installing libcap-2.24-1.30 [ 9s] [23/277] installing libdrm-2.4.58-1.1 [ 9s] [24/277] installing libelf-0.153-1.32 [ 9s] [25/277] installing libelf0-0.8.13-1.3 [ 9s] [26/277] installing libevdev-1.2.2-1.1 [ 9s] [27/277] installing libexpat-2.2.0-1.29 [ 9s] [28/277] installing libext2fs-1.42.13-1.3 [ 9s] [29/277] installing libffi-3.1-1.3 [ 9s] [30/277] installing libfreebl3-3.23-1.46 [ 9s] [31/277] installing libhyphen-2.8.8-1.1 [ 9s] [32/277] installing libitm-4.9.2-1.12 [ 9s] [33/277] installing libjpeg-8.0.2-1.5 [ 9s] [34/277] installing libjson-0.12-1.1 [ 9s] [35/277] installing libltdl-2.4.2-1.34 [ 9s] [36/277] installing liblua-5.1.4-1.10 [ 9s] [37/277] installing liblzma-5.2.2-1.26 [ 9s] [38/277] installing libmtdev-1.1.5-1.1 [ 10s] [39/277] installing libogg-1.3.2-1.1 [ 10s] [40/277] installing libpcre-8.39-1.3 [ 10s] [41/277] installing libpopt-1.16-1.10 [ 10s] [42/277] installing libpython-2.7.8-1.15 [ 10s] [43/277] installing libsmack-1.3.0-2.9 [ 10s] [44/277] installing libsmartcols-2.28-2.1 [ 10s] [45/277] installing libsqlite-3.8.10.2-1.10 [ 10s] [46/277] installing libstdc++-4.9.2-1.12 [ 10s] [47/277] installing libuuid-2.28-2.1 [ 10s] [48/277] installing libwayland-egl-1.0-2.1 [ 10s] [49/277] installing libxkbcommon-0.4.3-1.1 [ 10s] [50/277] installing m4-1.4.17-1.3 [ 10s] [51/277] installing net-tools-2.0_20121208git-1.3 [ 10s] [52/277] installing nspr-4.12-1.15 [ 10s] [53/277] installing patch-2.7-1.10 [ 10s] [54/277] installing pixman-0.32.6-1.1 [ 10s] [55/277] installing pkg-config-0.28-1.33 [ 10s] [56/277] installing sed-4.1c-1.3 [ 10s] [57/277] installing update-alternatives-1.16.3-1.3 [ 10s] [58/277] installing which-2.20-1.3 [ 10s] [59/277] installing xdgmime-0.0.12-1.1 [ 11s] [60/277] installing zlib-1.2.8-1.34 [ 11s] [61/277] installing libncurses-5.9-1.30 [ 11s] [62/277] installing shadow-utils-4.1.4.2-1.2 [ 11s] [63/277] installing build-compare-2015.04.28-1.25 [ 11s] [64/277] installing libstdc++-devel-4.9.2-1.12 [ 11s] [65/277] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 12s] [66/277] installing capi-base-common-devel-0.4.12-1.1 [ 12s] [67/277] installing cpp-4.9.2-1.12 [ 13s] [68/277] installing fribidi-devel-0.19.7-1.1 [ 13s] [69/277] installing gcc-c++-4.9.2-1.12 [ 13s] [70/277] installing libuuid-devel-2.28-2.1 [ 13s] [71/277] installing libxkbcommon-devel-0.4.3-1.1 [ 13s] [72/277] installing pkgmgr-0.2.91-3.1 [ 13s] /var/tmp/rpm-tmp.EPA735: line 9: /etc/tizen-platform.conf: No such file or directory [ 13s] warning: %post(pkgmgr-0.2.91-3.1.armv7l) scriptlet failed, exit status 1 [ 13s] [73/277] installing xdgmime-devel-0.0.12-1.1 [ 13s] [74/277] installing binutils-2.25-1.11 [ 14s] [75/277] installing coreutils-6.9-1.3 [ 14s] [76/277] installing db4-4.8.30.NC-1.37 [ 14s] [77/277] installing gawk-3.1.5-1.3 [ 14s] [78/277] installing grep-2.5.2-1.3 [ 14s] [79/277] installing less-466-1.3 [ 14s] [80/277] installing libacl-2.2.52-1.31 [ 14s] [81/277] installing libasm-0.153-1.32 [ 14s] [82/277] installing libblkid-2.28-2.1 [ 14s] [83/277] installing libcap-tools-2.24-1.30 [ 14s] [84/277] installing libglib-2.44.1-1.1 [ 14s] [85/277] installing libkms-2.4.58-1.1 [ 14s] [86/277] installing libopenssl-1.0.2k-2.1 [ 14s] [87/277] installing libpcreposix-8.39-1.3 [ 15s] [88/277] installing libpng-1.6.21-1.1 [ 15s] [89/277] installing libreadline-5.2-1.29 [ 15s] [90/277] installing libubsan-4.9.2-1.12 [ 15s] [91/277] installing libvorbis-1.3.4-1.1 [ 15s] [92/277] installing make-4.0-1.10 [ 15s] [93/277] installing minizip-1.2.8-1.34 [ 15s] [94/277] installing nss-certs-3.23-1.46 [ 15s] [95/277] installing smack-1.3.0-2.9 [ 15s] [96/277] installing bzip2-1.0.6-1.52 [ 15s] [97/277] installing libicu-57.1-1.1 [ 16s] [98/277] installing libkmod-18-1.1 [ 16s] [99/277] installing libmagic-5.28-2.11 [ 16s] [100/277] installing libpcrecpp-8.39-1.3 [ 16s] [101/277] installing libxml2-2.9.4-2.26 [ 16s] [102/277] installing ttrace-1.0.3-2.1 [ 16s] [103/277] installing xz-5.2.2-1.26 [ 16s] [104/277] installing cynara-db-migration-0.14.10-1.1 [ 16s] [105/277] installing libdw-0.153-1.32 [ 16s] [106/277] installing libtiff-4.0.7-2.1 [ 16s] [107/277] installing libicu-devel-57.1-1.1 [ 16s] [108/277] installing linux-glibc-devel-3.10-1.35 [ 17s] [109/277] installing vconf-internal-keys-devel-0.0.159-3.1 [ 17s] [110/277] installing file-5.28-2.11 [ 17s] [111/277] installing glibc-locale-2.20-2.3 [ 17s] [112/277] installing libblkid-devel-2.28-2.1 [ 17s] [113/277] installing libgmodule-2.44.1-1.1 [ 17s] [114/277] installing libgthread-2.44.1-1.1 [ 17s] [115/277] installing openssl-1.0.2k-2.1 [ 17s] [116/277] installing security-config-1.0-4.1 [ 24s] usermod: user 'buxton' does not exist [ 24s] usermod: user 'dbus' does not exist [ 24s] [117/277] installing tar-1.17-1.3 [ 24s] [118/277] installing tizen-platform-config-2.2-1.1 [ 24s] [119/277] installing gzip-1.3.12-1.30 [ 24s] [120/277] installing libfdisk1-2.28-2.1 [ 24s] [121/277] installing libfreetype-2.6.5-1.1 [ 25s] [122/277] installing libgobject-2.44.1-1.1 [ 25s] [123/277] installing libmount-2.28-2.1 [ 25s] [124/277] installing libsndfile-1.0.26-3.1 [ 25s] [125/277] installing lua-5.1.4-1.10 [ 25s] [126/277] installing pam-1.1.6-1.2 [ 25s] [127/277] installing sqlite-3.8.10.2-1.10 [ 25s] [128/277] installing perl-5.20.0-1.35 [ 26s] [129/277] installing tzdata-2016i-1.1 [ 26s] [130/277] installing pcre-devel-8.39-1.3 [ 26s] [131/277] installing elfutils-0.153-1.32 [ 26s] [132/277] installing gcc-4.9.2-1.12 [ 27s] [133/277] installing libcynara-commons-0.14.10-1.1 [ 27s] [134/277] installing shared-mime-info-1.3-1.1 [ 34s] [135/277] installing libarchive-3.1.2-1.3 [ 34s] [136/277] installing python-2.7.8-1.15 [ 35s] [137/277] installing build-mkbaselibs-20120927-1.3 [ 35s] [138/277] installing glibc-devel-2.20-2.3 [ 35s] [139/277] installing qemu-accel-x86_64-armv7l-0.4-1.8 [ 39s] [140/277] installing autoconf-2.69-1.37 [ 39s] [141/277] installing libmount-devel-2.28-2.1 [ 39s] [142/277] installing libtzplatform-config-2.2-1.1 [ 39s] [143/277] installing lua-devel-5.1.4-1.10 [ 39s] [144/277] installing libcynara-client-0.14.10-1.1 [ 39s] [145/277] installing libcynara-creds-commons-0.14.10-1.1 [ 40s] [146/277] installing libcynara-session-0.14.10-1.1 [ 40s] [147/277] installing libdrm-devel-2.4.58-1.1 [ 40s] [148/277] installing python-xml-2.7.8-1.15 [ 40s] [149/277] installing libsystemd-219-7.1 [ 40s] [150/277] installing libharfbuzz-1.3.0-1.1 [ 40s] [151/277] installing cmake-2.8.12.2-1.4 [ 40s] [152/277] installing fontconfig-2.12.1-1.1 [ 40s] [153/277] installing util-linux-2.28-2.1 [ 41s] [154/277] installing systemd-219-7.1 [ 41s] [155/277] installing libtzplatform-config-devel-2.2-1.1 [ 41s] [156/277] installing systemd-devel-219-7.1 [ 41s] [157/277] installing zlib-devel-1.2.8-1.34 [ 41s] [158/277] installing automake-1.14.1-1.32 [ 41s] [159/277] installing dbus-libs-1.10.6-2.1 [ 42s] [160/277] installing libsndfile-devel-1.0.26-3.1 [ 42s] [161/277] installing sqlite-devel-3.8.10.2-1.10 [ 42s] [162/277] installing util-linux-su-2.28-2.1 [ 42s] [163/277] installing build-20120927-1.3 [ 42s] [164/277] installing libcynara-creds-socket-0.14.10-1.1 [ 42s] [165/277] installing libdlog-0.5.1-1.1 [ 42s] [166/277] installing libinput-0.11.0-3.1 [ 42s] [167/277] installing dbus-devel-1.10.6-2.1 [ 42s] [168/277] installing libdlog-devel-0.5.1-1.1 [ 42s] [169/277] installing libinput-devel-0.11.0-3.1 [ 42s] [170/277] installing libtracker-1.0.1-2.1 [ 42s] [171/277] installing coregl-0.1.10-1.11 [ 42s] [172/277] installing libopenssl-devel-1.0.2k-2.1 [ 42s] [173/277] installing libtool-2.4.2-1.34 [ 42s] [174/277] installing libwayland-client-1.10.0-3.1 [ 42s] [175/277] installing libwayland-server-1.10.0-3.1 [ 42s] [176/277] installing libslp-db-util-0.1.1-1.1 [ 42s] [177/277] installing libpng-devel-1.6.21-1.1 [ 43s] [178/277] installing libpulse-5.0-2.1 [ 43s] [179/277] installing capi-system-info-0.2.0-1.1 [ 43s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 43s] iniparser: cannot open /etc/info.ini [ 43s] [180/277] installing libwayland-extension-client-1.1.20-8.1 [ 43s] [181/277] installing libwayland-cursor-1.10.0-3.1 [ 43s] [182/277] installing libpulse-mainloop-glib-5.0-2.1 [ 43s] [183/277] installing freetype2-devel-2.6.5-1.1 [ 43s] [184/277] installing libtbm-2.0.24-10.1 [ 43s] [185/277] installing fontconfig-devel-2.12.1-1.1 [ 43s] [186/277] installing libtbm-devel-2.0.24-10.1 [ 43s] [187/277] installing libwayland-tbm-client-0.1.21-3.1 [ 43s] [188/277] installing libwayland-tbm-server-0.1.21-3.1 [ 43s] [189/277] installing wayland-devel-1.10.0-3.1 [ 43s] [190/277] installing libtdm-1.7.0-8.1 [ 43s] [191/277] installing libtdm-devel-1.7.0-8.1 [ 44s] [192/277] installing wayland-extension-client-devel-1.1.20-8.1 [ 44s] [193/277] installing libgbm-1.0-1.1 [ 44s] [194/277] installing libwayland-tbm-devel-0.1.21-3.1 [ 44s] [195/277] installing libtdm-client-1.7.0-8.1 [ 44s] [196/277] installing libgbm-devel-1.0-1.1 [ 44s] [197/277] installing libtdm-client-devel-1.7.0-8.1 [ 44s] [198/277] installing eo-1.16.0-8.1 [ 44s] [199/277] installing nss-3.23-1.46 [ 44s] [200/277] installing libgio-2.44.1-1.1 [ 44s] [201/277] installing gio-branding-upstream-2.44.1-1.1 [ 44s] [202/277] installing efl-1.16.0-8.1 [ 44s] [203/277] installing libjson-glib-1.2.0-1.1 [ 44s] [204/277] installing libsoftokn3-3.23-1.46 [ 44s] [205/277] installing glib2-tools-2.44.1-1.1 [ 44s] [206/277] installing libgirepository-1.36.0-1.1 [ 44s] [207/277] installing rpm-4.11.0.1-2.8 [ 44s] [208/277] installing buxton2-1.2.0-5.1 [ 46s] warning: user buxton does not exist - using root [ 46s] warning: group buxton does not exist - using root [ 46s] warning: user buxton does not exist - using root [ 46s] warning: group buxton does not exist - using root [ 46s] Running buxton2 %posttrans script [ 46s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 46s] /etc/buxton2/*: No such file or directory [ 46s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 46s] /var/lib/buxton2/*: No such file or directory [ 46s] [209/277] installing girepository-1.36.0-1.1 [ 46s] [210/277] installing eina-1.16.0-8.1 [ 46s] [211/277] installing bundle-0.1.31-1.1 [ 46s] [212/277] installing vconf-compat-1.2.0-5.1 [ 46s] [213/277] installing glib2-devel-2.44.1-1.1 [ 46s] [214/277] installing rpm-build-4.11.0.1-2.8 [ 46s] [215/277] installing typelib-Json-1.2.0-1.1 [ 46s] [216/277] installing bundle-devel-0.1.31-1.1 [ 46s] [217/277] installing eina-devel-1.16.0-8.1 [ 46s] [218/277] installing embryo-1.16.0-8.1 [ 46s] [219/277] installing harfbuzz-devel-1.3.0-1.1 [ 46s] [220/277] installing libpulse-devel-5.0-2.1 [ 46s] [221/277] installing vconf-compat-devel-1.2.0-5.1 [ 46s] [222/277] installing ector-1.16.0-8.1 [ 46s] [223/277] installing eventsystem-0.0.1-1.1 [ 46s] [224/277] installing emile-1.16.0-8.1 [ 46s] [225/277] installing libstorage-0.1.1-3.1 [ 47s] [226/277] installing capi-system-device-0.1.0-1.1 [ 47s] [227/277] installing libsensord-2.0.9-2.1 [ 47s] [228/277] installing pkgmgr-info-0.1.2-6.1 [ 47s] [229/277] installing embryo-devel-1.16.0-8.1 [ 47s] [230/277] installing eo-devel-1.16.0-8.1 [ 47s] [231/277] installing json-glib-devel-1.2.0-1.1 [ 47s] [232/277] installing emile-devel-1.16.0-8.1 [ 47s] [233/277] installing libsensord-devel-2.0.9-2.1 [ 47s] [234/277] installing eet-1.16.0-8.1 [ 47s] [235/277] installing pkgmgr-installer-0.2.91-3.1 [ 47s] [236/277] installing pkgmgr-client-0.2.91-3.1 [ 47s] [237/277] installing sensord-2.0.9-2.1 [ 47s] Running in chroot, ignoring request. [ 47s] [238/277] installing efl-devel-1.16.0-8.1 [ 47s] [239/277] installing eet-devel-1.16.0-8.1 [ 47s] [240/277] installing capi-appfw-package-manager-0.0.30-4.2 [ 47s] [241/277] installing aul-0.1.0-11.2 [ 48s] [242/277] installing evas-1.16.0-8.1 [ 48s] [243/277] installing ector-devel-1.16.0-8.1 [ 48s] [244/277] installing aul-devel-0.1.0-11.2 [ 48s] [245/277] installing app-core-common-1.2-2.1 [ 48s] [246/277] installing ecore-1.16.0-8.1 [ 48s] [247/277] installing app-svc-0.1.53-1.1 [ 48s] [248/277] installing efreet-1.16.0-8.1 [ 48s] [249/277] installing eldbus-1.16.0-8.1 [ 48s] [250/277] installing eeze-1.16.0-8.1 [ 48s] [251/277] installing eio-1.16.0-8.1 [ 48s] [252/277] installing evas-devel-1.16.0-8.1 [ 49s] [253/277] installing edje-1.16.0-8.1 [ 49s] [254/277] installing ecore-devel-1.16.0-8.1 [ 49s] [255/277] installing eldbus-devel-1.16.0-8.1 [ 49s] [256/277] installing efreet-devel-1.16.0-8.1 [ 49s] [257/277] installing eio-devel-1.16.0-8.1 [ 49s] [258/277] installing eeze-devel-1.16.0-8.1 [ 49s] [259/277] installing edje-tools-1.16.0-8.1 [ 49s] [260/277] installing emotion-1.16.0-8.1 [ 49s] [261/277] installing emotion-devel-1.16.0-8.1 [ 49s] [262/277] installing ethumb-1.16.0-8.1 [ 49s] [263/277] installing edje-devel-1.16.0-8.1 [ 49s] [264/277] installing ethumb-devel-1.16.0-8.1 [ 49s] [265/277] installing elementary-1.16.0-5.2 [ 49s] [266/277] installing app-core-efl-1.2-2.1 [ 49s] [267/277] installing elementary-devel-1.16.0-5.2 [ 49s] [268/277] installing app-core-common-devel-1.2-2.1 [ 50s] [269/277] installing capi-appfw-application-0.2.0-4.1 [ 50s] [270/277] installing capi-appfw-application-devel-0.2.0-4.1 [ 50s] [271/277] installing notification-0.2.41-3.1 [ 50s] [272/277] installing notification-devel-0.2.41-3.1 [ 50s] [273/277] installing alarm-server-0.4.178-6.1 [ 50s] [274/277] installing libalarm-0.4.178-6.1 [ 50s] [275/277] installing libalarm-devel-0.4.178-6.1 [ 50s] [276/277] installing context-common-0.9.9-1.1 [ 50s] [277/277] installing context-common-devel-0.9.9-1.1 [ 50s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 50s] now finalizing build dir... [ 51s] build target is armv7l-tizen-linux [ 51s] ----------------------------------------------------------------- [ 51s] I have the following modifications for capi-system-sensor.spec: [ 51s] 5c5 [ 51s] < Release: 0 [ 51s] --- [ 51s] > Release: 2.1 [ 51s] ----------------------------------------------------------------- [ 51s] ----- building capi-system-sensor.spec (user abuild) [ 51s] ----------------------------------------------------------------- [ 51s] ----------------------------------------------------------------- [ 51s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/cd5608f76fb175f5accf1fc3372be9cd-capi-system-sensor' -ba /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 51s] Building target platforms: armv7l-tizen-linux [ 51s] Building for target armv7l-tizen-linux [ 51s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UYcL88 [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + rm -rf capi-system-sensor-0.2.4 [ 51s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.2.4.tar.gz [ 51s] + /bin/tar -xf - [ 51s] + STATUS=0 [ 51s] + '[' 0 -ne 0 ']' [ 51s] + cd capi-system-sensor-0.2.4 [ 51s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 51s] + exit 0 [ 51s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.jHbI0J [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd capi-system-sensor-0.2.4 [ 51s] ++ uname -m [ 51s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 51s] + LANG=C [ 51s] + export LANG [ 51s] + unset DISPLAY [ 51s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 51s] + export CFLAGS [ 51s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 51s] + export CXXFLAGS [ 51s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 51s] + export FFLAGS [ 51s] + LDFLAGS= [ 51s] + export LDFLAGS [ 51s] + LD_AS_NEEDED=1 [ 51s] + export LD_AS_NEEDED [ 51s] ++ echo 0.2.4 [ 51s] ++ awk 'BEGIN {FS="."}{print $1}' [ 51s] + MAJORVER=0 [ 51s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 51s] + export CFLAGS [ 51s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 51s] + export CXXFLAGS [ 51s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 51s] + export FFLAGS [ 51s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.2.4 -DMAJORVER=0 -DPROFILE=wearable [ 51s] -- The C compiler identification is GNU 4.9.2 [ 51s] -- The CXX compiler identification is GNU 4.9.2 [ 51s] -- Check for working C compiler: /usr/bin/cc [ 51s] -- Check for working C compiler: /usr/bin/cc -- works [ 51s] -- Detecting C compiler ABI info [ 51s] -- Detecting C compiler ABI info - done [ 51s] -- Check for working CXX compiler: /usr/bin/c++ [ 51s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 51s] -- Detecting CXX compiler ABI info [ 51s] -- Detecting CXX compiler ABI info - done [ 51s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 51s] -- checking for module 'dlog sensor capi-base-common context-common' [ 52s] -- found dlog sensor capi-base-common context-common, version 1.0;2.0.9;0.4.12;0.9.9 [ 52s] -- Configuring done [ 52s] -- Generating done [ 52s] CMake Warning: [ 52s] Manually-specified variables were not used by the project: [ 52s] [ 52s] INCLUDE_INSTALL_DIR [ 52s] SHARE_INSTALL_PREFIX [ 52s] SYSCONF_INSTALL_DIR [ 52s] [ 52s] [ 52s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 [ 52s] + /bin/make -j8 [ 52s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 --check-build-system CMakeFiles/Makefile.cmake 0 [ 52s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles/progress.marks [ 52s] /bin/make -f CMakeFiles/Makefile2 all [ 52s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 52s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 52s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 52s] Scanning dependencies of target capi-system-sensor [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 52s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 52s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 1 [ 52s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 2 [ 52s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 3 [ 52s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 4 [ 52s] [ 25%] [ 50%] [ 75%] [100%] Building C object CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o [ 52s] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 52s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 -o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/src/geomagnetic_field.c [ 52s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 52s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 -o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/src/fusion_util.c [ 52s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -pthread -I/usr/include/context-service/internal -I/usr/include/json-glib-1.0 -I/usr/include/notification -I/usr/include/appfw -I/usr/include/vconf -I/usr/include/appfw -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 -o CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/src/sensor.cpp [ 52s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o [ 52s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -pthread -I/usr/include/context-service/internal -I/usr/include/json-glib-1.0 -I/usr/include/notification -I/usr/include/appfw -I/usr/include/vconf -I/usr/include/appfw -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 -o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/src/sensor_recorder.cpp [ 54s] Linking CXX shared library libcapi-system-sensor.so [ 54s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-sensor.dir/link.txt --verbose=1 [ 54s] /usr/bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -pthread -I/usr/include/context-service/internal -I/usr/include/json-glib-1.0 -I/usr/include/notification -I/usr/include/appfw -I/usr/include/vconf -I/usr/include/appfw -I/usr/include/appcore -I/usr/include/sensor -I/usr/include/aul -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -shared -Wl,-soname,libcapi-system-sensor.so.0 -o libcapi-system-sensor.so.0.2.4 CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -lsensor -lvconf -lctx-shared -lctx-server -lctx-client -ljson-glib-1.0 -lgio-2.0 -lsqlite3 -lalarm -lgobject-2.0 -ldlog -lnotification -lbundle -lglib-2.0 -lcapi-appfw-application -lcapi-appfw-app-control -lcapi-appfw-preference -lcapi-appfw-app-common -lcapi-appfw-event -lcapi-base-common -lappcore-common -ltzplatform-config-2.0 [ 54s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-sensor.so.0.2.4 libcapi-system-sensor.so.0 libcapi-system-sensor.so [ 54s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 1 2 3 4 [ 54s] [100%] Built target capi-system-sensor [ 54s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 0 [ 54s] + exit 0 [ 54s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.brnKRs [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd capi-system-sensor-0.2.4 [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm [ 54s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm [ 54s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm install [ 54s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 --check-build-system CMakeFiles/Makefile.cmake 0 [ 54s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles/progress.marks [ 54s] /bin/make -f CMakeFiles/Makefile2 all [ 54s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 54s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 54s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 54s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] make[2]: Nothing to be done for 'CMakeFiles/capi-system-sensor.dir/build'. [ 54s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 1 2 3 4 [ 54s] [100%] Built target capi-system-sensor [ 54s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4/CMakeFiles 0 [ 54s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 54s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] make[1]: Nothing to be done for 'preinstall'. [ 54s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4' [ 54s] Install the project... [ 54s] /usr/bin/cmake -P cmake_install.cmake [ 54s] -- Install configuration: "" [ 54s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/lib/pkgconfig/capi-system-sensor.pc [ 54s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/lib/libcapi-system-sensor.so.0.2.4 [ 54s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/lib/libcapi-system-sensor.so.0 [ 54s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/lib/libcapi-system-sensor.so [ 54s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/include/sensor/sensor.h [ 54s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/info/dir [ 54s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm -regex '.*\.la$' [ 54s] + xargs rm -f -- [ 54s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm -regex '.*\.a$' [ 54s] + xargs rm -f -- [ 54s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.4 [ 54s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/lib/libcapi-system-sensor.so.0.2.4 [ 54s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 54s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 54s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 54s] 225 blocks [ 54s] + /usr/lib/rpm/check-buildroot [ 54s] + /usr/lib/rpm//brp-compress [ 54s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 55s] + /usr/lib/rpm/brp-python-hardlink [ 55s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm [ 55s] Processing files: capi-system-sensor-0.2.4-2.1.armv7l [ 55s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 55s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 55s] [ 55s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.T5z2Sc [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd capi-system-sensor-0.2.4 [ 55s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/licenses/capi-system-sensor [ 55s] + export LICENSEDIR [ 55s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/licenses/capi-system-sensor [ 55s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/licenses/capi-system-sensor [ 55s] + exit 0 [ 55s] Provides: capi-system-sensor = 0.2.4-2.1 capi-system-sensor(armv7l-32) = 0.2.4-2.1 libcapi-system-sensor.so.0 [ 55s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 55s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 55s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 55s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 55s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libctx-client.so.0 libctx-shared.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libsensor.so.2 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 55s] Processing files: capi-system-sensor-debugsource-0.2.4-2.1.armv7l [ 55s] Provides: capi-system-sensor-debugsource = 0.2.4-2.1 capi-system-sensor-debugsource(armv7l-32) = 0.2.4-2.1 [ 55s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 55s] Processing files: capi-system-sensor-devel-0.2.4-2.1.armv7l [ 55s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 55s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 55s] [ 55s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.4UX3ZW [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd capi-system-sensor-0.2.4 [ 55s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/licenses/capi-system-sensor-devel [ 55s] + export LICENSEDIR [ 55s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/licenses/capi-system-sensor-devel [ 55s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm/usr/share/licenses/capi-system-sensor-devel [ 55s] + exit 0 [ 55s] Provides: capi-system-sensor-devel = 0.2.4-2.1 capi-system-sensor-devel(armv7l-32) = 0.2.4-2.1 pkgconfig(capi-system-sensor) = 0.2.4 [ 55s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 55s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0 pkgconfig(capi-base-common) pkgconfig(context-common) pkgconfig(dlog) pkgconfig(sensor) [ 55s] Processing files: capi-system-sensor-debuginfo-0.2.4-2.1.armv7l [ 55s] Provides: capi-system-sensor-debuginfo = 0.2.4-2.1 capi-system-sensor-debuginfo(armv7l-32) = 0.2.4-2.1 [ 55s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 55s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm [ 55s] warning: Could not canonicalize hostname: obspw16 [ 55s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.4-2.1.src.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.2.4-2.1.armv7l.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.2.4-2.1.armv7l.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.2.4-2.1.armv7l.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.2.4-2.1.armv7l.rpm [ 55s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6sz4Xu [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd capi-system-sensor-0.2.4 [ 55s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.4-2.1.arm [ 55s] + exit 0 [ 55s] ... checking for files with abuild user/group [ 55s] ... creating baselibs [ 56s] ... comparing built packages with the former built [ 56s] /usr/lib/build/pkg-diff.sh [ 56s] compare /.build.oldpackages/capi-system-sensor-0.2.4-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.4-2.1.src.rpm [ 56s] This is not a prerelease project. Compare the project name. [ 56s] comparing rpmtags [ 56s] comparing RELEASE [ 56s] comparing PROVIDES [ 56s] comparing scripts [ 56s] comparing filelist [ 56s] comparing file checksum [ 56s] RPM meta information is identical [ 56s] compare /.build.oldpackages/capi-system-sensor-0.2.4-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.2.4-2.1.armv7l.rpm [ 56s] Comparing capi-system-sensor-0.2.4-1.1.armv7l.rpm to capi-system-sensor-0.2.4-2.1.armv7l.rpm [ 56s] This is not a prerelease project. Compare the project name. [ 56s] comparing rpmtags [ 56s] --- /tmp/tmp.XHaq107725/tmp.pcrT107754 2017-07-20 01:09:24.923158815 +0000 [ 56s] +++ /tmp/tmp.XHaq107725/tmp.DhDw107756 2017-07-20 01:09:24.931158739 +0000 [ 56s] @@ -8,4 +8,4 @@ [ 56s] cpio xz 5T [ 56s] [ 56s] (none) (none) (none) [ 56s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/1ff7d68d3ef8b9dc3abb7142148c3a93-capi-system-sensor Tizen:3.0:Wearable / target-circle [ 56s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/cd5608f76fb175f5accf1fc3372be9cd-capi-system-sensor Tizen:3.0:Wearable / target-circle [ 56s] RPM meta information is different [ 56s] compare /.build.oldpackages/capi-system-sensor-debuginfo-0.2.4-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.2.4-2.1.armv7l.rpm [ 56s] skipping -debuginfo package [ 56s] compare /.build.oldpackages/capi-system-sensor-debugsource-0.2.4-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.2.4-2.1.armv7l.rpm [ 57s] Comparing capi-system-sensor-debugsource-0.2.4-1.1.armv7l.rpm to capi-system-sensor-debugsource-0.2.4-2.1.armv7l.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] --- /tmp/tmp.EISc107776/tmp.hyNe107794 2017-07-20 01:09:25.171156464 +0000 [ 57s] +++ /tmp/tmp.EISc107776/tmp.jxPc107796 2017-07-20 01:09:25.183156350 +0000 [ 57s] @@ -10,4 +10,4 @@ [ 57s] cpio xz 5T [ 57s] [ 57s] (none) (none) (none) [ 57s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/1ff7d68d3ef8b9dc3abb7142148c3a93-capi-system-sensor Tizen:3.0:Wearable / target-circle [ 57s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/cd5608f76fb175f5accf1fc3372be9cd-capi-system-sensor Tizen:3.0:Wearable / target-circle [ 57s] RPM meta information is different [ 57s] compare /.build.oldpackages/capi-system-sensor-devel-0.2.4-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.2.4-2.1.armv7l.rpm [ 57s] Comparing capi-system-sensor-devel-0.2.4-1.1.armv7l.rpm to capi-system-sensor-devel-0.2.4-2.1.armv7l.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] --- /tmp/tmp.izsI107814/tmp.PaHL107832 2017-07-20 01:09:25.403154264 +0000 [ 57s] +++ /tmp/tmp.izsI107814/tmp.Fhzu107834 2017-07-20 01:09:25.415154150 +0000 [ 57s] @@ -10,4 +10,4 @@ [ 57s] cpio xz 5T [ 57s] [ 57s] (none) (none) (none) [ 57s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/1ff7d68d3ef8b9dc3abb7142148c3a93-capi-system-sensor Tizen:3.0:Wearable / target-circle [ 57s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/cd5608f76fb175f5accf1fc3372be9cd-capi-system-sensor Tizen:3.0:Wearable / target-circle [ 57s] RPM meta information is different [ 57s] [ 57s] obspw16 finished "build capi-system-sensor.spec" at Thu Jul 20 01:09:25 UTC 2017. [ 57s] Retried build at Fri Jul 21 03:06:47 2017 returned same result, skipped Retried build at Mon Jul 24 03:44:50 2017 returned same result, skipped Retried build at Mon Jul 24 08:20:50 2017 returned same result, skipped Retried build at Fri Jul 28 01:18:46 2017 returned same result, skipped Retried build at Mon Jul 31 01:51:27 2017 returned same result, skipped Retried build at Thu Aug 3 01:33:02 2017 returned same result, skipped Retried build at Thu Aug 3 08:19:40 2017 returned same result, skipped Retried build at Fri Aug 4 02:09:14 2017 returned same result, skipped Retried build at Tue Aug 8 07:37:16 2017 returned same result, skipped Retried build at Wed Aug 9 22:50:56 2017 returned same result, skipped Retried build at Thu Aug 10 10:13:27 2017 returned same result, skipped Retried build at Fri Aug 11 10:02:22 2017 returned same result, skipped Retried build at Wed Aug 16 02:27:00 2017 returned same result, skipped Retried build at Wed Aug 16 13:39:02 2017 returned same result, skipped Retried build at Thu Aug 17 01:11:01 2017 returned same result, skipped Retried build at Fri Aug 18 00:40:17 2017 returned same result, skipped Retried build at Sun Aug 20 23:45:22 2017 returned same result, skipped Retried build at Wed Aug 23 22:41:10 2017 returned same result, skipped Retried build at Thu Aug 24 22:39:30 2017 returned same result, skipped Retried build at Sat Aug 26 02:29:48 2017 returned same result, skipped Retried build at Sat Sep 9 04:53:37 2017 returned same result, skipped Retried build at Fri Oct 13 12:27:49 2017 returned same result, skipped Retried build at Thu Oct 19 11:18:54 2017 returned same result, skipped Retried build at Thu Oct 26 01:24:11 2017 returned same result, skipped Retried build at Wed Nov 8 03:28:39 2017 returned same result, skipped