[ 1s] Memory limit set to 87946512KB [ 1s] Using BUILD_ROOT=/var/cache/build/root_2 [ 1s] Using BUILD_ARCH=aarch64 [ 1s] [ 1s] [ 1s] obspw13 started "build _service:gbs:xmlto.spec" at Sat Nov 3 01:08:22 UTC 2018. [ 1s] [ 1s] Building xmlto for project 'Tizen:5.0:Unified' repository 'standard' arch 'aarch64' srcmd5 '6e3846116d69e377c7be1ed1eaa8c2d6' [ 1s] [ 1s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:xmlto.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:xmlto.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:xmlto.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling libgcc... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/104] installing libmagic-data-5.32-3.43 [ 9s] [2/104] installing setup-0.9-3.1 [ 9s] [3/104] installing filesystem-3.1-3.1 [ 9s] [4/104] installing glibc-2.24-3.18 [ 9s] [5/104] installing bash-3.2.57-3.1 [ 9s] [6/104] installing binutils-2.27-3.21 [ 10s] [7/104] installing cpio-2.11-3.1 [ 10s] [8/104] installing diffutils-3.3-3.1 [ 10s] [9/104] installing fdupes-1.40-3.76 [ 10s] [10/104] installing findutils-4.3.8-3.68 [ 10s] [11/104] installing hostname-3.20-3.1 [ 10s] [12/104] installing libatomic-6.2.1-3.2 [ 10s] [13/104] installing libattr-2.4.47-3.75 [ 10s] [14/104] installing libbz2-1.0.6-3.68 [ 10s] [15/104] installing libcap-2.24-3.76 [ 10s] [16/104] installing libelf-0.153-3.8 [ 10s] [17/104] installing libext2fs-1.43.4-3.1 [ 10s] [18/104] installing libfreebl3-3.34.1-3.39 [ 10s] [19/104] installing libgcc-6.2.1-3.2 [ 10s] [20/104] installing libgomp-6.2.1-3.2 [ 11s] [21/104] installing libgpg-error-1.27-3.1 [ 11s] [22/104] installing libitm-6.2.1-3.2 [ 11s] [23/104] installing libltdl-2.4.2-3.55 [ 11s] [24/104] installing liblua-5.1.5-3.3 [ 11s] [25/104] installing liblzma-5.2.3-3.49 [ 11s] [26/104] installing libpcre-8.41-3.1 [ 11s] [27/104] installing libpopt-1.16-3.3 [ 11s] [28/104] installing libsmack-1.3.1-3.68 [ 11s] [29/104] installing libsmartcols-2.30-3.1 [ 11s] [30/104] installing libsqlite-3.24.0-3.19 [ 11s] [31/104] installing libuuid-2.30-3.1 [ 11s] [32/104] installing m4-1.4.17-3.1 [ 11s] [33/104] installing net-tools-2.0_20121208git-3.1 [ 11s] [34/104] installing nspr-4.12-3.3 [ 11s] [35/104] installing patch-2.7-3.3 [ 11s] [36/104] installing pkg-config-0.28-3.69 [ 11s] [37/104] installing sed-4.1c-3.1 [ 11s] [38/104] installing update-alternatives-1.18.15-3.1 [ 11s] [39/104] installing which-2.20-3.1 [ 11s] [40/104] installing zlib-1.2.11-3.73 [ 11s] [41/104] installing build-compare-2015.04.28-3.13 [ 11s] [42/104] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 13s] [43/104] installing terminfo-base-full-6.1-3.43 [ 13s] [44/104] installing coreutils-6.9-3.1 [ 13s] [45/104] installing cpp-6.2.1-3.2 [ 14s] [46/104] installing flex-2.6.4-3.6 [ 14s] [47/104] installing gawk-3.1.5-3.1 [ 14s] [48/104] installing gcc-c++-6.2.1-3.2 [ 14s] [49/104] installing grep-2.5.2-3.1 [ 14s] [50/104] installing libacl-2.2.52-3.72 [ 14s] [51/104] installing libasm-0.153-3.8 [ 14s] [52/104] installing libblkid-2.30-3.1 [ 14s] [53/104] installing libgcrypt-1.8.3-3.1 [ 15s] [54/104] installing libstdc++-6.2.1-3.2 [ 15s] [55/104] installing make-4.0-3.6 [ 15s] [56/104] installing nss-certs-3.34.1-3.39 [ 15s] [57/104] installing smack-1.3.1-3.68 [ 15s] [58/104] installing bzip2-1.0.6-3.68 [ 15s] [59/104] installing libgfortran-6.2.1-3.2 [ 15s] [60/104] installing libmagic-5.32-3.43 [ 15s] [61/104] installing libxml2-2.9.7-3.23 [ 15s] [62/104] installing xz-5.2.3-3.49 [ 15s] [63/104] installing libdw-0.153-3.8 [ 15s] [64/104] installing libstdc++-devel-6.2.1-3.2 [ 15s] [65/104] installing file-5.32-3.43 [ 15s] [66/104] installing libmount-2.30-3.1 [ 15s] [67/104] installing linux-glibc-devel-3.10-3.75 [ 16s] [68/104] installing tar-1.17-3.1 [ 16s] [69/104] installing db4-4.8.30.NC-3.65 [ 16s] [70/104] installing glibc-locale-2.24-3.18 [ 16s] [71/104] installing gzip-1.3.12-3.76 [ 16s] [72/104] installing libcc1-6.2.1-3.2 [ 16s] [73/104] installing libfdisk-2.30-3.1 [ 16s] [74/104] installing libubsan-6.2.1-3.2 [ 16s] [75/104] installing libxslt-1.1.31-3.1 [ 16s] [76/104] installing pam-1.1.6-3.1 [ 17s] [77/104] installing libncurses6-6.1-3.43 [ 17s] [78/104] installing tzdata-2018c-2.1 [ 17s] [79/104] installing elfutils-0.153-3.8 [ 17s] [80/104] installing libncurses-6.1-3.43 [ 17s] [81/104] installing glibc-devel-2.24-3.18 [ 17s] [82/104] installing less-466-3.1 [ 17s] [83/104] installing libreadline-5.2-3.27 [ 17s] [84/104] installing procps-ng-3.3.15-3.1 [ 17s] [85/104] installing perl-5.20.0-3.9 [ 18s] [86/104] installing gcc-6.2.1-3.2 [ 20s] [87/104] installing build-mkbaselibs-20120927-3.1 [ 20s] [88/104] installing qemu-accel-x86_64-aarch64-0.4-4.1 [ 26s] [89/104] installing autoconf-2.69-3.23 [ 26s] [90/104] installing libxml2-tools-2.9.7-3.23 [ 26s] [91/104] installing util-linux-2.30-3.1 [ 26s] [92/104] installing automake-1.15.1-3.39 [ 26s] [93/104] installing util-linux-su-2.30-3.1 [ 26s] [94/104] installing sgml-skel-0.6-3.1 [ 26s] [95/104] installing build-20120927-3.1 [ 27s] [96/104] installing iso_ent-2000.11.03-3.1 [ 27s] [97/104] installing libtool-2.4.2-3.55 [ 27s] [98/104] installing xmlcharent-0.3-3.1 [ 27s] [99/104] installing docbook_4-4.5-3.1 [ 27s] [100/104] installing docbook-xsl-stylesheets-1.78.1-3.1 [ 28s] [101/104] installing nss-3.34.1-3.39 [ 28s] [102/104] installing libsoftokn3-3.34.1-3.39 [ 28s] [103/104] installing rpm-4.11.0.1-3.35 [ 28s] [104/104] installing rpm-build-4.11.0.1-3.35 [ 28s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 28s] now finalizing build dir... [ 29s] build target is aarch64-tizen-linux [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for xmlto.spec: [ 29s] 4c4 [ 29s] < Release: 0 [ 29s] --- [ 29s] > Release: 3.1 [ 29s] ----------------------------------------------------------------- [ 29s] ----- building xmlto.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.0:Unified/standard/6e3846116d69e377c7be1ed1eaa8c2d6-xmlto' -ba /home/abuild/rpmbuild/SOURCES/xmlto.spec [ 29s] Building target platforms: aarch64-tizen-linux [ 29s] Building for target aarch64-tizen-linux [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OPo5rO [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf xmlto-0.0.25 [ 29s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/xmlto-0.0.25.tar.bz2 [ 29s] + /bin/tar -xf - [ 29s] + STATUS=0 [ 29s] + '[' 0 -ne 0 ']' [ 29s] + cd xmlto-0.0.25 [ 29s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 29s] + echo 'Patch #0 (0001-xmlto-nonvoid.patch):' [ 29s] Patch #0 (0001-xmlto-nonvoid.patch): [ 29s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-xmlto-nonvoid.patch [ 29s] + /bin/patch -p1 --fuzz=2 [ 29s] patching file xmlif/xmlif.c [ 29s] patching file xmlif/xmlif.l [ 29s] + echo 'Patch #1 (0002-xmlto-overflow.patch):' [ 29s] Patch #1 (0002-xmlto-overflow.patch): [ 29s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-xmlto-overflow.patch [ 29s] + /bin/patch -p1 --fuzz=2 [ 29s] patching file xmlif/xmlif.c [ 29s] + echo 'Patch #2 (0003-xmlto-xsltopts.patch):' [ 29s] Patch #2 (0003-xmlto-xsltopts.patch): [ 29s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-xmlto-xsltopts.patch [ 29s] + /bin/patch -p1 --fuzz=2 [ 29s] patching file xmlto.in [ 29s] + echo 'Patch #3 (0004-xmlto-codecleanup.patch):' [ 29s] Patch #3 (0004-xmlto-codecleanup.patch): [ 29s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-xmlto-codecleanup.patch [ 29s] + /bin/patch -p1 --fuzz=2 [ 29s] patching file xmlif/xmlif.l [ 29s] + echo 'Patch #4 (0005-xmlto-lynx-empty-file.patch):' [ 29s] Patch #4 (0005-xmlto-lynx-empty-file.patch): [ 29s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-xmlto-lynx-empty-file.patch [ 29s] + /bin/patch -p1 --fuzz=2 [ 29s] patching file xmlto.in [ 29s] + cp /home/abuild/rpmbuild/SOURCES/xmlto.manifest . [ 29s] + rm -f xmlif/xmlif.c [ 29s] + exit 0 [ 29s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.v3DEFD [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd xmlto-0.0.25 [ 29s] ++ uname -m [ 29s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 29s] + ref=/usr/lib/rpm [ 29s] + for s in guess sub [ 29s] ++ find -maxdepth 8 -name config.guess [ 29s] + for s in guess sub [ 29s] ++ find -maxdepth 8 -name config.sub [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 29s] + export CFLAGS [ 29s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 29s] + export CXXFLAGS [ 29s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 29s] + export FFLAGS [ 29s] + LDFLAGS= [ 29s] + export LDFLAGS [ 29s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 29s] + export CFLAGS [ 29s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 29s] + export CXXFLAGS [ 29s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 29s] + export FFLAGS [ 29s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 30s] checking for a BSD-compatible install... /bin/install -c [ 31s] checking whether build environment is sane... yes [ 31s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 31s] checking for gawk... gawk [ 31s] checking whether make sets $(MAKE)... yes [ 31s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 31s] checking whether the C compiler works... yes [ 31s] checking for C compiler default output file name... a.out [ 31s] checking for suffix of executables... [ 31s] checking whether we are cross compiling... no [ 31s] checking for suffix of object files... o [ 31s] checking whether we are using the GNU C compiler... yes [ 31s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 31s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 31s] checking for style of include used by make... GNU [ 31s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 31s] checking whether aarch64-tizen-linux-gnu-gcc and cc understand -c and -o together... yes [ 31s] checking for flex... flex [ 31s] checking lex output file root... lex.yy [ 32s] checking lex library... -lfl [ 32s] checking whether yytext is a pointer... yes [ 32s] checking for mktemp... mktemp [ 32s] checking for find... find [ 32s] checking for bash... /bin/sh [ 32s] checking for getopt... getopt [ 32s] checking for long options support in getopt... yes [ 32s] checking for paperconf... paperconf [ 32s] checking for locale... /bin/locale [ 32s] checking for xmllint... /bin/xmllint [ 32s] checking for xsltproc... xsltproc [ 32s] checking for dblatex... dblatex [ 32s] checking for fop... fop [ 32s] checking for xmltex... xmltex [ 32s] checking for pdfxmltex... pdfxmltex [ 32s] checking for default backend... DEFAULT [ 32s] checking for lynx... lynx [ 32s] checking for links... links [ 32s] checking for w3m... w3m [ 32s] checking for tail... /bin/tail [ 32s] checking for grep... /bin/grep [ 32s] checking for cp... /bin/cp [ 32s] checking for zip... zip [ 32s] checking for default web browser... w3m [ 32s] configure: creating ./config.status [ 32s] config.status: creating Makefile [ 32s] config.status: creating xmlto [ 32s] config.status: creating xmlto.spec [ 32s] config.status: creating config.h [ 33s] config.status: executing depfiles commands [ 33s] + make -j8 [ 33s] make all-am [ 33s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 33s] /bin/sh ./ylwrap xmlif/xmlif.l lex.yy.c xmlif/xmlif.c -- flex [ 33s] depbase=`echo xmlif/xmlif.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ [ 33s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -MT xmlif/xmlif.o -MD -MP -MF $depbase.Tpo -c -o xmlif/xmlif.o xmlif/xmlif.c &&\ [ 33s] mv -f $depbase.Tpo $depbase.Po [ 33s] xmlif/xmlif.c:2004:16: warning: 'input' defined but not used [-Wunused-function] [ 33s] #else [ 33s] ^ [ 33s] xmlif/xmlif.c:1961:17: warning: 'yyunput' defined but not used [-Wunused-function] [ 33s] [ 33s] ^ [ 33s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o xmlif/xmlif xmlif/xmlif.o [ 33s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 33s] + exit 0 [ 33s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.KffR2B [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd xmlto-0.0.25 [ 33s] + LANG=C [ 33s] + export LANG [ 33s] + unset DISPLAY [ 33s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 [ 33s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 [ 33s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 install [ 33s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 33s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/bin" [ 33s] /bin/install -c xmlif/xmlif '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/bin' [ 33s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/bin" [ 33s] /bin/install -c xmlto '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/bin' [ 33s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/man/man1" [ 33s] /bin/install -c -m 644 man/man1/xmlto.1 man/man1/xmlif.1 '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/man/man1' [ 33s] test -z "/usr/share/xmlto" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto" [ 33s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook' [ 33s] /bin/install -c -m 644 format/docbook/dvi format/docbook/epub format/docbook/fo format/docbook/html format/docbook/html-nochunks format/docbook/xhtml format/docbook/xhtml-nochunks format/docbook/man format/docbook/pdf format/docbook/ps format/docbook/txt format/docbook/htmlhelp format/docbook/javahelp format/docbook/mif format/docbook/pcl format/docbook/svg format/docbook/awt '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook' [ 33s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1' [ 33s] /bin/install -c -m 644 format/xhtml1/dvi format/xhtml1/fo format/xhtml1/pdf format/xhtml1/ps format/xhtml1/txt format/xhtml1/awt format/xhtml1/mif format/xhtml1/pcl format/xhtml1/svg '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1' [ 33s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/fo' [ 33s] /bin/install -c -m 644 format/fo/ps format/fo/awt format/fo/mif format/fo/pcl format/fo/svg format/fo/txt format/fo/dvi format/fo/pdf '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/fo' [ 33s] /bin/install -c -m 644 xmlto.mak '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/.' [ 33s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 33s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/info/dir [ 33s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 -regex '.*\.la$' [ 33s] + xargs rm -f -- [ 33s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 -regex '.*\.a$' [ 33s] + xargs rm -f -- [ 33s] + mkdir /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/xsl [ 33s] + _target= [ 33s] + _symlinks=0 [ 33s] + _files=() [ 33s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/awt [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/mif [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z [ 33s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/awt [ 33s] ++ sort [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/mif [ 33s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/awt [ 33s] ++ seq 1 1 [ 33s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 33s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/mif [ 33s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/mif [ 33s] + test 0 = 1 [ 33s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/mif [ 33s] + _files=() [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/ps [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z [ 33s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/ps [ 33s] ++ sort [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 33s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 33s] ++ seq 1 2 [ 33s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 33s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 33s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 33s] + test 0 = 1 [ 33s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 33s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 33s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/ps [ 33s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/ps [ 33s] + test 0 = 1 [ 33s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/ps [ 33s] + _files=() [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/svg [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z [ 33s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/svg [ 33s] ++ sort [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 33s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 33s] ++ seq 1 1 [ 33s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 33s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/svg [ 33s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/svg [ 33s] + test 0 = 1 [ 33s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/xhtml1/svg [ 33s] + _files=() [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/awt [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/mif [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z [ 33s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/awt [ 33s] ++ sort [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/mif [ 33s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/awt [ 33s] ++ seq 1 1 [ 33s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 33s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/mif [ 33s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/mif [ 33s] + test 0 = 1 [ 33s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/mif [ 33s] + _files=() [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/ps [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pdf [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z [ 33s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/ps [ 33s] ++ sort [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pdf [ 33s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pdf [ 33s] ++ seq 1 1 [ 33s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 33s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/ps [ 33s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/ps [ 33s] + test 0 = 1 [ 33s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pdf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/ps [ 33s] + _files=() [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/svg [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pcl [ 33s] + _files+=($_file) [ 33s] + read _file [ 33s] + test -z [ 33s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/svg [ 33s] ++ sort [ 33s] ++ for i in '${_files[*]}' [ 33s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pcl [ 34s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pcl [ 34s] ++ seq 1 1 [ 34s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 34s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/svg [ 34s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/svg [ 34s] + test 0 = 1 [ 34s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/xmlto/format/docbook/svg [ 34s] + _files=() [ 34s] + read _file [ 34s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlto-0.0.25 [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/bin/xmlif [ 34s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 34s] cpio: xmlto-0.0.25/xmlif.l: Cannot stat: No such file or directory [ 34s] 184 blocks [ 34s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlto-0.0.25/xmlto-debuginfo.manifest [ 34s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlto-0.0.25/xmlto-debugsource.manifest [ 34s] + /usr/lib/rpm/check-buildroot [ 34s] + /usr/lib/rpm//brp-compress [ 34s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 34s] + /usr/lib/rpm/brp-python-hardlink [ 34s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 [ 34s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.6ZVupD [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd xmlto-0.0.25 [ 34s] + make check [ 34s] make check-TESTS [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 34s] PASS: xmlif/test/run-test [ 34s] ============= [ 34s] 1 test passed [ 34s] ============= [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 34s] + exit 0 [ 34s] Processing files: xmlto-0.0.25-3.1.aarch64 [ 34s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 34s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 34s] [ 34s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Edn8oF [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd xmlto-0.0.25 [ 34s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/doc/packages/xmlto [ 34s] + export DOCDIR [ 34s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/doc/packages/xmlto [ 34s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64/usr/share/doc/packages/xmlto [ 34s] + exit 0 [ 35s] Provides: xmlto = 0.0.25-3.1 xmlto(aarch-64) = 0.0.25-3.1 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Requires: /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 35s] Processing files: xmlto-debugsource-0.0.25-3.1.aarch64 [ 35s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 35s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 35s] [ 35s] Provides: xmlto-debugsource = 0.0.25-3.1 xmlto-debugsource(aarch-64) = 0.0.25-3.1 [ 35s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 35s] Processing files: xmlto-debuginfo-0.0.25-3.1.aarch64 [ 35s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 35s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 35s] [ 35s] Provides: xmlto-debuginfo = 0.0.25-3.1 xmlto-debuginfo(aarch-64) = 0.0.25-3.1 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 [ 35s] warning: Could not canonicalize hostname: obspw13 [ 35s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlto-0.0.25-3.1.src.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-0.0.25-3.1.aarch64.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debugsource-0.0.25-3.1.aarch64.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debuginfo-0.0.25-3.1.aarch64.rpm [ 35s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.WYmmxT [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd xmlto-0.0.25 [ 35s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-3.1.aarch64 [ 35s] + exit 0 [ 35s] ... checking for files with abuild user/group [ 35s] ... creating baselibs [ 36s] [ 36s] obspw13 finished "build xmlto.spec" at Sat Nov 3 01:08:57 UTC 2018. [ 36s] Retried build at Fri Nov 9 13:58:21 2018 returned same result, skipped Retried build at Fri Nov 16 15:52:06 2018 returned same result, skipped Retried build at Fri Nov 30 20:12:31 2018 returned same result, skipped Retried build at Fri Jan 11 10:44:24 2019 returned same result, skipped Retried build at Fri Jan 11 10:59:36 2019 returned same result, skipped Retried build at Sat Mar 16 03:04:46 2019 returned same result, skipped