[ 1s] Memory limit set to 82441344KB [ 1s] Using BUILD_ROOT=/var/cache/build/root_1 [ 1s] Using BUILD_ARCH=aarch64 [ 1s] [ 1s] [ 1s] obsnw04 started "build _service:gbs:sensor-hal-tm2.spec" at Sat Nov 3 01:47:38 UTC 2018. [ 1s] [ 1s] Building sensor-hal-tm2 for project 'Tizen:5.0:Unified' repository 'standard' arch 'aarch64' srcmd5 '0b63cc88470d1b8a48ad0b36b6055df8' [ 1s] [ 1s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:sensor-hal-tm2.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:sensor-hal-tm2.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:sensor-hal-tm2.spec build rpmlint-Factory ... [ 1s] copying qemu [ 4s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 4s] [ 4s] registering binfmt handlers for cross build [ 4s] interpreter for 'aarch64' is -1 [ 4s] write: Invalid argument [ 4s] /proc/sys/fs/binfmt_misc/register: write failed [ 4s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 4s] [ 4s] /.build/qemu-reg: No such file or directory [ 4s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 4s] /usr/lib/build/qemu-reg: No such file or directory [ 4s] /usr/lib/build/qemu-reg: binfmt registration failed [ 5s] cycle: libsoftokn3 -> nss [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/40] preinstalling libmagic-data... [ 7s] [2/40] preinstalling libncurses... [ 7s] [3/40] preinstalling setup... [ 7s] [4/40] preinstalling filesystem... [ 7s] [5/40] preinstalling glibc... [ 7s] [6/40] preinstalling bash... [ 7s] [7/40] preinstalling diffutils... [ 7s] [8/40] preinstalling grep... [ 7s] [9/40] preinstalling libattr... [ 7s] [10/40] preinstalling libbz2... [ 7s] [11/40] preinstalling libcap... [ 7s] [12/40] preinstalling libelf... [ 7s] [13/40] preinstalling libfreebl3... [ 7s] [14/40] preinstalling libgcc... [ 7s] [15/40] preinstalling liblua... [ 7s] [16/40] preinstalling liblzma... [ 7s] [17/40] preinstalling libpopt... [ 7s] [18/40] preinstalling libreadline... [ 7s] [19/40] preinstalling libsmack... [ 7s] [20/40] preinstalling libsqlite... [ 7s] [21/40] preinstalling libuuid... [ 7s] [22/40] preinstalling nspr... [ 8s] [23/40] preinstalling sed... [ 8s] [24/40] preinstalling zlib... [ 8s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 14s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 15s] [27/40] preinstalling coreutils... [ 15s] [28/40] preinstalling libacl... [ 15s] [29/40] preinstalling libblkid... [ 15s] [30/40] preinstalling smack... [ 15s] [31/40] preinstalling bzip2... [ 15s] [32/40] preinstalling libmagic... [ 15s] [33/40] preinstalling libxml2... [ 15s] [34/40] preinstalling libmount... [ 15s] [35/40] preinstalling tar... [ 15s] [36/40] preinstalling util-linux... [ 15s] [37/40] preinstalling util-linux-su... [ 15s] [38/40] preinstalling nss... [ 15s] [39/40] preinstalling libsoftokn3... [ 15s] [40/40] preinstalling rpm... [ 15s] [ 15s] running qemu-linux-user-x86_64-cross postinstall script [ 15s] running qemu-accel-x86_64-aarch64 postinstall script [ 15s] running setup postinstall script [ 15s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 15s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 15s] initializing rpm db... [ 15s] reordering...cycle: libsoftokn3 -> nss [ 15s] breaking dependency nss -> libsoftokn3 [ 15s] done [ 16s] [1/102] installing libmagic-data-5.32-3.43 [ 17s] [2/102] installing sensor-hal-devel-4.0.3-3.1 [ 17s] [3/102] installing setup-0.9-3.1 [ 17s] [4/102] installing filesystem-3.1-3.1 [ 17s] [5/102] installing glibc-2.24-3.18 [ 18s] [6/102] installing bash-3.2.57-3.1 [ 18s] [7/102] installing binutils-2.27-3.21 [ 19s] [8/102] installing capi-base-common-0.4.32-3.1 [ 19s] [9/102] installing cpio-2.11-3.1 [ 19s] [10/102] installing diffutils-3.3-3.1 [ 20s] [11/102] installing findutils-4.3.8-3.68 [ 20s] [12/102] installing hostname-3.20-3.1 [ 20s] [13/102] installing libatomic-6.2.1-3.2 [ 20s] [14/102] installing libattr-2.4.47-3.75 [ 21s] [15/102] installing libbz2-1.0.6-3.68 [ 21s] [16/102] installing libcap-2.24-3.76 [ 21s] [17/102] installing libelf-0.153-3.8 [ 21s] [18/102] installing libexpat-2.2.5-3.58 [ 21s] [19/102] installing libext2fs-1.43.4-3.1 [ 21s] [20/102] installing libfreebl3-3.34.1-3.39 [ 22s] [21/102] installing libgcc-6.2.1-3.2 [ 22s] [22/102] installing libgomp-6.2.1-3.2 [ 22s] [23/102] installing libitm-6.2.1-3.2 [ 22s] [24/102] installing libltdl-2.4.2-3.55 [ 22s] [25/102] installing liblua-5.1.5-3.3 [ 23s] [26/102] installing liblzma-5.2.3-3.49 [ 23s] [27/102] installing libpcre-8.41-3.1 [ 23s] [28/102] installing libpopt-1.16-3.3 [ 23s] [29/102] installing libsmack-1.3.1-3.68 [ 23s] [30/102] installing libsmartcols-2.30-3.1 [ 24s] [31/102] installing libsqlite-3.24.0-3.19 [ 24s] [32/102] installing libuuid-2.30-3.1 [ 25s] [33/102] installing m4-1.4.17-3.1 [ 25s] [34/102] installing net-tools-2.0_20121208git-3.1 [ 25s] [35/102] installing nspr-4.12-3.3 [ 26s] [36/102] installing patch-2.7-3.3 [ 26s] [37/102] installing pkg-config-0.28-3.69 [ 26s] [38/102] installing sed-4.1c-3.1 [ 26s] [39/102] installing update-alternatives-1.18.15-3.1 [ 27s] [40/102] installing which-2.20-3.1 [ 27s] [41/102] installing zlib-1.2.11-3.73 [ 27s] [42/102] installing build-compare-2015.04.28-3.13 [ 27s] [43/102] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 35s] [44/102] installing terminfo-base-full-6.1-3.43 [ 36s] [45/102] installing capi-base-common-devel-0.4.32-3.1 [ 38s] [46/102] installing coreutils-6.9-3.1 [ 41s] [47/102] installing cpp-6.2.1-3.2 [ 43s] [48/102] installing gawk-3.1.5-3.1 [ 43s] [49/102] installing gcc-c++-6.2.1-3.2 [ 44s] [50/102] installing grep-2.5.2-3.1 [ 45s] [51/102] installing libacl-2.2.52-3.72 [ 45s] [52/102] installing libasm-0.153-3.8 [ 46s] [53/102] installing libblkid-2.30-3.1 [ 47s] [54/102] installing libopenssl-1.0.2o-3.33 [ 47s] [55/102] installing libstdc++-6.2.1-3.2 [ 48s] [56/102] installing make-4.0-3.6 [ 49s] [57/102] installing nss-certs-3.34.1-3.39 [ 49s] [58/102] installing smack-1.3.1-3.68 [ 50s] [59/102] installing bzip2-1.0.6-3.68 [ 50s] [60/102] installing libgfortran-6.2.1-3.2 [ 51s] [61/102] installing libmagic-5.32-3.43 [ 51s] [62/102] installing libxml2-2.9.7-3.23 [ 52s] [63/102] installing xz-5.2.3-3.49 [ 53s] [64/102] installing libdw-0.153-3.8 [ 53s] [65/102] installing libstdc++-devel-6.2.1-3.2 [ 55s] [66/102] installing file-5.32-3.43 [ 55s] [67/102] installing libmount-2.30-3.1 [ 56s] [68/102] installing linux-glibc-devel-3.10-3.75 [ 57s] [69/102] installing tar-1.17-3.1 [ 59s] [70/102] installing db4-4.8.30.NC-3.65 [ 59s] [71/102] installing glibc-locale-2.24-3.18 [ 61s] [72/102] installing gzip-1.3.12-3.76 [ 61s] [73/102] installing libcc1-6.2.1-3.2 [ 62s] [74/102] installing libfdisk-2.30-3.1 [ 63s] [75/102] installing libubsan-6.2.1-3.2 [ 64s] [76/102] installing pam-1.1.6-3.1 [ 64s] [77/102] installing libncurses6-6.1-3.43 [ 65s] [78/102] installing tzdata-2018c-2.1 [ 67s] [79/102] installing libdlog-5.0.2-3.1 [ 68s] /var/tmp/rpm-tmp.dAKXjE: line 2: systemctl: command not found [ 68s] Running libdlog %posttrans script [ 68s] [80/102] installing elfutils-0.153-3.8 [ 69s] [81/102] installing libarchive-3.3.2-3.1 [ 70s] [82/102] installing libncurses-6.1-3.43 [ 71s] [83/102] installing glibc-devel-2.24-3.18 [ 73s] [84/102] installing less-466-3.1 [ 74s] [85/102] installing libreadline-5.2-3.27 [ 75s] [86/102] installing procps-ng-3.3.15-3.1 [ 76s] [87/102] installing libdlog-devel-5.0.2-3.1 [ 76s] [88/102] installing perl-5.20.0-3.9 [ 79s] [89/102] installing cmake-3.9.4-3.1 [ 82s] [90/102] installing gcc-6.2.1-3.2 [ 83s] [91/102] installing build-mkbaselibs-20120927-3.1 [ 84s] [92/102] installing qemu-accel-x86_64-aarch64-0.4-4.1 [ 106s] [93/102] installing autoconf-2.69-3.23 [ 106s] [94/102] installing util-linux-2.30-3.1 [ 108s] [95/102] installing automake-1.15.1-3.39 [ 109s] [96/102] installing util-linux-su-2.30-3.1 [ 109s] [97/102] installing build-20120927-3.1 [ 110s] [98/102] installing libtool-2.4.2-3.55 [ 110s] [99/102] installing nss-3.34.1-3.39 [ 110s] [100/102] installing libsoftokn3-3.34.1-3.39 [ 111s] [101/102] installing rpm-4.11.0.1-3.35 [ 111s] [102/102] installing rpm-build-4.11.0.1-3.35 [ 112s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 112s] now finalizing build dir... [ 113s] build target is aarch64-tizen-linux [ 113s] ----------------------------------------------------------------- [ 113s] I have the following modifications for sensor-hal-tm2.spec: [ 113s] 5c5 [ 113s] < Release: 0 [ 113s] --- [ 113s] > Release: 3.1 [ 113s] ----------------------------------------------------------------- [ 113s] ----- building sensor-hal-tm2.spec (user abuild) [ 113s] ----------------------------------------------------------------- [ 113s] ----------------------------------------------------------------- [ 113s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.0:Unified/standard/0b63cc88470d1b8a48ad0b36b6055df8-sensor-hal-tm2' -ba /home/abuild/rpmbuild/SOURCES/sensor-hal-tm2.spec [ 113s] Building target platforms: aarch64-tizen-linux [ 113s] Building for target aarch64-tizen-linux [ 113s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.FX6FU6 [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + rm -rf sensor-hal-tm2-1.0.4 [ 113s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/sensor-hal-tm2-1.0.4.tar.gz [ 113s] + /bin/tar -xf - [ 113s] + STATUS=0 [ 113s] + '[' 0 -ne 0 ']' [ 113s] + cd sensor-hal-tm2-1.0.4 [ 113s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 113s] + exit 0 [ 113s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.PUlgD9 [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd sensor-hal-tm2-1.0.4 [ 113s] ++ uname -m [ 113s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 113s] + ref=/usr/lib/rpm [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.guess [ 113s] + for s in guess sub [ 113s] ++ find -maxdepth 8 -name config.sub [ 113s] + LANG=C [ 113s] + export LANG [ 113s] + unset DISPLAY [ 113s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 113s] + export CFLAGS [ 113s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 113s] + export CXXFLAGS [ 113s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 113s] + export FFLAGS [ 113s] + LDFLAGS= [ 113s] + export LDFLAGS [ 113s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 113s] + export CFLAGS [ 113s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 113s] + export CXXFLAGS [ 113s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 113s] + export FFLAGS [ 113s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 114s] -- The CXX compiler identification is GNU 6.2.1 [ 114s] -- Check for working CXX compiler: /bin/c++ [ 114s] -- Check for working CXX compiler: /bin/c++ -- works [ 114s] -- Detecting CXX compiler ABI info [ 114s] -- Detecting CXX compiler ABI info - done [ 114s] -- Detecting CXX compile features [ 114s] -- Detecting CXX compile features - done [ 114s] FLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections [ 114s] FLAGS: -Wl,--gc-section -Wl,--print-gc-section [ 114s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 114s] -- Checking for module 'dlog' [ 115s] -- Found dlog, version 1.0 [ 115s] Sources: /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/create.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/util.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/accel/accel_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/gyro/gyro_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/proxi/proxi_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/light/light_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/geomag/geomag_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/pressure/pressure_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/ultraviolet/uv_device.cpp [ 115s] -- Configuring done [ 115s] -- Generating done [ 115s] CMake Warning: [ 115s] Manually-specified variables were not used by the project: [ 115s] [ 115s] INCLUDE_INSTALL_DIR [ 115s] LIB_INSTALL_DIR [ 115s] LIB_SUFFIX [ 115s] SHARE_INSTALL_PREFIX [ 115s] SYSCONF_INSTALL_DIR [ 115s] [ 115s] [ 115s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 [ 115s] + make -j4 [ 115s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 -B/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 --check-build-system CMakeFiles/Makefile.cmake 0 [ 115s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles/progress.marks [ 115s] make -f CMakeFiles/Makefile2 all [ 115s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 115s] make -f CMakeFiles/sensor-hal-tm2.dir/build.make CMakeFiles/sensor-hal-tm2.dir/depend [ 115s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 115s] cd /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles/sensor-hal-tm2.dir/DependInfo.cmake --color= [ 115s] Scanning dependencies of target sensor-hal-tm2 [ 115s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 115s] make -f CMakeFiles/sensor-hal-tm2.dir/build.make CMakeFiles/sensor-hal-tm2.dir/build [ 115s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 115s] [ 10%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/create.cpp.o [ 115s] [ 30%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/accel/accel_device.cpp.o [ 115s] [ 30%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/gyro/gyro_device.cpp.o [ 115s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/create.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/create.cpp [ 115s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/accel/accel_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/accel/accel_device.cpp [ 115s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/gyro/gyro_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/gyro/gyro_device.cpp [ 115s] [ 40%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/util.cpp.o [ 115s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/util.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/util.cpp [ 116s] [ 50%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/proxi/proxi_device.cpp.o [ 116s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/proxi/proxi_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/proxi/proxi_device.cpp [ 116s] [ 60%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/light/light_device.cpp.o [ 116s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/light/light_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/light/light_device.cpp [ 116s] [ 70%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/geomag/geomag_device.cpp.o [ 116s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/geomag/geomag_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/geomag/geomag_device.cpp [ 116s] [ 80%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/pressure/pressure_device.cpp.o [ 116s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/pressure/pressure_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/pressure/pressure_device.cpp [ 116s] [ 90%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/ultraviolet/uv_device.cpp.o [ 116s] /bin/c++ -DENABLE_ACCEL -DENABLE_GEOMAG -DENABLE_GYRO -DENABLE_HRM -DENABLE_HRM_RAW -DENABLE_LIGHT -DENABLE_PRESSURE -DENABLE_PROXIMITY -DENABLE_ULTRAVIOLET -Dsensor_hal_tm2_EXPORTS -I/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -fPIC -o CMakeFiles/sensor-hal-tm2.dir/src/ultraviolet/uv_device.cpp.o -c /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/src/ultraviolet/uv_device.cpp [ 117s] [100%] Linking CXX shared library libsensor-hal-tm2.so [ 117s] /usr/bin/cmake -E cmake_link_script CMakeFiles/sensor-hal-tm2.dir/link.txt --verbose=1 [ 117s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -I/usr/include/dlog -fPIC -shared -Wl,-soname,libsensor-hal-tm2.so -o libsensor-hal-tm2.so CMakeFiles/sensor-hal-tm2.dir/src/create.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/util.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/accel/accel_device.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/gyro/gyro_device.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/proxi/proxi_device.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/light/light_device.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/geomag/geomag_device.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/pressure/pressure_device.cpp.o CMakeFiles/sensor-hal-tm2.dir/src/ultraviolet/uv_device.cpp.o -ldlog [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] [100%] Built target sensor-hal-tm2 [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles 0 [ 117s] + exit 0 [ 117s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.D4YRon [ 117s] + umask 022 [ 117s] + cd /home/abuild/rpmbuild/BUILD [ 117s] + cd sensor-hal-tm2-1.0.4 [ 117s] + LANG=C [ 117s] + export LANG [ 117s] + unset DISPLAY [ 117s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 [ 117s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 [ 117s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 install [ 117s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 -B/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 --check-build-system CMakeFiles/Makefile.cmake 0 [ 117s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles/progress.marks [ 117s] /bin/make -f CMakeFiles/Makefile2 all [ 117s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] /bin/make -f CMakeFiles/sensor-hal-tm2.dir/build.make CMakeFiles/sensor-hal-tm2.dir/depend [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] cd /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles/sensor-hal-tm2.dir/DependInfo.cmake --color= [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] /bin/make -f CMakeFiles/sensor-hal-tm2.dir/build.make CMakeFiles/sensor-hal-tm2.dir/build [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] make[2]: Nothing to be done for 'CMakeFiles/sensor-hal-tm2.dir/build'. [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] [100%] Built target sensor-hal-tm2 [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/CMakeFiles 0 [ 117s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 117s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] make[1]: Nothing to be done for 'preinstall'. [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4' [ 117s] Install the project... [ 117s] /usr/bin/cmake -P cmake_install.cmake [ 117s] -- Install configuration: "" [ 117s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/lib64/sensor/libsensor-hal-tm2.so [ 117s] + rm -f /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/share/info/dir [ 117s] + find /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 -regex '.*\.la$' [ 117s] + xargs rm -f -- [ 117s] + find /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 -regex '.*\.a$' [ 117s] + xargs rm -f -- [ 117s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/lib64/udev/rules.d [ 117s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/99-sensor.rules /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/lib64/udev/rules.d [ 117s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/99-sensorhub.rules /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/lib64/udev/rules.d [ 117s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4 [ 117s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/lib64/sensor/libsensor-hal-tm2.so [ 118s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 118s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 118s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 118s] 159 blocks [ 118s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/sensor-hal-tm2-debuginfo.manifest [ 119s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.4/sensor-hal-tm2-debugsource.manifest [ 119s] + /usr/lib/rpm/check-buildroot [ 119s] + /usr/lib/rpm//brp-compress [ 119s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 119s] + /usr/lib/rpm/brp-python-hardlink [ 119s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 [ 119s] Processing files: sensor-hal-tm2-1.0.4-3.1.aarch64 [ 119s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 119s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 119s] [ 119s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.XLMs8G [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd sensor-hal-tm2-1.0.4 [ 119s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/share/licenses/sensor-hal-tm2 [ 119s] + export LICENSEDIR [ 119s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/share/licenses/sensor-hal-tm2 [ 119s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64/usr/share/licenses/sensor-hal-tm2 [ 119s] + exit 0 [ 119s] Provides: libsensor-hal-tm2.so()(64bit) sensor-hal-tm2 = 1.0.4-3.1 sensor-hal-tm2(aarch-64) = 1.0.4-3.1 [ 119s] Requires(interp): /bin/sh /bin/sh [ 119s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 119s] Requires(post): /bin/sh [ 119s] Requires(postun): /bin/sh [ 119s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdlog.so.0()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.14)(64bit) libstdc++.so.6(GLIBCXX_3.4.20)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 119s] Processing files: sensor-hal-tm2-debugsource-1.0.4-3.1.aarch64 [ 119s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 119s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 119s] [ 119s] Provides: sensor-hal-tm2-debugsource = 1.0.4-3.1 sensor-hal-tm2-debugsource(aarch-64) = 1.0.4-3.1 [ 119s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 119s] Processing files: sensor-hal-tm2-debuginfo-1.0.4-3.1.aarch64 [ 119s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 119s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 119s] [ 119s] Provides: sensor-hal-tm2-debuginfo = 1.0.4-3.1 sensor-hal-tm2-debuginfo(aarch-64) = 1.0.4-3.1 [ 119s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 119s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 [ 119s] warning: Could not canonicalize hostname: obsnw04 [ 119s] Wrote: /home/abuild/rpmbuild/SRPMS/sensor-hal-tm2-1.0.4-3.1.src.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/sensor-hal-tm2-1.0.4-3.1.aarch64.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/sensor-hal-tm2-debugsource-1.0.4-3.1.aarch64.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/sensor-hal-tm2-debuginfo-1.0.4-3.1.aarch64.rpm [ 119s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.2NdI5l [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd sensor-hal-tm2-1.0.4 [ 119s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.4-3.1.aarch64 [ 119s] + exit 0 [ 119s] ... checking for files with abuild user/group [ 120s] ... creating baselibs [ 121s] [ 121s] obsnw04 finished "build sensor-hal-tm2.spec" at Sat Nov 3 01:49:38 UTC 2018. [ 121s] Retried build at Fri Nov 9 14:36:37 2018 returned same result, skipped Retried build at Tue Nov 13 09:23:52 2018 returned same result, skipped Retried build at Thu Nov 15 15:40:06 2018 returned same result, skipped Retried build at Fri Nov 16 08:28:04 2018 returned same result, skipped Retried build at Fri Nov 16 16:37:38 2018 returned same result, skipped Retried build at Wed Nov 28 15:12:17 2018 returned same result, skipped Retried build at Fri Nov 30 21:18:19 2018 returned same result, skipped Retried build at Fri Dec 28 05:47:21 2018 returned same result, skipped Retried build at Fri Jan 11 11:19:25 2019 returned same result, skipped Retried build at Fri Jan 18 06:28:53 2019 returned same result, skipped Retried build at Thu Feb 21 08:56:37 2019 returned same result, skipped Retried build at Sat Mar 16 03:48:05 2019 returned same result, skipped