[ 0s] Memory limit set to 87947208KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw05 started "build _service:gbs:dos2unix.spec" at Wed Nov 8 02:51:08 UTC 2017. [ 0s] [ 0s] Building dos2unix for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 'df7ad51ff7a78c66c88c6ed7e5b50b0d' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling tar... [ 7s] [35/40] preinstalling libmount... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/91] installing libmagic-data-5.28-2.17 [ 8s] [2/91] installing setup-0.9-2.4 [ 8s] [3/91] installing terminfo-base-5.9-1.36 [ 8s] [4/91] installing filesystem-3.1-1.2 [ 8s] [5/91] installing glibc-2.20-3.2 [ 8s] [6/91] installing libatomic-4.9.2-1.15 [ 8s] [7/91] installing libgcc-4.9.2-1.15 [ 8s] [8/91] installing libgomp-4.9.2-1.15 [ 8s] [9/91] installing bash-3.2.57-2.1 [ 8s] [10/91] installing cpio-2.11-1.3 [ 8s] [11/91] installing diffutils-3.3-1.3 [ 8s] [12/91] installing findutils-4.3.8-1.37 [ 8s] [13/91] installing hostname-3.12-1.3 [ 9s] [14/91] installing libattr-2.4.47-1.36 [ 9s] [15/91] installing libbz2-1.0.6-1.58 [ 9s] [16/91] installing libcap-2.24-1.36 [ 9s] [17/91] installing libelf-0.153-1.36 [ 9s] [18/91] installing libext2fs-1.42.13-1.3 [ 9s] [19/91] installing libfreebl3-3.23-1.51 [ 9s] [20/91] installing libitm-4.9.2-1.15 [ 9s] [21/91] installing libltdl-2.4.2-1.40 [ 9s] [22/91] installing liblua-5.1.4-1.12 [ 9s] [23/91] installing liblzma-5.2.2-1.30 [ 9s] [24/91] installing libpcre-8.39-2.2 [ 9s] [25/91] installing libpopt-1.16-1.12 [ 9s] [26/91] installing libsmack-1.3.0-2.15 [ 9s] [27/91] installing libsmartcols-2.28-2.1 [ 9s] [28/91] installing libsqlite-3.8.10.2-2.2 [ 9s] [29/91] installing libstdc++-4.9.2-1.15 [ 9s] [30/91] installing libuuid-2.28-2.1 [ 9s] [31/91] installing m4-1.4.17-1.3 [ 9s] [32/91] installing net-tools-2.0_20121208git-1.3 [ 9s] [33/91] installing nspr-4.12-1.17 [ 9s] [34/91] installing patch-2.7-1.12 [ 9s] [35/91] installing pkg-config-0.28-1.39 [ 10s] [36/91] installing sed-4.1c-1.3 [ 10s] [37/91] installing update-alternatives-1.16.3-1.3 [ 10s] [38/91] installing which-2.20-1.3 [ 10s] [39/91] installing zlib-1.2.8-1.40 [ 10s] [40/91] installing libncurses-5.9-1.36 [ 10s] [41/91] installing build-compare-2015.04.28-1.29 [ 10s] [42/91] installing libstdc++-devel-4.9.2-1.15 [ 10s] [43/91] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 11s] [44/91] installing cpp-4.9.2-1.15 [ 12s] [45/91] installing gcc-c++-4.9.2-1.15 [ 12s] [46/91] installing binutils-2.25-1.11 [ 13s] [47/91] installing coreutils-6.9-1.3 [ 13s] [48/91] installing db4-4.8.30.NC-1.43 [ 13s] [49/91] installing gawk-3.1.5-1.3 [ 13s] [50/91] installing grep-2.5.2-1.3 [ 13s] [51/91] installing less-466-1.3 [ 13s] [52/91] installing libacl-2.2.52-1.37 [ 13s] [53/91] installing libasm-0.153-1.36 [ 13s] [54/91] installing libblkid-2.28-2.1 [ 13s] [55/91] installing libreadline-5.2-1.35 [ 13s] [56/91] installing libubsan-4.9.2-1.15 [ 13s] [57/91] installing make-4.0-1.12 [ 13s] [58/91] installing nss-certs-3.23-1.51 [ 13s] [59/91] installing smack-1.3.0-2.15 [ 13s] [60/91] installing bzip2-1.0.6-1.58 [ 13s] [61/91] installing gettext-runtime-0.19.7-1.20 [ 13s] [62/91] installing libmagic-5.28-2.17 [ 13s] [63/91] installing libxml2-2.9.4-2.32 [ 13s] [64/91] installing xz-5.2.2-1.30 [ 13s] [65/91] installing libdw-0.153-1.36 [ 13s] [66/91] installing linux-glibc-devel-3.10-1.41 [ 14s] [67/91] installing file-5.28-2.17 [ 14s] [68/91] installing glibc-locale-2.20-3.2 [ 14s] [69/91] installing tar-1.17-1.3 [ 14s] [70/91] installing gettext-tools-0.19.7-1.20 [ 14s] [71/91] installing gzip-1.3.12-1.36 [ 14s] [72/91] installing libfdisk1-2.28-2.1 [ 14s] [73/91] installing libmount-2.28-2.1 [ 14s] [74/91] installing pam-1.1.6-1.2 [ 14s] [75/91] installing perl-5.20.0-1.40 [ 16s] [76/91] installing tzdata-2016i-2.3 [ 16s] [77/91] installing elfutils-0.153-1.36 [ 16s] [78/91] installing gcc-4.9.2-1.15 [ 16s] [79/91] installing build-mkbaselibs-20120927-1.3 [ 16s] [80/91] installing glibc-devel-2.20-3.2 [ 17s] [81/91] installing qemu-accel-x86_64-armv7l-0.4-1.9 [ 21s] [82/91] installing autoconf-2.69-1.43 [ 21s] [83/91] installing util-linux-2.28-2.1 [ 21s] [84/91] installing automake-1.14.1-1.38 [ 21s] [85/91] installing util-linux-su-2.28-2.1 [ 21s] [86/91] installing build-20120927-1.3 [ 21s] [87/91] installing libtool-2.4.2-1.40 [ 21s] [88/91] installing nss-3.23-1.51 [ 21s] [89/91] installing libsoftokn3-3.23-1.51 [ 21s] [90/91] installing rpm-4.11.0.1-2.12 [ 22s] [91/91] installing rpm-build-4.11.0.1-2.12 [ 22s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 22s] now finalizing build dir... [ 22s] build target is armv7l-tizen-linux [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for dos2unix.spec: [ 22s] 4c4 [ 22s] < Release: 0 [ 22s] --- [ 22s] > Release: 1.6 [ 22s] ----------------------------------------------------------------- [ 22s] ----- building dos2unix.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/df7ad51ff7a78c66c88c6ed7e5b50b0d-dos2unix' -ba /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 22s] Building target platforms: armv7l-tizen-linux [ 22s] Building for target armv7l-tizen-linux [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.g2oTDb [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf dos2unix-6.0 [ 22s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd dos2unix-6.0 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + echo 'Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch):' [ 22s] Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-encoding-is-changed-from-latin1-to-utf8.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file man/es/man1/dos2unix.pod [ 22s] patching file man/nl/man1/dos2unix.pod [ 22s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 22s] + find . -type f [ 22s] + xargs chmod -x [ 23s] + exit 0 [ 23s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.svOLr9 [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd dos2unix-6.0 [ 23s] ++ uname -m [ 23s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 23s] + LANG=C [ 23s] + export LANG [ 23s] + unset DISPLAY [ 23s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 23s] + export CFLAGS [ 23s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 23s] + export CXXFLAGS [ 23s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 23s] + export FFLAGS [ 23s] + LDFLAGS= [ 23s] + export LDFLAGS [ 23s] + LD_AS_NEEDED=1 [ 23s] + export LD_AS_NEEDED [ 23s] + export RPM_OPT_FLAGS [ 23s] + make -j8 CC=gcc HTMLEXT=html [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c dos2unix.c -o dos2unix.o [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c querycp.c -o querycp.o [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c common.c -o common.o [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c unix2dos.c -o unix2dos.o [ 23s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 23s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 23s] msgfmt -c po/de.po -o po/de.mo [ 23s] msgfmt -c po/es.po -o po/es.mo [ 23s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 23s] and iconv() does not support "ISO-8859-1". [ 23s] Installing GNU libiconv and then reinstalling GNU gettext [ 23s] would fix this problem. [ 23s] Continuing anyway. [ 23s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 23s] msgfmt -c po/eo.po -o po/eo.mo [ 23s] msgfmt -c po/nl.po -o po/nl.mo [ 23s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 23s] and iconv() does not support "ISO-8859-1". [ 23s] Installing GNU libiconv and then reinstalling GNU gettext [ 23s] would fix this problem. [ 23s] Continuing anyway. [ 23s] make -C man/man1 [ 23s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 23s] # make target - create manual page from a *.pod page [ 23s] make -C man/man1 [ 23s] podchecker dos2unix.pod [ 23s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 23s] # make target - create manual page from a *.pod page [ 23s] podchecker dos2unix.pod [ 23s] # make target - create manual page from a *.pod page [ 23s] podchecker ../nl/man1/dos2unix.pod [ 23s] # make target - create manual page from a *.pod page [ 23s] podchecker ../es/man1/dos2unix.pod [ 23s] make -C man/man1 [ 23s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 23s] # make target - create manual page from a *.pod page [ 23s] podchecker dos2unix.pod [ 23s] # make target - create manual page from a *.pod page [ 23s] podchecker ../nl/man1/dos2unix.pod [ 23s] # make target - create manual page from a *.pod page [ 23s] podchecker ../nl/man1/dos2unix.pod [ 23s] dos2unix.pod pod syntax OK. [ 23s] dos2unix.pod pod syntax OK. [ 23s] LC_CTYPE=C pod2man \ [ 23s] --center="$(date "+%Y-%m-%d")" \ [ 23s] --name="dos2unix" \ [ 23s] --section="1" \ [ 23s] dos2unix.pod \ [ 23s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 23s] > dos2unix.1 && \ [ 23s] rm -f pod*.tmp [ 23s] LC_CTYPE=C pod2man \ [ 23s] --center="$(date "+%Y-%m-%d")" \ [ 23s] --name="dos2unix" \ [ 23s] --section="1" \ [ 23s] dos2unix.pod \ [ 23s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 23s] > dos2unix.1 && \ [ 23s] rm -f pod*.tmp [ 24s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o dos2unix [ 24s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o unix2dos [ 24s] # make target - create manual page from a *.pod page [ 24s] podchecker ../es/man1/dos2unix.pod [ 24s] ../nl/man1/dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] ../nl/man1/dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > ../nl/man1/dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 24s] ../es/man1/dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] ../es/man1/dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > ../es/man1/dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 24s] ../nl/man1/dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] ../nl/man1/dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > ../nl/man1/dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 24s] dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 24s] ../nl/man1/dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] ../nl/man1/dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > ../nl/man1/dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 24s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] dos2unix.1 [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] dos2unix.1 [ 25s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 25s] ../es/man1/dos2unix.pod pod syntax OK. [ 25s] ln -sf dos2unix mac2unix [ 25s] LC_CTYPE=C pod2man \ [ 25s] --center="$(date "+%Y-%m-%d")" \ [ 25s] --name="dos2unix" \ [ 25s] --section="1" \ [ 25s] ../es/man1/dos2unix.pod \ [ 25s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 25s] > ../es/man1/dos2unix.1 && \ [ 25s] rm -f pod*.tmp [ 25s] ln -sf unix2dos unix2mac [ 25s] # make target - create manual page from a *.pod page [ 25s] podchecker ../es/man1/dos2unix.pod [ 25s] POD document had syntax errors at /bin/pod2man line 71. [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] ../nl/man1/dos2unix.1 [ 25s] POD document had syntax errors at /bin/pod2man line 71. [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] ../es/man1/dos2unix.1 [ 25s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 25s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 25s] POD document had syntax errors at /bin/pod2man line 71. [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] ../nl/man1/dos2unix.1 [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] dos2unix.1 [ 25s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 25s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 25s] POD document had syntax errors at /bin/pod2man line 71. [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] ../nl/man1/dos2unix.1 [ 25s] ../es/man1/dos2unix.pod pod syntax OK. [ 25s] LC_CTYPE=C pod2man \ [ 25s] --center="$(date "+%Y-%m-%d")" \ [ 25s] --name="dos2unix" \ [ 25s] --section="1" \ [ 25s] ../es/man1/dos2unix.pod \ [ 25s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 25s] > ../es/man1/dos2unix.1 && \ [ 25s] rm -f pod*.tmp [ 26s] POD document had syntax errors at /bin/pod2man line 71. [ 26s] perl -pli.bak \ [ 26s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 26s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 26s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 26s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 26s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 26s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 26s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 26s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 26s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 26s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 26s] ../es/man1/dos2unix.1 [ 26s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 26s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 26s] POD document had syntax errors at /bin/pod2man line 71. [ 26s] perl -pli.bak \ [ 26s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 26s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 26s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 26s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 26s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 26s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 26s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 26s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 26s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 26s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 26s] ../es/man1/dos2unix.1 [ 27s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 27s] + exit 0 [ 27s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.pRZdph [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd dos2unix-6.0 [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm [ 27s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm install [ 27s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 27s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin [ 27s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin [ 27s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin; ln -sf dos2unix mac2unix [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin; ln -sf unix2dos unix2mac [ 28s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/man1 [ 28s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/man1 [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 28s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/es/man1/ ; [ 28s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/es/man1/ ; [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 28s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 28s] -- install-mo [ 28s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/nl/LC_MESSAGES ; [ 28s] install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 28s] -- install-doc [ 28s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/doc/dos2unix-6.0 [ 28s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/doc/dos2unix-6.0 [ 28s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/info/dir [ 28s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm -regex '.*\.la$' [ 28s] + xargs rm -f -- [ 28s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm -regex '.*\.a$' [ 28s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 28s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm dos2unix --all-name --with-man [ 28s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/share/help/': No such file or directory [ 28s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 28s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin/dos2unix [ 28s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm/usr/bin/unix2dos [ 28s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 28s] 284 blocks [ 28s] + /usr/lib/rpm/check-buildroot [ 29s] + /usr/lib/rpm//brp-compress [ 29s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 29s] + /usr/lib/rpm/brp-python-hardlink [ 29s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm [ 29s] Processing files: dos2unix-6.0-1.6.armv7l [ 29s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 29s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 29s] [ 29s] Provides: dos2unix = 6.0-1.6 dos2unix(armv7l-32) = 6.0-1.6 unix2dos = 6.0 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 29s] Obsoletes: unix2dos < 6.0 [ 29s] Processing files: dos2unix-debugsource-6.0-1.6.armv7l [ 29s] Provides: dos2unix-debugsource = 6.0-1.6 dos2unix-debugsource(armv7l-32) = 6.0-1.6 [ 29s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 29s] Processing files: dos2unix-debuginfo-6.0-1.6.armv7l [ 29s] warning: File listed twice: /usr/lib/debug/.build-id [ 29s] Provides: dos2unix-debuginfo = 6.0-1.6 dos2unix-debuginfo(armv7l-32) = 6.0-1.6 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm [ 29s] warning: Could not canonicalize hostname: obspw05 [ 29s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-1.6.src.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-1.6.armv7l.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-1.6.armv7l.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-1.6.armv7l.rpm [ 29s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.x7sFjq [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd dos2unix-6.0 [ 29s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.arm [ 29s] + exit 0 [ 29s] ... checking for files with abuild user/group [ 29s] ... creating baselibs [ 30s] ... comparing built packages with the former built [ 30s] /usr/lib/build/pkg-diff.sh [ 30s] compare /.build.oldpackages/dos2unix-6.0-1.5.src.rpm /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-1.6.src.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 30s] comparing RELEASE [ 30s] comparing PROVIDES [ 30s] comparing scripts [ 30s] comparing filelist [ 30s] comparing file checksum [ 30s] RPM meta information is identical [ 30s] compare /.build.oldpackages/dos2unix-6.0-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-1.6.armv7l.rpm [ 30s] Comparing dos2unix-6.0-1.5.armv7l.rpm to dos2unix-6.0-1.6.armv7l.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 30s] comparing RELEASE [ 30s] comparing PROVIDES [ 30s] comparing scripts [ 30s] comparing filelist [ 31s] comparing file checksum [ 31s] creating rename script [ 31s] RPM file checksum differs. [ 31s] Extracting packages [ 31s] /usr/share/man/es/man1/dos2unix.1 differs (troff or preprocessor input, ASCII text) [ 31s] --- old//usr/share/man/es/man1/dos2unix.1 2017-11-08 02:51:39.169308813 +0000 [ 31s] +++ new//usr/share/man/es/man1/dos2unix.1 2017-11-08 02:51:39.173308806 +0000 [ 31s] @@ -1,633 +0,0 @@ [ 31s] -.\" Overly verbose Pod::Man [ 31s] -.\" [ 31s] -.\" Standard preamble: [ 31s] -.\" ======================================================================== [ 31s] -.de Sp \" Vertical space (when we can't use .PP) [ 31s] -.if t .sp .5v [ 31s] -.if n .sp [ 31s] -.. [ 31s] -.de Vb \" Begin verbatim text [ 31s] -.ft CW [ 31s] -.nf [ 31s] -.ne \\$1 [ 31s] -.. [ 31s] -.de Ve \" End verbatim text [ 31s] -.ft R [ 31s] -.fi [ 31s] -.. [ 31s] -.\" Set up some character translations and predefined strings. \*(-- will [ 31s] -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left [ 31s] -.\" double quote, and \*(R" will give a right double quote. \*(C+ will [ 31s] -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and [ 31s] -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, [ 31s] -.\" nothing in troff, for use with C<>. [ 31s] -.tr \(*W- [ 31s] -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' [ 31s] -.ie n \{\ [ 31s] -. ds -- \(*W- [ 31s] -. ds PI pi [ 31s] -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch [ 31s] -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch [ 31s] -. ds L" "" [ 31s] -. ds R" "" [ 31s] -. ds C` "" [ 31s] -. ds C' "" [ 31s] -'br\} [ 31s] -.el\{\ [ 31s] -. ds -- \|\(em\| [ 31s] -. ds PI \(*p [ 31s] -. ds L" `` [ 31s] -. ds R" '' [ 31s] -. ds C` [ 31s] -. ds C' [ 31s] -'br\} [ 31s] -.\" [ 31s] -.\" Escape single quotes in literal strings from groff's Unicode transform. [ 31s] -.ie \n(.g .ds Aq \(aq [ 31s] -.el .ds Aq ' [ 31s] -.\" [ 31s] -.\" If the F register is turned on, we'll generate index entries on stderr for [ 31s] -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index [ 31s] -.\" entries marked with X<> in POD. Of course, you'll have to process the [ 31s] -.\" output yourself in some meaningful fashion. [ 31s] -.\" [ 31s] -.\" Avoid warning from groff about undefined register 'F'. [ 31s] -.de IX [ 31s] -.. [ 31s] -.nr rF 0 [ 31s] -.if \n(.g .if rF .nr rF 1 [ 31s] -.if (\n(rF:(\n(.g==0)) \{ [ 31s] -. if \nF \{ [ 31s] -. de IX [ 31s] -. tm Index:\\$1\t\\n%\t"\\$2" [ 31s] -.. [ 31s] -. if !\nF==2 \{ [ 31s] -. nr % 0 [ 31s] -. nr F 2 [ 31s] -. \} [ 31s] -. \} [ 31s] -.\} [ 31s] -.rr rF [ 31s] -.\" [ 31s] -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). [ 31s] -.\" Fear. Run. Save yourself. No user-serviceable parts. [ 31s] -. \" fudge factors for nroff and troff [ 31s] -.if n \{\ [ 31s] -. ds #H 0 [ 31s] -. ds #V .8m [ 31s] -. ds #F .3m [ 31s] -. ds #[ \f1 [ 31s] -. ds #] \fP [ 31s] -.\} [ 31s] -.if t \{\ [ 31s] -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) [ 31s] -. ds #V .6m [ 31s] -. ds #F 0 [ 31s] -. ds #[ \& [ 31s] -. ds #] \& [ 31s] -.\} [ 31s] -. \" simple accents for nroff and troff [ 31s] -.if n \{\ [ 31s] -. ds ' \& [ 31s] -. ds ` \& [ 31s] -. ds ^ \& [ 31s] -. ds , \& [ 31s] -. ds ~ ~ [ 31s] -. ds / [ 31s] -.\} [ 31s] -.if t \{\ [ 31s] -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" [ 31s] -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' [ 31s] -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' [ 31s] -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' [ 31s] -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' [ 31s] -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' [ 31s] -.\} [ 31s] -. \" troff and (daisy-wheel) nroff accents [ 31s] -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' [ 31s] -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' [ 31s] -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] [ 31s] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' [ 31s] -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' [ 31s] -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] [ 31s] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] [ 31s] -.ds ae a\h'-(\w'a'u*4/10)'e [ 31s] -.ds Ae A\h'-(\w'A'u*4/10)'E [ 31s] -. \" corrections for vroff [ 31s] -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' [ 31s] -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' [ 31s] -. \" for low resolution devices (crt and lpr) [ 31s] -.if \n(.H>23 .if \n(.V>19 \ [ 31s] -\{\ [ 31s] -. ds : e [ 31s] -. ds 8 ss [ 31s] -. ds o a [ 31s] -. ds d- d\h'-1'\(ga [ 31s] -. ds D- D\h'-1'\(hy [ 31s] -. ds th \o'bp' [ 31s] -. ds Th \o'LP' [ 31s] -. ds ae ae [ 31s] -. ds Ae AE [ 31s] -.\} [ 31s] -.rm #[ #] #H #V #F C [ 31s] -.\" ======================================================================== [ 31s] -.\" [ 31s] -.IX Title "dos2unix 1" [ 31s] -.TH dos2unix 1 "uq2000-02-02" "dos2unix" "uuu2000-05-05" [ 31s] -.\" For nroff, turn off justification. Always turn off hyphenation; it makes [ 31s] -.\" way too many mistakes in technical documents. [ 31s] -.if n .ad l [ 31s] -.nh [ 31s] -.SH "NOMBRE" [ 31s] -.IX Header "NOMBRE" [ 31s] -dos2unix \- Convertidor de archivos de texto de formato DOS/Mac a Unix y viceversa [ 31s] -.SH "SINOPSIS" [ 31s] -.IX Header "SINOPSIS" [ 31s] -.Vb 2 [ 31s] -\& dos2unix [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 31s] -\& unix2dos [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 31s] -.Ve [ 31s] -.SH "DESCRIPCI\['O]N" [ 31s] -.IX Header "DESCRIPCIO'N" [ 31s] -El paquete Dos2unix incluye las utiler\['i]as \f(CW\*(C`dos2unix\*(C'\fR y \f(CW\*(C`unix2dos\*(C'\fR para [ 31s] -convertir archivos de texto plano en formato \s-1DOS\s0 o Mac a formato Unix y viceversa. [ 31s] -.PP [ 31s] -En archivos de texto DOS/Windows, un salto de l\['i]nea, tambi\['e]n conocido como nueva [ 31s] -l\['i]nea, es una combinaci\['o]n de dos caracteres: un retorno de carro (\s-1CR\s0) seguido [ 31s] -por un salto de l\['i]nea (\s-1LF\s0). En archivos de texto Unix, un salto de l\['i]nea es [ 31s] -solamente un car\['a]cter: el salto de l\['i]nea (\s-1LF\s0). En archivos de texto Mac, antes [ 31s] -de Mac \s-1OS X,\s0 un salto de l\['i]nea era s\['o]lo un car\['a]cter retorno de carro (\s-1CR\s0). [ 31s] -Actualmente, Mac \s-1OS\s0 usa el estilo Unix de saltos de l\['i]nea (\s-1LF\s0). [ 31s] -.PP [ 31s] -Los archivos binarios son ignorados autom\['a]ticamente, a menos que se fuerce su [ 31s] -conversi\['o]n. [ 31s] -.PP [ 31s] -Los archivos no regulares, tales como directorios y \s-1FIFO,\s0 son ignorados [ 31s] -autom\['a]ticamente. [ 31s] -.PP [ 31s] -Los enlaces simb\['o]licos y sus destinos no son modificados por defecto. [ 31s] -Los enlaces simb\['o]licos pueden opcionalmente ser reemplazados, o la salida puede [ 31s] -ser escrita al archivo destino del enlace. [ 31s] -Los enlaces simb\['o]licos en Windows no est\['a]n soportados. Estos son siempre [ 31s] -reemplazados, sin que se alteren sus destinos. [ 31s] -.PP [ 31s] -Dos2unix fue moldeado a partir del dos2unix que existe en SunOS/Solaris y tiene [ 31s] -modos de conversi\['o]n similares. [ 31s] -.SH "PAR\['A]METROS" [ 31s] -.IX Header "PARA'METROS" [ 31s] -.IP "\fB\-\-\fR" 4 [ 31s] -.IX Item "--" [ 31s] -Todos los par\['a]metros siguientes son tratados como nombres de archivo. Use este [ 31s] -par\['a]metro si desea convertir archivos cuyos nombres inician con un gui\['o]n. Por [ 31s] -ejemplo para convertir un archivo llamado \*(L"\-foo\*(R", use este comando: [ 31s] -.Sp [ 31s] -.Vb 1 [ 31s] -\& dos2unix \-\- \-foo [ 31s] -.Ve [ 31s] -.Sp [ 31s] -O en modo de archivo nuevo: [ 31s] -.Sp [ 31s] -.Vb 1 [ 31s] -\& dos2unix \-n \-\- \-foo out.txt [ 31s] -.Ve [ 31s] -.IP "\fB\-ascii\fR" 4 [ 31s] -.IX Item "-ascii" [ 31s] -S\['o]lo convierte los salto de l\['i]nea. \['E]ste es el modo de conversi\['o]n por defecto. [ 31s] -.IP "\fB\-iso\fR" 4 [ 31s] -.IX Item "-iso" [ 31s] compare /.build.oldpackages/dos2unix-debuginfo-6.0-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-1.6.armv7l.rpm [ 31s] skipping -debuginfo package [ 31s] compare /.build.oldpackages/dos2unix-debugsource-6.0-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-1.6.armv7l.rpm [ 31s] Comparing dos2unix-debugsource-6.0-1.5.armv7l.rpm to dos2unix-debugsource-6.0-1.6.armv7l.rpm [ 31s] This is not a prerelease project. Compare the project name. [ 31s] comparing rpmtags [ 31s] comparing RELEASE [ 31s] comparing PROVIDES [ 31s] comparing scripts [ 31s] comparing filelist [ 31s] comparing file checksum [ 31s] creating rename script [ 31s] RPM meta information is identical [ 31s] [ 31s] obspw05 finished "build dos2unix.spec" at Wed Nov 8 02:51:39 UTC 2017. [ 31s]