[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_6 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw12 started "build _service:gbs:tizen-debug.spec" at Wed Nov 8 01:19:51 UTC 2017. [ 0s] [ 0s] Building tizen-debug for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 'ed55d7590f2f72143084e39f9dcea12c' [ 0s] [ 0s] processing recipe /var/cache/build/root_6/.build-srcdir/_service:gbs:tizen-debug.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_6/.build-srcdir/_service:gbs:tizen-debug.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_6/.build.rpmlist /var/cache/build/root_6/.build-srcdir/_service:gbs:tizen-debug.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/6/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 4s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling tar... [ 5s] [35/40] preinstalling libmount... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 6s] reordering...cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 6s] [1/90] installing glibc-debuginfo-2.20-3.2 [ 7s] [2/90] installing libmagic-data-5.28-2.16 [ 7s] [3/90] installing setup-0.9-2.4 [ 7s] [4/90] installing terminfo-base-5.9-1.35 [ 7s] [5/90] installing filesystem-3.1-1.2 [ 7s] [6/90] installing glibc-2.20-3.2 [ 7s] [7/90] installing libatomic-4.9.2-1.14 [ 7s] [8/90] installing libgcc-4.9.2-1.14 [ 7s] [9/90] installing libgomp-4.9.2-1.14 [ 7s] [10/90] installing bash-3.2.57-2.1 [ 7s] [11/90] installing cpio-2.11-1.3 [ 7s] [12/90] installing diffutils-3.3-1.3 [ 7s] [13/90] installing findutils-4.3.8-1.36 [ 7s] [14/90] installing hostname-3.12-1.3 [ 7s] [15/90] installing libattr-2.4.47-1.35 [ 7s] [16/90] installing libbz2-1.0.6-1.57 [ 7s] [17/90] installing libcap-2.24-1.35 [ 7s] [18/90] installing libelf-0.153-1.35 [ 7s] [19/90] installing libext2fs-1.42.13-1.3 [ 7s] [20/90] installing libfreebl3-3.23-1.51 [ 7s] [21/90] installing libitm-4.9.2-1.14 [ 7s] [22/90] installing libltdl-2.4.2-1.39 [ 8s] [23/90] installing liblua-5.1.4-1.11 [ 8s] [24/90] installing liblzma-5.2.2-1.29 [ 8s] [25/90] installing libpcre-8.39-2.2 [ 8s] [26/90] installing libpopt-1.16-1.11 [ 8s] [27/90] installing libsmack-1.3.0-2.14 [ 8s] [28/90] installing libsmartcols-2.28-2.1 [ 8s] [29/90] installing libsqlite-3.8.10.2-2.1 [ 8s] [30/90] installing libstdc++-4.9.2-1.14 [ 8s] [31/90] installing libuuid-2.28-2.1 [ 8s] [32/90] installing m4-1.4.17-1.3 [ 8s] [33/90] installing net-tools-2.0_20121208git-1.3 [ 8s] [34/90] installing nspr-4.12-1.16 [ 8s] [35/90] installing patch-2.7-1.11 [ 8s] [36/90] installing pkg-config-0.28-1.38 [ 8s] [37/90] installing sed-4.1c-1.3 [ 8s] [38/90] installing update-alternatives-1.16.3-1.3 [ 8s] [39/90] installing which-2.20-1.3 [ 8s] [40/90] installing zlib-1.2.8-1.39 [ 8s] [41/90] installing libncurses-5.9-1.35 [ 8s] [42/90] installing build-compare-2015.04.28-1.29 [ 8s] [43/90] installing libstdc++-devel-4.9.2-1.14 [ 9s] [44/90] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 10s] [45/90] installing cpp-4.9.2-1.14 [ 10s] [46/90] installing gcc-c++-4.9.2-1.14 [ 11s] [47/90] installing binutils-2.25-1.11 [ 11s] [48/90] installing coreutils-6.9-1.3 [ 11s] [49/90] installing db4-4.8.30.NC-1.42 [ 11s] [50/90] installing gawk-3.1.5-1.3 [ 11s] [51/90] installing grep-2.5.2-1.3 [ 11s] [52/90] installing less-466-1.3 [ 11s] [53/90] installing libacl-2.2.52-1.36 [ 11s] [54/90] installing libasm-0.153-1.35 [ 11s] [55/90] installing libblkid-2.28-2.1 [ 11s] [56/90] installing libreadline-5.2-1.34 [ 11s] [57/90] installing libubsan-4.9.2-1.14 [ 11s] [58/90] installing make-4.0-1.11 [ 11s] [59/90] installing nss-certs-3.23-1.51 [ 11s] [60/90] installing smack-1.3.0-2.14 [ 11s] [61/90] installing bzip2-1.0.6-1.57 [ 12s] [62/90] installing libmagic-5.28-2.16 [ 12s] [63/90] installing libxml2-2.9.4-2.31 [ 12s] [64/90] installing xz-5.2.2-1.29 [ 12s] [65/90] installing libdw-0.153-1.35 [ 12s] [66/90] installing linux-glibc-devel-3.10-1.40 [ 12s] [67/90] installing file-5.28-2.16 [ 12s] [68/90] installing glibc-locale-2.20-3.2 [ 12s] [69/90] installing tar-1.17-1.3 [ 12s] [70/90] installing gzip-1.3.12-1.35 [ 12s] [71/90] installing libfdisk1-2.28-2.1 [ 12s] [72/90] installing libmount-2.28-2.1 [ 13s] [73/90] installing pam-1.1.6-1.2 [ 13s] [74/90] installing perl-5.20.0-1.39 [ 14s] [75/90] installing tzdata-2016i-2.3 [ 14s] [76/90] installing elfutils-0.153-1.35 [ 14s] [77/90] installing gcc-4.9.2-1.14 [ 14s] [78/90] installing build-mkbaselibs-20120927-1.3 [ 14s] [79/90] installing glibc-devel-2.20-3.2 [ 15s] [80/90] installing qemu-accel-x86_64-armv7l-0.4-1.9 [ 19s] [81/90] installing autoconf-2.69-1.42 [ 19s] [82/90] installing util-linux-2.28-2.1 [ 19s] [83/90] installing automake-1.14.1-1.37 [ 19s] [84/90] installing util-linux-su-2.28-2.1 [ 19s] [85/90] installing build-20120927-1.3 [ 19s] [86/90] installing libtool-2.4.2-1.39 [ 19s] [87/90] installing nss-3.23-1.51 [ 19s] [88/90] installing libsoftokn3-3.23-1.51 [ 19s] [89/90] installing rpm-4.11.0.1-2.11 [ 19s] [90/90] installing rpm-build-4.11.0.1-2.11 [ 19s] removing nis flags from /var/cache/build/root_6/etc/nsswitch.conf... [ 19s] now finalizing build dir... [ 20s] build target is armv7l-tizen-linux [ 20s] ----------------------------------------------------------------- [ 20s] I have the following modifications for tizen-debug.spec: [ 20s] 8c8 [ 20s] < Release: 2 [ 20s] --- [ 20s] > Release: 1.3 [ 20s] ----------------------------------------------------------------- [ 20s] ----- building tizen-debug.spec (user abuild) [ 20s] ----------------------------------------------------------------- [ 20s] ----------------------------------------------------------------- [ 20s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/ed55d7590f2f72143084e39f9dcea12c-tizen-debug' -ba /home/abuild/rpmbuild/SOURCES/tizen-debug.spec [ 20s] Building target platforms: armv7l-tizen-linux [ 20s] Building for target armv7l-tizen-linux [ 20s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.xfQG0G [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + rm -rf tizen-debug-2.20 [ 20s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/tizen-debug-2.20.tar.gz [ 20s] + /bin/tar -xf - [ 20s] + STATUS=0 [ 20s] + '[' 0 -ne 0 ']' [ 20s] + cd tizen-debug-2.20 [ 20s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 20s] + exit 0 [ 20s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vuLVcv [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd tizen-debug-2.20 [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm [ 20s] ++++ readelf --program-headers /usr/bin/cp [ 20s] ++++ sed -ne '/program interpreter/s|.*: \(.*\)\]|\1|p' [ 20s] +++ readlink -f /lib/ld-linux.so.3 [ 20s] ++ basename /usr/lib/ld-2.20-2014.11.so [ 20s] + LD_SO=ld-2.20-2014.11.so [ 20s] ++ echo ld-2.20-2014.11.so [ 20s] ++ sed -e 's/ld-\(.*\).so/\1/' [ 20s] + GLIBC_VERSION=2.20-2014.11 [ 20s] + LIBC_SO=libc-2.20-2014.11.so [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm//usr/lib/debug//lib [ 20s] + objcopy -j .note.gnu.build-id -j .debug_frame /usr/lib/debug//lib/libc-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/libc-2.20-2014.11.so.debug [ 20s] BFD: /usr/lib/debug//lib/libc-2.20-2014.11.so.debug: warning: Empty loadable segment detected, is this intentional ? [ 20s] [ 20s] + cp /usr/lib/debug//lib/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/ld-2.20-2014.11.so.debug [ 20s] + chmod 444 /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/libc-2.20-2014.11.so.debug [ 20s] + for file in '/home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/${LD_SO}.debug' '/home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/${LIBC_SO}.debug' [ 20s] ++ readelf -n /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/ld-2.20-2014.11.so.debug [ 20s] ++ grep 'Build ID' [ 20s] ++ awk '{print $3}' [ 20s] + BuildID=78e09d56688e2024298f871ba5e6b8db49d652d3 [ 20s] ++ echo 78e09d56688e2024298f871ba5e6b8db49d652d3 [ 20s] ++ cut -b-2 [ 20s] + Dir=78 [ 20s] ++ echo 78e09d56688e2024298f871ba5e6b8db49d652d3 [ 20s] ++ cut -b3- [ 20s] + File=e09d56688e2024298f871ba5e6b8db49d652d3 [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//.build-id/78 [ 20s] + cp -d /usr/lib/debug//.build-id/78/e09d56688e2024298f871ba5e6b8db49d652d3.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//.build-id/78 [ 20s] + for file in '/home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/${LD_SO}.debug' '/home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/${LIBC_SO}.debug' [ 20s] ++ readelf -n /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//lib/libc-2.20-2014.11.so.debug [ 20s] ++ grep 'Build ID' [ 20s] ++ awk '{print $3}' [ 20s] readelf: Error: no .dynamic section in the dynamic segment [ 20s] + BuildID=9e33f4bdfe1b7ba8aafdc2c9d87c474ee9750103 [ 20s] ++ echo 9e33f4bdfe1b7ba8aafdc2c9d87c474ee9750103 [ 20s] ++ cut -b-2 [ 20s] + Dir=9e [ 20s] ++ echo 9e33f4bdfe1b7ba8aafdc2c9d87c474ee9750103 [ 20s] ++ cut -b3- [ 20s] + File=33f4bdfe1b7ba8aafdc2c9d87c474ee9750103 [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//.build-id/9e [ 20s] + cp -d /usr/lib/debug//.build-id/9e/33f4bdfe1b7ba8aafdc2c9d87c474ee9750103.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/lib/debug//.build-id/9e [ 20s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/tizen-debug-2.20 [ 20s] + /usr/lib/rpm/check-buildroot [ 20s] + /usr/lib/rpm//brp-compress [ 20s] + /usr/lib/rpm/brp-strip-static-archive /bin/true [ 20s] + /usr/lib/rpm/brp-python-hardlink [ 20s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm [ 20s] Processing files: tizen-debug-2.20-1.3.armv7l [ 20s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 20s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 20s] [ 20s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.w28Kek [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd tizen-debug-2.20 [ 20s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/share/licenses/tizen-debug [ 20s] + export LICENSEDIR [ 20s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/share/licenses/tizen-debug [ 20s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/share/licenses/tizen-debug [ 20s] + cp -pr COPYING.LIB /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm/usr/share/licenses/tizen-debug [ 20s] + exit 0 [ 20s] Provides: tizen-debug = 2.20-1.3 tizen-debug(armv7l-32) = 2.20-1.3 [ 20s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 20s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm [ 21s] warning: Could not canonicalize hostname: obsnw12 [ 21s] Wrote: /home/abuild/rpmbuild/SRPMS/tizen-debug-2.20-1.3.src.rpm [ 21s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/tizen-debug-2.20-1.3.armv7l.rpm [ 21s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.4KnuBP [ 21s] + umask 022 [ 21s] + cd /home/abuild/rpmbuild/BUILD [ 21s] + cd tizen-debug-2.20 [ 21s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.3.arm [ 21s] + exit 0 [ 21s] ... checking for files with abuild user/group [ 21s] ... creating baselibs [ 21s] ... comparing built packages with the former built [ 21s] /usr/lib/build/pkg-diff.sh [ 21s] compare /.build.oldpackages/tizen-debug-2.20-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/tizen-debug-2.20-1.3.src.rpm [ 22s] This is not a prerelease project. Compare the project name. [ 22s] comparing rpmtags [ 22s] comparing RELEASE [ 22s] comparing PROVIDES [ 22s] comparing scripts [ 22s] comparing filelist [ 22s] comparing file checksum [ 22s] RPM meta information is identical [ 22s] compare /.build.oldpackages/tizen-debug-2.20-1.2.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/tizen-debug-2.20-1.3.armv7l.rpm [ 22s] Comparing tizen-debug-2.20-1.2.armv7l.rpm to tizen-debug-2.20-1.3.armv7l.rpm [ 22s] This is not a prerelease project. Compare the project name. [ 22s] comparing rpmtags [ 22s] comparing RELEASE [ 22s] comparing PROVIDES [ 22s] comparing scripts [ 22s] comparing filelist [ 22s] --- /tmp/tmp.JSrRz42609/tmp.TfExG42691 2017-11-08 01:20:13.570286023 +0000 [ 22s] +++ /tmp/tmp.JSrRz42609/tmp.vyAhm42695 2017-11-08 01:20:13.578285946 +0000 [ 22s] @@ -1,7 +1,7 @@ [ 22s] -/usr/lib/debug/.build-id/8d 0 (none) 40755 root root 0 4294967295 [ 22s] -/usr/lib/debug/.build-id/8d/96bd9b26f72c9fc65e595b9e065f91698c046b.debug 0 (none) 120777 root root 0 4294967295 ../../lib/ld-2.20-2014.11.so.debug [ 22s] -/usr/lib/debug/.build-id/d7 0 (none) 40755 root root 0 4294967295 [ 22s] -/usr/lib/debug/.build-id/d7/8b30b5bad2c873647fe10409ce78f824f46792.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libc-2.20-2014.11.so.debug [ 22s] +/usr/lib/debug/.build-id/78 0 (none) 40755 root root 0 4294967295 [ 22s] +/usr/lib/debug/.build-id/78/e09d56688e2024298f871ba5e6b8db49d652d3.debug 0 (none) 120777 root root 0 4294967295 ../../lib/ld-2.20-2014.11.so.debug [ 22s] +/usr/lib/debug/.build-id/9e 0 (none) 40755 root root 0 4294967295 [ 22s] +/usr/lib/debug/.build-id/9e/33f4bdfe1b7ba8aafdc2c9d87c474ee9750103.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libc-2.20-2014.11.so.debug [ 22s] /usr/lib/debug/lib/ld-2.20-2014.11.so.debug 0 (none) 100444 root root 0 4294967295 [ 22s] /usr/lib/debug/lib/libc-2.20-2014.11.so.debug 0 (none) 100444 root root 0 4294967295 [ 22s] /usr/share/licenses/tizen-debug 0 (none) 40755 root root 0 4294967295 [ 22s] RPM meta information is different [ 22s] [ 22s] obsnw12 finished "build tizen-debug.spec" at Wed Nov 8 01:20:13 UTC 2017. [ 22s] Retried build at Wed Nov 8 02:51:46 2017 returned same result, skipped