[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw11 started "build _service:gbs:e-mod-tizen-wm-policy.spec" at Thu Aug 3 01:21:20 UTC 2017. [ 0s] [ 0s] Building e-mod-tizen-wm-policy for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '6942e9b265ee1e65100af70bebe4020b' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec build rpmlint-Factory ... [ 2s] copying qemu [ 2s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 2s] [ 2s] registering binfmt handlers for cross build [ 2s] interpreter for 'aarch64' is -1 [ 2s] write: Invalid argument [ 2s] /proc/sys/fs/binfmt_misc/register: write failed [ 2s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 2s] [ 2s] /.build/qemu-reg: No such file or directory [ 2s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 2s] /usr/lib/build/qemu-reg: No such file or directory [ 2s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling setup... [ 2s] [3/40] preinstalling filesystem... [ 2s] [4/40] preinstalling glibc... [ 2s] [5/40] preinstalling libgcc... [ 2s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 3s] [8/40] preinstalling grep... [ 3s] [9/40] preinstalling libattr... [ 3s] [10/40] preinstalling libbz2... [ 3s] [11/40] preinstalling libcap... [ 3s] [12/40] preinstalling libelf... [ 3s] [13/40] preinstalling libfreebl3... [ 3s] [14/40] preinstalling liblua... [ 3s] [15/40] preinstalling liblzma... [ 3s] [16/40] preinstalling libncurses... [ 3s] [17/40] preinstalling libpopt... [ 3s] [18/40] preinstalling libsmack... [ 3s] [19/40] preinstalling libsqlite... [ 3s] [20/40] preinstalling libuuid... [ 3s] [21/40] preinstalling nspr... [ 3s] [22/40] preinstalling sed... [ 3s] [23/40] preinstalling zlib... [ 3s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [26/40] preinstalling coreutils... [ 8s] [27/40] preinstalling libacl... [ 8s] [28/40] preinstalling libblkid... [ 8s] [29/40] preinstalling libreadline... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling tar... [ 8s] [35/40] preinstalling libmount... [ 8s] [36/40] preinstalling util-linux... [ 9s] [37/40] preinstalling util-linux-su... [ 9s] [38/40] preinstalling nss... [ 9s] [39/40] preinstalling libsoftokn3... [ 9s] [40/40] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: eina -> efl [ 9s] breaking dependency efl -> eina [ 9s] cycle: efl -> eo [ 9s] breaking dependency eo -> efl [ 9s] cycle: eina -> efl -> eo [ 9s] breaking dependency eo -> eina [ 9s] cycle: libsensord -> sensord [ 9s] breaking dependency libsensord -> sensord [ 9s] cycle: ecore -> eeze [ 9s] breaking dependency ecore -> eeze [ 9s] cycle: ecore -> eldbus [ 9s] breaking dependency ecore -> eldbus [ 9s] cycle: ecore -> evas [ 9s] breaking dependency evas -> ecore [ 9s] cycle: ecore-devel -> eeze-devel [ 9s] breaking dependency ecore-devel -> eeze-devel [ 9s] cycle: eldbus-devel -> ecore-devel [ 9s] breaking dependency ecore-devel -> eldbus-devel [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/238] installing default-ac-domains-0.1-1.1 [ 9s] [2/238] installing libmagic-data-5.28-2.11 [ 9s] [3/238] installing setup-0.9-2.3 [ 10s] [4/238] installing terminfo-base-5.9-1.30 [ 10s] [5/238] installing filesystem-3.1-1.2 [ 10s] [6/238] installing glibc-2.20-2.3 [ 10s] [7/238] installing libatomic-4.9.2-1.12 [ 10s] [8/238] installing libgcc-4.9.2-1.12 [ 10s] [9/238] installing libgomp-4.9.2-1.12 [ 10s] [10/238] installing bash-3.2.57-2.1 [ 10s] [11/238] installing capi-base-common-0.4.12-1.1 [ 10s] [12/238] installing cpio-2.11-1.3 [ 10s] [13/238] installing diffutils-3.3-1.3 [ 10s] [14/238] installing findutils-4.3.8-1.31 [ 10s] [15/238] installing fribidi-0.19.7-1.1 [ 10s] [16/238] installing gdbm-1.8.3-1.3 [ 10s] [17/238] installing giflib-5.1.2-1.1 [ 10s] [18/238] installing hostname-3.12-1.3 [ 10s] [19/238] installing iniparser-3.2-1.1 [ 10s] [20/238] installing libattr-2.4.47-1.30 [ 10s] [21/238] installing libbz2-1.0.6-1.52 [ 11s] [22/238] installing libcap-2.24-1.30 [ 11s] [23/238] installing libdrm-2.4.58-1.1 [ 11s] [24/238] installing libelf-0.153-1.32 [ 11s] [25/238] installing libelf0-0.8.13-1.3 [ 11s] [26/238] installing libevdev-1.2.2-1.1 [ 11s] [27/238] installing libexpat-2.2.0-1.29 [ 11s] [28/238] installing libext2fs-1.42.13-1.3 [ 11s] [29/238] installing libffi-3.1-1.3 [ 11s] [30/238] installing libfreebl3-3.23-1.46 [ 11s] [31/238] installing libhyphen-2.8.8-2.1 [ 11s] [32/238] installing libitm-4.9.2-1.12 [ 11s] [33/238] installing libjpeg-8.0.2-1.5 [ 11s] [34/238] installing libjson-0.12-1.1 [ 11s] [35/238] installing libltdl-2.4.2-1.34 [ 11s] [36/238] installing liblua-5.1.4-1.10 [ 11s] [37/238] installing liblzma-5.2.2-1.26 [ 12s] [38/238] installing libmtdev-1.1.5-1.1 [ 12s] [39/238] installing libogg-1.3.2-1.1 [ 12s] [40/238] installing libpcre-8.39-1.3 [ 12s] [41/238] installing libpopt-1.16-1.10 [ 12s] [42/238] installing libpython-2.7.8-1.15 [ 12s] [43/238] installing libsmack-1.3.0-2.9 [ 12s] [44/238] installing libsmartcols-2.28-2.1 [ 12s] [45/238] installing libsqlite-3.8.10.2-1.10 [ 12s] [46/238] installing libstdc++-4.9.2-1.12 [ 12s] [47/238] installing libuuid-2.28-2.1 [ 12s] [48/238] installing libwayland-egl-1.0-2.1 [ 12s] [49/238] installing libxkbcommon-0.4.3-1.1 [ 12s] [50/238] installing m4-1.4.17-1.3 [ 12s] [51/238] installing net-tools-2.0_20121208git-1.3 [ 12s] [52/238] installing nspr-4.12-1.15 [ 12s] [53/238] installing patch-2.7-1.10 [ 12s] [54/238] installing pixman-0.32.6-1.1 [ 12s] [55/238] installing pkg-config-0.28-1.33 [ 12s] [56/238] installing sed-4.1c-1.3 [ 12s] [57/238] installing update-alternatives-1.16.3-1.3 [ 13s] [58/238] installing which-2.20-1.3 [ 13s] [59/238] installing zlib-1.2.8-1.34 [ 13s] [60/238] installing libncurses-5.9-1.30 [ 13s] [61/238] installing shadow-utils-4.1.4.2-1.2 [ 13s] [62/238] installing build-compare-2015.04.28-1.25 [ 13s] [63/238] installing libstdc++-devel-4.9.2-1.12 [ 13s] [64/238] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 14s] [65/238] installing capi-base-common-devel-0.4.12-1.1 [ 14s] [66/238] installing cpp-4.9.2-1.12 [ 15s] [67/238] installing fribidi-devel-0.19.7-1.1 [ 15s] [68/238] installing gcc-c++-4.9.2-1.12 [ 15s] [69/238] installing libuuid-devel-2.28-2.1 [ 15s] [70/238] installing libxkbcommon-devel-0.4.3-1.1 [ 15s] [71/238] installing binutils-2.25-1.11 [ 16s] [72/238] installing coreutils-6.9-1.3 [ 16s] [73/238] installing db4-4.8.30.NC-1.37 [ 16s] [74/238] installing gawk-3.1.5-1.3 [ 16s] [75/238] installing grep-2.5.2-1.3 [ 16s] [76/238] installing less-466-1.3 [ 16s] [77/238] installing libacl-2.2.52-1.31 [ 16s] [78/238] installing libasm-0.153-1.32 [ 16s] [79/238] installing libblkid-2.28-2.1 [ 16s] [80/238] installing libcap-tools-2.24-1.30 [ 16s] [81/238] installing libglib-2.44.1-1.1 [ 16s] [82/238] installing libkms-2.4.58-1.1 [ 16s] [83/238] installing libopenssl-1.0.2k-2.1 [ 16s] [84/238] installing libpcreposix-8.39-1.3 [ 17s] [85/238] installing libpng-1.6.21-1.1 [ 17s] [86/238] installing libreadline-5.2-1.29 [ 17s] [87/238] installing libubsan-4.9.2-1.12 [ 17s] [88/238] installing libvorbis-1.3.4-1.1 [ 17s] [89/238] installing make-4.0-1.10 [ 17s] [90/238] installing nss-certs-3.23-1.46 [ 17s] [91/238] installing smack-1.3.0-2.9 [ 17s] [92/238] installing bzip2-1.0.6-1.52 [ 17s] [93/238] installing libicu-57.1-1.1 [ 18s] [94/238] installing libkmod-18-1.1 [ 18s] [95/238] installing libmagic-5.28-2.11 [ 18s] [96/238] installing libpcrecpp-8.39-1.3 [ 18s] [97/238] installing libxml2-2.9.4-2.26 [ 18s] [98/238] installing ttrace-1.0.3-2.1 [ 18s] [99/238] installing xz-5.2.2-1.26 [ 18s] [100/238] installing cynara-db-migration-0.14.10-1.1 [ 18s] [101/238] installing libdw-0.153-1.32 [ 19s] [102/238] installing libtiff-4.0.7-2.1 [ 19s] [103/238] installing libicu-devel-57.1-1.1 [ 19s] [104/238] installing linux-glibc-devel-3.10-1.35 [ 19s] [105/238] installing vconf-internal-keys-devel-0.0.159-3.1 [ 19s] [106/238] installing file-5.28-2.11 [ 19s] [107/238] installing glibc-locale-2.20-2.3 [ 19s] [108/238] installing libblkid-devel-2.28-2.1 [ 19s] [109/238] installing libgmodule-2.44.1-1.1 [ 19s] [110/238] installing libgthread-2.44.1-1.1 [ 19s] [111/238] installing openssl-1.0.2k-2.1 [ 19s] [112/238] installing security-config-1.0-4.1 [ 27s] usermod: user 'buxton' does not exist [ 27s] usermod: user 'dbus' does not exist [ 27s] [113/238] installing tar-1.17-1.3 [ 27s] [114/238] installing gzip-1.3.12-1.30 [ 27s] [115/238] installing libfdisk1-2.28-2.1 [ 27s] [116/238] installing libfreetype-2.6.5-1.1 [ 27s] [117/238] installing libgobject-2.44.1-1.1 [ 27s] [118/238] installing libmount-2.28-2.1 [ 27s] [119/238] installing libsndfile-1.0.26-3.1 [ 27s] [120/238] installing lua-5.1.4-1.10 [ 27s] [121/238] installing pam-1.1.6-1.2 [ 27s] [122/238] installing perl-5.20.0-1.35 [ 29s] [123/238] installing tzdata-2016i-1.1 [ 29s] [124/238] installing pcre-devel-8.39-1.3 [ 29s] [125/238] installing elfutils-0.153-1.32 [ 29s] [126/238] installing gcc-4.9.2-1.12 [ 30s] [127/238] installing libcynara-commons-0.14.10-1.1 [ 30s] [128/238] installing shared-mime-info-1.3-1.1 [ 38s] [129/238] installing python-2.7.8-1.15 [ 40s] [130/238] installing build-mkbaselibs-20120927-1.3 [ 40s] [131/238] installing glibc-devel-2.20-2.3 [ 40s] [132/238] installing qemu-accel-x86_64-armv7l-0.4-1.8 [ 47s] [133/238] installing autoconf-2.69-1.37 [ 47s] [134/238] installing libmount-devel-2.28-2.1 [ 47s] [135/238] installing lua-devel-5.1.4-1.10 [ 47s] [136/238] installing libcynara-client-0.14.10-1.1 [ 47s] [137/238] installing libcynara-creds-commons-0.14.10-1.1 [ 47s] [138/238] installing libcynara-session-0.14.10-1.1 [ 47s] [139/238] installing libdrm-devel-2.4.58-1.1 [ 47s] [140/238] installing python-xml-2.7.8-1.15 [ 47s] [141/238] installing libsystemd-219-7.1 [ 47s] [142/238] installing libharfbuzz-1.3.0-1.1 [ 48s] [143/238] installing fontconfig-2.12.1-1.1 [ 48s] [144/238] installing util-linux-2.28-2.1 [ 48s] [145/238] installing systemd-219-7.1 [ 48s] [146/238] installing systemd-devel-219-7.1 [ 48s] [147/238] installing zlib-devel-1.2.8-1.34 [ 49s] [148/238] installing automake-1.14.1-1.32 [ 49s] [149/238] installing dbus-libs-1.10.6-2.1 [ 49s] [150/238] installing libsndfile-devel-1.0.26-3.1 [ 49s] [151/238] installing util-linux-su-2.28-2.1 [ 49s] [152/238] installing build-20120927-1.3 [ 49s] [153/238] installing libcynara-creds-socket-0.14.10-1.1 [ 49s] [154/238] installing libdlog-0.5.1-1.1 [ 49s] [155/238] installing libinput-0.11.0-3.1 [ 49s] [156/238] installing dbus-devel-1.10.6-2.1 [ 49s] [157/238] installing libdlog-devel-0.5.1-1.1 [ 49s] [158/238] installing libinput-devel-0.11.0-3.1 [ 49s] [159/238] installing libtracker-1.0.1-2.1 [ 49s] [160/238] installing coregl-0.1.10-1.11 [ 49s] [161/238] installing libopenssl-devel-1.0.2k-2.1 [ 49s] [162/238] installing libtool-2.4.2-1.34 [ 49s] [163/238] installing libwayland-client-1.10.0-3.1 [ 50s] [164/238] installing libwayland-server-1.10.0-3.1 [ 50s] [165/238] installing libpng-devel-1.6.21-1.1 [ 50s] [166/238] installing libpulse-5.0-2.1 [ 50s] [167/238] installing capi-system-info-0.2.0-1.1 [ 50s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 50s] iniparser: cannot open /etc/info.ini [ 50s] [168/238] installing libwayland-extension-client-1.1.20-8.1 [ 50s] [169/238] installing libwayland-extension-server-1.1.20-8.1 [ 50s] [170/238] installing capi-system-info-devel-0.2.0-1.1 [ 50s] [171/238] installing libwayland-cursor-1.10.0-3.1 [ 50s] [172/238] installing libpulse-mainloop-glib-5.0-2.1 [ 50s] [173/238] installing ttrace-devel-1.0.3-2.1 [ 50s] [174/238] installing freetype2-devel-2.6.5-1.1 [ 50s] [175/238] installing libtbm-2.1.2-13.1 [ 50s] [176/238] installing fontconfig-devel-2.12.1-1.1 [ 50s] [177/238] installing libtbm-devel-2.1.2-13.1 [ 50s] [178/238] installing libwayland-tbm-client-0.1.23-5.1 [ 50s] [179/238] installing libwayland-tbm-server-0.1.23-5.1 [ 50s] [180/238] installing wayland-devel-1.10.0-3.1 [ 50s] [181/238] installing libtdm-1.7.4-11.1 [ 51s] [182/238] installing libtdm-devel-1.7.4-11.1 [ 51s] [183/238] installing wayland-extension-client-devel-1.1.20-8.1 [ 51s] [184/238] installing wayland-extension-server-devel-1.1.20-8.1 [ 51s] [185/238] installing libgbm-1.0.1-2.1 [ 51s] [186/238] installing libwayland-tbm-devel-0.1.23-5.1 [ 51s] [187/238] installing libtdm-client-1.7.4-11.1 [ 51s] [188/238] installing libgbm-devel-1.0.1-2.1 [ 51s] [189/238] installing libtdm-client-devel-1.7.4-11.1 [ 51s] [190/238] installing eo-1.16.0-10.2 [ 51s] [191/238] installing nss-3.23-1.46 [ 51s] [192/238] installing libgio-2.44.1-1.1 [ 51s] [193/238] installing gio-branding-upstream-2.44.1-1.1 [ 52s] [194/238] installing efl-1.16.0-10.2 [ 52s] [195/238] installing libsoftokn3-3.23-1.46 [ 52s] [196/238] installing glib2-tools-2.44.1-1.1 [ 52s] [197/238] installing rpm-4.11.0.1-2.8 [ 52s] [198/238] installing buxton2-1.2.0-6.1 [ 53s] warning: user buxton does not exist - using root [ 53s] warning: group buxton does not exist - using root [ 53s] warning: user buxton does not exist - using root [ 53s] warning: group buxton does not exist - using root [ 53s] Running buxton2 %posttrans script [ 53s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 53s] /etc/buxton2/*: No such file or directory [ 53s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 53s] /var/lib/buxton2/*: No such file or directory [ 53s] [199/238] installing eina-1.16.0-10.2 [ 53s] [200/238] installing vconf-compat-1.2.0-6.1 [ 53s] [201/238] installing glib2-devel-2.44.1-1.1 [ 53s] [202/238] installing rpm-build-4.11.0.1-2.8 [ 53s] [203/238] installing eina-devel-1.16.0-10.2 [ 53s] [204/238] installing embryo-1.16.0-10.2 [ 53s] [205/238] installing harfbuzz-devel-1.3.0-1.1 [ 53s] [206/238] installing libpulse-devel-5.0-2.1 [ 53s] [207/238] installing vconf-compat-devel-1.2.0-6.1 [ 54s] [208/238] installing ector-1.16.0-10.2 [ 54s] [209/238] installing emile-1.16.0-10.2 [ 54s] [210/238] installing capi-system-device-0.1.0-1.1 [ 54s] [211/238] installing libsensord-2.0.9-2.1 [ 54s] [212/238] installing embryo-devel-1.16.0-10.2 [ 54s] [213/238] installing eo-devel-1.16.0-10.2 [ 54s] [214/238] installing emile-devel-1.16.0-10.2 [ 54s] [215/238] installing libsensord-devel-2.0.9-2.1 [ 54s] [216/238] installing eet-1.16.0-10.2 [ 54s] [217/238] installing sensord-2.0.9-2.1 [ 54s] Running in chroot, ignoring request. [ 54s] [218/238] installing efl-devel-1.16.0-10.2 [ 54s] [219/238] installing eet-devel-1.16.0-10.2 [ 54s] [220/238] installing evas-1.16.0-10.2 [ 54s] [221/238] installing ector-devel-1.16.0-10.2 [ 54s] [222/238] installing ecore-1.16.0-10.2 [ 55s] [223/238] installing efreet-1.16.0-10.2 [ 55s] [224/238] installing eldbus-1.16.0-10.2 [ 55s] [225/238] installing tzsh-0.3.0-3.1 [ 55s] [226/238] installing eeze-1.16.0-10.2 [ 55s] [227/238] installing eio-1.16.0-10.2 [ 55s] [228/238] installing evas-devel-1.16.0-10.2 [ 55s] [229/238] installing edje-1.16.0-10.2 [ 55s] [230/238] installing ecore-devel-1.16.0-10.2 [ 55s] [231/238] installing eldbus-devel-1.16.0-10.2 [ 55s] [232/238] installing efreet-devel-1.16.0-10.2 [ 55s] [233/238] installing eio-devel-1.16.0-10.2 [ 55s] [234/238] installing eeze-devel-1.16.0-10.2 [ 55s] [235/238] installing edje-tools-1.16.0-10.2 [ 55s] [236/238] installing enlightenment-0.20.0-26.1 [ 55s] [237/238] installing edje-devel-1.16.0-10.2 [ 55s] [238/238] installing enlightenment-devel-0.20.0-26.1 [ 55s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 55s] now finalizing build dir... [ 56s] build target is armv7l-tizen-linux [ 56s] ----------------------------------------------------------------- [ 56s] I have the following modifications for e-mod-tizen-wm-policy.spec: [ 56s] 8c8 [ 56s] < Release: 1 [ 56s] --- [ 56s] > Release: 4.1 [ 56s] ----------------------------------------------------------------- [ 56s] ----- building e-mod-tizen-wm-policy.spec (user abuild) [ 56s] ----------------------------------------------------------------- [ 56s] ----------------------------------------------------------------- [ 56s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/6942e9b265ee1e65100af70bebe4020b-e-mod-tizen-wm-policy' -ba /home/abuild/rpmbuild/SOURCES/e-mod-tizen-wm-policy.spec [ 56s] Building target platforms: armv7l-tizen-linux [ 56s] Building for target armv7l-tizen-linux [ 56s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EIVAg4 [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + rm -rf e-mod-tizen-wm-policy-0.3.30 [ 56s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/e-mod-tizen-wm-policy-0.3.30.tar.bz2 [ 56s] + /bin/tar -xf - [ 56s] + STATUS=0 [ 56s] + '[' 0 -ne 0 ']' [ 56s] + cd e-mod-tizen-wm-policy-0.3.30 [ 56s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 56s] + exit 0 [ 56s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Ewvzs6 [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd e-mod-tizen-wm-policy-0.3.30 [ 56s] ++ uname -m [ 56s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 56s] + LANG=C [ 56s] + export LANG [ 56s] + unset DISPLAY [ 56s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 56s] + export CFLAGS [ 56s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 56s] + export CXXFLAGS [ 56s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 56s] + export FFLAGS [ 56s] + LDFLAGS= [ 56s] + export LDFLAGS [ 56s] + LD_AS_NEEDED=1 [ 56s] + export LD_AS_NEEDED [ 56s] + export 'CFLAGS+= -DE_LOGGING=1 -Werror-implicit-function-declaration' [ 56s] + CFLAGS+=' -DE_LOGGING=1 -Werror-implicit-function-declaration' [ 56s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DE_LOGGING=1 -Werror-implicit-function-declaration' [ 56s] + export CFLAGS [ 56s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 56s] + export CXXFLAGS [ 56s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 56s] + export FFLAGS [ 56s] + autoreconf -v --install --force [ 59s] autoreconf: Entering directory `.' [ 59s] autoreconf: configure.ac: not using Gettext [ 60s] autoreconf: running: aclocal --force -I m4 [ 63s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 63s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 63s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 63s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 63s] m4/libtool.m4:1018: _LT_SYS_MODULE_PATH_AIX is expanded from... [ 63s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 63s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 63s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 63s] m4/libtool.m4:67: LT_INIT is expanded from... [ 63s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 63s] configure.ac:26: the top level [ 63s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 63s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 63s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 63s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 63s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 63s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 63s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 63s] m4/libtool.m4:67: LT_INIT is expanded from... [ 63s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 63s] configure.ac:26: the top level [ 64s] autoreconf: configure.ac: tracing [ 65s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 65s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 65s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 65s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 65s] m4/libtool.m4:1018: _LT_SYS_MODULE_PATH_AIX is expanded from... [ 65s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 65s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 65s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 65s] m4/libtool.m4:67: LT_INIT is expanded from... [ 65s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 65s] configure.ac:26: the top level [ 65s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 65s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 65s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 65s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 65s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 65s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 65s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 65s] m4/libtool.m4:67: LT_INIT is expanded from... [ 65s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 65s] configure.ac:26: the top level [ 65s] autoreconf: running: libtoolize --copy --force [ 65s] libtoolize: putting auxiliary files in `.'. [ 65s] libtoolize: copying file `./ltmain.sh' [ 65s] libtoolize: putting macros in `m4'. [ 65s] libtoolize: copying file `m4/libtool.m4' [ 65s] libtoolize: copying file `m4/ltoptions.m4' [ 65s] libtoolize: copying file `m4/ltsugar.m4' [ 65s] libtoolize: copying file `m4/ltversion.m4' [ 65s] libtoolize: copying file `m4/lt~obsolete.m4' [ 65s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 65s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 70s] autoreconf: running: /usr/bin/autoconf --force [ 73s] autoreconf: running: /usr/bin/autoheader --force [ 75s] autoreconf: running: automake --add-missing --copy --force-missing [ 77s] configure.ac:11: installing './compile' [ 77s] configure.ac:9: installing './config.guess' [ 77s] configure.ac:9: installing './config.sub' [ 77s] configure.ac:13: installing './install-sh' [ 77s] configure.ac:13: installing './missing' [ 77s] Makefile.am: installing './INSTALL' [ 78s] src/Makefile.am: installing './depcomp' [ 78s] autoreconf: Leaving directory `.' [ 78s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-wayland-only --enable-auto-rotation [ 79s] checking build system type... armv7l-tizen-linux-gnueabi [ 79s] checking host system type... armv7l-tizen-linux-gnueabi [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 79s] checking whether the C compiler works... yes [ 79s] checking for C compiler default output file name... a.out [ 79s] checking for suffix of executables... [ 79s] checking whether we are cross compiling... no [ 79s] checking for suffix of object files... o [ 79s] checking whether we are using the GNU C compiler... yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 79s] checking for library containing strerror... none required [ 79s] checking for a BSD-compatible install... /usr/bin/install -c [ 79s] checking whether build environment is sane... yes [ 79s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 79s] checking for gawk... gawk [ 79s] checking whether make sets $(MAKE)... yes [ 79s] checking for style of include used by make... GNU [ 79s] checking whether make supports nested variables... yes [ 79s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 79s] checking whether make supports nested variables... (cached) yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 79s] checking whether we are using the GNU C compiler... (cached) yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 79s] checking whether we are using the GNU C compiler... (cached) yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 79s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 79s] checking for grep that handles long lines and -e... /usr/bin/grep [ 79s] checking for egrep... /usr/bin/grep -E [ 79s] checking for ANSI C header files... yes [ 80s] checking for an ANSI C-conforming const... yes [ 80s] checking for __attribute__... yes [ 80s] checking how to print strings... printf [ 80s] checking for a sed that does not truncate output... /usr/bin/sed [ 80s] checking for fgrep... /usr/bin/grep -F [ 80s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 80s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 80s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 80s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 80s] checking whether ln -s works... yes [ 80s] checking the maximum length of command line arguments... 1572864 [ 80s] checking whether the shell understands some XSI constructs... yes [ 80s] checking whether the shell understands "+="... yes [ 80s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 80s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 80s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 80s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 80s] checking for objdump... objdump [ 80s] checking how to recognize dependent libraries... pass_all [ 80s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 80s] checking for dlltool... no [ 80s] checking how to associate runtime and link libraries... printf %s\n [ 80s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 80s] checking for ar... ar [ 80s] checking for archiver @FILE support... @ [ 80s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 80s] checking for strip... strip [ 80s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 80s] checking for ranlib... ranlib [ 80s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 80s] checking for sysroot... no [ 80s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 80s] checking for mt... no [ 80s] checking if : is a manifest tool... no [ 80s] checking for sys/types.h... yes [ 80s] checking for sys/stat.h... yes [ 80s] checking for stdlib.h... yes [ 80s] checking for string.h... yes [ 80s] checking for memory.h... yes [ 80s] checking for strings.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for unistd.h... yes [ 80s] checking for dlfcn.h... yes [ 80s] checking for objdir... .libs [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 80s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 80s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 80s] checking whether -lc should be explicitly linked in... no [ 81s] checking dynamic linker characteristics... GNU/Linux ld.so [ 81s] checking how to hardcode library paths into programs... immediate [ 81s] checking whether stripping libraries is possible... yes [ 81s] checking if libtool supports shared libraries... yes [ 81s] checking whether to build shared libraries... yes [ 81s] checking whether to build static libraries... yes [ 81s] checking whether wayland-only version is enabled... checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 81s] checking pkg-config is at least version 0.9.0... yes [ 81s] checking for ENLIGHTENMENT... yes [ 81s] checking for CAPI_SYSTEM_INFO... yes [ 81s] checking for TTRACE... yes [ 81s] checking for dlopen in -ldl... yes [ 81s] checking whether auto rotation is enabled... yes [ 81s] checking for SENSORD... yes [ 81s] checking that generated files are newer than configure... done [ 81s] configure: creating ./config.status [ 82s] config.status: creating Makefile [ 82s] config.status: creating src/Makefile [ 82s] config.status: creating config.h [ 82s] config.status: executing depfiles commands [ 82s] config.status: executing libtool commands [ 83s] + make -j4 [ 83s] make all-recursive [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 83s] Making all in src [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30/src' [ 83s] CC module_la-e_mod_config.lo [ 83s] CC module_la-e_mod_main.lo [ 83s] CC module_la-tizen_policy_ext-protocol.lo [ 83s] CC module_la-e_mod_ivi_home.lo [ 83s] CC rotation/module_la-e_mod_rotation.lo [ 83s] CC rotation/module_la-e_mod_rotation_settings.lo [ 83s] CC rotation/module_la-e_mod_sensord.lo [ 83s] CC rotation/module_la-e_mod_rotation_wl.lo [ 85s] CCLD module.la [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30/src' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] + exit 0 [ 86s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.iKN09C [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd e-mod-tizen-wm-policy-0.3.30 [ 86s] + LANG=C [ 86s] + export LANG [ 86s] + unset DISPLAY [ 86s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm [ 86s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm [ 86s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm install [ 86s] Making install in src [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30/src' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30/src' [ 86s] make[2]: Nothing to be done for 'install-exec-am'. [ 86s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20' [ 86s] /bin/sh ../libtool --mode=install /usr/bin/install -c module.la '/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20' [ 86s] libtool: install: /usr/bin/install -c .libs/module.so /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20/module.so [ 86s] libtool: install: /usr/bin/install -c .libs/module.lai /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20/module.la [ 86s] libtool: install: /usr/bin/install -c .libs/module.a /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20/module.a [ 86s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20/module.a [ 86s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20/module.a [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30/src' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30/src' [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] make[2]: Nothing to be done for 'install-exec-am'. [ 86s] make[2]: Nothing to be done for 'install-data-am'. [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30' [ 86s] + rm -f /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/share/info/dir [ 86s] + find /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm -regex '.*\.la$' [ 86s] + xargs rm -f -- [ 86s] + find /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm -regex '.*\.a$' [ 86s] + xargs rm -f -- [ 86s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.30 [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnueabi-armv7l-ver-autocannoli-0.20/module.so [ 86s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 86s] 244 blocks [ 86s] + /usr/lib/rpm/check-buildroot [ 86s] + /usr/lib/rpm//brp-compress [ 86s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 86s] + /usr/lib/rpm/brp-python-hardlink [ 86s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm [ 86s] Processing files: e-mod-tizen-wm-policy-0.3.30-4.1.armv7l [ 86s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.vcdbxb [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd e-mod-tizen-wm-policy-0.3.30 [ 86s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/share/licenses/e-mod-tizen-wm-policy [ 86s] + export LICENSEDIR [ 86s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/share/licenses/e-mod-tizen-wm-policy [ 86s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/share/licenses/e-mod-tizen-wm-policy [ 86s] + cp -pr COPYING.Flora /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm/usr/share/licenses/e-mod-tizen-wm-policy [ 86s] + exit 0 [ 86s] Provides: e-mod-tizen-wm-policy = 0.3.30-4.1 e-mod-tizen-wm-policy(armv7l-32) = 0.3.30-4.1 module.so [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcapi-system-info.so.0 libecore.so.1 libeet.so.1 libeina.so.1 libevas.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libsensor.so.2 libttrace.so.1 libvconf.so.0 libvconf.so.0(VCONF_BUXTON_1.0) rtld(GNU_HASH) [ 86s] Processing files: e-mod-tizen-wm-policy-debugsource-0.3.30-4.1.armv7l [ 86s] Provides: e-mod-tizen-wm-policy-debugsource = 0.3.30-4.1 e-mod-tizen-wm-policy-debugsource(armv7l-32) = 0.3.30-4.1 [ 86s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 86s] Processing files: e-mod-tizen-wm-policy-debuginfo-0.3.30-4.1.armv7l [ 86s] Provides: e-mod-tizen-wm-policy-debuginfo = 0.3.30-4.1 e-mod-tizen-wm-policy-debuginfo(armv7l-32) = 0.3.30-4.1 [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm [ 86s] warning: Could not canonicalize hostname: obsnw11 [ 86s] Wrote: /home/abuild/rpmbuild/SRPMS/e-mod-tizen-wm-policy-0.3.30-4.1.src.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/e-mod-tizen-wm-policy-0.3.30-4.1.armv7l.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/e-mod-tizen-wm-policy-debugsource-0.3.30-4.1.armv7l.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/e-mod-tizen-wm-policy-debuginfo-0.3.30-4.1.armv7l.rpm [ 86s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.lUoTu0 [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd e-mod-tizen-wm-policy-0.3.30 [ 86s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.30-4.1.arm [ 86s] + exit 0 [ 86s] ... checking for files with abuild user/group [ 86s] ... creating baselibs [ 87s] ... comparing built packages with the former built [ 87s] /usr/lib/build/pkg-diff.sh [ 87s] compare /.build.oldpackages/e-mod-tizen-wm-policy-0.3.29-3.3.src.rpm /home/abuild/rpmbuild/SRPMS/e-mod-tizen-wm-policy-0.3.30-4.1.src.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] comparing RELEASE [ 87s] comparing PROVIDES [ 87s] comparing scripts [ 87s] comparing filelist [ 87s] comparing file checksum [ 87s] RPM meta information is identical [ 87s] compare /.build.oldpackages/e-mod-tizen-wm-policy-0.3.29-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/e-mod-tizen-wm-policy-0.3.30-4.1.armv7l.rpm [ 88s] Comparing e-mod-tizen-wm-policy-0.3.29-3.3.armv7l.rpm to e-mod-tizen-wm-policy-0.3.30-4.1.armv7l.rpm [ 88s] This is not a prerelease project. Compare the project name. [ 88s] comparing rpmtags [ 88s] --- /tmp/tmp.AyJGL49326/tmp.gJRWA49496 2017-08-03 01:22:48.097528092 +0000 [ 88s] +++ /tmp/tmp.AyJGL49326/tmp.QrIlU49505 2017-08-03 01:22:48.105528149 +0000 [ 88s] @@ -1,4 +1,4 @@ [ 88s] -e-mod-tizen-wm-policy 0.3.29 (none) [ 88s] +e-mod-tizen-wm-policy 0.3.30 (none) [ 88s] The Enlightenment WM Policy Module for Tizen [ 88s] The Enlightenment WM Policy Module for Tizen [ 88s] tizen [ 88s] @@ -8,4 +8,4 @@ [ 88s] cpio xz 5T [ 88s] [ 88s] (none) (none) (none) [ 88s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/caef5afb27915ec215b77ad6d0f93f9a-e-mod-tizen-wm-policy Tizen:3.0:Wearable / target-circle [ 88s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/6942e9b265ee1e65100af70bebe4020b-e-mod-tizen-wm-policy Tizen:3.0:Wearable / target-circle [ 88s] RPM meta information is different [ 88s] compare /.build.oldpackages/e-mod-tizen-wm-policy-debuginfo-0.3.29-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/e-mod-tizen-wm-policy-debuginfo-0.3.30-4.1.armv7l.rpm [ 88s] skipping -debuginfo package [ 88s] compare /.build.oldpackages/e-mod-tizen-wm-policy-debugsource-0.3.29-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/e-mod-tizen-wm-policy-debugsource-0.3.30-4.1.armv7l.rpm [ 88s] Comparing e-mod-tizen-wm-policy-debugsource-0.3.29-3.3.armv7l.rpm to e-mod-tizen-wm-policy-debugsource-0.3.30-4.1.armv7l.rpm [ 88s] This is not a prerelease project. Compare the project name. [ 88s] comparing rpmtags [ 88s] --- /tmp/tmp.wgWsL49712/tmp.XGqeT49892 2017-08-03 01:22:48.333529783 +0000 [ 88s] +++ /tmp/tmp.wgWsL49712/tmp.KyGQj49914 2017-08-03 01:22:48.345529869 +0000 [ 88s] @@ -1,4 +1,4 @@ [ 88s] -e-mod-tizen-wm-policy-debugsource 0.3.29 (none) [ 88s] +e-mod-tizen-wm-policy-debugsource 0.3.30 (none) [ 88s] Debug sources for package e-mod-tizen-wm-policy [ 88s] This package provides debug sources for package e-mod-tizen-wm-policy. [ 88s] Debug sources are useful when developing applications that use this [ 88s] @@ -10,4 +10,4 @@ [ 88s] cpio xz 5T [ 88s] [ 88s] (none) (none) (none) [ 88s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/caef5afb27915ec215b77ad6d0f93f9a-e-mod-tizen-wm-policy Tizen:3.0:Wearable / target-circle [ 88s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/6942e9b265ee1e65100af70bebe4020b-e-mod-tizen-wm-policy Tizen:3.0:Wearable / target-circle [ 88s] RPM meta information is different [ 88s] [ 88s] obsnw11 finished "build e-mod-tizen-wm-policy.spec" at Thu Aug 3 01:22:48 UTC 2017. [ 88s] Retried build at Thu Aug 3 08:10:05 2017 returned same result, skipped Retried build at Fri Aug 4 01:59:26 2017 returned same result, skipped Retried build at Tue Aug 8 07:23:53 2017 returned same result, skipped Retried build at Wed Aug 9 22:41:56 2017 returned same result, skipped Retried build at Thu Aug 10 10:01:15 2017 returned same result, skipped Retried build at Sun Aug 13 22:50:38 2017 returned same result, skipped Retried build at Wed Aug 16 02:15:29 2017 returned same result, skipped Retried build at Wed Aug 16 13:25:33 2017 returned same result, skipped Retried build at Thu Aug 17 01:00:20 2017 returned same result, skipped Retried build at Fri Aug 18 00:28:05 2017 returned same result, skipped Retried build at Wed Aug 23 22:32:37 2017 returned same result, skipped Retried build at Thu Aug 24 22:30:34 2017 returned same result, skipped Retried build at Sat Aug 26 02:20:18 2017 returned same result, skipped Retried build at Sat Sep 9 04:44:04 2017 returned same result, skipped Retried build at Wed Sep 20 09:44:41 2017 returned same result, skipped Retried build at Fri Oct 13 12:16:52 2017 returned same result, skipped Retried build at Thu Oct 19 11:06:03 2017 returned same result, skipped Retried build at Thu Oct 26 01:14:57 2017 returned same result, skipped Retried build at Wed Nov 8 03:14:21 2017 returned same result, skipped