[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw28 started "build _service:gbs:libinput.spec" at Thu May 18 01:10:19 UTC 2017. [ 0s] [ 0s] Building libinput for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '91a1a81186f6bd23c7032bbd871fa784' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:libinput.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:libinput.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:libinput.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-armv7l postinstall script [ 6s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 6s] reordering...cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 7s] [1/107] installing libmagic-data-5.28-1.19 [ 7s] [2/107] installing setup-0.9-1.8 [ 7s] [3/107] installing terminfo-base-5.9-1.21 [ 7s] [4/107] installing filesystem-3.1-1.2 [ 7s] [5/107] installing glibc-2.20-1.2 [ 7s] [6/107] installing libatomic-4.9.2-1.6 [ 7s] [7/107] installing libgcc-4.9.2-1.6 [ 7s] [8/107] installing libgomp-4.9.2-1.6 [ 7s] [9/107] installing bash-3.2.57-2.1 [ 7s] [10/107] installing capi-base-common-0.4.12-1.1 [ 7s] [11/107] installing cpio-2.11-1.3 [ 7s] [12/107] installing diffutils-3.3-1.3 [ 7s] [13/107] installing findutils-4.3.8-1.22 [ 7s] [14/107] installing hostname-3.12-1.3 [ 7s] [15/107] installing libattr-2.4.47-1.21 [ 7s] [16/107] installing libbz2-1.0.6-1.43 [ 7s] [17/107] installing libcap-2.24-1.21 [ 7s] [18/107] installing libelf-0.153-1.25 [ 7s] [19/107] installing libevdev-1.2.2-1.1 [ 8s] [20/107] installing libevent-2.0.20-1.1 [ 8s] [21/107] installing libext2fs-1.42.13-1.2 [ 8s] [22/107] installing libfreebl3-3.23-1.37 [ 8s] [23/107] installing libitm-4.9.2-1.6 [ 8s] [24/107] installing libltdl-2.4.2-1.25 [ 8s] [25/107] installing liblua-5.1.4-1.5 [ 8s] [26/107] installing liblzma-5.2.2-1.19 [ 8s] [27/107] installing libmtdev-1.1.5-1.1 [ 8s] [28/107] installing libpcre-8.39-1.3 [ 8s] [29/107] installing libpopt-1.16-1.5 [ 8s] [30/107] installing libsmack-1.3.0-1.20 [ 8s] [31/107] installing libsmartcols-2.28-1.3 [ 8s] [32/107] installing libsqlite-3.8.10.2-1.5 [ 8s] [33/107] installing libstdc++-4.9.2-1.6 [ 8s] [34/107] installing libuuid-2.28-1.3 [ 8s] [35/107] installing m4-1.4.17-1.3 [ 8s] [36/107] installing net-tools-2.0_20121208git-1.3 [ 8s] [37/107] installing nspr-4.12-1.10 [ 8s] [38/107] installing patch-2.7-1.5 [ 8s] [39/107] installing pkg-config-0.28-1.24 [ 9s] [40/107] installing sed-4.1c-1.3 [ 9s] [41/107] installing update-alternatives-1.16.3-1.3 [ 9s] [42/107] installing which-2.20-1.3 [ 9s] [43/107] installing zlib-1.2.8-1.25 [ 9s] [44/107] installing libncurses-5.9-1.21 [ 9s] [45/107] installing shadow-utils-4.1.4.2-1.2 [ 9s] [46/107] installing build-compare-2015.04.28-1.16 [ 9s] [47/107] installing libstdc++-devel-4.9.2-1.6 [ 9s] [48/107] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 10s] [49/107] installing capi-base-common-devel-0.4.12-1.1 [ 10s] [50/107] installing cpp-4.9.2-1.6 [ 11s] [51/107] installing gcc-c++-4.9.2-1.6 [ 11s] [52/107] installing libevdev-devel-1.2.2-1.1 [ 11s] [53/107] installing binutils-2.25-1.11 [ 12s] [54/107] installing coreutils-6.9-1.3 [ 12s] [55/107] installing db4-4.8.30.NC-1.28 [ 12s] [56/107] installing gawk-3.1.5-1.3 [ 12s] [57/107] installing grep-2.5.2-1.3 [ 12s] [58/107] installing less-466-1.3 [ 12s] [59/107] installing libacl-2.2.52-1.22 [ 12s] [60/107] installing libasm-0.153-1.25 [ 12s] [61/107] installing libblkid-2.28-1.3 [ 12s] [62/107] installing libreadline-5.2-1.20 [ 12s] [63/107] installing libubsan-4.9.2-1.6 [ 12s] [64/107] installing make-4.0-1.5 [ 12s] [65/107] installing nss-certs-3.23-1.37 [ 12s] [66/107] installing smack-1.3.0-1.20 [ 12s] [67/107] installing bzip2-1.0.6-1.43 [ 12s] [68/107] installing libkmod-18-1.1 [ 12s] [69/107] installing libmagic-5.28-1.19 [ 12s] [70/107] installing libxml2-2.9.4-2.17 [ 12s] [71/107] installing xz-5.2.2-1.19 [ 12s] [72/107] installing ttrace-1.0.3-1.1 [ 12s] [73/107] installing libdw-0.153-1.25 [ 13s] [74/107] installing linux-glibc-devel-3.10-1.26 [ 13s] [75/107] installing file-5.28-1.19 [ 13s] [76/107] installing glibc-locale-2.20-1.2 [ 13s] [77/107] installing libmount-2.28-1.3 [ 13s] [78/107] installing tar-1.17-1.3 [ 13s] [79/107] installing gzip-1.3.12-1.21 [ 13s] [80/107] installing libfdisk1-2.28-1.3 [ 13s] [81/107] installing pam-1.1.6-1.2 [ 13s] [82/107] installing perl-5.20.0-1.27 [ 15s] [83/107] installing tzdata-2016i-1.1 [ 15s] [84/107] installing elfutils-0.153-1.25 [ 15s] [85/107] installing gcc-4.9.2-1.6 [ 15s] [86/107] installing build-mkbaselibs-20120927-1.3 [ 15s] [87/107] installing glibc-devel-2.20-1.2 [ 15s] [88/107] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 20s] [89/107] installing autoconf-2.69-1.28 [ 20s] [90/107] installing libsystemd-219-1.1 [ 20s] [91/107] installing util-linux-2.28-1.3 [ 20s] [92/107] installing systemd-219-1.1 [ 21s] [93/107] installing mtdev-devel-1.1.5-1.1 [ 21s] [94/107] installing systemd-devel-219-1.1 [ 21s] [95/107] installing zlib-devel-1.2.8-1.25 [ 21s] [96/107] installing automake-1.14.1-1.23 [ 21s] [97/107] installing libevent-devel-2.0.20-1.1 [ 21s] [98/107] installing util-linux-su-2.28-1.3 [ 21s] [99/107] installing build-20120927-1.3 [ 21s] [100/107] installing libdlog-0.5.1-1.1 [ 21s] [101/107] installing libdlog-devel-0.5.1-1.1 [ 21s] [102/107] installing libtool-2.4.2-1.25 [ 21s] [103/107] installing ttrace-devel-1.0.3-1.1 [ 21s] [104/107] installing nss-3.23-1.37 [ 21s] [105/107] installing libsoftokn3-3.23-1.37 [ 21s] [106/107] installing rpm-4.11.0.1-1.14 [ 21s] [107/107] installing rpm-build-4.11.0.1-1.14 [ 22s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 22s] now finalizing build dir... [ 22s] build target is armv7l-tizen-linux [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for libinput.spec: [ 22s] 6c6 [ 22s] < Release: 0 [ 22s] --- [ 22s] > Release: 3.1 [ 22s] ----------------------------------------------------------------- [ 22s] ----- building libinput.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/91a1a81186f6bd23c7032bbd871fa784-libinput' -ba /home/abuild/rpmbuild/SOURCES/libinput.spec [ 22s] Building target platforms: armv7l-tizen-linux [ 22s] Building for target armv7l-tizen-linux [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pEwbh2 [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf libinput-0.11.0 [ 22s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libinput-0.11.0.tar.gz [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd libinput-0.11.0 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + echo 'Patch #0 (0001-Add-a-patch-for-support-extra-touch-events.patch):' [ 22s] Patch #0 (0001-Add-a-patch-for-support-extra-touch-events.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Add-a-patch-for-support-extra-touch-events.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] patching file src/evdev.h [ 22s] patching file src/libinput-private.h [ 22s] patching file src/libinput-util.h [ 22s] patching file src/libinput.c [ 22s] patching file src/libinput.h [ 22s] patching file src/libinput.sym [ 22s] + echo 'Patch #1 (0002-Add-ttrace.patch):' [ 22s] Patch #1 (0002-Add-ttrace.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Add-ttrace.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file configure.ac [ 22s] patching file src/Makefile.am [ 22s] patching file src/evdev.c [ 22s] patching file src/libinput-private.h [ 22s] patching file src/libinput.c [ 22s] + echo 'Patch #2 (0003-Remove-unnecessary-ttrace-and-add-ttrace-logs-to-ano.patch):' [ 22s] Patch #2 (0003-Remove-unnecessary-ttrace-and-add-ttrace-logs-to-ano.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Remove-unnecessary-ttrace-and-add-ttrace-logs-to-ano.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] + echo 'Patch #3 (0004-Modify-a-ttrace-macro-name-TRACE_BEGIN-to-TRACE_INPU.patch):' [ 22s] Patch #3 (0004-Modify-a-ttrace-macro-name-TRACE_BEGIN-to-TRACE_INPU.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-Modify-a-ttrace-macro-name-TRACE_BEGIN-to-TRACE_INPU.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] patching file src/libinput-private.h [ 22s] patching file src/libinput.c [ 22s] + echo 'Patch #4 (0005-Add-a-new-API-to-return-wheel-click-angle-value.patch):' [ 22s] Patch #4 (0005-Add-a-new-API-to-return-wheel-click-angle-value.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-Add-a-new-API-to-return-wheel-click-angle-value.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] patching file src/evdev.h [ 22s] patching file src/libinput.c [ 22s] patching file src/libinput.h [ 22s] patching file src/libinput.sym [ 22s] + echo 'Patch #5 (0006-Add-a-device-only-when-the-device-is-not-created-by-.patch):' [ 22s] Patch #5 (0006-Add-a-device-only-when-the-device-is-not-created-by-.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-Add-a-device-only-when-the-device-is-not-created-by-.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/libinput-private.h [ 22s] patching file src/path.c [ 22s] patching file src/udev-seat.c [ 22s] + echo 'Patch #6 (0007-svace-Modify-a-strerror-function-to-strerror_r-to-gu.patch):' [ 22s] Patch #6 (0007-svace-Modify-a-strerror-function-to-strerror_r-to-gu.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-svace-Modify-a-strerror-function-to-strerror_r-to-gu.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] + echo 'Patch #7 (0008-Call-a-input_set_default_property-in-evdev_device_cr.patch):' [ 22s] Patch #7 (0008-Call-a-input_set_default_property-in-evdev_device_cr.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-Call-a-input_set_default_property-in-evdev_device_cr.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file configure.ac [ 22s] patching file src/evdev.c [ 22s] + echo 'Patch #8 (0009-Set-receive-buffer-size-from-UDEV_MONITOR_BUFFER_SIZ.patch):' [ 22s] Patch #8 (0009-Set-receive-buffer-size-from-UDEV_MONITOR_BUFFER_SIZ.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-Set-receive-buffer-size-from-UDEV_MONITOR_BUFFER_SIZ.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/udev-seat.c [ 22s] + echo 'Patch #9 (0010-evdev-Do-not-open-the-already-opened-device.patch):' [ 22s] Patch #9 (0010-evdev-Do-not-open-the-already-opened-device.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-evdev-Do-not-open-the-already-opened-device.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] + echo 'Patch #10 (0011-evdev-fix-a-warning.patch):' [ 22s] Patch #10 (0011-evdev-fix-a-warning.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-evdev-fix-a-warning.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] + echo 'Patch #11 (0012-Ignore-joystick-devices-if-LIBINPUT_IGNORE_JOYSTICK-.patch):' [ 22s] Patch #11 (0012-Ignore-joystick-devices-if-LIBINPUT_IGNORE_JOYSTICK-.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0012-Ignore-joystick-devices-if-LIBINPUT_IGNORE_JOYSTICK-.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] + echo 'Patch #12 (0013-Import-opensource-codes-for-security-issue.patch):' [ 22s] Patch #12 (0013-Import-opensource-codes-for-security-issue.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0013-Import-opensource-codes-for-security-issue.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/libinput-private.h [ 22s] patching file src/udev-seat.c [ 22s] + echo 'Patch #13 (0014-support-a-AUX-code-events-generated-from-EV_ABS.patch):' [ 22s] Patch #13 (0014-support-a-AUX-code-events-generated-from-EV_ABS.patch): [ 22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0014-support-a-AUX-code-events-generated-from-EV_ABS.patch [ 22s] + /bin/patch -p1 --fuzz=2 [ 22s] patching file src/evdev.c [ 22s] patching file src/evdev.h [ 22s] patching file src/libinput-private.h [ 22s] patching file src/libinput.c [ 22s] patching file src/libinput.h [ 22s] patching file src/libinput.sym [ 22s] + cp /home/abuild/rpmbuild/SOURCES/libinput.manifest . [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-udev-dir=/usr/lib/udev [ 25s] autoreconf: Entering directory `.' [ 25s] autoreconf: configure.ac: not using Gettext [ 26s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 34s] autoreconf: configure.ac: tracing [ 35s] autoreconf: running: libtoolize --copy --force [ 35s] libtoolize: putting auxiliary files in `.'. [ 35s] libtoolize: copying file `./ltmain.sh' [ 35s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 35s] libtoolize: copying file `m4/libtool.m4' [ 35s] libtoolize: copying file `m4/ltoptions.m4' [ 36s] libtoolize: copying file `m4/ltsugar.m4' [ 36s] libtoolize: copying file `m4/ltversion.m4' [ 36s] libtoolize: copying file `m4/lt~obsolete.m4' [ 44s] autoreconf: running: /usr/bin/autoconf --force [ 49s] autoreconf: running: /usr/bin/autoheader --force [ 51s] autoreconf: running: automake --add-missing --copy --force-missing [ 53s] configure.ac:37: installing './compile' [ 53s] configure.ac:46: installing './config.guess' [ 53s] configure.ac:46: installing './config.sub' [ 53s] configure.ac:23: installing './install-sh' [ 53s] configure.ac:23: installing './missing' [ 54s] src/Makefile.am: installing './depcomp' [ 55s] parallel-tests: installing './test-driver' [ 57s] autoreconf: Leaving directory `.' [ 57s] checking for a BSD-compatible install... /usr/bin/install -c [ 57s] checking whether build environment is sane... yes [ 57s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 57s] checking for gawk... gawk [ 57s] checking whether make sets $(MAKE)... yes [ 57s] checking whether make supports nested variables... yes [ 57s] checking whether make supports nested variables... (cached) yes [ 57s] checking for style of include used by make... GNU [ 57s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 57s] checking whether the C compiler works... yes [ 57s] checking for C compiler default output file name... a.out [ 57s] checking for suffix of executables... [ 57s] checking whether we are cross compiling... no [ 57s] checking for suffix of object files... o [ 57s] checking whether we are using the GNU C compiler... yes [ 57s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 57s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 57s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 58s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 58s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 58s] checking for grep that handles long lines and -e... /usr/bin/grep [ 58s] checking for egrep... /usr/bin/grep -E [ 58s] checking for ANSI C header files... yes [ 58s] checking for sys/types.h... yes [ 58s] checking for sys/stat.h... yes [ 58s] checking for stdlib.h... yes [ 58s] checking for string.h... yes [ 58s] checking for memory.h... yes [ 58s] checking for strings.h... yes [ 58s] checking for inttypes.h... yes [ 58s] checking for stdint.h... yes [ 58s] checking for unistd.h... yes [ 58s] checking minix/config.h usability... no [ 58s] checking minix/config.h presence... no [ 58s] checking for minix/config.h... no [ 58s] checking whether it is safe to define __EXTENSIONS__... yes [ 58s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... -std=gnu99 [ 58s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 58s] checking whether we are using the GNU C++ compiler... yes [ 58s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 58s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 58s] checking for grep that handles long lines and -e... (cached) /usr/bin/grep [ 58s] checking build system type... armv7l-tizen-linux-gnueabi [ 58s] checking host system type... armv7l-tizen-linux-gnueabi [ 58s] checking how to print strings... printf [ 58s] checking for a sed that does not truncate output... /usr/bin/sed [ 58s] checking for fgrep... /usr/bin/grep -F [ 58s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc -std=gnu99... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 58s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 58s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 58s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 58s] checking whether ln -s works... yes [ 58s] checking the maximum length of command line arguments... 1572864 [ 58s] checking whether the shell understands some XSI constructs... yes [ 58s] checking whether the shell understands "+="... yes [ 58s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 58s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 58s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 58s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 58s] checking for objdump... objdump [ 58s] checking how to recognize dependent libraries... pass_all [ 58s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 58s] checking for dlltool... no [ 58s] checking how to associate runtime and link libraries... printf %s\n [ 58s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 58s] checking for ar... ar [ 58s] checking for archiver @FILE support... @ [ 58s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 58s] checking for strip... strip [ 58s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 58s] checking for ranlib... ranlib [ 58s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc -std=gnu99 object... ok [ 58s] checking for sysroot... no [ 58s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 58s] checking for mt... no [ 58s] checking if : is a manifest tool... no [ 58s] checking for dlfcn.h... yes [ 58s] checking for objdir... .libs [ 59s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no [ 59s] checking for armv7l-tizen-linux-gnueabi-gcc -std=gnu99 option to produce PIC... -fPIC -DPIC [ 59s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes [ 59s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 static flag -static works... no [ 59s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -c -o file.o... yes [ 59s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -c -o file.o... (cached) yes [ 59s] checking whether the armv7l-tizen-linux-gnueabi-gcc -std=gnu99 linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 59s] checking whether -lc should be explicitly linked in... no [ 59s] checking dynamic linker characteristics... GNU/Linux ld.so [ 59s] checking how to hardcode library paths into programs... immediate [ 59s] checking whether stripping libraries is possible... yes [ 59s] checking if libtool supports shared libraries... yes [ 59s] checking whether to build shared libraries... yes [ 59s] checking whether to build static libraries... yes [ 59s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 59s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 59s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 59s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 59s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 59s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 59s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 59s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 59s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 59s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 59s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 59s] checking how to hardcode library paths into programs... immediate [ 59s] checking whether EPOLL_CLOEXEC is declared... yes [ 59s] checking whether TFD_CLOEXEC is declared... yes [ 59s] checking whether CLOCK_MONOTONIC is declared... yes [ 59s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 59s] checking pkg-config is at least version 0.9.0... yes [ 59s] checking for MTDEV... yes [ 59s] checking for LIBUDEV... yes [ 59s] checking for LIBEVDEV... yes [ 60s] checking for atan2 in -lm... yes [ 60s] checking for clock_gettime in -lrt... yes [ 60s] checking for doxygen... no [ 60s] checking for dot... no [ 60s] checking for CHECK... no [ 60s] checking for TTRACE... yes [ 60s] checking for library containing input_set_default_property... no [ 60s] checking that generated files are newer than configure... done [ 60s] configure: creating ./config.status [ 61s] config.status: creating Makefile [ 61s] config.status: creating doc/Makefile [ 61s] config.status: creating doc/libinput.doxygen [ 61s] config.status: creating src/Makefile [ 61s] config.status: creating src/libinput.pc [ 61s] config.status: creating src/libinput-version.h [ 61s] config.status: creating test/Makefile [ 61s] config.status: creating tools/Makefile [ 61s] config.status: creating udev/Makefile [ 61s] config.status: creating test/symbols-leak-test [ 61s] config.status: creating config.h [ 61s] config.status: executing depfiles commands [ 62s] config.status: executing libtool commands [ 62s] [ 62s] Prefix /usr [ 62s] udev base dir /usr/lib/udev [ 62s] [ 62s] Build documentation no [ 62s] Build tests no [ 62s] Tests use valgrind [ 62s] Build GUI event tool no [ 62s] [ 62s] + exit 0 [ 62s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XmR4Ax [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd libinput-0.11.0 [ 62s] ++ uname -m [ 62s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 62s] + export CFLAGS [ 62s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 62s] + export CXXFLAGS [ 62s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 62s] + export FFLAGS [ 62s] + LDFLAGS= [ 62s] + export LDFLAGS [ 62s] + LD_AS_NEEDED=1 [ 62s] + export LD_AS_NEEDED [ 62s] + /bin/make -j8 [ 62s] /bin/make all-recursive [ 62s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 62s] Making all in src [ 62s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/src' [ 62s] CC libinput_la-libinput.lo [ 62s] CC libinput_la-evdev.lo [ 62s] CC libinput_la-evdev-mt-touchpad.lo [ 62s] CC libinput_la-evdev-mt-touchpad-tap.lo [ 62s] CC libinput_la-evdev-mt-touchpad-buttons.lo [ 62s] CC libinput_la-filter.lo [ 62s] CC libinput_la-path.lo [ 62s] CC libinput_la-evdev-mt-touchpad-edge-scroll.lo [ 62s] CC libinput_la-udev-seat.lo [ 62s] CC libinput_la-timer.lo [ 62s] CC libinput_util_la-libinput-util.lo [ 63s] CCLD libinput-util.la [ 63s] CCLD libinput.la [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/src' [ 64s] Making all in doc [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/doc' [ 64s] make[2]: Nothing to be done for 'all'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/doc' [ 64s] Making all in test [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/test' [ 64s] make[2]: Nothing to be done for 'all'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/test' [ 64s] Making all in tools [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/tools' [ 64s] CC shared.lo [ 64s] CC event_debug-event-debug.o [ 64s] event-debug.c: In function 'print_event_header': [ 64s] event-debug.c:70:2: warning: enumeration value 'LIBINPUT_EVENT_TOUCH_AUX_DATA' not handled in switch [-Wswitch] [ 64s] switch(libinput_event_get_type(ev)) { [ 64s] ^ [ 64s] event-debug.c: In function 'handle_and_print_events': [ 64s] event-debug.c:290:3: warning: enumeration value 'LIBINPUT_EVENT_TOUCH_AUX_DATA' not handled in switch [-Wswitch] [ 64s] switch (libinput_event_get_type(ev)) { [ 64s] ^ [ 64s] CCLD libshared.la [ 64s] CCLD event-debug [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/tools' [ 64s] Making all in udev [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/udev' [ 64s] CC libinput_device_group-libinput-device-group.o [ 64s] CCLD libinput-device-group [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/udev' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] + exit 0 [ 64s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.d6WB47 [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd libinput-0.11.0 [ 64s] + LANG=C [ 64s] + export LANG [ 64s] + unset DISPLAY [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm [ 64s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm [ 64s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm install [ 64s] Making install in src [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/src' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/src' [ 64s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib' [ 64s] /bin/sh ../libtool --mode=install /usr/bin/install -c libinput.la '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib' [ 64s] libtool: install: /usr/bin/install -c .libs/libinput.so.7.2.0 /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/libinput.so.7.2.0 [ 64s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib && { ln -s -f libinput.so.7.2.0 libinput.so.7 || { rm -f libinput.so.7 && ln -s libinput.so.7.2.0 libinput.so.7; }; }) [ 64s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib && { ln -s -f libinput.so.7.2.0 libinput.so || { rm -f libinput.so && ln -s libinput.so.7.2.0 libinput.so; }; }) [ 64s] libtool: install: /usr/bin/install -c .libs/libinput.lai /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/libinput.la [ 64s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 64s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/include' [ 64s] /usr/bin/install -c -m 644 libinput.h '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/include' [ 64s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/pkgconfig' [ 64s] /usr/bin/install -c -m 644 libinput.pc '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/pkgconfig' [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/src' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/src' [ 64s] Making install in doc [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/doc' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/doc' [ 64s] make[2]: Nothing to be done for 'install-exec-am'. [ 64s] make[2]: Nothing to be done for 'install-data-am'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/doc' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/doc' [ 64s] Making install in test [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/test' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/test' [ 64s] make[2]: Nothing to be done for 'install-exec-am'. [ 64s] make[2]: Nothing to be done for 'install-data-am'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/test' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/test' [ 64s] Making install in tools [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/tools' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/tools' [ 64s] make[2]: Nothing to be done for 'install-exec-am'. [ 64s] make[2]: Nothing to be done for 'install-data-am'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/tools' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/tools' [ 64s] Making install in udev [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/udev' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/udev' [ 64s] make[2]: Nothing to be done for 'install-exec-am'. [ 64s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/udev/rules.d' [ 64s] /usr/bin/install -c -m 644 80-libinput-device-groups.rules '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/udev/rules.d' [ 64s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/udev' [ 64s] /bin/sh ../libtool --mode=install /usr/bin/install -c libinput-device-group '/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/udev' [ 64s] libtool: install: /usr/bin/install -c libinput-device-group /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/udev/libinput-device-group [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/udev' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0/udev' [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] make[2]: Nothing to be done for 'install-exec-am'. [ 64s] make[2]: Nothing to be done for 'install-data-am'. [ 64s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libinput-0.11.0' [ 64s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/share/info/dir [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm -regex '.*\.la$' [ 64s] + xargs rm -f -- [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm -regex '.*\.a$' [ 64s] + xargs rm -f -- [ 64s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/libinput-0.11.0 [ 64s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/libinput.so.7.2.0 [ 65s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/lib/udev/libinput-device-group [ 65s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 65s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 65s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 65s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 65s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 65s] 843 blocks [ 65s] + /usr/lib/rpm/check-buildroot [ 65s] + /usr/lib/rpm//brp-compress [ 65s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 65s] + /usr/lib/rpm/brp-python-hardlink [ 65s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm [ 65s] Processing files: libinput-0.11.0-3.1.armv7l [ 65s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 65s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 65s] [ 65s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hXHmJK [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd libinput-0.11.0 [ 65s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/share/licenses/libinput [ 65s] + export LICENSEDIR [ 65s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/share/licenses/libinput [ 65s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm/usr/share/licenses/libinput [ 65s] + exit 0 [ 65s] Provides: libinput = 0.11.0-3.1 libinput(armv7l-32) = 0.11.0-3.1 libinput.so.7 libinput.so.7(LIBINPUT_0.11.0) libinput.so.7(LIBINPUT_0.8.0) libinput.so.7(LIBINPUT_0.9.0) libinput.so.7(LIBINPUT_1.1_unreleased) [ 65s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 65s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 65s] Requires(post): /sbin/ldconfig [ 65s] Requires(postun): /sbin/ldconfig [ 65s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libc.so.6(GLIBC_2.9) libevdev.so.2 libevdev.so.2(LIBEVDEV_1) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libmtdev.so.1 librt.so.1 librt.so.1(GLIBC_2.4) libttrace.so.1 libudev.so.1 libudev.so.1(LIBUDEV_183) rtld(GNU_HASH) [ 65s] Processing files: libinput-debugsource-0.11.0-3.1.armv7l [ 65s] Provides: libinput-debugsource = 0.11.0-3.1 libinput-debugsource(armv7l-32) = 0.11.0-3.1 [ 65s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 65s] Processing files: libinput-devel-0.11.0-3.1.armv7l [ 65s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 65s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 65s] [ 65s] Provides: libinput-devel = 0.11.0-3.1 libinput-devel(armv7l-32) = 0.11.0-3.1 pkgconfig(libinput) = 0.11.0 [ 65s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 65s] Requires: /usr/bin/pkg-config libinput.so.7 pkgconfig(libudev) [ 65s] Processing files: libinput-debuginfo-0.11.0-3.1.armv7l [ 65s] warning: File listed twice: /usr/lib/debug/.build-id [ 65s] Provides: libinput-debuginfo = 0.11.0-3.1 libinput-debuginfo(armv7l-32) = 0.11.0-3.1 [ 65s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 65s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm [ 65s] warning: Could not canonicalize hostname: obspw28 [ 65s] Wrote: /home/abuild/rpmbuild/SRPMS/libinput-0.11.0-3.1.src.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libinput-0.11.0-3.1.armv7l.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libinput-debugsource-0.11.0-3.1.armv7l.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libinput-devel-0.11.0-3.1.armv7l.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libinput-debuginfo-0.11.0-3.1.armv7l.rpm [ 65s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.l0MdvA [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd libinput-0.11.0 [ 65s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libinput-0.11.0-3.1.arm [ 65s] + exit 0 [ 65s] ... checking for files with abuild user/group [ 65s] ... creating baselibs [ 66s] ... comparing built packages with the former built [ 66s] /usr/lib/build/pkg-diff.sh [ 66s] compare /.build.oldpackages/libinput-0.11.0-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/libinput-0.11.0-3.1.src.rpm [ 66s] This is not a prerelease project. Compare the project name. [ 66s] comparing rpmtags [ 66s] comparing RELEASE [ 66s] comparing PROVIDES [ 66s] comparing scripts [ 66s] comparing filelist [ 66s] comparing file checksum [ 66s] RPM meta information is identical [ 67s] compare /.build.oldpackages/libinput-0.11.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libinput-0.11.0-3.1.armv7l.rpm [ 67s] Comparing libinput-0.11.0-2.1.armv7l.rpm to libinput-0.11.0-3.1.armv7l.rpm [ 67s] This is not a prerelease project. Compare the project name. [ 67s] comparing rpmtags [ 67s] --- /tmp/tmp.YfFoq60524/tmp.MLnSz60542 2017-05-18 01:11:26.191051479 +0000 [ 67s] +++ /tmp/tmp.YfFoq60524/tmp.mRCJM60544 2017-05-18 01:11:26.203051337 +0000 [ 67s] @@ -15,4 +15,4 @@ [ 67s] cpio xz 5T [ 67s] [ 67s] (none) (none) (none) [ 67s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/d6c16f74eb2da0e5725ce4be50465602-libinput Tizen:3.0:Wearable / target-circle [ 67s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/91a1a81186f6bd23c7032bbd871fa784-libinput Tizen:3.0:Wearable / target-circle [ 67s] RPM meta information is different [ 67s] compare /.build.oldpackages/libinput-debuginfo-0.11.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libinput-debuginfo-0.11.0-3.1.armv7l.rpm [ 67s] skipping -debuginfo package [ 67s] compare /.build.oldpackages/libinput-debugsource-0.11.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libinput-debugsource-0.11.0-3.1.armv7l.rpm [ 67s] Comparing libinput-debugsource-0.11.0-2.1.armv7l.rpm to libinput-debugsource-0.11.0-3.1.armv7l.rpm [ 67s] This is not a prerelease project. Compare the project name. [ 67s] comparing rpmtags [ 67s] --- /tmp/tmp.ThSdG60564/tmp.zVUzB60582 2017-05-18 01:11:26.427048659 +0000 [ 67s] +++ /tmp/tmp.ThSdG60564/tmp.GYIWM60584 2017-05-18 01:11:26.435048563 +0000 [ 67s] @@ -10,4 +10,4 @@ [ 67s] cpio xz 5T [ 67s] [ 67s] (none) (none) (none) [ 67s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/d6c16f74eb2da0e5725ce4be50465602-libinput Tizen:3.0:Wearable / target-circle [ 67s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/91a1a81186f6bd23c7032bbd871fa784-libinput Tizen:3.0:Wearable / target-circle [ 67s] RPM meta information is different [ 67s] compare /.build.oldpackages/libinput-devel-0.11.0-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libinput-devel-0.11.0-3.1.armv7l.rpm [ 67s] Comparing libinput-devel-0.11.0-2.1.armv7l.rpm to libinput-devel-0.11.0-3.1.armv7l.rpm [ 67s] This is not a prerelease project. Compare the project name. [ 67s] comparing rpmtags [ 67s] --- /tmp/tmp.tpOVD60602/tmp.KihZv60620 2017-05-18 01:11:26.643046078 +0000 [ 67s] +++ /tmp/tmp.tpOVD60602/tmp.qWguo60622 2017-05-18 01:11:26.655045935 +0000 [ 67s] @@ -15,4 +15,4 @@ [ 67s] cpio xz 5T [ 67s] [ 67s] (none) (none) (none) [ 67s] -obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/d6c16f74eb2da0e5725ce4be50465602-libinput Tizen:3.0:Wearable / target-circle [ 67s] +obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/91a1a81186f6bd23c7032bbd871fa784-libinput Tizen:3.0:Wearable / target-circle [ 67s] RPM meta information is different [ 67s] [ 67s] obspw28 finished "build libinput.spec" at Thu May 18 01:11:26 UTC 2017. [ 67s] Retried build at Fri May 26 12:18:32 2017 returned same result, skipped Retried build at Tue May 30 23:58:36 2017 returned same result, skipped Retried build at Wed May 31 23:19:43 2017 returned same result, skipped Retried build at Thu Jun 8 07:16:19 2017 returned same result, skipped Retried build at Fri Jun 9 09:16:42 2017 returned same result, skipped Retried build at Wed Jun 14 05:20:10 2017 returned same result, skipped Retried build at Wed Jun 14 22:42:44 2017 returned same result, skipped Retried build at Mon Jun 19 08:03:54 2017 returned same result, skipped