[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_8 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw20 started "build _service:gbs:libsndfile.spec" at Thu Oct 31 04:16:32 UTC 2019. [ 0s] [ 0s] Building libsndfile for project 'Tizen:5.5:Unified' repository 'standard' arch 'armv7l' srcmd5 '72f50cb8e450f4d3d07cce5df6e28306' [ 0s] [ 0s] processing recipe /var/cache/build/root_8/.build-srcdir/_service:gbs:libsndfile.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_8/.build-srcdir/_service:gbs:libsndfile.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_8/.build.rpmlist /var/cache/build/root_8/.build-srcdir/_service:gbs:libsndfile.spec build rpmlint-Factory ... [ 2s] copying qemu [ 2s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 2s] [ 2s] registering binfmt handlers for cross build [ 2s] write: Invalid argument [ 2s] /proc/sys/fs/binfmt_misc/register: write failed [ 2s] /var/run/obs/worker/8/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 2s] [ 2s] /.build/qemu-reg: No such file or directory [ 2s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 2s] /usr/lib/build/qemu-reg: No such file or directory [ 2s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling libncurses... [ 2s] [3/40] preinstalling setup... [ 2s] [4/40] preinstalling filesystem... [ 2s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 3s] [8/40] preinstalling diffutils... [ 3s] [9/40] preinstalling grep... [ 3s] [10/40] preinstalling libattr... [ 3s] [11/40] preinstalling libbz2... [ 3s] [12/40] preinstalling libcap... [ 3s] [13/40] preinstalling libelf... [ 3s] [14/40] preinstalling libfreebl3... [ 3s] [15/40] preinstalling liblua... [ 3s] [16/40] preinstalling liblzma... [ 3s] [17/40] preinstalling libpopt... [ 3s] [18/40] preinstalling libreadline... [ 3s] [19/40] preinstalling libsmack... [ 3s] [20/40] preinstalling libsqlite... [ 3s] [21/40] preinstalling libuuid... [ 3s] [22/40] preinstalling nspr... [ 3s] [23/40] preinstalling sed... [ 3s] [24/40] preinstalling zlib... [ 3s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 9s] [37/40] preinstalling util-linux-su... [ 9s] [38/40] preinstalling nss... [ 9s] [39/40] preinstalling libsoftokn3... [ 9s] [40/40] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/103] installing libmagic-data-5.37-1.40 [ 9s] [2/103] installing setup-0.9-9.28 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [3/103] installing filesystem-3.1-1.1 [ 10s] [4/103] installing glibc-2.24-1.19 [ 10s] [5/103] installing libatomic-6.2.1-39.2 [ 10s] [6/103] installing libgcc-6.2.1-39.2 [ 11s] [7/103] installing bash-3.2.57-1.1 [ 11s] [8/103] installing binutils-2.27-1.24 [ 11s] [9/103] installing cpio-2.11-1.1 [ 11s] [10/103] installing diffutils-3.3-1.1 [ 11s] [11/103] installing findutils-4.3.8-1.64 [ 11s] [12/103] installing gdbm-1.8.3-1.68 [ 11s] [13/103] installing hostname-3.20-1.1 [ 11s] [14/103] installing libattr-2.4.47-1.70 [ 12s] [15/103] installing libbz2-1.0.6-1.59 [ 12s] [16/103] installing libcap-2.24-1.69 [ 12s] [17/103] installing libelf-0.153-1.6 [ 13s] [18/103] installing libext2fs-1.43.4-6.2 [ 13s] [19/103] installing libfreebl3-3.34.1-1.37 [ 13s] [20/103] installing libgomp-6.2.1-39.2 [ 14s] [21/103] installing libitm-6.2.1-39.2 [ 14s] [22/103] installing libltdl-2.4.2-1.51 [ 14s] [23/103] installing liblua-5.1.5-1.1 [ 15s] [24/103] installing liblzma-5.2.4-1.47 [ 15s] [25/103] installing libogg-1.3.2-1.1 [ 15s] [26/103] installing libopenssl11-1.1.1d-1.24 [ 16s] [27/103] installing libpcre-8.43-1.3 [ 16s] [28/103] installing libpopt-1.16-1.1 [ 16s] [29/103] installing libpython-2.7.15-1.15 [ 17s] [30/103] installing libsmack-1.3.1-1.1 [ 17s] [31/103] installing libsmartcols-2.30-13.29 [ 17s] [32/103] installing libsqlite-3.29.0-1.24 [ 18s] [33/103] installing libstdc++-6.2.1-39.2 [ 18s] [34/103] installing libuuid-2.30-13.29 [ 18s] [35/103] installing m4-1.4.17-1.1 [ 19s] [36/103] installing net-tools-2.0_20121208git-1.1 [ 19s] [37/103] installing nspr-4.12-1.1 [ 19s] [38/103] installing patch-2.7-1.1 [ 19s] [39/103] installing pkg-config-0.28-1.62 [ 19s] [40/103] installing sed-4.1c-4.4 [ 19s] [41/103] installing update-alternatives-1.18.15-4.4 [ 19s] [42/103] installing which-2.20-6.4 [ 19s] [43/103] installing zlib-1.2.11-1.67 [ 20s] [44/103] installing build-compare-2015.04.28-1.13 [ 20s] [45/103] installing libstdc++-devel-6.2.1-39.2 [ 20s] [46/103] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 21s] [47/103] installing terminfo-base-full-6.1-1.36 [ 22s] [48/103] installing cpp-6.2.1-39.2 [ 22s] [49/103] installing gcc-c++-6.2.1-39.2 [ 23s] [50/103] installing coreutils-6.9-1.3 [ 23s] [51/103] installing db4-4.8.30.NC-1.61 [ 24s] [52/103] installing gawk-3.1.5-5.5 [ 24s] [53/103] installing grep-2.5.2-6.4 [ 24s] [54/103] installing libacl-2.2.52-1.70 [ 24s] [55/103] installing libasm-0.153-1.6 [ 24s] [56/103] installing libblkid-2.30-13.29 [ 25s] [57/103] installing libcc1-6.2.1-39.2 [ 25s] [58/103] installing libgfortran-6.2.1-39.2 [ 25s] [59/103] installing libubsan-6.2.1-39.2 [ 26s] [60/103] installing libvorbis-1.3.4-1.1 [ 26s] [61/103] installing make-4.0-1.5 [ 26s] [62/103] installing nss-certs-3.34.1-1.37 [ 26s] [63/103] installing smack-1.3.1-1.1 [ 26s] [64/103] installing bzip2-1.0.6-1.59 [ 26s] [65/103] installing libmagic-5.37-1.40 [ 27s] [66/103] installing libxml2-2.9.7-1.20 [ 27s] [67/103] installing xz-5.2.4-1.47 [ 27s] [68/103] installing libdw-0.153-1.6 [ 27s] [69/103] installing linux-glibc-devel-3.10-1.69 [ 28s] [70/103] installing file-5.37-1.40 [ 28s] [71/103] installing glibc-locale-2.24-1.19 [ 29s] [72/103] installing libmount-2.30-13.29 [ 29s] [73/103] installing tar-1.17-4.4 [ 29s] [74/103] installing gzip-1.3.12-1.71 [ 29s] [75/103] installing libfdisk-2.30-13.29 [ 30s] [76/103] installing libncurses6-6.1-1.36 [ 30s] [77/103] installing libvorbisenc-1.3.4-1.1 [ 30s] [78/103] installing libvorbisfile-1.3.4-1.1 [ 31s] [79/103] installing pam-1.1.6-8.2 [ 31s] [80/103] installing perl-5.30.0-1.7 [ 33s] [81/103] installing tzdata-2019a-11.1 [ 33s] [82/103] installing elfutils-0.153-1.6 [ 33s] [83/103] installing gcc-6.2.1-39.2 [ 34s] [84/103] installing build-mkbaselibs-20120927-1.1 [ 34s] [85/103] installing libncurses-6.1-1.36 [ 34s] [86/103] installing glibc-devel-2.24-1.19 [ 34s] [87/103] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 40s] [88/103] installing autoconf-2.69-1.20 [ 41s] [89/103] installing less-466-1.1 [ 41s] [90/103] installing libreadline-5.2-1.21 [ 41s] [91/103] installing procps-ng-3.3.15-1.1 [ 41s] [92/103] installing automake-1.15.1-1.42 [ 41s] [93/103] installing libogg-devel-1.3.2-1.1 [ 42s] [94/103] installing build-20120927-1.1 [ 42s] [95/103] installing python-2.7.15-1.15 [ 43s] [96/103] installing util-linux-2.30-13.29 [ 43s] [97/103] installing libtool-2.4.2-1.51 [ 43s] [98/103] installing util-linux-su-2.30-13.29 [ 43s] [99/103] installing libvorbis-devel-1.3.4-1.1 [ 43s] [100/103] installing nss-3.34.1-1.37 [ 43s] [101/103] installing libsoftokn3-3.34.1-1.37 [ 43s] [102/103] installing rpm-4.11.0.1-1.27 [ 44s] [103/103] installing rpm-build-4.11.0.1-1.27 [ 44s] removing nis flags from /var/cache/build/root_8/etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 44s] Running build time source services... [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for libsndfile.spec: [ 45s] 5c5 [ 45s] < Release: 2 [ 45s] --- [ 45s] > Release: 1.1 [ 45s] ----------------------------------------------------------------- [ 45s] ----- building libsndfile.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified/standard/72f50cb8e450f4d3d07cce5df6e28306-libsndfile' -ba /home/abuild/rpmbuild/SOURCES/libsndfile.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DhVGew [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf libsndfile-1.0.28 [ 45s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libsndfile-1.0.28.tar.gz [ 45s] + /bin/tar -xf - [ 45s] + STATUS=0 [ 45s] + '[' 0 -ne 0 ']' [ 45s] + cd libsndfile-1.0.28 [ 45s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 45s] + echo 'Patch #0 (5c5f693-to-db3fc6c.diff.gz):' [ 45s] Patch #0 (5c5f693-to-db3fc6c.diff.gz): [ 45s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/5c5f693-to-db3fc6c.diff.gz [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file configure.ac [ 45s] patching file examples/generate.c [ 45s] patching file src/Makefile.am [ 45s] patching file src/aiff.c [ 45s] patching file src/au.c [ 45s] patching file src/avr.c [ 45s] patching file src/caf.c [ 45s] patching file src/common.c [ 45s] patching file src/common.h [ 45s] patching file src/double64.c [ 45s] patching file src/flac.c [ 45s] patching file src/htk.c [ 45s] patching file src/ircam.c [ 45s] patching file src/mat4.c [ 45s] patching file src/mat5.c [ 45s] patching file src/mpc2k.c [ 45s] patching file src/ms_adpcm.c [ 45s] patching file src/nist.c [ 45s] patching file src/ogg_vorbis.c [ 45s] patching file src/paf.c [ 45s] patching file src/raw.c [ 45s] patching file src/rf64.c [ 45s] patching file src/sd2.c [ 45s] patching file src/sds.c [ 45s] patching file src/sndfile.c [ 45s] patching file src/svx.c [ 45s] patching file src/test_binheader_writef.c [ 45s] patching file src/voc.c [ 45s] patching file src/w64.c [ 45s] patching file src/wav.c [ 45s] patching file src/wavlike.c [ 45s] patching file src/wve.c [ 45s] patching file src/xi.c [ 45s] patching file tests/benchmark.c [ 45s] patching file tests/floating_point_test.c [ 45s] patching file tests/misc_test.c [ 45s] patching file tests/pipe_test.c [ 45s] patching file tests/rdwr_test.c [ 45s] patching file tests/scale_clip_test.c [ 45s] patching file tests/utils.c [ 45s] patching file tests/utils.h [ 45s] + echo 'Patch #1 (0002-src-flac.c-Fix-a-memory-leak.patch):' [ 45s] Patch #1 (0002-src-flac.c-Fix-a-memory-leak.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-src-flac.c-Fix-a-memory-leak.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/flac.c [ 45s] + echo 'Patch #2 (0003-FLAC-Fix-a-buffer-read-overrun.patch):' [ 45s] Patch #2 (0003-FLAC-Fix-a-buffer-read-overrun.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-FLAC-Fix-a-buffer-read-overrun.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/common.h [ 45s] patching file src/flac.c [ 45s] patching file src/sndfile.c [ 45s] + echo 'Patch #3 (0004-src-flac.c-Fix-another-memory-leak.patch):' [ 45s] Patch #3 (0004-src-flac.c-Fix-another-memory-leak.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-src-flac.c-Fix-another-memory-leak.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/flac.c [ 45s] + echo 'Patch #4 (0005-a-ulaw-fix-multiple-buffer-overflows-432.patch):' [ 45s] Patch #4 (0005-a-ulaw-fix-multiple-buffer-overflows-432.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-a-ulaw-fix-multiple-buffer-overflows-432.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/alaw.c [ 45s] patching file src/ulaw.c [ 45s] + echo 'Patch #5 (0006-src-wav.c-Fix-WAV-Sampler-Chunk-tune-parsing.patch):' [ 45s] Patch #5 (0006-src-wav.c-Fix-WAV-Sampler-Chunk-tune-parsing.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-src-wav.c-Fix-WAV-Sampler-Chunk-tune-parsing.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/wav.c [ 45s] patching file tests/command_test.c [ 45s] + echo 'Patch #6 (0007-src-wav.c-Fix-heap-read-overflow.patch):' [ 45s] Patch #6 (0007-src-wav.c-Fix-heap-read-overflow.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-src-wav.c-Fix-heap-read-overflow.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/wav.c [ 45s] + echo 'Patch #7 (0008-wav_write_header-don-t-read-past-the-array-end.patch):' [ 45s] Patch #7 (0008-wav_write_header-don-t-read-past-the-array-end.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-wav_write_header-don-t-read-past-the-array-end.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/wav.c [ 45s] + echo 'Patch #8 (0009-Check-MAX_CHANNELS-in-sndfile-deinterleave.patch):' [ 45s] Patch #8 (0009-Check-MAX_CHANNELS-in-sndfile-deinterleave.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-Check-MAX_CHANNELS-in-sndfile-deinterleave.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file programs/sndfile-deinterleave.c [ 45s] + echo 'Patch #9 (0010-src-flac.c-Fix-a-buffer-read-overflow.patch):' [ 45s] Patch #9 (0010-src-flac.c-Fix-a-buffer-read-overflow.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-src-flac.c-Fix-a-buffer-read-overflow.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/flac.c [ 45s] + echo 'Patch #10 (0011-Fix-max-channel-count-bug.patch):' [ 45s] Patch #10 (0011-Fix-max-channel-count-bug.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-Fix-max-channel-count-bug.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/aiff.c [ 45s] patching file src/rf64.c [ 45s] patching file src/w64.c [ 45s] patching file src/wav.c [ 45s] + cp /home/abuild/rpmbuild/SOURCES/libsndfile.manifest . [ 45s] + exit 0 [ 45s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ky21Tj [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd libsndfile-1.0.28 [ 45s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + LDFLAGS= [ 45s] + export LDFLAGS [ 45s] + autoreconf --force --install [ 60s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `Cfg'. [ 60s] libtoolize: copying file `Cfg/ltmain.sh' [ 60s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `M4'. [ 60s] libtoolize: copying file `M4/libtool.m4' [ 60s] libtoolize: copying file `M4/ltoptions.m4' [ 60s] libtoolize: copying file `M4/ltsugar.m4' [ 60s] libtoolize: copying file `M4/ltversion.m4' [ 60s] libtoolize: copying file `M4/lt~obsolete.m4' [ 80s] configure.ac:32: installing 'Cfg/ar-lib' [ 80s] configure.ac:23: installing 'Cfg/compile' [ 80s] configure.ac:14: installing 'Cfg/config.guess' [ 80s] configure.ac:14: installing 'Cfg/config.sub' [ 80s] configure.ac:18: installing 'Cfg/install-sh' [ 80s] configure.ac:18: installing 'Cfg/missing' [ 80s] Makefile.am: installing './INSTALL' [ 82s] examples/Makefile.am: installing 'Cfg/depcomp' [ 85s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -W -Wall -Wstrict-prototypes -Wpointer-arith -Wno-unused-parameter -D__TIZEN__' [ 85s] + export CFLAGS [ 85s] + LDFLAGS=-ldl [ 85s] + export LDFLAGS [ 85s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -W -Wall -Wstrict-prototypes -Wpointer-arith -Wno-unused-parameter -D__TIZEN__' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-dependency-tracking --disable-sqlite --disable-alsa [ 86s] checking build system type... armv7l-tizen-linux-gnueabi [ 86s] checking host system type... armv7l-tizen-linux-gnueabi [ 86s] checking target system type... armv7l-tizen-linux-gnueabi [ 86s] checking for a BSD-compatible install... /bin/install -c [ 86s] checking whether build environment is sane... yes [ 86s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 86s] checking for gawk... gawk [ 86s] checking whether make sets $(MAKE)... yes [ 86s] checking whether make supports nested variables... yes [ 86s] checking whether make supports nested variables... (cached) yes [ 86s] checking for style of include used by make... GNU [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 86s] checking whether the C compiler works... yes [ 86s] checking for C compiler default output file name... a.out [ 86s] checking for suffix of executables... [ 86s] checking whether we are cross compiling... no [ 86s] checking for suffix of object files... o [ 86s] checking whether we are using the GNU C compiler... yes [ 86s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 86s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 86s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... none [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... none needed [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO Standard C... (cached) none needed [ 86s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 86s] checking for grep that handles long lines and -e... /bin/grep [ 86s] checking for egrep... /bin/grep -E [ 86s] checking for ANSI C header files... yes [ 86s] checking for sys/types.h... yes [ 86s] checking for sys/stat.h... yes [ 86s] checking for stdlib.h... yes [ 86s] checking for string.h... yes [ 86s] checking for memory.h... yes [ 86s] checking for strings.h... yes [ 87s] checking for inttypes.h... yes [ 87s] checking for stdint.h... yes [ 87s] checking for unistd.h... yes [ 87s] checking minix/config.h usability... no [ 87s] checking minix/config.h presence... no [ 87s] checking for minix/config.h... no [ 87s] checking whether it is safe to define __EXTENSIONS__... yes [ 87s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 87s] checking whether we are using the GNU C++ compiler... yes [ 87s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 87s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... none [ 87s] checking whether we are using the CLANG C compiler... no [ 87s] checking for a sed that does not truncate output... /bin/sed [ 87s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 87s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 87s] checking for armv7l-tizen-linux-gnueabi-link... no [ 87s] checking for ar... ar [ 87s] checking the archiver (ar) interface... ar [ 87s] checking how to print strings... printf [ 87s] checking for a sed that does not truncate output... (cached) /bin/sed [ 87s] checking for fgrep... /bin/grep -F [ 87s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 87s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 87s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 87s] checking the name lister (/bin/nm -B) interface... BSD nm [ 87s] checking whether ln -s works... yes [ 87s] checking the maximum length of command line arguments... 1572864 [ 87s] checking whether the shell understands some XSI constructs... yes [ 87s] checking whether the shell understands "+="... yes [ 87s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 87s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 87s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 87s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 87s] checking for objdump... objdump [ 87s] checking how to recognize dependent libraries... pass_all [ 87s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 87s] checking for dlltool... no [ 87s] checking how to associate runtime and link libraries... printf %s\n [ 87s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 87s] checking for archiver @FILE support... @ [ 87s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 87s] checking for strip... strip [ 87s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 87s] checking for ranlib... ranlib [ 87s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 87s] checking for sysroot... no [ 87s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 87s] checking for mt... no [ 87s] checking if : is a manifest tool... no [ 87s] checking for dlfcn.h... yes [ 87s] checking for objdir... .libs [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 87s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking whether -lc should be explicitly linked in... no [ 87s] checking dynamic linker characteristics... GNU/Linux ld.so [ 87s] checking how to hardcode library paths into programs... immediate [ 87s] checking whether stripping libraries is possible... yes [ 87s] checking if libtool supports shared libraries... yes [ 87s] checking whether to build shared libraries... yes [ 87s] checking whether to build static libraries... no [ 87s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 88s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 88s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 88s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 88s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 88s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 88s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 88s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 88s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 88s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 88s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 88s] checking how to hardcode library paths into programs... immediate [ 88s] checking for armv7l-tizen-linux-gnueabi-windres... no [ 88s] checking for windres... no [ 88s] checking whether ln -s works... yes [ 88s] checking for autogen... no [ 88s] checking for wine... no [ 88s] checking for xcode-select... no [ 88s] checking for ANSI C header files... (cached) yes [ 88s] checking endian.h usability... yes [ 88s] checking endian.h presence... yes [ 88s] checking for endian.h... yes [ 88s] checking byteswap.h usability... yes [ 88s] checking byteswap.h presence... yes [ 88s] checking for byteswap.h... yes [ 88s] checking locale.h usability... yes [ 88s] checking locale.h presence... yes [ 88s] checking for locale.h... yes [ 88s] checking sys/time.h usability... yes [ 88s] checking sys/time.h presence... yes [ 88s] checking for sys/time.h... yes [ 88s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 88s] checking whether S_IRGRP is declared... yes [ 88s] checking whether the -Werror option is usable... no [ 88s] checking for simple visibility declarations... yes [ 88s] checking size of wchar_t... 4 [ 88s] checking size of short... 2 [ 88s] checking size of int... 4 [ 89s] checking size of long... 4 [ 89s] checking size of float... 4 [ 89s] checking size of double... 8 [ 89s] checking size of void*... 4 [ 89s] checking size of size_t... 4 [ 89s] checking size of int64_t... 8 [ 89s] checking size of long long... 8 [ 89s] checking size of off_t... 4 [ 89s] checking for special C compiler options needed for large files... no [ 89s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 89s] checking size of off_t... 8 [ 89s] checking for ssize_t... yes [ 89s] checking processor byte ordering... little [ 89s] checking for malloc... yes [ 90s] checking for calloc... yes [ 90s] checking for realloc... yes [ 90s] checking for free... yes [ 90s] checking for open... yes [ 90s] checking for read... yes [ 90s] checking for write... yes [ 90s] checking for lseek... yes [ 90s] checking for lseek64... yes [ 90s] checking for fstat... yes [ 90s] checking for fstat64... yes [ 90s] checking for ftruncate... yes [ 90s] checking for fsync... yes [ 90s] checking for snprintf... yes [ 90s] checking for vsnprintf... yes [ 90s] checking for gmtime... yes [ 90s] checking for gmtime_r... yes [ 90s] checking for localtime... yes [ 91s] checking for localtime_r... yes [ 91s] checking for gettimeofday... yes [ 91s] checking for mmap... yes [ 91s] checking for getpagesize... yes [ 91s] checking for setlocale... yes [ 91s] checking for pipe... yes [ 91s] checking for waitpid... yes [ 91s] checking for floor in -lm... yes [ 91s] checking for floor... yes [ 91s] checking for ceil... yes [ 91s] checking for fmod... yes [ 91s] checking for lround... yes [ 91s] checking for lrint... yes [ 91s] checking for lrintf... yes [ 91s] checking for octave... no [ 91s] checking for mkoctfile... no [ 91s] checking for octave-config... no [ 91s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 91s] checking pkg-config is at least version 0.9.0... yes [ 92s] checking for ogg >= 1.1.3 ... yes [ 92s] checking for vorbis >= 1.2.3 ... yes [ 92s] checking for vorbisenc >= 1.2.3 ... yes [ 92s] checking processor clipping capabilities... both [ 92s] configure: WARNING: Touching files in directory tests/. [ 92s] checking if armv7l-tizen-linux-gnueabi-gcc accepts -std=gnu99... yes [ 92s] checking for version of armv7l-tizen-linux-gnueabi-gcc... 6.2.1 [ 92s] checking if armv7l-tizen-linux-gnueabi-gcc accepts -Wextra... yes [ 92s] checking if armv7l-tizen-linux-gnueabi-gcc accepts -Wdeclaration-after-statement... yes [ 92s] checking if armv7l-tizen-linux-gnueabi-gcc accepts -Wpointer-arith... yes [ 92s] checking if armv7l-tizen-linux-gnueabi-g++ accepts -Wextra... yes [ 92s] checking if armv7l-tizen-linux-gnueabi-g++ accepts -Wpointer-arith... yes [ 92s] checking whether to add -D_FORTIFY_SOURCE=2 to CPPFLAGS... no [ 93s] checking that generated files are newer than configure... done [ 93s] configure: creating ./config.status [ 93s] config.status: creating src/Makefile [ 93s] config.status: creating man/Makefile [ 93s] config.status: creating examples/Makefile [ 93s] config.status: creating tests/Makefile [ 93s] config.status: creating regtest/Makefile [ 93s] config.status: creating M4/Makefile [ 93s] config.status: creating doc/Makefile [ 93s] config.status: creating Win32/Makefile [ 94s] config.status: creating Octave/Makefile [ 94s] config.status: creating programs/Makefile [ 94s] config.status: creating Makefile [ 94s] config.status: creating src/version-metadata.rc [ 94s] config.status: creating tests/test_wrapper.sh [ 94s] config.status: creating tests/pedantic-header-test.sh [ 94s] config.status: creating doc/libsndfile.css [ 94s] config.status: creating Scripts/build-test-tarball.mk [ 94s] config.status: creating libsndfile.spec [ 94s] config.status: creating sndfile.pc [ 94s] config.status: creating src/sndfile.h [ 94s] config.status: creating echo-install-dirs [ 94s] config.status: creating src/config.h [ 94s] config.status: executing depfiles commands [ 94s] config.status: executing libtool commands [ 94s] [ 94s] -=-=-=-=-=-=-=-=-=-= Configuration Complete =-=-=-=-=-=-=-=-=-=- [ 94s] [ 94s] Configuration summary : [ 94s] [ 94s] libsndfile version : .................. 1.0.28 [ 94s] [ 94s] Host CPU : ............................ armv7l [ 94s] Host Vendor : ......................... tizen [ 94s] Host OS : ............................. linux-gnueabi [ 94s] [ 94s] Experimental code : ................... no [ 94s] Using ALSA in example programs : ...... no [ 94s] External Ogg/Vorbis : .................. yes [ 94s] [ 94s] Tools : [ 94s] [ 94s] Compiler is Clang : ................... no [ 94s] Compiler is GCC : ..................... yes [ 94s] GCC version : ......................... 6.2.1 [ 94s] Sanitizer enabled : ................... no [ 94s] Stack smash protection : .............. no [ 94s] [ 94s] Installation directories : [ 94s] [ 94s] Library directory : ................... /usr/lib [ 94s] Program directory : ................... /usr/bin [ 94s] Pkgconfig directory : ................. /usr/lib/pkgconfig [ 94s] HTML docs directory : ................. /usr/share/doc/ [ 94s] [ 94s] Compiling some other packages against libsndfile may require [ 94s] the addition of '/usr/lib/pkgconfig' to the [ 94s] PKG_CONFIG_PATH environment variable. [ 94s] [ 94s] + make -j4 [ 94s] Making all in M4 [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/M4' [ 94s] make[1]: Nothing to be done for 'all'. [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/M4' [ 94s] Making all in Win32 [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/Win32' [ 94s] make[1]: Nothing to be done for 'all'. [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/Win32' [ 94s] Making all in src [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 94s] make all-am [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 94s] CC libsndfile_la-sndfile.lo [ 94s] CC libsndfile_la-aiff.lo [ 94s] CC libsndfile_la-au.lo [ 94s] CC libsndfile_la-avr.lo [ 94s] CC libsndfile_la-dwd.lo [ 94s] CC libsndfile_la-flac.lo [ 94s] CC libsndfile_la-htk.lo [ 94s] CC libsndfile_la-ircam.lo [ 95s] CC libsndfile_la-macos.lo [ 95s] CC libsndfile_la-mat4.lo [ 95s] CC libsndfile_la-mat5.lo [ 95s] CC libsndfile_la-nist.lo [ 95s] CC libsndfile_la-paf.lo [ 95s] CC libsndfile_la-pvf.lo [ 95s] CC libsndfile_la-raw.lo [ 95s] CC libsndfile_la-rx2.lo [ 95s] CC libsndfile_la-sd2.lo [ 95s] CC libsndfile_la-sds.lo [ 95s] CC libsndfile_la-svx.lo [ 95s] CC libsndfile_la-txw.lo [ 95s] CC libsndfile_la-voc.lo [ 95s] CC libsndfile_la-wve.lo [ 95s] CC libsndfile_la-w64.lo [ 95s] CC libsndfile_la-wavlike.lo [ 95s] CC libsndfile_la-wav.lo [ 95s] CC libsndfile_la-xi.lo [ 95s] CC libsndfile_la-mpc2k.lo [ 95s] CC libsndfile_la-rf64.lo [ 96s] CC libsndfile_la-ogg_vorbis.lo [ 96s] CC libsndfile_la-ogg_speex.lo [ 96s] CC libsndfile_la-ogg_pcm.lo [ 96s] CC libsndfile_la-ogg_opus.lo [ 96s] CC common.lo [ 96s] CC file_io.lo [ 96s] CC command.lo [ 96s] CC pcm.lo [ 96s] CC ulaw.lo [ 96s] CC alaw.lo [ 96s] CC float32.lo [ 96s] CC double64.lo [ 96s] CC ima_adpcm.lo [ 97s] CC ms_adpcm.lo [ 97s] CC dwvw.lo [ 97s] CC vox_adpcm.lo [ 97s] CC interleave.lo [ 97s] CC strings.lo [ 97s] CC dither.lo [ 97s] CC cart.lo [ 97s] CC broadcast.lo [ 97s] CC audio_detect.lo [ 97s] CC ima_oki_adpcm.lo [ 97s] CC chunk.lo [ 97s] CC ogg.lo [ 97s] CC chanmap.lo [ 97s] CC windows.lo [ 97s] CC id3.lo [ 97s] python ./create_symbols_file.py linux 1.0.28 > Symbols.gnu-binutils [ 97s] python ./create_symbols_file.py darwin 1.0.28 > Symbols.darwin [ 97s] python ./create_symbols_file.py win32 1.0.28 > libsndfile-1.def [ 97s] python ./create_symbols_file.py os2 1.0.28 > Symbols.os2 [ 97s] python ./create_symbols_file.py static 1.0.28 > Symbols.static [ 97s] CCLD libcommon.la [ 98s] CCLD libsndfile.la [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 98s] Making all in examples [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 98s] make[1]: Nothing to be done for 'all'. [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 98s] Making all in tests [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/tests' [ 98s] make[1]: Nothing to be done for 'all'. [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/tests' [ 98s] Making all in man [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/man' [ 98s] ln -s ./sndfile-metadata-get.1 sndfile-metadata-set.1 [ 98s] ln -s ./sndfile-interleave.1 sndfile-deinterleave.1 [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/man' [ 98s] Making all in doc [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/doc' [ 98s] make[1]: Nothing to be done for 'all'. [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/doc' [ 98s] Making all in regtest [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/regtest' [ 98s] make[1]: Nothing to be done for 'all'. [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/regtest' [ 98s] Making all in programs [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/programs' [ 98s] CC sndfile-info.o [ 98s] CC common.o [ 98s] CC sndfile-convert.o [ 98s] CC sndfile-play.o [ 98s] CC sndfile-cmp.o [ 98s] CC sndfile-metadata-set.o [ 98s] CC sndfile-metadata-get.o [ 98s] CC sndfile-interleave.o [ 98s] CC sndfile-deinterleave.o [ 98s] CC sndfile-concat.o [ 98s] CC sndfile-salvage.o [ 98s] CCLD sndfile-info [ 98s] CCLD sndfile-play [ 98s] CCLD sndfile-convert [ 98s] CCLD sndfile-cmp [ 98s] CCLD sndfile-metadata-set [ 98s] CCLD sndfile-metadata-get [ 98s] CCLD sndfile-interleave [ 98s] CCLD sndfile-deinterleave [ 98s] CCLD sndfile-concat [ 98s] CCLD sndfile-salvage [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/programs' [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28' [ 98s] make[1]: Nothing to be done for 'all-am'. [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28' [ 98s] + exit 0 [ 98s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.O1eqiQ [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd libsndfile-1.0.28 [ 98s] + LANG=C [ 98s] + export LANG [ 98s] + unset DISPLAY [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm [ 98s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm [ 98s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm install [ 98s] Making install in M4 [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/M4' [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/M4' [ 98s] make[2]: Nothing to be done for 'install-exec-am'. [ 98s] make[2]: Nothing to be done for 'install-data-am'. [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/M4' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/M4' [ 98s] Making install in Win32 [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/Win32' [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/Win32' [ 98s] make[2]: Nothing to be done for 'install-exec-am'. [ 98s] make[2]: Nothing to be done for 'install-data-am'. [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/Win32' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/Win32' [ 98s] Making install in src [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib' [ 98s] /bin/sh ../libtool --mode=install /bin/install -c libsndfile.la '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib' [ 98s] libtool: install: /bin/install -c .libs/libsndfile.so.1.0.28 /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib/libsndfile.so.1.0.28 [ 98s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib && { ln -s -f libsndfile.so.1.0.28 libsndfile.so.1 || { rm -f libsndfile.so.1 && ln -s libsndfile.so.1.0.28 libsndfile.so.1; }; }) [ 98s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib && { ln -s -f libsndfile.so.1.0.28 libsndfile.so || { rm -f libsndfile.so && ln -s libsndfile.so.1.0.28 libsndfile.so; }; }) [ 98s] libtool: install: /bin/install -c .libs/libsndfile.lai /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib/libsndfile.la [ 98s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/include' [ 98s] /bin/install -c -m 644 sndfile.hh '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/include' [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/include' [ 99s] /bin/install -c -m 644 sndfile.h '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/include' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/src' [ 99s] Making install in examples [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] make[2]: Nothing to be done for 'install-data-am'. [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 99s] Making install in tests [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/tests' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/tests' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] make[2]: Nothing to be done for 'install-data-am'. [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/tests' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/tests' [ 99s] Making install in man [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/man' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/man' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/man/man1' [ 99s] /bin/install -c -m 644 sndfile-info.1 sndfile-play.1 sndfile-convert.1 sndfile-cmp.1 sndfile-metadata-get.1 sndfile-metadata-set.1 sndfile-concat.1 sndfile-interleave.1 sndfile-deinterleave.1 sndfile-salvage.1 '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/man/man1' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/man' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/man' [ 99s] Making install in doc [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/doc' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/doc' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/doc/libsndfile' [ 99s] /bin/install -c -m 644 index.html libsndfile.jpg libsndfile.css api.html command.html bugs.html sndfile_info.html new_file_type.HOWTO win32.html FAQ.html lists.html embedded_files.html octave.html tutorial.html '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/doc/libsndfile' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/doc' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/doc' [ 99s] Making install in regtest [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/regtest' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/regtest' [ 99s] make[2]: Nothing to be done for 'install-data-am'. [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/regtest' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/regtest' [ 99s] Making install in programs [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/programs' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/programs' [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin' [ 99s] /bin/sh ../libtool --mode=install /bin/install -c sndfile-info sndfile-play sndfile-convert sndfile-cmp sndfile-metadata-set sndfile-metadata-get sndfile-interleave sndfile-deinterleave sndfile-concat sndfile-salvage '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin' [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-info /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-info [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-play /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-play [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-convert /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-convert [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-cmp /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-cmp [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-metadata-set /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-metadata-set [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-metadata-get /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-metadata-get [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-interleave /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-interleave [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-deinterleave /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-deinterleave [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-concat /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-concat [ 99s] libtool: install: warning: `../src/libsndfile.la' has not been installed in `/usr/lib' [ 99s] libtool: install: /bin/install -c .libs/sndfile-salvage /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin/sndfile-salvage [ 99s] make[2]: Nothing to be done for 'install-data-am'. [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/programs' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/programs' [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib/pkgconfig' [ 99s] /bin/install -c -m 644 sndfile.pc '/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib/pkgconfig' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28' [ 99s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/info/dir [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm -regex '.*\.la$' [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm -regex '.*\.a$' [ 99s] + xargs rm -f -- [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/bin [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/man/man1 [ 99s] + make -C examples distclean [ 99s] make: Entering directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 99s] rm -f make_sine sfprocess list_formats generate sndfilehandle sndfile-to-text sndfile-loopify [ 99s] test -z "*~ *.exe" || rm -f *~ *.exe [ 99s] rm -rf .libs _libs [ 99s] rm -f *.o [ 99s] rm -f *.lo [ 99s] rm -f *.tab.c [ 99s] test -z "" || rm -f [ 99s] test . = "." || test -z "" || rm -f [ 99s] rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags [ 99s] rm -rf ./.deps [ 99s] rm -f Makefile [ 99s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/examples' [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/doc/libsndfile [ 99s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/libsndfile-1.0.28 [ 99s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/lib/libsndfile.so.1.0.28 [ 99s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 99s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 99s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 99s] 2385 blocks [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/libsndfile-debuginfo.manifest [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libsndfile-1.0.28/libsndfile-debugsource.manifest [ 99s] + /usr/lib/rpm/check-buildroot [ 99s] + /usr/lib/rpm//brp-compress [ 99s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 100s] + /usr/lib/rpm/brp-python-hardlink [ 100s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm [ 100s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.wBmTEq [ 100s] Processing files: libsndfile-1.0.28-1.1.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.swV210 [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd libsndfile-1.0.28 [ 100s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/licenses/libsndfile [ 100s] + export LICENSEDIR [ 100s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/licenses/libsndfile [ 100s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm/usr/share/licenses/libsndfile [ 100s] + exit 0 [ 100s] Provides: libsndfile = 1.0.28-1.1 libsndfile(armv7l-32) = 1.0.28-1.1 libsndfile.so.1 libsndfile.so.1(libsndfile.so.1.0) [ 100s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires(post): /sbin/ldconfig [ 100s] Requires(postun): /sbin/ldconfig [ 100s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libdl.so.2(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libogg.so.0 libvorbis.so.0 rtld(GNU_HASH) [ 100s] Processing files: libsndfile-debugsource-1.0.28-1.1.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Provides: libsndfile-debugsource = 1.0.28-1.1 libsndfile-debugsource(armv7l-32) = 1.0.28-1.1 [ 100s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 100s] Processing files: libsndfile-devel-1.0.28-1.1.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Provides: libsndfile-devel = 1.0.28-1.1 libsndfile-devel(armv7l-32) = 1.0.28-1.1 pkgconfig(sndfile) = 1.0.28 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires: /usr/bin/pkg-config libsndfile.so.1 [ 100s] Processing files: libsndfile-debuginfo-1.0.28-1.1.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Provides: libsndfile-debuginfo = 1.0.28-1.1 libsndfile-debuginfo(armv7l-32) = 1.0.28-1.1 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm [ 100s] warning: Could not canonicalize hostname: obsnw20 [ 100s] Wrote: /home/abuild/rpmbuild/SRPMS/libsndfile-1.0.28-1.1.src.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libsndfile-1.0.28-1.1.armv7l.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libsndfile-debugsource-1.0.28-1.1.armv7l.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libsndfile-devel-1.0.28-1.1.armv7l.rpm [ 101s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libsndfile-debuginfo-1.0.28-1.1.armv7l.rpm [ 101s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yi5jII [ 101s] + umask 022 [ 101s] + cd /home/abuild/rpmbuild/BUILD [ 101s] + cd libsndfile-1.0.28 [ 101s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libsndfile-1.0.28-1.1.arm [ 101s] + exit 0 [ 101s] ... checking for files with abuild user/group [ 101s] ... creating baselibs [ 101s] no targets for arch armv7l, nothing to do [ 101s] [ 101s] obsnw20 finished "build libsndfile.spec" at Thu Oct 31 04:18:13 UTC 2019. [ 101s] Retried build at Thu Oct 31 04:35:38 2019 returned same result, skipped Retried build at Thu Oct 31 05:49:09 2019 returned same result, skipped Retried build at Thu Oct 31 11:21:13 2019 returned same result, skipped Retried build at Thu Nov 7 05:18:37 2019 returned same result, skipped Retried build at Sat Nov 9 00:54:06 2019 returned same result, skipped Retried build at Tue Dec 10 03:34:37 2019 returned same result, skipped Retried build at Fri Apr 3 16:03:17 2020 returned same result, skipped Retried build at Fri Apr 10 16:07:26 2020 returned same result, skipped Retried build at Fri May 8 17:46:09 2020 returned same result, skipped