[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw02 started "build _service:gbs:kbd.spec" at Fri Nov 2 01:45:46 UTC 2018. [ 0s] [ 0s] Building kbd for project 'Tizen:5.0:Unified' repository 'emulator' arch 'i586' srcmd5 'd75a4251f610c3e7e8fd83c509d200fc' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling libncurses... [ 1s] [3/35] preinstalling setup... [ 1s] [4/35] preinstalling filesystem... [ 1s] [5/35] preinstalling glibc... [ 1s] [6/35] preinstalling bash... [ 1s] [7/35] preinstalling diffutils... [ 1s] [8/35] preinstalling grep... [ 1s] [9/35] preinstalling libattr... [ 1s] [10/35] preinstalling libbz2... [ 1s] [11/35] preinstalling libcap... [ 1s] [12/35] preinstalling libelf... [ 1s] [13/35] preinstalling libfreebl3... [ 1s] [14/35] preinstalling libgcc... [ 1s] [15/35] preinstalling liblua... [ 1s] [16/35] preinstalling liblzma... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libreadline... [ 1s] [19/35] preinstalling libsmack... [ 1s] [20/35] preinstalling libsqlite... [ 1s] [21/35] preinstalling nspr... [ 1s] [22/35] preinstalling sed... [ 1s] [23/35] preinstalling zlib... [ 1s] [24/35] preinstalling coreutils... [ 1s] [25/35] preinstalling libacl... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling util-linux... [ 2s] [31/35] preinstalling tar... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] running setup postinstall script [ 2s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 2s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 2s] initializing rpm db... [ 2s] reordering...cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 2s] [1/101] installing libmagic-data-5.32-3.56 [ 2s] [2/101] installing setup-0.9-3.1 [ 2s] [3/101] installing filesystem-3.1-3.1 [ 2s] [4/101] installing glibc-2.24-3.15 [ 3s] [5/101] installing bash-3.2.57-3.1 [ 3s] [6/101] installing binutils-2.27-3.18 [ 3s] [7/101] installing cpio-2.11-3.1 [ 3s] [8/101] installing diffutils-3.3-3.1 [ 3s] [9/101] installing fdupes-1.40-3.66 [ 3s] [10/101] installing findutils-4.3.8-3.60 [ 3s] [11/101] installing hostname-3.20-3.1 [ 3s] [12/101] installing libatomic-6.2.1-3.1 [ 3s] [13/101] installing libattr-2.4.47-3.68 [ 3s] [14/101] installing libbz2-1.0.6-3.61 [ 3s] [15/101] installing libcap-2.24-3.66 [ 3s] [16/101] installing libelf-0.153-3.7 [ 3s] [17/101] installing libext2fs-1.43.4-3.1 [ 3s] [18/101] installing libfreebl3-3.34.1-3.29 [ 3s] [19/101] installing libgcc-6.2.1-3.1 [ 3s] [20/101] installing libgomp-6.2.1-3.1 [ 3s] [21/101] installing libitm-6.2.1-3.1 [ 4s] [22/101] installing libltdl-2.4.2-3.42 [ 4s] [23/101] installing liblua-5.1.5-3.2 [ 4s] [24/101] installing liblzma-5.2.3-3.46 [ 4s] [25/101] installing libpcre-8.41-3.1 [ 4s] [26/101] installing libpopt-1.16-3.2 [ 4s] [27/101] installing libquadmath-6.2.1-3.1 [ 4s] [28/101] installing libsmack-1.3.1-3.62 [ 4s] [29/101] installing libsmartcols-2.30-3.1 [ 4s] [30/101] installing libsqlite-3.24.0-3.23 [ 4s] [31/101] installing libuuid-2.30-3.1 [ 4s] [32/101] installing m4-1.4.17-3.1 [ 4s] [33/101] installing net-tools-2.0_20121208git-3.1 [ 4s] [34/101] installing nspr-4.12-3.2 [ 4s] [35/101] installing patch-2.7-3.2 [ 4s] [36/101] installing pkg-config-0.28-3.59 [ 4s] [37/101] installing sed-4.1c-3.1 [ 4s] [38/101] installing update-alternatives-1.18.15-3.1 [ 4s] [39/101] installing which-2.20-3.1 [ 4s] [40/101] installing zlib-1.2.11-3.64 [ 4s] [41/101] installing build-compare-2015.04.28-3.14 [ 4s] [42/101] installing terminfo-base-full-6.1-3.43 [ 4s] [43/101] installing check-0.12.0-3.1 [ 4s] [44/101] installing coreutils-6.9-3.1 [ 5s] [45/101] installing cpp-6.2.1-3.1 [ 5s] [46/101] installing flex-2.6.4-3.5 [ 6s] [47/101] installing gawk-3.1.5-3.1 [ 6s] [48/101] installing gcc-c++-6.2.1-3.1 [ 7s] [49/101] installing grep-2.5.2-3.1 [ 7s] [50/101] installing libacl-2.2.52-3.68 [ 7s] [51/101] installing libasm-0.153-3.7 [ 7s] [52/101] installing libblkid-2.30-3.1 [ 7s] [53/101] installing libstdc++-6.2.1-3.1 [ 7s] [54/101] installing make-4.0-3.5 [ 7s] [55/101] installing nss-certs-3.34.1-3.29 [ 7s] [56/101] installing smack-1.3.1-3.62 [ 7s] [57/101] installing bison-3.0.5-3.11 [ 7s] [58/101] installing bzip2-1.0.6-3.61 [ 7s] [59/101] installing libmagic-5.32-3.56 [ 7s] [60/101] installing libxml2-2.9.7-3.22 [ 7s] [61/101] installing xz-5.2.3-3.46 [ 7s] [62/101] installing libgfortran-6.2.1-3.1 [ 7s] [63/101] installing libdw-0.153-3.7 [ 7s] [64/101] installing libstdc++-devel-6.2.1-3.1 [ 8s] [65/101] installing file-5.32-3.56 [ 8s] [66/101] installing libmount-2.30-3.1 [ 8s] [67/101] installing linux-glibc-devel-3.10-3.66 [ 8s] [68/101] installing tar-1.17-3.1 [ 8s] [69/101] installing db4-4.8.30.NC-3.55 [ 8s] [70/101] installing gettext-runtime-0.19.8.1-3.14 [ 8s] [71/101] installing glibc-locale-2.24-3.15 [ 8s] [72/101] installing gzip-1.3.12-3.65 [ 8s] [73/101] installing libcc1-6.2.1-3.1 [ 8s] [74/101] installing libcilkrts-6.2.1-3.1 [ 9s] [75/101] installing libfdisk-2.30-3.1 [ 9s] [76/101] installing libubsan-6.2.1-3.1 [ 9s] [77/101] installing pam-1.1.6-3.1 [ 9s] [78/101] installing libncurses6-6.1-3.43 [ 9s] [79/101] installing tzdata-2018c-2.1 [ 9s] [80/101] installing elfutils-0.153-3.7 [ 9s] [81/101] installing libncurses-6.1-3.43 [ 9s] [82/101] installing glibc-devel-2.24-3.15 [ 9s] [83/101] installing less-466-3.1 [ 9s] [84/101] installing libreadline-5.2-3.22 [ 9s] [85/101] installing pam-devel-1.1.6-3.1 [ 9s] [86/101] installing procps-ng-3.3.15-3.1 [ 9s] [87/101] installing gettext-tools-0.19.8.1-3.14 [ 10s] [88/101] installing perl-5.20.0-3.11 [ 11s] [89/101] installing gcc-6.2.1-3.1 [ 12s] [90/101] installing build-mkbaselibs-20120927-3.1 [ 12s] [91/101] installing autoconf-2.69-3.27 [ 12s] [92/101] installing check-devel-0.12.0-3.1 [ 12s] [93/101] installing util-linux-2.30-3.1 [ 13s] [94/101] installing automake-1.15.1-3.34 [ 13s] [95/101] installing util-linux-su-2.30-3.1 [ 13s] [96/101] installing build-20120927-3.1 [ 13s] [97/101] installing libtool-2.4.2-3.42 [ 13s] [98/101] installing nss-3.34.1-3.29 [ 13s] [99/101] installing libsoftokn3-3.34.1-3.29 [ 13s] [100/101] installing rpm-4.11.0.1-3.29 [ 13s] [101/101] installing rpm-build-4.11.0.1-3.29 [ 13s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 13s] now finalizing build dir... [ 14s] build target is i686-tizen-linux [ 14s] ----------------------------------------------------------------- [ 14s] I have the following modifications for kbd.spec: [ 14s] 8c8 [ 14s] < Release: 0 [ 14s] --- [ 14s] > Release: 3.1 [ 14s] 27c27 [ 14s] < BuildRequires: gettext [ 14s] --- [ 14s] > BuildRequires: gettext-tools [ 14s] 126a127 [ 14s] > %changelog [ 14s] ----------------------------------------------------------------- [ 14s] ----- building kbd.spec (user abuild) [ 14s] ----------------------------------------------------------------- [ 14s] ----------------------------------------------------------------- [ 14s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.0:Unified/emulator/d75a4251f610c3e7e8fd83c509d200fc-kbd' -ba /home/abuild/rpmbuild/SOURCES/kbd.spec [ 14s] Building target platforms: i686-tizen-linux [ 14s] Building for target i686-tizen-linux [ 14s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.i9DxJt [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + rm -rf kbd-2.0.4 [ 14s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-2.0.4.tar.bz2 [ 14s] + /bin/tar -xf - [ 14s] + STATUS=0 [ 14s] + '[' 0 -ne 0 ']' [ 14s] + cd kbd-2.0.4 [ 14s] + /bin/tar -xf - [ 14s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latsun-fonts.tar.bz2 [ 14s] + STATUS=0 [ 14s] + '[' 0 -ne 0 ']' [ 14s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latarcyrheb-16-fixed.tar.bz2 [ 14s] + /bin/tar -xf - [ 14s] + STATUS=0 [ 14s] + '[' 0 -ne 0 ']' [ 14s] + /bin/tar -xf - [ 14s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/fr-dvorak.tar.bz2 [ 14s] + STATUS=0 [ 14s] + '[' 0 -ne 0 ']' [ 14s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latarcyrheb-32.tar.bz2 [ 14s] + /bin/tar -xf - [ 14s] + STATUS=0 [ 14s] + '[' 0 -ne 0 ']' [ 14s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 14s] + echo 'Patch #0 (67c099c-to-d2a066e.diff):' [ 14s] Patch #0 (67c099c-to-d2a066e.diff): [ 14s] + /bin/cat /home/abuild/rpmbuild/SOURCES/67c099c-to-d2a066e.diff [ 14s] + /bin/patch -p1 --fuzz=2 [ 14s] patching file docs/man/man1/dumpkeys.1.in [ 14s] patching file docs/man/man1/showkey.1 [ 14s] patching file docs/man/man8/setkeycodes.8 [ 14s] patching file po/es.po [ 14s] patching file src/unicode_start [ 14s] + echo 'Patch #1 (0002-Bump-to-kbd-2.0.4.patch):' [ 14s] Patch #1 (0002-Bump-to-kbd-2.0.4.patch): [ 14s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Bump-to-kbd-2.0.4.patch [ 14s] + /bin/patch -p1 --fuzz=2 [ 14s] patching file docs/man/man1/dumpkeys.1.in [ 14s] patching file docs/man/man1/showkey.1 [ 14s] patching file docs/man/man8/setkeycodes.8 [ 14s] patching file po/es.po [ 14s] patching file src/unicode_start [ 14s] + cp /home/abuild/rpmbuild/SOURCES/kbd.manifest . [ 14s] + pushd data/keymaps/i386 [ 14s] ~/rpmbuild/BUILD/kbd-2.0.4/data/keymaps/i386 ~/rpmbuild/BUILD/kbd-2.0.4 [ 14s] + mv qwerty/fi.map qwerty/fi-old.map [ 14s] + cp qwerty/pt-latin9.map qwerty/pt.map [ 14s] + cp qwerty/sv-latin1.map qwerty/se-latin1.map [ 14s] + mv azerty/fr.map azerty/fr-old.map [ 14s] + cp azerty/fr-latin9.map azerty/fr.map [ 14s] + cp azerty/fr-latin9.map azerty/fr-latin0.map [ 14s] + mv dvorak/no.map dvorak/no-dvorak.map [ 14s] + mv fgGIod/trf.map fgGIod/trf-fgGIod.map [ 14s] + mv olpc/es.map olpc/es-olpc.map [ 14s] + mv olpc/pt.map olpc/pt-olpc.map [ 14s] + mv qwerty/cz.map qwerty/cz-qwerty.map [ 14s] + popd [ 14s] ~/rpmbuild/BUILD/kbd-2.0.4 [ 14s] + pushd po [ 14s] ~/rpmbuild/BUILD/kbd-2.0.4/po ~/rpmbuild/BUILD/kbd-2.0.4 [ 14s] + rm -f gr.po gr.gmo [ 14s] + popd [ 14s] ~/rpmbuild/BUILD/kbd-2.0.4 [ 14s] + exit 0 [ 14s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.7fHK8x [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd kbd-2.0.4 [ 14s] ++ uname -m [ 14s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 14s] + LANG=C [ 14s] + export LANG [ 14s] + unset DISPLAY [ 14s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 14s] + export CFLAGS [ 14s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11' [ 14s] + export CXXFLAGS [ 14s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 14s] + export FFLAGS [ 14s] + LDFLAGS= [ 14s] + export LDFLAGS [ 14s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 14s] + export CFLAGS [ 14s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11' [ 14s] + export CXXFLAGS [ 14s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 14s] + export FFLAGS [ 14s] + autoreconf -v --install --force [ 14s] autoreconf: Entering directory `.' [ 14s] autoreconf: running: autopoint --force [ 15s] Copying file config/mkinstalldirs [ 15s] Copying file po/Makefile.in.in [ 15s] Copying file po/Makevars.template [ 15s] Copying file po/Rules-quot [ 15s] Copying file po/boldquot.sed [ 15s] Copying file po/en@boldquot.header [ 15s] Copying file po/en@quot.header [ 15s] Copying file po/insert-header.sin [ 15s] Copying file po/quot.sed [ 15s] Copying file po/remove-potcdate.sin [ 16s] autoreconf: running: aclocal --force -I m4 [ 18s] autoreconf: configure.ac: tracing [ 18s] autoreconf: running: libtoolize --copy --force [ 18s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. [ 18s] libtoolize: copying file `config/ltmain.sh' [ 18s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 18s] libtoolize: copying file `m4/libtool.m4' [ 18s] libtoolize: copying file `m4/ltoptions.m4' [ 18s] libtoolize: copying file `m4/ltsugar.m4' [ 18s] libtoolize: copying file `m4/ltversion.m4' [ 18s] libtoolize: copying file `m4/lt~obsolete.m4' [ 20s] autoreconf: running: /usr/bin/autoconf --force [ 21s] autoreconf: running: /usr/bin/autoheader --force [ 21s] autoreconf: running: automake --add-missing --copy --force-missing [ 22s] configure.ac:44: installing 'config/ar-lib' [ 22s] configure.ac:41: installing 'config/config.guess' [ 22s] configure.ac:41: installing 'config/config.sub' [ 22s] configure.ac:10: installing 'config/install-sh' [ 22s] configure.ac:10: installing 'config/missing' [ 22s] src/Makefile.am: installing 'config/depcomp' [ 22s] src/vlock/Makefile.am:9: warning: source file '../kbd_error.c' is in a subdirectory, [ 22s] src/vlock/Makefile.am:9: but option 'subdir-objects' is disabled [ 22s] automake: warning: possible forward-incompatibility. [ 22s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 22s] automake: automake option hasn't been enabled. For now, the corresponding output [ 22s] automake: object file(s) will be placed in the top-level directory. However, [ 22s] automake: this behaviour will change in future Automake versions: they will [ 22s] automake: unconditionally cause object files to be placed in the same subdirectory [ 22s] automake: of the corresponding sources. [ 22s] automake: You are advised to start using 'subdir-objects' option throughout your [ 22s] automake: project, to avoid future incompatibilities. [ 22s] parallel-tests: installing 'config/test-driver' [ 22s] autoreconf: Leaving directory `.' [ 22s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --datadir=/usr/lib/kbd --mandir=/usr/share/man --localedir=/usr/share/locale --disable-nls [ 22s] checking for a BSD-compatible install... /bin/install -c [ 22s] checking whether build environment is sane... yes [ 22s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 22s] checking for gawk... gawk [ 22s] checking whether make sets $(MAKE)... yes [ 22s] checking whether make supports nested variables... yes [ 22s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 22s] checking pkg-config is at least version 0.9.0... yes [ 22s] checking for CHECK... yes [ 22s] checking whether make supports nested variables... (cached) yes [ 22s] checking for i686-tizen-linux-gnu-gcc... no [ 22s] checking for gcc... gcc [ 22s] checking whether the C compiler works... yes [ 22s] checking for C compiler default output file name... a.out [ 22s] checking for suffix of executables... [ 22s] checking whether we are cross compiling... no [ 22s] checking for suffix of object files... o [ 22s] checking whether we are using the GNU C compiler... yes [ 22s] checking whether gcc accepts -g... yes [ 22s] checking for gcc option to accept ISO C89... none needed [ 22s] checking whether gcc understands -c and -o together... yes [ 22s] checking for style of include used by make... GNU [ 22s] checking dependency style of gcc... gcc3 [ 22s] checking for bison... bison -y [ 22s] checking for flex... flex [ 22s] checking lex output file root... lex.yy [ 23s] checking lex library... -lfl [ 23s] checking whether yytext is a pointer... yes [ 23s] checking for a sed that does not truncate output... /bin/sed [ 23s] checking whether ln -s works... yes [ 23s] checking whether make sets $(MAKE)... (cached) yes [ 23s] checking build system type... i686-tizen-linux-gnu [ 23s] checking host system type... i686-tizen-linux-gnu [ 23s] checking for i686-tizen-linux-gnu-ar... no [ 23s] checking for i686-tizen-linux-gnu-lib... no [ 23s] checking for i686-tizen-linux-gnu-link... no [ 23s] checking for ar... ar [ 23s] checking the archiver (ar) interface... ar [ 23s] checking how to print strings... printf [ 23s] checking for a sed that does not truncate output... (cached) /bin/sed [ 23s] checking for grep that handles long lines and -e... /bin/grep [ 23s] checking for egrep... /bin/grep -E [ 23s] checking for fgrep... /bin/grep -F [ 23s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 23s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 23s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 23s] checking the name lister (/bin/nm -B) interface... BSD nm [ 23s] checking the maximum length of command line arguments... 1572864 [ 23s] checking whether the shell understands some XSI constructs... yes [ 23s] checking whether the shell understands "+="... yes [ 23s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 23s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 23s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 23s] checking for i686-tizen-linux-gnu-objdump... no [ 23s] checking for objdump... objdump [ 23s] checking how to recognize dependent libraries... pass_all [ 23s] checking for i686-tizen-linux-gnu-dlltool... no [ 23s] checking for dlltool... no [ 23s] checking how to associate runtime and link libraries... printf %s\n [ 23s] checking for i686-tizen-linux-gnu-ar... ar [ 23s] checking for archiver @FILE support... @ [ 23s] checking for i686-tizen-linux-gnu-strip... no [ 23s] checking for strip... strip [ 23s] checking for i686-tizen-linux-gnu-ranlib... no [ 23s] checking for ranlib... ranlib [ 23s] checking command to parse /bin/nm -B output from gcc object... ok [ 23s] checking for sysroot... no [ 23s] checking for i686-tizen-linux-gnu-mt... no [ 23s] checking for mt... no [ 23s] checking if : is a manifest tool... no [ 23s] checking how to run the C preprocessor... gcc -E [ 24s] checking for ANSI C header files... yes [ 24s] checking for sys/types.h... yes [ 24s] checking for sys/stat.h... yes [ 24s] checking for stdlib.h... yes [ 24s] checking for string.h... yes [ 24s] checking for memory.h... yes [ 24s] checking for strings.h... yes [ 24s] checking for inttypes.h... yes [ 24s] checking for stdint.h... yes [ 24s] checking for unistd.h... yes [ 24s] checking for dlfcn.h... yes [ 24s] checking for objdir... .libs [ 24s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 24s] checking for gcc option to produce PIC... -fPIC -DPIC [ 24s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 24s] checking if gcc static flag -static works... no [ 24s] checking if gcc supports -c -o file.o... yes [ 24s] checking if gcc supports -c -o file.o... (cached) yes [ 24s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 24s] checking whether -lc should be explicitly linked in... no [ 24s] checking dynamic linker characteristics... GNU/Linux ld.so [ 24s] checking how to hardcode library paths into programs... immediate [ 24s] checking whether stripping libraries is possible... yes [ 24s] checking if libtool supports shared libraries... yes [ 24s] checking whether to build shared libraries... yes [ 24s] checking whether to build static libraries... yes [ 24s] checking whether NLS is requested... no [ 24s] checking for msgfmt... /bin/msgfmt [ 24s] checking for gmsgfmt... /bin/msgfmt [ 24s] checking for xgettext... /bin/xgettext [ 24s] checking for msgmerge... /bin/msgmerge [ 24s] checking for ld used by GCC... /usr/i586-tizen-linux-gnu/bin/ld [ 24s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 24s] checking for shared library run path origin... done [ 24s] checking whether NLS is requested... no [ 24s] checking whether to use NLS... no [ 24s] checking for dirent.h that defines DIR... yes [ 24s] checking for library containing opendir... none required [ 24s] checking for ANSI C header files... (cached) yes [ 24s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 24s] checking fcntl.h usability... yes [ 24s] checking fcntl.h presence... yes [ 24s] checking for fcntl.h... yes [ 24s] checking libintl.h usability... yes [ 24s] checking libintl.h presence... yes [ 24s] checking for libintl.h... yes [ 24s] checking locale.h usability... yes [ 24s] checking locale.h presence... yes [ 24s] checking for locale.h... yes [ 24s] checking for memory.h... (cached) yes [ 24s] checking for stdlib.h... (cached) yes [ 24s] checking for string.h... (cached) yes [ 24s] checking sys/file.h usability... yes [ 24s] checking sys/file.h presence... yes [ 24s] checking for sys/file.h... yes [ 24s] checking sys/ioctl.h usability... yes [ 24s] checking sys/ioctl.h presence... yes [ 24s] checking for sys/ioctl.h... yes [ 24s] checking termios.h usability... yes [ 24s] checking termios.h presence... yes [ 24s] checking for termios.h... yes [ 24s] checking for unistd.h... (cached) yes [ 24s] checking for an ANSI C-conforming const... yes [ 24s] checking for inline... inline [ 25s] checking for size_t... yes [ 25s] checking whether struct tm is in sys/time.h or time.h... time.h [ 25s] checking for uid_t in sys/types.h... yes [ 25s] checking for unistd.h... (cached) yes [ 25s] checking for working chown... yes [ 25s] checking whether closedir returns void... no [ 25s] checking for pid_t... yes [ 25s] checking vfork.h usability... no [ 25s] checking vfork.h presence... no [ 25s] checking for vfork.h... no [ 25s] checking for fork... yes [ 25s] checking for vfork... yes [ 25s] checking for working fork... yes [ 25s] checking for working vfork... (cached) yes [ 25s] checking whether gcc needs -traditional... no [ 25s] checking return type of signal handlers... void [ 25s] checking whether lstat correctly handles trailing slash... yes [ 25s] checking whether stat accepts an empty string... no [ 26s] checking for alarm... yes [ 26s] checking for memset... yes [ 26s] checking for setlocale... yes [ 26s] checking for strcasecmp... yes [ 26s] checking for strchr... yes [ 26s] checking for strdup... yes [ 26s] checking for strerror... yes [ 26s] checking for strspn... yes [ 26s] checking for strstr... yes [ 26s] checking for strtol... yes [ 26s] checking for strtoul... yes [ 26s] checking for setpgrp... yes [ 26s] checking for malloc... yes [ 26s] checking for realloc... yes [ 26s] checking if gcc supports -Wall flag... yes [ 26s] checking if gcc supports -Wextra flag... yes [ 26s] checking if gcc supports -Wmissing-noreturn flag... yes [ 26s] checking if gcc supports -Wdisabled-optimization flag... yes [ 26s] checking if gcc supports -Wcast-align flag... yes [ 26s] checking if gcc supports -Wshadow flag... yes [ 26s] checking if gcc supports -Wmissing-format-attribute flag... yes [ 26s] checking if gcc supports -Wmissing-prototypes flag... yes [ 26s] checking if gcc supports -Wstrict-prototypes flag... yes [ 26s] checking if gcc supports -Wmissing-declarations flag... yes [ 26s] checking for pam_start in -lpam... yes [ 26s] checking security/pam_appl.h usability... yes [ 26s] checking security/pam_appl.h presence... yes [ 26s] checking for security/pam_appl.h... yes [ 26s] checking for misc_conv in -lpam_misc... yes [ 26s] checking security/pam_misc.h usability... yes [ 26s] checking security/pam_misc.h presence... yes [ 26s] checking for security/pam_misc.h... yes [ 26s] checking for doxygen... no [ 26s] checking that generated files are newer than configure... done [ 26s] configure: creating ./config.status [ 27s] config.status: creating Makefile [ 27s] config.status: creating data/Makefile [ 27s] config.status: creating docs/Makefile [ 27s] config.status: creating docs/man/Makefile [ 27s] config.status: creating docs/man/man1/Makefile [ 27s] config.status: creating docs/man/man1/dumpkeys.1 [ 27s] config.status: creating docs/man/man1/loadkeys.1 [ 27s] config.status: creating docs/man/man1misc/Makefile [ 27s] config.status: creating docs/man/man5/Makefile [ 27s] config.status: creating docs/man/man8/Makefile [ 27s] config.status: creating docs/man/man8/loadunimap.8 [ 27s] config.status: creating docs/man/man8/mapscrn.8 [ 27s] config.status: creating docs/man/man8/setfont.8 [ 27s] config.status: creating docs/man/man8misc/Makefile [ 27s] config.status: creating docs/reference/Makefile [ 27s] config.status: creating docs/reference/libkeymap/Makefile [ 27s] config.status: creating po/Makefile.in [ 27s] config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting [ 27s] config.status: creating src/Makefile [ 27s] config.status: creating src/libkeymap/Makefile [ 27s] config.status: creating src/vlock/Makefile [ 27s] config.status: creating tests/Makefile [ 27s] config.status: creating config.h [ 27s] config.status: executing depfiles commands [ 27s] config.status: executing libtool commands [ 27s] config.status: executing default-1 commands [ 27s] config.status: creating po/POTFILES [ 27s] config.status: creating po/Makefile [ 27s] [ 27s] kbd 2.0.4 [ 27s] ====== [ 27s] [ 27s] prefix: /usr [ 27s] libdir: /usr/lib [ 27s] bindir: /usr/bin [ 27s] datadir: /usr/lib/kbd [ 27s] [ 27s] compiler: gcc [ 27s] cflags: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wall -Wextra -Wmissing-noreturn -Wdisabled-optimization -Wcast-align -Wshadow -Wmissing-format-attribute -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations [ 27s] [ 27s] {get,set}keycodes: yes [ 27s] resizecons: yes [ 27s] optional progs: no [ 27s] vlock: yes [ 27s] libkeymap: no [ 27s] [ 27s] + /bin/make -j4 [ 27s] /bin/make all-recursive [ 27s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 27s] Making all in src [ 27s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 27s] Making all in vlock [ 27s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 27s] CC kbd_error.o [ 27s] CC auth.o [ 27s] CC pam.o [ 27s] CC parse.o [ 27s] CC screen.o [ 27s] CC username.o [ 27s] CC vlock.o [ 27s] CC vt.o [ 27s] CCLD vlock [ 27s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 27s] Making all in libkeymap [ 27s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 27s] ../../contrib/gen_charset_syms.pl -n latin1_syms -s 160 <../../data/consoletrans/8859-1_to_uni.trans >./syms.latin1.h [ 27s] ../../contrib/gen_charset_syms.pl -n latin2_syms -s 160 <../../data/consoletrans/8859-2_to_uni.trans >./syms.latin2.h [ 27s] YACC parser.c [ 27s] LEX analyze.c [ 27s] ../../contrib/gen_charset_syms.pl -n latin3_syms -s 160 <../../data/consoletrans/8859-3_to_uni.trans >./syms.latin3.h [ 27s] ../../contrib/gen_charset_syms.pl -n latin4_syms -s 160 <../../data/consoletrans/8859-4_to_uni.trans >./syms.latin4.h [ 27s] ../../contrib/gen_charset_syms.pl -n iso8859_5_syms -s 160 <../../data/consoletrans/8859-5_to_uni.trans >./syms.iso8859_5.h [ 27s] ../../contrib/gen_charset_syms.pl -n iso8859_7_syms -s 160 <../../data/consoletrans/8859-7_to_uni.trans >./syms.iso8859_7.h [ 27s] ../../contrib/gen_charset_syms.pl -n iso8859_8_syms -s 160 <../../data/consoletrans/8859-8_to_uni.trans >./syms.iso8859_8.h [ 27s] ../../contrib/gen_charset_syms.pl -n iso8859_9_syms -s 160 <../../data/consoletrans/8859-9_to_uni.trans >./syms.iso8859_9.h [ 27s] ../../contrib/gen_charset_syms.pl -n iso8859_15_syms -s 160 <../../data/consoletrans/8859-15_to_uni.trans >./syms.iso8859_15.h [ 27s] ../../contrib/gen_charset_syms.pl -n cp1250_syms -s 128 <../../data/consoletrans/cp1250_to_uni.trans >./syms.cp1250.h [ 27s] ../../contrib/gen_charset_syms.pl -n koi8_syms -s 128 <../../data/consoletrans/koi8-u_to_uni.trans >./syms.koi8.h [ 27s] updating parser.h [ 27s] /bin/make all-am [ 27s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 27s] CC array.lo [ 27s] CC findfile.lo [ 27s] CC common.lo [ 27s] CC kernel.lo [ 28s] common.c: In function 'lk_init': [ 28s] common.c:166:21: warning: argument 2 of 'lk_set_log_fn' might be a candidate for a format attribute [-Wsuggest-attribute=format] [ 28s] lk_set_log_fn(ctx, log_file, stderr); [ 28s] ^~~~~~~~ [ 28s] CC dump.lo [ 28s] CC kmap.lo [ 28s] CC diacr.lo [ 28s] CC func.lo [ 28s] CC summary.lo [ 28s] CC loadkeys.lo [ 28s] CC parser.lo [ 28s] CC analyze.lo [ 28s] CC modifiers.lo [ 28s] CC ksyms.lo [ 29s] CCLD libkeymap.la [ 29s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 29s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 29s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 29s] CC getfd.o [ 29s] CC xmalloc.o [ 29s] CC kbd_error.o [ 29s] CC psffontop.o [ 29s] CC utf8.o [ 29s] CC kdmapop.o [ 29s] CC loadunimap.o [ 29s] CC kdfontop.o [ 29s] CC mapscrn-mapscrn.o [ 29s] CC loadunimap-loadunimap.o [ 29s] CC dumpkeys.o [ 29s] CC loadkeys.o [ 29s] CC showkey.o [ 29s] CC setfont.o [ 29s] CC mapscrn.o [ 29s] CC showconsolefont.o [ 29s] CC setleds.o [ 29s] CC setmetamode.o [ 29s] CC kbd_mode.o [ 29s] CC psfxtable.o [ 29s] CC fgconsole.o [ 29s] CC kbdrate.o [ 29s] CC chvt.o [ 29s] CC deallocvt.o [ 29s] CC openvt.o [ 29s] CC kbdinfo.o [ 29s] openvt.c: In function 'main': [ 29s] openvt.c:213:5: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 29s] (void)setuid(getuid()); [ 29s] ^~~~~~~~~~~~~~~~~~~~~~ [ 29s] openvt.c:355:4: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 29s] setuid(uid); [ 29s] ^~~~~~~~~~~ [ 29s] CC setvtrgb.o [ 30s] CC getkeycodes.o [ 30s] CC setkeycodes.o [ 30s] CC resizecons.o [ 30s] AR libcommon.a [ 30s] AR libfont.a [ 30s] CCLD mapscrn [ 30s] CCLD loadunimap [ 30s] CCLD dumpkeys [ 30s] CCLD loadkeys [ 30s] CCLD showkey [ 30s] CCLD setfont [ 30s] CCLD showconsolefont [ 30s] CCLD setleds [ 30s] CCLD setmetamode [ 30s] CCLD kbd_mode [ 30s] CCLD psfxtable [ 30s] CCLD fgconsole [ 30s] CCLD kbdrate [ 30s] CCLD chvt [ 30s] CCLD deallocvt [ 30s] CCLD openvt [ 30s] CCLD kbdinfo [ 30s] CCLD setvtrgb [ 30s] CCLD getkeycodes [ 30s] CCLD setkeycodes [ 30s] CCLD resizecons [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 30s] Making all in data [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 30s] make[2]: Nothing to be done for 'all'. [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 30s] Making all in po [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 30s] make[2]: Nothing to be done for 'all'. [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 30s] Making all in docs [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 30s] Making all in man [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 30s] Making all in man1 [ 30s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 30s] make[4]: Nothing to be done for 'all'. [ 30s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 30s] Making all in man5 [ 30s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 30s] make[4]: Nothing to be done for 'all'. [ 30s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 30s] Making all in man8 [ 30s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 30s] make[4]: Nothing to be done for 'all'. [ 30s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 30s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 30s] make[4]: Nothing to be done for 'all-am'. [ 30s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 30s] Making all in reference [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 30s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 30s] make[4]: Nothing to be done for 'all-am'. [ 30s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 30s] make[3]: Nothing to be done for 'all-am'. [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 30s] Making all in tests [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 30s] CC libkeymap-dumpkeys.o [ 30s] CC libkeymap-mktable.o [ 30s] CC libkeymap-bkeymap.o [ 30s] CC libkeymap-showmaps.o [ 30s] libkeymap-showmaps.c: In function 'main': [ 30s] libkeymap-showmaps.c:22:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] [ 30s] for (i = 0; i < ctx->keymap->total; i++) { [ 30s] ^ [ 30s] libkeymap-showmaps.c:8:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 30s] int main(int argc, char **argv) [ 30s] ^~~~ [ 30s] libkeymap-mktable.c: In function 'main': [ 30s] libkeymap-bkeymap.c: In function 'main': [ 30s] libkeymap-mktable.c:6:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 30s] int main(int argc, char **argv) [ 30s] ^~~~ [ 30s] libkeymap-bkeymap.c:6:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 30s] int main(int argc, char **argv) [ 30s] ^~~~ [ 30s] CC libkeymap-init.o [ 30s] CC libkeymap-kmap.o [ 30s] CC libkeymap-keys.o [ 30s] CC libkeymap-parse.o [ 30s] CC libkeymap-charset.o [ 30s] CCLD libkeymap-dumpkeys [ 30s] libkeymap-charset.c: In function 'test0': [ 30s] libkeymap-charset.c:21:4: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 30s] s = lk_get_charset(ctx); [ 30s] ^ [ 30s] libkeymap-charset.c: In function 'test1': [ 30s] libkeymap-charset.c:44:4: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 30s] s = lk_get_charset(ctx); [ 30s] ^ [ 30s] CCLD libkeymap-mktable [ 30s] CCLD libkeymap-bkeymap [ 30s] CCLD libkeymap-showmaps [ 30s] CCLD libkeymap-init [ 30s] CCLD libkeymap-kmap [ 30s] CCLD libkeymap-keys [ 30s] CCLD libkeymap-parse [ 30s] CCLD libkeymap-charset [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 30s] + exit 0 [ 30s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.2uQtKs [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd kbd-2.0.4 [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 [ 30s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 install [ 30s] Making install in src [ 30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 30s] Making install in vlock [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 30s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin' [ 30s] /bin/sh ../../libtool --mode=install /bin/install -c vlock '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin' [ 30s] libtool: install: /bin/install -c vlock /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/vlock [ 30s] make[3]: Nothing to be done for 'install-data-am'. [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 30s] Making install in libkeymap [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 30s] /bin/make install-am [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 30s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 30s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 30s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin' [ 31s] /bin/sh ../libtool --mode=install /bin/install -c mapscrn loadunimap dumpkeys loadkeys showkey setfont showconsolefont setleds setmetamode kbd_mode psfxtable fgconsole kbdrate chvt deallocvt openvt kbdinfo setvtrgb getkeycodes setkeycodes resizecons '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin' [ 31s] libtool: install: /bin/install -c mapscrn /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/mapscrn [ 31s] libtool: install: /bin/install -c loadunimap /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/loadunimap [ 31s] libtool: install: /bin/install -c dumpkeys /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/dumpkeys [ 31s] libtool: install: /bin/install -c loadkeys /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/loadkeys [ 31s] libtool: install: /bin/install -c showkey /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/showkey [ 31s] libtool: install: /bin/install -c setfont /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setfont [ 31s] libtool: install: /bin/install -c showconsolefont /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/showconsolefont [ 31s] libtool: install: /bin/install -c setleds /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setleds [ 31s] libtool: install: /bin/install -c setmetamode /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setmetamode [ 31s] libtool: install: /bin/install -c kbd_mode /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/kbd_mode [ 31s] libtool: install: /bin/install -c psfxtable /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/psfxtable [ 31s] libtool: install: /bin/install -c fgconsole /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/fgconsole [ 31s] libtool: install: /bin/install -c kbdrate /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/kbdrate [ 31s] libtool: install: /bin/install -c chvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/chvt [ 31s] libtool: install: /bin/install -c deallocvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/deallocvt [ 31s] libtool: install: /bin/install -c openvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/openvt [ 31s] libtool: install: /bin/install -c kbdinfo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/kbdinfo [ 31s] libtool: install: /bin/install -c setvtrgb /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setvtrgb [ 31s] libtool: install: /bin/install -c getkeycodes /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/getkeycodes [ 31s] libtool: install: /bin/install -c setkeycodes /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setkeycodes [ 31s] libtool: install: /bin/install -c resizecons /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/resizecons [ 31s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin' [ 31s] /bin/install -c unicode_start unicode_stop '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin' [ 31s] /bin/make install-exec-hook [ 31s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] for i in psfaddtable psfgettable psfstriptable; do \ [ 31s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/$i; \ [ 31s] ln -s psfxtable /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/$i || exit $?; \ [ 31s] done [ 31s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] make[3]: Nothing to be done for 'install-data-am'. [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 31s] Making install in data [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 31s] make[2]: Nothing to be done for 'install-exec-am'. [ 31s] /bin/make install-data-hook [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 31s] cp -r ./keymaps keymaps_Z [ 31s] chmod -R u+w keymaps_Z [ 31s] cd keymaps_Z && gzip -f -n -9 */*.map */*/*.map [ 31s] cp -r ./consolefonts consolefonts_Z [ 31s] cp -r ./partialfonts partialfonts_Z [ 31s] chmod -R u+w consolefonts_Z partialfonts_Z [ 31s] cd consolefonts_Z && gzip -f -n -9 * && gunzip ERRORS* README* [ 31s] cd partialfonts_Z && gzip -f -n -9 * [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts [ 31s] install -m 644 consolefonts_Z/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/partialfonts [ 31s] install -m 644 partialfonts_Z/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/partialfonts [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consoletrans [ 31s] install -m 644 ./consoletrans/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consoletrans [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/unimaps [ 31s] install -m 644 ./unimaps/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/unimaps [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386 [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/mac [ 31s] for i in include sun amiga atari i386/azerty i386/bepo i386/dvorak i386/fgGIod i386/qwerty i386/qwertz i386/include i386/olpc i386/colemak i386/carpalx mac/include mac/all; do \ [ 31s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/$i ;\ [ 31s] install -m 644 keymaps_Z/$i/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/$i ;\ [ 31s] done [ 31s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/ppc; ln -s mac /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/ppc [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 31s] Making install in po [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 31s] if test "kbd" = "gettext-tools"; then \ [ 31s] /bin/sh ../config/mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/gettext/po; \ [ 31s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 31s] /bin/install -c -m 644 ./$file \ [ 31s] /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/gettext/po/$file; \ [ 31s] done; \ [ 31s] for file in Makevars; do \ [ 31s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/gettext/po/$file; \ [ 31s] done; \ [ 31s] else \ [ 31s] : ; \ [ 31s] fi [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 31s] Making install in docs [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 31s] Making install in man [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 31s] Making install in man1 [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 31s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 31s] make[4]: Nothing to be done for 'install-exec-am'. [ 31s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man1' [ 31s] /bin/install -c -m 644 chvt.1 deallocvt.1 fgconsole.1 kbd_mode.1 openvt.1 psfaddtable.1 psfgettable.1 psfstriptable.1 psfxtable.1 setleds.1 setmetamode.1 showkey.1 unicode_start.1 unicode_stop.1 dumpkeys.1 loadkeys.1 vlock.1 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man1' [ 31s] /bin/make install-data-hook [ 31s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 31s] cd /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man1 && \ [ 31s] for f in dumpkeys.1 loadkeys.1; do \ [ 31s] /bin/sed -e "s#@DATADIR\@#/usr/lib/kbd#g" "$f" > "$f.new"; \ [ 31s] mv -f -- "$f.new" "$f"; \ [ 31s] done [ 31s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 31s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 31s] Making install in man5 [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 31s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 31s] make[4]: Nothing to be done for 'install-exec-am'. [ 31s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man5' [ 31s] /bin/install -c -m 644 keymaps.5 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man5' [ 31s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 31s] Making install in man8 [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 31s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 31s] make[4]: Nothing to be done for 'install-exec-am'. [ 31s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man8' [ 31s] /bin/install -c -m 644 getkeycodes.8 kbdrate.8 resizecons.8 setkeycodes.8 showconsolefont.8 setvtrgb.8 loadunimap.8 mapscrn.8 setfont.8 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man8' [ 31s] /bin/make install-data-hook [ 31s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 31s] cd /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/man/man8 && \ [ 31s] for f in loadunimap.8 mapscrn.8 setfont.8; do \ [ 31s] /bin/sed -e "s#@DATADIR\@#/usr/lib/kbd#g" "$f" > "$f.new"; \ [ 31s] mv -f -- "$f.new" "$f"; \ [ 31s] done [ 31s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 31s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 31s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 31s] make[4]: Nothing to be done for 'install-exec-am'. [ 31s] make[4]: Nothing to be done for 'install-data-am'. [ 31s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 31s] Making install in reference [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 31s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 31s] make[4]: Nothing to be done for 'install-exec-am'. [ 31s] make[4]: Nothing to be done for 'install-data-am'. [ 31s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 31s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 31s] make[3]: Nothing to be done for 'install-exec-am'. [ 31s] make[3]: Nothing to be done for 'install-data-am'. [ 31s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 31s] Making install in tests [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 31s] make[2]: Nothing to be done for 'install-exec-am'. [ 31s] make[2]: Nothing to be done for 'install-data-am'. [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 31s] make[2]: Nothing to be done for 'install-exec-am'. [ 31s] make[2]: Nothing to be done for 'install-data-am'. [ 31s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 31s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/info/dir [ 31s] + find /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 -regex '.*\.la$' [ 31s] + xargs rm -f -- [ 31s] + find /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 -regex '.*\.a$' [ 31s] + xargs rm -f -- [ 31s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386//usr/lib/kbd/keymaps/i386/qwerty/ro_win.map.gz [ 31s] + ln -sf sr-cy.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386//usr/lib/kbd/keymaps/i386/qwerty/sr-latin.map.gz [ 31s] + ln -sf us.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386//usr/lib/kbd/keymaps/i386/qwerty/ko.map.gz [ 31s] + sed -i -e 's,\,/usr/bin/kbd_mode,g;s,\,/usr/bin/setfont,g' /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386//usr/bin/unicode_start [ 31s] + ln -sf openvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/open [ 31s] + _target= [ 31s] + _symlinks=0 [ 31s] + _files=() [ 31s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z [ 31s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 31s] ++ sort [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 31s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 31s] ++ seq 1 1 [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 31s] + _files=() [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z [ 31s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 31s] ++ sort [ 31s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 31s] ++ seq 1 2 [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 31s] + _files=() [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z [ 31s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 31s] ++ sort [ 31s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 31s] ++ seq 1 1 [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 31s] + _files=() [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z [ 31s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 31s] ++ sort [ 31s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 31s] ++ seq 1 1 [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 31s] + _files=() [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z [ 31s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 31s] ++ sort [ 31s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 31s] ++ seq 1 1 [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 31s] + _files=() [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 31s] + _files+=($_file) [ 31s] + read _file [ 31s] + test -z [ 31s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 31s] ++ for i in '${_files[*]}' [ 31s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 31s] ++ sort [ 31s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 31s] ++ seq 1 1 [ 31s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 31s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 31s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 31s] + test 0 = 1 [ 31s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 31s] + _files=() [ 31s] + read _file [ 31s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/kbd-2.0.4 [ 31s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/chvt [ 33s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/deallocvt [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/dumpkeys [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/fgconsole [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/getkeycodes [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/kbd_mode [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/kbdinfo [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/kbdrate [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/loadkeys [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/loadunimap [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/mapscrn [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/openvt [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/psfxtable [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/resizecons [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setfont [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setkeycodes [ 36s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setleds [ 37s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setmetamode [ 37s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/setvtrgb [ 37s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/showconsolefont [ 38s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/showkey [ 38s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/bin/vlock [ 38s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 38s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 38s] cpio: glibc-2.24/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 38s] cpio: glibc-2.24/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 38s] cpio: glibc-2.24/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 38s] 1001 blocks [ 38s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/kbd-2.0.4/kbd-debuginfo.manifest [ 38s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/kbd-2.0.4/kbd-debugsource.manifest [ 38s] + /usr/lib/rpm/check-buildroot [ 38s] + /usr/lib/rpm//brp-compress [ 38s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 40s] + /usr/lib/rpm/brp-python-hardlink [ 40s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 [ 40s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.PhTUzS [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd kbd-2.0.4 [ 40s] + /bin/make check [ 40s] Making check in src [ 40s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 40s] Making check in vlock [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 40s] make[2]: Nothing to be done for 'check'. [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 40s] Making check in libkeymap [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 40s] /bin/make check-am [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 40s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 40s] make[2]: Nothing to be done for 'check-am'. [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 40s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 40s] Making check in data [ 40s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 40s] make[1]: Nothing to be done for 'check'. [ 40s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 40s] Making check in po [ 40s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 40s] make[1]: Nothing to be done for 'check'. [ 40s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 40s] Making check in docs [ 40s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 40s] Making check in man [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 40s] Making check in man1 [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 40s] make[3]: Nothing to be done for 'check'. [ 40s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 40s] Making check in man5 [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 40s] make[3]: Nothing to be done for 'check'. [ 40s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 40s] Making check in man8 [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 40s] make[3]: Nothing to be done for 'check'. [ 40s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 40s] make[3]: Nothing to be done for 'check-am'. [ 40s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 40s] Making check in reference [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 40s] make[3]: Nothing to be done for 'check-am'. [ 40s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 40s] make[2]: Nothing to be done for 'check-am'. [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 40s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 40s] Making check in tests [ 40s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 40s] /bin/make libkeymap-init libkeymap-kmap libkeymap-keys libkeymap-parse libkeymap-charset dumpkeys-fulltable alt-is-meta [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 40s] make[2]: 'libkeymap-init' is up to date. [ 40s] make[2]: 'libkeymap-kmap' is up to date. [ 40s] make[2]: 'libkeymap-keys' is up to date. [ 40s] make[2]: 'libkeymap-parse' is up to date. [ 40s] make[2]: 'libkeymap-charset' is up to date. [ 40s] sed \ [ 40s] -e 's,2.0.4,2.0.4,g' \ [ 40s] -e 's,@DATADIR@,.,g' \ [ 40s] -e 's,@BUILDDIR@,.,g' \ [ 40s] ./dumpkeys-fulltable [ 40s] touch -r dumpkeys-fulltable.in ./dumpkeys-fulltable [ 40s] chmod 755 ./dumpkeys-fulltable [ 40s] sed \ [ 40s] -e 's,2.0.4,2.0.4,g' \ [ 40s] -e 's,@DATADIR@,.,g' \ [ 40s] -e 's,@BUILDDIR@,.,g' \ [ 40s] ./alt-is-meta [ 40s] touch -r alt-is-meta.in ./alt-is-meta [ 40s] chmod 755 ./alt-is-meta [ 40s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 40s] /bin/make check-TESTS [ 40s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 40s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 40s] PASS: libkeymap-init [ 40s] PASS: libkeymap-kmap [ 40s] PASS: libkeymap-keys [ 40s] PASS: libkeymap-parse [ 40s] PASS: libkeymap-charset [ 41s] PASS: dumpkeys-fulltable [ 41s] PASS: alt-is-meta [ 41s] ============================================================================ [ 41s] Testsuite summary for kbd 2.0.4 [ 41s] ============================================================================ [ 41s] # TOTAL: 7 [ 41s] # PASS: 7 [ 41s] # SKIP: 0 [ 41s] # XFAIL: 0 [ 41s] # FAIL: 0 [ 41s] # XPASS: 0 [ 41s] # ERROR: 0 [ 41s] ============================================================================ [ 41s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 41s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 41s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 41s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 41s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 41s] + exit 0 [ 41s] Processing files: kbd-2.0.4-3.1.i686 [ 41s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 41s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 41s] [ 41s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.uxojhk [ 41s] + umask 022 [ 41s] + cd /home/abuild/rpmbuild/BUILD [ 41s] + cd kbd-2.0.4 [ 41s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/licenses/kbd [ 41s] + export LICENSEDIR [ 41s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/licenses/kbd [ 41s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386/usr/share/licenses/kbd [ 41s] + exit 0 [ 41s] Provides: kbd = 2.0.4-3.1 kbd(x86-32) = 2.0.4-3.1 [ 41s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 41s] Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libpam.so.0 libpam.so.0(LIBPAM_1.0) libpam_misc.so.0 libpam_misc.so.0(LIBPAM_MISC_1.0) [ 41s] Processing files: kbd-debugsource-2.0.4-3.1.i686 [ 41s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 41s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 41s] [ 41s] Provides: kbd-debugsource = 2.0.4-3.1 kbd-debugsource(x86-32) = 2.0.4-3.1 [ 41s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 41s] Processing files: kbd-misc-2.0.4-3.1.noarch [ 41s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 41s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 41s] [ 44s] Provides: kbd-misc = 2.0.4-3.1 [ 44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 44s] Processing files: kbd-docs-2.0.4-3.1.i686 [ 44s] Provides: kbd-docs = 2.0.4-3.1 kbd-docs(x86-32) = 2.0.4-3.1 [ 44s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 44s] Processing files: kbd-debuginfo-2.0.4-3.1.i686 [ 44s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 44s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 44s] [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] warning: File listed twice: /usr/lib/debug/.build-id [ 44s] Provides: kbd-debuginfo = 2.0.4-3.1 kbd-debuginfo(x86-32) = 2.0.4-3.1 [ 44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 44s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 [ 44s] Wrote: /home/abuild/rpmbuild/SRPMS/kbd-2.0.4-3.1.src.rpm [ 44s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/kbd-2.0.4-3.1.i686.rpm [ 44s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/kbd-debugsource-2.0.4-3.1.i686.rpm [ 44s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/noarch/kbd-misc-2.0.4-3.1.noarch.rpm [ 44s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/kbd-docs-2.0.4-3.1.i686.rpm [ 45s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/kbd-debuginfo-2.0.4-3.1.i686.rpm [ 45s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.HfeYXC [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd kbd-2.0.4 [ 45s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-3.1.i386 [ 45s] + exit 0 [ 45s] ... checking for files with abuild user/group [ 45s] ... creating baselibs [ 45s] [ 45s] obsnw02 finished "build kbd.spec" at Fri Nov 2 01:46:31 UTC 2018. [ 45s] Retried build at Fri Nov 9 12:44:54 2018 returned same result, skipped Retried build at Fri Nov 16 14:33:15 2018 returned same result, skipped Retried build at Mon Nov 19 07:33:21 2018 returned same result, skipped Retried build at Fri Nov 30 15:55:35 2018 returned same result, skipped Retried build at Fri Jan 11 07:34:33 2019 returned same result, skipped Retried build at Sat Mar 16 01:47:36 2019 returned same result, skipped