[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw02 started "build _service:gbs:xmlsec1.spec" at Tue Oct 27 08:23:15 UTC 2020. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen:5.5:Unified:Mobile:Hotfix' repository 'standard' arch 'armv7l' srcmd5 '21255eba9506203453817c46b0973108' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:xmlsec1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling libncurses... [ 2s] [3/40] preinstalling setup... [ 2s] [4/40] preinstalling filesystem... [ 2s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libelf... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [27/40] preinstalling coreutils... [ 9s] [28/40] preinstalling libacl... [ 9s] [29/40] preinstalling libblkid... [ 9s] [30/40] preinstalling smack... [ 9s] [31/40] preinstalling bzip2... [ 9s] [32/40] preinstalling libmagic... [ 9s] [33/40] preinstalling libxml2... [ 9s] [34/40] preinstalling libmount... [ 9s] [35/40] preinstalling tar... [ 9s] [36/40] preinstalling util-linux... [ 9s] [37/40] preinstalling util-linux-su... [ 9s] [38/40] preinstalling nss... [ 10s] [39/40] preinstalling libsoftokn3... [ 10s] [40/40] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-armv7l postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/110] installing libmagic-data-5.37-1.43 [ 11s] [2/110] installing setup-0.9-1.2 [ 11s] warning: /etc/profile created as /etc/profile.rpmnew [ 11s] [3/110] installing filesystem-3.1-1.1 [ 12s] [4/110] installing glibc-2.24-1.19 [ 12s] [5/110] installing libatomic-6.2.1-1.3 [ 13s] [6/110] installing libgcc-6.2.1-1.3 [ 13s] [7/110] installing bash-3.2.57-1.1 [ 14s] [8/110] installing binutils-2.27-1.23 [ 14s] [9/110] installing cpio-2.11-1.1 [ 14s] [10/110] installing diffutils-3.3-1.1 [ 14s] [11/110] installing fdupes-1.40-1.66 [ 14s] [12/110] installing findutils-4.3.8-1.63 [ 14s] [13/110] installing gdbm-1.8.3-1.69 [ 15s] [14/110] installing hostname-3.20-1.1 [ 15s] [15/110] installing libattr-2.4.47-1.70 [ 15s] [16/110] installing libbz2-1.0.6-1.60 [ 16s] [17/110] installing libcap-2.24-1.64 [ 16s] [18/110] installing libelf-0.153-1.9 [ 16s] [19/110] installing libext2fs-1.43.4-1.1 [ 17s] [20/110] installing libfreebl3-3.34.1-1.44 [ 18s] [21/110] installing libgomp-6.2.1-1.3 [ 18s] [22/110] installing libgpg-error-1.27-1.1 [ 19s] [23/110] installing libitm-6.2.1-1.3 [ 19s] [24/110] installing libltdl-2.4.2-1.52 [ 19s] [25/110] installing liblua-5.1.5-1.2 [ 19s] [26/110] installing liblzma-5.2.4-1.50 [ 20s] [27/110] installing libopenssl11-1.1.1d-1.27 [ 20s] [28/110] installing libpcre-8.43-1.2 [ 21s] [29/110] installing libpopt-1.16-1.4 [ 21s] [30/110] installing libsmack-1.3.1-1.2 [ 22s] [31/110] installing libsmartcols-2.30-1.1 [ 22s] [32/110] installing libsqlite-3.29.0-1.27 [ 22s] [33/110] installing libstdc++-6.2.1-1.3 [ 23s] [34/110] installing libuuid-2.30-1.1 [ 24s] [35/110] installing m4-1.4.17-1.1 [ 24s] [36/110] installing net-tools-2.0_20121208git-1.1 [ 24s] [37/110] installing nspr-4.12-1.2 [ 24s] [38/110] installing patch-2.7-1.4 [ 25s] [39/110] installing pkg-config-0.28-1.63 [ 25s] [40/110] installing sed-4.1c-1.1 [ 25s] [41/110] installing update-alternatives-1.18.15-1.1 [ 25s] [42/110] installing which-2.20-1.1 [ 25s] [43/110] installing zlib-1.2.11-1.67 [ 25s] [44/110] installing build-compare-2015.04.28-1.16 [ 26s] [45/110] installing libstdc++-devel-6.2.1-1.3 [ 26s] [46/110] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 29s] [47/110] installing terminfo-base-full-6.1-1.41 [ 30s] [48/110] installing cpp-6.2.1-1.3 [ 31s] [49/110] installing gcc-c++-6.2.1-1.3 [ 33s] [50/110] installing xz-devel-5.2.4-1.50 [ 33s] [51/110] installing coreutils-6.9-1.4 [ 33s] [52/110] installing db4-4.8.30.NC-1.61 [ 34s] [53/110] installing gawk-3.1.5-1.1 [ 34s] [54/110] installing grep-2.5.2-1.1 [ 34s] [55/110] installing libacl-2.2.52-1.69 [ 34s] [56/110] installing libasm-0.153-1.9 [ 35s] [57/110] installing libblkid-2.30-1.1 [ 35s] [58/110] installing libcc1-6.2.1-1.3 [ 35s] [59/110] installing libgcrypt-1.8.3-1.1 [ 36s] [60/110] installing libgfortran-6.2.1-1.3 [ 36s] [61/110] installing libubsan-6.2.1-1.3 [ 38s] [62/110] installing make-4.0-1.7 [ 38s] [63/110] installing nss-certs-3.34.1-1.44 [ 38s] [64/110] installing smack-1.3.1-1.2 [ 38s] [65/110] installing bzip2-1.0.6-1.60 [ 39s] [66/110] installing libmagic-5.37-1.43 [ 39s] [67/110] installing libxml2-2.9.7-1.21 [ 40s] [68/110] installing xz-5.2.4-1.50 [ 40s] [69/110] installing libdw-0.153-1.9 [ 44s] [70/110] installing linux-glibc-devel-3.10-1.64 [ 45s] [71/110] installing file-5.37-1.43 [ 45s] [72/110] installing glibc-locale-2.24-1.19 [ 46s] [73/110] installing libmount-2.30-1.1 [ 47s] [74/110] installing tar-1.17-1.1 [ 47s] [75/110] installing gzip-1.3.12-1.66 [ 47s] [76/110] installing libfdisk-2.30-1.1 [ 47s] [77/110] installing libncurses6-6.1-1.41 [ 49s] [78/110] installing libxslt-1.1.31-1.1 [ 50s] [79/110] installing pam-1.1.6-1.1 [ 51s] [80/110] installing perl-5.30.0-1.10 [ 54s] [81/110] installing tzdata-2019a-1.1 [ 55s] [82/110] installing elfutils-0.153-1.9 [ 55s] [83/110] installing gcc-6.2.1-1.3 [ 57s] [84/110] installing build-mkbaselibs-20120927-1.1 [ 57s] [85/110] installing libncurses-6.1-1.41 [ 57s] [86/110] installing glibc-devel-2.24-1.19 [ 57s] [87/110] installing qemu-accel-x86_64-armv7l-0.4-2.1 [ 68s] [88/110] installing autoconf-2.69-1.23 [ 69s] [89/110] installing less-466-1.1 [ 69s] [90/110] installing libreadline-5.2-1.24 [ 69s] [91/110] installing procps-ng-3.3.15-1.1 [ 70s] [92/110] installing libxslt-tools-1.1.31-1.1 [ 70s] [93/110] installing ncurses-devel-6.1-1.41 [ 70s] [94/110] installing readline-devel-5.2-1.24 [ 70s] [95/110] installing automake-1.15.1-1.41 [ 70s] [96/110] installing zlib-devel-1.2.11-1.67 [ 71s] [97/110] installing libxml2-tools-2.9.7-1.21 [ 71s] [98/110] installing build-20120927-1.1 [ 71s] [99/110] installing libgpg-error-devel-1.27-1.1 [ 71s] [100/110] installing util-linux-2.30-1.1 [ 71s] [101/110] installing libopenssl1.1-devel-1.1.1d-1.27 [ 71s] [102/110] installing libtool-2.4.2-1.52 [ 71s] [103/110] installing util-linux-su-2.30-1.1 [ 72s] [104/110] installing libgcrypt-devel-1.8.3-1.1 [ 72s] [105/110] installing libxml2-devel-2.9.7-1.21 [ 72s] [106/110] installing libxslt-devel-1.1.31-1.1 [ 72s] [107/110] installing nss-3.34.1-1.44 [ 73s] [108/110] installing libsoftokn3-3.34.1-1.44 [ 73s] [109/110] installing rpm-4.11.0.1-1.32 [ 74s] [110/110] installing rpm-build-4.11.0.1-1.32 [ 74s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 74s] now finalizing build dir... [ 74s] Running build time source services... [ 74s] build target is armv7l-tizen-linux [ 74s] ----------------------------------------------------------------- [ 74s] I have the following modifications for xmlsec1.spec: [ 74s] 5c5 [ 74s] < Release: 0 [ 74s] --- [ 74s] > Release: 1.2 [ 74s] 136a137 [ 74s] > %changelog [ 74s] ----------------------------------------------------------------- [ 74s] ----- building xmlsec1.spec (user abuild) [ 74s] ----------------------------------------------------------------- [ 74s] ----------------------------------------------------------------- [ 75s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified:Mobile:Hotfix/standard/21255eba9506203453817c46b0973108-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 75s] Building target platforms: armv7l-tizen-linux [ 75s] Building for target armv7l-tizen-linux [ 75s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Mu2FxC [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + rm -rf xmlsec1-1.2.28 [ 75s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.28.tar.gz [ 75s] + /bin/tar -xf - [ 75s] + STATUS=0 [ 75s] + '[' 0 -ne 0 ']' [ 75s] + cd xmlsec1-1.2.28 [ 75s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 75s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 75s] + exit 0 [ 75s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XJ3LBV [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd xmlsec1-1.2.28 [ 75s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 75s] + LANG=C [ 75s] + export LANG [ 75s] + unset DISPLAY [ 75s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 75s] + export CFLAGS [ 75s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 75s] + export CXXFLAGS [ 75s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 75s] + export FFLAGS [ 75s] + LDFLAGS= [ 75s] + export LDFLAGS [ 75s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 75s] + export CFLAGS [ 75s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 75s] + export CXXFLAGS [ 75s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 75s] + export FFLAGS [ 75s] + autoreconf -v --install --force [ 79s] autoreconf: Entering directory `.' [ 79s] autoreconf: configure.ac: not using Gettext [ 80s] autoreconf: running: aclocal --force -I m4 [ 93s] autoreconf: configure.ac: tracing [ 95s] autoreconf: running: libtoolize --copy --force [ 96s] libtoolize: putting auxiliary files in `.'. [ 96s] libtoolize: copying file `./ltmain.sh' [ 96s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 96s] libtoolize: copying file `m4/libtool.m4' [ 97s] libtoolize: copying file `m4/ltoptions.m4' [ 97s] libtoolize: copying file `m4/ltsugar.m4' [ 97s] libtoolize: copying file `m4/ltversion.m4' [ 97s] libtoolize: copying file `m4/lt~obsolete.m4' [ 114s] autoreconf: running: /usr/bin/autoconf --force [ 119s] autoreconf: running: /usr/bin/autoheader --force [ 122s] autoreconf: running: automake --add-missing --copy --force-missing [ 126s] configure.ac:37: installing './compile' [ 126s] configure.ac:14: installing './config.guess' [ 126s] configure.ac:14: installing './config.sub' [ 126s] configure.ac:25: installing './install-sh' [ 127s] configure.ac:25: installing './missing' [ 128s] apps/Makefile.am: installing './depcomp' [ 143s] autoreconf: Leaving directory `.' [ 143s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 143s] configure: WARNING: unrecognized options: --enable-dynamic [ 143s] checking build system type... armv7l-tizen-linux-gnueabi [ 143s] checking host system type... armv7l-tizen-linux-gnueabi [ 143s] checking for a BSD-compatible install... /bin/install -c [ 143s] checking whether build environment is sane... yes [ 143s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 143s] checking for gawk... gawk [ 143s] checking whether make sets $(MAKE)... yes [ 143s] checking whether make supports nested variables... yes [ 144s] checking whether UID '399' is supported by ustar format... yes [ 144s] checking whether GID '399' is supported by ustar format... yes [ 144s] checking how to create a ustar tar archive... gnutar [ 144s] checking whether to enable maintainer-specific portions of Makefiles... no [ 144s] checking whether make supports nested variables... (cached) yes [ 144s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 144s] checking whether the C compiler works... yes [ 144s] checking for C compiler default output file name... a.out [ 144s] checking for suffix of executables... [ 144s] checking whether we are cross compiling... no [ 144s] checking for suffix of object files... o [ 144s] checking whether we are using the GNU C compiler... yes [ 144s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 144s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 144s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 144s] checking for style of include used by make... GNU [ 144s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 144s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 144s] checking for grep that handles long lines and -e... /bin/grep [ 144s] checking for egrep... /bin/grep -E [ 144s] checking for ANSI C header files... yes [ 144s] checking how to print strings... printf [ 144s] checking for a sed that does not truncate output... /bin/sed [ 144s] checking for fgrep... /bin/grep -F [ 144s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 144s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 144s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 144s] checking the name lister (/bin/nm -B) interface... BSD nm [ 144s] checking whether ln -s works... yes [ 144s] checking the maximum length of command line arguments... 1572864 [ 144s] checking whether the shell understands some XSI constructs... yes [ 144s] checking whether the shell understands "+="... yes [ 144s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 144s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 144s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 144s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 144s] checking for objdump... objdump [ 144s] checking how to recognize dependent libraries... pass_all [ 144s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 144s] checking for dlltool... no [ 144s] checking how to associate runtime and link libraries... printf %s\n [ 144s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 144s] checking for ar... ar [ 144s] checking for archiver @FILE support... @ [ 144s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 144s] checking for strip... strip [ 144s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 144s] checking for ranlib... ranlib [ 144s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 144s] checking for sysroot... no [ 144s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 144s] checking for mt... no [ 144s] checking if : is a manifest tool... no [ 144s] checking for sys/types.h... yes [ 144s] checking for sys/stat.h... yes [ 144s] checking for stdlib.h... yes [ 144s] checking for string.h... yes [ 144s] checking for memory.h... yes [ 144s] checking for strings.h... yes [ 144s] checking for inttypes.h... yes [ 145s] checking for stdint.h... yes [ 145s] checking for unistd.h... yes [ 145s] checking for dlfcn.h... yes [ 145s] checking for objdir... .libs [ 145s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 145s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 145s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 145s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 145s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 145s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 145s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 145s] checking whether -lc should be explicitly linked in... no [ 145s] checking dynamic linker characteristics... GNU/Linux ld.so [ 145s] checking how to hardcode library paths into programs... immediate [ 145s] checking whether stripping libraries is possible... yes [ 145s] checking if libtool supports shared libraries... yes [ 145s] checking whether to build shared libraries... yes [ 145s] checking whether to build static libraries... yes [ 145s] checking for cp... /bin/cp [ 145s] checking for mv... /bin/mv [ 145s] checking for tar... /bin/tar [ 145s] checking for perl... /bin/perl [ 145s] checking for help2man... no [ 145s] checking for xsltproc... /bin/xsltproc [ 145s] checking for man2html... no [ 145s] checking for gtkdoc-mkhtml... no [ 145s] checking for gtkdoc-mkdb... no [ 145s] checking for gtkdoc-scan... no [ 145s] checking for dirent.h that defines DIR... yes [ 145s] checking for library containing opendir... none required [ 145s] checking for ANSI C header files... (cached) yes [ 145s] checking stdio.h usability... yes [ 145s] checking stdio.h presence... yes [ 145s] checking for stdio.h... yes [ 145s] checking for stdlib.h... (cached) yes [ 145s] checking for string.h... (cached) yes [ 145s] checking ctype.h usability... yes [ 145s] checking ctype.h presence... yes [ 145s] checking for ctype.h... yes [ 145s] checking errno.h usability... yes [ 145s] checking errno.h presence... yes [ 145s] checking for errno.h... yes [ 145s] checking ansidecl.h usability... no [ 145s] checking ansidecl.h presence... no [ 145s] checking for ansidecl.h... no [ 145s] checking time.h usability... yes [ 145s] checking time.h presence... yes [ 145s] checking for time.h... yes [ 145s] checking for strchr... yes [ 145s] checking for strrchr... yes [ 146s] checking for printf... yes [ 146s] checking for sprintf... yes [ 146s] checking for fprintf... yes [ 146s] checking for snprintf... yes [ 146s] checking for vfprintf... yes [ 146s] checking for vsprintf... yes [ 146s] checking for vsnprintf... yes [ 146s] checking for sscanf... yes [ 146s] checking for timegm... yes [ 146s] checking for development environment... disabled [ 146s] checking for man pages build... disabled [ 146s] checking for docs build... disabled [ 146s] checking for shared library suffix... .so [ 146s] checking for __FUNCTION__ or __func__... __func__ [ 146s] checking size of size_t... 4 [ 146s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 146s] checking pkg-config is at least version 0.9.0... yes [ 146s] checking for LIBXML... yes [ 146s] checking for libxml2 library >= 2.8.0... yes [ 147s] checking for LIBXSLT... yes [ 147s] checking for libxslt library >= 1.0.20... yes [ 147s] checking for OPENSSL... no [ 147s] checking for openssl library installation in the typical folders... yes ("-I/usr/include -L/usr/lib") [ 147s] checking for openssl library >= 1.0.0... yes (openssl version '1.1.0') [ 147s] checking for NSPR... no [ 147s] checking for NSPR... no [ 147s] checking for NSPR... no [ 147s] checking for NSPR... no [ 147s] checking for NSS... no [ 147s] checking for NSS... no [ 148s] checking for NSS... no [ 148s] checking for NSS... no [ 148s] checking for nspr library installation in the typical folders... not found [ 148s] checking for nss library installation in the typical folders... not found [ 148s] checking for nspr library installation... not found [ 148s] checking for nss library installation... not found [ 148s] checking for nspr library >= 4.4.1... no [ 148s] checking for nss library >= 3.11.1... no [ 148s] checking for GCRYPT... no [ 148s] checking for GCRYPT... no [ 148s] checking for GCRYPT... no [ 148s] checking for GCRYPT... no [ 148s] checking for libgcrypt-config... /bin/libgcrypt-config [ 148s] checking for libgcrypt library >= 1.4.0... yes [ 148s] checking for libgnutls library >= 2.8.0... disabled [ 148s] checking for mscrypto... not found [ 148s] checking for mscng... not found [ 148s] checking for default crypto library... yes ("openssl") [ 148s] checking for MD5 support... yes [ 148s] checking for RIPEMD-160 support... yes [ 148s] checking for SHA1 support... yes [ 148s] checking for SHA224 support... yes [ 148s] checking for SHA256 support... yes [ 148s] checking for SHA384 support... yes [ 148s] checking for SHA512 support... yes [ 148s] checking for HMAC support... yes [ 148s] checking for DSA support... yes [ 148s] checking for RSA support... yes [ 148s] checking for x509 support... yes [ 148s] checking for DES support... yes [ 148s] checking for AES support... yes [ 148s] checking for GOST support... disabled [ 148s] checking for EXPERMIENTAL GOST2012 support... disabled [ 148s] checking for XMLDSig support... yes [ 148s] checking for XMLEnc support... yes [ 148s] checking for soap support... disabled [ 148s] checking for mans... yes [ 148s] checking for docs... yes [ 148s] checking for apps... yes [ 148s] checking for static linking... disabled [ 148s] checking for xmlsec-crypto dynamic loading support... disabled [ 148s] checking for xmlsec-crypto dynamic loading support in command line tool... disabled [ 148s] checking for docs folder... $(htmldir) [ 148s] checking for Simple Keys Manager testing... yes [ 148s] checking for templates testing... yes [ 148s] checking for debugging... disabled [ 148s] checking for warnings as errors... disabled [ 148s] checking for profiling... disabled [ 148s] checking for pedantic... disabled [ 149s] checking that generated files are newer than configure... done [ 149s] configure: creating ./config.status [ 149s] config.status: creating include/xmlsec/openssl/Makefile [ 149s] config.status: creating src/openssl/Makefile [ 149s] config.status: creating include/xmlsec/gcrypt/Makefile [ 149s] config.status: creating src/gcrypt/Makefile [ 149s] config.status: creating include/xmlsec/version.h [ 149s] config.status: creating Makefile [ 149s] config.status: creating include/Makefile [ 149s] config.status: creating include/xmlsec/Makefile [ 149s] config.status: creating include/xmlsec/private/Makefile [ 149s] config.status: creating src/Makefile [ 149s] config.status: creating apps/Makefile [ 149s] config.status: creating docs/Makefile [ 149s] config.status: creating docs/api/Makefile [ 149s] config.status: creating man/Makefile [ 149s] config.status: creating xmlsec1-openssl.pc [ 149s] config.status: creating xmlsec1-gnutls.pc [ 150s] config.status: creating xmlsec1-gcrypt.pc [ 150s] config.status: creating xmlsec1-nss.pc [ 150s] config.status: creating xmlsec1.spec [ 150s] config.status: creating xmlsec1Conf.sh [ 150s] config.status: creating xmlsec1-config [ 150s] config.status: creating config.h [ 150s] config.status: executing depfiles commands [ 152s] config.status: executing libtool commands [ 152s] configure: WARNING: unrecognized options: --enable-dynamic [ 152s] + /bin/make -j4 CFLAGS+=-fPIE LDFLAGS+=-pie [ 152s] /bin/make all-recursive [ 152s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 152s] Making all in include [ 152s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 152s] Making all in xmlsec [ 152s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 152s] Making all in private [ 152s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 152s] make[4]: Nothing to be done for 'all'. [ 152s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 152s] Making all in openssl [ 152s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 152s] make[4]: Nothing to be done for 'all'. [ 152s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 152s] Making all in gcrypt [ 152s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 152s] make[4]: Nothing to be done for 'all'. [ 152s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 152s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 152s] make[4]: Nothing to be done for 'all-am'. [ 152s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 152s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 152s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 152s] make[3]: Nothing to be done for 'all-am'. [ 152s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 152s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 152s] Making all in src [ 152s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 152s] Making all in . [ 152s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 152s] CC app.lo [ 152s] CC base64.lo [ 152s] CC bn.lo [ 152s] CC buffer.lo [ 152s] CC c14n.lo [ 152s] CC dl.lo [ 152s] CC enveloped.lo [ 152s] CC errors.lo [ 152s] CC io.lo [ 153s] CC keyinfo.lo [ 153s] CC keys.lo [ 153s] CC keysdata.lo [ 153s] CC keysmngr.lo [ 153s] CC kw_aes_des.lo [ 153s] CC list.lo [ 153s] CC membuf.lo [ 154s] CC nodeset.lo [ 154s] CC parser.lo [ 154s] CC relationship.lo [ 154s] CC strings.lo [ 154s] CC templates.lo [ 154s] CC transforms.lo [ 154s] CC x509.lo [ 154s] CC xmldsig.lo [ 155s] CC xmlenc.lo [ 155s] CC xmlsec.lo [ 156s] CC xmltree.lo [ 156s] CC xpath.lo [ 156s] CC xslt.lo [ 157s] CCLD libxmlsec1.la [ 157s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 157s] Making all in openssl [ 157s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 157s] CC libxmlsec1_openssl_la-bn.lo [ 157s] CC libxmlsec1_openssl_la-ciphers.lo [ 157s] CC libxmlsec1_openssl_la-crypto.lo [ 157s] CC libxmlsec1_openssl_la-app.lo [ 158s] CC libxmlsec1_openssl_la-digests.lo [ 158s] CC libxmlsec1_openssl_la-evp.lo [ 158s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 158s] CC libxmlsec1_openssl_la-hmac.lo [ 158s] CC libxmlsec1_openssl_la-kw_aes.lo [ 159s] CC libxmlsec1_openssl_la-kw_des.lo [ 159s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 159s] CC libxmlsec1_openssl_la-signatures.lo [ 159s] CC libxmlsec1_openssl_la-symkeys.lo [ 159s] CC libxmlsec1_openssl_la-x509.lo [ 160s] CC libxmlsec1_openssl_la-x509vfy.lo [ 161s] CCLD libxmlsec1-openssl.la [ 161s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 161s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 161s] Making all in gcrypt [ 161s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 161s] CC libxmlsec1_gcrypt_la-app.lo [ 161s] CC libxmlsec1_gcrypt_la-asn1.lo [ 161s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 161s] CC libxmlsec1_gcrypt_la-crypto.lo [ 162s] CC libxmlsec1_gcrypt_la-digests.lo [ 162s] CC libxmlsec1_gcrypt_la-hmac.lo [ 162s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 162s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 162s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 162s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 162s] CC libxmlsec1_gcrypt_la-signatures.lo [ 163s] CCLD libxmlsec1-gcrypt.la [ 163s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 164s] Making all in apps [ 164s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 164s] CC xmlsec.o [ 164s] CC crypto.o [ 164s] CC cmdline.o [ 164s] CCLD xmlsec1 [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 164s] Making all in man [ 164s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 164s] make[2]: Nothing to be done for 'all'. [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 164s] Making all in docs [ 164s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 164s] Making all in api [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 164s] Copying api-docs... [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 164s] make[3]: Nothing to be done for 'all-am'. [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 164s] ======= Run 'make docs' in the xmlsec/docs folder to rebuild docs [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 164s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 164s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 164s] + exit 0 [ 164s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.36xdcO [ 164s] + umask 022 [ 164s] + cd /home/abuild/rpmbuild/BUILD [ 164s] + cd xmlsec1-1.2.28 [ 164s] + LANG=C [ 164s] + export LANG [ 164s] + unset DISPLAY [ 164s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm [ 164s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm [ 164s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm install [ 164s] Making install in include [ 164s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 164s] Making install in xmlsec [ 164s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] Making install in private [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 164s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 164s] /bin/make install-exec-hook [ 164s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 164s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/private [ 164s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 164s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/private' [ 164s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/private' [ 164s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 164s] Making install in openssl [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 164s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 164s] /bin/make install-exec-hook [ 164s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 164s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/openssl [ 164s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 164s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/openssl' [ 164s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/openssl' [ 164s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 164s] Making install in gcrypt [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 164s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 164s] /bin/make install-exec-hook [ 164s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 164s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/gcrypt [ 164s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 164s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 164s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 164s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] /bin/make install-exec-hook [ 164s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec [ 164s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec' [ 164s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/include/xmlsec1/xmlsec' [ 164s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 164s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 164s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 164s] make[3]: Nothing to be done for 'install-exec-am'. [ 164s] make[3]: Nothing to be done for 'install-data-am'. [ 164s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 164s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 164s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 164s] Making install in src [ 165s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 165s] Making install in . [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 165s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 165s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 165s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.28 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1.so.1.2.28 [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so.1; }; }) [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so; }; }) [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1.la [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1.a [ 165s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1.a [ 165s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1.a [ 165s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 165s] make[3]: Nothing to be done for 'install-data-am'. [ 165s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 165s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 165s] Making install in openssl [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 165s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 165s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 165s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 165s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-openssl.la -rpath /usr/lib libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -Wl,-rpath-link -Wl,/usr/lib -L/usr/lib -lcrypto -ldl -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm) [ 165s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-openssl.so.1.2.28 [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1; }; }) [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so; }; }) [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-openssl.la [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-openssl.a [ 165s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-openssl.a [ 165s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-openssl.a [ 165s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 165s] make[3]: Nothing to be done for 'install-data-am'. [ 165s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 165s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 165s] Making install in gcrypt [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 165s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 165s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 165s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 165s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-gcrypt.la -rpath /usr/lib libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -lgcrypt -lgpg-error -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm) [ 165s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.28 [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1; }; }) [ 165s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so; }; }) [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-gcrypt.la [ 165s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 165s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 165s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 165s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 165s] make[3]: Nothing to be done for 'install-data-am'. [ 165s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 165s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 165s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 165s] Making install in apps [ 165s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 165s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/bin' [ 165s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/bin' [ 165s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib' [ 165s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/libxmlsec1.la' has not been installed in `/usr/lib' [ 165s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib' [ 165s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/bin/xmlsec1 [ 165s] make[2]: Nothing to be done for 'install-data-am'. [ 165s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 165s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 165s] Making install in man [ 165s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 165s] make[2]: Nothing to be done for 'install-exec-am'. [ 165s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/man/man1' [ 165s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/man/man1' [ 165s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 165s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 165s] Making install in docs [ 165s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 165s] Making install in api [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 165s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 165s] make[3]: Nothing to be done for 'install-exec-am'. [ 165s] make[3]: Nothing to be done for 'install-data-am'. [ 165s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 165s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 165s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 165s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 165s] make[3]: Nothing to be done for 'install-exec-am'. [ 165s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1 [ 165s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1/images [ 165s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1/api [ 165s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1/api/images [ 165s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1 [ 165s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1 [ 165s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1/images [ 165s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1/api [ 166s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 166s] Makefile:831: recipe for target 'install-data-local' failed [ 166s] make[3]: [install-data-local] Error 1 (ignored) [ 166s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1/api/images [ 166s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 166s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 166s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 166s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 166s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 166s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/bin' [ 166s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/bin' [ 166s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 166s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib' [ 166s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/aclocal' [ 166s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/aclocal' [ 166s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig' [ 166s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig' [ 166s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 166s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 166s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/info/dir [ 166s] + xargs rm -f -- [ 166s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm -regex '.*\.la$' [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/info [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/packages [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1 [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc/xmlsec1-1.2.28 [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/gtk-doc [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/doc [ 166s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/man [ 166s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm -regex '.*/man/man./.*.[0-9]' [ 166s] + xargs rm -f -- [ 166s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm -regex '.*/man/../man./.*.[0-9]' [ 166s] + xargs rm -f -- [ 166s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 166s] + xargs rm -f -- [ 166s] + _target= [ 166s] + _symlinks=0 [ 166s] + _files=() [ 166s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm [ 166s] + read _file [ 166s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 166s] + _files+=($_file) [ 166s] + read _file [ 166s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 166s] + _files+=($_file) [ 166s] + read _file [ 166s] + test -z [ 166s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 166s] ++ for i in '${_files[*]}' [ 166s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 166s] ++ for i in '${_files[*]}' [ 166s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 166s] ++ sort [ 166s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 166s] ++ seq 1 1 [ 166s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 166s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 166s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 166s] + test 0 = 1 [ 166s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 166s] + _files=() [ 166s] + read _file [ 166s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28 [ 166s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/bin/xmlsec1 [ 166s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.28 [ 167s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1-openssl.so.1.2.28 [ 167s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/lib/libxmlsec1.so.1.2.28 [ 167s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 167s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 167s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 167s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 167s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 167s] 4190 blocks [ 167s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debuginfo.manifest [ 167s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debugsource.manifest [ 167s] + /usr/lib/rpm/check-buildroot [ 167s] + /usr/lib/rpm//brp-compress [ 167s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 168s] + /usr/lib/rpm/brp-python-hardlink [ 168s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm [ 168s] Processing files: xmlsec1-1.2.28-1.2.armv7l [ 168s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 168s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 168s] [ 168s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.FYHtZS [ 168s] + umask 022 [ 168s] + cd /home/abuild/rpmbuild/BUILD [ 168s] + cd xmlsec1-1.2.28 [ 168s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1 [ 168s] + export LICENSEDIR [ 168s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1 [ 168s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1 [ 168s] + exit 0 [ 168s] Provides: libxmlsec1.so.1 xmlsec1 = 1.2.28-1.2 xmlsec1(armv7l-32) = 1.2.28-1.2 [ 168s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 168s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 168s] Requires(post): /sbin/ldconfig [ 168s] Requires(postun): /sbin/ldconfig [ 168s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.2) libxmlsec1-openssl.so.1 libxmlsec1.so.1 libxslt.so.1 libxslt.so.1(LIBXML2_1.0.11) libxslt.so.1(LIBXML2_1.0.22) rtld(GNU_HASH) [ 168s] Processing files: xmlsec1-debugsource-1.2.28-1.2.armv7l [ 168s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 168s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 168s] [ 168s] Provides: xmlsec1-debugsource = 1.2.28-1.2 xmlsec1-debugsource(armv7l-32) = 1.2.28-1.2 [ 168s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 168s] Processing files: xmlsec1-gcrypt-1.2.28-1.2.armv7l [ 168s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 168s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 168s] [ 168s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.3xF2ZX [ 168s] + umask 022 [ 168s] + cd /home/abuild/rpmbuild/BUILD [ 168s] + cd xmlsec1-1.2.28 [ 168s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 168s] + export LICENSEDIR [ 168s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 168s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 168s] + exit 0 [ 168s] Provides: libxmlsec1-gcrypt.so.1 xmlsec1-gcrypt = 1.2.28-1.2 xmlsec1-gcrypt(armv7l-32) = 1.2.28-1.2 [ 168s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 168s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 168s] Requires(post): /sbin/ldconfig [ 168s] Requires(postun): /sbin/ldconfig [ 168s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxmlsec1.so.1 rtld(GNU_HASH) [ 168s] Processing files: xmlsec1-openssl-1.2.28-1.2.armv7l [ 168s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 168s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 168s] [ 168s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.tcVOb3 [ 168s] + umask 022 [ 168s] + cd /home/abuild/rpmbuild/BUILD [ 168s] + cd xmlsec1-1.2.28 [ 168s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-openssl [ 168s] + export LICENSEDIR [ 168s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-openssl [ 168s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-openssl [ 168s] + exit 0 [ 168s] Provides: libxmlsec1-openssl.so.1 xmlsec1-openssl = 1.2.28-1.2 xmlsec1-openssl(armv7l-32) = 1.2.28-1.2 [ 168s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 168s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 168s] Requires(post): /sbin/ldconfig [ 168s] Requires(postun): /sbin/ldconfig [ 168s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.1 libcrypto.so.1.1(OPENSSL_1_1_0) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxmlsec1.so.1 rtld(GNU_HASH) [ 168s] Processing files: xmlsec1-devel-1.2.28-1.2.armv7l [ 168s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 168s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 168s] [ 168s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.NTwwy8 [ 168s] + umask 022 [ 168s] + cd /home/abuild/rpmbuild/BUILD [ 168s] + cd xmlsec1-1.2.28 [ 168s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-devel [ 168s] + export LICENSEDIR [ 168s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-devel [ 168s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-devel [ 168s] + exit 0 [ 169s] Provides: pkgconfig(xmlsec1) = 1.2.28 pkgconfig(xmlsec1-gcrypt) = 1.2.28 pkgconfig(xmlsec1-openssl) = 1.2.28 xmlsec1-devel = 1.2.28-1.2 xmlsec1-devel(armv7l-32) = 1.2.28-1.2 [ 169s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 169s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1 libxmlsec1-openssl.so.1 libxmlsec1.so.1 pkgconfig(libxml-2.0) >= 2.8.0 pkgconfig(libxslt) >= 1.0.20 [ 169s] Processing files: xmlsec1-devel-static-1.2.28-1.2.armv7l [ 169s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 169s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 169s] [ 169s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.7SAJcg [ 169s] + umask 022 [ 169s] + cd /home/abuild/rpmbuild/BUILD [ 169s] + cd xmlsec1-1.2.28 [ 169s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-devel-static [ 169s] + export LICENSEDIR [ 169s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-devel-static [ 169s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm/usr/share/licenses/xmlsec1-devel-static [ 169s] + exit 0 [ 169s] Provides: xmlsec1-devel-static = 1.2.28-1.2 xmlsec1-devel-static(armv7l-32) = 1.2.28-1.2 [ 169s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 169s] Processing files: xmlsec1-debuginfo-1.2.28-1.2.armv7l [ 169s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 169s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 169s] [ 169s] warning: File listed twice: /usr/lib/debug/.build-id [ 169s] Provides: xmlsec1-debuginfo = 1.2.28-1.2 xmlsec1-debuginfo(armv7l-32) = 1.2.28-1.2 [ 169s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 169s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.28-1.2.armv7l [ 169s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 169s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 169s] [ 169s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.28-1.2 xmlsec1-gcrypt-debuginfo(armv7l-32) = 1.2.28-1.2 [ 169s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 169s] Processing files: xmlsec1-openssl-debuginfo-1.2.28-1.2.armv7l [ 169s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 169s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 169s] [ 169s] Provides: xmlsec1-openssl-debuginfo = 1.2.28-1.2 xmlsec1-openssl-debuginfo(armv7l-32) = 1.2.28-1.2 [ 169s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 169s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm [ 169s] warning: Could not canonicalize hostname: obsnw02 [ 169s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-1.2.src.rpm [ 170s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.28-1.2.armv7l.rpm [ 170s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.28-1.2.armv7l.rpm [ 170s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.28-1.2.armv7l.rpm [ 170s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.28-1.2.armv7l.rpm [ 171s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.28-1.2.armv7l.rpm [ 171s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.28-1.2.armv7l.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.28-1.2.armv7l.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.28-1.2.armv7l.rpm [ 172s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.28-1.2.armv7l.rpm [ 172s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.NlYgiv [ 172s] + umask 022 [ 172s] + cd /home/abuild/rpmbuild/BUILD [ 172s] + cd xmlsec1-1.2.28 [ 172s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.2.arm [ 172s] + exit 0 [ 172s] ... checking for files with abuild user/group [ 172s] ... creating baselibs [ 173s] ... comparing built packages with the former built [ 173s] /usr/lib/build/pkg-diff.sh [ 173s] compare /.build.oldpackages/xmlsec1-1.2.28-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-1.2.src.rpm [ 173s] This is not a prerelease project. Compare the project name. [ 173s] comparing rpmtags [ 174s] comparing RELEASE [ 174s] comparing PROVIDES [ 174s] comparing scripts [ 174s] comparing filelist [ 174s] comparing file checksum [ 174s] RPM meta information is identical [ 174s] compare /.build.oldpackages/xmlsec1-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.28-1.2.armv7l.rpm [ 174s] Comparing xmlsec1-1.2.28-1.1.armv7l.rpm to xmlsec1-1.2.28-1.2.armv7l.rpm [ 174s] This is not a prerelease project. Compare the project name. [ 174s] comparing rpmtags [ 174s] comparing RELEASE [ 174s] comparing PROVIDES [ 174s] comparing scripts [ 174s] comparing filelist [ 174s] comparing file checksum [ 174s] creating rename script [ 174s] RPM file checksum differs. [ 174s] Extracting packages [ 174s] /usr/bin/xmlsec1 differs in ELF section .dynsym [ 174s] --- /tmp/tmp.BBsk114439/tmp.YoNd114597 2020-10-27 08:26:09.870614620 +0000 [ 174s] +++ /tmp/tmp.BBsk114439/tmp.kZTz114599 2020-10-27 08:26:09.870614620 +0000 [ 174s] @@ -24,14 +24,14 @@ [ 174s] 0348 850b0000 00000000 00000000 11000000 ................ [ 174s] 0358 08050000 00000000 00000000 12000000 ................ [ 174s] 0368 b00a0000 00000000 00000000 12000000 ................ [ 174s] - 0378 61080000 00000000 00000000 12000000 a............... [ 174s] + 0378 0e080000 00000000 00000000 12000000 ................ [ 174s] 0388 a8060000 00000000 00000000 12000000 ................ [ 174s] 0398 7f0a0000 00000000 00000000 12000000 ................ [ 174s] 03a8 ae080000 00000000 00000000 12000000 ................ [ 174s] 03b8 2e030000 00000000 00000000 12000000 ................ [ 174s] 03c8 32000000 00000000 00000000 12000000 2............... [ 174s] 03d8 07030000 00000000 00000000 12000000 ................ [ 174s] - 03e8 4b080000 00000000 00000000 12000000 K............... [ 174s] + 03e8 3f080000 00000000 00000000 12000000 ?............... [ 174s] 03f8 17040000 00000000 00000000 12000000 ................ [ 174s] 0408 3d070000 00000000 00000000 12000000 =............... [ 174s] 0418 3e000000 00000000 00000000 12000000 >............... [ 174s] @@ -48,10 +48,10 @@ [ 174s] 04c8 e40a0000 00000000 00000000 12000000 ................ [ 174s] 04d8 0a060000 00000000 00000000 12000000 ................ [ 174s] 04e8 a5030000 00000000 00000000 12000000 ................ [ 174s] - 04f8 36080000 00000000 00000000 12000000 6............... [ 174s] + 04f8 2a080000 00000000 00000000 12000000 *............... [ 174s] 0508 e4020000 00000000 00000000 12000000 ................ [ 174s] 0518 790a0000 00000000 00000000 12000000 y............... [ 174s] - 0528 fb070000 00000000 00000000 12000000 ................ [ 174s] + 0528 6a080000 00000000 00000000 12000000 j............... [ 174s] 0538 61060000 00000000 00000000 12000000 a............... [ 174s] 0548 9e090000 00000000 00000000 12000000 ................ [ 174s] 0558 b60a0000 00000000 00000000 12000000 ................ [ 174s] @@ -95,10 +95,10 @@ [ 174s] 07b8 6b0b0000 00000000 00000000 12000000 k............... [ 174s] 07c8 ec030000 00000000 00000000 12000000 ................ [ 174s] 07d8 52070000 00000000 00000000 12000000 R............... [ 174s] - 07e8 23080000 00000000 00000000 12000000 #............... [ 174s] + 07e8 fb070000 00000000 00000000 12000000 ................ [ 174s] 07f8 83000000 00000000 00000000 11000000 ................ [ 174s] 0808 000b0000 00000000 00000000 12000000 ................ [ 174s] - 0818 0e080000 00000000 00000000 12000000 ................ [ 174s] + 0818 55080000 00000000 00000000 12000000 U............... [ 174s] 0828 cb080000 00000000 00000000 12000000 ................ [ 174s] 0838 280b0000 00000000 00000000 12000000 (............... [ 174s] 0848 060b0000 00000000 00000000 12000000 ................ [ 174s] /usr/bin/xmlsec1 differs in ELF section .dynstr [ 174s] --- /tmp/tmp.BBsk114439/tmp.YoNd114597 2020-10-27 08:26:09.874614582 +0000 [ 174s] +++ /tmp/tmp.BBsk114439/tmp.kZTz114599 2020-10-27 08:26:09.878614544 +0000 [ 174s] @@ -129,15 +129,15 @@ [ 174s] 13f8 6d49644c 69737444 65627567 44756d70 mIdListDebugDump [ 174s] 1408 00786d6c 53656354 6d706c53 69676e61 .xmlSecTmplSigna [ 174s] 1418 74757265 4164644f 626a6563 74006c69 tureAddObject.li [ 174s] - 1428 6278736c 742e736f 2e310078 736c7453 bxslt.so.1.xsltS [ 174s] - 1438 65637572 69747946 6f726269 64007873 ecurityForbid.xs [ 174s] - 1448 6c744e65 77536563 75726974 79507265 ltNewSecurityPre [ 174s] - 1458 66730078 736c7443 6c65616e 7570476c fs.xsltCleanupGl [ 174s] - 1468 6f62616c 73007873 6c745365 74536563 obals.xsltSetSec [ 174s] - 1478 75726974 79507265 66730078 736c7446 urityPrefs.xsltF [ 174s] - 1488 72656553 65637572 69747950 72656673 reeSecurityPrefs [ 174s] - 1498 0078736c 74536574 44656661 756c7453 .xsltSetDefaultS [ 174s] - 14a8 65637572 69747950 72656673 006c6962 ecurityPrefs.lib [ 174s] + 1428 6278736c 742e736f 2e310078 736c7443 bxslt.so.1.xsltC [ 174s] + 1438 6c65616e 7570476c 6f62616c 73007873 leanupGlobals.xs [ 174s] + 1448 6c745365 74446566 61756c74 53656375 ltSetDefaultSecu [ 174s] + 1458 72697479 50726566 73007873 6c745365 rityPrefs.xsltSe [ 174s] + 1468 74536563 75726974 79507265 66730078 tSecurityPrefs.x [ 174s] + 1478 736c7446 72656553 65637572 69747950 sltFreeSecurityP [ 174s] + 1488 72656673 0078736c 744e6577 53656375 refs.xsltNewSecu [ 174s] + 1498 72697479 50726566 73007873 6c745365 rityPrefs.xsltSe [ 174s] + 14a8 63757269 7479466f 72626964 006c6962 curityForbid.lib [ 174s] 14b8 786d6c32 2e736f2e 3200786d 6c537472 xml2.so.2.xmlStr [ 174s] 14c8 45717561 6c00786d 6c416464 49440078 Equal.xmlAddID.x [ 174s] 14d8 6d6c5661 6c696461 74654474 6400786d mlValidateDtd.xm [ 175s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.28-1.2.armv7l.rpm [ 175s] skipping -debuginfo package [ 175s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.28-1.2.armv7l.rpm [ 175s] Comparing xmlsec1-debugsource-1.2.28-1.1.armv7l.rpm to xmlsec1-debugsource-1.2.28-1.2.armv7l.rpm [ 175s] This is not a prerelease project. Compare the project name. [ 175s] comparing rpmtags [ 175s] comparing RELEASE [ 175s] comparing PROVIDES [ 175s] comparing scripts [ 175s] comparing filelist [ 175s] comparing file checksum [ 175s] creating rename script [ 175s] RPM meta information is identical [ 175s] compare /.build.oldpackages/xmlsec1-devel-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.28-1.2.armv7l.rpm [ 175s] Comparing xmlsec1-devel-1.2.28-1.1.armv7l.rpm to xmlsec1-devel-1.2.28-1.2.armv7l.rpm [ 175s] This is not a prerelease project. Compare the project name. [ 175s] comparing rpmtags [ 175s] comparing RELEASE [ 175s] comparing PROVIDES [ 175s] comparing scripts [ 175s] comparing filelist [ 175s] comparing file checksum [ 175s] creating rename script [ 175s] RPM file checksum differs. [ 175s] Extracting packages [ 176s] /usr/lib/xmlsec1Conf.sh differs (ASCII text) [ 176s] --- old//usr/lib/xmlsec1Conf.sh 2020-10-27 06:15:14.000000000 +0000 [ 176s] +++ new//usr/lib/xmlsec1Conf.sh 2020-10-27 08:26:01.000000000 +0000 [ 176s] @@ -8,6 +8,6 @@ [ 176s] [ 176s] XMLSEC_LIBDIR="/usr/lib" [ 176s] XMLSEC_INCLUDEDIR=" -D__XMLSEC_FUNCTION__=__func__ -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_GOST2012=1 -DXMLSEC_NO_CRYPTO_DYNAMIC_LOADING=1 -I/usr/include/xmlsec1 -I/usr/include/libxml2 -I/usr/include/libxml2 -I/usr/include -I/usr/include/openssl -DXMLSEC_CRYPTO_OPENSSL=1" [ 176s] -XMLSEC_LIBS="-L/usr/lib -lxmlsec1-openssl -lxmlsec1 -lxml2 -lxslt -lxml2 -Wl,-rpath-link -Wl,/usr/lib -L/usr/lib -lcrypto -ldl" [ 176s] +XMLSEC_LIBS="-L/usr/lib -lxmlsec1-openssl -lxmlsec1 -lxml2 -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -Wl,-rpath-link -Wl,/usr/lib -L/usr/lib -lcrypto -ldl" [ 176s] MODULE_VERSION="xmlsec-1.2.28-openssl" [ 176s] [ 176s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.28-1.2.armv7l.rpm [ 176s] Comparing xmlsec1-devel-static-1.2.28-1.1.armv7l.rpm to xmlsec1-devel-static-1.2.28-1.2.armv7l.rpm [ 176s] This is not a prerelease project. Compare the project name. [ 176s] comparing rpmtags [ 176s] comparing RELEASE [ 176s] comparing PROVIDES [ 176s] comparing scripts [ 176s] comparing filelist [ 176s] comparing file checksum [ 176s] creating rename script [ 176s] RPM file checksum differs. [ 176s] Extracting packages [ 176s] /usr/lib/libxmlsec1_gcrypt_la-app.o differs in ELF section .comment [ 176s] --- /tmp/tmp.faIe115250/tmp.CBOi115440 2020-10-27 08:26:11.750596972 +0000 [ 176s] +++ /tmp/tmp.faIe115250/tmp.Ifvu115447 2020-10-27 08:26:11.754596934 +0000 [ 176s] @@ -4,5 +4,5 @@ [ 176s] Contents of section .comment: [ 176s] 0000 00474343 3a202854 697a656e 2f4c696e .GCC: (Tizen/Lin [ 176s] 0010 61726f20 47434320 362e322e 31203230 aro GCC 6.2.1 20 [ 176s] - 0020 31362e31 3220332e 32292036 2e322e31 16.12 3.2) 6.2.1 [ 176s] + 0020 31362e31 3220322e 34292036 2e322e31 16.12 2.4) 6.2.1 [ 176s] 0030 20323031 36313231 3300 20161213. [ 176s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.28-1.2.armv7l.rpm [ 176s] Comparing xmlsec1-gcrypt-1.2.28-1.1.armv7l.rpm to xmlsec1-gcrypt-1.2.28-1.2.armv7l.rpm [ 176s] This is not a prerelease project. Compare the project name. [ 176s] comparing rpmtags [ 177s] comparing RELEASE [ 177s] comparing PROVIDES [ 177s] comparing scripts [ 177s] comparing filelist [ 177s] comparing file checksum [ 177s] creating rename script [ 177s] RPM file checksum differs. [ 177s] Extracting packages [ 177s] /usr/lib/libxmlsec1-gcrypt.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 177s] Package content is identical [ 177s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.28-1.2.armv7l.rpm [ 177s] skipping -debuginfo package [ 177s] compare /.build.oldpackages/xmlsec1-openssl-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.28-1.2.armv7l.rpm [ 177s] Comparing xmlsec1-openssl-1.2.28-1.1.armv7l.rpm to xmlsec1-openssl-1.2.28-1.2.armv7l.rpm [ 178s] This is not a prerelease project. Compare the project name. [ 178s] comparing rpmtags [ 178s] comparing RELEASE [ 178s] comparing PROVIDES [ 178s] comparing scripts [ 178s] comparing filelist [ 178s] comparing file checksum [ 178s] creating rename script [ 178s] RPM file checksum differs. [ 178s] Extracting packages [ 179s] /usr/lib/libxmlsec1-openssl.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 179s] Package content is identical [ 179s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.28-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.28-1.2.armv7l.rpm [ 179s] skipping -debuginfo package [ 179s] [ 179s] obsnw02 finished "build xmlsec1.spec" at Tue Oct 27 08:26:14 UTC 2020. [ 179s]