[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw20 started "build _service:gbs:xmlsec1.spec" at Sat Apr 22 21:04:25 UTC 2017. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '5301105397518f74881902299ce4f92f' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:xmlsec1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 6s] reordering...cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 6s] [1/107] installing libmagic-data-5.28-1.19 [ 7s] [2/107] installing setup-0.9-1.8 [ 7s] [3/107] installing terminfo-base-5.9-1.21 [ 7s] [4/107] installing filesystem-3.1-1.2 [ 7s] [5/107] installing glibc-2.20-1.2 [ 7s] [6/107] installing libatomic-4.9.2-1.6 [ 7s] [7/107] installing libgcc-4.9.2-1.6 [ 7s] [8/107] installing libgomp-4.9.2-1.6 [ 7s] [9/107] installing bash-3.2.57-2.1 [ 7s] [10/107] installing cpio-2.11-1.3 [ 7s] [11/107] installing diffutils-3.3-1.3 [ 7s] [12/107] installing fdupes-1.40-1.23 [ 7s] [13/107] installing findutils-4.3.8-1.22 [ 7s] [14/107] installing hostname-3.12-1.3 [ 7s] [15/107] installing libattr-2.4.47-1.21 [ 7s] [16/107] installing libbz2-1.0.6-1.43 [ 7s] [17/107] installing libcap-2.24-1.21 [ 7s] [18/107] installing libelf-0.153-1.25 [ 7s] [19/107] installing libext2fs-1.42.13-1.2 [ 7s] [20/107] installing libfreebl3-3.23-1.37 [ 8s] [21/107] installing libgpg-error-1.13-1.29 [ 8s] [22/107] installing libitm-4.9.2-1.6 [ 8s] [23/107] installing libltdl-2.4.2-1.25 [ 8s] [24/107] installing liblua-5.1.4-1.5 [ 8s] [25/107] installing liblzma-5.2.2-1.19 [ 8s] [26/107] installing libpcre-8.39-1.3 [ 8s] [27/107] installing libpopt-1.16-1.5 [ 8s] [28/107] installing libsmack-1.3.0-1.20 [ 8s] [29/107] installing libsmartcols-2.28-1.3 [ 8s] [30/107] installing libsqlite-3.8.10.2-1.5 [ 8s] [31/107] installing libstdc++-4.9.2-1.6 [ 8s] [32/107] installing libuuid-2.28-1.3 [ 8s] [33/107] installing m4-1.4.17-1.3 [ 8s] [34/107] installing net-tools-2.0_20121208git-1.3 [ 8s] [35/107] installing nspr-4.12-1.10 [ 8s] [36/107] installing patch-2.7-1.5 [ 8s] [37/107] installing pkg-config-0.28-1.24 [ 8s] [38/107] installing sed-4.1c-1.3 [ 8s] [39/107] installing update-alternatives-1.16.3-1.3 [ 8s] [40/107] installing which-2.20-1.3 [ 9s] [41/107] installing zlib-1.2.8-1.25 [ 9s] [42/107] installing libncurses-5.9-1.21 [ 9s] [43/107] installing libncurses6-5.9-1.21 [ 9s] [44/107] installing build-compare-2015.04.28-1.16 [ 9s] [45/107] installing libstdc++-devel-4.9.2-1.6 [ 9s] [46/107] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 10s] [47/107] installing cpp-4.9.2-1.6 [ 11s] [48/107] installing gcc-c++-4.9.2-1.6 [ 11s] [49/107] installing xz-devel-5.2.2-1.19 [ 11s] [50/107] installing binutils-2.25-1.11 [ 11s] [51/107] installing coreutils-6.9-1.3 [ 12s] [52/107] installing db4-4.8.30.NC-1.28 [ 12s] [53/107] installing gawk-3.1.5-1.3 [ 12s] [54/107] installing grep-2.5.2-1.3 [ 12s] [55/107] installing less-466-1.3 [ 12s] [56/107] installing libacl-2.2.52-1.22 [ 12s] [57/107] installing libasm-0.153-1.25 [ 12s] [58/107] installing libblkid-2.28-1.3 [ 12s] [59/107] installing libgcrypt-1.7.1-1.3 [ 12s] [60/107] installing libopenssl-1.0.2j-1.22 [ 12s] [61/107] installing libreadline-5.2-1.20 [ 12s] [62/107] installing libubsan-4.9.2-1.6 [ 12s] [63/107] installing make-4.0-1.5 [ 12s] [64/107] installing nss-certs-3.23-1.37 [ 12s] [65/107] installing smack-1.3.0-1.20 [ 12s] [66/107] installing bzip2-1.0.6-1.43 [ 12s] [67/107] installing libmagic-5.28-1.19 [ 12s] [68/107] installing libxml2-2.9.4-2.17 [ 12s] [69/107] installing xz-5.2.2-1.19 [ 13s] [70/107] installing libdw-0.153-1.25 [ 13s] [71/107] installing ncurses-devel-5.9-1.21 [ 13s] [72/107] installing linux-glibc-devel-3.10-1.26 [ 13s] [73/107] installing readline-devel-5.2-1.20 [ 13s] [74/107] installing file-5.28-1.19 [ 13s] [75/107] installing glibc-locale-2.20-1.2 [ 13s] [76/107] installing libmount-2.28-1.3 [ 13s] [77/107] installing openssl-1.0.2j-1.22 [ 13s] [78/107] installing tar-1.17-1.3 [ 13s] [79/107] installing gzip-1.3.12-1.21 [ 13s] [80/107] installing libfdisk1-2.28-1.3 [ 13s] [81/107] installing libxml2-tools-2.9.4-2.17 [ 14s] [82/107] installing pam-1.1.6-1.2 [ 14s] [83/107] installing perl-5.20.0-1.27 [ 15s] [84/107] installing tzdata-2016i-1.1 [ 15s] [85/107] installing elfutils-0.153-1.25 [ 15s] [86/107] installing gcc-4.9.2-1.6 [ 16s] [87/107] installing libxslt-1.1.29-1.3 [ 16s] [88/107] installing build-mkbaselibs-20120927-1.3 [ 16s] [89/107] installing glibc-devel-2.20-1.2 [ 16s] [90/107] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 20s] [91/107] installing autoconf-2.69-1.28 [ 20s] [92/107] installing libxslt-tools-1.1.29-1.3 [ 20s] [93/107] installing util-linux-2.28-1.3 [ 20s] [94/107] installing zlib-devel-1.2.8-1.25 [ 20s] [95/107] installing automake-1.14.1-1.23 [ 20s] [96/107] installing util-linux-su-2.28-1.3 [ 20s] [97/107] installing build-20120927-1.3 [ 21s] [98/107] installing libgpg-error-devel-1.13-1.29 [ 21s] [99/107] installing libopenssl-devel-1.0.2j-1.22 [ 21s] [100/107] installing libtool-2.4.2-1.25 [ 21s] [101/107] installing libgcrypt-devel-1.7.1-1.3 [ 21s] [102/107] installing libxml2-devel-2.9.4-2.17 [ 21s] [103/107] installing libxslt-devel-1.1.29-1.3 [ 21s] [104/107] installing nss-3.23-1.37 [ 21s] [105/107] installing libsoftokn3-3.23-1.37 [ 21s] [106/107] installing rpm-4.11.0.1-1.14 [ 21s] [107/107] installing rpm-build-4.11.0.1-1.14 [ 21s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 21s] now finalizing build dir... [ 22s] build target is armv7l-tizen-linux [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for xmlsec1.spec: [ 22s] 5c5 [ 22s] < Release: 0 [ 22s] --- [ 22s] > Release: 1.1 [ 22s] 163a164 [ 22s] > %changelog [ 22s] ----------------------------------------------------------------- [ 22s] ----- building xmlsec1.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/5301105397518f74881902299ce4f92f-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 22s] Building target platforms: armv7l-tizen-linux [ 22s] Building for target armv7l-tizen-linux [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.wJZFkw [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf xmlsec1-1.2.22 [ 22s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.22.tar.gz [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd xmlsec1-1.2.22 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + echo 'Patch #0 (d4d3535-to-1ca1a13.diff):' [ 22s] Patch #0 (d4d3535-to-1ca1a13.diff): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/d4d3535-to-1ca1a13.diff [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file include/xmlsec/keyinfo.h [ 22s] patching file include/xmlsec/xmldsig.h [ 22s] patching file src/errors.c [ 22s] patching file src/io.c [ 22s] patching file src/openssl/digests.c [ 22s] patching file src/openssl/x509vfy.c [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch):' [ 22s] Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file include/xmlsec/keyinfo.h [ 22s] patching file include/xmlsec/xmldsig.h [ 22s] patching file src/errors.c [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #2 (0003-Add-gitignore-file.patch):' [ 22s] Patch #2 (0003-Add-gitignore-file.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-gitignore-file.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file .gitignore [ 22s] + echo 'Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch):' [ 22s] Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-Replace-vulnerable-function-to-thread-safety.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/errors.c [ 22s] patching file src/io.c [ 22s] patching file src/openssl/app.c [ 22s] patching file src/templates.c [ 22s] patching file src/transforms.c [ 22s] patching file src/xmldsig.c [ 22s] patching file src/xmltree.c [ 22s] patching file src/xpath.c [ 22s] + echo 'Patch #4 (0005-Fix-svace-defects.patch):' [ 22s] Patch #4 (0005-Fix-svace-defects.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-Fix-svace-defects.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/bn.c [ 22s] patching file src/templates.c [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #5 (0006-Refine-legacy-code-about-error-handling.patch):' [ 22s] Patch #5 (0006-Refine-legacy-code-about-error-handling.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-Refine-legacy-code-about-error-handling.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/errors.c [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #6 (0007-Fix-svace-defect.patch):' [ 22s] Patch #6 (0007-Fix-svace-defect.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-Fix-svace-defect.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch):' [ 22s] Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file include/xmlsec/xmldsig.h [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch):' [ 22s] Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-Add-NULL-check-logic-on-custum-code.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/xmldsig.c [ 22s] + echo 'Patch #9 (0010-Add-default-section-to-switch-for-error-handling.patch):' [ 22s] Patch #9 (0010-Add-default-section-to-switch-for-error-handling.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-Add-default-section-to-switch-for-error-handling.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/xpath.c [ 22s] + echo 'Patch #10 (0011-Fix-memory-leak-on-upstream-code.patch):' [ 22s] Patch #10 (0011-Fix-memory-leak-on-upstream-code.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-Fix-memory-leak-on-upstream-code.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/relationship.c [ 22s] + echo 'Patch #11 (0012-Fix-memory-leak-on-custom-code.patch):' [ 22s] Patch #11 (0012-Fix-memory-leak-on-custom-code.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0012-Fix-memory-leak-on-custom-code.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/xmldsig.c [ 22s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 22s] + exit 0 [ 22s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.yMRbai [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd xmlsec1-1.2.22 [ 22s] ++ uname -m [ 22s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 22s] + LANG=C [ 22s] + export LANG [ 22s] + unset DISPLAY [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + LDFLAGS= [ 22s] + export LDFLAGS [ 22s] + LD_AS_NEEDED=1 [ 22s] + export LD_AS_NEEDED [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + autoreconf -v --install --force [ 24s] autoreconf: Entering directory `.' [ 24s] autoreconf: configure.ac: not using Gettext [ 25s] autoreconf: running: aclocal --force -I m4 [ 34s] autoreconf: configure.ac: tracing [ 35s] autoreconf: running: libtoolize --copy --force [ 35s] libtoolize: putting auxiliary files in `.'. [ 35s] libtoolize: copying file `./ltmain.sh' [ 35s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 35s] libtoolize: copying file `m4/libtool.m4' [ 35s] libtoolize: copying file `m4/ltoptions.m4' [ 35s] libtoolize: copying file `m4/ltsugar.m4' [ 35s] libtoolize: copying file `m4/ltversion.m4' [ 36s] libtoolize: copying file `m4/lt~obsolete.m4' [ 44s] autoreconf: running: /usr/bin/autoconf --force [ 48s] autoreconf: running: /usr/bin/autoheader --force [ 50s] autoreconf: running: automake --add-missing --copy --force-missing [ 62s] autoreconf: Leaving directory `.' [ 62s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 63s] configure: WARNING: unrecognized options: --enable-dynamic [ 63s] checking build system type... armv7l-tizen-linux-gnueabi [ 63s] checking host system type... armv7l-tizen-linux-gnueabi [ 63s] checking for a BSD-compatible install... /bin/install -c [ 63s] checking whether build environment is sane... yes [ 63s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 63s] checking for gawk... gawk [ 63s] checking whether make sets $(MAKE)... yes [ 63s] checking whether make supports nested variables... yes [ 63s] checking whether UID '399' is supported by ustar format... yes [ 63s] checking whether GID '399' is supported by ustar format... yes [ 63s] checking how to create a ustar tar archive... gnutar [ 63s] checking whether to enable maintainer-specific portions of Makefiles... no [ 63s] checking whether make supports nested variables... (cached) yes [ 63s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 63s] checking whether the C compiler works... yes [ 63s] checking for C compiler default output file name... a.out [ 63s] checking for suffix of executables... [ 63s] checking whether we are cross compiling... no [ 63s] checking for suffix of object files... o [ 63s] checking whether we are using the GNU C compiler... yes [ 63s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 63s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 63s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 63s] checking for style of include used by make... GNU [ 63s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 63s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 63s] checking for grep that handles long lines and -e... /bin/grep [ 63s] checking for egrep... /bin/grep -E [ 63s] checking for ANSI C header files... yes [ 63s] checking how to print strings... printf [ 63s] checking for a sed that does not truncate output... /bin/sed [ 63s] checking for fgrep... /bin/grep -F [ 63s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 63s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 63s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 63s] checking the name lister (/bin/nm -B) interface... BSD nm [ 63s] checking whether ln -s works... yes [ 63s] checking the maximum length of command line arguments... 1572864 [ 63s] checking whether the shell understands some XSI constructs... yes [ 63s] checking whether the shell understands "+="... yes [ 64s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 64s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 64s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 64s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 64s] checking for objdump... objdump [ 64s] checking how to recognize dependent libraries... pass_all [ 64s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 64s] checking for dlltool... no [ 64s] checking how to associate runtime and link libraries... printf %s\n [ 64s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 64s] checking for ar... ar [ 64s] checking for archiver @FILE support... @ [ 64s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 64s] checking for strip... strip [ 64s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 64s] checking for ranlib... ranlib [ 64s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 64s] checking for sysroot... no [ 64s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 64s] checking for mt... no [ 64s] checking if : is a manifest tool... no [ 64s] checking for sys/types.h... yes [ 64s] checking for sys/stat.h... yes [ 64s] checking for stdlib.h... yes [ 64s] checking for string.h... yes [ 64s] checking for memory.h... yes [ 64s] checking for strings.h... yes [ 64s] checking for inttypes.h... yes [ 64s] checking for stdint.h... yes [ 64s] checking for unistd.h... yes [ 64s] checking for dlfcn.h... yes [ 64s] checking for objdir... .libs [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 64s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 64s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 64s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 64s] checking whether -lc should be explicitly linked in... no [ 64s] checking dynamic linker characteristics... GNU/Linux ld.so [ 64s] checking how to hardcode library paths into programs... immediate [ 64s] checking whether stripping libraries is possible... yes [ 64s] checking if libtool supports shared libraries... yes [ 64s] checking whether to build shared libraries... yes [ 64s] checking whether to build static libraries... yes [ 64s] checking for cp... /bin/cp [ 64s] checking for mv... /bin/mv [ 64s] checking for tar... /bin/tar [ 64s] checking for perl... /bin/perl [ 64s] checking for dirent.h that defines DIR... yes [ 65s] checking for library containing opendir... none required [ 65s] checking for ANSI C header files... (cached) yes [ 65s] checking stdio.h usability... yes [ 65s] checking stdio.h presence... yes [ 65s] checking for stdio.h... yes [ 65s] checking for stdlib.h... (cached) yes [ 65s] checking for string.h... (cached) yes [ 65s] checking ctype.h usability... yes [ 65s] checking ctype.h presence... yes [ 65s] checking for ctype.h... yes [ 65s] checking errno.h usability... yes [ 65s] checking errno.h presence... yes [ 65s] checking for errno.h... yes [ 65s] checking ansidecl.h usability... no [ 65s] checking ansidecl.h presence... no [ 65s] checking for ansidecl.h... no [ 65s] checking time.h usability... yes [ 65s] checking time.h presence... yes [ 65s] checking for time.h... yes [ 65s] checking for strchr... yes [ 65s] checking for strrchr... yes [ 65s] checking for printf... yes [ 65s] checking for sprintf... yes [ 65s] checking for fprintf... yes [ 65s] checking for snprintf... yes [ 65s] checking for vfprintf... yes [ 65s] checking for vsprintf... yes [ 65s] checking for vsnprintf... yes [ 65s] checking for sscanf... yes [ 65s] checking for timegm... yes [ 65s] checking for development environment... no [ 65s] checking for man pages build... no [ 65s] checking for docs build... no [ 65s] checking for __FUNCTION__ or __func__... __func__ [ 65s] checking size of size_t... 4 [ 65s] checking for pkg-config... yes [ 65s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 65s] checking pkg-config is at least version 0.9.0... yes [ 66s] checking for LIBXML... yes [ 66s] checking for LIBXSLT... yes [ 66s] checking for OPENSSL... no [ 66s] checking for OPENSSL... yes [ 66s] checking for NSS... no [ 66s] checking for NSS... no [ 66s] checking for NSS... no [ 66s] checking for NSS... no [ 66s] checking for nspr libraries >= 4.4.1... no [ 66s] checking for nss libraries >= 3.9... no [ 66s] checking for GCRYPT... no [ 67s] checking for GCRYPT... no [ 67s] checking for GCRYPT... no [ 67s] checking for gcrypt libraries >= 1.4.0... checking for gnutls libraries >= 2.8.0... no [ 67s] checking for mscrypto libraries... none [ 67s] checking for default crypto library... yes ('openssl') [ 67s] checking for MD5 support... yes [ 67s] checking for RIPEMD-160 support... yes [ 67s] checking for SHA1 support... yes [ 67s] checking for SHA224 support... yes [ 67s] checking for SHA256 support... yes [ 67s] checking for SHA384 support... yes [ 67s] checking for SHA512 support... yes [ 67s] checking for HMAC support... yes [ 67s] checking for DSA support... yes [ 67s] checking for RSA support... yes [ 67s] checking for x509 support... yes [ 67s] checking for DES support... yes [ 67s] checking for AES support... yes [ 67s] checking for GOST support... no [ 67s] checking for EXPERMIENTAL GOST2012 support... no [ 67s] checking for XMLDSig support... yes [ 67s] checking for XMLEnc support... yes [ 67s] checking for xmlsec-crypto dynamic loading support... no [ 67s] checking for xmlsec-crypto dynamic loading support in command line tool... no [ 67s] checking for docs folder... $(datadir)/doc/xmlsec1 [ 67s] checking for Simple Keys Manager testing... yes [ 67s] checking for templates testing... yes [ 67s] checking for debugging... no [ 67s] checking for profiling... no [ 67s] checking for pedantic... no [ 67s] checking for static linking... no [ 67s] checking that generated files are newer than configure... done [ 67s] configure: creating ./config.status [ 67s] config.status: creating include/xmlsec/openssl/Makefile [ 67s] config.status: creating src/openssl/Makefile [ 67s] config.status: creating include/xmlsec/gcrypt/Makefile [ 67s] config.status: creating src/gcrypt/Makefile [ 67s] config.status: creating include/xmlsec/version.h [ 67s] config.status: creating Makefile [ 67s] config.status: creating include/Makefile [ 67s] config.status: creating include/xmlsec/Makefile [ 67s] config.status: creating include/xmlsec/private/Makefile [ 67s] config.status: creating src/Makefile [ 67s] config.status: creating apps/Makefile [ 68s] config.status: creating docs/Makefile [ 68s] config.status: creating docs/api/Makefile [ 68s] config.status: creating man/Makefile [ 68s] config.status: creating xmlsec1-openssl.pc [ 68s] config.status: creating xmlsec1-gnutls.pc [ 68s] config.status: creating xmlsec1-gcrypt.pc [ 68s] config.status: creating xmlsec1-nss.pc [ 68s] config.status: creating xmlsec1.spec [ 68s] config.status: creating xmlsec1Conf.sh [ 68s] config.status: creating xmlsec1-config [ 68s] config.status: creating config.h [ 68s] config.status: executing depfiles commands [ 69s] config.status: executing libtool commands [ 69s] configure: WARNING: unrecognized options: --enable-dynamic [ 69s] + /bin/make -j4 [ 69s] /bin/make all-recursive [ 69s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 69s] Making all in include [ 69s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 69s] Making all in xmlsec [ 69s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 69s] Making all in private [ 69s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 69s] make[4]: Nothing to be done for 'all'. [ 69s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 69s] Making all in openssl [ 69s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 69s] make[4]: Nothing to be done for 'all'. [ 69s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 69s] Making all in gcrypt [ 69s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 69s] make[4]: Nothing to be done for 'all'. [ 69s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 69s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 69s] make[4]: Nothing to be done for 'all-am'. [ 69s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 69s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 69s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 69s] make[3]: Nothing to be done for 'all-am'. [ 69s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 69s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 69s] Making all in src [ 69s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 69s] Making all in . [ 69s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 69s] CC app.lo [ 69s] CC base64.lo [ 69s] CC bn.lo [ 69s] CC buffer.lo [ 70s] CC c14n.lo [ 70s] CC dl.lo [ 70s] CC enveloped.lo [ 70s] CC errors.lo [ 70s] CC io.lo [ 70s] In file included from /usr/include/libxml2/libxml/tree.h:18:0, [ 70s] from errors.c:18: [ 70s] errors.c: In function 'xmlSecError': [ 70s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrVPrintf' differ in signedness [-Wpointer-sign] [ 70s] #define BAD_CAST (xmlChar *) [ 70s] ^ [ 70s] errors.c:234:60: note: in expansion of macro 'BAD_CAST' [ 70s] xmlSecStrVPrintf(error_msg, sizeof(error_msg), BAD_CAST msg, va); [ 70s] ^ [ 70s] /usr/include/libxml2/libxml/xmlstring.h:103:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 70s] xmlStrVPrintf (xmlChar *buf, [ 70s] ^ [ 70s] io.c: In function 'xmlSecTransformInputURIOpen': [ 70s] io.c:432:21: warning: format '%s' expects argument of type 'char *', but argument 9 has type 'int' [-Wformat=] [ 70s] strerror_r(errno, buf, sizeof(buf))); [ 70s] ^ [ 70s] io.c: In function 'xmlSecTransformInputURIPopBin': [ 70s] io.c:530:25: warning: format '%s' expects argument of type 'char *', but argument 8 has type 'int' [-Wformat=] [ 70s] "error=%s", strerror_r(errno, buf, sizeof(buf))); [ 70s] ^ [ 70s] CC keyinfo.lo [ 70s] CC keys.lo [ 71s] CC keysdata.lo [ 71s] CC keysmngr.lo [ 71s] CC kw_aes_des.lo [ 71s] CC list.lo [ 71s] CC membuf.lo [ 72s] CC nodeset.lo [ 72s] CC parser.lo [ 72s] CC relationship.lo [ 72s] CC soap.lo [ 72s] CC strings.lo [ 72s] CC templates.lo [ 72s] CC transforms.lo [ 72s] CC x509.lo [ 72s] CC xmldsig.lo [ 72s] xmldsig.c: In function 'xmlSecDecodeCmp': [ 72s] xmldsig.c:920:18: warning: comparison between pointer and integer [ 72s] while(*plain != NULL) { [ 72s] ^ [ 72s] xmldsig.c:921:21: warning: comparison between pointer and integer [ 72s] if(*encoded == NULL) [ 72s] ^ [ 72s] xmldsig.c:926:31: warning: comparison between pointer and integer [ 72s] if(*(encoded + 1) == NULL && *(encoded + 2) == NULL) [ 72s] ^ [ 72s] xmldsig.c:926:57: warning: comparison between pointer and integer [ 72s] if(*(encoded + 1) == NULL && *(encoded + 2) == NULL) [ 72s] ^ [ 73s] CC xmlenc.lo [ 73s] CC xmlsec.lo [ 73s] CC xmltree.lo [ 73s] In file included from /usr/include/libxml2/libxml/tree.h:18:0, [ 73s] from xmltree.c:19: [ 73s] xmltree.c: In function 'xmlSecGenerateID': [ 73s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 73s] #define BAD_CAST (xmlChar *) [ 73s] ^ [ 73s] xmltree.c:844:38: note: in expansion of macro 'BAD_CAST' [ 73s] xmlSecStrPrintf(tmp, tmpLen, BAD_CAST "%s%s", prefix, res); [ 73s] ^ [ 73s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 73s] xmlStrPrintf (xmlChar *buf, [ 73s] ^ [ 73s] xmltree.c: In function 'xmlSecGetQName': [ 73s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 73s] #define BAD_CAST (xmlChar *) [ 73s] ^ [ 73s] xmltree.c:1058:37: note: in expansion of macro 'BAD_CAST' [ 73s] xmlSecStrPrintf(qname, len, BAD_CAST "%s:%s", ns->prefix, local); [ 73s] ^ [ 73s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 73s] xmlStrPrintf (xmlChar *buf, [ 73s] ^ [ 73s] CC xpath.lo [ 74s] CC xslt.lo [ 74s] CCLD libxmlsec1.la [ 75s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 75s] Making all in openssl [ 75s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 75s] CC libxmlsec1_openssl_la-app.lo [ 75s] CC libxmlsec1_openssl_la-bn.lo [ 75s] CC libxmlsec1_openssl_la-ciphers.lo [ 75s] CC libxmlsec1_openssl_la-crypto.lo [ 75s] In file included from /usr/include/libxml2/libxml/tree.h:18:0, [ 75s] from app.c:15: [ 75s] app.c: In function 'xmlSecOpenSSLDefaultPasswordCallback': [ 75s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 75s] #define BAD_CAST (xmlChar *) [ 75s] ^ [ 75s] app.c:1563:53: note: in expansion of macro 'BAD_CAST' [ 75s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password for \"%s\" file: ", filename); [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 75s] xmlStrPrintf (xmlChar *buf, [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 75s] #define BAD_CAST (xmlChar *) [ 75s] ^ [ 75s] app.c:1565:53: note: in expansion of macro 'BAD_CAST' [ 75s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password: "); [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 75s] xmlStrPrintf (xmlChar *buf, [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 75s] #define BAD_CAST (xmlChar *) [ 75s] ^ [ 75s] app.c:1583:53: note: in expansion of macro 'BAD_CAST' [ 75s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password for \"%s\" file again: ", filename); [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 75s] xmlStrPrintf (xmlChar *buf, [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 75s] #define BAD_CAST (xmlChar *) [ 75s] ^ [ 75s] app.c:1585:53: note: in expansion of macro 'BAD_CAST' [ 75s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password again: "); [ 75s] ^ [ 75s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar *' [ 75s] xmlStrPrintf (xmlChar *buf, [ 75s] ^ [ 75s] CC libxmlsec1_openssl_la-digests.lo [ 75s] CC libxmlsec1_openssl_la-evp.lo [ 75s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 75s] CC libxmlsec1_openssl_la-hmac.lo [ 76s] CC libxmlsec1_openssl_la-kw_aes.lo [ 76s] CC libxmlsec1_openssl_la-kw_des.lo [ 76s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 76s] CC libxmlsec1_openssl_la-signatures.lo [ 77s] CC libxmlsec1_openssl_la-symkeys.lo [ 77s] CC libxmlsec1_openssl_la-x509.lo [ 77s] CC libxmlsec1_openssl_la-x509vfy.lo [ 78s] CCLD libxmlsec1-openssl.la [ 78s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 79s] Making all in gcrypt [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 79s] CC libxmlsec1_gcrypt_la-asn1.lo [ 79s] CC libxmlsec1_gcrypt_la-app.lo [ 79s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 79s] CC libxmlsec1_gcrypt_la-crypto.lo [ 79s] CC libxmlsec1_gcrypt_la-digests.lo [ 79s] CC libxmlsec1_gcrypt_la-hmac.lo [ 79s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 79s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 79s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 79s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 80s] CC libxmlsec1_gcrypt_la-signatures.lo [ 81s] CCLD libxmlsec1-gcrypt.la [ 81s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 81s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 81s] Making all in apps [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 81s] CC xmlsec.o [ 81s] CC cmdline.o [ 81s] CC crypto.o [ 81s] CCLD xmlsec1 [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 82s] Making all in man [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 82s] make[2]: Nothing to be done for 'all'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 82s] Making all in docs [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 82s] Copying docs... [ 82s] Making all in api [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 82s] Copying api-docs... [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 82s] make[3]: Nothing to be done for 'all-am'. [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 82s] + exit 0 [ 82s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JI92q6 [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd xmlsec1-1.2.22 [ 82s] + LANG=C [ 82s] + export LANG [ 82s] + unset DISPLAY [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm [ 82s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm [ 82s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm install [ 82s] Making install in include [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 82s] Making install in xmlsec [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] Making install in private [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 82s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 82s] /bin/make install-exec-hook [ 82s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 82s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/private [ 82s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/private' [ 82s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/private' [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 82s] Making install in openssl [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 82s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 82s] /bin/make install-exec-hook [ 82s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 82s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/openssl [ 82s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/openssl' [ 82s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/openssl' [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 82s] Making install in gcrypt [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 82s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 82s] /bin/make install-exec-hook [ 82s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 82s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/gcrypt [ 82s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 82s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] /bin/make install-exec-hook [ 82s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec [ 82s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec' [ 82s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h soap.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/include/xmlsec1/xmlsec' [ 82s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 82s] make[3]: Nothing to be done for 'install-exec-am'. [ 82s] make[3]: Nothing to be done for 'install-data-am'. [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 82s] Making install in src [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 82s] Making install in . [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 82s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 82s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.22 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1.so.1.2.22 [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so.1; }; }) [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so; }; }) [ 82s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1.la [ 82s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1.a [ 82s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1.a [ 82s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1.a [ 82s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 82s] make[3]: Nothing to be done for 'install-data-am'. [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 82s] Making install in openssl [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 82s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 82s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 3:22:2 -o libxmlsec1-openssl.la -rpath /usr/lib libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -lssl -lcrypto -lxslt -lxml2 -lz -llzma -lm -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm) [ 82s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 82s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-openssl.so.1.2.22 [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1; }; }) [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so; }; }) [ 82s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-openssl.la [ 82s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-openssl.a [ 82s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-openssl.a [ 82s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-openssl.a [ 82s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 82s] make[3]: Nothing to be done for 'install-data-am'. [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 82s] Making install in gcrypt [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 82s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 82s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 3:22:2 -o libxmlsec1-gcrypt.la -rpath /usr/lib libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -lgcrypt -lgpg-error -lxslt -lxml2 -lz -llzma -lm -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm) [ 82s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 83s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.22 [ 83s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1; }; }) [ 83s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so; }; }) [ 83s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-gcrypt.la [ 83s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-gcrypt.a [ 83s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-gcrypt.a [ 83s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-gcrypt.a [ 83s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 83s] make[3]: Nothing to be done for 'install-data-am'. [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 83s] Making install in apps [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 83s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/bin' [ 83s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/bin' [ 83s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib' [ 83s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/libxmlsec1.la' has not been installed in `/usr/lib' [ 83s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib' [ 83s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/bin/xmlsec1 [ 83s] make[2]: Nothing to be done for 'install-data-am'. [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 83s] Making install in man [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 83s] make[2]: Nothing to be done for 'install-exec-am'. [ 83s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/man/man1' [ 83s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/man/man1' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 83s] Making install in docs [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 83s] Making install in api [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 83s] make[3]: Nothing to be done for 'install-exec-am'. [ 83s] make[3]: Nothing to be done for 'install-data-am'. [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 83s] make[3]: Nothing to be done for 'install-exec-am'. [ 83s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1 [ 83s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1/images [ 83s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1/api [ 83s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1/api/images [ 83s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1 [ 83s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1 [ 83s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1/images [ 83s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1/api [ 83s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 83s] Makefile:794: recipe for target 'install-data-local' failed [ 83s] make[3]: [install-data-local] Error 1 (ignored) [ 83s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1/api/images [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 83s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/bin' [ 83s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/bin' [ 83s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 83s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib' [ 83s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/aclocal' [ 83s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/aclocal' [ 83s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig' [ 83s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 83s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 83s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/info/dir [ 83s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm -regex '.*\.la$' [ 83s] + xargs rm -f -- [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/info [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/packages [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1 [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/xmlsec1-1.2.22 [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/gtk-doc [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc [ 83s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/man [ 83s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 83s] + xargs rm -f -- [ 83s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 83s] + xargs rm -f -- [ 83s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 83s] + xargs rm -f -- [ 83s] + _target= [ 83s] + _symlinks=0 [ 83s] + _files=() [ 83s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm [ 83s] + read _file [ 83s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 83s] + _files+=($_file) [ 83s] + read _file [ 83s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1.pc [ 83s] + _files+=($_file) [ 83s] + read _file [ 83s] + test -z [ 83s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 83s] ++ for i in '${_files[*]}' [ 83s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 83s] ++ sort [ 83s] ++ for i in '${_files[*]}' [ 83s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1.pc [ 83s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 83s] ++ seq 1 1 [ 83s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 83s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1.pc [ 83s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1.pc [ 83s] + test 0 = 1 [ 83s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/pkgconfig/xmlsec1.pc [ 83s] + _files=() [ 83s] + read _file [ 83s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22 [ 83s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/bin/xmlsec1 [ 83s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.22 [ 84s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1-openssl.so.1.2.22 [ 84s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/lib/libxmlsec1.so.1.2.22 [ 84s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 84s] 4640 blocks [ 84s] + /usr/lib/rpm/check-buildroot [ 84s] + /usr/lib/rpm//brp-compress [ 84s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 85s] + /usr/lib/rpm/brp-python-hardlink [ 85s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm [ 85s] Processing files: xmlsec1-1.2.22-1.1.armv7l [ 85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 85s] [ 85s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.qzLPV3 [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd xmlsec1-1.2.22 [ 85s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/licenses/xmlsec1 [ 85s] + export LICENSEDIR [ 85s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/licenses/xmlsec1 [ 85s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/licenses/xmlsec1 [ 85s] + exit 0 [ 85s] Provides: libxmlsec1.so.1 xmlsec1 = 1.2.22-1.1 xmlsec1(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Requires(post): /sbin/ldconfig [ 85s] Requires(postun): /sbin/ldconfig [ 85s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.2) libxmlsec1-openssl.so.1 libxmlsec1.so.1 libxslt.so.1 libxslt.so.1(LIBXML2_1.0.11) libxslt.so.1(LIBXML2_1.0.22) rtld(GNU_HASH) [ 85s] Processing files: xmlsec1-debugsource-1.2.22-1.1.armv7l [ 85s] Provides: xmlsec1-debugsource = 1.2.22-1.1 xmlsec1-debugsource(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 85s] Processing files: xmlsec1-gcrypt-1.2.22-1.1.armv7l [ 85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 85s] [ 85s] Provides: libxmlsec1-gcrypt.so.1 xmlsec1-gcrypt = 1.2.22-1.1 xmlsec1-gcrypt(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Requires(post): /sbin/ldconfig [ 85s] Requires(postun): /sbin/ldconfig [ 85s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxmlsec1.so.1 rtld(GNU_HASH) [ 85s] Processing files: xmlsec1-openssl-1.2.22-1.1.armv7l [ 85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 85s] [ 85s] Provides: libxmlsec1-openssl.so.1 xmlsec1-openssl = 1.2.22-1.1 xmlsec1-openssl(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Requires(post): /sbin/ldconfig [ 85s] Requires(postun): /sbin/ldconfig [ 85s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxmlsec1.so.1 rtld(GNU_HASH) [ 85s] Processing files: xmlsec1-devel-1.2.22-1.1.armv7l [ 85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 85s] [ 85s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.ea7WD1 [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd xmlsec1-1.2.22 [ 85s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/packages/xmlsec1-devel [ 85s] + export DOCDIR [ 85s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/packages/xmlsec1-devel [ 85s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm/usr/share/doc/packages/xmlsec1-devel [ 85s] + exit 0 [ 85s] Provides: pkgconfig(xmlsec1) = 1.2.22 pkgconfig(xmlsec1-gcrypt) = 1.2.22 pkgconfig(xmlsec1-openssl) = 1.2.22 xmlsec1-devel = 1.2.22-1.1 xmlsec1-devel(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1 libxmlsec1-openssl.so.1 libxmlsec1.so.1 pkgconfig(libxml-2.0) >= 2.7.4 pkgconfig(libxslt) >= 1.0.20 [ 85s] Processing files: xmlsec1-devel-static-1.2.22-1.1.armv7l [ 85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 85s] [ 85s] Provides: xmlsec1-devel-static = 1.2.22-1.1 xmlsec1-devel-static(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Processing files: xmlsec1-debuginfo-1.2.22-1.1.armv7l [ 85s] warning: File listed twice: /usr/lib/debug/.build-id [ 85s] Provides: xmlsec1-debuginfo = 1.2.22-1.1 xmlsec1-debuginfo(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.22-1.1.armv7l [ 85s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.22-1.1 xmlsec1-gcrypt-debuginfo(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Processing files: xmlsec1-openssl-debuginfo-1.2.22-1.1.armv7l [ 85s] Provides: xmlsec1-openssl-debuginfo = 1.2.22-1.1 xmlsec1-openssl-debuginfo(armv7l-32) = 1.2.22-1.1 [ 85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 85s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm [ 85s] warning: Could not canonicalize hostname: obsnw20 [ 85s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-1.1.src.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.22-1.1.armv7l.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.22-1.1.armv7l.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.22-1.1.armv7l.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.22-1.1.armv7l.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.22-1.1.armv7l.rpm [ 87s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.22-1.1.armv7l.rpm [ 87s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.22-1.1.armv7l.rpm [ 87s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.22-1.1.armv7l.rpm [ 87s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.22-1.1.armv7l.rpm [ 87s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qmePnu [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd xmlsec1-1.2.22 [ 87s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-1.1.arm [ 87s] + exit 0 [ 87s] ... checking for files with abuild user/group [ 87s] ... creating baselibs [ 88s] [ 88s] obsnw20 finished "build xmlsec1.spec" at Sat Apr 22 21:05:53 UTC 2017. [ 88s] Retried build at Fri May 26 12:01:07 2017 returned same result, skipped Retried build at Fri Jun 9 08:58:03 2017 returned same result, skipped Retried build at Wed Jun 14 05:02:07 2017 returned same result, skipped Retried build at Mon Jun 19 07:59:05 2017 returned same result, skipped Retried build at Fri Jul 14 04:28:28 2017 returned same result, skipped Retried build at Fri Jul 14 05:56:19 2017 returned same result, skipped Retried build at Wed Nov 8 01:20:31 2017 returned same result, skipped Retried build at Wed Nov 8 02:51:14 2017 returned same result, skipped