[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obsnw02 started "build _service:gbs:xmlto.spec" at Thu Oct 31 11:21:36 UTC 2019. [ 1s] [ 1s] Building xmlto for project 'Tizen:5.5:Unified' repository 'standard' arch 'armv7l' srcmd5 'e7c4fa94be45b6e7f4f702d22592b659' [ 1s] [ 1s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:xmlto.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:xmlto.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:xmlto.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling libncurses... [ 2s] [3/40] preinstalling setup... [ 2s] [4/40] preinstalling filesystem... [ 2s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libelf... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/105] installing libmagic-data-5.37-1.46 [ 9s] [2/105] installing setup-0.9-1.2 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/105] installing filesystem-3.1-1.1 [ 9s] [4/105] installing glibc-2.24-1.22 [ 10s] [5/105] installing libatomic-6.2.1-1.3 [ 10s] [6/105] installing libgcc-6.2.1-1.3 [ 11s] [7/105] installing bash-3.2.57-1.1 [ 11s] [8/105] installing binutils-2.27-1.28 [ 11s] [9/105] installing cpio-2.11-1.1 [ 11s] [10/105] installing diffutils-3.3-1.1 [ 11s] [11/105] installing fdupes-1.40-1.76 [ 11s] [12/105] installing findutils-4.3.8-1.70 [ 11s] [13/105] installing gdbm-1.8.3-1.74 [ 12s] [14/105] installing hostname-3.20-1.1 [ 12s] [15/105] installing libattr-2.4.47-1.76 [ 12s] [16/105] installing libbz2-1.0.6-1.63 [ 13s] [17/105] installing libcap-2.24-1.75 [ 13s] [18/105] installing libelf-0.153-1.9 [ 13s] [19/105] installing libext2fs-1.43.4-1.1 [ 14s] [20/105] installing libfreebl3-3.34.1-1.42 [ 14s] [21/105] installing libgomp-6.2.1-1.3 [ 15s] [22/105] installing libgpg-error-1.27-1.1 [ 15s] [23/105] installing libitm-6.2.1-1.3 [ 15s] [24/105] installing libltdl-2.4.2-1.55 [ 16s] [25/105] installing liblua-5.1.5-1.2 [ 16s] [26/105] installing liblzma-5.2.4-1.53 [ 17s] [27/105] installing libpcre-8.43-1.3 [ 17s] [28/105] installing libpopt-1.16-1.4 [ 17s] [29/105] installing libsmack-1.3.1-1.2 [ 18s] [30/105] installing libsmartcols-2.30-1.1 [ 18s] [31/105] installing libsqlite-3.29.0-1.28 [ 18s] [32/105] installing libstdc++-6.2.1-1.3 [ 19s] [33/105] installing libuuid-2.30-1.1 [ 19s] [34/105] installing m4-1.4.17-1.1 [ 19s] [35/105] installing net-tools-2.0_20121208git-1.1 [ 19s] [36/105] installing nspr-4.12-1.2 [ 20s] [37/105] installing patch-2.7-1.4 [ 20s] [38/105] installing pkg-config-0.28-1.66 [ 20s] [39/105] installing sed-4.1c-1.1 [ 20s] [40/105] installing update-alternatives-1.18.15-1.1 [ 20s] [41/105] installing which-2.20-1.1 [ 20s] [42/105] installing zlib-1.2.11-1.73 [ 21s] [43/105] installing build-compare-2015.04.28-1.17 [ 21s] [44/105] installing libstdc++-devel-6.2.1-1.3 [ 21s] [45/105] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 22s] [46/105] installing terminfo-base-full-6.1-1.40 [ 23s] [47/105] installing cpp-6.2.1-1.3 [ 23s] [48/105] installing gcc-c++-6.2.1-1.3 [ 24s] [49/105] installing coreutils-6.9-1.5 [ 24s] [50/105] installing db4-4.8.30.NC-1.67 [ 25s] [51/105] installing flex-2.6.4-1.7 [ 25s] [52/105] installing gawk-3.1.5-1.1 [ 25s] [53/105] installing grep-2.5.2-1.1 [ 25s] [54/105] installing libacl-2.2.52-1.76 [ 25s] [55/105] installing libasm-0.153-1.9 [ 25s] [56/105] installing libblkid-2.30-1.1 [ 26s] [57/105] installing libcc1-6.2.1-1.3 [ 26s] [58/105] installing libgcrypt-1.8.3-1.1 [ 27s] [59/105] installing libgfortran-6.2.1-1.3 [ 27s] [60/105] installing libubsan-6.2.1-1.3 [ 27s] [61/105] installing make-4.0-1.7 [ 28s] [62/105] installing nss-certs-3.34.1-1.42 [ 28s] [63/105] installing smack-1.3.1-1.2 [ 28s] [64/105] installing bzip2-1.0.6-1.63 [ 28s] [65/105] installing libmagic-5.37-1.46 [ 28s] [66/105] installing libxml2-2.9.7-1.23 [ 29s] [67/105] installing xz-5.2.4-1.53 [ 29s] [68/105] installing libdw-0.153-1.9 [ 29s] [69/105] installing linux-glibc-devel-3.10-1.75 [ 30s] [70/105] installing file-5.37-1.46 [ 30s] [71/105] installing glibc-locale-2.24-1.22 [ 31s] [72/105] installing libmount-2.30-1.1 [ 31s] [73/105] installing tar-1.17-1.1 [ 31s] [74/105] installing gzip-1.3.12-1.77 [ 31s] [75/105] installing libfdisk-2.30-1.1 [ 32s] [76/105] installing libncurses6-6.1-1.40 [ 32s] [77/105] installing libxslt-1.1.31-1.1 [ 32s] [78/105] installing pam-1.1.6-1.1 [ 33s] [79/105] installing perl-5.30.0-1.10 [ 35s] [80/105] installing tzdata-2019a-1.1 [ 35s] [81/105] installing elfutils-0.153-1.9 [ 36s] [82/105] installing gcc-6.2.1-1.3 [ 37s] [83/105] installing build-mkbaselibs-20120927-1.1 [ 37s] [84/105] installing libncurses-6.1-1.40 [ 38s] [85/105] installing glibc-devel-2.24-1.22 [ 38s] [86/105] installing qemu-accel-x86_64-armv7l-0.4-1.2 [ 48s] [87/105] installing autoconf-2.69-1.25 [ 49s] [88/105] installing less-466-1.1 [ 49s] [89/105] installing libreadline-5.2-1.24 [ 49s] [90/105] installing procps-ng-3.3.15-1.1 [ 50s] [91/105] installing automake-1.15.1-1.46 [ 50s] [92/105] installing libxml2-tools-2.9.7-1.23 [ 50s] [93/105] installing build-20120927-1.1 [ 50s] [94/105] installing util-linux-2.30-1.1 [ 50s] [95/105] installing libtool-2.4.2-1.55 [ 50s] [96/105] installing sgml-skel-0.6-1.1 [ 50s] [97/105] installing util-linux-su-2.30-1.1 [ 51s] [98/105] installing iso_ent-2000.11.03-1.1 [ 51s] [99/105] installing xmlcharent-0.3-1.1 [ 52s] [100/105] installing docbook_4-4.5-1.1 [ 53s] [101/105] installing docbook-xsl-stylesheets-1.78.1-1.1 [ 54s] [102/105] installing nss-3.34.1-1.42 [ 54s] [103/105] installing libsoftokn3-3.34.1-1.42 [ 55s] [104/105] installing rpm-4.11.0.1-1.32 [ 55s] [105/105] installing rpm-build-4.11.0.1-1.32 [ 55s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 55s] now finalizing build dir... [ 56s] Running build time source services... [ 57s] build target is armv7l-tizen-linux [ 57s] ----------------------------------------------------------------- [ 57s] I have the following modifications for xmlto.spec: [ 57s] 4c4 [ 57s] < Release: 0 [ 57s] --- [ 57s] > Release: 1.1 [ 57s] ----------------------------------------------------------------- [ 57s] ----- building xmlto.spec (user abuild) [ 57s] ----------------------------------------------------------------- [ 57s] ----------------------------------------------------------------- [ 57s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:5.5:Unified/standard/e7c4fa94be45b6e7f4f702d22592b659-xmlto' -ba /home/abuild/rpmbuild/SOURCES/xmlto.spec [ 57s] Building target platforms: armv7l-tizen-linux [ 57s] Building for target armv7l-tizen-linux [ 57s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uOxCFN [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + rm -rf xmlto-0.0.25 [ 57s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/xmlto-0.0.25.tar.bz2 [ 57s] + /bin/tar -xf - [ 57s] + STATUS=0 [ 57s] + '[' 0 -ne 0 ']' [ 57s] + cd xmlto-0.0.25 [ 57s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 57s] + echo 'Patch #0 (0001-xmlto-nonvoid.patch):' [ 57s] Patch #0 (0001-xmlto-nonvoid.patch): [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-xmlto-nonvoid.patch [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] patching file xmlif/xmlif.c [ 57s] patching file xmlif/xmlif.l [ 57s] + echo 'Patch #1 (0002-xmlto-overflow.patch):' [ 57s] Patch #1 (0002-xmlto-overflow.patch): [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-xmlto-overflow.patch [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] patching file xmlif/xmlif.c [ 57s] + echo 'Patch #2 (0003-xmlto-xsltopts.patch):' [ 57s] Patch #2 (0003-xmlto-xsltopts.patch): [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-xmlto-xsltopts.patch [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] patching file xmlto.in [ 57s] + echo 'Patch #3 (0004-xmlto-codecleanup.patch):' [ 57s] Patch #3 (0004-xmlto-codecleanup.patch): [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-xmlto-codecleanup.patch [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] patching file xmlif/xmlif.l [ 57s] + echo 'Patch #4 (0005-xmlto-lynx-empty-file.patch):' [ 57s] Patch #4 (0005-xmlto-lynx-empty-file.patch): [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-xmlto-lynx-empty-file.patch [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] patching file xmlto.in [ 57s] + cp /home/abuild/rpmbuild/SOURCES/xmlto.manifest . [ 57s] + rm -f xmlif/xmlif.c [ 57s] + exit 0 [ 57s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.rqSN74 [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd xmlto-0.0.25 [ 57s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + LDFLAGS= [ 57s] + export LDFLAGS [ 57s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 58s] checking for a BSD-compatible install... /bin/install -c [ 59s] checking whether build environment is sane... yes [ 59s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 59s] checking for gawk... gawk [ 59s] checking whether make sets $(MAKE)... yes [ 59s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 59s] checking whether the C compiler works... yes [ 59s] checking for C compiler default output file name... a.out [ 59s] checking for suffix of executables... [ 59s] checking whether we are cross compiling... no [ 59s] checking for suffix of object files... o [ 59s] checking whether we are using the GNU C compiler... yes [ 59s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 59s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 59s] checking for style of include used by make... GNU [ 59s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 59s] checking whether armv7l-tizen-linux-gnueabi-gcc and cc understand -c and -o together... yes [ 59s] checking for flex... flex [ 60s] checking lex output file root... lex.yy [ 60s] checking lex library... -lfl [ 61s] checking whether yytext is a pointer... yes [ 61s] checking for mktemp... mktemp [ 61s] checking for find... find [ 61s] checking for bash... /bin/sh [ 61s] checking for getopt... getopt [ 61s] checking for long options support in getopt... yes [ 61s] checking for paperconf... paperconf [ 61s] checking for locale... /bin/locale [ 61s] checking for xmllint... /bin/xmllint [ 61s] checking for xsltproc... xsltproc [ 61s] checking for dblatex... dblatex [ 61s] checking for fop... fop [ 61s] checking for xmltex... xmltex [ 61s] checking for pdfxmltex... pdfxmltex [ 61s] checking for default backend... DEFAULT [ 61s] checking for lynx... lynx [ 61s] checking for links... links [ 61s] checking for w3m... w3m [ 61s] checking for tail... /bin/tail [ 61s] checking for grep... /bin/grep [ 61s] checking for cp... /bin/cp [ 61s] checking for zip... zip [ 61s] checking for default web browser... w3m [ 61s] configure: creating ./config.status [ 61s] config.status: creating Makefile [ 61s] config.status: creating xmlto [ 61s] config.status: creating xmlto.spec [ 61s] config.status: creating config.h [ 61s] config.status: executing depfiles commands [ 62s] + make -j4 [ 62s] make all-am [ 62s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 62s] /bin/sh ./ylwrap xmlif/xmlif.l lex.yy.c xmlif/xmlif.c -- flex [ 62s] depbase=`echo xmlif/xmlif.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ [ 62s] armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -MT xmlif/xmlif.o -MD -MP -MF $depbase.Tpo -c -o xmlif/xmlif.o xmlif/xmlif.c &&\ [ 62s] mv -f $depbase.Tpo $depbase.Po [ 62s] xmlif/xmlif.c:2004:16: warning: 'input' defined but not used [-Wunused-function] [ 62s] #else [ 62s] ^ [ 62s] xmlif/xmlif.c:1961:17: warning: 'yyunput' defined but not used [-Wunused-function] [ 62s] [ 62s] ^ [ 62s] armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o xmlif/xmlif xmlif/xmlif.o [ 62s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 62s] + exit 0 [ 62s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UkvxSC [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd xmlto-0.0.25 [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm [ 62s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm [ 62s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm install [ 62s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 62s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/bin" [ 62s] /bin/install -c xmlif/xmlif '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/bin' [ 62s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/bin" [ 62s] /bin/install -c xmlto '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/bin' [ 62s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/man/man1" [ 62s] /bin/install -c -m 644 man/man1/xmlto.1 man/man1/xmlif.1 '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/man/man1' [ 62s] test -z "/usr/share/xmlto" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto" [ 62s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook' [ 62s] /bin/install -c -m 644 format/docbook/dvi format/docbook/epub format/docbook/fo format/docbook/html format/docbook/html-nochunks format/docbook/xhtml format/docbook/xhtml-nochunks format/docbook/man format/docbook/pdf format/docbook/ps format/docbook/txt format/docbook/htmlhelp format/docbook/javahelp format/docbook/mif format/docbook/pcl format/docbook/svg format/docbook/awt '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook' [ 62s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1' [ 62s] /bin/install -c -m 644 format/xhtml1/dvi format/xhtml1/fo format/xhtml1/pdf format/xhtml1/ps format/xhtml1/txt format/xhtml1/awt format/xhtml1/mif format/xhtml1/pcl format/xhtml1/svg '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1' [ 62s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/fo' [ 62s] /bin/install -c -m 644 format/fo/ps format/fo/awt format/fo/mif format/fo/pcl format/fo/svg format/fo/txt format/fo/dvi format/fo/pdf '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/fo' [ 62s] /bin/install -c -m 644 xmlto.mak '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/.' [ 62s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 62s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/info/dir [ 62s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm -regex '.*\.la$' [ 62s] + xargs rm -f -- [ 62s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm -regex '.*\.a$' [ 62s] + xargs rm -f -- [ 62s] + mkdir /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/xsl [ 62s] + _target= [ 62s] + _symlinks=0 [ 62s] + _files=() [ 62s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto [ 62s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/awt [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/mif [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z [ 63s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/awt [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/mif [ 63s] ++ sort [ 63s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/awt [ 63s] ++ seq 1 1 [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/mif [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/mif [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/mif [ 63s] + _files=() [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/ps [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/dvi [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pdf [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z [ 63s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/ps [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/dvi [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pdf [ 63s] ++ sort [ 63s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/dvi [ 63s] ++ seq 1 2 [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pdf [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pdf [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pdf [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/ps [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/ps [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/ps [ 63s] + _files=() [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/svg [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pcl [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z [ 63s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/svg [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pcl [ 63s] ++ sort [ 63s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pcl [ 63s] ++ seq 1 1 [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/svg [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/svg [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/xhtml1/svg [ 63s] + _files=() [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/awt [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/mif [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z [ 63s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/awt [ 63s] ++ sort [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/mif [ 63s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/awt [ 63s] ++ seq 1 1 [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/mif [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/mif [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/mif [ 63s] + _files=() [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/ps [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pdf [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z [ 63s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/ps [ 63s] ++ sort [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pdf [ 63s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pdf [ 63s] ++ seq 1 1 [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/ps [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/ps [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pdf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/ps [ 63s] + _files=() [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/svg [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pcl [ 63s] + _files+=($_file) [ 63s] + read _file [ 63s] + test -z [ 63s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 63s] ++ sort [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/svg [ 63s] ++ for i in '${_files[*]}' [ 63s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pcl [ 63s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pcl [ 63s] ++ seq 1 1 [ 63s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 63s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/svg [ 63s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/svg [ 63s] + test 0 = 1 [ 63s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/xmlto/format/docbook/svg [ 63s] + _files=() [ 63s] + read _file [ 63s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlto-0.0.25 [ 63s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/bin/xmlif [ 64s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 64s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 64s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 64s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 64s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 64s] cpio: xmlto-0.0.25/xmlif.l: Cannot stat: No such file or directory [ 64s] 184 blocks [ 64s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlto-0.0.25/xmlto-debuginfo.manifest [ 64s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlto-0.0.25/xmlto-debugsource.manifest [ 64s] + /usr/lib/rpm/check-buildroot [ 64s] + /usr/lib/rpm//brp-compress [ 64s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 64s] + /usr/lib/rpm/brp-python-hardlink [ 64s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm [ 64s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.7n2oUh [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd xmlto-0.0.25 [ 64s] + make check [ 64s] make check-TESTS [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 65s] PASS: xmlif/test/run-test [ 65s] ============= [ 65s] 1 test passed [ 65s] ============= [ 65s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 65s] + exit 0 [ 65s] Processing files: xmlto-0.0.25-1.1.armv7l [ 65s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 65s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 65s] [ 65s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.BQzWxY [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd xmlto-0.0.25 [ 65s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/doc/packages/xmlto [ 65s] + export DOCDIR [ 65s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/doc/packages/xmlto [ 65s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm/usr/share/doc/packages/xmlto [ 65s] + exit 0 [ 65s] Provides: xmlto = 0.0.25-1.1 xmlto(armv7l-32) = 0.0.25-1.1 [ 65s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 65s] Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 65s] Processing files: xmlto-debugsource-0.0.25-1.1.armv7l [ 65s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 65s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 65s] [ 65s] Provides: xmlto-debugsource = 0.0.25-1.1 xmlto-debugsource(armv7l-32) = 0.0.25-1.1 [ 65s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 65s] Processing files: xmlto-debuginfo-0.0.25-1.1.armv7l [ 65s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 65s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 65s] [ 65s] Provides: xmlto-debuginfo = 0.0.25-1.1 xmlto-debuginfo(armv7l-32) = 0.0.25-1.1 [ 65s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 65s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm [ 65s] warning: Could not canonicalize hostname: obsnw02 [ 65s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlto-0.0.25-1.1.src.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlto-0.0.25-1.1.armv7l.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlto-debugsource-0.0.25-1.1.armv7l.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlto-debuginfo-0.0.25-1.1.armv7l.rpm [ 66s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.BlT1Jy [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd xmlto-0.0.25 [ 66s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-1.1.arm [ 66s] + exit 0 [ 66s] ... checking for files with abuild user/group [ 66s] ... creating baselibs [ 67s] [ 67s] obsnw02 finished "build xmlto.spec" at Thu Oct 31 11:22:42 UTC 2019. [ 67s] Retried build at Sat Nov 9 00:53:07 2019 returned same result, skipped Retried build at Mon Nov 18 23:46:52 2019 returned same result, skipped Retried build at Tue Dec 10 03:34:50 2019 returned same result, skipped Retried build at Fri Apr 3 16:02:40 2020 returned same result, skipped Retried build at Fri Apr 10 16:06:38 2020 returned same result, skipped Retried build at Fri May 8 17:46:11 2020 returned same result, skipped