[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw03 started "build _service:gbs:cryptsetup.spec" at Sat Nov 3 01:45:20 UTC 2018. [ 0s] [ 0s] Building cryptsetup for project 'Tizen:5.0:Unified' repository 'standard' arch 'aarch64' srcmd5 'b4d45f0de6225fe51c3676119352ee02' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling libgcc... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/109] installing libmagic-data-5.32-3.43 [ 8s] [2/109] installing setup-0.9-3.1 [ 8s] [3/109] installing filesystem-3.1-3.1 [ 8s] [4/109] installing glibc-2.24-3.18 [ 8s] [5/109] installing bash-3.2.57-3.1 [ 8s] [6/109] installing binutils-2.27-3.21 [ 9s] [7/109] installing cpio-2.11-3.1 [ 9s] [8/109] installing diffutils-3.3-3.1 [ 9s] [9/109] installing findutils-4.3.8-3.68 [ 9s] [10/109] installing hostname-3.20-3.1 [ 9s] [11/109] installing libatomic-6.2.1-3.2 [ 9s] [12/109] installing libattr-2.4.47-3.75 [ 9s] [13/109] installing libbz2-1.0.6-3.68 [ 9s] [14/109] installing libcap-2.24-3.76 [ 9s] [15/109] installing libelf-0.153-3.8 [ 9s] [16/109] installing libext2fs-1.43.4-3.1 [ 9s] [17/109] installing libfreebl3-3.34.1-3.39 [ 9s] [18/109] installing libgcc-6.2.1-3.2 [ 9s] [19/109] installing libgomp-6.2.1-3.2 [ 9s] [20/109] installing libgpg-error-1.27-3.1 [ 9s] [21/109] installing libitm-6.2.1-3.2 [ 9s] [22/109] installing libltdl-2.4.2-3.55 [ 9s] [23/109] installing liblua-5.1.5-3.3 [ 9s] [24/109] installing liblzma-5.2.3-3.49 [ 10s] [25/109] installing libpcre-8.41-3.1 [ 10s] [26/109] installing libpopt-1.16-3.3 [ 10s] [27/109] installing libsmack-1.3.1-3.68 [ 10s] [28/109] installing libsmartcols-2.30-3.1 [ 10s] [29/109] installing libsqlite-3.24.0-3.19 [ 10s] [30/109] installing libuuid-2.30-3.1 [ 10s] [31/109] installing m4-1.4.17-3.1 [ 10s] [32/109] installing net-tools-2.0_20121208git-3.1 [ 10s] [33/109] installing nspr-4.12-3.3 [ 10s] [34/109] installing patch-2.7-3.3 [ 10s] [35/109] installing pkg-config-0.28-3.69 [ 10s] [36/109] installing sed-4.1c-3.1 [ 10s] [37/109] installing update-alternatives-1.18.15-3.1 [ 10s] [38/109] installing which-2.20-3.1 [ 10s] [39/109] installing zlib-1.2.11-3.73 [ 10s] [40/109] installing shadow-utils-4.1.4.2-3.1 [ 10s] [41/109] installing build-compare-2015.04.28-3.13 [ 10s] [42/109] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 11s] [43/109] installing terminfo-base-full-6.1-3.43 [ 11s] [44/109] installing coreutils-6.9-3.1 [ 11s] [45/109] installing cpp-6.2.1-3.2 [ 12s] [46/109] installing gawk-3.1.5-3.1 [ 12s] [47/109] installing gcc-c++-6.2.1-3.2 [ 13s] [48/109] installing grep-2.5.2-3.1 [ 13s] [49/109] installing libacl-2.2.52-3.72 [ 13s] [50/109] installing libasm-0.153-3.8 [ 13s] [51/109] installing libblkid-2.30-3.1 [ 14s] [52/109] installing libgcrypt-1.8.3-3.1 [ 14s] [53/109] installing libstdc++-6.2.1-3.2 [ 14s] [54/109] installing libuuid-devel-2.30-3.1 [ 14s] [55/109] installing make-4.0-3.6 [ 14s] [56/109] installing nss-certs-3.34.1-3.39 [ 14s] [57/109] installing popt-devel-1.16-3.3 [ 14s] [58/109] installing smack-1.3.1-3.68 [ 14s] [59/109] installing bzip2-1.0.6-3.68 [ 14s] [60/109] installing libgfortran-6.2.1-3.2 [ 14s] [61/109] installing libmagic-5.32-3.43 [ 14s] [62/109] installing libxml2-2.9.7-3.23 [ 14s] [63/109] installing xz-5.2.3-3.49 [ 15s] [64/109] installing libkmod-25-3.1 [ 15s] [65/109] installing libdw-0.153-3.8 [ 15s] [66/109] installing libstdc++-devel-6.2.1-3.2 [ 15s] [67/109] installing file-5.32-3.43 [ 15s] [68/109] installing libmount-2.30-3.1 [ 15s] [69/109] installing linux-glibc-devel-3.10-3.75 [ 15s] [70/109] installing tar-1.17-3.1 [ 15s] [71/109] installing db4-4.8.30.NC-3.65 [ 15s] [72/109] installing gettext-runtime-0.19.8.1-3.13 [ 15s] [73/109] installing glibc-locale-2.24-3.18 [ 16s] [74/109] installing gzip-1.3.12-3.76 [ 16s] [75/109] installing libcc1-6.2.1-3.2 [ 16s] [76/109] installing libfdisk-2.30-3.1 [ 16s] [77/109] installing libubsan-6.2.1-3.2 [ 16s] [78/109] installing pam-1.1.6-3.1 [ 16s] [79/109] installing libncurses6-6.1-3.43 [ 16s] [80/109] installing tzdata-2018c-2.1 [ 16s] [81/109] installing elfutils-0.153-3.8 [ 16s] [82/109] installing libncurses-6.1-3.43 [ 16s] [83/109] installing glibc-devel-2.24-3.18 [ 16s] [84/109] installing less-466-3.1 [ 16s] [85/109] installing libreadline-5.2-3.27 [ 16s] [86/109] installing procps-ng-3.3.15-3.1 [ 16s] [87/109] installing gettext-tools-0.19.8.1-3.13 [ 17s] [88/109] installing perl-5.20.0-3.9 [ 18s] [89/109] installing libsystemd-231-3.1 [ 18s] [90/109] installing gcc-6.2.1-3.2 [ 19s] [91/109] installing systemd-231-3.1 [ 20s] [92/109] installing build-mkbaselibs-20120927-3.1 [ 20s] [93/109] installing libdevmapper-1.02.77-3.1 [ 20s] [94/109] installing qemu-accel-x86_64-aarch64-0.4-4.1 [ 25s] [95/109] installing autoconf-2.69-3.23 [ 25s] [96/109] installing systemd-devel-231-3.1 [ 25s] [97/109] installing libgpg-error-devel-1.27-3.1 [ 25s] [98/109] installing util-linux-2.30-3.1 [ 25s] [99/109] installing device-mapper-1.02.77-3.1 [ 25s] [100/109] installing automake-1.15.1-3.39 [ 26s] [101/109] installing util-linux-su-2.30-3.1 [ 26s] [102/109] installing build-20120927-3.1 [ 26s] [103/109] installing libgcrypt-devel-1.8.3-3.1 [ 26s] [104/109] installing device-mapper-devel-1.02.77-3.1 [ 26s] [105/109] installing libtool-2.4.2-3.55 [ 26s] [106/109] installing nss-3.34.1-3.39 [ 26s] [107/109] installing libsoftokn3-3.34.1-3.39 [ 26s] [108/109] installing rpm-4.11.0.1-3.35 [ 26s] [109/109] installing rpm-build-4.11.0.1-3.35 [ 26s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 26s] now finalizing build dir... [ 27s] build target is aarch64-tizen-linux [ 27s] ----------------------------------------------------------------- [ 27s] I have the following modifications for cryptsetup.spec: [ 27s] 5c5 [ 27s] < Release: 1 [ 27s] --- [ 27s] > Release: 3.1 [ 27s] 24c24 [ 27s] < BuildRequires: gettext [ 27s] --- [ 27s] > BuildRequires: gettext-tools [ 27s] ----------------------------------------------------------------- [ 27s] ----- building cryptsetup.spec (user abuild) [ 27s] ----------------------------------------------------------------- [ 27s] ----------------------------------------------------------------- [ 27s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.0:Unified/standard/b4d45f0de6225fe51c3676119352ee02-cryptsetup' -ba /home/abuild/rpmbuild/SOURCES/cryptsetup.spec [ 27s] Building target platforms: aarch64-tizen-linux [ 27s] Building for target aarch64-tizen-linux [ 27s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6VDuQL [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + rm -rf cryptsetup-1.6.7 [ 27s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/cryptsetup-1.6.7.tar.xz [ 27s] + /bin/tar -xf - [ 27s] + STATUS=0 [ 27s] + '[' 0 -ne 0 ']' [ 27s] + cd cryptsetup-1.6.7 [ 27s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 27s] + echo 'Patch #0 (4c6390a-to-064b272.diff):' [ 27s] Patch #0 (4c6390a-to-064b272.diff): [ 27s] + /bin/cat /home/abuild/rpmbuild/SOURCES/4c6390a-to-064b272.diff [ 27s] + /bin/patch -p1 --fuzz=2 [ 27s] patching file autogen.sh [ 27s] + echo 'Patch #1 (0002-Enable-ASLR-feature.patch):' [ 27s] Patch #1 (0002-Enable-ASLR-feature.patch): [ 27s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Enable-ASLR-feature.patch [ 27s] + /bin/patch -p1 --fuzz=2 [ 27s] patching file src/Makefile.am [ 27s] patching file src/Makefile.in [ 27s] + echo 'Patch #2 (0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch):' [ 27s] Patch #2 (0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch): [ 27s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch [ 27s] + /bin/patch -p1 --fuzz=2 [ 27s] patching file COPYING.GPL-2.0+ (renamed from COPYING) [ 27s] patching file COPYING.LGPL-2.1+ (renamed from COPYING.LGPL) [ 27s] + exit 0 [ 27s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.t0Jz1X [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd cryptsetup-1.6.7 [ 27s] ++ uname -m [ 27s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 27s] + ref=/usr/lib/rpm [ 27s] + for s in guess sub [ 27s] ++ find -maxdepth 8 -name config.guess [ 27s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 27s] + grep -q config-patches@ ./config.guess [ 27s] + grep -q aarch64 ./config.guess [ 27s] + grep -q ppc64le ./config.guess [ 27s] + for s in guess sub [ 27s] ++ find -maxdepth 8 -name config.sub [ 27s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 27s] + grep -q config-patches@ ./config.sub [ 27s] + grep -q aarch64 ./config.sub [ 27s] + grep -q ppc64le ./config.sub [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 27s] + export CFLAGS [ 27s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 27s] + export CXXFLAGS [ 27s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 27s] + export FFLAGS [ 27s] + LDFLAGS= [ 27s] + export LDFLAGS [ 27s] + chmod +x ./autogen.sh [ 27s] + ./autogen.sh --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib64 [ 28s] [ 28s] Generate build-system by: [ 28s] autopoint: /usr/bin/autopoint (GNU gettext-tools) 0.19.8.1 [ 29s] aclocal: aclocal (GNU automake) 1.15.1 [ 29s] autoconf: autoconf (GNU Autoconf) 2.69 [ 30s] automake: automake (GNU automake) 1.15.1 [ 30s] libtoolize: libtoolize (GNU libtool) 2.4.2 [ 30s] [ 34s] Copying file m4/codeset.m4 [ 34s] Copying file m4/glibc2.m4 [ 34s] Copying file m4/glibc21.m4 [ 34s] Copying file m4/intdiv0.m4 [ 34s] Copying file m4/intmax.m4 [ 34s] Copying file m4/inttypes-h.m4 [ 34s] Copying file m4/inttypes-pri.m4 [ 34s] Copying file m4/inttypes_h.m4 [ 34s] Copying file m4/lcmessage.m4 [ 34s] Copying file m4/lock.m4 [ 34s] Copying file m4/longdouble.m4 [ 34s] Copying file m4/longlong.m4 [ 34s] Copying file m4/printf-posix.m4 [ 35s] Copying file m4/signed.m4 [ 35s] Copying file m4/size_max.m4 [ 35s] Copying file m4/stdint_h.m4 [ 35s] Copying file m4/uintmax_t.m4 [ 35s] Copying file m4/ulonglong.m4 [ 35s] Copying file m4/visibility.m4 [ 35s] Copying file m4/wchar_t.m4 [ 35s] Copying file m4/wint_t.m4 [ 35s] Copying file m4/xsize.m4 [ 35s] Copying file po/Makevars.template [ 35s] libtoolize: putting auxiliary files in `.'. [ 35s] libtoolize: copying file `./ltmain.sh' [ 35s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 35s] libtoolize: copying file `m4/libtool.m4' [ 35s] libtoolize: copying file `m4/ltoptions.m4' [ 35s] libtoolize: copying file `m4/ltsugar.m4' [ 35s] libtoolize: copying file `m4/ltversion.m4' [ 35s] libtoolize: copying file `m4/lt~obsolete.m4' [ 49s] configure.ac:67: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 49s] configure.ac:67: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 49s] configure.ac:67: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 49s] Makefile.am: installing './COPYING' using GNU General Public License v3 file [ 49s] Makefile.am: Consider adding the COPYING file to the version control system [ 49s] Makefile.am: for your code, to avoid questions about which license your project uses [ 53s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 53s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 53s] automake: warning: possible forward-incompatibility. [ 53s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 53s] automake: automake option hasn't been enabled. For now, the corresponding output [ 53s] automake: object file(s) will be placed in the top-level directory. However, [ 53s] automake: this behaviour will change in future Automake versions: they will [ 53s] automake: unconditionally cause object files to be placed in the same subdirectory [ 53s] automake: of the corresponding sources. [ 53s] automake: You are advised to start using 'subdir-objects' option throughout your [ 53s] automake: project, to avoid future incompatibilities. [ 53s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 53s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 53s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_fips.c' is in a subdirectory, [ 53s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 53s] src/Makefile.am:76: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 53s] src/Makefile.am:76: but option 'subdir-objects' is disabled [ 53s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 53s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 53s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 53s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 54s] tests/Makefile.am:44: warning: source file '$(top_srcdir)/lib/utils_loop.c' is in a subdirectory, [ 54s] tests/Makefile.am:44: but option 'subdir-objects' is disabled [ 59s] Running ./configure --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib64 ... [ 59s] checking whether make supports nested variables... yes [ 59s] checking for a BSD-compatible install... /usr/bin/install -c [ 59s] checking whether build environment is sane... yes [ 59s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 59s] checking for gawk... gawk [ 59s] checking whether make sets $(MAKE)... yes [ 60s] checking build system type... aarch64-unknown-linux-gnu [ 60s] checking host system type... aarch64-unknown-linux-gnu [ 60s] checking for style of include used by make... GNU [ 60s] checking for gcc... gcc [ 60s] checking whether the C compiler works... yes [ 60s] checking for C compiler default output file name... a.out [ 60s] checking for suffix of executables... [ 60s] checking whether we are cross compiling... no [ 60s] checking for suffix of object files... o [ 60s] checking whether we are using the GNU C compiler... yes [ 60s] checking whether gcc accepts -g... yes [ 60s] checking for gcc option to accept ISO C89... none needed [ 60s] checking whether gcc understands -c and -o together... yes [ 61s] checking dependency style of gcc... gcc3 [ 61s] checking how to run the C preprocessor... gcc -E [ 61s] checking for grep that handles long lines and -e... /usr/bin/grep [ 61s] checking for egrep... /usr/bin/grep -E [ 61s] checking for ANSI C header files... yes [ 61s] checking for sys/types.h... yes [ 61s] checking for sys/stat.h... yes [ 61s] checking for stdlib.h... yes [ 61s] checking for string.h... yes [ 61s] checking for memory.h... yes [ 61s] checking for strings.h... yes [ 61s] checking for inttypes.h... yes [ 61s] checking for stdint.h... yes [ 61s] checking for unistd.h... yes [ 61s] checking minix/config.h usability... no [ 61s] checking minix/config.h presence... no [ 61s] checking for minix/config.h... no [ 61s] checking whether it is safe to define __EXTENSIONS__... yes [ 61s] checking for gcc... (cached) gcc [ 62s] checking whether we are using the GNU C compiler... (cached) yes [ 62s] checking whether gcc accepts -g... (cached) yes [ 62s] checking for gcc option to accept ISO C89... (cached) none needed [ 62s] checking whether gcc understands -c and -o together... (cached) yes [ 62s] checking dependency style of gcc... (cached) gcc3 [ 62s] checking how to run the C preprocessor... gcc -E [ 62s] checking whether make sets $(MAKE)... (cached) yes [ 62s] checking how to print strings... printf [ 62s] checking for a sed that does not truncate output... /usr/bin/sed [ 62s] checking for fgrep... /usr/bin/grep -F [ 62s] checking for ld used by gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 62s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 62s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 62s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 62s] checking whether ln -s works... yes [ 62s] checking the maximum length of command line arguments... 1572864 [ 62s] checking whether the shell understands some XSI constructs... yes [ 62s] checking whether the shell understands "+="... yes [ 62s] checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop [ 62s] checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop [ 62s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 62s] checking for objdump... objdump [ 62s] checking how to recognize dependent libraries... pass_all [ 62s] checking for dlltool... no [ 62s] checking how to associate runtime and link libraries... printf %s\n [ 62s] checking for ar... ar [ 62s] checking for archiver @FILE support... @ [ 62s] checking for strip... strip [ 62s] checking for ranlib... ranlib [ 62s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 62s] checking for sysroot... no [ 62s] checking for mt... no [ 62s] checking if : is a manifest tool... no [ 62s] checking for dlfcn.h... yes [ 62s] checking for objdir... .libs [ 62s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 62s] checking for gcc option to produce PIC... -fPIC -DPIC [ 62s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 62s] checking if gcc static flag -static works... no [ 62s] checking if gcc supports -c -o file.o... yes [ 62s] checking if gcc supports -c -o file.o... (cached) yes [ 62s] checking whether the gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 62s] checking whether -lc should be explicitly linked in... no [ 62s] checking dynamic linker characteristics... GNU/Linux ld.so [ 62s] checking how to hardcode library paths into programs... immediate [ 62s] checking whether stripping libraries is possible... yes [ 62s] checking if libtool supports shared libraries... yes [ 62s] checking whether to build shared libraries... yes [ 62s] checking whether to build static libraries... no [ 62s] checking for pkg-config... /usr/bin/pkg-config [ 62s] checking pkg-config is at least version 0.9.0... yes [ 62s] checking for dirent.h that defines DIR... yes [ 63s] checking for library containing opendir... none required [ 63s] checking for ANSI C header files... (cached) yes [ 63s] checking fcntl.h usability... yes [ 63s] checking fcntl.h presence... yes [ 63s] checking for fcntl.h... yes [ 63s] checking malloc.h usability... yes [ 63s] checking malloc.h presence... yes [ 63s] checking for malloc.h... yes [ 63s] checking for inttypes.h... (cached) yes [ 63s] checking sys/ioctl.h usability... yes [ 63s] checking sys/ioctl.h presence... yes [ 63s] checking for sys/ioctl.h... yes [ 63s] checking sys/mman.h usability... yes [ 63s] checking sys/mman.h presence... yes [ 63s] checking for sys/mman.h... yes [ 63s] checking ctype.h usability... yes [ 63s] checking ctype.h presence... yes [ 63s] checking for ctype.h... yes [ 63s] checking for unistd.h... (cached) yes [ 63s] checking locale.h usability... yes [ 63s] checking locale.h presence... yes [ 63s] checking for locale.h... yes [ 63s] checking byteswap.h usability... yes [ 63s] checking byteswap.h presence... yes [ 63s] checking for byteswap.h... yes [ 63s] checking endian.h usability... yes [ 63s] checking endian.h presence... yes [ 63s] checking for endian.h... yes [ 63s] checking uuid/uuid.h usability... yes [ 63s] checking uuid/uuid.h presence... yes [ 63s] checking for uuid/uuid.h... yes [ 63s] checking libdevmapper.h usability... yes [ 63s] checking libdevmapper.h presence... yes [ 63s] checking for libdevmapper.h... yes [ 63s] checking for uuid_clear in -luuid... yes [ 63s] checking for library containing clock_gettime... none required [ 64s] checking for posix_memalign... yes [ 64s] checking for clock_gettime... yes [ 64s] checking for an ANSI C-conforming const... yes [ 64s] checking whether byte ordering is bigendian... no [ 64s] checking for off_t... yes [ 64s] checking for special C compiler options needed for large files... no [ 64s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 64s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 64s] checking whether gcc needs -traditional... no [ 64s] checking whether strerror_r is declared... yes [ 64s] checking for strerror_r... yes [ 64s] checking whether strerror_r returns char *... yes [ 64s] checking whether NLS is requested... yes [ 64s] checking for msgfmt... /usr/bin/msgfmt [ 64s] checking for gmsgfmt... /usr/bin/msgfmt [ 64s] checking for xgettext... /usr/bin/xgettext [ 65s] checking for msgmerge... /usr/bin/msgmerge [ 65s] checking for ld used by GCC... /usr/aarch64-tizen-linux-gnu/bin/ld [ 65s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 65s] checking for shared library run path origin... done [ 65s] checking for CFPreferencesCopyAppValue... no [ 65s] checking for CFLocaleCopyCurrent... no [ 65s] checking for GNU gettext in libc... yes [ 65s] checking whether to use NLS... yes [ 65s] checking where the gettext function comes from... libc [ 65s] checking for poptConfigFileToString in -lpopt... yes [ 65s] checking for DEVMAPPER... yes [ 65s] checking whether dm_task_secure_data is declared... yes [ 65s] checking whether dm_task_retry_remove is declared... yes [ 65s] checking whether DM_UDEV_DISABLE_DISK_RULES_FLAG is declared... yes [ 65s] checking linux/if_alg.h usability... yes [ 65s] checking linux/if_alg.h presence... yes [ 65s] checking for linux/if_alg.h... yes [ 65s] checking for libgcrypt-config... /usr/bin/libgcrypt-config [ 65s] checking for LIBGCRYPT - version >= 1.6.1... yes (1.8.3) [ 65s] configure: WARNING: [ 65s] *** [ 65s] *** The config script /usr/bin/libgcrypt-config was [ 65s] *** built for aarch64-tizen-linux-gnu and thus may not match the [ 65s] *** used host aarch64-unknown-linux-gnu. [ 65s] *** You may want to use the configure option --with-libgcrypt-prefix [ 65s] *** to specify a matching config script or use $SYSROOT. [ 65s] *** [ 65s] checking for libgcrypt-config... (cached) /usr/bin/libgcrypt-config [ 65s] checking for LIBGCRYPT - version >= 1.1.42... yes (1.8.3) [ 65s] configure: WARNING: [ 65s] *** [ 65s] *** The config script /usr/bin/libgcrypt-config was [ 65s] *** built for aarch64-tizen-linux-gnu and thus may not match the [ 65s] *** used host aarch64-unknown-linux-gnu. [ 65s] *** You may want to use the configure option --with-libgcrypt-prefix [ 65s] *** to specify a matching config script or use $SYSROOT. [ 65s] *** [ 65s] checking if internal cryptsetup PBKDF2 is compiled-in... no [ 65s] checking that generated files are newer than configure... done [ 65s] configure: creating ./config.status [ 66s] config.status: creating Makefile [ 66s] config.status: creating lib/Makefile [ 66s] config.status: creating lib/libcryptsetup.pc [ 66s] config.status: creating lib/crypto_backend/Makefile [ 66s] config.status: creating lib/luks1/Makefile [ 66s] config.status: creating lib/loopaes/Makefile [ 66s] config.status: creating lib/verity/Makefile [ 67s] config.status: creating lib/tcrypt/Makefile [ 67s] config.status: creating src/Makefile [ 67s] config.status: creating po/Makefile.in [ 67s] config.status: creating man/Makefile [ 67s] config.status: creating tests/Makefile [ 67s] config.status: creating python/Makefile [ 67s] config.status: creating config.h [ 67s] config.status: executing depfiles commands [ 68s] config.status: executing libtool commands [ 69s] config.status: executing po-directories commands [ 69s] config.status: creating po/POTFILES [ 69s] config.status: creating po/Makefile [ 69s] Now type `make' to compile cryptsetup [ 69s] + make -j4 [ 69s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/missing autoheader) [ 70s] rm -f stamp-h1 [ 70s] touch config.h.in [ 70s] cd . && /bin/sh ./config.status config.h [ 71s] config.status: creating config.h [ 71s] config.status: config.h is unchanged [ 71s] make all-recursive [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 71s] Making all in lib [ 71s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 71s] Making all in crypto_backend [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 71s] CC libcrypto_backend_la-crypto_cipher_kernel.lo [ 71s] CC libcrypto_backend_la-crypto_storage.lo [ 71s] CC libcrypto_backend_la-crc32.lo [ 71s] CC libcrypto_backend_la-pbkdf_check.lo [ 71s] CC libcrypto_backend_la-crypto_gcrypt.lo [ 71s] CCLD libcrypto_backend.la [ 71s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 71s] Making all in luks1 [ 71s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 71s] CC libluks1_la-af.lo [ 71s] CC libluks1_la-keymanage.lo [ 71s] CC libluks1_la-keyencryption.lo [ 72s] CCLD libluks1.la [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 72s] Making all in loopaes [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 72s] CC libloopaes_la-loopaes.lo [ 72s] CCLD libloopaes.la [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 72s] Making all in verity [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 72s] CC libverity_la-verity_hash.lo [ 72s] CC libverity_la-verity.lo [ 72s] CCLD libverity.la [ 72s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 72s] Making all in tcrypt [ 72s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 72s] CC libtcrypt_la-tcrypt.lo [ 73s] CCLD libtcrypt.la [ 73s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 73s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 73s] CC libcryptsetup_la-setup.lo [ 73s] CC libcryptsetup_la-utils.lo [ 73s] CC libcryptsetup_la-utils_benchmark.lo [ 73s] CC libcryptsetup_la-utils_crypt.lo [ 73s] CC libcryptsetup_la-utils_loop.lo [ 73s] CC libcryptsetup_la-utils_devpath.lo [ 73s] CC libcryptsetup_la-utils_wipe.lo [ 73s] CC libcryptsetup_la-utils_fips.lo [ 73s] CC libcryptsetup_la-utils_device.lo [ 73s] CC libcryptsetup_la-libdevmapper.lo [ 73s] CC libcryptsetup_la-volumekey.lo [ 73s] CC libcryptsetup_la-random.lo [ 73s] CC libcryptsetup_la-crypt_plain.lo [ 73s] CCLD libcryptsetup.la [ 74s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 74s] Making all in src [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 74s] CC cryptsetup-utils_crypt.o [ 74s] CC cryptsetup-utils_loop.o [ 74s] CC cryptsetup-utils_fips.o [ 74s] CC cryptsetup-utils_tools.o [ 74s] CC cryptsetup-utils_password.o [ 74s] CC cryptsetup-cryptsetup.o [ 74s] CC veritysetup-utils_crypt.o [ 74s] CC veritysetup-utils_loop.o [ 74s] CC veritysetup-utils_tools.o [ 74s] CC veritysetup-veritysetup.o [ 74s] CCLD veritysetup [ 74s] CCLD cryptsetup [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 74s] Making all in man [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 74s] make[2]: Nothing to be done for 'all'. [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 74s] Making all in python [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 74s] make[2]: Nothing to be done for 'all'. [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 74s] Making all in tests [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 74s] make[2]: Nothing to be done for 'all'. [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 74s] Making all in po [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 74s] make[2]: Nothing to be done for 'all'. [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 74s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 74s] + exit 0 [ 74s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.kr8CXz [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd cryptsetup-1.6.7 [ 74s] + LANG=C [ 74s] + export LANG [ 74s] + unset DISPLAY [ 74s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 [ 74s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 [ 74s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 [ 74s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 install [ 74s] Making install in lib [ 74s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 74s] Making install in crypto_backend [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 74s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 74s] make[3]: Nothing to be done for 'install-exec-am'. [ 74s] make[3]: Nothing to be done for 'install-data-am'. [ 74s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 74s] Making install in luks1 [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 74s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 74s] make[3]: Nothing to be done for 'install-exec-am'. [ 74s] make[3]: Nothing to be done for 'install-data-am'. [ 74s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 74s] Making install in loopaes [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 74s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 74s] make[3]: Nothing to be done for 'install-exec-am'. [ 74s] make[3]: Nothing to be done for 'install-data-am'. [ 74s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 74s] Making install in verity [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 74s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 74s] make[3]: Nothing to be done for 'install-exec-am'. [ 74s] make[3]: Nothing to be done for 'install-data-am'. [ 74s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 74s] Making install in tcrypt [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 74s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 74s] make[3]: Nothing to be done for 'install-exec-am'. [ 74s] make[3]: Nothing to be done for 'install-data-am'. [ 74s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 74s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 74s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 74s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 74s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64' [ 74s] /bin/sh ../libtool --mode=install /usr/bin/install -c libcryptsetup.la '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64' [ 74s] libtool: install: /usr/bin/install -c .libs/libcryptsetup.so.4.7.0 /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64/libcryptsetup.so.4.7.0 [ 74s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64 && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so.4 || { rm -f libcryptsetup.so.4 && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so.4; }; }) [ 74s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64 && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so || { rm -f libcryptsetup.so && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so; }; }) [ 74s] libtool: install: /usr/bin/install -c .libs/libcryptsetup.lai /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64/libcryptsetup.la [ 74s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 74s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/include' [ 74s] /usr/bin/install -c -m 644 libcryptsetup.h '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/include' [ 75s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64/pkgconfig' [ 75s] /usr/bin/install -c -m 644 libcryptsetup.pc '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64/pkgconfig' [ 75s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 75s] Making install in src [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 75s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/sbin' [ 75s] /bin/sh ../libtool --mode=install /usr/bin/install -c cryptsetup veritysetup '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/sbin' [ 75s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib64' [ 75s] libtool: install: /usr/bin/install -c .libs/cryptsetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/sbin/cryptsetup [ 75s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib64' [ 75s] libtool: install: /usr/bin/install -c .libs/veritysetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/sbin/veritysetup [ 75s] make[2]: Nothing to be done for 'install-data-am'. [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 75s] Making install in man [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 75s] make[2]: Nothing to be done for 'install-exec-am'. [ 75s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/man/man8' [ 75s] /usr/bin/install -c -m 644 cryptsetup.8 veritysetup.8 '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/man/man8' [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 75s] Making install in python [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 75s] make[2]: Nothing to be done for 'install-data-am'. [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 75s] Making install in tests [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 75s] make[2]: Nothing to be done for 'install-exec-am'. [ 75s] make[2]: Nothing to be done for 'install-data-am'. [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 75s] Making install in po [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 75s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share [ 75s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/cs/LC_MESSAGES/cryptsetup.mo [ 75s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/de/LC_MESSAGES/cryptsetup.mo [ 75s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/es/LC_MESSAGES/cryptsetup.mo [ 75s] installing fi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/fi/LC_MESSAGES/cryptsetup.mo [ 75s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/fr/LC_MESSAGES/cryptsetup.mo [ 75s] installing id.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/id/LC_MESSAGES/cryptsetup.mo [ 75s] installing it.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/it/LC_MESSAGES/cryptsetup.mo [ 75s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/nl/LC_MESSAGES/cryptsetup.mo [ 75s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/pl/LC_MESSAGES/cryptsetup.mo [ 75s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo [ 75s] installing uk.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/uk/LC_MESSAGES/cryptsetup.mo [ 75s] installing vi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/locale/vi/LC_MESSAGES/cryptsetup.mo [ 75s] if test "cryptsetup" = "gettext-tools"; then \ [ 75s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/gettext/po; \ [ 75s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 75s] /usr/bin/install -c -m 644 ./$file \ [ 75s] /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/gettext/po/$file; \ [ 75s] done; \ [ 75s] for file in Makevars; do \ [ 75s] rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/gettext/po/$file; \ [ 75s] done; \ [ 75s] else \ [ 75s] : ; \ [ 75s] fi [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 75s] make[2]: Nothing to be done for 'install-exec-am'. [ 75s] make[2]: Nothing to be done for 'install-data-am'. [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 75s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 75s] + rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/info/dir [ 75s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 -regex '.*\.la$' [ 75s] + xargs rm -f -- [ 75s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 -regex '.*\.a$' [ 75s] + xargs rm -f -- [ 75s] + cp -a /home/abuild/rpmbuild/SOURCES/cryptsetup.manifest /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/binary_package_name.manifest [ 75s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7 [ 75s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/lib64/libcryptsetup.so.4.7.0 [ 75s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/sbin/cryptsetup [ 76s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/sbin/veritysetup [ 76s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 76s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 76s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 76s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 76s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 76s] 858 blocks [ 76s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/cryptsetup-debuginfo.manifest [ 76s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/cryptsetup-debugsource.manifest [ 76s] + /usr/lib/rpm/check-buildroot [ 76s] + /usr/lib/rpm//brp-compress [ 76s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 76s] + /usr/lib/rpm/brp-python-hardlink [ 76s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 [ 76s] Processing files: cryptsetup-1.6.7-3.1.aarch64 [ 76s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 76s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0PgoK [ 76s] [ 76s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.DAQCzh [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd cryptsetup-1.6.7 [ 76s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup [ 76s] + export LICENSEDIR [ 76s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup [ 76s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup [ 76s] + exit 0 [ 76s] Provides: cryptsetup = 1.6.7-3.1 cryptsetup(aarch-64) = 1.6.7-3.1 libcryptsetup.so.4()(64bit) libcryptsetup.so.4(CRYPTSETUP_1.0)(64bit) [ 76s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Requires(post): /sbin/ldconfig [ 76s] Requires(postun): /sbin/ldconfig [ 76s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcryptsetup.so.4()(64bit) libcryptsetup.so.4(CRYPTSETUP_1.0)(64bit) libdevmapper.so.1.02()(64bit) libdevmapper.so.1.02(Base)(64bit) libgcrypt.so.20()(64bit) libgcrypt.so.20(GCRYPT_1.6)(64bit) libpopt.so.0()(64bit) libpopt.so.0(LIBPOPT_0)(64bit) libuuid.so.1()(64bit) libuuid.so.1(UUID_1.0)(64bit) [ 76s] Processing files: cryptsetup-debugsource-1.6.7-3.1.aarch64 [ 76s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 76s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 76s] [ 76s] Provides: cryptsetup-debugsource = 1.6.7-3.1 cryptsetup-debugsource(aarch-64) = 1.6.7-3.1 [ 76s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 76s] Processing files: cryptsetup-devel-1.6.7-3.1.aarch64 [ 76s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.6nk6lZ [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd cryptsetup-1.6.7 [ 76s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-devel [ 76s] + export LICENSEDIR [ 76s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-devel [ 76s] + cp -pr COPYING.LGPL-2.1+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-devel [ 76s] + exit 0 [ 76s] Provides: cryptsetup-devel = 1.6.7-3.1 cryptsetup-devel(aarch-64) = 1.6.7-3.1 pkgconfig(libcryptsetup) = 1.6.7 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Requires: /usr/bin/pkg-config libcryptsetup.so.4()(64bit) [ 76s] Processing files: cryptsetup-locale-1.6.7-3.1.aarch64 [ 76s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.xRMYBH [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd cryptsetup-1.6.7 [ 76s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-locale [ 76s] + export LICENSEDIR [ 76s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-locale [ 76s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-locale [ 76s] + exit 0 [ 76s] Provides: cryptsetup-locale = 1.6.7-3.1 cryptsetup-locale(aarch-64) = 1.6.7-3.1 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Processing files: cryptsetup-doc-1.6.7-3.1.aarch64 [ 76s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hXRKXp [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd cryptsetup-1.6.7 [ 76s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-doc [ 76s] + export LICENSEDIR [ 76s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-doc [ 76s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64/usr/share/licenses/cryptsetup-doc [ 76s] + exit 0 [ 76s] Provides: cryptsetup-doc = 1.6.7-3.1 cryptsetup-doc(aarch-64) = 1.6.7-3.1 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Processing files: cryptsetup-debuginfo-1.6.7-3.1.aarch64 [ 76s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 76s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 76s] [ 76s] warning: File listed twice: /usr/lib/debug/.build-id [ 76s] warning: File listed twice: /usr/lib/debug/.build-id [ 76s] Provides: cryptsetup-debuginfo = 1.6.7-3.1 cryptsetup-debuginfo(aarch-64) = 1.6.7-3.1 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 [ 76s] warning: Could not canonicalize hostname: obsnw03 [ 76s] Wrote: /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-3.1.src.rpm [ 77s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-1.6.7-3.1.aarch64.rpm [ 77s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-debugsource-1.6.7-3.1.aarch64.rpm [ 77s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-devel-1.6.7-3.1.aarch64.rpm [ 77s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-locale-1.6.7-3.1.aarch64.rpm [ 77s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-doc-1.6.7-3.1.aarch64.rpm [ 77s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-debuginfo-1.6.7-3.1.aarch64.rpm [ 77s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.kyMwOh [ 77s] + umask 022 [ 77s] + cd /home/abuild/rpmbuild/BUILD [ 77s] + cd cryptsetup-1.6.7 [ 77s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-3.1.aarch64 [ 77s] + exit 0 [ 77s] ... checking for files with abuild user/group [ 77s] ... creating baselibs [ 78s] [ 78s] obsnw03 finished "build cryptsetup.spec" at Sat Nov 3 01:46:38 UTC 2018. [ 78s] Retried build at Fri Nov 9 14:35:53 2018 returned same result, skipped Retried build at Fri Nov 16 08:27:03 2018 returned same result, skipped Retried build at Fri Nov 16 16:36:48 2018 returned same result, skipped Retried build at Mon Nov 19 01:45:43 2018 returned same result, skipped Retried build at Mon Nov 19 07:43:37 2018 returned same result, skipped Retried build at Fri Nov 30 21:18:37 2018 returned same result, skipped Retried build at Fri Dec 28 10:21:01 2018 returned same result, skipped Retried build at Fri Jan 11 11:18:56 2019 returned same result, skipped Retried build at Sat Mar 16 03:47:00 2019 returned same result, skipped