[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw11 started "build _service:gbs:capi-system-sensor.spec" at Fri May 22 16:14:42 UTC 2020. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:5.5:Unified' repository 'standard' arch 'armv7l' srcmd5 'f56b8b104991e51ce6ff219ed902183c' [ 0s] [ 0s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling libncurses... [ 2s] [3/40] preinstalling setup... [ 2s] [4/40] preinstalling filesystem... [ 2s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libelf... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: girepository -> libgirepository [ 9s] breaking dependency libgirepository -> girepository [ 9s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 9s] breaking dependency pkgmgr-info-parser -> pkgmgr-info [ 9s] cycle: xmlsec1 -> xmlsec1-openssl [ 9s] breaking dependency xmlsec1-openssl -> xmlsec1 [ 9s] cycle: libkey-manager-client -> key-manager [ 9s] breaking dependency key-manager -> libkey-manager-client [ 9s] cycle: libsecurity-manager-client -> security-manager [ 9s] breaking dependency security-manager -> libsecurity-manager-client [ 9s] cycle: libsecurity-manager-client -> security-manager -> security-license-manager [ 9s] breaking dependency security-manager -> security-license-manager [ 9s] cycle: security-manager -> security-manager-policy [ 9s] breaking dependency security-manager -> security-manager-policy [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] cycle: libalarm -> alarm-server [ 9s] breaking dependency alarm-server -> libalarm [ 9s] done [ 9s] [1/207] installing boost-license-1.65.1-2.1 [ 10s] [2/207] installing ca-certificates-tizen-0.2.0-1.1 [ 10s] [3/207] installing default-ac-domains-0.1-1.1 [ 10s] [4/207] installing dlog-config-persistent-logs-5.5.7-23.1 [ 10s] [5/207] installing libmagic-data-5.37-2.10 [ 10s] [6/207] installing setup-0.9-3.5 [ 10s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [7/207] installing filesystem-3.1-1.1 [ 11s] [8/207] installing glibc-2.24-1.33 [ 11s] [9/207] installing libatomic-6.2.1-2.5 [ 12s] [10/207] installing libgcc-6.2.1-2.5 [ 13s] [11/207] installing bash-3.2.57-1.1 [ 13s] [12/207] installing binutils-2.27-2.9 [ 13s] [13/207] installing capi-base-common-0.4.54-1.1 [ 14s] [14/207] installing cpio-2.11-1.1 [ 14s] [15/207] installing diffutils-3.3-1.1 [ 14s] [16/207] installing findutils-4.3.8-1.84 [ 14s] [17/207] installing gdbm-1.8.3-1.89 [ 14s] [18/207] installing hostname-3.20-1.1 [ 15s] [19/207] installing iniparser-3.2-1.1 [ 15s] [20/207] installing libattr-2.4.47-1.91 [ 15s] [21/207] installing libbz2-1.0.6-1.77 [ 16s] [22/207] installing libcap-2.24-1.90 [ 16s] [23/207] installing libelf-0.153-1.14 [ 16s] [24/207] installing libelf0-0.8.13-1.7 [ 17s] [25/207] installing libexpat-2.2.7-1.67 [ 17s] [26/207] installing libext2fs-1.43.4-1.1 [ 17s] [27/207] installing libffi-3.1-1.1 [ 18s] [28/207] installing libfreebl3-3.34.1-1.54 [ 18s] [29/207] installing libgomp-6.2.1-2.5 [ 19s] [30/207] installing libgpg-error-1.27-1.1 [ 19s] [31/207] installing libitm-6.2.1-2.5 [ 19s] [32/207] installing libltdl-2.4.2-1.70 [ 20s] [33/207] installing liblua-5.1.5-1.7 [ 20s] [34/207] installing liblzma-5.2.4-1.65 [ 20s] [35/207] installing libopenssl11-1.1.1g-3.1 [ 20s] [36/207] installing libpcre-8.43-1.7 [ 21s] [37/207] installing libpopt-1.16-1.9 [ 21s] [38/207] installing libpython-2.7.15-1.23 [ 21s] [39/207] installing libsmack-1.3.1-1.7 [ 22s] [40/207] installing libsmartcols-2.30-1.13 [ 22s] [41/207] installing libsqlite-3.29.0-1.37 [ 22s] [42/207] installing libstdc++-6.2.1-2.5 [ 23s] [43/207] installing libuuid-2.30-1.13 [ 23s] [44/207] installing m4-1.4.17-1.1 [ 23s] [45/207] installing net-tools-2.0_20121208git-1.1 [ 23s] [46/207] installing nspr-4.12-1.7 [ 24s] [47/207] installing patch-2.7-1.9 [ 24s] [48/207] installing pkg-config-0.28-1.80 [ 24s] [49/207] installing sed-4.1c-1.1 [ 24s] [50/207] installing update-alternatives-1.18.15-2.1 [ 24s] [51/207] installing which-2.20-1.1 [ 24s] [52/207] installing xdgmime-0.0.13-1.1 [ 25s] [53/207] installing zlib-1.2.11-1.88 [ 25s] [54/207] installing shadow-utils-4.1.4.2-1.5 [ 25s] [55/207] installing build-compare-2015.04.28-1.32 [ 25s] [56/207] installing libstdc++-devel-6.2.1-2.5 [ 25s] [57/207] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 28s] [58/207] installing terminfo-base-full-6.1-1.52 [ 28s] [59/207] installing vconf-internal-keys-devel-0.0.172-14.1 [ 28s] [60/207] installing capi-base-common-devel-0.4.54-1.1 [ 28s] [61/207] installing cpp-6.2.1-2.5 [ 29s] [62/207] installing gcc-c++-6.2.1-2.5 [ 30s] [63/207] installing sensord-dummy-4.0.54-15.1 [ 30s] [64/207] installing context-sensor-recorder-dummy-4.0.1-1.2 [ 30s] [65/207] installing coreutils-6.9-2.13 [ 30s] [66/207] installing db4-4.8.30.NC-1.81 [ 31s] [67/207] installing gawk-3.1.5-2.1 [ 31s] [68/207] installing grep-2.5.2-1.1 [ 31s] [69/207] installing libacl-2.2.52-1.90 [ 31s] [70/207] installing libasm-0.153-1.14 [ 31s] [71/207] installing libblkid-2.30-1.13 [ 32s] [72/207] installing libcap-tools-2.24-1.90 [ 32s] [73/207] installing libcc1-6.2.1-2.5 [ 32s] [74/207] installing libgcrypt-1.8.3-1.1 [ 32s] [75/207] installing libgfortran-6.2.1-2.5 [ 33s] [76/207] installing libglib-2.52.2-2.4 [ 33s] [77/207] installing libnss-security-manager-1.5.25-8.4 [ 33s] [78/207] installing libpcreposix-8.43-1.7 [ 34s] [79/207] installing libubsan-6.2.1-2.5 [ 34s] [80/207] installing make-4.0-1.12 [ 34s] [81/207] installing minizip-1.2.11-1.88 [ 34s] [82/207] installing nss-certs-3.34.1-1.54 [ 35s] [83/207] installing smack-1.3.1-1.7 [ 35s] [84/207] installing boost-program-options-1.65.1-2.1 [ 35s] [85/207] installing bzip2-1.0.6-1.77 [ 35s] [86/207] installing libkmod-26-1.1 [ 35s] [87/207] installing libmagic-5.37-2.10 [ 35s] [88/207] installing libpcrecpp-8.43-1.7 [ 36s] [89/207] installing libxml2-2.9.7-1.32 [ 36s] [90/207] installing ttrace-1.0.3-1.6 [ 36s] [91/207] installing xz-5.2.4-1.65 [ 37s] [92/207] installing cynara-db-migration-0.14.24-1.1 [ 37s] [93/207] installing libdw-0.153-1.14 [ 37s] [94/207] installing linux-glibc-devel-3.10-1.90 [ 38s] [95/207] installing file-5.37-2.10 [ 38s] [96/207] installing glibc-locale-2.24-1.33 [ 39s] [97/207] installing libgmodule-2.52.2-2.4 [ 39s] [98/207] installing libgthread-2.52.2-2.4 [ 40s] [99/207] installing libmount-2.30-1.13 [ 40s] [100/207] installing tar-1.17-1.1 [ 40s] [101/207] installing tizen-platform-config-5.0-2.1 [ 41s] [102/207] installing gzip-1.3.12-1.92 [ 41s] [103/207] installing libfdisk-2.30-1.13 [ 41s] [104/207] installing libgobject-2.52.2-2.4 [ 42s] [105/207] installing libncurses6-6.1-1.52 [ 42s] [106/207] installing libxslt-1.1.34-3.1 [ 42s] [107/207] installing pam-1.1.6-1.1 [ 43s] [108/207] installing perl-5.30.0-1.17 [ 45s] [109/207] installing tzdata-2019a-1.1 [ 45s] [110/207] installing pcre-devel-8.43-1.7 [ 46s] [111/207] installing elfutils-0.153-1.14 [ 46s] [112/207] installing security-config-1.0-16.1 [ 59s] groupadd: group 'dbus' already exists [ 59s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 59s] [113/207] installing libarchive-3.3.3-1.1 [ 60s] [114/207] installing shared-mime-info-1.7-1.1 [ 68s] [115/207] installing gcc-6.2.1-2.5 [ 69s] [116/207] installing build-mkbaselibs-20120927-1.1 [ 69s] [117/207] installing libncurses-6.1-1.52 [ 69s] [118/207] installing glibc-devel-2.24-1.33 [ 69s] [119/207] installing qemu-accel-x86_64-armv7l-0.4-1.9 [ 76s] [120/207] installing autoconf-2.69-1.33 [ 77s] [121/207] installing ca-certificates-0.0.4-1.1 [ 77s] [122/207] installing less-466-1.1 [ 77s] [123/207] installing libreadline-5.2-1.33 [ 77s] [124/207] installing libtzplatform-config-5.0-2.1 [ 78s] [125/207] installing procps-ng-3.3.15-2.1 [ 78s] [126/207] installing libsystemd-231-9.1 [ 79s] [127/207] installing cmake-3.9.4-1.1 [ 79s] [128/207] installing systemd-231-9.1 [ 81s] Running systemd %posttrans script [ 81s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 81s] [129/207] installing libtzplatform-config-devel-5.0-2.1 [ 81s] [130/207] installing automake-1.15.1-1.60 [ 82s] [131/207] installing systemd-devel-231-9.1 [ 82s] [132/207] installing tizen-platform-config-tools-5.0-2.1 [ 82s] [133/207] installing sqlite-3.29.0-1.37 [ 82s] [134/207] installing build-20120927-1.1 [ 82s] [135/207] installing libdlog-5.5.7-23.1 [ 82s] Running in chroot, ignoring request. [ 82s] [136/207] installing python-2.7.15-1.23 [ 83s] [137/207] installing util-linux-2.30-1.13 [ 84s] [138/207] installing libdlog-devel-5.5.7-23.1 [ 84s] [139/207] installing libtracker-1.0.1-1.1 [ 84s] [140/207] installing libtool-2.4.2-1.70 [ 84s] [141/207] installing python-xml-2.7.15-1.23 [ 84s] [142/207] installing sqlite-devel-3.29.0-1.37 [ 84s] [143/207] installing util-linux-su-2.30-1.13 [ 84s] [144/207] installing argos_watchdog-0.0.3-1.1 [ 84s] [145/207] installing libkey-manager-common-0.1.32-1.3 [ 85s] [146/207] installing libcynara-commons-0.14.24-1.1 [ 85s] [147/207] installing capi-system-info-0.5.1-1.1 [ 86s] Running capi-system-info %posttrans script [ 86s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 86s] iniparser: cannot open /etc/info.ini [ 86s] [148/207] installing pkgmgr-0.11.9-3.1 [ 87s] Running pkgmgr %posttrans script [ 87s] /var/tmp/rpm-tmp.24wE44: line 4: pkg_initdb: command not found [ 87s] /var/tmp/rpm-tmp.24wE44: line 5: install_preload_pkg: command not found [ 87s] /var/tmp/rpm-tmp.24wE44: line 12: pkgcmd: command not found [ 87s] /var/tmp/rpm-tmp.24wE44: line 14: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 87s] [149/207] installing libcynara-agent-0.14.24-1.1 [ 87s] [150/207] installing libcynara-client-0.14.24-1.1 [ 87s] [151/207] installing libcynara-creds-commons-0.14.24-1.1 [ 88s] [152/207] installing libcynara-session-0.14.24-1.1 [ 88s] [153/207] installing libcynara-admin-0.14.24-1.1 [ 88s] [154/207] installing cynara-0.14.24-1.1 [ 89s] Running in chroot, ignoring request. [ 89s] Running in chroot, ignoring request. [ 89s] [155/207] installing cyad-0.14.24-1.1 [ 89s] [156/207] installing libcynara-creds-socket-0.14.24-1.1 [ 90s] [157/207] installing xmlsec1-openssl-1.2.28-1.5 [ 90s] [158/207] installing nss-3.34.1-1.54 [ 91s] [159/207] installing libgio-2.52.2-2.4 [ 91s] [160/207] installing gio-branding-upstream-2.52.2-2.4 [ 92s] [161/207] installing libjson-glib-1.4.2-1.1 [ 92s] [162/207] installing xmlsec1-1.2.28-1.5 [ 92s] [163/207] installing libcynara-creds-gdbus-0.14.24-1.1 [ 93s] [164/207] installing libsoftokn3-3.34.1-1.54 [ 94s] [165/207] installing glib2-tools-2.52.2-2.4 [ 94s] [166/207] installing context-common-4.0.3-1.1 [ 94s] [167/207] installing libgirepository-1.52.1-1.1 [ 95s] [168/207] installing pkgmgr-info-parser-0.17.8-4.1 [ 95s] [169/207] installing rpm-4.11.0.1-1.42 [ 96s] [170/207] installing buxton2-1.5.11-4.1 [ 97s] Running buxton2 %posttrans script [ 97s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 97s] /etc/buxton2/*: No such file or directory [ 97s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 97s] /var/lib/buxton2/*: No such file or directory [ 97s] [171/207] installing girepository-1.52.1-1.1 [ 98s] [172/207] installing vconf-compat-1.5.11-4.1 [ 98s] [173/207] installing bundle-0.4.5-4.1 [ 99s] [174/207] installing glib2-devel-2.52.2-2.4 [ 99s] [175/207] installing rpm-build-4.11.0.1-1.42 [ 99s] [176/207] installing typelib-Json-1.4.2-1.1 [ 99s] [177/207] installing bundle-devel-0.4.5-4.1 [ 100s] [178/207] installing vconf-compat-devel-1.5.11-4.1 [ 100s] [179/207] installing eventsystem-0.1.10-2.1 [ 100s] [180/207] installing capi-system-device-0.1.0-6.1 [ 101s] [181/207] installing libstorage-1.0.0-1.1 [ 102s] [182/207] installing pkgmgr-info-0.17.8-4.1 [ 102s] [183/207] installing sensord-devel-4.0.54-15.1 [ 102s] [184/207] installing json-glib-devel-1.4.2-1.1 [ 102s] [185/207] installing pkgmgr-installer-0.11.9-3.1 [ 102s] [186/207] installing pkgmgr-client-0.11.9-3.1 [ 103s] [187/207] installing security-privilege-manager-1.1.12-6.9 [ 103s] mdm blacklist exist [ 103s] Check inserted data [ 103s] DPM blacklist... [ 103s] [ 103s] MDM blacklist... [ 103s] [188/207] installing capi-appfw-package-manager-0.8.5-3.1 [ 104s] [189/207] installing security-manager-1.5.25-8.4 [ 104s] Running in chroot, ignoring request. [ 104s] Running in chroot, ignoring request. [ 104s] [190/207] installing aul-0.23.4-22.1 [ 105s] [191/207] installing app-svc-0.1.57-1.2 [ 105s] [192/207] installing security-manager-policy-1.5.25-8.4 [ 116s] Running in chroot, ignoring request. [ 116s] Running in chroot, ignoring request. [ 116s] [193/207] installing libsecurity-manager-client-1.5.25-8.4 [ 116s] [194/207] installing app-core-common-1.14.5-5.1 [ 116s] [195/207] installing capi-appfw-app-control-0.12.0-3.1 [ 117s] [196/207] installing security-license-manager-1.5.25-8.4 [ 117s] Running in chroot, ignoring request. [ 117s] Running in chroot, ignoring request. [ 117s] [197/207] installing key-manager-0.1.32-1.3 [ 118s] Running in chroot, ignoring request. [ 118s] Running in chroot, ignoring request. [ 118s] [198/207] installing capi-appfw-app-control-devel-0.12.0-3.1 [ 118s] [199/207] installing libkey-manager-client-0.1.32-1.3 [ 118s] [200/207] installing notification-0.5.68-21.1 [ 118s] [201/207] installing notification-devel-0.5.68-21.1 [ 118s] [202/207] installing cert-svc-2.2.1-2.1 [ 119s] Running in chroot, ignoring request. [ 119s] Running in chroot, ignoring request. [ 119s] [203/207] installing alarm-server-0.10.11-6.1 [ 120s] Running alarm-server %posttrans script [ 120s] [204/207] installing libalarm-0.10.11-6.1 [ 120s] [205/207] installing libalarm-devel-0.10.11-6.1 [ 120s] [206/207] installing context-common-devel-4.0.3-1.1 [ 120s] [207/207] installing context-sensor-recorder-devel-4.0.1-1.2 [ 120s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 120s] now finalizing build dir... [ 121s] Running build time source services... [ 121s] build target is armv7l-tizen-linux [ 121s] ----------------------------------------------------------------- [ 121s] I have the following modifications for capi-system-sensor.spec: [ 121s] 5c5 [ 121s] < Release: 1 [ 121s] --- [ 121s] > Release: 6.1 [ 121s] ----------------------------------------------------------------- [ 121s] ----- building capi-system-sensor.spec (user abuild) [ 121s] ----------------------------------------------------------------- [ 121s] ----------------------------------------------------------------- [ 121s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified/standard/f56b8b104991e51ce6ff219ed902183c-capi-system-sensor' -ba /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 121s] Building target platforms: armv7l-tizen-linux [ 121s] Building for target armv7l-tizen-linux [ 121s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.gmshLs [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + rm -rf capi-system-sensor-0.2.5 [ 121s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.2.5.tar.gz [ 121s] + /bin/tar -xf - [ 121s] + STATUS=0 [ 121s] + '[' 0 -ne 0 ']' [ 121s] + cd capi-system-sensor-0.2.5 [ 121s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 121s] + exit 0 [ 121s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.jM2yP0 [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd capi-system-sensor-0.2.5 [ 121s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 121s] + LANG=C [ 121s] + export LANG [ 121s] + unset DISPLAY [ 121s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 121s] + export CFLAGS [ 121s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 121s] + export CXXFLAGS [ 121s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 121s] + export FFLAGS [ 121s] + LDFLAGS= [ 121s] + export LDFLAGS [ 121s] ++ echo 0.2.5 [ 121s] ++ awk 'BEGIN {FS="."}{print $1}' [ 121s] + MAJORVER=0 [ 121s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 121s] + export CFLAGS [ 121s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 121s] + export CXXFLAGS [ 121s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 121s] + export FFLAGS [ 121s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.2.5 -DMAJORVER=0 -DSENSOR_RECORDER=on [ 121s] -- The C compiler identification is GNU 6.2.1 [ 121s] -- The CXX compiler identification is GNU 6.2.1 [ 121s] -- Check for working C compiler: /usr/bin/cc [ 121s] -- Check for working C compiler: /usr/bin/cc -- works [ 121s] -- Detecting C compiler ABI info [ 121s] -- Detecting C compiler ABI info - done [ 121s] -- Detecting C compile features [ 122s] -- Detecting C compile features - done [ 122s] -- Check for working CXX compiler: /usr/bin/c++ [ 122s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 122s] -- Detecting CXX compiler ABI info [ 122s] -- Detecting CXX compiler ABI info - done [ 122s] -- Detecting CXX compile features [ 122s] -- Detecting CXX compile features - done [ 122s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 122s] -- Checking for module 'dlog sensor capi-base-common context-sensor-recorder-client' [ 122s] -- Found dlog sensor capi-base-common context-sensor-recorder-client, version 1.0;4.0.54;0.4.54;4.0.1 [ 123s] -- Configuring done [ 123s] -- Generating done [ 123s] CMake Warning: [ 123s] Manually-specified variables were not used by the project: [ 123s] [ 123s] INCLUDE_INSTALL_DIR [ 123s] SHARE_INSTALL_PREFIX [ 123s] SYSCONF_INSTALL_DIR [ 123s] [ 123s] [ 123s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 123s] + /bin/make -j4 [ 123s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 123s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 123s] /bin/make -f CMakeFiles/Makefile2 all [ 123s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 123s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 123s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 123s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 123s] Scanning dependencies of target capi-system-sensor [ 123s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 123s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 123s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 123s] [ 16%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 123s] [ 33%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o [ 123s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -o CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor.cpp [ 123s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_provider.cpp [ 123s] [ 66%] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 123s] [ 66%] Building C object CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o [ 123s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/geomagnetic_field.c [ 123s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/fusion_util.c [ 123s] [ 83%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o [ 123s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_recorder.cpp [ 124s] [100%] Linking CXX shared library libcapi-system-sensor.so [ 124s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-sensor.dir/link.txt --verbose=1 [ 124s] /usr/bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -shared -Wl,-soname,libcapi-system-sensor.so.0 -o libcapi-system-sensor.so.0.2.5 CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -L/usr//usr/lib -lsensor -lvconf -lcontext-sensor-recorder-client -ljson-glib-1.0 -lcontext-client -lcontext-shared -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcapi-base-common -ldlog -lsqlite3 [ 124s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-sensor.so.0.2.5 libcapi-system-sensor.so.0 libcapi-system-sensor.so [ 124s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] [100%] Built target capi-system-sensor [ 124s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 124s] + exit 0 [ 124s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UX0ABI [ 124s] + umask 022 [ 124s] + cd /home/abuild/rpmbuild/BUILD [ 124s] + cd capi-system-sensor-0.2.5 [ 124s] + LANG=C [ 124s] + export LANG [ 124s] + unset DISPLAY [ 124s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm [ 124s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm [ 124s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm install [ 124s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 124s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 124s] /bin/make -f CMakeFiles/Makefile2 all [ 124s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 124s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 124s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 124s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] make[2]: Nothing to be done for 'CMakeFiles/capi-system-sensor.dir/build'. [ 124s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] [100%] Built target capi-system-sensor [ 124s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 124s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 124s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] make[1]: Nothing to be done for 'preinstall'. [ 124s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 124s] Install the project... [ 124s] /usr/bin/cmake -P cmake_install.cmake [ 124s] -- Install configuration: "" [ 124s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/lib/pkgconfig/capi-system-sensor.pc [ 124s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/include/sensor/sensor.h [ 124s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/lib/libcapi-system-sensor.so.0.2.5 [ 124s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/lib/libcapi-system-sensor.so.0 [ 124s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/lib/libcapi-system-sensor.so [ 124s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/share/info/dir [ 124s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm -regex '.*\.la$' [ 124s] + xargs rm -f -- [ 124s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm -regex '.*\.a$' [ 124s] + xargs rm -f -- [ 124s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 124s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/lib/libcapi-system-sensor.so.0.2.5 [ 125s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 125s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 125s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 125s] 299 blocks [ 125s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/capi-system-sensor-debuginfo.manifest [ 125s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/capi-system-sensor-debugsource.manifest [ 125s] + /usr/lib/rpm/check-buildroot [ 125s] + /usr/lib/rpm//brp-compress [ 125s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 125s] + /usr/lib/rpm/brp-python-hardlink [ 125s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm [ 125s] Processing files: capi-system-sensor-0.2.5-6.1.armv7l [ 125s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 125s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 125s] [ 125s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Bxk9ws [ 125s] + umask 022 [ 125s] + cd /home/abuild/rpmbuild/BUILD [ 125s] + cd capi-system-sensor-0.2.5 [ 125s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/share/licenses/capi-system-sensor [ 125s] + export LICENSEDIR [ 125s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/share/licenses/capi-system-sensor [ 125s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm/usr/share/licenses/capi-system-sensor [ 125s] + exit 0 [ 125s] Provides: capi-system-sensor = 0.2.5-6.1 capi-system-sensor(armv7l-32) = 0.2.5-6.1 capi-system-sensor-profile_common = 0.2.5-6.1 capi-system-sensor-profile_ivi = 0.2.5-6.1 capi-system-sensor-profile_mobile = 0.2.5-6.1 capi-system-sensor-profile_tv = 0.2.5-6.1 capi-system-sensor-profile_wearable = 0.2.5-6.1 libcapi-system-sensor.so.0 [ 125s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 125s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 125s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 125s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 125s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcontext-sensor-recorder-client.so.4 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libsensor.so.4 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.21) rtld(GNU_HASH) [ 125s] Processing files: capi-system-sensor-debugsource-0.2.5-6.1.armv7l [ 125s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 125s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 125s] [ 125s] Provides: capi-system-sensor-debugsource = 0.2.5-6.1 capi-system-sensor-debugsource(armv7l-32) = 0.2.5-6.1 [ 125s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 125s] Processing files: capi-system-sensor-devel-0.2.5-6.1.armv7l [ 125s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 125s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 125s] [ 125s] Provides: capi-system-sensor-devel = 0.2.5-6.1 capi-system-sensor-devel(armv7l-32) = 0.2.5-6.1 pkgconfig(capi-system-sensor) = 0.2.5 [ 125s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 125s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0 pkgconfig(capi-base-common) pkgconfig(context-sensor-recorder-client) pkgconfig(dlog) pkgconfig(sensor) [ 125s] Processing files: capi-system-sensor-debuginfo-0.2.5-6.1.armv7l [ 125s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 125s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 125s] [ 125s] Provides: capi-system-sensor-debuginfo = 0.2.5-6.1 capi-system-sensor-debuginfo(armv7l-32) = 0.2.5-6.1 [ 125s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 125s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm [ 125s] warning: Could not canonicalize hostname: obsnw11 [ 125s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-6.1.src.rpm [ 125s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.2.5-6.1.armv7l.rpm [ 125s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.2.5-6.1.armv7l.rpm [ 125s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.2.5-6.1.armv7l.rpm [ 126s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.2.5-6.1.armv7l.rpm [ 126s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Rjr991 [ 126s] + umask 022 [ 126s] + cd /home/abuild/rpmbuild/BUILD [ 126s] + cd capi-system-sensor-0.2.5 [ 126s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.arm [ 126s] + exit 0 [ 126s] ... checking for files with abuild user/group [ 126s] ... creating baselibs [ 126s] ... comparing built packages with the former built [ 126s] /usr/lib/build/pkg-diff.sh [ 126s] compare /.build.oldpackages/capi-system-sensor-0.2.5-5.1.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-6.1.src.rpm [ 127s] This is not a prerelease project. Compare the project name. [ 127s] comparing rpmtags [ 127s] comparing RELEASE [ 127s] comparing PROVIDES [ 127s] comparing scripts [ 127s] comparing filelist [ 127s] comparing file checksum [ 127s] RPM meta information is identical [ 127s] compare /.build.oldpackages/capi-system-sensor-0.2.5-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.2.5-6.1.armv7l.rpm [ 127s] Comparing capi-system-sensor-0.2.5-5.1.armv7l.rpm to capi-system-sensor-0.2.5-6.1.armv7l.rpm [ 127s] This is not a prerelease project. Compare the project name. [ 127s] comparing rpmtags [ 127s] --- /tmp/tmp.KRKA108368/tmp.jQWM108388 2020-05-22 16:16:49.561214372 +0000 [ 127s] +++ /tmp/tmp.KRKA108368/tmp.jVUc108396 2020-05-22 16:16:49.621214458 +0000 [ 127s] @@ -2,10 +2,10 @@ [ 127s] A Sensor library in TIZEN C API [ 127s] A Sensor Library in TIZEN C API package. [ 127s] tizen [ 127s] - Apache-2.0 and PD Apache-2.0 and PD [ 127s] + Apache-2.0 Apache-2.0 [ 127s] System/API (none) (none) (none) (none) [ 127s] (none) 4.11.0.1 armv7l-tizen-linux [ 127s] cpio xz 5T [ 127s] [ 127s] (none) (none) (none) [ 127s] -obs://build.tizen.org/Tizen:5.5:Unified/standard/8758b63bf644fef8a83c2b4899fb9875-capi-system-sensor Tizen:5.5:Unified [ 127s] +obs://build.tizen.org/Tizen:5.5:Unified/standard/f56b8b104991e51ce6ff219ed902183c-capi-system-sensor Tizen:5.5:Unified [ 127s] RPM meta information is different [ 127s] compare /.build.oldpackages/capi-system-sensor-debuginfo-0.2.5-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.2.5-6.1.armv7l.rpm [ 127s] skipping -debuginfo package [ 127s] compare /.build.oldpackages/capi-system-sensor-debugsource-0.2.5-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.2.5-6.1.armv7l.rpm [ 127s] Comparing capi-system-sensor-debugsource-0.2.5-5.1.armv7l.rpm to capi-system-sensor-debugsource-0.2.5-6.1.armv7l.rpm [ 127s] This is not a prerelease project. Compare the project name. [ 127s] comparing rpmtags [ 127s] --- /tmp/tmp.TKSo108444/tmp.MTNn108495 2020-05-22 16:16:49.905214864 +0000 [ 127s] +++ /tmp/tmp.TKSo108444/tmp.gnwl108500 2020-05-22 16:16:49.913214876 +0000 [ 127s] @@ -4,10 +4,10 @@ [ 127s] Debug sources are useful when developing applications that use this [ 127s] package or when debugging this package. [ 127s] tizen [ 127s] - Apache-2.0 and PD Apache-2.0 and PD [ 127s] + Apache-2.0 Apache-2.0 [ 127s] Development/Debug (none) (none) (none) (none) [ 127s] (none) 4.11.0.1 armv7l-tizen-linux [ 127s] cpio xz 5T [ 127s] [ 127s] (none) (none) (none) [ 127s] -obs://build.tizen.org/Tizen:5.5:Unified/standard/8758b63bf644fef8a83c2b4899fb9875-capi-system-sensor Tizen:5.5:Unified [ 127s] +obs://build.tizen.org/Tizen:5.5:Unified/standard/f56b8b104991e51ce6ff219ed902183c-capi-system-sensor Tizen:5.5:Unified [ 127s] RPM meta information is different [ 127s] compare /.build.oldpackages/capi-system-sensor-devel-0.2.5-5.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.2.5-6.1.armv7l.rpm [ 128s] Comparing capi-system-sensor-devel-0.2.5-5.1.armv7l.rpm to capi-system-sensor-devel-0.2.5-6.1.armv7l.rpm [ 128s] This is not a prerelease project. Compare the project name. [ 128s] comparing rpmtags [ 128s] --- /tmp/tmp.WeOu108529/tmp.AIXR108563 2020-05-22 16:16:50.161216883 +0000 [ 128s] +++ /tmp/tmp.WeOu108529/tmp.Pjrs108568 2020-05-22 16:16:50.173217026 +0000 [ 128s] @@ -4,10 +4,10 @@ [ 128s] This package contains all necessary include files and libraries needed [ 128s] to develop applications that require capi-system-sensor. [ 128s] tizen [ 128s] - Apache-2.0 and PD Apache-2.0 and PD [ 128s] + Apache-2.0 Apache-2.0 [ 128s] System/Development (none) (none) (none) (none) [ 128s] (none) 4.11.0.1 armv7l-tizen-linux [ 128s] cpio xz 5T [ 128s] [ 128s] (none) (none) (none) [ 128s] -obs://build.tizen.org/Tizen:5.5:Unified/standard/8758b63bf644fef8a83c2b4899fb9875-capi-system-sensor Tizen:5.5:Unified [ 128s] +obs://build.tizen.org/Tizen:5.5:Unified/standard/f56b8b104991e51ce6ff219ed902183c-capi-system-sensor Tizen:5.5:Unified [ 128s] RPM meta information is different [ 128s] [ 128s] obsnw11 finished "build capi-system-sensor.spec" at Fri May 22 16:16:50 UTC 2020. [ 128s] Retried build at Wed May 27 17:59:49 2020 returned same result, skipped Retried build at Thu May 28 04:42:32 2020 returned same result, skipped Retried build at Thu May 28 14:18:46 2020 returned same result, skipped Retried build at Mon Jun 1 01:50:59 2020 returned same result, skipped Retried build at Thu Jun 4 00:15:04 2020 returned same result, skipped Retried build at Tue Jun 16 16:50:11 2020 returned same result, skipped Retried build at Wed Jun 17 19:50:14 2020 returned same result, skipped Retried build at Sat Jun 20 09:40:33 2020 returned same result, skipped Retried build at Thu Jun 25 17:58:22 2020 returned same result, skipped Retried build at Wed Jul 1 17:03:17 2020 returned same result, skipped Retried build at Fri Jul 17 04:46:52 2020 returned same result, skipped Retried build at Wed Jul 22 11:27:58 2020 returned same result, skipped Retried build at Fri Jul 24 22:43:32 2020 returned same result, skipped Retried build at Wed Jul 29 23:32:00 2020 returned same result, skipped Retried build at Mon Aug 3 00:08:14 2020 returned same result, skipped Retried build at Tue Aug 4 00:23:37 2020 returned same result, skipped Retried build at Tue Aug 4 16:59:40 2020 returned same result, skipped Retried build at Wed Aug 5 05:38:28 2020 returned same result, skipped Retried build at Thu Aug 6 00:24:06 2020 returned same result, skipped