[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw17 started "build _service:gbs:libslp-db-util.spec" at Sat Apr 22 21:20:50 UTC 2017. [ 0s] [ 0s] Building libslp-db-util for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '80672087d9fb182ace961c6af842f255' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:libslp-db-util.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:libslp-db-util.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:libslp-db-util.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: gio-branding-upstream -> libgio [ 7s] breaking dependency libgio -> gio-branding-upstream [ 7s] cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/119] installing libmagic-data-5.28-1.19 [ 7s] [2/119] installing setup-0.9-1.8 [ 7s] [3/119] installing terminfo-base-5.9-1.21 [ 7s] [4/119] installing filesystem-3.1-1.2 [ 7s] [5/119] installing glibc-2.20-1.2 [ 8s] [6/119] installing libatomic-4.9.2-1.6 [ 8s] [7/119] installing libgcc-4.9.2-1.6 [ 8s] [8/119] installing libgomp-4.9.2-1.6 [ 8s] [9/119] installing bash-3.2.57-2.1 [ 8s] [10/119] installing capi-base-common-0.4.12-1.1 [ 8s] [11/119] installing cpio-2.11-1.3 [ 8s] [12/119] installing diffutils-3.3-1.3 [ 8s] [13/119] installing findutils-4.3.8-1.22 [ 8s] [14/119] installing hostname-3.12-1.3 [ 8s] [15/119] installing libattr-2.4.47-1.21 [ 8s] [16/119] installing libbz2-1.0.6-1.43 [ 8s] [17/119] installing libcap-2.24-1.21 [ 8s] [18/119] installing libelf-0.153-1.25 [ 8s] [19/119] installing libelf0-0.8.13-1.3 [ 8s] [20/119] installing libexpat-2.2.0-1.20 [ 8s] [21/119] installing libext2fs-1.42.13-1.2 [ 8s] [22/119] installing libffi-3.1-1.3 [ 8s] [23/119] installing libfreebl3-3.23-1.37 [ 8s] [24/119] installing libitm-4.9.2-1.6 [ 8s] [25/119] installing libltdl-2.4.2-1.25 [ 8s] [26/119] installing liblua-5.1.4-1.5 [ 9s] [27/119] installing liblzma-5.2.2-1.19 [ 9s] [28/119] installing libpcre-8.39-1.3 [ 9s] [29/119] installing libpopt-1.16-1.5 [ 9s] [30/119] installing libpython-2.7.8-1.11 [ 9s] [31/119] installing libsmack-1.3.0-1.20 [ 9s] [32/119] installing libsmartcols-2.28-1.3 [ 9s] [33/119] installing libsqlite-3.8.10.2-1.5 [ 9s] [34/119] installing libstdc++-4.9.2-1.6 [ 9s] [35/119] installing libuuid-2.28-1.3 [ 9s] [36/119] installing m4-1.4.17-1.3 [ 9s] [37/119] installing net-tools-2.0_20121208git-1.3 [ 9s] [38/119] installing nspr-4.12-1.10 [ 9s] [39/119] installing patch-2.7-1.5 [ 9s] [40/119] installing pkg-config-0.28-1.24 [ 9s] [41/119] installing sed-4.1c-1.3 [ 9s] [42/119] installing update-alternatives-1.16.3-1.3 [ 9s] [43/119] installing which-2.20-1.3 [ 9s] [44/119] installing zlib-1.2.8-1.25 [ 9s] [45/119] installing libncurses-5.9-1.21 [ 9s] [46/119] installing build-compare-2015.04.28-1.16 [ 10s] [47/119] installing libstdc++-devel-4.9.2-1.6 [ 10s] [48/119] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 11s] [49/119] installing capi-base-common-devel-0.4.12-1.1 [ 11s] [50/119] installing cpp-4.9.2-1.6 [ 11s] [51/119] installing gcc-c++-4.9.2-1.6 [ 12s] [52/119] installing binutils-2.25-1.11 [ 12s] [53/119] installing coreutils-6.9-1.3 [ 12s] [54/119] installing db4-4.8.30.NC-1.28 [ 13s] [55/119] installing gawk-3.1.5-1.3 [ 13s] [56/119] installing grep-2.5.2-1.3 [ 13s] [57/119] installing less-466-1.3 [ 13s] [58/119] installing libacl-2.2.52-1.22 [ 13s] [59/119] installing libasm-0.153-1.25 [ 13s] [60/119] installing libblkid-2.28-1.3 [ 13s] [61/119] installing libglib-2.44.1-1.1 [ 13s] [62/119] installing libopenssl-1.0.2j-1.22 [ 13s] [63/119] installing libpcreposix-8.39-1.3 [ 13s] [64/119] installing libreadline-5.2-1.20 [ 13s] [65/119] installing libubsan-4.9.2-1.6 [ 13s] [66/119] installing make-4.0-1.5 [ 13s] [67/119] installing nss-certs-3.23-1.37 [ 13s] [68/119] installing smack-1.3.0-1.20 [ 13s] [69/119] installing bzip2-1.0.6-1.43 [ 13s] [70/119] installing libicu-57.1-1.1 [ 14s] [71/119] installing libmagic-5.28-1.19 [ 14s] [72/119] installing libpcrecpp-8.39-1.3 [ 14s] [73/119] installing libxml2-2.9.4-2.17 [ 14s] [74/119] installing xz-5.2.2-1.19 [ 14s] [75/119] installing libdw-0.153-1.25 [ 14s] [76/119] installing libicu-devel-57.1-1.1 [ 14s] [77/119] installing linux-glibc-devel-3.10-1.26 [ 15s] [78/119] installing file-5.28-1.19 [ 15s] [79/119] installing glibc-locale-2.20-1.2 [ 15s] [80/119] installing libgmodule-2.44.1-1.1 [ 15s] [81/119] installing libgthread-2.44.1-1.1 [ 15s] [82/119] installing libmount-2.28-1.3 [ 15s] [83/119] installing tar-1.17-1.3 [ 15s] [84/119] installing gzip-1.3.12-1.21 [ 15s] [85/119] installing libfdisk1-2.28-1.3 [ 15s] [86/119] installing libgobject-2.44.1-1.1 [ 15s] [87/119] installing pam-1.1.6-1.2 [ 15s] [88/119] installing sqlite-3.8.10.2-1.5 [ 16s] [89/119] installing perl-5.20.0-1.27 [ 17s] [90/119] installing tzdata-2016i-1.1 [ 17s] [91/119] installing pcre-devel-8.39-1.3 [ 17s] [92/119] installing elfutils-0.153-1.25 [ 17s] [93/119] installing gcc-4.9.2-1.6 [ 17s] [94/119] installing shared-mime-info-1.3-1.1 [ 24s] [95/119] installing libarchive-3.1.2-1.3 [ 24s] [96/119] installing python-2.7.8-1.11 [ 25s] [97/119] installing build-mkbaselibs-20120927-1.3 [ 25s] [98/119] installing glibc-devel-2.20-1.2 [ 25s] [99/119] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 29s] [100/119] installing autoconf-2.69-1.28 [ 29s] [101/119] installing python-xml-2.7.8-1.11 [ 29s] [102/119] installing libsystemd-219-1.1 [ 29s] [103/119] installing cmake-2.8.12.2-1.4 [ 30s] [104/119] installing util-linux-2.28-1.3 [ 30s] [105/119] installing automake-1.14.1-1.23 [ 30s] [106/119] installing sqlite-devel-3.8.10.2-1.5 [ 30s] [107/119] installing util-linux-su-2.28-1.3 [ 30s] [108/119] installing build-20120927-1.3 [ 30s] [109/119] installing libdlog-0.5.1-1.1 [ 30s] [110/119] installing libdlog-devel-0.5.1-1.1 [ 30s] [111/119] installing libtool-2.4.2-1.25 [ 30s] [112/119] installing nss-3.23-1.37 [ 30s] [113/119] installing libgio-2.44.1-1.1 [ 31s] [114/119] installing gio-branding-upstream-2.44.1-1.1 [ 31s] [115/119] installing libsoftokn3-3.23-1.37 [ 31s] [116/119] installing glib2-tools-2.44.1-1.1 [ 31s] [117/119] installing rpm-4.11.0.1-1.14 [ 31s] [118/119] installing glib2-devel-2.44.1-1.1 [ 31s] [119/119] installing rpm-build-4.11.0.1-1.14 [ 31s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 31s] now finalizing build dir... [ 32s] build target is armv7l-tizen-linux [ 32s] ----------------------------------------------------------------- [ 32s] I have the following modifications for libslp-db-util.spec: [ 32s] 4c4 [ 32s] < Release: 5 [ 32s] --- [ 32s] > Release: 1.1 [ 32s] 62a63 [ 32s] > %changelog [ 32s] ----------------------------------------------------------------- [ 32s] ----- building libslp-db-util.spec (user abuild) [ 32s] ----------------------------------------------------------------- [ 32s] ----------------------------------------------------------------- [ 32s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/80672087d9fb182ace961c6af842f255-libslp-db-util' -ba /home/abuild/rpmbuild/SOURCES/libslp-db-util.spec [ 32s] Building target platforms: armv7l-tizen-linux [ 32s] Building for target armv7l-tizen-linux [ 32s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jSVg2w [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + rm -rf libslp-db-util-0.1.1 [ 32s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libslp-db-util-0.1.1.tar.gz [ 32s] + /bin/tar -xf - [ 32s] + STATUS=0 [ 32s] + '[' 0 -ne 0 ']' [ 32s] + cd libslp-db-util-0.1.1 [ 32s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 32s] + cp /home/abuild/rpmbuild/SOURCES/libslp-db-util.manifest /home/abuild/rpmbuild/SOURCES/libslp-db-util-devel.manifest . [ 32s] + exit 0 [ 32s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AjgZ1h [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd libslp-db-util-0.1.1 [ 32s] ++ uname -m [ 32s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 32s] + export CFLAGS [ 32s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 32s] + export CXXFLAGS [ 32s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 32s] + export FFLAGS [ 32s] + LDFLAGS= [ 32s] + export LDFLAGS [ 32s] + LD_AS_NEEDED=1 [ 32s] + export LD_AS_NEEDED [ 32s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 32s] + export CFLAGS [ 32s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 32s] + export CXXFLAGS [ 32s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 32s] + export FFLAGS [ 32s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 32s] -- The C compiler identification is GNU 4.9.2 [ 32s] -- The CXX compiler identification is GNU 4.9.2 [ 32s] -- Check for working C compiler: /bin/cc [ 32s] -- Check for working C compiler: /bin/cc -- works [ 32s] -- Detecting C compiler ABI info [ 32s] -- Detecting C compiler ABI info - done [ 32s] -- Check for working CXX compiler: /bin/c++ [ 32s] -- Check for working CXX compiler: /bin/c++ -- works [ 32s] -- Detecting CXX compiler ABI info [ 32s] -- Detecting CXX compiler ABI info - done [ 33s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 33s] -- checking for modules 'sqlite3;dlog;glib-2.0;icu-i18n' [ 33s] -- found sqlite3, version 3.8.10.2 [ 33s] -- found dlog, version 1.0 [ 33s] -- found glib-2.0, version 2.44.1 [ 33s] -- found icu-i18n, version 57.1 [ 34s] -- Configuring done [ 34s] -- Generating done [ 34s] CMake Warning: [ 34s] Manually-specified variables were not used by the project: [ 34s] [ 34s] CMAKE_INSTALL_LIBDIR [ 34s] INCLUDE_INSTALL_DIR [ 34s] SHARE_INSTALL_PREFIX [ 34s] SYSCONF_INSTALL_DIR [ 34s] [ 34s] [ 34s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 [ 34s] + make -j4 [ 34s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 -B/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 34s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/progress.marks [ 34s] make -f CMakeFiles/Makefile2 all [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/depend [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] cd /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/SLP-db-util.dir/DependInfo.cmake --color= [ 34s] Scanning dependencies of target SLP-db-util [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/build [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 1 [ 34s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 2 [ 34s] [ 50%] [100%] Building C object CMakeFiles/SLP-db-util.dir/util_func.c.o [ 34s] /bin/cc -DDB_UTIL_ENABLE_TRACE -DDB_UTIL_USING_PLATFORM_DBG -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DSLP_db_util_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -ldl -g -fPIC -I/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/include -o CMakeFiles/SLP-db-util.dir/util_func.c.o -c /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/util_func.c [ 34s] Building C object CMakeFiles/SLP-db-util.dir/collation.c.o [ 34s] /bin/cc -DDB_UTIL_ENABLE_TRACE -DDB_UTIL_USING_PLATFORM_DBG -DFACTORYFS=\"\" -DPREFIX=\"/usr\" -DSLP_db_util_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -ldl -g -fPIC -I/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/include -o CMakeFiles/SLP-db-util.dir/collation.c.o -c /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/collation.c [ 34s] /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/util_func.c: In function '__db_util_busyhandler': [ 34s] /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/util_func.c:37:3: warning: implicit declaration of function 'nanosleep' [-Wimplicit-function-declaration] [ 34s] nanosleep(&time, NULL); [ 34s] ^ [ 34s] Linking C shared library libSLP-db-util.so [ 34s] /usr/bin/cmake -E cmake_link_script CMakeFiles/SLP-db-util.dir/link.txt --verbose=1 [ 34s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fvisibility=hidden -ldl -g -shared -Wl,-soname,libSLP-db-util.so.0 -o libSLP-db-util.so.0.1.0 CMakeFiles/SLP-db-util.dir/util_func.c.o CMakeFiles/SLP-db-util.dir/collation.c.o -lsqlite3 -ldlog -lglib-2.0 -licui18n -licuuc -licudata -ldl [ 34s] /usr/bin/cmake -E cmake_symlink_library libSLP-db-util.so.0.1.0 libSLP-db-util.so.0 libSLP-db-util.so [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 1 2 [ 34s] [100%] Built target SLP-db-util [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 0 [ 34s] + exit 0 [ 34s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.cqCyu8 [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd libslp-db-util-0.1.1 [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm [ 34s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm install [ 34s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 -B/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 34s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/progress.marks [ 34s] /bin/make -f CMakeFiles/Makefile2 all [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /bin/make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/depend [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] cd /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles/SLP-db-util.dir/DependInfo.cmake --color= [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /bin/make -f CMakeFiles/SLP-db-util.dir/build.make CMakeFiles/SLP-db-util.dir/build [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] make[2]: Nothing to be done for 'CMakeFiles/SLP-db-util.dir/build'. [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 1 2 [ 34s] [100%] Built target SLP-db-util [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1/CMakeFiles 0 [ 34s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] make[1]: Nothing to be done for 'preinstall'. [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1' [ 34s] Install the project... [ 34s] /usr/bin/cmake -P cmake_install.cmake [ 34s] -- Install configuration: "" [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/lib/libSLP-db-util.so.0.1.0 [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/lib/libSLP-db-util.so.0 [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/lib/libSLP-db-util.so [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/lib/pkgconfig/db-util.pc [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/include/db-util/db-util.h [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/include/db-util/db-util-common.h [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/include/db-util/util-func.h [ 34s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/include/db-util/collation.h [ 34s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/share/info/dir [ 34s] + find /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm -regex '.*\.la$' [ 34s] + xargs rm -f -- [ 34s] + find /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm -regex '.*\.a$' [ 34s] + xargs rm -f -- [ 34s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/libslp-db-util-0.1.1 [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/lib/libSLP-db-util.so.0.1.0 [ 34s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 34s] 48 blocks [ 34s] + /usr/lib/rpm/check-buildroot [ 34s] + /usr/lib/rpm//brp-compress [ 34s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 34s] + /usr/lib/rpm/brp-python-hardlink [ 34s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm [ 34s] Processing files: libslp-db-util-0.1.1-1.1.armv7l [ 34s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 34s] bWFpbiBuYW1lPSJfIiAvPgogICAgICAgIDwvcmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 34s] [ 34s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Qnhj7Z [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd libslp-db-util-0.1.1 [ 34s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/share/licenses/libslp-db-util [ 34s] + export LICENSEDIR [ 34s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/share/licenses/libslp-db-util [ 34s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm/usr/share/licenses/libslp-db-util [ 34s] + exit 0 [ 34s] Provides: libSLP-db-util.so.0 libslp-db-util = 0.1.1-1.1 libslp-db-util(armv7l-32) = 0.1.1-1.1 [ 34s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Requires(post): /sbin/ldconfig [ 34s] Requires(postun): /sbin/ldconfig [ 34s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libdl.so.2(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libsqlite3.so.0 rtld(GNU_HASH) [ 34s] Processing files: libslp-db-util-debugsource-0.1.1-1.1.armv7l [ 34s] Provides: libslp-db-util-debugsource = 0.1.1-1.1 libslp-db-util-debugsource(armv7l-32) = 0.1.1-1.1 [ 34s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 34s] Processing files: libslp-db-util-devel-0.1.1-1.1.armv7l [ 34s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 34s] bWFpbiBuYW1lPSJfIiAvPgogICAgICAgIDwvcmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 34s] [ 34s] Provides: libslp-db-util-devel = 0.1.1-1.1 libslp-db-util-devel(armv7l-32) = 0.1.1-1.1 pkgconfig(db-util) = 0.1.0 [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Requires: /usr/bin/pkg-config libSLP-db-util.so.0 pkgconfig(dlog) pkgconfig(glib-2.0) pkgconfig(icu-i18n) pkgconfig(sqlite3) [ 34s] Processing files: libslp-db-util-debuginfo-0.1.1-1.1.armv7l [ 34s] Provides: libslp-db-util-debuginfo = 0.1.1-1.1 libslp-db-util-debuginfo(armv7l-32) = 0.1.1-1.1 [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm [ 34s] warning: Could not canonicalize hostname: obsnw17 [ 34s] Wrote: /home/abuild/rpmbuild/SRPMS/libslp-db-util-0.1.1-1.1.src.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-db-util-0.1.1-1.1.armv7l.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-db-util-debugsource-0.1.1-1.1.armv7l.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-db-util-devel-0.1.1-1.1.armv7l.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libslp-db-util-debuginfo-0.1.1-1.1.armv7l.rpm [ 35s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Cei9ci [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd libslp-db-util-0.1.1 [ 35s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libslp-db-util-0.1.1-1.1.arm [ 35s] + exit 0 [ 35s] ... checking for files with abuild user/group [ 35s] ... creating baselibs [ 35s] [ 35s] obsnw17 finished "build libslp-db-util.spec" at Sat Apr 22 21:21:25 UTC 2017. [ 35s] Retried build at Fri May 26 12:17:23 2017 returned same result, skipped Retried build at Wed May 31 23:18:40 2017 returned same result, skipped Retried build at Thu Jun 8 07:15:09 2017 returned same result, skipped Retried build at Fri Jun 9 09:15:46 2017 returned same result, skipped Retried build at Wed Jun 14 05:19:02 2017 returned same result, skipped Retried build at Wed Jun 14 22:41:37 2017 returned same result, skipped Retried build at Mon Jun 19 08:02:47 2017 returned same result, skipped Retried build at Tue Jun 20 10:24:01 2017 returned same result, skipped Retried build at Wed Jul 5 23:08:35 2017 returned same result, skipped Retried build at Fri Jul 14 06:04:16 2017 returned same result, skipped Retried build at Tue Aug 8 07:05:43 2017 returned same result, skipped Retried build at Thu Oct 19 10:40:44 2017 returned same result, skipped Retried build at Wed Nov 8 02:59:30 2017 returned same result, skipped