[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw09 started "build _service:gbs:gperf.spec" at Fri Nov 2 01:31:19 UTC 2018. [ 0s] [ 0s] Building gperf for project 'Tizen:5.0:Unified' repository 'standard' arch 'aarch64' srcmd5 '4a8c1ea3360d4f56ec8e31b53573c521' [ 0s] [ 0s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:gperf.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:gperf.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:gperf.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling libgcc... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/93] installing libmagic-data-5.32-3.39 [ 8s] [2/93] installing setup-0.9-3.1 [ 8s] [3/93] installing filesystem-3.1-3.1 [ 8s] [4/93] installing glibc-2.24-3.17 [ 8s] [5/93] installing bash-3.2.57-3.1 [ 8s] [6/93] installing binutils-2.27-3.19 [ 9s] [7/93] installing cpio-2.11-3.1 [ 9s] [8/93] installing diffutils-3.3-3.1 [ 9s] [9/93] installing findutils-4.3.8-3.64 [ 9s] [10/93] installing hostname-3.20-3.1 [ 9s] [11/93] installing libatomic-6.2.1-3.2 [ 9s] [12/93] installing libattr-2.4.47-3.71 [ 9s] [13/93] installing libbz2-1.0.6-3.64 [ 9s] [14/93] installing libcap-2.24-3.72 [ 9s] [15/93] installing libelf-0.153-3.6 [ 9s] [16/93] installing libext2fs-1.43.4-3.1 [ 9s] [17/93] installing libfreebl3-3.34.1-3.35 [ 9s] [18/93] installing libgcc-6.2.1-3.2 [ 9s] [19/93] installing libgomp-6.2.1-3.2 [ 9s] [20/93] installing libitm-6.2.1-3.2 [ 9s] [21/93] installing libltdl-2.4.2-3.53 [ 9s] [22/93] installing liblua-5.1.5-3.3 [ 9s] [23/93] installing liblzma-5.2.3-3.45 [ 9s] [24/93] installing libpcre-8.41-3.1 [ 9s] [25/93] installing libpopt-1.16-3.3 [ 9s] [26/93] installing libsmack-1.3.1-3.64 [ 9s] [27/93] installing libsmartcols-2.30-3.1 [ 9s] [28/93] installing libsqlite-3.24.0-3.15 [ 10s] [29/93] installing libuuid-2.30-3.1 [ 10s] [30/93] installing m4-1.4.17-3.1 [ 10s] [31/93] installing net-tools-2.0_20121208git-3.1 [ 10s] [32/93] installing nspr-4.12-3.3 [ 10s] [33/93] installing patch-2.7-3.3 [ 10s] [34/93] installing pkg-config-0.28-3.65 [ 10s] [35/93] installing sed-4.1c-3.1 [ 10s] [36/93] installing update-alternatives-1.18.15-3.1 [ 10s] [37/93] installing which-2.20-3.1 [ 10s] [38/93] installing zlib-1.2.11-3.69 [ 10s] [39/93] installing build-compare-2015.04.28-3.10 [ 10s] [40/93] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 15s] [41/93] installing terminfo-base-full-6.1-3.39 [ 15s] [42/93] installing coreutils-6.9-3.1 [ 15s] [43/93] installing cpp-6.2.1-3.2 [ 16s] [44/93] installing gawk-3.1.5-3.1 [ 16s] [45/93] installing gcc-c++-6.2.1-3.2 [ 17s] [46/93] installing grep-2.5.2-3.1 [ 17s] [47/93] installing libacl-2.2.52-3.68 [ 17s] [48/93] installing libasm-0.153-3.6 [ 17s] [49/93] installing libblkid-2.30-3.1 [ 18s] [50/93] installing libstdc++-6.2.1-3.2 [ 18s] [51/93] installing make-4.0-3.5 [ 18s] [52/93] installing nss-certs-3.34.1-3.35 [ 19s] [53/93] installing smack-1.3.1-3.64 [ 19s] [54/93] installing bzip2-1.0.6-3.64 [ 19s] [55/93] installing libgfortran-6.2.1-3.2 [ 19s] [56/93] installing libmagic-5.32-3.39 [ 19s] [57/93] installing libxml2-2.9.7-3.20 [ 19s] [58/93] installing xz-5.2.3-3.45 [ 19s] [59/93] installing libdw-0.153-3.6 [ 19s] [60/93] installing libstdc++-devel-6.2.1-3.2 [ 19s] [61/93] installing file-5.32-3.39 [ 19s] [62/93] installing libmount-2.30-3.1 [ 19s] [63/93] installing linux-glibc-devel-3.10-3.71 [ 19s] [64/93] installing tar-1.17-3.1 [ 20s] [65/93] installing db4-4.8.30.NC-3.61 [ 20s] [66/93] installing glibc-locale-2.24-3.17 [ 20s] [67/93] installing gzip-1.3.12-3.72 [ 20s] [68/93] installing libcc1-6.2.1-3.2 [ 20s] [69/93] installing libfdisk-2.30-3.1 [ 20s] [70/93] installing libubsan-6.2.1-3.2 [ 20s] [71/93] installing pam-1.1.6-3.1 [ 20s] [72/93] installing libncurses6-6.1-3.39 [ 20s] [73/93] installing tzdata-2018c-2.1 [ 20s] [74/93] installing elfutils-0.153-3.6 [ 21s] [75/93] installing libncurses-6.1-3.39 [ 21s] [76/93] installing glibc-devel-2.24-3.17 [ 21s] [77/93] installing less-466-3.1 [ 21s] [78/93] installing libreadline-5.2-3.24 [ 21s] [79/93] installing procps-ng-3.3.15-3.1 [ 21s] [80/93] installing perl-5.20.0-3.7 [ 22s] [81/93] installing gcc-6.2.1-3.2 [ 23s] [82/93] installing build-mkbaselibs-20120927-3.1 [ 23s] [83/93] installing qemu-accel-x86_64-aarch64-0.4-4.1 [ 29s] [84/93] installing autoconf-2.69-3.18 [ 29s] [85/93] installing util-linux-2.30-3.1 [ 30s] [86/93] installing automake-1.15.1-3.37 [ 30s] [87/93] installing util-linux-su-2.30-3.1 [ 30s] [88/93] installing build-20120927-3.1 [ 30s] [89/93] installing libtool-2.4.2-3.53 [ 30s] [90/93] installing nss-3.34.1-3.35 [ 30s] [91/93] installing libsoftokn3-3.34.1-3.35 [ 30s] [92/93] installing rpm-4.11.0.1-3.32 [ 30s] [93/93] installing rpm-build-4.11.0.1-3.32 [ 30s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 30s] now finalizing build dir... [ 31s] build target is aarch64-tizen-linux [ 31s] ----------------------------------------------------------------- [ 31s] I have the following modifications for gperf.spec: [ 31s] 4c4 [ 31s] < Release: 1 [ 31s] --- [ 31s] > Release: 3.1 [ 31s] 49a50 [ 31s] > %changelog [ 31s] ----------------------------------------------------------------- [ 31s] ----- building gperf.spec (user abuild) [ 31s] ----------------------------------------------------------------- [ 31s] ----------------------------------------------------------------- [ 31s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.0:Unified/standard/4a8c1ea3360d4f56ec8e31b53573c521-gperf' -ba /home/abuild/rpmbuild/SOURCES/gperf.spec [ 31s] Building target platforms: aarch64-tizen-linux [ 31s] Building for target aarch64-tizen-linux [ 31s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.wAnf2U [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + rm -rf gperf-3.0.4 [ 31s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/gperf-3.0.4.tar.gz [ 31s] + /bin/tar -xf - [ 31s] + STATUS=0 [ 31s] + '[' 0 -ne 0 ']' [ 31s] + cd gperf-3.0.4 [ 31s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 31s] + cp /home/abuild/rpmbuild/SOURCES/gperf.manifest . [ 31s] + exit 0 [ 31s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zrirc2 [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd gperf-3.0.4 [ 31s] ++ uname -m [ 31s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 31s] + ref=/usr/lib/rpm [ 31s] + for s in guess sub [ 31s] ++ find -maxdepth 8 -name config.guess [ 31s] + for s in guess sub [ 31s] ++ find -maxdepth 8 -name config.sub [ 31s] + LANG=C [ 31s] + export LANG [ 31s] + unset DISPLAY [ 31s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 31s] + export CFLAGS [ 31s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 31s] + export CXXFLAGS [ 31s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 31s] + export FFLAGS [ 31s] + LDFLAGS= [ 31s] + export LDFLAGS [ 31s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 31s] + export CFLAGS [ 31s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 31s] + export CXXFLAGS [ 31s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 31s] + export FFLAGS [ 31s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 31s] checking whether make sets $(MAKE)... yes [ 31s] configure: creating ./config.status [ 32s] config.status: creating Makefile [ 32s] === configuring in lib (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib) [ 32s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 32s] checking whether make sets $(MAKE)... yes [ 32s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 32s] checking for C compiler default output file name... a.out [ 32s] checking whether the C compiler works... yes [ 32s] checking whether we are cross compiling... no [ 32s] checking for suffix of executables... [ 32s] checking for suffix of object files... o [ 32s] checking whether we are using the GNU C compiler... yes [ 32s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 32s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 32s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 32s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 32s] checking whether we are using the GNU C++ compiler... yes [ 32s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 32s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 32s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 32s] checking for ranlib... ranlib [ 32s] checking for a BSD compatible install... /bin/install -c [ 32s] configure: creating ./config.status [ 33s] config.status: creating Makefile [ 33s] === configuring in src (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src) [ 33s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 33s] checking whether make sets $(MAKE)... yes [ 33s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 33s] checking for C compiler default output file name... a.out [ 33s] checking whether the C compiler works... yes [ 33s] checking whether we are cross compiling... no [ 33s] checking for suffix of executables... [ 33s] checking for suffix of object files... o [ 33s] checking whether we are using the GNU C compiler... yes [ 33s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 33s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 33s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 33s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 33s] checking whether we are using the GNU C++ compiler... yes [ 33s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 33s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 33s] checking for a BSD compatible install... /bin/install -c [ 33s] checking for stack-allocated variable-size arrays... yes [ 33s] checking for rand in -lm... yes [ 33s] configure: creating ./config.status [ 33s] config.status: creating Makefile [ 33s] config.status: creating config.h [ 34s] === configuring in tests (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests) [ 34s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 34s] checking whether make sets $(MAKE)... yes [ 34s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 34s] checking for C compiler default output file name... a.out [ 34s] checking whether the C compiler works... yes [ 34s] checking whether we are cross compiling... no [ 34s] checking for suffix of executables... [ 34s] checking for suffix of object files... o [ 34s] checking whether we are using the GNU C compiler... yes [ 34s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 34s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 34s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 34s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 34s] checking whether we are using the GNU C++ compiler... yes [ 34s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 34s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 34s] configure: creating ./config.status [ 34s] config.status: creating Makefile [ 34s] === configuring in doc (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc) [ 34s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 35s] checking whether make sets $(MAKE)... yes [ 35s] checking for a BSD compatible install... /bin/install -c [ 35s] configure: creating ./config.status [ 35s] config.status: creating Makefile [ 35s] + make -j4 [ 35s] cd lib; make all [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 35s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -c ./getopt.c [ 35s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -c ./getopt1.c [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -c ./getline.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -c ./hash.cc [ 35s] rm -f libgp.a [ 35s] ar rc libgp.a getopt.o getopt1.o getline.o hash.o [ 35s] ranlib libgp.a [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 35s] cd src; make all [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./version.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./positions.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./options.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./keyword.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./keyword-list.cc [ 35s] In file included from ./keyword-list.h:78:0, [ 35s] from ./keyword-list.cc:22: [ 35s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 35s] ./keyword-list.icc:50:52: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 35s] return *reinterpret_cast(&_cdr); [ 35s] ^ [ 35s] ./options.cc: In member function 'void Options::print_options() const': [ 35s] ./options.cc:282:27: warning: suggest parentheses around '&&' within '||' [-Wparentheses] [ 35s] if (*arg >= 'A' && *arg <= 'Z' || *arg >= 'a' && *arg <= 'z') [ 35s] ~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 35s] ./options.cc:294:34: warning: suggest parentheses around '&&' within '||' [-Wparentheses] [ 35s] while (*arg >= 'A' && *arg <= 'Z' || *arg >= 'a' && *arg <= 'z' || *arg == '-'); [ 35s] ~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./input.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./bool-array.cc [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./hash-table.cc [ 35s] In file included from ./keyword-list.h:78:0, [ 35s] from ./input.h:28, [ 35s] from ./input.cc:22: [ 35s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 35s] ./keyword-list.icc:50:52: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 35s] return *reinterpret_cast(&_cdr); [ 35s] ^ [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./search.cc [ 35s] In file included from ./keyword-list.h:78:0, [ 35s] from ./search.h:27, [ 35s] from ./search.cc:22: [ 35s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 35s] ./keyword-list.icc:50:52: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 35s] return *reinterpret_cast(&_cdr); [ 35s] ^ [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./output.cc [ 35s] In file included from ./keyword-list.h:78:0, [ 35s] from ./output.h:27, [ 35s] from ./output.cc:22: [ 35s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 35s] ./keyword-list.icc:50:52: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 35s] return *reinterpret_cast(&_cdr); [ 35s] ^ [ 35s] ./search.cc: In member function 'void Search::prepare()': [ 35s] ./search.cc:162:6: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 35s] if (option[SEVENBIT]) [ 35s] ^ [ 35s] ./search.cc: In member function 'void Search::find_positions()': [ 35s] ./search.cc:417:16: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 35s] if (current.contains (i2) && !mandatory.contains (i2) && i2 != i1) [ 35s] ^ [ 35s] ./search.cc:415:12: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 35s] if (current.contains (i1) && !mandatory.contains (i1)) [ 35s] ^ [ 35s] ./search.cc: In member function 'void Search::optimize()': [ 35s] ./search.cc:1638:6: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 35s] if (_alpha_unify) [ 35s] ^ [ 35s] ./output.cc: In member function 'void Output::output_lookup_array() const': [ 35s] ./output.cc:1304:73: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Wformat=] [ 35s] dup_ptr->hash_value, dup_ptr->index, dup_ptr->count); [ 35s] ^ [ 35s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -I. -I./../lib -c ./main.cc [ 35s] In file included from ./keyword-list.h:78:0, [ 35s] from ./input.h:28, [ 35s] from ./main.cc:25: [ 35s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 35s] ./keyword-list.icc:50:52: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 35s] return *reinterpret_cast(&_cdr); [ 35s] ^ [ 36s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -o gperf version.o positions.o options.o keyword.o keyword-list.o input.o bool-array.o hash-table.o search.o output.o main.o ../lib/libgp.a -lm [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 36s] cd tests; make all [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 36s] make[1]: Nothing to be done for 'all'. [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 36s] cd doc; make all [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 36s] make[1]: Nothing to be done for 'all'. [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 36s] + exit 0 [ 36s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.fWxRBo [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd gperf-3.0.4 [ 36s] + LANG=C [ 36s] + export LANG [ 36s] + unset DISPLAY [ 36s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 [ 36s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 [ 36s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 install [ 36s] cd lib; /bin/make install [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 36s] make[1]: Nothing to be done for 'install'. [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 36s] cd src; /bin/make install [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 36s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/bin [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/bin [ 36s] /bin/install -c gperf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/bin/gperf [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 36s] cd tests; /bin/make install [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 36s] make[1]: Nothing to be done for 'install'. [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 36s] cd doc; /bin/make install [ 36s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 36s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/info [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/info [ 36s] /bin/install -c -m 644 ./gperf.info /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/info/gperf.info [ 36s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/man/man1 [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/man [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/man/man1 [ 36s] /bin/install -c -m 644 ./gperf.1 /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/man/man1/gperf.1 [ 36s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/ [ 36s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc [ 36s] /bin/install -c -m 644 ./gperf.html /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc//gperf.html [ 36s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 36s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/info/dir [ 36s] + find /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 -regex '.*\.la$' [ 36s] + xargs rm -f -- [ 36s] + find /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 -regex '.*\.a$' [ 36s] + xargs rm -f -- [ 36s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/gperf.html [ 36s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/gperf-3.0.4 [ 36s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/bin/gperf [ 36s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 36s] 588 blocks [ 36s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gperf-3.0.4/gperf-debuginfo.manifest [ 36s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gperf-3.0.4/gperf-debugsource.manifest [ 36s] + /usr/lib/rpm/check-buildroot [ 36s] + /usr/lib/rpm//brp-compress [ 36s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 37s] + /usr/lib/rpm/brp-python-hardlink [ 37s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 [ 37s] Processing files: gperf-3.0.4-3.1.aarch64 [ 37s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 37s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 37s] [ 37s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.VoLd3M [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd gperf-3.0.4 [ 37s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/packages/gperf [ 37s] + export DOCDIR [ 37s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/packages/gperf [ 37s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/packages/gperf [ 37s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/packages/gperf [ 37s] + cp -pr doc/gperf.html /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/doc/packages/gperf [ 37s] + exit 0 [ 37s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.tl5SDb [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd gperf-3.0.4 [ 37s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/licenses/gperf [ 37s] + export LICENSEDIR [ 37s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/licenses/gperf [ 37s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64/usr/share/licenses/gperf [ 37s] + exit 0 [ 37s] Provides: gperf = 3.0.4-3.1 gperf(aarch-64) = 3.0.4-3.1 [ 37s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 37s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.8)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) [ 37s] Processing files: gperf-debugsource-3.0.4-3.1.aarch64 [ 37s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 37s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 37s] [ 37s] Provides: gperf-debugsource = 3.0.4-3.1 gperf-debugsource(aarch-64) = 3.0.4-3.1 [ 37s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 37s] Processing files: gperf-debuginfo-3.0.4-3.1.aarch64 [ 37s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 37s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 37s] [ 37s] Provides: gperf-debuginfo = 3.0.4-3.1 gperf-debuginfo(aarch-64) = 3.0.4-3.1 [ 37s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 37s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 [ 37s] warning: Could not canonicalize hostname: obsnw09 [ 37s] Wrote: /home/abuild/rpmbuild/SRPMS/gperf-3.0.4-3.1.src.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gperf-3.0.4-3.1.aarch64.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gperf-debugsource-3.0.4-3.1.aarch64.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gperf-debuginfo-3.0.4-3.1.aarch64.rpm [ 37s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MREDJe [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd gperf-3.0.4 [ 37s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-3.1.aarch64 [ 37s] + exit 0 [ 37s] ... checking for files with abuild user/group [ 37s] ... creating baselibs [ 38s] [ 38s] obsnw09 finished "build gperf.spec" at Fri Nov 2 01:31:57 UTC 2018. [ 38s] Retried build at Sat Nov 3 01:04:21 2018 returned same result, skipped Retried build at Fri Nov 9 13:51:08 2018 returned same result, skipped Retried build at Fri Nov 16 15:44:58 2018 returned same result, skipped Retried build at Fri Nov 30 20:08:06 2018 returned same result, skipped Retried build at Fri Jan 11 10:40:16 2019 returned same result, skipped Retried build at Sat Mar 16 02:57:09 2019 returned same result, skipped