[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw10 started "build _service:gbs:python-pycurl.spec" at Fri Nov 2 07:22:59 UTC 2018. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:5.0:Unified' repository 'standard' arch 'armv7l' srcmd5 'd919cb611ace577d376bb585b81785ce' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libelf... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [27/40] preinstalling coreutils... [ 6s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] [1/107] installing libmagic-data-5.32-3.43 [ 8s] [2/107] installing setup-0.9-3.1 [ 8s] warning: /etc/profile created as /etc/profile.rpmnew [ 8s] [3/107] installing filesystem-3.1-3.1 [ 8s] [4/107] installing glibc-2.24-3.18 [ 8s] [5/107] installing libatomic-6.2.1-3.2 [ 8s] [6/107] installing libcurl-extension-dlp-7.59.0-3.1 [ 8s] [7/107] installing libgcc-6.2.1-3.2 [ 9s] [8/107] installing bash-3.2.57-3.1 [ 9s] [9/107] installing binutils-2.27-3.21 [ 9s] [10/107] installing cpio-2.11-3.1 [ 9s] [11/107] installing diffutils-3.3-3.1 [ 9s] [12/107] installing findutils-4.3.8-3.68 [ 9s] [13/107] installing hostname-3.20-3.1 [ 9s] [14/107] installing libattr-2.4.47-3.75 [ 9s] [15/107] installing libbz2-1.0.6-3.68 [ 9s] [16/107] installing libcap-2.24-3.76 [ 9s] [17/107] installing libcares-1.12.0-3.1 [ 10s] [18/107] installing libelf-0.153-3.8 [ 10s] [19/107] installing libext2fs-1.43.4-3.1 [ 10s] [20/107] installing libfreebl3-3.34.1-3.39 [ 10s] [21/107] installing libgomp-6.2.1-3.2 [ 10s] [22/107] installing libitm-6.2.1-3.2 [ 10s] [23/107] installing libltdl-2.4.2-3.55 [ 10s] [24/107] installing liblua-5.1.5-3.3 [ 10s] [25/107] installing liblzma-5.2.3-3.49 [ 10s] [26/107] installing libpcre-8.41-3.1 [ 11s] [27/107] installing libpopt-1.16-3.3 [ 11s] [28/107] installing libpython-2.7.8-3.12 [ 11s] [29/107] installing libsmack-1.3.1-3.68 [ 11s] [30/107] installing libsmartcols-2.30-3.1 [ 11s] [31/107] installing libsqlite-3.24.0-3.19 [ 11s] [32/107] installing libstdc++-6.2.1-3.2 [ 11s] [33/107] installing libuuid-2.30-3.1 [ 11s] [34/107] installing m4-1.4.17-3.1 [ 11s] [35/107] installing net-tools-2.0_20121208git-3.1 [ 11s] [36/107] installing nghttp2-1.31.1-3.1 [ 12s] [37/107] installing nspr-4.12-3.3 [ 12s] [38/107] installing patch-2.7-3.3 [ 12s] [39/107] installing pkg-config-0.28-3.69 [ 12s] [40/107] installing sed-4.1c-3.1 [ 12s] [41/107] installing update-alternatives-1.18.15-3.1 [ 12s] [42/107] installing which-2.20-3.1 [ 12s] [43/107] installing zlib-1.2.11-3.73 [ 12s] [44/107] installing build-compare-2015.04.28-3.13 [ 12s] [45/107] installing libstdc++-devel-6.2.1-3.2 [ 12s] [46/107] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 14s] [47/107] installing terminfo-base-full-6.1-3.43 [ 14s] [48/107] installing cpp-6.2.1-3.2 [ 14s] [49/107] installing gcc-c++-6.2.1-3.2 [ 15s] [50/107] installing coreutils-6.9-3.1 [ 15s] [51/107] installing db4-4.8.30.NC-3.65 [ 15s] [52/107] installing gawk-3.1.5-3.1 [ 15s] [53/107] installing grep-2.5.2-3.1 [ 15s] [54/107] installing libacl-2.2.52-3.72 [ 15s] [55/107] installing libasm-0.153-3.8 [ 15s] [56/107] installing libblkid-2.30-3.1 [ 15s] [57/107] installing libcc1-6.2.1-3.2 [ 16s] [58/107] installing libgfortran-6.2.1-3.2 [ 16s] [59/107] installing libopenssl-1.0.2o-3.33 [ 16s] [60/107] installing libubsan-6.2.1-3.2 [ 16s] [61/107] installing make-4.0-3.6 [ 16s] [62/107] installing nss-certs-3.34.1-3.39 [ 16s] [63/107] installing smack-1.3.1-3.68 [ 16s] [64/107] installing bzip2-1.0.6-3.68 [ 16s] [65/107] installing libicu-63.1-3.1 [ 17s] [66/107] installing libmagic-5.32-3.43 [ 17s] [67/107] installing libxml2-2.9.7-3.23 [ 17s] [68/107] installing xz-5.2.3-3.49 [ 17s] [69/107] installing libdw-0.153-3.8 [ 17s] [70/107] installing linux-glibc-devel-3.10-3.75 [ 18s] [71/107] installing file-5.32-3.43 [ 18s] [72/107] installing glibc-locale-2.24-3.18 [ 18s] [73/107] installing libmount-2.30-3.1 [ 18s] [74/107] installing openssl-1.0.2o-3.33 [ 18s] [75/107] installing tar-1.17-3.1 [ 18s] [76/107] installing gzip-1.3.12-3.76 [ 18s] [77/107] installing libfdisk-2.30-3.1 [ 19s] [78/107] installing libncurses6-6.1-3.43 [ 19s] [79/107] installing pam-1.1.6-3.1 [ 19s] [80/107] installing perl-5.20.0-3.9 [ 20s] [81/107] installing tzdata-2018c-2.1 [ 20s] [82/107] installing elfutils-0.153-3.8 [ 20s] [83/107] installing libcurl-7.59.0-3.1 [ 20s] [84/107] installing gcc-6.2.1-3.2 [ 21s] [85/107] installing build-mkbaselibs-20120927-3.1 [ 21s] [86/107] installing libncurses-6.1-3.43 [ 21s] [87/107] installing glibc-devel-2.24-3.18 [ 21s] [88/107] installing qemu-accel-x86_64-armv7l-0.4-4.1 [ 26s] [89/107] installing autoconf-2.69-3.23 [ 26s] [90/107] installing less-466-3.1 [ 27s] [91/107] installing libreadline-5.2-3.27 [ 27s] [92/107] installing procps-ng-3.3.15-3.1 [ 27s] [93/107] installing libcurl-devel-7.59.0-3.1 [ 27s] [94/107] installing automake-1.15.1-3.39 [ 27s] [95/107] installing libcares-devel-1.12.0-3.1 [ 27s] [96/107] installing zlib-devel-1.2.11-3.73 [ 27s] [97/107] installing build-20120927-3.1 [ 27s] [98/107] installing python-2.7.8-3.12 [ 28s] [99/107] installing util-linux-2.30-3.1 [ 28s] [100/107] installing libopenssl-devel-1.0.2o-3.33 [ 28s] [101/107] installing libtool-2.4.2-3.55 [ 28s] [102/107] installing util-linux-su-2.30-3.1 [ 28s] [103/107] installing python-devel-2.7.8-3.12 [ 29s] [104/107] installing nss-3.34.1-3.39 [ 29s] [105/107] installing libsoftokn3-3.34.1-3.39 [ 29s] [106/107] installing rpm-4.11.0.1-3.35 [ 29s] [107/107] installing rpm-build-4.11.0.1-3.35 [ 29s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 29s] now finalizing build dir... [ 30s] Warning: spec file parser line 59: can't expand %(...) [ 30s] Warning: spec file parser line 60: can't expand %(...) [ 30s] build target is armv7l-tizen-linux [ 30s] ----------------------------------------------------------------- [ 30s] I have the following modifications for python-pycurl.spec: [ 30s] 6c6 [ 30s] < Release: 0 [ 30s] --- [ 30s] > Release: 3.1 [ 30s] 60a61 [ 30s] > %changelog [ 30s] ----------------------------------------------------------------- [ 30s] ----- building python-pycurl.spec (user abuild) [ 30s] ----------------------------------------------------------------- [ 30s] ----------------------------------------------------------------- [ 31s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.0:Unified/standard/d919cb611ace577d376bb585b81785ce-python-pycurl' -ba /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 31s] Building target platforms: armv7l-tizen-linux [ 31s] Building for target armv7l-tizen-linux [ 31s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6kpuRV [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + rm -rf pycurl-7.19.0 [ 31s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pycurl-7.19.0.tar.gz [ 31s] + /bin/tar -xf - [ 31s] + STATUS=0 [ 31s] + '[' 0 -ne 0 ']' [ 31s] + cd pycurl-7.19.0 [ 31s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 31s] + echo 'Patch #0 (0001-Don-t-build-static-libs.patch):' [ 31s] Patch #0 (0001-Don-t-build-static-libs.patch): [ 31s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Don-t-build-static-libs.patch [ 31s] + /bin/patch -p1 --fuzz=2 [ 31s] patching file setup.py [ 31s] + echo 'Patch #1 (0002-Link-with-libcrypto.patch):' [ 31s] Patch #1 (0002-Link-with-libcrypto.patch): [ 31s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Link-with-libcrypto.patch [ 31s] + /bin/patch -p1 --fuzz=2 [ 31s] patching file setup.py [ 31s] + echo 'Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch):' [ 31s] Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch): [ 31s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch [ 31s] + /bin/patch -p1 --fuzz=2 [ 31s] patching file src/pycurl.c [ 31s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 31s] + exit 0 [ 31s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.aOrUtR [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd pycurl-7.19.0 [ 31s] ++ uname -m [ 31s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 31s] + LANG=C [ 31s] + export LANG [ 31s] + unset DISPLAY [ 31s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 31s] + export CFLAGS [ 31s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 31s] + export CXXFLAGS [ 31s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 31s] + export FFLAGS [ 31s] + LDFLAGS= [ 31s] + export LDFLAGS [ 31s] + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . [ 31s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL' [ 31s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL' [ 31s] + python setup.py build [ 32s] Using curl-config (libcurl 7.59.0) [ 32s] running build [ 32s] running build_py [ 32s] creating build [ 32s] creating build/lib.linux-armv7l-2.7 [ 32s] creating build/lib.linux-armv7l-2.7/curl [ 32s] copying python/curl/__init__.py -> build/lib.linux-armv7l-2.7/curl [ 32s] running build_ext [ 32s] building 'pycurl' extension [ 32s] creating build/temp.linux-armv7l-2.7 [ 32s] creating build/temp.linux-armv7l-2.7/src [ 32s] armv7l-tizen-linux-gnueabi-gcc -pthread -DNDEBUG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-armv7l-2.7/src/pycurl.o [ 32s] src/pycurl.c: In function 'multi_socket_callback': [ 32s] src/pycurl.c:2351:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 32s] int ret; [ 32s] ^~~ [ 32s] src/pycurl.c: In function 'initpycurl': [ 32s] src/pycurl.c:3455:31: warning: passing argument 3 of 'insstr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 32s] insstr(d, "COMPILE_DATE", COMPILE_DATE); [ 32s] ^~~~~~~~~~~~ [ 32s] src/pycurl.c:3379:1: note: expected 'char *' but argument is of type 'const char *' [ 32s] insstr(PyObject *d, char *name, char *value) [ 32s] ^~~~~~ [ 33s] armv7l-tizen-linux-gnueabi-gcc -pthread -shared -Wl,-z,relro -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL build/temp.linux-armv7l-2.7/src/pycurl.o -L. -lcurl -lcares -lnghttp2 -licuuc -licudata -lssl -lcrypto -lssl -lcrypto -lz -lcrypto -lpython2.7 -o build/lib.linux-armv7l-2.7/pycurl.so [ 33s] + exit 0 [ 33s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.KreW1S [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd pycurl-7.19.0 [ 33s] + LANG=C [ 33s] + export LANG [ 33s] + unset DISPLAY [ 33s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm [ 33s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm [ 33s] + python setup.py install -O1 --skip-build --root=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm --prefix=/usr [ 34s] Using curl-config (libcurl 7.59.0) [ 34s] running install [ 34s] running install_lib [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7 [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages/curl [ 34s] copying build/lib.linux-armv7l-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages/curl [ 34s] copying build/lib.linux-armv7l-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages [ 34s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 34s] writing byte-compilation script '/tmp/tmpTUnH93.py' [ 34s] /bin/python -O /tmp/tmpTUnH93.py [ 34s] removing /tmp/tmpTUnH93.py [ 34s] running install_data [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/html [ 34s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/html [ 34s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/html [ 34s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/html [ 34s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/html [ 34s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/html [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/examples [ 34s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/pycurl/tests [ 34s] running install_egg_info [ 34s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/info [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/packages [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/python-pycurl [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc/python-pycurl-7.19.0 [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/gtk-doc [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/doc [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/man [ 34s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 34s] + xargs rm -f -- [ 34s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 34s] + xargs rm -f -- [ 34s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 34s] + xargs rm -f -- [ 34s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pycurl-7.19.0 [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/lib/python2.7/site-packages/pycurl.so [ 35s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 35s] 246 blocks [ 35s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debuginfo.manifest [ 35s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debugsource.manifest [ 35s] + /usr/lib/rpm/check-buildroot [ 35s] + /usr/lib/rpm//brp-compress [ 35s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 35s] + /usr/lib/rpm/brp-python-hardlink [ 35s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm [ 35s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.eLvMl0 [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd pycurl-7.19.0 [ 35s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 35s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 35s] + python tests/test_internals.py -q [ 35s] gc: collectable [ 35s] gc: collectable [ 35s] gc: collectable [ 35s] gc: collectable [ 35s] Python 2.7.8 (default, Nov 02 2018, 06:34:04) [GCC] [ 35s] PycURL libcurl/7.59.0 OpenSSL/1.0.2o zlib/1.2.11 c-ares/1.12.0 nghttp2/1.31.1 (compiled against 0x73b00) [ 35s] PycURL version info (4, '7.59.0', 473856, 'armv7l-tizen-linux-gnueabi', 2745053, 'OpenSSL/1.0.2o', 0, '1.2.11', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'pop3', 'pop3s', 'rtsp', 'smb', 'smbs', 'smtp', 'smtps', 'telnet', 'tftp'), '1.12.0', 68608, None) [ 35s] build/lib.linux-armv7l-2.7/pycurl.so, compiled Nov 2 2018 07:23:31 [ 35s] All tests passed. [ 36s] + exit 0 [ 36s] Processing files: python-pycurl-7.19.0-3.1.armv7l [ 36s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 36s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 36s] [ 36s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 36s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 36s] [ 36s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.7CJ4a9 [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd pycurl-7.19.0 [ 36s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/licenses/python-pycurl [ 36s] + export LICENSEDIR [ 36s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/licenses/python-pycurl [ 36s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm/usr/share/licenses/python-pycurl [ 36s] + exit 0 [ 36s] Provides: pycurl = 7.19.0-3.1 pycurl.so python-pycurl = 7.19.0-3.1 python-pycurl(armv7l-32) = 7.19.0-3.1 [ 36s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 36s] Requires: libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpython2.7.so.1.0 python(abi) = 2.7 rtld(GNU_HASH) [ 36s] Processing files: python-pycurl-debugsource-7.19.0-3.1.armv7l [ 36s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 36s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 36s] [ 36s] Provides: python-pycurl-debugsource = 7.19.0-3.1 python-pycurl-debugsource(armv7l-32) = 7.19.0-3.1 [ 36s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 36s] Processing files: python-pycurl-debuginfo-7.19.0-3.1.armv7l [ 36s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 36s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 36s] [ 36s] Provides: python-pycurl-debuginfo = 7.19.0-3.1 python-pycurl-debuginfo(armv7l-32) = 7.19.0-3.1 [ 36s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 36s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm [ 36s] warning: Could not canonicalize hostname: obsnw10 [ 36s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-3.1.src.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-3.1.armv7l.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-3.1.armv7l.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-3.1.armv7l.rpm [ 36s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.COjegZ [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd pycurl-7.19.0 [ 36s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.1.arm [ 36s] + exit 0 [ 36s] ... checking for files with abuild user/group [ 36s] ... creating baselibs [ 37s] [ 37s] obsnw10 finished "build python-pycurl.spec" at Fri Nov 2 07:23:36 UTC 2018. [ 37s] Retried build at Fri Nov 2 08:41:16 2018 returned same result, skipped Retried build at Fri Nov 9 13:45:23 2018 returned same result, skipped Retried build at Fri Nov 16 15:35:24 2018 returned same result, skipped Retried build at Fri Nov 23 13:17:13 2018 returned same result, skipped Retried build at Fri Nov 30 20:51:02 2018 returned same result, skipped Retried build at Fri Dec 7 12:08:01 2018 returned same result, skipped Retried build at Fri Jan 11 11:11:43 2019 returned same result, skipped Retried build at Fri Feb 8 06:20:24 2019 returned same result, skipped Retried build at Mon Mar 4 23:40:24 2019 returned same result, skipped Retried build at Thu Mar 14 22:14:19 2019 returned same result, skipped Retried build at Sat Mar 16 02:53:42 2019 returned same result, skipped