[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obspw07 started "build _service:gbs:gssdp.spec" at Sat Apr 22 21:42:50 UTC 2017. [ 1s] [ 1s] Building gssdp for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 'fd61b22fd71ed7947cbb220cf85c8baa' [ 1s] [ 1s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:gssdp.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:gssdp.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling setup... [ 2s] [3/40] preinstalling filesystem... [ 2s] [4/40] preinstalling glibc... [ 2s] [5/40] preinstalling libgcc... [ 2s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 3s] [23/40] preinstalling zlib... [ 3s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/133] installing libmagic-data-5.28-1.19 [ 8s] [2/133] installing setup-0.9-1.8 [ 8s] [3/133] installing terminfo-base-5.9-1.21 [ 8s] [4/133] installing filesystem-3.1-1.2 [ 8s] [5/133] installing glibc-2.20-1.2 [ 8s] [6/133] installing libatomic-4.9.2-1.6 [ 8s] [7/133] installing libgcc-4.9.2-1.6 [ 8s] [8/133] installing libgomp-4.9.2-1.6 [ 9s] [9/133] installing bash-3.2.57-2.1 [ 9s] [10/133] installing cpio-2.11-1.3 [ 9s] [11/133] installing diffutils-3.3-1.3 [ 9s] [12/133] installing findutils-4.3.8-1.22 [ 9s] [13/133] installing hostname-3.12-1.3 [ 9s] [14/133] installing libattr-2.4.47-1.21 [ 9s] [15/133] installing libbz2-1.0.6-1.43 [ 9s] [16/133] installing libcap-2.24-1.21 [ 9s] [17/133] installing libelf-0.153-1.25 [ 9s] [18/133] installing libelf0-0.8.13-1.3 [ 9s] [19/133] installing libexpat-2.2.0-1.20 [ 9s] [20/133] installing libext2fs-1.42.13-1.2 [ 9s] [21/133] installing libffi-3.1-1.3 [ 9s] [22/133] installing libfreebl3-3.23-1.37 [ 9s] [23/133] installing libgmp-4.2.1-1.3 [ 10s] [24/133] installing libitm-4.9.2-1.6 [ 10s] [25/133] installing libltdl-2.4.2-1.25 [ 10s] [26/133] installing liblua-5.1.4-1.5 [ 10s] [27/133] installing liblzma-5.2.2-1.19 [ 10s] [28/133] installing libnettle-2.7.1-1.1 [ 10s] [29/133] installing libpcre-8.39-1.3 [ 10s] [30/133] installing libpopt-1.16-1.5 [ 10s] [31/133] installing libpython-2.7.8-1.11 [ 10s] [32/133] installing libsmack-1.3.0-1.20 [ 10s] [33/133] installing libsmartcols-2.28-1.3 [ 10s] [34/133] installing libsqlite-3.8.10.2-1.5 [ 10s] [35/133] installing libstdc++-4.9.2-1.6 [ 11s] [36/133] installing libtasn1-4.8-1.1 [ 11s] [37/133] installing libuuid-2.28-1.3 [ 11s] [38/133] installing m4-1.4.17-1.3 [ 11s] [39/133] installing net-tools-2.0_20121208git-1.3 [ 11s] [40/133] installing nspr-4.12-1.10 [ 11s] [41/133] installing patch-2.7-1.5 [ 11s] [42/133] installing pkg-config-0.28-1.24 [ 11s] [43/133] installing sed-4.1c-1.3 [ 11s] [44/133] installing update-alternatives-1.16.3-1.3 [ 11s] [45/133] installing which-2.20-1.3 [ 11s] [46/133] installing zlib-1.2.8-1.25 [ 11s] [47/133] installing libncurses-5.9-1.21 [ 11s] [48/133] installing libncurses6-5.9-1.21 [ 11s] [49/133] installing shadow-utils-4.1.4.2-1.2 [ 11s] [50/133] installing build-compare-2015.04.28-1.16 [ 11s] [51/133] installing libstdc++-devel-4.9.2-1.6 [ 12s] [52/133] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 13s] [53/133] installing cpp-4.9.2-1.6 [ 13s] [54/133] installing gcc-c++-4.9.2-1.6 [ 14s] [55/133] installing xz-devel-5.2.2-1.19 [ 14s] [56/133] installing binutils-2.25-1.11 [ 14s] [57/133] installing coreutils-6.9-1.3 [ 14s] [58/133] installing db4-4.8.30.NC-1.28 [ 14s] [59/133] installing gawk-3.1.5-1.3 [ 14s] [60/133] installing grep-2.5.2-1.3 [ 14s] [61/133] installing less-466-1.3 [ 14s] [62/133] installing libacl-2.2.52-1.22 [ 15s] [63/133] installing libasm-0.153-1.25 [ 15s] [64/133] installing libblkid-2.28-1.3 [ 15s] [65/133] installing libcap-tools-2.24-1.21 [ 15s] [66/133] installing libglib-2.44.1-1.1 [ 15s] [67/133] installing libopenssl-1.0.2j-1.22 [ 15s] [68/133] installing libpcreposix-8.39-1.3 [ 15s] [69/133] installing libreadline-5.2-1.20 [ 15s] [70/133] installing libubsan-4.9.2-1.6 [ 15s] [71/133] installing make-4.0-1.5 [ 15s] [72/133] installing nss-certs-3.23-1.37 [ 15s] [73/133] installing smack-1.3.0-1.20 [ 15s] [74/133] installing bzip2-1.0.6-1.43 [ 15s] [75/133] installing libhogweed-2.7.1-1.1 [ 15s] [76/133] installing libmagic-5.28-1.19 [ 16s] [77/133] installing libpcrecpp-8.39-1.3 [ 16s] [78/133] installing libxml2-2.9.4-2.17 [ 16s] [79/133] installing xz-5.2.2-1.19 [ 16s] [80/133] installing libdw-0.153-1.25 [ 16s] [81/133] installing ncurses-devel-5.9-1.21 [ 16s] [82/133] installing linux-glibc-devel-3.10-1.26 [ 16s] [83/133] installing readline-devel-5.2-1.20 [ 16s] [84/133] installing file-5.28-1.19 [ 16s] [85/133] installing glibc-locale-2.20-1.2 [ 17s] [86/133] installing libgmodule-2.44.1-1.1 [ 17s] [87/133] installing libgthread-2.44.1-1.1 [ 17s] [88/133] installing libmount-2.28-1.3 [ 17s] [89/133] installing security-config-1.0-1.1 [ 26s] usermod: user 'buxton' does not exist [ 26s] usermod: user 'dbus' does not exist [ 26s] [90/133] installing tar-1.17-1.3 [ 26s] [91/133] installing gzip-1.3.12-1.21 [ 26s] [92/133] installing libfdisk1-2.28-1.3 [ 26s] [93/133] installing libgobject-2.44.1-1.1 [ 26s] [94/133] installing libxml2-tools-2.9.4-2.17 [ 26s] [95/133] installing pam-1.1.6-1.2 [ 26s] [96/133] installing perl-5.20.0-1.27 [ 27s] [97/133] installing tzdata-2016i-1.1 [ 28s] [98/133] installing pcre-devel-8.39-1.3 [ 28s] [99/133] installing elfutils-0.153-1.25 [ 28s] [100/133] installing gcc-4.9.2-1.6 [ 28s] [101/133] installing libgnutls-3.3.5-1.1 [ 29s] [102/133] installing shared-mime-info-1.3-1.1 [ 36s] [103/133] installing python-2.7.8-1.11 [ 37s] [104/133] installing build-mkbaselibs-20120927-1.3 [ 37s] [105/133] installing ca-certificates-0.0.4-1.1 [ 37s] [106/133] installing glibc-devel-2.20-1.2 [ 37s] [107/133] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 41s] [108/133] installing autoconf-2.69-1.28 [ 42s] [109/133] installing python-xml-2.7.8-1.11 [ 42s] [110/133] installing libsystemd-219-1.1 [ 42s] [111/133] installing util-linux-2.28-1.3 [ 42s] [112/133] installing zlib-devel-1.2.8-1.25 [ 42s] [113/133] installing automake-1.14.1-1.23 [ 42s] [114/133] installing dbus-libs-1.10.6-1.1 [ 42s] [115/133] installing util-linux-su-2.28-1.3 [ 42s] [116/133] installing build-20120927-1.3 [ 42s] [117/133] installing libdlog-0.5.1-1.1 [ 43s] [118/133] installing dbus-devel-1.10.6-1.1 [ 43s] [119/133] installing libtool-2.4.2-1.25 [ 43s] [120/133] installing libxml2-devel-2.9.4-2.17 [ 43s] [121/133] installing nss-3.23-1.37 [ 43s] [122/133] installing libgio-2.44.1-1.1 [ 43s] [123/133] installing gio-branding-upstream-2.44.1-1.1 [ 43s] [124/133] installing dbus-glib-0.100.2-1.1 [ 43s] [125/133] installing libsoftokn3-3.23-1.37 [ 43s] [126/133] installing glib2-tools-2.44.1-1.1 [ 44s] [127/133] installing glib-networking-2.38.0-1.1 [ 44s] [128/133] installing rpm-4.11.0.1-1.14 [ 44s] [129/133] installing libsoup-2.46.0-1.1 [ 44s] [130/133] installing glib2-devel-2.44.1-1.1 [ 44s] [131/133] installing rpm-build-4.11.0.1-1.14 [ 44s] [132/133] installing libsoup-devel-2.46.0-1.1 [ 44s] [133/133] installing dbus-glib-devel-0.100.2-1.1 [ 44s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for gssdp.spec: [ 45s] 11c11 [ 45s] < Release: 1 [ 45s] --- [ 45s] > Release: 1.1 [ 45s] ----------------------------------------------------------------- [ 45s] ----- building gssdp.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/fd61b22fd71ed7947cbb220cf85c8baa-gssdp' -ba /home/abuild/rpmbuild/SOURCES/gssdp.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Fp2NBu [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf gssdp-0.14.4 [ 45s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gssdp-0.14.4.tar.xz [ 45s] + /bin/tar -xf - [ 46s] + STATUS=0 [ 46s] + '[' 0 -ne 0 ']' [ 46s] + cd gssdp-0.14.4 [ 46s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 46s] + echo 'Patch #0 (2788270-to-9eb6824.diff.gz):' [ 46s] Patch #0 (2788270-to-9eb6824.diff.gz): [ 46s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/2788270-to-9eb6824.diff.gz [ 46s] + /bin/patch -p1 --fuzz=2 [ 46s] patching file INSTALL [ 46s] patching file Makefile.in [ 46s] patching file aclocal.m4 [ 46s] patching file build-aux/depcomp [ 46s] patching file build-aux/missing [ 46s] patching file build-aux/test-driver [ 46s] patching file configure [ 46s] patching file doc/Makefile.in [ 46s] patching file doc/html/GSSDPClient.html [ 46s] patching file doc/html/GSSDPResourceBrowser.html [ 46s] patching file doc/html/GSSDPResourceGroup.html [ 46s] patching file doc/html/annotation-glossary.html [ 46s] patching file doc/html/ch01.html [ 46s] patching file doc/html/gssdp-Error-codes.html [ 46s] patching file doc/html/home.png [ 46s] patching file doc/html/index.html [ 46s] patching file doc/html/left.png [ 46s] patching file doc/html/right.png [ 46s] patching file doc/html/up.png [ 46s] patching file gssdp.manifest [ 46s] patching file gtk-doc.make [ 46s] patching file libgssdp/Makefile.in [ 46s] patching file m4/gtk-doc.m4 [ 46s] patching file m4/libtool.m4 [ 46s] patching file m4/ltoptions.m4 [ 46s] patching file m4/ltsugar.m4 [ 46s] patching file m4/ltversion.m4 [ 46s] patching file m4/lt~obsolete.m4 [ 46s] patching file tests/Makefile.in [ 46s] patching file tests/gtest/Makefile.in [ 46s] patching file tools/Makefile.in [ 46s] patching file vala/Makefile.in [ 46s] + exit 0 [ 46s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QA7SjJ [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd gssdp-0.14.4 [ 46s] ++ uname -m [ 46s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + LDFLAGS= [ 46s] + export LDFLAGS [ 46s] + LD_AS_NEEDED=1 [ 46s] + export LD_AS_NEEDED [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no [ 46s] checking for a BSD-compatible install... /usr/bin/install -c [ 47s] checking whether build environment is sane... yes [ 47s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 47s] checking for gawk... gawk [ 47s] checking whether make sets $(MAKE)... yes [ 47s] checking how to create a ustar tar archive... gnutar [ 47s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 47s] checking for style of include used by make... GNU [ 47s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 47s] checking whether the C compiler works... yes [ 47s] checking for C compiler default output file name... a.out [ 47s] checking for suffix of executables... [ 47s] checking whether we are cross compiling... no [ 47s] checking for suffix of object files... o [ 47s] checking whether we are using the GNU C compiler... yes [ 47s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 47s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 48s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 48s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 48s] checking what language compliance flags to pass to the C compiler... [ 48s] checking whether make supports nested variables... yes [ 48s] checking for library containing strerror... none required [ 48s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 48s] checking whether we are using the GNU C compiler... (cached) yes [ 48s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 48s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 48s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 48s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 48s] checking for grep that handles long lines and -e... /usr/bin/grep [ 48s] checking for egrep... /usr/bin/grep -E [ 48s] checking for ANSI C header files... yes [ 48s] checking build system type... armv7l-tizen-linux-gnueabi [ 48s] checking host system type... armv7l-tizen-linux-gnueabi [ 48s] checking how to print strings... printf [ 48s] checking for a sed that does not truncate output... /usr/bin/sed [ 48s] checking for fgrep... /usr/bin/grep -F [ 48s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 48s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 48s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 48s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 48s] checking whether ln -s works... yes [ 48s] checking the maximum length of command line arguments... 1572864 [ 48s] checking whether the shell understands some XSI constructs... yes [ 48s] checking whether the shell understands "+="... yes [ 48s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 48s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 48s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 48s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 48s] checking for objdump... objdump [ 48s] checking how to recognize dependent libraries... pass_all [ 48s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 48s] checking for dlltool... no [ 48s] checking how to associate runtime and link libraries... printf %s\n [ 48s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 48s] checking for ar... ar [ 48s] checking for archiver @FILE support... @ [ 48s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 48s] checking for strip... strip [ 48s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 48s] checking for ranlib... ranlib [ 48s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 48s] checking for sysroot... no [ 48s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 48s] checking for mt... no [ 48s] checking if : is a manifest tool... no [ 48s] checking for sys/types.h... yes [ 48s] checking for sys/stat.h... yes [ 48s] checking for stdlib.h... yes [ 48s] checking for string.h... yes [ 48s] checking for memory.h... yes [ 48s] checking for strings.h... yes [ 48s] checking for inttypes.h... yes [ 48s] checking for stdint.h... yes [ 48s] checking for unistd.h... yes [ 48s] checking for dlfcn.h... yes [ 48s] checking for objdir... .libs [ 48s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 48s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 48s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 48s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 48s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 48s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 48s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 48s] checking whether -lc should be explicitly linked in... no [ 49s] checking dynamic linker characteristics... GNU/Linux ld.so [ 49s] checking how to hardcode library paths into programs... immediate [ 49s] checking whether stripping libraries is possible... yes [ 49s] checking if libtool supports shared libraries... yes [ 49s] checking whether to build shared libraries... yes [ 49s] checking whether to build static libraries... yes [ 49s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 49s] checking pkg-config is at least version 0.9.0... yes [ 49s] checking for LIBGSSDP... yes [ 49s] checking for LIBGTK... no [ 49s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 49s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 49s] checking for Win32... no [ 49s] checking for gtkdoc-check... no [ 49s] checking for gtkdoc-rebase... no [ 49s] checking for gtkdoc-mkpdf... no [ 49s] checking whether to build gtk-doc documentation... no [ 49s] configure: creating ./config.status [ 49s] config.status: creating Makefile [ 49s] config.status: creating libgssdp/Makefile [ 50s] config.status: creating tools/Makefile [ 50s] config.status: creating tests/Makefile [ 50s] config.status: creating tests/gtest/Makefile [ 50s] config.status: creating vala/Makefile [ 50s] config.status: creating doc/Makefile [ 50s] config.status: creating doc/version.xml [ 50s] config.status: creating gssdp-1.0.pc [ 50s] config.status: creating gssdp-1.0-uninstalled.pc [ 50s] config.status: creating config.h [ 50s] config.status: executing depfiles commands [ 50s] config.status: executing libtool commands [ 50s] [ 50s] gssdp 0.14.4 [ 50s] --------------------- [ 50s] [ 50s] Prefix: /usr [ 50s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 50s] VALA bindings: no [ 50s] [ 50s] + make -j8 [ 50s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run aclocal-1.11 -I m4 [ 50s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: aclocal-1.11: command not found [ 50s] WARNING: `aclocal-1.11' is missing on your system. You should only need it if [ 50s] you modified `acinclude.m4' or `configure.ac'. You might want [ 50s] to install the `Automake' and `Perl' packages. Grab them from [ 50s] any GNU archive site. [ 51s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoconf [ 51s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run automake-1.11 --gnu [ 51s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: automake-1.11: command not found [ 51s] WARNING: `automake-1.11' is missing on your system. You should only need it if [ 51s] you modified `Makefile.am', `acinclude.m4' or `configure.ac'. [ 51s] You might want to install the `Automake' and `Perl' packages. [ 51s] Grab them from any GNU archive site. [ 54s] /bin/sh ./config.status --recheck [ 54s] running CONFIG_SHELL=/bin/sh /bin/sh ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no build_alias=armv7l-tizen-linux-gnueabi host_alias=armv7l-tizen-linux-gnueabi CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g LDFLAGS= --no-create --no-recursion [ 54s] checking for a BSD-compatible install... /usr/bin/install -c [ 55s] checking whether build environment is sane... yes [ 55s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 55s] checking for gawk... gawk [ 55s] checking whether make sets $(MAKE)... yes [ 55s] checking how to create a ustar tar archive... gnutar [ 55s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 55s] checking for style of include used by make... GNU [ 55s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 56s] checking whether the C compiler works... yes [ 56s] checking for C compiler default output file name... a.out [ 56s] checking for suffix of executables... [ 56s] checking whether we are cross compiling... no [ 56s] checking for suffix of object files... o [ 56s] checking whether we are using the GNU C compiler... yes [ 56s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 56s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 56s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 56s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 56s] checking what language compliance flags to pass to the C compiler... [ 56s] checking whether make supports nested variables... yes [ 56s] checking for library containing strerror... none required [ 56s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 56s] checking whether we are using the GNU C compiler... (cached) yes [ 56s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 56s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 56s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 56s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 56s] checking for grep that handles long lines and -e... /usr/bin/grep [ 56s] checking for egrep... /usr/bin/grep -E [ 56s] checking for ANSI C header files... yes [ 56s] checking build system type... armv7l-tizen-linux-gnueabi [ 56s] checking host system type... armv7l-tizen-linux-gnueabi [ 56s] checking how to print strings... printf [ 56s] checking for a sed that does not truncate output... /usr/bin/sed [ 56s] checking for fgrep... /usr/bin/grep -F [ 56s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 56s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 56s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 56s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 56s] checking whether ln -s works... yes [ 56s] checking the maximum length of command line arguments... 1572864 [ 56s] checking whether the shell understands some XSI constructs... yes [ 56s] checking whether the shell understands "+="... yes [ 56s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 56s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 56s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 56s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 56s] checking for objdump... objdump [ 56s] checking how to recognize dependent libraries... pass_all [ 56s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 56s] checking for dlltool... no [ 56s] checking how to associate runtime and link libraries... printf %s\n [ 56s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 56s] checking for ar... ar [ 56s] checking for archiver @FILE support... @ [ 56s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 56s] checking for strip... strip [ 56s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 56s] checking for ranlib... ranlib [ 57s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 57s] checking for sysroot... no [ 57s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 57s] checking for mt... no [ 57s] checking if : is a manifest tool... no [ 57s] checking for sys/types.h... yes [ 57s] checking for sys/stat.h... yes [ 57s] checking for stdlib.h... yes [ 57s] checking for string.h... yes [ 57s] checking for memory.h... yes [ 57s] checking for strings.h... yes [ 57s] checking for inttypes.h... yes [ 57s] checking for stdint.h... yes [ 57s] checking for unistd.h... yes [ 57s] checking for dlfcn.h... yes [ 57s] checking for objdir... .libs [ 57s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 57s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 57s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 57s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 57s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 57s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 57s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 57s] checking whether -lc should be explicitly linked in... no [ 57s] checking dynamic linker characteristics... GNU/Linux ld.so [ 57s] checking how to hardcode library paths into programs... immediate [ 57s] checking whether stripping libraries is possible... yes [ 57s] checking if libtool supports shared libraries... yes [ 57s] checking whether to build shared libraries... yes [ 57s] checking whether to build static libraries... yes [ 57s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 57s] checking pkg-config is at least version 0.9.0... yes [ 57s] checking for LIBGSSDP... yes [ 57s] checking for LIBGTK... no [ 58s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 58s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 58s] checking for Win32... no [ 58s] checking for gtkdoc-check... no [ 58s] checking for gtkdoc-rebase... no [ 58s] checking for gtkdoc-mkpdf... no [ 58s] checking whether to build gtk-doc documentation... no [ 58s] configure: creating ./config.status [ 58s] [ 58s] gssdp 0.14.4 [ 58s] --------------------- [ 58s] [ 58s] Prefix: /usr [ 58s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 58s] VALA bindings: no [ 58s] [ 58s] /bin/sh ./config.status [ 58s] config.status: creating Makefile [ 58s] config.status: creating libgssdp/Makefile [ 58s] config.status: creating tools/Makefile [ 58s] config.status: creating tests/Makefile [ 58s] config.status: creating tests/gtest/Makefile [ 58s] config.status: creating vala/Makefile [ 58s] config.status: creating doc/Makefile [ 58s] config.status: creating doc/version.xml [ 58s] config.status: creating gssdp-1.0.pc [ 58s] config.status: creating gssdp-1.0-uninstalled.pc [ 59s] config.status: creating config.h [ 59s] config.status: config.h is unchanged [ 59s] config.status: executing depfiles commands [ 59s] config.status: executing libtool commands [ 59s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoheader) [ 61s] rm -f stamp-h1 [ 61s] touch config.h.in [ 61s] cd . && /bin/sh ./config.status config.h [ 61s] config.status: creating config.h [ 61s] config.status: config.h is unchanged [ 61s] make all-recursive [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 61s] Making all in libgssdp [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 61s] make all-am [ 61s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 61s] CC gssdp-client.lo [ 61s] CC gssdp-error.lo [ 61s] CC gssdp-resource-browser.lo [ 61s] CC gssdp-resource-group.lo [ 61s] CC gssdp-socket-source.lo [ 61s] CC gssdp-socket-functions.lo [ 61s] CC gssdp-marshal.lo [ 62s] CCLD libgssdp-1.0.la [ 62s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] Making all in tests [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] Making all in gtest [ 62s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 62s] CC test-util.o [ 62s] AR libtestutil.a [ 62s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 62s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] CC test-browser.o [ 62s] CC test-publish.o [ 62s] CCLD test-browser [ 62s] CCLD test-publish [ 62s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] Making all in doc [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 62s] make[2]: Nothing to be done for 'all'. [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 62s] Making all in vala [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 62s] make[2]: Nothing to be done for 'all'. [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 62s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 62s] + exit 0 [ 62s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.qYMOtO [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd gssdp-0.14.4 [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 62s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 62s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 62s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm install [ 62s] Making install in libgssdp [ 62s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] /bin/make install-am [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib' [ 62s] /bin/sh ../libtool --mode=install /usr/bin/install -c libgssdp-1.0.la '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib' [ 62s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.so.3.0.0 [ 62s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3 || { rm -f libgssdp-1.0.so.3 && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3; }; }) [ 62s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so || { rm -f libgssdp-1.0.so && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so; }; }) [ 62s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.lai /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.la [ 62s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.a /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.a [ 62s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.a [ 62s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.a [ 62s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 62s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/include/gssdp-1.0/libgssdp' [ 62s] /usr/bin/install -c -m 644 gssdp-client.h gssdp-error.h gssdp-resource-browser.h gssdp-resource-group.h gssdp.h '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/include/gssdp-1.0/libgssdp' [ 62s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 62s] Making install in tests [ 62s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] Making install in gtest [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 62s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 62s] make[3]: Nothing to be done for 'install-exec-am'. [ 62s] make[3]: Nothing to be done for 'install-data-am'. [ 62s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] make[3]: Nothing to be done for 'install-exec-am'. [ 62s] make[3]: Nothing to be done for 'install-data-am'. [ 62s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 62s] Making install in doc [ 62s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 62s] make[2]: Nothing to be done for 'install-exec-am'. [ 62s] /usr/bin/install -c -m 644 ./html/GSSDPClient.html [ 62s] /usr/bin/install -c -m 644 ./html/GSSDPResourceBrowser.html [ 62s] /usr/bin/install -c -m 644 ./html/GSSDPResourceGroup.html [ 62s] /usr/bin/install -c -m 644 ./html/annotation-glossary.html [ 62s] /usr/bin/install -c -m 644 ./html/ch01.html [ 62s] /usr/bin/install -c -m 644 ./html/gssdp-Error-codes.html [ 62s] /usr/bin/install -c -m 644 ./html/gssdp.devhelp2 [ 63s] /usr/bin/install -c -m 644 ./html/home.png [ 63s] /usr/bin/install -c -m 644 ./html/index.html [ 63s] /usr/bin/install -c -m 644 ./html/index.sgml [ 63s] /usr/bin/install -c -m 644 ./html/left.png [ 63s] /usr/bin/install -c -m 644 ./html/right.png [ 63s] /usr/bin/install -c -m 644 ./html/style.css [ 63s] /usr/bin/install -c -m 644 ./html/up.png [ 63s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 63s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 63s] Making install in vala [ 63s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 63s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 63s] make[2]: Nothing to be done for 'install-exec-am'. [ 63s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 63s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 63s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 63s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 63s] make[2]: Nothing to be done for 'install-exec-am'. [ 63s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/pkgconfig' [ 63s] /usr/bin/install -c -m 644 gssdp-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/pkgconfig' [ 63s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 63s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 63s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/info/dir [ 63s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm -regex '.*\.la$' [ 63s] + xargs rm -f -- [ 63s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm -regex '.*\.a$' [ 63s] + xargs rm -f -- [ 63s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/gtk-doc [ 63s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4 [ 63s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/lib/libgssdp-1.0.so.3.0.0 [ 63s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 63s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 63s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 63s] 341 blocks [ 63s] + /usr/lib/rpm/check-buildroot [ 63s] + /usr/lib/rpm//brp-compress [ 63s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 63s] + /usr/lib/rpm/brp-python-hardlink [ 63s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 63s] Processing files: gssdp-0.14.4-1.1.armv7l [ 63s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 63s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 63s] [ 63s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.y9KDIW [ 63s] + umask 022 [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + cd gssdp-0.14.4 [ 63s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/licenses/gssdp [ 63s] + export LICENSEDIR [ 63s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/licenses/gssdp [ 63s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm/usr/share/licenses/gssdp [ 63s] + exit 0 [ 63s] Provides: gssdp = 0.14.4-1.1 gssdp(armv7l-32) = 0.14.4-1.1 libgssdp-1.0.so.3 [ 63s] Requires(interp): /bin/sh /bin/sh [ 63s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 63s] Requires(post): /bin/sh [ 63s] Requires(postun): /bin/sh [ 63s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libgssdp-1.0.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsoup-2.4.so.1 rtld(GNU_HASH) [ 63s] Processing files: gssdp-debugsource-0.14.4-1.1.armv7l [ 63s] Provides: gssdp-debugsource = 0.14.4-1.1 gssdp-debugsource(armv7l-32) = 0.14.4-1.1 [ 63s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 63s] Processing files: gssdp-devel-0.14.4-1.1.armv7l [ 63s] Provides: gssdp-devel = 0.14.4-1.1 gssdp-devel(armv7l-32) = 0.14.4-1.1 pkgconfig(gssdp-1.0) = 0.14.4 [ 63s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 63s] Requires: /usr/bin/pkg-config libgssdp-1.0.so.3 pkgconfig(gio-2.0) pkgconfig(gobject-2.0) [ 63s] Processing files: gssdp-debuginfo-0.14.4-1.1.armv7l [ 63s] Provides: gssdp-debuginfo = 0.14.4-1.1 gssdp-debuginfo(armv7l-32) = 0.14.4-1.1 [ 63s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 63s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 63s] warning: Could not canonicalize hostname: obspw07 [ 63s] Wrote: /home/abuild/rpmbuild/SRPMS/gssdp-0.14.4-1.1.src.rpm [ 63s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-0.14.4-1.1.armv7l.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debugsource-0.14.4-1.1.armv7l.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-devel-0.14.4-1.1.armv7l.rpm [ 64s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debuginfo-0.14.4-1.1.armv7l.rpm [ 64s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Iqs33Q [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd gssdp-0.14.4 [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-1.1.arm [ 64s] + exit 0 [ 64s] ... checking for files with abuild user/group [ 64s] ... creating baselibs [ 64s] [ 64s] obspw07 finished "build gssdp.spec" at Sat Apr 22 21:43:53 UTC 2017. [ 64s] Retried build at Fri May 26 12:39:22 2017 returned same result, skipped Retried build at Wed May 31 23:41:17 2017 returned same result, skipped Retried build at Fri Jun 2 00:35:48 2017 returned same result, skipped Retried build at Thu Jun 8 07:46:44 2017 returned same result, skipped Retried build at Fri Jun 9 09:37:49 2017 returned same result, skipped Retried build at Wed Jun 14 05:41:35 2017 returned same result, skipped Retried build at Wed Jun 14 23:03:56 2017 returned same result, skipped Retried build at Thu Jun 15 08:42:22 2017 returned same result, skipped Retried build at Mon Jun 19 08:25:55 2017 returned same result, skipped Retried build at Tue Jun 20 10:47:35 2017 returned same result, skipped Retried build at Fri Jun 30 08:36:37 2017 returned same result, skipped Retried build at Mon Jul 3 08:30:12 2017 returned same result, skipped Retried build at Wed Jul 5 23:31:29 2017 returned same result, skipped Retried build at Fri Jul 14 06:25:20 2017 returned same result, skipped Retried build at Thu Aug 3 01:29:11 2017 returned same result, skipped Retried build at Tue Aug 8 07:29:50 2017 returned same result, skipped Retried build at Sat Sep 9 04:50:32 2017 returned same result, skipped Retried build at Thu Oct 19 11:05:12 2017 returned same result, skipped Retried build at Wed Nov 8 03:20:20 2017 returned same result, skipped