[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw01 started "build _service:gbs:dos2unix.spec" at Fri Dec 22 17:31:19 UTC 2017. [ 0s] [ 0s] Building dos2unix for project 'Tizen:4.0:Unified' repository 'standard' arch 'armv7l' srcmd5 'e6ae400baf3623bc2bbb8e687602ab13' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/95] installing libmagic-data-5.31-3.31 [ 7s] [2/95] installing setup-0.9-2.8 [ 7s] warning: /etc/profile created as /etc/profile.rpmnew [ 7s] [3/95] installing filesystem-3.1-2.1 [ 7s] [4/95] installing glibc-2.24-4.10 [ 8s] [5/95] installing libatomic-6.2.1-3.12 [ 8s] [6/95] installing libgcc-6.2.1-3.12 [ 8s] [7/95] installing bash-3.2.57-3.1 [ 8s] [8/95] installing binutils-2.27-3.30 [ 8s] [9/95] installing cpio-2.11-2.1 [ 8s] [10/95] installing diffutils-3.3-2.1 [ 8s] [11/95] installing findutils-4.3.8-3.36 [ 8s] [12/95] installing hostname-3.12-2.1 [ 8s] [13/95] installing libattr-2.4.47-1.1 [ 8s] [14/95] installing libbz2-1.0.6-2.55 [ 8s] [15/95] installing libcap-2.24-2.64 [ 8s] [16/95] installing libelf-0.153-2.25 [ 8s] [17/95] installing libext2fs-1.43.4-2.2 [ 8s] [18/95] installing libfreebl3-3.23-2.43 [ 8s] [19/95] installing libgfortran-6.2.1-3.12 [ 9s] [20/95] installing libgomp-6.2.1-3.12 [ 9s] [21/95] installing libitm-6.2.1-3.12 [ 9s] [22/95] installing libltdl-2.4.2-2.50 [ 9s] [23/95] installing liblua-5.1.4-2.15 [ 9s] [24/95] installing liblzma-5.2.2-2.50 [ 9s] [25/95] installing libpcre-8.39-3.1 [ 9s] [26/95] installing libpopt-1.16-2.15 [ 9s] [27/95] installing libsmack-1.3.1-4.4 [ 9s] [28/95] installing libsmartcols-2.30-5.1 [ 9s] [29/95] installing libsqlite-3.18.0-5.4 [ 9s] [30/95] installing libstdc++-6.2.1-3.12 [ 9s] [31/95] installing libuuid-2.30-5.1 [ 9s] [32/95] installing m4-1.4.17-2.1 [ 9s] [33/95] installing net-tools-2.0_20121208git-2.1 [ 9s] [34/95] installing nspr-4.12-2.15 [ 9s] [35/95] installing patch-2.7-2.15 [ 9s] [36/95] installing pkg-config-0.28-3.33 [ 9s] [37/95] installing sed-4.1c-2.1 [ 9s] [38/95] installing update-alternatives-1.18.15-2.1 [ 9s] [39/95] installing which-2.20-2.1 [ 9s] [40/95] installing zlib-1.2.11-2.61 [ 9s] [41/95] installing build-compare-2015.04.28-2.34 [ 9s] [42/95] installing libstdc++-devel-6.2.1-3.12 [ 10s] [43/95] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 11s] [44/95] installing terminfo-base-full-5.9-3.26 [ 11s] [45/95] installing cpp-6.2.1-3.12 [ 11s] [46/95] installing gcc-c++-6.2.1-3.12 [ 12s] [47/95] installing coreutils-6.9-3.2 [ 12s] [48/95] installing db4-4.8.30.NC-2.59 [ 12s] [49/95] installing gawk-3.1.5-3.1 [ 12s] [50/95] installing grep-2.5.2-3.1 [ 12s] [51/95] installing libacl-2.2.52-2.62 [ 12s] [52/95] installing libasm-0.153-2.25 [ 12s] [53/95] installing libblkid-2.30-5.1 [ 12s] [54/95] installing libcc1-6.2.1-3.12 [ 12s] [55/95] installing libubsan-6.2.1-3.12 [ 12s] [56/95] installing make-4.0-2.15 [ 13s] [57/95] installing nss-certs-3.23-2.43 [ 13s] [58/95] installing smack-1.3.1-4.4 [ 13s] [59/95] installing bzip2-1.0.6-2.55 [ 13s] [60/95] installing gettext-runtime-0.19.7-2.20 [ 13s] [61/95] installing libmagic-5.31-3.31 [ 13s] [62/95] installing libxml2-2.9.4-2.42 [ 13s] [63/95] installing xz-5.2.2-2.50 [ 13s] [64/95] installing libdw-0.153-2.25 [ 13s] [65/95] installing linux-glibc-devel-3.10-2.62 [ 13s] [66/95] installing file-5.31-3.31 [ 13s] [67/95] installing glibc-locale-2.24-4.10 [ 13s] [68/95] installing libmount-2.30-5.1 [ 13s] [69/95] installing libncurses-5.9-3.26 [ 13s] [70/95] installing libncurses6-5.9-3.26 [ 14s] [71/95] installing tar-1.17-3.1 [ 14s] [72/95] installing gettext-tools-0.19.7-2.20 [ 14s] [73/95] installing gzip-1.3.12-3.36 [ 14s] [74/95] installing libfdisk-2.30-5.1 [ 14s] [75/95] installing pam-1.1.6-3.1 [ 14s] [76/95] installing perl-5.20.0-3.12 [ 15s] [77/95] installing tzdata-2017b-2.1 [ 15s] [78/95] installing elfutils-0.153-2.25 [ 15s] [79/95] installing gcc-6.2.1-3.12 [ 16s] [80/95] installing build-mkbaselibs-20120927-2.1 [ 16s] [81/95] installing glibc-devel-2.24-4.10 [ 16s] [82/95] installing qemu-accel-x86_64-armv7l-0.4-3.7 [ 21s] [83/95] installing autoconf-2.69-2.62 [ 21s] [84/95] installing less-466-2.1 [ 21s] [85/95] installing libreadline-5.2-2.55 [ 22s] [86/95] installing procps-ng-3.3.9-4.1 [ 22s] [87/95] installing automake-1.14.1-2.49 [ 22s] [88/95] installing build-20120927-2.1 [ 22s] [89/95] installing util-linux-2.30-5.1 [ 22s] [90/95] installing libtool-2.4.2-2.50 [ 22s] [91/95] installing util-linux-su-2.30-5.1 [ 22s] [92/95] installing nss-3.23-2.43 [ 22s] [93/95] installing libsoftokn3-3.23-2.43 [ 22s] [94/95] installing rpm-4.11.0.1-4.1 [ 22s] [95/95] installing rpm-build-4.11.0.1-4.1 [ 22s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 22s] now finalizing build dir... [ 23s] build target is armv7l-tizen-linux [ 23s] ----------------------------------------------------------------- [ 23s] I have the following modifications for dos2unix.spec: [ 23s] 4c4 [ 23s] < Release: 0 [ 23s] --- [ 23s] > Release: 2.7 [ 23s] ----------------------------------------------------------------- [ 23s] ----- building dos2unix.spec (user abuild) [ 23s] ----------------------------------------------------------------- [ 23s] ----------------------------------------------------------------- [ 23s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/standard/e6ae400baf3623bc2bbb8e687602ab13-dos2unix' -ba /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 23s] Building target platforms: armv7l-tizen-linux [ 23s] Building for target armv7l-tizen-linux [ 23s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.wAkf1H [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + rm -rf dos2unix-6.0 [ 23s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 23s] + /bin/tar -xf - [ 23s] + STATUS=0 [ 23s] + '[' 0 -ne 0 ']' [ 23s] + cd dos2unix-6.0 [ 23s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 23s] + echo 'Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch):' [ 23s] Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch): [ 23s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-encoding-is-changed-from-latin1-to-utf8.patch [ 23s] + /bin/patch -p1 --fuzz=2 [ 23s] patching file man/es/man1/dos2unix.pod [ 23s] patching file man/nl/man1/dos2unix.pod [ 23s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 23s] + find . -type f [ 23s] + xargs chmod -x [ 23s] + exit 0 [ 23s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QorGxy [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd dos2unix-6.0 [ 23s] ++ uname -m [ 23s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 23s] + LANG=C [ 23s] + export LANG [ 23s] + unset DISPLAY [ 23s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 23s] + export CFLAGS [ 23s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 23s] + export CXXFLAGS [ 23s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 23s] + export FFLAGS [ 23s] + LDFLAGS= [ 23s] + export LDFLAGS [ 23s] + LD_AS_NEEDED=1 [ 23s] + export LD_AS_NEEDED [ 23s] + export RPM_OPT_FLAGS [ 23s] + make -j4 CC=gcc HTMLEXT=html [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c dos2unix.c -o dos2unix.o [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c querycp.c -o querycp.o [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c common.c -o common.o [ 23s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c unix2dos.c -o unix2dos.o [ 23s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 23s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 24s] msgfmt -c po/de.po -o po/de.mo [ 24s] msgfmt -c po/es.po -o po/es.mo [ 24s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 24s] and iconv() does not support "ISO-8859-1". [ 24s] Installing GNU libiconv and then reinstalling GNU gettext [ 24s] would fix this problem. [ 24s] Continuing anyway. [ 24s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 24s] msgfmt -c po/eo.po -o po/eo.mo [ 24s] msgfmt -c po/nl.po -o po/nl.mo [ 24s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 24s] and iconv() does not support "ISO-8859-1". [ 24s] Installing GNU libiconv and then reinstalling GNU gettext [ 24s] would fix this problem. [ 24s] Continuing anyway. [ 24s] make -C man/man1 [ 24s] make -C man/man1 [ 24s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 24s] # make target - create manual page from a *.pod page [ 24s] podchecker dos2unix.pod [ 24s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 24s] # make target - create manual page from a *.pod page [ 24s] podchecker dos2unix.pod [ 24s] # make target - create manual page from a *.pod page [ 24s] podchecker ../nl/man1/dos2unix.pod [ 24s] make -C man/man1 [ 24s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 24s] # make target - create manual page from a *.pod page [ 24s] podchecker dos2unix.pod [ 24s] dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 24s] dos2unix.pod pod syntax OK. [ 24s] LC_CTYPE=C pod2man \ [ 24s] --center="$(date "+%Y-%m-%d")" \ [ 24s] --name="dos2unix" \ [ 24s] --section="1" \ [ 24s] dos2unix.pod \ [ 24s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 24s] > dos2unix.1 && \ [ 24s] rm -f pod*.tmp [ 25s] ../nl/man1/dos2unix.pod pod syntax OK. [ 25s] LC_CTYPE=C pod2man \ [ 25s] --center="$(date "+%Y-%m-%d")" \ [ 25s] --name="dos2unix" \ [ 25s] --section="1" \ [ 25s] ../nl/man1/dos2unix.pod \ [ 25s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 25s] > ../nl/man1/dos2unix.1 && \ [ 25s] rm -f pod*.tmp [ 25s] dos2unix.pod pod syntax OK. [ 25s] LC_CTYPE=C pod2man \ [ 25s] --center="$(date "+%Y-%m-%d")" \ [ 25s] --name="dos2unix" \ [ 25s] --section="1" \ [ 25s] dos2unix.pod \ [ 25s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 25s] > dos2unix.1 && \ [ 25s] rm -f pod*.tmp [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] dos2unix.1 [ 25s] perl -pli.bak \ [ 25s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 25s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 25s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 25s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 25s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 25s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 25s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 25s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 25s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 25s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 25s] dos2unix.1 [ 25s] # make target - create manual page from a *.pod page [ 25s] podchecker ../nl/man1/dos2unix.pod [ 25s] # make target - create manual page from a *.pod page [ 25s] podchecker ../es/man1/dos2unix.pod [ 26s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 26s] POD document had syntax errors at /bin/pod2man line 71. [ 26s] perl -pli.bak \ [ 26s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 26s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 26s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 26s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 26s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 26s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 26s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 26s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 26s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 26s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 26s] ../nl/man1/dos2unix.1 [ 26s] # make target - create manual page from a *.pod page [ 26s] podchecker ../es/man1/dos2unix.pod [ 26s] perl -pli.bak \ [ 26s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 26s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 26s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 26s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 26s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 26s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 26s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 26s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 26s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 26s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 26s] dos2unix.1 [ 26s] # make target - create manual page from a *.pod page [ 26s] podchecker ../nl/man1/dos2unix.pod [ 26s] ../nl/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../nl/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../nl/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] ../es/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../es/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../es/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] ../es/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../es/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../es/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 27s] ../nl/man1/dos2unix.pod pod syntax OK. [ 27s] LC_CTYPE=C pod2man \ [ 27s] --center="$(date "+%Y-%m-%d")" \ [ 27s] --name="dos2unix" \ [ 27s] --section="1" \ [ 27s] ../nl/man1/dos2unix.pod \ [ 27s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 27s] > ../nl/man1/dos2unix.1 && \ [ 27s] rm -f pod*.tmp [ 27s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 27s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../nl/man1/dos2unix.1 [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../es/man1/dos2unix.1 [ 27s] # make target - create manual page from a *.pod page [ 27s] podchecker ../es/man1/dos2unix.pod [ 27s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 27s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 27s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o dos2unix [ 27s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o unix2dos [ 27s] ln -sf dos2unix mac2unix [ 27s] ln -sf unix2dos unix2mac [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../es/man1/dos2unix.1 [ 27s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 27s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../nl/man1/dos2unix.1 [ 28s] ../es/man1/dos2unix.pod pod syntax OK. [ 28s] LC_CTYPE=C pod2man \ [ 28s] --center="$(date "+%Y-%m-%d")" \ [ 28s] --name="dos2unix" \ [ 28s] --section="1" \ [ 28s] ../es/man1/dos2unix.pod \ [ 28s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 28s] > ../es/man1/dos2unix.1 && \ [ 28s] rm -f pod*.tmp [ 28s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 29s] POD document had syntax errors at /bin/pod2man line 71. [ 29s] perl -pli.bak \ [ 29s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 29s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 29s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 29s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 29s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 29s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 29s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 29s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 29s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 29s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 29s] ../es/man1/dos2unix.1 [ 29s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 29s] + exit 0 [ 29s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.4TAXiG [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd dos2unix-6.0 [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm [ 29s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm [ 29s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm install [ 29s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 29s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin [ 29s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin [ 29s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin; ln -sf dos2unix mac2unix [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin; ln -sf unix2dos unix2mac [ 30s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/man1 [ 30s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/man1 [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 30s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/es/man1/ ; [ 30s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/es/man1/ ; [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 30s] -- install-mo [ 30s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/nl/LC_MESSAGES ; [ 30s] install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 30s] -- install-doc [ 30s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/doc/dos2unix-6.0 [ 30s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/doc/dos2unix-6.0 [ 30s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/info/dir [ 30s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm -regex '.*\.la$' [ 30s] + xargs rm -f -- [ 30s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm -regex '.*\.a$' [ 30s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 30s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm dos2unix --all-name --with-man [ 30s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/share/help/': No such file or directory [ 30s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 30s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin/dos2unix [ 30s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm/usr/bin/unix2dos [ 30s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 30s] 284 blocks [ 30s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dos2unix-6.0/dos2unix-debuginfo.manifest [ 30s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dos2unix-6.0/dos2unix-debugsource.manifest [ 30s] + /usr/lib/rpm/check-buildroot [ 30s] + /usr/lib/rpm//brp-compress [ 31s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 31s] + /usr/lib/rpm/brp-python-hardlink [ 31s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm [ 31s] Processing files: dos2unix-6.0-2.7.armv7l [ 31s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 31s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 31s] [ 31s] Provides: dos2unix = 6.0-2.7 dos2unix(armv7l-32) = 6.0-2.7 unix2dos = 6.0 [ 31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 31s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 31s] Obsoletes: unix2dos < 6.0 [ 31s] Processing files: dos2unix-debugsource-6.0-2.7.armv7l [ 31s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 31s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 31s] [ 31s] Provides: dos2unix-debugsource = 6.0-2.7 dos2unix-debugsource(armv7l-32) = 6.0-2.7 [ 31s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 31s] Processing files: dos2unix-debuginfo-6.0-2.7.armv7l [ 31s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 31s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 31s] [ 31s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 31s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 31s] [ 31s] warning: File listed twice: /usr/lib/debug/.build-id [ 31s] Provides: dos2unix-debuginfo = 6.0-2.7 dos2unix-debuginfo(armv7l-32) = 6.0-2.7 [ 31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 31s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm [ 31s] warning: Could not canonicalize hostname: obsnw01 [ 31s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-2.7.src.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-2.7.armv7l.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-2.7.armv7l.rpm [ 31s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-2.7.armv7l.rpm [ 31s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.R5akkU [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd dos2unix-6.0 [ 31s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.7.arm [ 31s] + exit 0 [ 31s] ... checking for files with abuild user/group [ 31s] ... creating baselibs [ 32s] ... comparing built packages with the former built [ 32s] /usr/lib/build/pkg-diff.sh [ 32s] compare /.build.oldpackages/dos2unix-6.0-2.6.src.rpm /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-2.7.src.rpm [ 32s] This is not a prerelease project. Compare the project name. [ 32s] comparing rpmtags [ 32s] comparing RELEASE [ 32s] comparing PROVIDES [ 32s] comparing scripts [ 32s] comparing filelist [ 32s] comparing file checksum [ 32s] RPM meta information is identical [ 32s] compare /.build.oldpackages/dos2unix-6.0-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-2.7.armv7l.rpm [ 32s] Comparing dos2unix-6.0-2.6.armv7l.rpm to dos2unix-6.0-2.7.armv7l.rpm [ 32s] This is not a prerelease project. Compare the project name. [ 32s] comparing rpmtags [ 32s] comparing RELEASE [ 32s] comparing PROVIDES [ 32s] comparing scripts [ 32s] comparing filelist [ 32s] comparing file checksum [ 32s] creating rename script [ 32s] RPM file checksum differs. [ 32s] Extracting packages [ 33s] /usr/share/man/man1/dos2unix.1 differs (troff or preprocessor input, ASCII text) [ 33s] --- old//usr/share/man/man1/dos2unix.1 2017-12-22 17:31:52.031832565 +0000 [ 33s] +++ new//usr/share/man/man1/dos2unix.1 2017-12-22 17:31:52.039832586 +0000 [ 33s] @@ -250,373 +250,4 @@ [ 33s] New file mode. Convert file \s-1INFILE\s0 and write output to file \s-1OUTFILE.\s0 [ 33s] File names must be given in pairs and wildcard names should \fInot\fR be [ 33s] used or you \fIwill\fR lose your files. [ 33s] -.IP "\fB\-o, \-\-oldfile \s-1FILE ...\s0\fR" 4 [ 33s] -.IX Item "-o, --oldfile FILE ..." [ 33s] -Old file mode. Convert file \s-1FILE\s0 and overwrite output to it. The program [ 33s] -default to run in this mode. Wildcard names may be used. [ 33s] -.IP "\fB\-q, \-\-quiet\fR" 4 [ 33s] -.IX Item "-q, --quiet" [ 33s] -Quiet mode. Suppress all warnings and messages. The return value is zero. [ 33s] -Except when wrong command-line options are used. [ 33s] -.IP "\fB\-s, \-\-safe\fR" 4 [ 33s] -.IX Item "-s, --safe" [ 33s] -Skip binary files (default). [ 33s] -.IP "\fB\-F, \-\-follow\-symlink\fR" 4 [ 33s] -.IX Item "-F, --follow-symlink" [ 33s] -Follow symbolic links and convert the targets. [ 33s] -.IP "\fB\-R, \-\-replace\-symlink\fR" 4 [ 33s] -.IX Item "-R, --replace-symlink" [ 33s] -Replace symbolic links with converted files [ 33s] -(original target files remain unchanged). [ 33s] -.IP "\fB\-S, \-\-skip\-symlink\fR" 4 [ 33s] -.IX Item "-S, --skip-symlink" [ 33s] -Keep symbolic links and targets unchanged (default). [ 33s] -.IP "\fB\-V, \-\-version\fR" 4 [ 33s] -.IX Item "-V, --version" [ 33s] -Display version information and exit. [ 33s] -.SH "MAC MODE" [ 33s] -.IX Header "MAC MODE" [ 33s] -In normal mode line breaks are converted from \s-1DOS\s0 to Unix and vice versa. [ 33s] -Mac line breaks are not converted. [ 33s] -.PP [ 33s] -In Mac mode line breaks are converted from Mac to Unix and vice versa. \s-1DOS\s0 [ 33s] -line breaks are not changed. [ 33s] -.PP [ 33s] -To run in Mac mode use the command-line option \f(CW\*(C`\-c mac\*(C'\fR or use the [ 33s] -commands \f(CW\*(C`mac2unix\*(C'\fR or \f(CW\*(C`unix2mac\*(C'\fR. [ 33s] -.SH "CONVERSION MODES" [ 33s] -.IX Header "CONVERSION MODES" [ 33s] -Conversion modes \fIascii\fR, \fI7bit\fR, and \fIiso\fR [ 33s] -are similar to those of dos2unix/unix2dos under SunOS/Solaris. [ 33s] -.IP "\fBascii\fR" 4 [ 33s] -.IX Item "ascii" [ 33s] -In mode \f(CW\*(C`ascii\*(C'\fR only line breaks are converted. This is the default [ 33s] -conversion mode. [ 33s] -.Sp [ 33s] -Although the name of this mode is \s-1ASCII,\s0 which is a 7 bit standard, the [ 33s] -actual mode is 8 bit. Use always this mode when converting Unicode \s-1UTF\-8\s0 [ 33s] -files. [ 33s] -.IP "\fB7bit\fR" 4 [ 33s] -.IX Item "7bit" [ 33s] -In this mode all 8 bit non-ASCII characters (with values from 128 to 255) [ 33s] -are converted to a 7 bit space. [ 33s] -.IP "\fBiso\fR" 4 [ 33s] -.IX Item "iso" [ 33s] -Characters are converted between a \s-1DOS\s0 character set (code page) and \s-1ISO\s0 [ 33s] -character set \s-1ISO\-8859\-1 \s0(Latin\-1) on Unix. \s-1DOS\s0 characters without \s-1ISO\-8859\-1\s0 [ 33s] -equivalent, for which conversion is not possible, are converted to a dot. The [ 33s] -same counts for \s-1ISO\-8859\-1\s0 characters without \s-1DOS\s0 counterpart. [ 33s] -.Sp [ 33s] -When only option \f(CW\*(C`\-iso\*(C'\fR is used dos2unix will try to determine the active code [ 33s] -page. When this is not possible dos2unix will use default code page \s-1CP437,\s0 [ 33s] -which is mainly used in the \s-1USA. \s0 To force a specific code page use options [ 33s] -\&\f(CW\*(C`\-437\*(C'\fR (\s-1US\s0), \f(CW\*(C`\-850\*(C'\fR (Western European), \f(CW\*(C`\-860\*(C'\fR (Portuguese), \f(CW\*(C`\-863\*(C'\fR (French [ 33s] -Canadian), or \f(CW\*(C`\-865\*(C'\fR (Nordic). Windows code page \s-1CP1252 \s0(Western European) is [ 33s] -also supported with option \f(CW\*(C`\-1252\*(C'\fR. For other code pages use dos2unix in [ 33s] -combination with \fIiconv\fR\|(1). Iconv can convert between a long list of character [ 33s] -encodings. [ 33s] -.Sp [ 33s] -Never use \s-1ISO\s0 converion on Unicode text files. It will corrupt \s-1UTF\-8\s0 encoded files. [ 33s] -.Sp [ 33s] -Some examples: [ 33s] -.Sp [ 33s] -Convert from \s-1DOS\s0 default code page to Unix Latin\-1 [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& dos2unix \-iso \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from \s-1DOS CP850\s0 to Unix Latin\-1 [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& dos2unix \-850 \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from Windows \s-1CP1252\s0 to Unix Latin\-1 [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& dos2unix \-1252 \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from Windows \s-1CP1252\s0 to Unix \s-1UTF\-8 \s0(Unicode) [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& iconv \-f CP1252 \-t UTF\-8 in.txt | dos2unix > out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from Unix Latin\-1 to \s-1DOS\s0 default code page. [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& unix2dos \-iso \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from Unix Latin\-1 to \s-1DOS CP850\s0 [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& unix2dos \-850 \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from Unix Latin\-1 to Windows \s-1CP1252\s0 [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& unix2dos \-1252 \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -Convert from Unix \s-1UTF\-8 \s0(Unicode) to Windows \s-1CP1252\s0 [ 33s] -.Sp [ 33s] -.Vb 1 [ 33s] -\& unix2dos < in.txt | iconv \-f UTF\-8 \-t CP1252 > out.txt [ 33s] -.Ve [ 33s] -.Sp [ 33s] -See also [ 33s] -and . [ 33s] -.SH "UNICODE" [ 33s] -.IX Header "UNICODE" [ 33s] -.SS "Encodings" [ 33s] -.IX Subsection "Encodings" [ 33s] -There exist different Unicode encodings. On Unix and Linux Unicode files are [ 33s] -typically encoded in \s-1UTF\-8\s0 encoding. On Windows Unicode text files can be [ 33s] -encoded in \s-1UTF\-8, UTF\-16,\s0 or \s-1UTF\-16\s0 big endian, but are mostly encoded in [ 33s] -\&\s-1UTF\-16\s0 format. [ 33s] -.SS "Conversion" [ 33s] -.IX Subsection "Conversion" [ 33s] -Unicode text files can have \s-1DOS,\s0 Unix or Mac line breaks, like regular text [ 33s] -files. [ 33s] -.PP [ 33s] -All versions of dos2unix and unix2dos can convert \s-1UTF\-8\s0 encoded files, because [ 33s] -\&\s-1UTF\-8\s0 was designed for backward compatiblity with \s-1ASCII.\s0 [ 33s] -.PP [ 33s] -Dos2unix and unix2dos with Unicode \s-1UTF\-16\s0 support, can read little and big [ 33s] -endian \s-1UTF\-16\s0 encoded text files. To see if dos2unix was built with \s-1UTF\-16\s0 [ 33s] -support type \f(CW\*(C`dos2unix \-V\*(C'\fR. [ 33s] -.PP [ 33s] -The Windows versions of dos2unix and unix2dos convert \s-1UTF\-16\s0 encoded files [ 33s] -always to \s-1UTF\-8\s0 encoded files. Unix versions of dos2unix/unix2dos convert [ 33s] -\&\s-1UTF\-16\s0 encoded files to the locale character encoding when it is set to \s-1UTF\-8.\s0 [ 33s] -Use the \fIlocale\fR\|(1) command to find out what the locale character encoding is. [ 33s] -.PP [ 33s] -Because \s-1UTF\-8\s0 formatted text files are well supported on both Windows and Unix, [ 33s] -dos2unix and unix2dos have no option to write \s-1UTF\-16\s0 files. All \s-1UTF\-16\s0 [ 33s] -characters can be encoded in \s-1UTF\-8.\s0 Conversion from \s-1UTF\-16\s0 to \s-1UTF\-8\s0 is without [ 33s] -loss. \s-1UTF\-16\s0 files will be skipped on Unix when the locale character encoding [ 33s] -is not \s-1UTF\-8,\s0 to prevent accidental loss of text. When an \s-1UTF\-16\s0 to \s-1UTF\-8\s0 [ 33s] -conversion error occurs, for instance when the \s-1UTF\-16\s0 input file contains [ 33s] -an error, the file will be skipped. [ 33s] -.PP [ 33s] -\&\s-1ISO\s0 and 7\-bit mode conversion do not work on \s-1UTF\-16\s0 files. [ 33s] -.SS "Byte Order Mark" [ 33s] -.IX Subsection "Byte Order Mark" [ 33s] -On Windows Unicode text files typically have a Byte Order Mark (\s-1BOM\s0), because [ 33s] -many Windows programs (including Notepad) add BOMs by default. See also [ 33s] -. [ 33s] -.PP [ 33s] -On Unix Unicode files typically don't have a \s-1BOM.\s0 It is assumed that text files [ 33s] -are encoded in the locale character encoding. [ 33s] -.PP [ 33s] -Dos2unix can only detect if a file is in \s-1UTF\-16\s0 format if the file has a \s-1BOM.\s0 [ 33s] -When an \s-1UTF\-16\s0 file doesn't have a \s-1BOM,\s0 dos2unix will see the file as a binary [ 33s] -file. [ 33s] -.PP [ 33s] -Use dos2unix in combination with \fIiconv\fR\|(1) to convert an \s-1UTF\-16\s0 file without [ 33s] -\&\s-1BOM.\s0 [ 33s] -.PP [ 33s] -Dos2unix never writes a \s-1BOM\s0 in the output file, unless you use option \f(CW\*(C`\-m\*(C'\fR. [ 33s] -.PP [ 33s] -Unix2dos writes a \s-1BOM\s0 in the output file when the input file has a \s-1BOM,\s0 or [ 33s] -when option \f(CW\*(C`\-m\*(C'\fR is used. [ 33s] -.SS "Unicode examples" [ 33s] -.IX Subsection "Unicode examples" [ 33s] -Convert from Windows \s-1UTF\-16 \s0(with \s-1BOM\s0) to Unix \s-1UTF\-8\s0 [ 33s] -.PP [ 33s] -.Vb 1 [ 33s] -\& dos2unix \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.PP [ 33s] -Convert from Windows \s-1UTF\-16 \s0(without \s-1BOM\s0) to Unix \s-1UTF\-8\s0 [ 33s] -.PP [ 33s] -.Vb 1 [ 33s] -\& iconv \-f UTF\-16 \-t UTF\-8 in.txt | dos2unix > out.txt [ 33s] -.Ve [ 33s] -.PP [ 33s] -Convert from Unix \s-1UTF\-8\s0 to Windows \s-1UTF\-8\s0 with \s-1BOM\s0 [ 33s] -.PP [ 33s] -.Vb 1 [ 33s] -\& unix2dos \-m \-n in.txt out.txt [ 33s] -.Ve [ 33s] -.PP [ 33s] compare /.build.oldpackages/dos2unix-debuginfo-6.0-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-2.7.armv7l.rpm [ 33s] skipping -debuginfo package [ 33s] compare /.build.oldpackages/dos2unix-debugsource-6.0-2.6.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-2.7.armv7l.rpm [ 33s] Comparing dos2unix-debugsource-6.0-2.6.armv7l.rpm to dos2unix-debugsource-6.0-2.7.armv7l.rpm [ 33s] This is not a prerelease project. Compare the project name. [ 33s] comparing rpmtags [ 33s] comparing RELEASE [ 33s] comparing PROVIDES [ 33s] comparing scripts [ 33s] comparing filelist [ 33s] comparing file checksum [ 33s] creating rename script [ 33s] RPM meta information is identical [ 33s] [ 33s] obsnw01 finished "build dos2unix.spec" at Fri Dec 22 17:31:52 UTC 2017. [ 33s]