[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw26 started "build _service:gbs:kbd.spec" at Thu Oct 31 03:30:57 UTC 2019. [ 0s] [ 0s] Building kbd for project 'Tizen:5.5:Unified' repository 'standard' arch 'aarch64' srcmd5 '78bbdbbe523259d214e12033a1e32449' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling libgcc... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/102] installing libmagic-data-5.37-1.40 [ 9s] [2/102] installing setup-0.9-1.2 [ 9s] [3/102] installing filesystem-3.1-1.1 [ 9s] [4/102] installing glibc-2.24-1.19 [ 9s] [5/102] installing bash-3.2.57-1.1 [ 9s] [6/102] installing binutils-2.27-1.24 [ 10s] [7/102] installing cpio-2.11-1.1 [ 10s] [8/102] installing diffutils-3.3-1.1 [ 10s] [9/102] installing fdupes-1.40-1.70 [ 10s] [10/102] installing findutils-4.3.8-1.64 [ 10s] [11/102] installing gdbm-1.8.3-1.68 [ 10s] [12/102] installing hostname-3.20-1.1 [ 10s] [13/102] installing libatomic-6.2.1-1.2 [ 11s] [14/102] installing libattr-2.4.47-1.70 [ 11s] [15/102] installing libbz2-1.0.6-1.59 [ 11s] [16/102] installing libcap-2.24-1.69 [ 12s] [17/102] installing libelf-0.153-1.6 [ 12s] [18/102] installing libext2fs-1.43.4-1.1 [ 12s] [19/102] installing libfreebl3-3.34.1-1.37 [ 13s] [20/102] installing libgcc-6.2.1-1.2 [ 13s] [21/102] installing libgomp-6.2.1-1.2 [ 13s] [22/102] installing libitm-6.2.1-1.2 [ 14s] [23/102] installing libltdl-2.4.2-1.51 [ 14s] [24/102] installing liblua-5.1.5-1.2 [ 14s] [25/102] installing liblzma-5.2.4-1.47 [ 15s] [26/102] installing libpcre-8.43-1.3 [ 15s] [27/102] installing libpopt-1.16-1.3 [ 15s] [28/102] installing libsmack-1.3.1-1.2 [ 15s] [29/102] installing libsmartcols-2.30-1.1 [ 16s] [30/102] installing libsqlite-3.29.0-1.23 [ 16s] [31/102] installing libuuid-2.30-1.1 [ 16s] [32/102] installing m4-1.4.17-1.1 [ 17s] [33/102] installing net-tools-2.0_20121208git-1.1 [ 17s] [34/102] installing nspr-4.12-1.2 [ 17s] [35/102] installing patch-2.7-1.3 [ 17s] [36/102] installing pkg-config-0.28-1.62 [ 17s] [37/102] installing sed-4.1c-1.1 [ 17s] [38/102] installing update-alternatives-1.18.15-1.1 [ 17s] [39/102] installing which-2.20-1.1 [ 17s] [40/102] installing zlib-1.2.11-1.67 [ 17s] [41/102] installing build-compare-2015.04.28-1.12 [ 17s] [42/102] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 19s] [43/102] installing terminfo-base-full-6.1-1.36 [ 19s] [44/102] installing check-0.12.0-1.1 [ 19s] [45/102] installing coreutils-6.9-1.4 [ 20s] [46/102] installing cpp-6.2.1-1.2 [ 20s] [47/102] installing flex-2.6.4-1.5 [ 20s] [48/102] installing gawk-3.1.5-1.1 [ 20s] [49/102] installing gcc-c++-6.2.1-1.2 [ 21s] [50/102] installing grep-2.5.2-1.1 [ 21s] [51/102] installing libacl-2.2.52-1.70 [ 21s] [52/102] installing libasm-0.153-1.6 [ 21s] [53/102] installing libblkid-2.30-1.1 [ 22s] [54/102] installing libstdc++-6.2.1-1.2 [ 22s] [55/102] installing make-4.0-1.5 [ 22s] [56/102] installing nss-certs-3.34.1-1.37 [ 22s] [57/102] installing smack-1.3.1-1.2 [ 22s] [58/102] installing bison-3.0.5-1.9 [ 22s] [59/102] installing bzip2-1.0.6-1.59 [ 22s] [60/102] installing libgfortran-6.2.1-1.2 [ 23s] [61/102] installing libmagic-5.37-1.40 [ 23s] [62/102] installing libxml2-2.9.7-1.19 [ 23s] [63/102] installing xz-5.2.4-1.47 [ 23s] [64/102] installing libdw-0.153-1.6 [ 24s] [65/102] installing libstdc++-devel-6.2.1-1.2 [ 24s] [66/102] installing file-5.37-1.40 [ 24s] [67/102] installing libmount-2.30-1.1 [ 24s] [68/102] installing linux-glibc-devel-3.10-1.69 [ 25s] [69/102] installing tar-1.17-1.1 [ 25s] [70/102] installing db4-4.8.30.NC-1.61 [ 25s] [71/102] installing gettext-runtime-0.19.8.1-1.9 [ 26s] [72/102] installing glibc-locale-2.24-1.19 [ 26s] [73/102] installing gzip-1.3.12-1.71 [ 26s] [74/102] installing libcc1-6.2.1-1.2 [ 27s] [75/102] installing libfdisk-2.30-1.1 [ 27s] [76/102] installing libubsan-6.2.1-1.2 [ 27s] [77/102] installing pam-1.1.6-1.1 [ 28s] [78/102] installing libncurses6-6.1-1.36 [ 28s] [79/102] installing tzdata-2019a-1.1 [ 28s] [80/102] installing elfutils-0.153-1.6 [ 28s] [81/102] installing libncurses-6.1-1.36 [ 28s] [82/102] installing glibc-devel-2.24-1.19 [ 29s] [83/102] installing less-466-1.1 [ 29s] [84/102] installing libreadline-5.2-1.20 [ 29s] [85/102] installing pam-devel-1.1.6-1.1 [ 29s] [86/102] installing procps-ng-3.3.15-1.1 [ 29s] [87/102] installing gettext-tools-0.19.8.1-1.9 [ 30s] [88/102] installing perl-5.30.0-1.7 [ 32s] [89/102] installing gcc-6.2.1-1.2 [ 33s] [90/102] installing build-mkbaselibs-20120927-1.1 [ 33s] [91/102] installing qemu-accel-x86_64-aarch64-0.4-1.2 [ 39s] [92/102] installing autoconf-2.69-1.19 [ 39s] [93/102] installing check-devel-0.12.0-1.1 [ 39s] [94/102] installing util-linux-2.30-1.1 [ 39s] [95/102] installing automake-1.15.1-1.42 [ 40s] [96/102] installing util-linux-su-2.30-1.1 [ 40s] [97/102] installing build-20120927-1.1 [ 40s] [98/102] installing libtool-2.4.2-1.51 [ 40s] [99/102] installing nss-3.34.1-1.37 [ 40s] [100/102] installing libsoftokn3-3.34.1-1.37 [ 40s] [101/102] installing rpm-4.11.0.1-1.27 [ 41s] [102/102] installing rpm-build-4.11.0.1-1.27 [ 41s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 41s] now finalizing build dir... [ 41s] Running build time source services... [ 42s] build target is aarch64-tizen-linux [ 42s] ----------------------------------------------------------------- [ 42s] I have the following modifications for kbd.spec: [ 42s] 8c8 [ 42s] < Release: 0 [ 42s] --- [ 42s] > Release: 1.1 [ 42s] 27c27 [ 42s] < BuildRequires: gettext [ 42s] --- [ 42s] > BuildRequires: gettext-tools [ 42s] 126a127 [ 42s] > %changelog [ 42s] ----------------------------------------------------------------- [ 42s] ----- building kbd.spec (user abuild) [ 42s] ----------------------------------------------------------------- [ 42s] ----------------------------------------------------------------- [ 42s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified/standard/78bbdbbe523259d214e12033a1e32449-kbd' -ba /home/abuild/rpmbuild/SOURCES/kbd.spec [ 42s] Building target platforms: aarch64-tizen-linux [ 42s] Building for target aarch64-tizen-linux [ 42s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.VYNU4n [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + rm -rf kbd-2.0.4 [ 42s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-2.0.4.tar.bz2 [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + cd kbd-2.0.4 [ 42s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latsun-fonts.tar.bz2 [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latarcyrheb-16-fixed.tar.bz2 [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/fr-dvorak.tar.bz2 [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latarcyrheb-32.tar.bz2 [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 42s] + echo 'Patch #0 (67c099c-to-d2a066e.diff):' [ 42s] Patch #0 (67c099c-to-d2a066e.diff): [ 42s] + /bin/cat /home/abuild/rpmbuild/SOURCES/67c099c-to-d2a066e.diff [ 42s] + /bin/patch -p1 --fuzz=2 [ 42s] patching file docs/man/man1/dumpkeys.1.in [ 42s] patching file docs/man/man1/showkey.1 [ 42s] patching file docs/man/man8/setkeycodes.8 [ 42s] patching file po/es.po [ 42s] patching file src/unicode_start [ 42s] + echo 'Patch #1 (0002-Bump-to-kbd-2.0.4.patch):' [ 42s] Patch #1 (0002-Bump-to-kbd-2.0.4.patch): [ 42s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Bump-to-kbd-2.0.4.patch [ 42s] + /bin/patch -p1 --fuzz=2 [ 42s] patching file docs/man/man1/dumpkeys.1.in [ 42s] patching file docs/man/man1/showkey.1 [ 42s] patching file docs/man/man8/setkeycodes.8 [ 42s] patching file po/es.po [ 42s] patching file src/unicode_start [ 42s] + cp /home/abuild/rpmbuild/SOURCES/kbd.manifest . [ 42s] + pushd data/keymaps/i386 [ 42s] ~/rpmbuild/BUILD/kbd-2.0.4/data/keymaps/i386 ~/rpmbuild/BUILD/kbd-2.0.4 [ 42s] + mv qwerty/fi.map qwerty/fi-old.map [ 42s] + cp qwerty/pt-latin9.map qwerty/pt.map [ 42s] + cp qwerty/sv-latin1.map qwerty/se-latin1.map [ 42s] + mv azerty/fr.map azerty/fr-old.map [ 42s] + cp azerty/fr-latin9.map azerty/fr.map [ 42s] + cp azerty/fr-latin9.map azerty/fr-latin0.map [ 42s] + mv dvorak/no.map dvorak/no-dvorak.map [ 42s] + mv fgGIod/trf.map fgGIod/trf-fgGIod.map [ 42s] + mv olpc/es.map olpc/es-olpc.map [ 42s] + mv olpc/pt.map olpc/pt-olpc.map [ 42s] + mv qwerty/cz.map qwerty/cz-qwerty.map [ 42s] + popd [ 42s] ~/rpmbuild/BUILD/kbd-2.0.4 [ 42s] + pushd po [ 42s] ~/rpmbuild/BUILD/kbd-2.0.4/po ~/rpmbuild/BUILD/kbd-2.0.4 [ 42s] + rm -f gr.po gr.gmo [ 42s] + popd [ 42s] ~/rpmbuild/BUILD/kbd-2.0.4 [ 42s] + exit 0 [ 42s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.LK0Fyl [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd kbd-2.0.4 [ 42s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 42s] + ref=/usr/lib/rpm [ 42s] + for s in guess sub [ 42s] ++ find -maxdepth 8 -name config.guess [ 42s] + for s in guess sub [ 42s] ++ find -maxdepth 8 -name config.sub [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 42s] + export CFLAGS [ 42s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 42s] + export CXXFLAGS [ 42s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 42s] + export FFLAGS [ 42s] + LDFLAGS= [ 42s] + export LDFLAGS [ 42s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 42s] + export CFLAGS [ 42s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 42s] + export CXXFLAGS [ 42s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 42s] + export FFLAGS [ 42s] + autoreconf -v --install --force [ 45s] autoreconf: Entering directory `.' [ 45s] autoreconf: running: autopoint --force [ 50s] Copying file config/mkinstalldirs [ 50s] Copying file po/Makefile.in.in [ 50s] Copying file po/Makevars.template [ 50s] Copying file po/Rules-quot [ 50s] Copying file po/boldquot.sed [ 50s] Copying file po/en@boldquot.header [ 50s] Copying file po/en@quot.header [ 50s] Copying file po/insert-header.sin [ 50s] Copying file po/quot.sed [ 50s] Copying file po/remove-potcdate.sin [ 51s] autoreconf: running: aclocal --force -I m4 [ 63s] autoreconf: configure.ac: tracing [ 64s] autoreconf: running: libtoolize --copy --force [ 64s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. [ 64s] libtoolize: copying file `config/ltmain.sh' [ 64s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 64s] libtoolize: copying file `m4/libtool.m4' [ 64s] libtoolize: copying file `m4/ltoptions.m4' [ 65s] libtoolize: copying file `m4/ltsugar.m4' [ 65s] libtoolize: copying file `m4/ltversion.m4' [ 65s] libtoolize: copying file `m4/lt~obsolete.m4' [ 77s] autoreconf: running: /usr/bin/autoconf --force [ 81s] autoreconf: running: /usr/bin/autoheader --force [ 83s] autoreconf: running: automake --add-missing --copy --force-missing [ 85s] configure.ac:44: installing 'config/ar-lib' [ 85s] configure.ac:41: installing 'config/config.guess' [ 85s] configure.ac:41: installing 'config/config.sub' [ 85s] configure.ac:10: installing 'config/install-sh' [ 85s] configure.ac:10: installing 'config/missing' [ 89s] src/Makefile.am: installing 'config/depcomp' [ 90s] src/vlock/Makefile.am:9: warning: source file '../kbd_error.c' is in a subdirectory, [ 90s] src/vlock/Makefile.am:9: but option 'subdir-objects' is disabled [ 90s] automake: warning: possible forward-incompatibility. [ 90s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 90s] automake: automake option hasn't been enabled. For now, the corresponding output [ 90s] automake: object file(s) will be placed in the top-level directory. However, [ 90s] automake: this behaviour will change in future Automake versions: they will [ 90s] automake: unconditionally cause object files to be placed in the same subdirectory [ 90s] automake: of the corresponding sources. [ 90s] automake: You are advised to start using 'subdir-objects' option throughout your [ 90s] automake: project, to avoid future incompatibilities. [ 91s] parallel-tests: installing 'config/test-driver' [ 91s] autoreconf: Leaving directory `.' [ 91s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --datadir=/usr/lib/kbd --mandir=/usr/share/man --localedir=/usr/share/locale --disable-nls [ 91s] checking for a BSD-compatible install... /bin/install -c [ 91s] checking whether build environment is sane... yes [ 91s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 91s] checking for gawk... gawk [ 91s] checking whether make sets $(MAKE)... yes [ 91s] checking whether make supports nested variables... yes [ 91s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 91s] checking pkg-config is at least version 0.9.0... yes [ 91s] checking for CHECK... yes [ 91s] checking whether make supports nested variables... (cached) yes [ 91s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 92s] checking whether the C compiler works... yes [ 92s] checking for C compiler default output file name... a.out [ 92s] checking for suffix of executables... [ 92s] checking whether we are cross compiling... no [ 92s] checking for suffix of object files... o [ 92s] checking whether we are using the GNU C compiler... yes [ 92s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 92s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 92s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 92s] checking for style of include used by make... GNU [ 92s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 92s] checking for bison... bison -y [ 92s] checking for flex... flex [ 92s] checking lex output file root... lex.yy [ 92s] checking lex library... -lfl [ 93s] checking whether yytext is a pointer... yes [ 93s] checking for a sed that does not truncate output... /bin/sed [ 93s] checking whether ln -s works... yes [ 93s] checking whether make sets $(MAKE)... (cached) yes [ 93s] checking build system type... aarch64-tizen-linux-gnu [ 93s] checking host system type... aarch64-tizen-linux-gnu [ 93s] checking for aarch64-tizen-linux-gnu-ar... no [ 93s] checking for aarch64-tizen-linux-gnu-lib... no [ 93s] checking for aarch64-tizen-linux-gnu-link... no [ 93s] checking for ar... ar [ 93s] checking the archiver (ar) interface... ar [ 93s] checking how to print strings... printf [ 93s] checking for a sed that does not truncate output... (cached) /bin/sed [ 93s] checking for grep that handles long lines and -e... /bin/grep [ 93s] checking for egrep... /bin/grep -E [ 93s] checking for fgrep... /bin/grep -F [ 93s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 93s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 93s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 93s] checking the name lister (/bin/nm -B) interface... BSD nm [ 93s] checking the maximum length of command line arguments... 1572864 [ 93s] checking whether the shell understands some XSI constructs... yes [ 93s] checking whether the shell understands "+="... yes [ 93s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 93s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 93s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 93s] checking for aarch64-tizen-linux-gnu-objdump... no [ 93s] checking for objdump... objdump [ 93s] checking how to recognize dependent libraries... pass_all [ 93s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 93s] checking for dlltool... no [ 93s] checking how to associate runtime and link libraries... printf %s\n [ 93s] checking for aarch64-tizen-linux-gnu-ar... ar [ 93s] checking for archiver @FILE support... @ [ 93s] checking for aarch64-tizen-linux-gnu-strip... no [ 93s] checking for strip... strip [ 93s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 93s] checking for ranlib... ranlib [ 93s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 93s] checking for sysroot... no [ 93s] checking for aarch64-tizen-linux-gnu-mt... no [ 93s] checking for mt... no [ 93s] checking if : is a manifest tool... no [ 93s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 93s] checking for ANSI C header files... yes [ 93s] checking for sys/types.h... yes [ 93s] checking for sys/stat.h... yes [ 93s] checking for stdlib.h... yes [ 93s] checking for string.h... yes [ 93s] checking for memory.h... yes [ 93s] checking for strings.h... yes [ 93s] checking for inttypes.h... yes [ 93s] checking for stdint.h... yes [ 93s] checking for unistd.h... yes [ 93s] checking for dlfcn.h... yes [ 93s] checking for objdir... .libs [ 94s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 94s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 94s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 94s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 94s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 94s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 94s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 94s] checking whether -lc should be explicitly linked in... no [ 94s] checking dynamic linker characteristics... GNU/Linux ld.so [ 94s] checking how to hardcode library paths into programs... immediate [ 94s] checking whether stripping libraries is possible... yes [ 94s] checking if libtool supports shared libraries... yes [ 94s] checking whether to build shared libraries... yes [ 94s] checking whether to build static libraries... yes [ 94s] checking whether NLS is requested... no [ 94s] checking for msgfmt... /bin/msgfmt [ 94s] checking for gmsgfmt... /bin/msgfmt [ 94s] checking for xgettext... /bin/xgettext [ 94s] checking for msgmerge... /bin/msgmerge [ 94s] checking for ld used by GCC... /usr/aarch64-tizen-linux-gnu/bin/ld [ 94s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 94s] checking for shared library run path origin... done [ 94s] checking whether NLS is requested... no [ 94s] checking whether to use NLS... no [ 94s] checking for dirent.h that defines DIR... yes [ 94s] checking for library containing opendir... none required [ 94s] checking for ANSI C header files... (cached) yes [ 94s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 94s] checking fcntl.h usability... yes [ 94s] checking fcntl.h presence... yes [ 94s] checking for fcntl.h... yes [ 94s] checking libintl.h usability... yes [ 94s] checking libintl.h presence... yes [ 94s] checking for libintl.h... yes [ 94s] checking locale.h usability... yes [ 94s] checking locale.h presence... yes [ 94s] checking for locale.h... yes [ 94s] checking for memory.h... (cached) yes [ 94s] checking for stdlib.h... (cached) yes [ 94s] checking for string.h... (cached) yes [ 94s] checking sys/file.h usability... yes [ 94s] checking sys/file.h presence... yes [ 94s] checking for sys/file.h... yes [ 94s] checking sys/ioctl.h usability... yes [ 94s] checking sys/ioctl.h presence... yes [ 94s] checking for sys/ioctl.h... yes [ 94s] checking termios.h usability... yes [ 94s] checking termios.h presence... yes [ 94s] checking for termios.h... yes [ 94s] checking for unistd.h... (cached) yes [ 94s] checking for an ANSI C-conforming const... yes [ 94s] checking for inline... inline [ 94s] checking for size_t... yes [ 94s] checking whether struct tm is in sys/time.h or time.h... time.h [ 94s] checking for uid_t in sys/types.h... yes [ 94s] checking for unistd.h... (cached) yes [ 94s] checking for working chown... yes [ 95s] checking whether closedir returns void... no [ 95s] checking for pid_t... yes [ 95s] checking vfork.h usability... no [ 95s] checking vfork.h presence... no [ 95s] checking for vfork.h... no [ 95s] checking for fork... yes [ 95s] checking for vfork... yes [ 95s] checking for working fork... yes [ 95s] checking for working vfork... (cached) yes [ 95s] checking whether aarch64-tizen-linux-gnu-gcc needs -traditional... no [ 95s] checking return type of signal handlers... void [ 95s] checking whether lstat correctly handles trailing slash... yes [ 95s] checking whether stat accepts an empty string... no [ 95s] checking for alarm... yes [ 95s] checking for memset... yes [ 95s] checking for setlocale... yes [ 95s] checking for strcasecmp... yes [ 95s] checking for strchr... yes [ 95s] checking for strdup... yes [ 95s] checking for strerror... yes [ 95s] checking for strspn... yes [ 95s] checking for strstr... yes [ 95s] checking for strtol... yes [ 95s] checking for strtoul... yes [ 95s] checking for setpgrp... yes [ 96s] checking for malloc... yes [ 96s] checking for realloc... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wextra flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdisabled-optimization flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wcast-align flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes flag... yes [ 96s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations flag... yes [ 96s] checking for pam_start in -lpam... yes [ 96s] checking security/pam_appl.h usability... yes [ 96s] checking security/pam_appl.h presence... yes [ 96s] checking for security/pam_appl.h... yes [ 96s] checking for misc_conv in -lpam_misc... yes [ 96s] checking security/pam_misc.h usability... yes [ 96s] checking security/pam_misc.h presence... yes [ 96s] checking for security/pam_misc.h... yes [ 96s] checking for doxygen... no [ 96s] checking that generated files are newer than configure... done [ 96s] configure: creating ./config.status [ 96s] config.status: creating Makefile [ 97s] config.status: creating data/Makefile [ 97s] config.status: creating docs/Makefile [ 97s] config.status: creating docs/man/Makefile [ 97s] config.status: creating docs/man/man1/Makefile [ 97s] config.status: creating docs/man/man1/dumpkeys.1 [ 97s] config.status: creating docs/man/man1/loadkeys.1 [ 97s] config.status: creating docs/man/man1misc/Makefile [ 97s] config.status: creating docs/man/man5/Makefile [ 97s] config.status: creating docs/man/man8/Makefile [ 97s] config.status: creating docs/man/man8/loadunimap.8 [ 97s] config.status: creating docs/man/man8/mapscrn.8 [ 97s] config.status: creating docs/man/man8/setfont.8 [ 97s] config.status: creating docs/man/man8misc/Makefile [ 97s] config.status: creating docs/reference/Makefile [ 97s] config.status: creating docs/reference/libkeymap/Makefile [ 97s] config.status: creating po/Makefile.in [ 97s] config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting [ 97s] config.status: creating src/Makefile [ 97s] config.status: creating src/libkeymap/Makefile [ 97s] config.status: creating src/vlock/Makefile [ 97s] config.status: creating tests/Makefile [ 97s] config.status: creating config.h [ 97s] config.status: executing depfiles commands [ 99s] config.status: executing libtool commands [ 99s] config.status: executing default-1 commands [ 99s] config.status: creating po/POTFILES [ 99s] config.status: creating po/Makefile [ 99s] [ 99s] kbd 2.0.4 [ 99s] ====== [ 99s] [ 99s] prefix: /usr [ 99s] libdir: /usr/lib64 [ 99s] bindir: /usr/bin [ 99s] datadir: /usr/lib/kbd [ 99s] [ 99s] compiler: aarch64-tizen-linux-gnu-gcc [ 99s] cflags: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Wextra -Wmissing-noreturn -Wdisabled-optimization -Wcast-align -Wshadow -Wmissing-format-attribute -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations [ 99s] [ 99s] {get,set}keycodes: yes [ 99s] resizecons: no [ 99s] optional progs: no [ 99s] vlock: yes [ 99s] libkeymap: no [ 99s] [ 99s] + /bin/make -j8 [ 99s] /bin/make all-recursive [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 99s] Making all in src [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 99s] Making all in vlock [ 99s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 99s] CC kbd_error.o [ 99s] CC auth.o [ 99s] CC pam.o [ 99s] CC parse.o [ 99s] CC screen.o [ 99s] CC username.o [ 99s] CC vlock.o [ 99s] CC vt.o [ 99s] CCLD vlock [ 99s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 99s] Making all in libkeymap [ 99s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 99s] ../../contrib/gen_charset_syms.pl -n latin1_syms -s 160 <../../data/consoletrans/8859-1_to_uni.trans >./syms.latin1.h [ 99s] ../../contrib/gen_charset_syms.pl -n latin2_syms -s 160 <../../data/consoletrans/8859-2_to_uni.trans >./syms.latin2.h [ 99s] ../../contrib/gen_charset_syms.pl -n latin3_syms -s 160 <../../data/consoletrans/8859-3_to_uni.trans >./syms.latin3.h [ 99s] YACC parser.c [ 99s] ../../contrib/gen_charset_syms.pl -n latin4_syms -s 160 <../../data/consoletrans/8859-4_to_uni.trans >./syms.latin4.h [ 99s] LEX analyze.c [ 99s] ../../contrib/gen_charset_syms.pl -n iso8859_5_syms -s 160 <../../data/consoletrans/8859-5_to_uni.trans >./syms.iso8859_5.h [ 99s] ../../contrib/gen_charset_syms.pl -n iso8859_7_syms -s 160 <../../data/consoletrans/8859-7_to_uni.trans >./syms.iso8859_7.h [ 99s] ../../contrib/gen_charset_syms.pl -n iso8859_8_syms -s 160 <../../data/consoletrans/8859-8_to_uni.trans >./syms.iso8859_8.h [ 99s] ../../contrib/gen_charset_syms.pl -n iso8859_9_syms -s 160 <../../data/consoletrans/8859-9_to_uni.trans >./syms.iso8859_9.h [ 99s] ../../contrib/gen_charset_syms.pl -n iso8859_15_syms -s 160 <../../data/consoletrans/8859-15_to_uni.trans >./syms.iso8859_15.h [ 99s] ../../contrib/gen_charset_syms.pl -n cp1250_syms -s 128 <../../data/consoletrans/cp1250_to_uni.trans >./syms.cp1250.h [ 99s] ../../contrib/gen_charset_syms.pl -n koi8_syms -s 128 <../../data/consoletrans/koi8-u_to_uni.trans >./syms.koi8.h [ 99s] updating parser.h [ 99s] /bin/make all-am [ 99s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 99s] CC array.lo [ 99s] CC findfile.lo [ 99s] CC common.lo [ 99s] CC kernel.lo [ 99s] CC dump.lo [ 99s] CC kmap.lo [ 99s] CC func.lo [ 99s] CC diacr.lo [ 99s] common.c: In function 'lk_init': [ 99s] common.c:166:21: warning: argument 2 of 'lk_set_log_fn' might be a candidate for a format attribute [-Wsuggest-attribute=format] [ 99s] lk_set_log_fn(ctx, log_file, stderr); [ 99s] ^~~~~~~~ [ 99s] CC summary.lo [ 100s] CC loadkeys.lo [ 100s] CC parser.lo [ 100s] CC analyze.lo [ 100s] CC modifiers.lo [ 100s] CC ksyms.lo [ 100s] CCLD libkeymap.la [ 100s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 100s] CC getfd.o [ 100s] CC xmalloc.o [ 100s] CC kbd_error.o [ 100s] CC psffontop.o [ 100s] CC utf8.o [ 100s] CC kdmapop.o [ 100s] CC loadunimap.o [ 100s] CC kdfontop.o [ 101s] CC mapscrn-mapscrn.o [ 101s] CC loadunimap-loadunimap.o [ 101s] CC dumpkeys.o [ 101s] CC loadkeys.o [ 101s] CC showkey.o [ 101s] CC setfont.o [ 101s] CC mapscrn.o [ 101s] CC showconsolefont.o [ 101s] CC setleds.o [ 101s] CC setmetamode.o [ 101s] CC kbd_mode.o [ 101s] CC psfxtable.o [ 101s] CC fgconsole.o [ 101s] CC kbdrate.o [ 101s] CC chvt.o [ 101s] CC deallocvt.o [ 101s] CC openvt.o [ 101s] CC kbdinfo.o [ 101s] CC setvtrgb.o [ 101s] CC getkeycodes.o [ 101s] openvt.c: In function 'main': [ 101s] openvt.c:213:5: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 101s] (void)setuid(getuid()); [ 101s] ^~~~~~~~~~~~~~~~~~~~~~ [ 101s] openvt.c:355:4: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 101s] setuid(uid); [ 101s] ^~~~~~~~~~~ [ 101s] CC setkeycodes.o [ 101s] AR libcommon.a [ 101s] AR libfont.a [ 101s] CCLD mapscrn [ 101s] CCLD loadunimap [ 101s] CCLD dumpkeys [ 101s] CCLD loadkeys [ 101s] CCLD showkey [ 101s] CCLD setfont [ 101s] CCLD showconsolefont [ 101s] CCLD setleds [ 101s] CCLD setmetamode [ 101s] CCLD kbd_mode [ 101s] CCLD psfxtable [ 101s] CCLD fgconsole [ 101s] CCLD kbdrate [ 101s] CCLD chvt [ 101s] CCLD deallocvt [ 101s] CCLD openvt [ 101s] CCLD kbdinfo [ 101s] CCLD setvtrgb [ 101s] CCLD getkeycodes [ 101s] CCLD setkeycodes [ 101s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 101s] Making all in data [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 101s] make[2]: Nothing to be done for 'all'. [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 101s] Making all in po [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 101s] make[2]: Nothing to be done for 'all'. [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 101s] Making all in docs [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 101s] Making all in man [ 101s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 101s] Making all in man1 [ 101s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 101s] make[4]: Nothing to be done for 'all'. [ 101s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 101s] Making all in man5 [ 101s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 101s] make[4]: Nothing to be done for 'all'. [ 101s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 101s] Making all in man8 [ 101s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 101s] make[4]: Nothing to be done for 'all'. [ 101s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 101s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 101s] make[4]: Nothing to be done for 'all-am'. [ 101s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 101s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 101s] Making all in reference [ 101s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 101s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 101s] make[4]: Nothing to be done for 'all-am'. [ 101s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 101s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 101s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 101s] make[3]: Nothing to be done for 'all-am'. [ 101s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 101s] Making all in tests [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 101s] CC libkeymap-dumpkeys.o [ 101s] CC libkeymap-mktable.o [ 101s] CC libkeymap-bkeymap.o [ 101s] CC libkeymap-showmaps.o [ 101s] CC libkeymap-init.o [ 101s] CC libkeymap-kmap.o [ 101s] CC libkeymap-keys.o [ 101s] CC libkeymap-parse.o [ 101s] libkeymap-bkeymap.c: In function 'main': [ 101s] libkeymap-bkeymap.c:6:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 101s] int main(int argc, char **argv) [ 101s] ^~~~ [ 101s] libkeymap-showmaps.c: In function 'main': [ 101s] libkeymap-showmaps.c:22:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] [ 101s] for (i = 0; i < ctx->keymap->total; i++) { [ 101s] ^ [ 101s] libkeymap-showmaps.c:8:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 101s] int main(int argc, char **argv) [ 101s] ^~~~ [ 101s] libkeymap-mktable.c: In function 'main': [ 101s] libkeymap-mktable.c:6:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 101s] int main(int argc, char **argv) [ 101s] ^~~~ [ 101s] CC libkeymap-charset.o [ 101s] CCLD libkeymap-bkeymap [ 101s] CCLD libkeymap-showmaps [ 101s] CCLD libkeymap-dumpkeys [ 101s] libkeymap-charset.c: In function 'test0': [ 101s] libkeymap-charset.c:21:4: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 101s] s = lk_get_charset(ctx); [ 101s] ^ [ 101s] libkeymap-charset.c: In function 'test1': [ 101s] libkeymap-charset.c:44:4: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 101s] s = lk_get_charset(ctx); [ 101s] ^ [ 101s] CCLD libkeymap-mktable [ 101s] CCLD libkeymap-init [ 101s] CCLD libkeymap-kmap [ 101s] CCLD libkeymap-charset [ 101s] CCLD libkeymap-keys [ 101s] CCLD libkeymap-parse [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 101s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 101s] + exit 0 [ 101s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.YojF0H [ 101s] + umask 022 [ 101s] + cd /home/abuild/rpmbuild/BUILD [ 101s] + cd kbd-2.0.4 [ 101s] + LANG=C [ 101s] + export LANG [ 101s] + unset DISPLAY [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 [ 101s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 [ 101s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 install [ 101s] Making install in src [ 101s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 101s] Making install in vlock [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 101s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 101s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin' [ 101s] /bin/sh ../../libtool --mode=install /bin/install -c vlock '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin' [ 101s] libtool: install: /bin/install -c vlock /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/vlock [ 101s] make[3]: Nothing to be done for 'install-data-am'. [ 101s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 101s] Making install in libkeymap [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 102s] /bin/make install-am [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 102s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 102s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin' [ 102s] /bin/sh ../libtool --mode=install /bin/install -c mapscrn loadunimap dumpkeys loadkeys showkey setfont showconsolefont setleds setmetamode kbd_mode psfxtable fgconsole kbdrate chvt deallocvt openvt kbdinfo setvtrgb getkeycodes setkeycodes '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin' [ 102s] libtool: install: /bin/install -c mapscrn /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/mapscrn [ 102s] libtool: install: /bin/install -c loadunimap /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/loadunimap [ 102s] libtool: install: /bin/install -c dumpkeys /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/dumpkeys [ 102s] libtool: install: /bin/install -c loadkeys /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/loadkeys [ 102s] libtool: install: /bin/install -c showkey /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/showkey [ 102s] libtool: install: /bin/install -c setfont /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setfont [ 102s] libtool: install: /bin/install -c showconsolefont /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/showconsolefont [ 102s] libtool: install: /bin/install -c setleds /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setleds [ 102s] libtool: install: /bin/install -c setmetamode /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setmetamode [ 102s] libtool: install: /bin/install -c kbd_mode /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/kbd_mode [ 102s] libtool: install: /bin/install -c psfxtable /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/psfxtable [ 102s] libtool: install: /bin/install -c fgconsole /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/fgconsole [ 102s] libtool: install: /bin/install -c kbdrate /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/kbdrate [ 102s] libtool: install: /bin/install -c chvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/chvt [ 102s] libtool: install: /bin/install -c deallocvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/deallocvt [ 102s] libtool: install: /bin/install -c openvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/openvt [ 102s] libtool: install: /bin/install -c kbdinfo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/kbdinfo [ 102s] libtool: install: /bin/install -c setvtrgb /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setvtrgb [ 102s] libtool: install: /bin/install -c getkeycodes /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/getkeycodes [ 102s] libtool: install: /bin/install -c setkeycodes /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setkeycodes [ 102s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin' [ 102s] /bin/install -c unicode_start unicode_stop '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin' [ 102s] /bin/make install-exec-hook [ 102s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] for i in psfaddtable psfgettable psfstriptable; do \ [ 102s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/$i; \ [ 102s] ln -s psfxtable /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/$i || exit $?; \ [ 102s] done [ 102s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] make[3]: Nothing to be done for 'install-data-am'. [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 102s] Making install in data [ 102s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 102s] make[2]: Nothing to be done for 'install-exec-am'. [ 102s] /bin/make install-data-hook [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 102s] cp -r ./keymaps keymaps_Z [ 102s] chmod -R u+w keymaps_Z [ 102s] cd keymaps_Z && gzip -f -n -9 */*.map */*/*.map [ 102s] cp -r ./consolefonts consolefonts_Z [ 102s] cp -r ./partialfonts partialfonts_Z [ 102s] chmod -R u+w consolefonts_Z partialfonts_Z [ 102s] cd consolefonts_Z && gzip -f -n -9 * && gunzip ERRORS* README* [ 103s] cd partialfonts_Z && gzip -f -n -9 * [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts [ 103s] install -m 644 consolefonts_Z/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/partialfonts [ 103s] install -m 644 partialfonts_Z/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/partialfonts [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consoletrans [ 103s] install -m 644 ./consoletrans/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consoletrans [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/unimaps [ 103s] install -m 644 ./unimaps/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/unimaps [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386 [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/mac [ 103s] for i in include sun amiga atari i386/azerty i386/bepo i386/dvorak i386/fgGIod i386/qwerty i386/qwertz i386/include i386/olpc i386/colemak i386/carpalx mac/include mac/all; do \ [ 103s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/$i ;\ [ 103s] install -m 644 keymaps_Z/$i/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/$i ;\ [ 103s] done [ 103s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/ppc; ln -s mac /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/ppc [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 103s] Making install in po [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 103s] if test "kbd" = "gettext-tools"; then \ [ 103s] /bin/sh ../config/mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/gettext/po; \ [ 103s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 103s] /bin/install -c -m 644 ./$file \ [ 103s] /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/gettext/po/$file; \ [ 103s] done; \ [ 103s] for file in Makevars; do \ [ 103s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/gettext/po/$file; \ [ 103s] done; \ [ 103s] else \ [ 103s] : ; \ [ 103s] fi [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 103s] Making install in docs [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 103s] Making install in man [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 103s] Making install in man1 [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 103s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 103s] make[4]: Nothing to be done for 'install-exec-am'. [ 103s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man1' [ 103s] /bin/install -c -m 644 chvt.1 deallocvt.1 fgconsole.1 kbd_mode.1 openvt.1 psfaddtable.1 psfgettable.1 psfstriptable.1 psfxtable.1 setleds.1 setmetamode.1 showkey.1 unicode_start.1 unicode_stop.1 dumpkeys.1 loadkeys.1 vlock.1 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man1' [ 103s] /bin/make install-data-hook [ 103s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 103s] cd /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man1 && \ [ 103s] for f in dumpkeys.1 loadkeys.1; do \ [ 103s] /bin/sed -e "s#@DATADIR\@#/usr/lib/kbd#g" "$f" > "$f.new"; \ [ 103s] mv -f -- "$f.new" "$f"; \ [ 103s] done [ 103s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 103s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 103s] Making install in man5 [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 103s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 103s] make[4]: Nothing to be done for 'install-exec-am'. [ 103s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man5' [ 103s] /bin/install -c -m 644 keymaps.5 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man5' [ 103s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 103s] Making install in man8 [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 103s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 103s] make[4]: Nothing to be done for 'install-exec-am'. [ 103s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man8' [ 103s] /bin/install -c -m 644 getkeycodes.8 kbdrate.8 resizecons.8 setkeycodes.8 showconsolefont.8 setvtrgb.8 loadunimap.8 mapscrn.8 setfont.8 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man8' [ 103s] /bin/make install-data-hook [ 103s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 103s] cd /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/man/man8 && \ [ 103s] for f in loadunimap.8 mapscrn.8 setfont.8; do \ [ 103s] /bin/sed -e "s#@DATADIR\@#/usr/lib/kbd#g" "$f" > "$f.new"; \ [ 103s] mv -f -- "$f.new" "$f"; \ [ 103s] done [ 103s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 103s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 103s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 103s] make[4]: Nothing to be done for 'install-exec-am'. [ 103s] make[4]: Nothing to be done for 'install-data-am'. [ 103s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 103s] Making install in reference [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 103s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 103s] make[4]: Nothing to be done for 'install-exec-am'. [ 103s] make[4]: Nothing to be done for 'install-data-am'. [ 103s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 103s] make[3]: Nothing to be done for 'install-exec-am'. [ 103s] make[3]: Nothing to be done for 'install-data-am'. [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 103s] Making install in tests [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 103s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/info/dir [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 -regex '.*\.la$' [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 -regex '.*\.a$' [ 103s] + xargs rm -f -- [ 103s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64//usr/lib/kbd/keymaps/i386/qwerty/ro_win.map.gz [ 103s] + ln -sf sr-cy.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64//usr/lib/kbd/keymaps/i386/qwerty/sr-latin.map.gz [ 103s] + ln -sf us.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64//usr/lib/kbd/keymaps/i386/qwerty/ko.map.gz [ 104s] + sed -i -e 's,\,/usr/bin/kbd_mode,g;s,\,/usr/bin/setfont,g' /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64//usr/bin/unicode_start [ 104s] + ln -sf openvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/open [ 104s] + _target= [ 104s] + _symlinks=0 [ 104s] + _files=() [ 104s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z [ 104s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 104s] ++ sort [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 104s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 104s] ++ seq 1 1 [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 104s] + _files=() [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z [ 104s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 104s] ++ sort [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 104s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 104s] ++ seq 1 2 [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 104s] + _files=() [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z [ 104s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ sort [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 104s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 104s] ++ seq 1 1 [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 104s] + _files=() [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z [ 104s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 104s] ++ sort [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 104s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 104s] ++ seq 1 1 [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 104s] + _files=() [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z [ 104s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 104s] ++ sort [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 104s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 104s] ++ seq 1 1 [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 104s] + _files=() [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 104s] + _files+=($_file) [ 104s] + read _file [ 104s] + test -z [ 104s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 104s] ++ sort [ 104s] ++ for i in '${_files[*]}' [ 104s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 104s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 104s] ++ seq 1 1 [ 104s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 104s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 104s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 104s] + test 0 = 1 [ 104s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 104s] + _files=() [ 104s] + read _file [ 104s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/kbd-2.0.4 [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/chvt [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/deallocvt [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/dumpkeys [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/fgconsole [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/getkeycodes [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/kbd_mode [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/kbdinfo [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/kbdrate [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/loadkeys [ 106s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/loadunimap [ 106s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/mapscrn [ 106s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/openvt [ 106s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/psfxtable [ 106s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setfont [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setkeycodes [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setleds [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setmetamode [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/setvtrgb [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/showconsolefont [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/showkey [ 108s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/bin/vlock [ 108s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 108s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 108s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 108s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 108s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 108s] 975 blocks [ 108s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/kbd-2.0.4/kbd-debuginfo.manifest [ 108s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/kbd-2.0.4/kbd-debugsource.manifest [ 108s] + /usr/lib/rpm/check-buildroot [ 108s] + /usr/lib/rpm//brp-compress [ 108s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 110s] + /usr/lib/rpm/brp-python-hardlink [ 110s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 [ 110s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.94f9rp [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd kbd-2.0.4 [ 110s] + /bin/make check [ 110s] Making check in src [ 110s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 110s] Making check in vlock [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 110s] make[2]: Nothing to be done for 'check'. [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/vlock' [ 110s] Making check in libkeymap [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 110s] /bin/make check-am [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 110s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src/libkeymap' [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 110s] make[2]: Nothing to be done for 'check-am'. [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 110s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/src' [ 110s] Making check in data [ 110s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 110s] make[1]: Nothing to be done for 'check'. [ 110s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/data' [ 110s] Making check in po [ 110s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 110s] make[1]: Nothing to be done for 'check'. [ 110s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/po' [ 110s] Making check in docs [ 110s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 110s] Making check in man [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 110s] Making check in man1 [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 110s] make[3]: Nothing to be done for 'check'. [ 110s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man1' [ 110s] Making check in man5 [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 110s] make[3]: Nothing to be done for 'check'. [ 110s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man5' [ 110s] Making check in man8 [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 110s] make[3]: Nothing to be done for 'check'. [ 110s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man/man8' [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 110s] make[3]: Nothing to be done for 'check-am'. [ 110s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/man' [ 110s] Making check in reference [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 110s] make[3]: Nothing to be done for 'check-am'. [ 110s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs/reference' [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 110s] make[2]: Nothing to be done for 'check-am'. [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 110s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/docs' [ 110s] Making check in tests [ 110s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 110s] /bin/make libkeymap-init libkeymap-kmap libkeymap-keys libkeymap-parse libkeymap-charset dumpkeys-fulltable alt-is-meta [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 110s] make[2]: 'libkeymap-init' is up to date. [ 110s] make[2]: 'libkeymap-kmap' is up to date. [ 110s] make[2]: 'libkeymap-keys' is up to date. [ 110s] make[2]: 'libkeymap-parse' is up to date. [ 110s] make[2]: 'libkeymap-charset' is up to date. [ 110s] sed \ [ 110s] -e 's,2.0.4,2.0.4,g' \ [ 110s] -e 's,@DATADIR@,.,g' \ [ 110s] -e 's,@BUILDDIR@,.,g' \ [ 110s] ./dumpkeys-fulltable [ 110s] touch -r dumpkeys-fulltable.in ./dumpkeys-fulltable [ 110s] chmod 755 ./dumpkeys-fulltable [ 110s] sed \ [ 110s] -e 's,2.0.4,2.0.4,g' \ [ 110s] -e 's,@DATADIR@,.,g' \ [ 110s] -e 's,@BUILDDIR@,.,g' \ [ 110s] ./alt-is-meta [ 110s] touch -r alt-is-meta.in ./alt-is-meta [ 110s] chmod 755 ./alt-is-meta [ 110s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 110s] /bin/make check-TESTS [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 110s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 110s] PASS: libkeymap-init [ 110s] PASS: libkeymap-kmap [ 110s] PASS: libkeymap-keys [ 110s] PASS: libkeymap-parse [ 110s] PASS: libkeymap-charset [ 117s] PASS: dumpkeys-fulltable [ 117s] PASS: alt-is-meta [ 118s] ============================================================================ [ 118s] Testsuite summary for kbd 2.0.4 [ 118s] ============================================================================ [ 118s] # TOTAL: 7 [ 118s] # PASS: 7 [ 118s] # SKIP: 0 [ 118s] # XFAIL: 0 [ 118s] # FAIL: 0 [ 118s] # XPASS: 0 [ 118s] # ERROR: 0 [ 118s] ============================================================================ [ 118s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4/tests' [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.4' [ 118s] + exit 0 [ 118s] Processing files: kbd-2.0.4-1.1.aarch64 [ 118s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 118s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 118s] [ 118s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Fdxotq [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd kbd-2.0.4 [ 118s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/licenses/kbd [ 118s] + export LICENSEDIR [ 118s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/licenses/kbd [ 118s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64/usr/share/licenses/kbd [ 118s] + exit 0 [ 118s] Provides: kbd = 2.0.4-1.1 kbd(aarch-64) = 2.0.4-1.1 [ 118s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 118s] Requires: /bin/sh ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libpam.so.0()(64bit) libpam.so.0(LIBPAM_1.0)(64bit) libpam_misc.so.0()(64bit) libpam_misc.so.0(LIBPAM_MISC_1.0)(64bit) [ 118s] Processing files: kbd-debugsource-2.0.4-1.1.aarch64 [ 118s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 118s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 118s] [ 118s] Provides: kbd-debugsource = 2.0.4-1.1 kbd-debugsource(aarch-64) = 2.0.4-1.1 [ 118s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 118s] Processing files: kbd-misc-2.0.4-1.1.noarch [ 118s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 118s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 118s] [ 120s] Provides: kbd-misc = 2.0.4-1.1 [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Processing files: kbd-docs-2.0.4-1.1.aarch64 [ 120s] Provides: kbd-docs = 2.0.4-1.1 kbd-docs(aarch-64) = 2.0.4-1.1 [ 120s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 120s] Processing files: kbd-debuginfo-2.0.4-1.1.aarch64 [ 120s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 120s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 120s] [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] warning: File listed twice: /usr/lib/debug/.build-id [ 120s] Provides: kbd-debuginfo = 2.0.4-1.1 kbd-debuginfo(aarch-64) = 2.0.4-1.1 [ 120s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 120s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 [ 120s] warning: Could not canonicalize hostname: obspw26 [ 120s] Wrote: /home/abuild/rpmbuild/SRPMS/kbd-2.0.4-1.1.src.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/kbd-2.0.4-1.1.aarch64.rpm [ 120s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/kbd-debugsource-2.0.4-1.1.aarch64.rpm [ 121s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/kbd-misc-2.0.4-1.1.noarch.rpm [ 121s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/kbd-docs-2.0.4-1.1.aarch64.rpm [ 121s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/kbd-debuginfo-2.0.4-1.1.aarch64.rpm [ 121s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Ntb7qj [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd kbd-2.0.4 [ 121s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.4-1.1.aarch64 [ 121s] + exit 0 [ 121s] ... checking for files with abuild user/group [ 121s] ... creating baselibs [ 122s] [ 122s] obspw26 finished "build kbd.spec" at Thu Oct 31 03:32:59 UTC 2019. [ 122s] Retried build at Thu Oct 31 05:29:07 2019 returned same result, skipped Retried build at Thu Oct 31 06:34:13 2019 returned same result, skipped Retried build at Thu Oct 31 07:42:42 2019 returned same result, skipped Retried build at Thu Oct 31 09:01:00 2019 returned same result, skipped Retried build at Thu Oct 31 10:09:50 2019 returned same result, skipped Retried build at Thu Oct 31 11:52:33 2019 returned same result, skipped Retried build at Sat Nov 9 00:38:22 2019 returned same result, skipped Retried build at Tue Dec 10 03:21:40 2019 returned same result, skipped Retried build at Wed Apr 1 13:30:35 2020 returned same result, skipped Retried build at Fri Apr 3 15:51:05 2020 returned same result, skipped Retried build at Fri Apr 10 15:44:47 2020 returned same result, skipped Retried build at Fri May 8 17:06:22 2020 returned same result, skipped