[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw26 started "build _service:gbs:libexynos-common.spec" at Thu Oct 31 11:35:10 UTC 2019. [ 0s] [ 0s] Building libexynos-common for project 'Tizen:5.5:Unified' repository 'standard' arch 'armv7l' srcmd5 '0558c19d101c795c630e970089b367fa' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:libexynos-common.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:libexynos-common.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:libexynos-common.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libelf... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/99] installing dlog-config-persistent-logs-5.5.1-1.5 [ 8s] [2/99] installing kernel-headers-exynos7270-tw2-3.18.14-1.6 [ 9s] [3/99] installing libmagic-data-5.37-1.46 [ 9s] [4/99] installing setup-0.9-1.2 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [5/99] installing filesystem-3.1-1.1 [ 9s] [6/99] installing glibc-2.24-1.22 [ 9s] [7/99] installing glibc-devel-2.24-1.22 [ 10s] [8/99] installing libatomic-6.2.1-1.3 [ 10s] [9/99] installing libgcc-6.2.1-1.3 [ 10s] [10/99] installing bash-3.2.57-1.1 [ 10s] [11/99] installing binutils-2.27-1.28 [ 11s] [12/99] installing capi-base-common-0.4.54-1.1 [ 11s] [13/99] installing cpio-2.11-1.1 [ 11s] [14/99] installing diffutils-3.3-1.1 [ 11s] [15/99] installing findutils-4.3.8-1.70 [ 11s] [16/99] installing gdbm-1.8.3-1.74 [ 11s] [17/99] installing hostname-3.20-1.1 [ 11s] [18/99] installing libattr-2.4.47-1.76 [ 12s] [19/99] installing libbz2-1.0.6-1.63 [ 12s] [20/99] installing libcap-2.24-1.75 [ 12s] [21/99] installing libelf-0.153-1.9 [ 13s] [22/99] installing libext2fs-1.43.4-1.1 [ 13s] [23/99] installing libfreebl3-3.34.1-1.42 [ 13s] [24/99] installing libgomp-6.2.1-1.3 [ 14s] [25/99] installing libitm-6.2.1-1.3 [ 14s] [26/99] installing libltdl-2.4.2-1.55 [ 14s] [27/99] installing liblua-5.1.5-1.2 [ 15s] [28/99] installing liblzma-5.2.4-1.53 [ 15s] [29/99] installing libpcre-8.43-1.3 [ 15s] [30/99] installing libpopt-1.16-1.4 [ 16s] [31/99] installing libsmack-1.3.1-1.2 [ 16s] [32/99] installing libsmartcols-2.30-1.1 [ 16s] [33/99] installing libsqlite-3.29.0-1.28 [ 17s] [34/99] installing libstdc++-6.2.1-1.3 [ 17s] [35/99] installing libuuid-2.30-1.1 [ 17s] [36/99] installing m4-1.4.17-1.1 [ 17s] [37/99] installing net-tools-2.0_20121208git-1.1 [ 17s] [38/99] installing nspr-4.12-1.2 [ 18s] [39/99] installing patch-2.7-1.4 [ 18s] [40/99] installing pkg-config-0.28-1.66 [ 18s] [41/99] installing sed-4.1c-1.1 [ 18s] [42/99] installing update-alternatives-1.18.15-1.1 [ 18s] [43/99] installing which-2.20-1.1 [ 18s] [44/99] installing zlib-1.2.11-1.73 [ 18s] [45/99] installing build-compare-2015.04.28-1.17 [ 18s] [46/99] installing libstdc++-devel-6.2.1-1.3 [ 19s] [47/99] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 20s] [48/99] installing terminfo-base-full-6.1-1.40 [ 20s] [49/99] installing capi-base-common-devel-0.4.54-1.1 [ 20s] [50/99] installing cpp-6.2.1-1.3 [ 21s] [51/99] installing gcc-c++-6.2.1-1.3 [ 22s] [52/99] installing coreutils-6.9-1.5 [ 22s] [53/99] installing db4-4.8.30.NC-1.67 [ 22s] [54/99] installing gawk-3.1.5-1.1 [ 22s] [55/99] installing grep-2.5.2-1.1 [ 22s] [56/99] installing libacl-2.2.52-1.76 [ 22s] [57/99] installing libasm-0.153-1.9 [ 23s] [58/99] installing libblkid-2.30-1.1 [ 23s] [59/99] installing libcc1-6.2.1-1.3 [ 23s] [60/99] installing libgfortran-6.2.1-1.3 [ 23s] [61/99] installing libubsan-6.2.1-1.3 [ 24s] [62/99] installing make-4.0-1.7 [ 24s] [63/99] installing nss-certs-3.34.1-1.42 [ 24s] [64/99] installing smack-1.3.1-1.2 [ 24s] [65/99] installing bzip2-1.0.6-1.63 [ 24s] [66/99] installing libmagic-5.37-1.46 [ 25s] [67/99] installing libxml2-2.9.7-1.23 [ 25s] [68/99] installing xz-5.2.4-1.53 [ 25s] [69/99] installing libdw-0.153-1.9 [ 25s] [70/99] installing file-5.37-1.46 [ 25s] [71/99] installing glibc-locale-2.24-1.22 [ 26s] [72/99] installing libmount-2.30-1.1 [ 26s] [73/99] installing tar-1.17-1.1 [ 26s] [74/99] installing gzip-1.3.12-1.77 [ 26s] [75/99] installing libfdisk-2.30-1.1 [ 27s] [76/99] installing libncurses6-6.1-1.40 [ 27s] [77/99] installing pam-1.1.6-1.1 [ 27s] [78/99] installing perl-5.30.0-1.10 [ 29s] [79/99] installing tzdata-2019a-1.1 [ 30s] [80/99] installing libdlog-5.5.1-1.5 [ 30s] /var/tmp/rpm-tmp.Qx1Pq6: line 2: systemctl: command not found [ 30s] [81/99] installing elfutils-0.153-1.9 [ 30s] [82/99] installing gcc-6.2.1-1.3 [ 31s] [83/99] installing build-mkbaselibs-20120927-1.1 [ 31s] [84/99] installing libncurses-6.1-1.40 [ 31s] [85/99] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 40s] [86/99] installing autoconf-2.69-1.25 [ 40s] [87/99] installing less-466-1.1 [ 40s] [88/99] installing libdlog-devel-5.5.1-1.5 [ 40s] [89/99] installing libreadline-5.2-1.24 [ 40s] [90/99] installing procps-ng-3.3.15-1.1 [ 41s] [91/99] installing automake-1.15.1-1.46 [ 41s] [92/99] installing build-20120927-1.1 [ 41s] [93/99] installing util-linux-2.30-1.1 [ 41s] [94/99] installing libtool-2.4.2-1.55 [ 41s] [95/99] installing util-linux-su-2.30-1.1 [ 41s] [96/99] installing nss-3.34.1-1.42 [ 42s] [97/99] installing libsoftokn3-3.34.1-1.42 [ 42s] [98/99] installing rpm-4.11.0.1-1.32 [ 42s] [99/99] installing rpm-build-4.11.0.1-1.32 [ 42s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 43s] Running build time source services... [ 43s] build target is armv7l-tizen-linux [ 43s] ----------------------------------------------------------------- [ 43s] I have the following modifications for libexynos-common.spec: [ 43s] 7c7 [ 43s] < Release: 0 [ 43s] --- [ 43s] > Release: 1.1 [ 43s] ----------------------------------------------------------------- [ 43s] ----- building libexynos-common.spec (user abuild) [ 43s] ----------------------------------------------------------------- [ 43s] ----------------------------------------------------------------- [ 43s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified/standard/0558c19d101c795c630e970089b367fa-libexynos-common' -ba /home/abuild/rpmbuild/SOURCES/libexynos-common.spec [ 43s] Building target platforms: armv7l-tizen-linux [ 43s] Building for target armv7l-tizen-linux [ 43s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.YFvBp7 [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + rm -rf libexynos-common-0.0.1 [ 43s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libexynos-common-0.0.1.tar.gz [ 43s] + /bin/tar -xf - [ 43s] + STATUS=0 [ 43s] + '[' 0 -ne 0 ']' [ 43s] + cd libexynos-common-0.0.1 [ 43s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 43s] + exit 0 [ 43s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.5XRyh5 [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd libexynos-common-0.0.1 [ 43s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LDFLAGS= [ 43s] + export LDFLAGS [ 43s] + ./autogen.sh [ 46s] autoreconf: Entering directory `.' [ 46s] autoreconf: configure.ac: not using Gettext [ 47s] autoreconf: running: aclocal --force [ 53s] autoreconf: configure.ac: tracing [ 55s] autoreconf: running: libtoolize --copy --force [ 55s] libtoolize: putting auxiliary files in `.'. [ 55s] libtoolize: copying file `./ltmain.sh' [ 56s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 56s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 56s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 61s] autoreconf: running: /usr/bin/autoconf --force [ 67s] autoreconf: running: /usr/bin/autoheader --force [ 70s] autoreconf: running: automake --add-missing --copy --force-missing [ 74s] configure.ac:13: installing './compile' [ 74s] configure.ac:24: installing './config.guess' [ 74s] configure.ac:24: installing './config.sub' [ 74s] configure.ac:9: installing './install-sh' [ 74s] configure.ac:9: installing './missing' [ 74s] libcsc/Makefile.am: installing './depcomp' [ 77s] autoreconf: Leaving directory `.' [ 78s] checking for a BSD-compatible install... /bin/install -c [ 78s] checking whether build environment is sane... yes [ 78s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 78s] checking for gawk... gawk [ 78s] checking whether make sets $(MAKE)... yes [ 78s] checking whether make supports nested variables... yes [ 78s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 78s] ./configure: line 3069: i: command not found [ 78s] checking for style of include used by make... GNU [ 78s] checking for gcc... gcc [ 78s] checking whether the C compiler works... yes [ 78s] checking for C compiler default output file name... a.out [ 78s] checking for suffix of executables... [ 78s] checking whether we are cross compiling... no [ 78s] checking for suffix of object files... o [ 78s] checking whether we are using the GNU C compiler... yes [ 78s] checking whether gcc accepts -g... yes [ 78s] checking for gcc option to accept ISO C89... none needed [ 78s] checking whether gcc understands -c and -o together... yes [ 79s] checking dependency style of gcc... gcc3 [ 79s] checking dependency style of gcc... gcc3 [ 79s] checking for gcc... (cached) gcc [ 79s] checking whether we are using the GNU C compiler... (cached) yes [ 79s] checking whether gcc accepts -g... (cached) yes [ 79s] checking for gcc option to accept ISO C89... (cached) none needed [ 79s] checking whether gcc understands -c and -o together... (cached) yes [ 79s] checking dependency style of gcc... (cached) gcc3 [ 79s] checking for g++... g++ [ 79s] checking whether we are using the GNU C++ compiler... yes [ 79s] checking whether g++ accepts -g... yes [ 79s] checking dependency style of g++... gcc3 [ 79s] checking how to run the C preprocessor... gcc -E [ 79s] checking for grep that handles long lines and -e... /bin/grep [ 79s] checking for egrep... /bin/grep -E [ 79s] checking for ANSI C header files... yes [ 79s] checking for sys/types.h... yes [ 79s] checking for sys/stat.h... yes [ 79s] checking for stdlib.h... yes [ 79s] checking for string.h... yes [ 79s] checking for memory.h... yes [ 79s] checking for strings.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for unistd.h... yes [ 80s] checking minix/config.h usability... no [ 80s] checking minix/config.h presence... no [ 80s] checking for minix/config.h... no [ 80s] checking whether it is safe to define __EXTENSIONS__... yes [ 80s] checking for special C compiler options needed for large files... no [ 80s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 80s] checking for size_t... yes [ 80s] checking for working alloca.h... yes [ 80s] checking for alloca... yes [ 80s] checking build system type... armv7l-tizen-linux-gnueabi [ 80s] checking host system type... armv7l-tizen-linux-gnueabi [ 80s] checking how to print strings... printf [ 80s] checking for a sed that does not truncate output... /bin/sed [ 80s] checking for fgrep... /bin/grep -F [ 80s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 80s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 80s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 80s] checking the name lister (/bin/nm -B) interface... BSD nm [ 80s] checking whether ln -s works... yes [ 80s] checking the maximum length of command line arguments... 1572864 [ 80s] checking whether the shell understands some XSI constructs... yes [ 80s] checking whether the shell understands "+="... yes [ 80s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 80s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 80s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 80s] checking for objdump... objdump [ 80s] checking how to recognize dependent libraries... pass_all [ 80s] checking for dlltool... no [ 80s] checking how to associate runtime and link libraries... printf %s\n [ 80s] checking for ar... ar [ 80s] checking for archiver @FILE support... @ [ 80s] checking for strip... strip [ 80s] checking for ranlib... ranlib [ 80s] checking command to parse /bin/nm -B output from gcc object... ok [ 81s] checking for sysroot... no [ 81s] checking for mt... no [ 81s] checking if : is a manifest tool... no [ 81s] checking for dlfcn.h... yes [ 81s] checking for objdir... .libs [ 81s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 81s] checking for gcc option to produce PIC... -fPIC -DPIC [ 81s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 81s] checking if gcc static flag -static works... no [ 81s] checking if gcc supports -c -o file.o... yes [ 81s] checking if gcc supports -c -o file.o... (cached) yes [ 81s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking whether -lc should be explicitly linked in... no [ 81s] checking dynamic linker characteristics... GNU/Linux ld.so [ 81s] checking how to hardcode library paths into programs... immediate [ 81s] checking whether stripping libraries is possible... yes [ 81s] checking if libtool supports shared libraries... yes [ 81s] checking whether to build shared libraries... yes [ 81s] checking whether to build static libraries... no [ 81s] checking how to run the C++ preprocessor... g++ -E [ 81s] checking for ld used by g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 81s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 81s] checking whether the g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking for g++ option to produce PIC... -fPIC -DPIC [ 81s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 81s] checking if g++ static flag -static works... no [ 81s] checking if g++ supports -c -o file.o... yes [ 81s] checking if g++ supports -c -o file.o... (cached) yes [ 81s] checking whether the g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 81s] checking how to hardcode library paths into programs... immediate [ 81s] checking whether make supports nested variables... (cached) yes [ 81s] checking that generated files are newer than configure... done [ 81s] configure: creating ./config.status [ 82s] config.status: creating Makefile [ 82s] config.status: creating libv4l2/Makefile [ 82s] config.status: creating libswconverter/Makefile [ 82s] config.status: creating libcsc/Makefile [ 82s] config.status: creating libgscaler/Makefile [ 82s] config.status: creating libion/Makefile [ 83s] config.status: creating config.h [ 83s] config.status: executing depfiles commands [ 83s] config.status: executing libtool commands [ 83s] [ 83s] libexynos 1.0.0 will be compiled with: [ 83s] [ 83s] [ 84s] + export 'CFLAGS+= -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 84s] + CFLAGS+=' -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 84s] + LDFLAGS+='-Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed' [ 84s] + export LDFLAGS [ 84s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 84s] + export CFLAGS [ 84s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 84s] + export CXXFLAGS [ 84s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 84s] + export FFLAGS [ 84s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static --enable-dlog [ 84s] checking for a BSD-compatible install... /bin/install -c [ 84s] checking whether build environment is sane... yes [ 84s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 84s] checking for gawk... gawk [ 84s] checking whether make sets $(MAKE)... yes [ 84s] checking whether make supports nested variables... yes [ 84s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 84s] ./configure: line 3069: i: command not found [ 84s] checking for style of include used by make... GNU [ 84s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 84s] checking whether the C compiler works... yes [ 84s] checking for C compiler default output file name... a.out [ 84s] checking for suffix of executables... [ 84s] checking whether we are cross compiling... no [ 84s] checking for suffix of object files... o [ 84s] checking whether we are using the GNU C compiler... yes [ 84s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 84s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 85s] checking whether we are using the GNU C compiler... (cached) yes [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 85s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 85s] checking whether we are using the GNU C++ compiler... yes [ 85s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 85s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 85s] checking for grep that handles long lines and -e... /bin/grep [ 85s] checking for egrep... /bin/grep -E [ 85s] checking for ANSI C header files... yes [ 85s] checking for sys/types.h... yes [ 85s] checking for sys/stat.h... yes [ 85s] checking for stdlib.h... yes [ 85s] checking for string.h... yes [ 85s] checking for memory.h... yes [ 85s] checking for strings.h... yes [ 85s] checking for inttypes.h... yes [ 86s] checking for stdint.h... yes [ 86s] checking for unistd.h... yes [ 86s] checking minix/config.h usability... no [ 86s] checking minix/config.h presence... no [ 86s] checking for minix/config.h... no [ 86s] checking whether it is safe to define __EXTENSIONS__... yes [ 86s] checking for special C compiler options needed for large files... no [ 86s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 86s] checking for size_t... yes [ 86s] checking for working alloca.h... yes [ 86s] checking for alloca... yes [ 86s] checking build system type... armv7l-tizen-linux-gnueabi [ 86s] checking host system type... armv7l-tizen-linux-gnueabi [ 86s] checking how to print strings... printf [ 86s] checking for a sed that does not truncate output... /bin/sed [ 86s] checking for fgrep... /bin/grep -F [ 86s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 86s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 86s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 86s] checking the name lister (/bin/nm -B) interface... BSD nm [ 86s] checking whether ln -s works... yes [ 86s] checking the maximum length of command line arguments... 1572864 [ 86s] checking whether the shell understands some XSI constructs... yes [ 86s] checking whether the shell understands "+="... yes [ 86s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 86s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 86s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 86s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 86s] checking for objdump... objdump [ 86s] checking how to recognize dependent libraries... pass_all [ 86s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 86s] checking for dlltool... no [ 86s] checking how to associate runtime and link libraries... printf %s\n [ 86s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 86s] checking for ar... ar [ 86s] checking for archiver @FILE support... @ [ 86s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 86s] checking for strip... strip [ 86s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 86s] checking for ranlib... ranlib [ 86s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 86s] checking for sysroot... no [ 86s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 86s] checking for mt... no [ 86s] checking if : is a manifest tool... no [ 86s] checking for dlfcn.h... yes [ 86s] checking for objdir... .libs [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking whether -lc should be explicitly linked in... no [ 87s] checking dynamic linker characteristics... GNU/Linux ld.so [ 87s] checking how to hardcode library paths into programs... immediate [ 87s] checking whether stripping libraries is possible... yes [ 87s] checking if libtool supports shared libraries... yes [ 87s] checking whether to build shared libraries... yes [ 87s] checking whether to build static libraries... no [ 87s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 87s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 87s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 87s] checking how to hardcode library paths into programs... immediate [ 87s] checking whether make supports nested variables... (cached) yes [ 87s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 87s] checking pkg-config is at least version 0.9.0... yes [ 87s] checking for DLOG... yes [ 87s] checking that generated files are newer than configure... done [ 87s] configure: creating ./config.status [ 88s] config.status: creating Makefile [ 88s] config.status: creating libv4l2/Makefile [ 88s] config.status: creating libswconverter/Makefile [ 88s] config.status: creating libcsc/Makefile [ 88s] config.status: creating libgscaler/Makefile [ 88s] config.status: creating libion/Makefile [ 88s] config.status: creating config.h [ 88s] config.status: config.h is unchanged [ 88s] config.status: executing depfiles commands [ 89s] config.status: executing libtool commands [ 89s] [ 89s] libexynos 1.0.0 will be compiled with: [ 89s] [ 89s] [ 89s] + make [ 89s] make all-recursive [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 89s] Making all in libion [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 89s] CC libion_la-ion.lo [ 89s] CCLD libion.la [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 89s] Making all in libv4l2 [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 89s] CC libexynosv4l2_la-exynos_v4l2.lo [ 90s] CC libexynosv4l2_la-exynos_subdev.lo [ 90s] CC libexynosv4l2_la-exynos_mc.lo [ 90s] CCLD libexynosv4l2.la [ 90s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 90s] Making all in libswconverter [ 90s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 90s] CC libswconverter_la-swconvertor.lo [ 90s] CCAS libswconverter_la-csc_BGRA8888_to_RGBA8888_NEON.lo [ 90s] CCAS libswconverter_la-csc_BGRA8888_to_YUV420SP_NEON.lo [ 90s] CCAS libswconverter_la-csc_RGBA8888_to_YUV420SP_NEON.lo [ 90s] CCAS libswconverter_la-csc_interleave_memcpy_neon.lo [ 91s] CCAS libswconverter_la-csc_linear_to_tiled_crop_neon.lo [ 91s] CCAS libswconverter_la-csc_linear_to_tiled_interleave_crop_neon.lo [ 91s] CCAS libswconverter_la-csc_tiled_to_linear_crop_neon.lo [ 91s] CCAS libswconverter_la-csc_tiled_to_linear_deinterleave_crop_neon.lo [ 91s] CCAS libswconverter_la-csc_tiled_to_linear_uv_deinterleave_neon.lo [ 91s] CCAS libswconverter_la-csc_tiled_to_linear_uv_neon.lo [ 91s] CCAS libswconverter_la-csc_tiled_to_linear_y_neon.lo [ 91s] CCLD libswconverter.la [ 91s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 91s] Making all in libcsc [ 91s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 91s] CC libcsc_la-csc.lo [ 91s] CCLD libcsc.la [ 91s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 91s] Making all in libgscaler [ 91s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 91s] CXX libexynosgscaler_la-libgscaler_obj.lo [ 92s] CXX libexynosgscaler_la-libgscaler.lo [ 92s] CXXLD libexynosgscaler.la [ 92s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 92s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 92s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 92s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 92s] + exit 0 [ 92s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.1aP7S1 [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd libexynos-common-0.0.1 [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include/linux [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include/system [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/pkgconfig [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/libion/include/ion/ [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/libion/kernel-headers/linux [ 92s] + install -m0644 include/content_protect.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/csc.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/exynos_format.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/exynos_gscaler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/exynos_ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/exynos_log.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/exynos_scaler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/exynos_v4l2.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 92s] + install -m0644 include/media.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 93s] + install -m0644 include/swconverter.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include [ 93s] + install -m0644 include/linux/compiler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include/linux [ 93s] + install -m0644 include/system/graphics.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/include/system [ 93s] + install -m0644 libion/include/ion/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/libion/include/ion/ [ 93s] + install -m0644 libion/kernel-headers/linux/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/libion/kernel-headers/linux [ 93s] + install exynos-common.pc /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/pkgconfig/ [ 93s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm install [ 93s] Making install in libion [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 93s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] /bin/sh ../libtool --mode=install /bin/install -c libion.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] libtool: install: /bin/install -c .libs/libion.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libion.so.0.0.0 [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libion.so.0.0.0 libion.so.0 || { rm -f libion.so.0 && ln -s libion.so.0.0.0 libion.so.0; }; }) [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libion.so.0.0.0 libion.so || { rm -f libion.so && ln -s libion.so.0.0.0 libion.so; }; }) [ 93s] libtool: install: /bin/install -c .libs/libion.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libion.la [ 93s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 93s] make[2]: Nothing to be done for 'install-data-am'. [ 93s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 93s] Making install in libv4l2 [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 93s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] /bin/sh ../libtool --mode=install /bin/install -c libexynosv4l2.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] libtool: install: /bin/install -c .libs/libexynosv4l2.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libexynosv4l2.so.0.0.0 [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libexynosv4l2.so.0.0.0 libexynosv4l2.so.0 || { rm -f libexynosv4l2.so.0 && ln -s libexynosv4l2.so.0.0.0 libexynosv4l2.so.0; }; }) [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libexynosv4l2.so.0.0.0 libexynosv4l2.so || { rm -f libexynosv4l2.so && ln -s libexynosv4l2.so.0.0.0 libexynosv4l2.so; }; }) [ 93s] libtool: install: /bin/install -c .libs/libexynosv4l2.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libexynosv4l2.la [ 93s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 93s] make[2]: Nothing to be done for 'install-data-am'. [ 93s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 93s] Making install in libswconverter [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 93s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] /bin/sh ../libtool --mode=install /bin/install -c libswconverter.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] libtool: install: /bin/install -c .libs/libswconverter.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libswconverter.so.0.0.0 [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libswconverter.so.0.0.0 libswconverter.so.0 || { rm -f libswconverter.so.0 && ln -s libswconverter.so.0.0.0 libswconverter.so.0; }; }) [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libswconverter.so.0.0.0 libswconverter.so || { rm -f libswconverter.so && ln -s libswconverter.so.0.0.0 libswconverter.so; }; }) [ 93s] libtool: install: /bin/install -c .libs/libswconverter.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libswconverter.la [ 93s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 93s] make[2]: Nothing to be done for 'install-data-am'. [ 93s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 93s] Making install in libcsc [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 93s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] /bin/sh ../libtool --mode=install /bin/install -c libcsc.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] libtool: install: warning: relinking `libcsc.la' [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc; /bin/sh /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -I../include -DLOG_TAG=\"LIBCSC\" -I/usr/include/dlog -DUSE_DLOG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS -L../libswconverter -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libcsc.la -rpath /usr/lib libcsc_la-csc.lo -lswconverter -ldlog -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm) [ 93s] libtool: install: /bin/install -c .libs/libcsc.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libcsc.so.0.0.0 [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libcsc.so.0.0.0 libcsc.so.0 || { rm -f libcsc.so.0 && ln -s libcsc.so.0.0.0 libcsc.so.0; }; }) [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libcsc.so.0.0.0 libcsc.so || { rm -f libcsc.so && ln -s libcsc.so.0.0.0 libcsc.so; }; }) [ 93s] libtool: install: /bin/install -c .libs/libcsc.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libcsc.la [ 93s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 93s] make[2]: Nothing to be done for 'install-data-am'. [ 93s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 93s] Making install in libgscaler [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 93s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] /bin/sh ../libtool --mode=install /bin/install -c libexynosgscaler.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib' [ 93s] libtool: install: warning: relinking `libexynosgscaler.la' [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler; /bin/sh /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -DLOG_TAG=\"LIBEXYNOSGSCALER\" -I../include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -L../libcsc -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libexynosgscaler.la -rpath /usr/lib libexynosgscaler_la-libgscaler_obj.lo libexynosgscaler_la-libgscaler.lo -lcsc -ldlog -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm) [ 93s] libtool: install: /bin/install -c .libs/libexynosgscaler.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libexynosgscaler.so.0.0.0 [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libexynosgscaler.so.0.0.0 libexynosgscaler.so.0 || { rm -f libexynosgscaler.so.0 && ln -s libexynosgscaler.so.0.0.0 libexynosgscaler.so.0; }; }) [ 93s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib && { ln -s -f libexynosgscaler.so.0.0.0 libexynosgscaler.so || { rm -f libexynosgscaler.so && ln -s libexynosgscaler.so.0.0.0 libexynosgscaler.so; }; }) [ 93s] libtool: install: /bin/install -c .libs/libexynosgscaler.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libexynosgscaler.la [ 93s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 93s] make[2]: Nothing to be done for 'install-data-am'. [ 93s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 93s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 93s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 93s] make[2]: Nothing to be done for 'install-exec-am'. [ 93s] make[2]: Nothing to be done for 'install-data-am'. [ 93s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 93s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 93s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/share/info/dir [ 93s] + find /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm -regex '.*\.la$' [ 93s] + xargs rm -f -- [ 93s] + find /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm -regex '.*\.a$' [ 93s] + xargs rm -f -- [ 93s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1 [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libcsc.so.0.0.0 [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libexynosgscaler.so.0.0.0 [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libexynosv4l2.so.0.0.0 [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libion.so.0.0.0 [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/lib/libswconverter.so.0.0.0 [ 95s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 95s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 95s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 95s] 985 blocks [ 95s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libexynos-common-debuginfo.manifest [ 95s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libexynos-common-debugsource.manifest [ 95s] + /usr/lib/rpm/check-buildroot [ 95s] + /usr/lib/rpm//brp-compress [ 95s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 95s] + /usr/lib/rpm/brp-python-hardlink [ 95s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm [ 95s] Processing files: libexynos-common-0.0.1-1.1.armv7l [ 95s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 95s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 95s] [ 95s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.eTDK34 [ 95s] + umask 022 [ 95s] + cd /home/abuild/rpmbuild/BUILD [ 95s] + cd libexynos-common-0.0.1 [ 95s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/share/licenses/libexynos-common [ 95s] + export LICENSEDIR [ 95s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/share/licenses/libexynos-common [ 95s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm/usr/share/licenses/libexynos-common [ 95s] + exit 0 [ 95s] Provides: libcsc.so.0 libexynos-common = 0.0.1-1.1 libexynos-common(armv7l-32) = 0.0.1-1.1 libexynosgscaler.so.0 libexynosv4l2.so.0 libion.so.0 libswconverter.so.0 [ 95s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 95s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 95s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcsc.so.0 libdlog.so.0 libexynosgscaler.so.0 libexynosv4l2.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libion.so.0 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libswconverter.so.0 [ 95s] Processing files: libexynos-common-debugsource-0.0.1-1.1.armv7l [ 95s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 95s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 95s] [ 95s] Provides: libexynos-common-debugsource = 0.0.1-1.1 libexynos-common-debugsource(armv7l-32) = 0.0.1-1.1 [ 95s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 95s] Processing files: libexynos-common-devel-0.0.1-1.1.armv7l [ 95s] Provides: libexynos-common-devel = 0.0.1-1.1 libexynos-common-devel(armv7l-32) = 0.0.1-1.1 pkgconfig(exynos-common) = @VERSION@ [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Requires: /usr/bin/pkg-config [ 95s] Processing files: libexynos-common-debuginfo-0.0.1-1.1.armv7l [ 95s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 95s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 95s] [ 95s] warning: File listed twice: /usr/lib/debug/.build-id [ 95s] warning: File listed twice: /usr/lib/debug/.build-id [ 95s] warning: File listed twice: /usr/lib/debug/.build-id [ 95s] warning: File listed twice: /usr/lib/debug/.build-id [ 95s] Provides: libexynos-common-debuginfo = 0.0.1-1.1 libexynos-common-debuginfo(armv7l-32) = 0.0.1-1.1 [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm [ 95s] warning: Could not canonicalize hostname: obspw26 [ 95s] Wrote: /home/abuild/rpmbuild/SRPMS/libexynos-common-0.0.1-1.1.src.rpm [ 95s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-0.0.1-1.1.armv7l.rpm [ 95s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-debugsource-0.0.1-1.1.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-devel-0.0.1-1.1.armv7l.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-debuginfo-0.0.1-1.1.armv7l.rpm [ 96s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.CYVF8v [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd libexynos-common-0.0.1 [ 96s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-1.1.arm [ 96s] + exit 0 [ 96s] ... checking for files with abuild user/group [ 96s] ... creating baselibs [ 96s] [ 96s] obspw26 finished "build libexynos-common.spec" at Thu Oct 31 11:36:46 UTC 2019. [ 96s] Retried build at Thu Nov 7 05:15:29 2019 returned same result, skipped Retried build at Sat Nov 9 01:08:07 2019 returned same result, skipped Retried build at Tue Nov 19 08:42:52 2019 returned same result, skipped Retried build at Tue Dec 3 01:15:37 2019 returned same result, skipped Retried build at Tue Dec 10 03:53:27 2019 returned same result, skipped Retried build at Tue Dec 10 03:58:04 2019 returned same result, skipped Retried build at Thu Jan 9 11:51:47 2020 returned same result, skipped Retried build at Tue Jan 14 07:38:09 2020 returned same result, skipped Retried build at Wed Jan 15 12:31:44 2020 returned same result, skipped Retried build at Wed Feb 5 01:49:24 2020 returned same result, skipped Retried build at Mon Feb 10 13:27:16 2020 returned same result, skipped Retried build at Wed Feb 12 12:58:22 2020 returned same result, skipped Retried build at Tue Feb 18 15:05:57 2020 returned same result, skipped Retried build at Wed Feb 19 13:05:41 2020 returned same result, skipped Retried build at Mon Feb 24 01:29:07 2020 returned same result, skipped Retried build at Fri Feb 28 12:46:01 2020 returned same result, skipped Retried build at Thu Mar 19 09:45:29 2020 returned same result, skipped Retried build at Thu Mar 19 22:50:44 2020 returned same result, skipped Retried build at Tue Mar 24 13:56:18 2020 returned same result, skipped Retried build at Tue Mar 31 18:04:59 2020 returned same result, skipped Retried build at Fri Apr 3 16:21:53 2020 returned same result, skipped Retried build at Tue Apr 7 01:59:28 2020 returned same result, skipped Retried build at Fri Apr 10 16:16:04 2020 returned same result, skipped Retried build at Fri Apr 17 15:33:29 2020 returned same result, skipped Retried build at Mon Apr 27 09:51:34 2020 returned same result, skipped Retried build at Tue Apr 28 22:33:39 2020 returned same result, skipped Retried build at Tue May 5 13:40:51 2020 returned same result, skipped Retried build at Thu May 7 15:27:00 2020 returned same result, skipped Retried build at Fri May 8 18:02:52 2020 returned same result, skipped Retried build at Mon May 18 16:15:39 2020 returned same result, skipped Retried build at Wed Jun 3 23:04:04 2020 returned same result, skipped Retried build at Wed Jul 1 15:48:49 2020 returned same result, skipped Retried build at Tue Aug 4 15:45:21 2020 returned same result, skipped