[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw08 started "build _service:gbs:cryptsetup.spec" at Thu Oct 31 11:56:29 UTC 2019. [ 0s] [ 0s] Building cryptsetup for project 'Tizen:5.5:Unified' repository 'standard' arch 'armv7l' srcmd5 '7cb0432b845e9f74b563c97dcc303593' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libelf... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/110] installing libmagic-data-5.37-1.46 [ 9s] [2/110] installing setup-0.9-1.2 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/110] installing filesystem-3.1-1.1 [ 9s] [4/110] installing glibc-2.24-1.22 [ 9s] [5/110] installing libatomic-6.2.1-1.3 [ 9s] [6/110] installing libgcc-6.2.1-1.3 [ 10s] [7/110] installing bash-3.2.57-1.1 [ 10s] [8/110] installing binutils-2.27-1.28 [ 10s] [9/110] installing cpio-2.11-1.1 [ 10s] [10/110] installing diffutils-3.3-1.1 [ 10s] [11/110] installing findutils-4.3.8-1.70 [ 10s] [12/110] installing gdbm-1.8.3-1.74 [ 11s] [13/110] installing hostname-3.20-1.1 [ 11s] [14/110] installing libattr-2.4.47-1.76 [ 11s] [15/110] installing libbz2-1.0.6-1.63 [ 11s] [16/110] installing libcap-2.24-1.75 [ 12s] [17/110] installing libelf-0.153-1.9 [ 12s] [18/110] installing libext2fs-1.43.4-1.1 [ 12s] [19/110] installing libfreebl3-3.34.1-1.42 [ 12s] [20/110] installing libgomp-6.2.1-1.3 [ 13s] [21/110] installing libgpg-error-1.27-1.1 [ 13s] [22/110] installing libitm-6.2.1-1.3 [ 13s] [23/110] installing libltdl-2.4.2-1.55 [ 14s] [24/110] installing liblua-5.1.5-1.2 [ 14s] [25/110] installing liblzma-5.2.4-1.53 [ 14s] [26/110] installing libpcre-8.43-1.3 [ 15s] [27/110] installing libpopt-1.16-1.4 [ 15s] [28/110] installing libsmack-1.3.1-1.2 [ 15s] [29/110] installing libsmartcols-2.30-1.1 [ 16s] [30/110] installing libsqlite-3.29.0-1.28 [ 16s] [31/110] installing libstdc++-6.2.1-1.3 [ 16s] [32/110] installing libuuid-2.30-1.1 [ 17s] [33/110] installing m4-1.4.17-1.1 [ 17s] [34/110] installing net-tools-2.0_20121208git-1.1 [ 17s] [35/110] installing nspr-4.12-1.2 [ 17s] [36/110] installing patch-2.7-1.4 [ 17s] [37/110] installing pkg-config-0.28-1.66 [ 17s] [38/110] installing sed-4.1c-1.1 [ 17s] [39/110] installing update-alternatives-1.18.15-1.1 [ 17s] [40/110] installing which-2.20-1.1 [ 17s] [41/110] installing zlib-1.2.11-1.73 [ 18s] [42/110] installing shadow-utils-4.1.4.2-1.1 [ 18s] [43/110] installing build-compare-2015.04.28-1.17 [ 18s] [44/110] installing libstdc++-devel-6.2.1-1.3 [ 18s] [45/110] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 19s] [46/110] installing terminfo-base-full-6.1-1.40 [ 20s] [47/110] installing cpp-6.2.1-1.3 [ 20s] [48/110] installing gcc-c++-6.2.1-1.3 [ 21s] [49/110] installing libuuid-devel-2.30-1.1 [ 21s] [50/110] installing popt-devel-1.16-1.4 [ 21s] [51/110] installing coreutils-6.9-1.5 [ 21s] [52/110] installing db4-4.8.30.NC-1.67 [ 21s] [53/110] installing gawk-3.1.5-1.1 [ 21s] [54/110] installing grep-2.5.2-1.1 [ 21s] [55/110] installing libacl-2.2.52-1.76 [ 22s] [56/110] installing libasm-0.153-1.9 [ 22s] [57/110] installing libblkid-2.30-1.1 [ 22s] [58/110] installing libcc1-6.2.1-1.3 [ 22s] [59/110] installing libgcrypt-1.8.3-1.1 [ 23s] [60/110] installing libgfortran-6.2.1-1.3 [ 23s] [61/110] installing libubsan-6.2.1-1.3 [ 23s] [62/110] installing make-4.0-1.7 [ 24s] [63/110] installing nss-certs-3.34.1-1.42 [ 24s] [64/110] installing smack-1.3.1-1.2 [ 24s] [65/110] installing bzip2-1.0.6-1.63 [ 24s] [66/110] installing gettext-runtime-0.19.8.1-1.13 [ 24s] [67/110] installing libkmod-26-1.1 [ 24s] [68/110] installing libmagic-5.37-1.46 [ 25s] [69/110] installing libxml2-2.9.7-1.23 [ 25s] [70/110] installing xz-5.2.4-1.53 [ 25s] [71/110] installing libdw-0.153-1.9 [ 25s] [72/110] installing linux-glibc-devel-3.10-1.75 [ 26s] [73/110] installing file-5.37-1.46 [ 26s] [74/110] installing glibc-locale-2.24-1.22 [ 27s] [75/110] installing libmount-2.30-1.1 [ 27s] [76/110] installing tar-1.17-1.1 [ 27s] [77/110] installing gettext-tools-0.19.8.1-1.13 [ 28s] [78/110] installing gzip-1.3.12-1.77 [ 28s] [79/110] installing libfdisk-2.30-1.1 [ 28s] [80/110] installing libncurses6-6.1-1.40 [ 28s] [81/110] installing pam-1.1.6-1.1 [ 29s] [82/110] installing perl-5.30.0-1.10 [ 30s] [83/110] installing tzdata-2019a-1.1 [ 31s] [84/110] installing elfutils-0.153-1.9 [ 31s] [85/110] installing gcc-6.2.1-1.3 [ 32s] [86/110] installing build-mkbaselibs-20120927-1.1 [ 32s] [87/110] installing libncurses-6.1-1.40 [ 32s] [88/110] installing glibc-devel-2.24-1.22 [ 32s] [89/110] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 39s] [90/110] installing autoconf-2.69-1.25 [ 39s] [91/110] installing less-466-1.1 [ 39s] [92/110] installing libreadline-5.2-1.24 [ 39s] [93/110] installing procps-ng-3.3.15-1.1 [ 40s] [94/110] installing libsystemd-231-1.1 [ 40s] [95/110] installing systemd-231-1.1 [ 42s] Running systemd %posttrans script [ 42s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 42s] [96/110] installing automake-1.15.1-1.46 [ 42s] [97/110] installing libdevmapper-1.02.77-1.1 [ 43s] [98/110] installing systemd-devel-231-1.1 [ 43s] [99/110] installing build-20120927-1.1 [ 43s] [100/110] installing libgpg-error-devel-1.27-1.1 [ 43s] [101/110] installing util-linux-2.30-1.1 [ 43s] [102/110] installing device-mapper-1.02.77-1.1 [ 43s] [103/110] installing libtool-2.4.2-1.55 [ 43s] [104/110] installing util-linux-su-2.30-1.1 [ 43s] [105/110] installing libgcrypt-devel-1.8.3-1.1 [ 43s] [106/110] installing device-mapper-devel-1.02.77-1.1 [ 43s] [107/110] installing nss-3.34.1-1.42 [ 43s] [108/110] installing libsoftokn3-3.34.1-1.42 [ 44s] [109/110] installing rpm-4.11.0.1-1.32 [ 44s] [110/110] installing rpm-build-4.11.0.1-1.32 [ 44s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 45s] Running build time source services... [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for cryptsetup.spec: [ 45s] 5c5 [ 45s] < Release: 1 [ 45s] --- [ 45s] > Release: 1.1 [ 45s] 24c24 [ 45s] < BuildRequires: gettext [ 45s] --- [ 45s] > BuildRequires: gettext-tools [ 45s] ----------------------------------------------------------------- [ 45s] ----- building cryptsetup.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified/standard/7cb0432b845e9f74b563c97dcc303593-cryptsetup' -ba /home/abuild/rpmbuild/SOURCES/cryptsetup.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DxPAzm [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf cryptsetup-1.6.7 [ 45s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/cryptsetup-1.6.7.tar.xz [ 45s] + /bin/tar -xf - [ 45s] + STATUS=0 [ 45s] + '[' 0 -ne 0 ']' [ 45s] + cd cryptsetup-1.6.7 [ 45s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 45s] + echo 'Patch #0 (4c6390a-to-064b272.diff):' [ 45s] Patch #0 (4c6390a-to-064b272.diff): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/4c6390a-to-064b272.diff [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file autogen.sh [ 45s] + echo 'Patch #1 (0002-Enable-ASLR-feature.patch):' [ 45s] Patch #1 (0002-Enable-ASLR-feature.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Enable-ASLR-feature.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/Makefile.am [ 45s] patching file src/Makefile.in [ 45s] + echo 'Patch #2 (0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch):' [ 45s] Patch #2 (0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file COPYING.GPL-2.0+ (renamed from COPYING) [ 45s] patching file COPYING.LGPL-2.1+ (renamed from COPYING.LGPL) [ 45s] + exit 0 [ 45s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TcRmlQ [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd cryptsetup-1.6.7 [ 45s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + LDFLAGS= [ 45s] + export LDFLAGS [ 45s] + chmod +x ./autogen.sh [ 45s] + ./autogen.sh --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib [ 47s] [ 47s] Generate build-system by: [ 47s] autopoint: /usr/bin/autopoint (GNU gettext-tools) 0.19.8.1 [ 48s] aclocal: aclocal (GNU automake) 1.15.1 [ 48s] autoconf: autoconf (GNU Autoconf) 2.69 [ 50s] automake: automake (GNU automake) 1.15.1 [ 50s] libtoolize: libtoolize (GNU libtool) 2.4.2 [ 50s] [ 55s] Copying file m4/codeset.m4 [ 55s] Copying file m4/glibc2.m4 [ 55s] Copying file m4/glibc21.m4 [ 55s] Copying file m4/intdiv0.m4 [ 55s] Copying file m4/intmax.m4 [ 56s] Copying file m4/inttypes-h.m4 [ 56s] Copying file m4/inttypes-pri.m4 [ 56s] Copying file m4/inttypes_h.m4 [ 56s] Copying file m4/lcmessage.m4 [ 56s] Copying file m4/lock.m4 [ 56s] Copying file m4/longdouble.m4 [ 56s] Copying file m4/longlong.m4 [ 56s] Copying file m4/printf-posix.m4 [ 56s] Copying file m4/signed.m4 [ 56s] Copying file m4/size_max.m4 [ 56s] Copying file m4/stdint_h.m4 [ 56s] Copying file m4/uintmax_t.m4 [ 56s] Copying file m4/ulonglong.m4 [ 56s] Copying file m4/visibility.m4 [ 56s] Copying file m4/wchar_t.m4 [ 56s] Copying file m4/wint_t.m4 [ 56s] Copying file m4/xsize.m4 [ 56s] Copying file po/Makevars.template [ 56s] libtoolize: putting auxiliary files in `.'. [ 56s] libtoolize: copying file `./ltmain.sh' [ 56s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 56s] libtoolize: copying file `m4/libtool.m4' [ 56s] libtoolize: copying file `m4/ltoptions.m4' [ 57s] libtoolize: copying file `m4/ltsugar.m4' [ 57s] libtoolize: copying file `m4/ltversion.m4' [ 57s] libtoolize: copying file `m4/lt~obsolete.m4' [ 76s] configure.ac:67: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 76s] configure.ac:67: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 76s] configure.ac:67: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 76s] Makefile.am: installing './COPYING' using GNU General Public License v3 file [ 76s] Makefile.am: Consider adding the COPYING file to the version control system [ 76s] Makefile.am: for your code, to avoid questions about which license your project uses [ 81s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 81s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 81s] automake: warning: possible forward-incompatibility. [ 81s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 81s] automake: automake option hasn't been enabled. For now, the corresponding output [ 81s] automake: object file(s) will be placed in the top-level directory. However, [ 81s] automake: this behaviour will change in future Automake versions: they will [ 81s] automake: unconditionally cause object files to be placed in the same subdirectory [ 81s] automake: of the corresponding sources. [ 81s] automake: You are advised to start using 'subdir-objects' option throughout your [ 81s] automake: project, to avoid future incompatibilities. [ 81s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 81s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 81s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_fips.c' is in a subdirectory, [ 81s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 81s] src/Makefile.am:76: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 81s] src/Makefile.am:76: but option 'subdir-objects' is disabled [ 81s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 81s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 81s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 81s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 82s] tests/Makefile.am:44: warning: source file '$(top_srcdir)/lib/utils_loop.c' is in a subdirectory, [ 82s] tests/Makefile.am:44: but option 'subdir-objects' is disabled [ 87s] Running ./configure --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib ... [ 87s] checking whether make supports nested variables... yes [ 87s] checking for a BSD-compatible install... /usr/bin/install -c [ 87s] checking whether build environment is sane... yes [ 87s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 87s] checking for gawk... gawk [ 87s] checking whether make sets $(MAKE)... yes [ 87s] checking build system type... armv7l-unknown-linux-gnueabi [ 87s] checking host system type... armv7l-unknown-linux-gnueabi [ 87s] checking for style of include used by make... GNU [ 87s] checking for gcc... gcc [ 87s] checking whether the C compiler works... yes [ 87s] checking for C compiler default output file name... a.out [ 87s] checking for suffix of executables... [ 87s] checking whether we are cross compiling... no [ 88s] checking for suffix of object files... o [ 88s] checking whether we are using the GNU C compiler... yes [ 88s] checking whether gcc accepts -g... yes [ 88s] checking for gcc option to accept ISO C89... none needed [ 88s] checking whether gcc understands -c and -o together... yes [ 88s] checking dependency style of gcc... gcc3 [ 88s] checking how to run the C preprocessor... gcc -E [ 88s] checking for grep that handles long lines and -e... /usr/bin/grep [ 88s] checking for egrep... /usr/bin/grep -E [ 88s] checking for ANSI C header files... yes [ 88s] checking for sys/types.h... yes [ 88s] checking for sys/stat.h... yes [ 88s] checking for stdlib.h... yes [ 88s] checking for string.h... yes [ 88s] checking for memory.h... yes [ 88s] checking for strings.h... yes [ 88s] checking for inttypes.h... yes [ 88s] checking for stdint.h... yes [ 88s] checking for unistd.h... yes [ 88s] checking minix/config.h usability... no [ 88s] checking minix/config.h presence... no [ 88s] checking for minix/config.h... no [ 88s] checking whether it is safe to define __EXTENSIONS__... yes [ 88s] checking for gcc... (cached) gcc [ 88s] checking whether we are using the GNU C compiler... (cached) yes [ 88s] checking whether gcc accepts -g... (cached) yes [ 88s] checking for gcc option to accept ISO C89... (cached) none needed [ 88s] checking whether gcc understands -c and -o together... (cached) yes [ 88s] checking dependency style of gcc... (cached) gcc3 [ 88s] checking how to run the C preprocessor... gcc -E [ 88s] checking whether make sets $(MAKE)... (cached) yes [ 88s] checking how to print strings... printf [ 88s] checking for a sed that does not truncate output... /usr/bin/sed [ 88s] checking for fgrep... /usr/bin/grep -F [ 88s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 88s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 88s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 88s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 88s] checking whether ln -s works... yes [ 88s] checking the maximum length of command line arguments... 1572864 [ 88s] checking whether the shell understands some XSI constructs... yes [ 88s] checking whether the shell understands "+="... yes [ 88s] checking how to convert armv7l-unknown-linux-gnueabi file names to armv7l-unknown-linux-gnueabi format... func_convert_file_noop [ 88s] checking how to convert armv7l-unknown-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 88s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 88s] checking for objdump... objdump [ 88s] checking how to recognize dependent libraries... pass_all [ 88s] checking for dlltool... no [ 88s] checking how to associate runtime and link libraries... printf %s\n [ 88s] checking for ar... ar [ 88s] checking for archiver @FILE support... @ [ 88s] checking for strip... strip [ 88s] checking for ranlib... ranlib [ 89s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 89s] checking for sysroot... no [ 89s] checking for mt... no [ 89s] checking if : is a manifest tool... no [ 89s] checking for dlfcn.h... yes [ 89s] checking for objdir... .libs [ 89s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 89s] checking for gcc option to produce PIC... -fPIC -DPIC [ 89s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 89s] checking if gcc static flag -static works... no [ 89s] checking if gcc supports -c -o file.o... yes [ 89s] checking if gcc supports -c -o file.o... (cached) yes [ 89s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 89s] checking whether -lc should be explicitly linked in... no [ 89s] checking dynamic linker characteristics... GNU/Linux ld.so [ 89s] checking how to hardcode library paths into programs... immediate [ 89s] checking whether stripping libraries is possible... yes [ 89s] checking if libtool supports shared libraries... yes [ 89s] checking whether to build shared libraries... yes [ 89s] checking whether to build static libraries... no [ 89s] checking for pkg-config... /usr/bin/pkg-config [ 89s] checking pkg-config is at least version 0.9.0... yes [ 89s] checking for dirent.h that defines DIR... yes [ 89s] checking for library containing opendir... none required [ 89s] checking for ANSI C header files... (cached) yes [ 89s] checking fcntl.h usability... yes [ 89s] checking fcntl.h presence... yes [ 89s] checking for fcntl.h... yes [ 89s] checking malloc.h usability... yes [ 89s] checking malloc.h presence... yes [ 89s] checking for malloc.h... yes [ 89s] checking for inttypes.h... (cached) yes [ 89s] checking sys/ioctl.h usability... yes [ 89s] checking sys/ioctl.h presence... yes [ 89s] checking for sys/ioctl.h... yes [ 89s] checking sys/mman.h usability... yes [ 89s] checking sys/mman.h presence... yes [ 89s] checking for sys/mman.h... yes [ 89s] checking ctype.h usability... yes [ 89s] checking ctype.h presence... yes [ 89s] checking for ctype.h... yes [ 89s] checking for unistd.h... (cached) yes [ 89s] checking locale.h usability... yes [ 89s] checking locale.h presence... yes [ 89s] checking for locale.h... yes [ 89s] checking byteswap.h usability... yes [ 89s] checking byteswap.h presence... yes [ 89s] checking for byteswap.h... yes [ 89s] checking endian.h usability... yes [ 89s] checking endian.h presence... yes [ 89s] checking for endian.h... yes [ 89s] checking uuid/uuid.h usability... yes [ 89s] checking uuid/uuid.h presence... yes [ 89s] checking for uuid/uuid.h... yes [ 89s] checking libdevmapper.h usability... yes [ 90s] checking libdevmapper.h presence... yes [ 90s] checking for libdevmapper.h... yes [ 90s] checking for uuid_clear in -luuid... yes [ 90s] checking for library containing clock_gettime... none required [ 90s] checking for posix_memalign... yes [ 90s] checking for clock_gettime... yes [ 90s] checking for an ANSI C-conforming const... yes [ 90s] checking whether byte ordering is bigendian... no [ 90s] checking for off_t... yes [ 90s] checking for special C compiler options needed for large files... no [ 90s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 90s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 90s] checking whether gcc needs -traditional... no [ 90s] checking whether strerror_r is declared... yes [ 90s] checking for strerror_r... yes [ 90s] checking whether strerror_r returns char *... yes [ 90s] checking whether NLS is requested... yes [ 90s] checking for msgfmt... /usr/bin/msgfmt [ 90s] checking for gmsgfmt... /usr/bin/msgfmt [ 90s] checking for xgettext... /usr/bin/xgettext [ 90s] checking for msgmerge... /usr/bin/msgmerge [ 90s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 90s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 90s] checking for shared library run path origin... done [ 90s] checking for CFPreferencesCopyAppValue... no [ 90s] checking for CFLocaleCopyCurrent... no [ 90s] checking for GNU gettext in libc... yes [ 90s] checking whether to use NLS... yes [ 90s] checking where the gettext function comes from... libc [ 90s] checking for poptConfigFileToString in -lpopt... yes [ 91s] checking for DEVMAPPER... yes [ 91s] checking whether dm_task_secure_data is declared... yes [ 91s] checking whether dm_task_retry_remove is declared... yes [ 91s] checking whether DM_UDEV_DISABLE_DISK_RULES_FLAG is declared... yes [ 91s] checking linux/if_alg.h usability... yes [ 91s] checking linux/if_alg.h presence... yes [ 91s] checking for linux/if_alg.h... yes [ 91s] checking for libgcrypt-config... /usr/bin/libgcrypt-config [ 91s] checking for LIBGCRYPT - version >= 1.6.1... yes (1.8.3) [ 91s] configure: WARNING: [ 91s] *** [ 91s] *** The config script /usr/bin/libgcrypt-config was [ 91s] *** built for armv7l-tizen-linux-gnueabi and thus may not match the [ 91s] *** used host armv7l-unknown-linux-gnueabi. [ 91s] *** You may want to use the configure option --with-libgcrypt-prefix [ 91s] *** to specify a matching config script or use $SYSROOT. [ 91s] *** [ 91s] checking for libgcrypt-config... (cached) /usr/bin/libgcrypt-config [ 91s] checking for LIBGCRYPT - version >= 1.1.42... yes (1.8.3) [ 91s] configure: WARNING: [ 91s] *** [ 91s] *** The config script /usr/bin/libgcrypt-config was [ 91s] *** built for armv7l-tizen-linux-gnueabi and thus may not match the [ 91s] *** used host armv7l-unknown-linux-gnueabi. [ 91s] *** You may want to use the configure option --with-libgcrypt-prefix [ 91s] *** to specify a matching config script or use $SYSROOT. [ 91s] *** [ 91s] checking if internal cryptsetup PBKDF2 is compiled-in... no [ 91s] checking that generated files are newer than configure... done [ 91s] configure: creating ./config.status [ 91s] config.status: creating Makefile [ 91s] config.status: creating lib/Makefile [ 91s] config.status: creating lib/libcryptsetup.pc [ 91s] config.status: creating lib/crypto_backend/Makefile [ 92s] config.status: creating lib/luks1/Makefile [ 92s] config.status: creating lib/loopaes/Makefile [ 92s] config.status: creating lib/verity/Makefile [ 92s] config.status: creating lib/tcrypt/Makefile [ 92s] config.status: creating src/Makefile [ 92s] config.status: creating po/Makefile.in [ 92s] config.status: creating man/Makefile [ 92s] config.status: creating tests/Makefile [ 92s] config.status: creating python/Makefile [ 92s] config.status: creating config.h [ 92s] config.status: executing depfiles commands [ 93s] config.status: executing libtool commands [ 93s] config.status: executing po-directories commands [ 93s] config.status: creating po/POTFILES [ 93s] config.status: creating po/Makefile [ 93s] Now type `make' to compile cryptsetup [ 93s] + make -j8 [ 93s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/missing autoheader) [ 96s] rm -f stamp-h1 [ 96s] touch config.h.in [ 96s] cd . && /bin/sh ./config.status config.h [ 96s] config.status: creating config.h [ 96s] config.status: config.h is unchanged [ 96s] make all-recursive [ 96s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 96s] Making all in lib [ 96s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 96s] Making all in crypto_backend [ 96s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 96s] CC libcrypto_backend_la-crypto_cipher_kernel.lo [ 96s] CC libcrypto_backend_la-crypto_storage.lo [ 96s] CC libcrypto_backend_la-pbkdf_check.lo [ 96s] CC libcrypto_backend_la-crc32.lo [ 96s] CC libcrypto_backend_la-crypto_gcrypt.lo [ 96s] CCLD libcrypto_backend.la [ 96s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 96s] Making all in luks1 [ 96s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 96s] CC libluks1_la-af.lo [ 96s] CC libluks1_la-keymanage.lo [ 96s] CC libluks1_la-keyencryption.lo [ 97s] CCLD libluks1.la [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 97s] Making all in loopaes [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 97s] CC libloopaes_la-loopaes.lo [ 97s] CCLD libloopaes.la [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 97s] Making all in verity [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 97s] CC libverity_la-verity_hash.lo [ 97s] CC libverity_la-verity.lo [ 97s] CCLD libverity.la [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 97s] Making all in tcrypt [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 97s] CC libtcrypt_la-tcrypt.lo [ 98s] CCLD libtcrypt.la [ 98s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 98s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 98s] CC libcryptsetup_la-setup.lo [ 98s] CC libcryptsetup_la-utils.lo [ 98s] CC libcryptsetup_la-utils_crypt.lo [ 98s] CC libcryptsetup_la-utils_benchmark.lo [ 98s] CC libcryptsetup_la-utils_loop.lo [ 98s] CC libcryptsetup_la-utils_devpath.lo [ 98s] CC libcryptsetup_la-utils_fips.lo [ 98s] CC libcryptsetup_la-utils_wipe.lo [ 98s] CC libcryptsetup_la-utils_device.lo [ 98s] CC libcryptsetup_la-libdevmapper.lo [ 98s] CC libcryptsetup_la-volumekey.lo [ 98s] CC libcryptsetup_la-random.lo [ 98s] CC libcryptsetup_la-crypt_plain.lo [ 99s] CCLD libcryptsetup.la [ 99s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 99s] Making all in src [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 99s] CC cryptsetup-utils_crypt.o [ 99s] CC cryptsetup-utils_loop.o [ 99s] CC cryptsetup-utils_password.o [ 99s] CC cryptsetup-cryptsetup.o [ 99s] CC cryptsetup-utils_fips.o [ 99s] CC veritysetup-utils_crypt.o [ 99s] CC veritysetup-utils_loop.o [ 99s] CC cryptsetup-utils_tools.o [ 99s] CC veritysetup-utils_tools.o [ 99s] CC veritysetup-veritysetup.o [ 99s] CCLD veritysetup [ 100s] CCLD cryptsetup [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 100s] Making all in man [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 100s] make[2]: Nothing to be done for 'all'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 100s] Making all in python [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 100s] make[2]: Nothing to be done for 'all'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 100s] Making all in tests [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 100s] make[2]: Nothing to be done for 'all'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 100s] Making all in po [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 100s] make[2]: Nothing to be done for 'all'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 100s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 100s] + exit 0 [ 100s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JdX0Mw [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd cryptsetup-1.6.7 [ 100s] + LANG=C [ 100s] + export LANG [ 100s] + unset DISPLAY [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 100s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 100s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm install [ 100s] Making install in lib [ 100s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] Making install in crypto_backend [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 100s] make[3]: Nothing to be done for 'install-exec-am'. [ 100s] make[3]: Nothing to be done for 'install-data-am'. [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 100s] Making install in luks1 [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 100s] make[3]: Nothing to be done for 'install-exec-am'. [ 100s] make[3]: Nothing to be done for 'install-data-am'. [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 100s] Making install in loopaes [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 100s] make[3]: Nothing to be done for 'install-exec-am'. [ 100s] make[3]: Nothing to be done for 'install-data-am'. [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 100s] Making install in verity [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 100s] make[3]: Nothing to be done for 'install-exec-am'. [ 100s] make[3]: Nothing to be done for 'install-data-am'. [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 100s] Making install in tcrypt [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 100s] make[3]: Nothing to be done for 'install-exec-am'. [ 100s] make[3]: Nothing to be done for 'install-data-am'. [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib' [ 100s] /bin/sh ../libtool --mode=install /usr/bin/install -c libcryptsetup.la '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib' [ 100s] libtool: install: /usr/bin/install -c .libs/libcryptsetup.so.4.7.0 /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/libcryptsetup.so.4.7.0 [ 100s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so.4 || { rm -f libcryptsetup.so.4 && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so.4; }; }) [ 100s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so || { rm -f libcryptsetup.so && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so; }; }) [ 100s] libtool: install: /usr/bin/install -c .libs/libcryptsetup.lai /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/libcryptsetup.la [ 100s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 100s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/include' [ 100s] /usr/bin/install -c -m 644 libcryptsetup.h '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/include' [ 100s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/pkgconfig' [ 100s] /usr/bin/install -c -m 644 libcryptsetup.pc '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/pkgconfig' [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] Making install in src [ 100s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 100s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin' [ 100s] /bin/sh ../libtool --mode=install /usr/bin/install -c cryptsetup veritysetup '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin' [ 100s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib' [ 100s] libtool: install: /usr/bin/install -c .libs/cryptsetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/cryptsetup [ 100s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib' [ 100s] libtool: install: /usr/bin/install -c .libs/veritysetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/veritysetup [ 100s] make[2]: Nothing to be done for 'install-data-am'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 100s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 100s] Making install in man [ 100s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 100s] make[2]: Nothing to be done for 'install-exec-am'. [ 100s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/man/man8' [ 100s] /usr/bin/install -c -m 644 cryptsetup.8 veritysetup.8 '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/man/man8' [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 100s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 100s] Making install in python [ 100s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 100s] make[2]: Nothing to be done for 'install-data-am'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 100s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 100s] Making install in tests [ 100s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 100s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 100s] make[2]: Nothing to be done for 'install-exec-am'. [ 100s] make[2]: Nothing to be done for 'install-data-am'. [ 100s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 100s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 100s] Making install in po [ 100s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 100s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share [ 100s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/cs/LC_MESSAGES/cryptsetup.mo [ 100s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/de/LC_MESSAGES/cryptsetup.mo [ 100s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/es/LC_MESSAGES/cryptsetup.mo [ 100s] installing fi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/fi/LC_MESSAGES/cryptsetup.mo [ 100s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/fr/LC_MESSAGES/cryptsetup.mo [ 100s] installing id.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/id/LC_MESSAGES/cryptsetup.mo [ 100s] installing it.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/it/LC_MESSAGES/cryptsetup.mo [ 100s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/nl/LC_MESSAGES/cryptsetup.mo [ 100s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/pl/LC_MESSAGES/cryptsetup.mo [ 100s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo [ 100s] installing uk.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/uk/LC_MESSAGES/cryptsetup.mo [ 101s] installing vi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/locale/vi/LC_MESSAGES/cryptsetup.mo [ 101s] if test "cryptsetup" = "gettext-tools"; then \ [ 101s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/gettext/po; \ [ 101s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 101s] /usr/bin/install -c -m 644 ./$file \ [ 101s] /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/gettext/po/$file; \ [ 101s] done; \ [ 101s] for file in Makevars; do \ [ 101s] rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/gettext/po/$file; \ [ 101s] done; \ [ 101s] else \ [ 101s] : ; \ [ 101s] fi [ 101s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 101s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 101s] make[2]: Nothing to be done for 'install-exec-am'. [ 101s] make[2]: Nothing to be done for 'install-data-am'. [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 101s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 101s] + rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/info/dir [ 101s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm -regex '.*\.la$' [ 101s] + xargs rm -f -- [ 101s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm -regex '.*\.a$' [ 101s] + xargs rm -f -- [ 101s] + cp -a /home/abuild/rpmbuild/SOURCES/cryptsetup.manifest /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/binary_package_name.manifest [ 101s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7 [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/lib/libcryptsetup.so.4.7.0 [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/cryptsetup [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/sbin/veritysetup [ 101s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 101s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 101s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 101s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 101s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 101s] 858 blocks [ 101s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/cryptsetup-debuginfo.manifest [ 101s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/cryptsetup-debugsource.manifest [ 101s] + /usr/lib/rpm/check-buildroot [ 101s] + /usr/lib/rpm//brp-compress [ 101s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 102s] + /usr/lib/rpm/brp-python-hardlink [ 102s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 102s] Processing files: cryptsetup-1.6.7-1.1.armv7l [ 102s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 102s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0PgoK [ 102s] [ 102s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.8YG9Uh [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd cryptsetup-1.6.7 [ 102s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup [ 102s] + export LICENSEDIR [ 102s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup [ 102s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup [ 102s] + exit 0 [ 102s] Provides: cryptsetup = 1.6.7-1.1 cryptsetup(armv7l-32) = 1.6.7-1.1 libcryptsetup.so.4 libcryptsetup.so.4(CRYPTSETUP_1.0) [ 102s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 102s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 102s] Requires(post): /sbin/ldconfig [ 102s] Requires(postun): /sbin/ldconfig [ 102s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libcryptsetup.so.4 libcryptsetup.so.4(CRYPTSETUP_1.0) libdevmapper.so.1.02 libdevmapper.so.1.02(Base) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libpopt.so.0 libpopt.so.0(LIBPOPT_0) libuuid.so.1 libuuid.so.1(UUID_1.0) rtld(GNU_HASH) [ 102s] Processing files: cryptsetup-debugsource-1.6.7-1.1.armv7l [ 102s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 102s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 102s] [ 102s] Provides: cryptsetup-debugsource = 1.6.7-1.1 cryptsetup-debugsource(armv7l-32) = 1.6.7-1.1 [ 102s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 102s] Processing files: cryptsetup-devel-1.6.7-1.1.armv7l [ 102s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.JCdec3 [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd cryptsetup-1.6.7 [ 102s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-devel [ 102s] + export LICENSEDIR [ 102s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-devel [ 102s] + cp -pr COPYING.LGPL-2.1+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-devel [ 102s] + exit 0 [ 102s] Provides: cryptsetup-devel = 1.6.7-1.1 cryptsetup-devel(armv7l-32) = 1.6.7-1.1 pkgconfig(libcryptsetup) = 1.6.7 [ 102s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 102s] Requires: /usr/bin/pkg-config libcryptsetup.so.4 [ 102s] Processing files: cryptsetup-locale-1.6.7-1.1.armv7l [ 102s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.NwtMWO [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd cryptsetup-1.6.7 [ 102s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-locale [ 102s] + export LICENSEDIR [ 102s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-locale [ 102s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-locale [ 102s] + exit 0 [ 102s] Provides: cryptsetup-locale = 1.6.7-1.1 cryptsetup-locale(armv7l-32) = 1.6.7-1.1 [ 102s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 102s] Processing files: cryptsetup-doc-1.6.7-1.1.armv7l [ 102s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TzYUMA [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd cryptsetup-1.6.7 [ 102s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-doc [ 102s] + export LICENSEDIR [ 102s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-doc [ 102s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm/usr/share/licenses/cryptsetup-doc [ 102s] + exit 0 [ 102s] Provides: cryptsetup-doc = 1.6.7-1.1 cryptsetup-doc(armv7l-32) = 1.6.7-1.1 [ 102s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 102s] Processing files: cryptsetup-debuginfo-1.6.7-1.1.armv7l [ 102s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 102s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 102s] [ 102s] warning: File listed twice: /usr/lib/debug/.build-id [ 102s] warning: File listed twice: /usr/lib/debug/.build-id [ 102s] Provides: cryptsetup-debuginfo = 1.6.7-1.1 cryptsetup-debuginfo(armv7l-32) = 1.6.7-1.1 [ 102s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 102s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 102s] warning: Could not canonicalize hostname: obspw08 [ 102s] Wrote: /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-1.1.src.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-1.6.7-1.1.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debugsource-1.6.7-1.1.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-devel-1.6.7-1.1.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-locale-1.6.7-1.1.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-doc-1.6.7-1.1.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debuginfo-1.6.7-1.1.armv7l.rpm [ 103s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.a0noNU [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd cryptsetup-1.6.7 [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-1.1.arm [ 103s] + exit 0 [ 103s] ... checking for files with abuild user/group [ 103s] ... creating baselibs [ 103s] [ 103s] obspw08 finished "build cryptsetup.spec" at Thu Oct 31 11:58:12 UTC 2019. [ 103s] Retried build at Sat Nov 9 01:39:02 2019 returned same result, skipped Retried build at Wed Nov 13 12:45:17 2019 returned same result, skipped Retried build at Tue Dec 10 04:17:56 2019 returned same result, skipped Retried build at Thu Dec 12 08:25:10 2019 returned same result, skipped Retried build at Fri Jan 10 09:08:10 2020 returned same result, skipped Retried build at Thu Feb 6 06:10:37 2020 returned same result, skipped Retried build at Tue Feb 18 15:19:21 2020 returned same result, skipped Retried build at Tue Mar 31 18:26:23 2020 returned same result, skipped Retried build at Fri Apr 3 16:46:43 2020 returned same result, skipped Retried build at Fri Apr 10 16:39:58 2020 returned same result, skipped Retried build at Mon Apr 27 10:12:55 2020 returned same result, skipped Retried build at Fri May 8 18:32:16 2020 returned same result, skipped