[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw04 started "build _service:gbs:dpm-usb.spec" at Wed Nov 4 05:31:52 UTC 2020. [ 0s] [ 0s] Building dpm-usb for project 'Tizen:6.0:Unified:Hotfix' repository 'standard' arch 'armv7l' srcmd5 '149693d4666aae80fca2a4972eedbc0d' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:dpm-usb.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:dpm-usb.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:dpm-usb.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libblkid... [ 2s] [12/40] preinstalling libbz2... [ 2s] [13/40] preinstalling libcap... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 9s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [27/40] preinstalling coreutils... [ 10s] [28/40] preinstalling libacl... [ 10s] [29/40] preinstalling libelf... [ 10s] [30/40] preinstalling libmount... [ 10s] [31/40] preinstalling smack... [ 10s] [32/40] preinstalling bzip2... [ 10s] [33/40] preinstalling libmagic... [ 10s] [34/40] preinstalling libxml2... [ 10s] [35/40] preinstalling tar... [ 10s] [36/40] preinstalling util-linux... [ 10s] [37/40] preinstalling util-linux-su... [ 10s] [38/40] preinstalling nss... [ 10s] [39/40] preinstalling libsoftokn3... [ 10s] [40/40] preinstalling rpm... [ 10s] [ 17s] running qemu-linux-user-x86_64-cross postinstall script [ 18s] running qemu-accel-x86_64-armv7l postinstall script [ 18s] running setup postinstall script [ 18s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 18s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 18s] initializing rpm db... [ 19s] reordering...cycle: gio-branding-upstream -> libgio [ 19s] breaking dependency libgio -> gio-branding-upstream [ 19s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 19s] breaking dependency pkgmgr-info-parser -> pkgmgr-info [ 19s] cycle: libsoftokn3 -> nss [ 19s] breaking dependency nss -> libsoftokn3 [ 19s] done [ 20s] [1/168] installing default-ac-domains-0.1-1.1 [ 21s] [2/168] installing dlog-config-persistent-logs-6.0.16-1.3 [ 21s] [3/168] installing libmagic-data-5.37-1.50 [ 21s] [4/168] installing setup-0.9-1.1 [ 21s] warning: /etc/profile created as /etc/profile.rpmnew [ 21s] [5/168] installing filesystem-3.1-1.1 [ 21s] [6/168] installing glibc-2.30-1.16 [ 21s] [7/168] installing libatomic-9.2.0-1.11 [ 22s] [8/168] installing libgcc-9.2.0-1.11 [ 22s] [9/168] installing bash-3.2.57-1.1 [ 22s] [10/168] installing capi-base-common-0.4.59-2.1 [ 22s] [11/168] installing cpio-2.11-1.1 [ 22s] [12/168] installing diffutils-3.3-1.1 [ 22s] [13/168] installing findutils-4.3.8-1.74 [ 22s] [14/168] installing gdbm-1.8.3-1.79 [ 23s] [15/168] installing hostname-3.23-1.1 [ 23s] [16/168] installing iniparser-4.1-2.1 [ 23s] [17/168] installing libattr-2.4.47-1.81 [ 23s] [18/168] installing libblkid-2.34-1.1 [ 24s] [19/168] installing libbz2-1.0.8-1.73 [ 24s] [20/168] installing libcap-2.24-1.69 [ 24s] [21/168] installing libexpat-2.2.9-1.1 [ 24s] [22/168] installing libext2fs-1.43.4-1.1 [ 25s] [23/168] installing libffi-3.1-1.74 [ 25s] [24/168] installing libfreebl3-3.34.1-1.44 [ 25s] [25/168] installing libgfortran-9.2.0-1.11 [ 26s] [26/168] installing libgomp-9.2.0-1.11 [ 26s] [27/168] installing libitm-9.2.0-1.11 [ 26s] [28/168] installing libltdl-2.4.2-1.55 [ 27s] [29/168] installing liblua-5.1.5-1.26 [ 27s] [30/168] installing liblzma-5.2.4-1.50 [ 27s] [31/168] installing libopenssl11-1.1.1g-1.34 [ 28s] [32/168] installing libpcre-8.43-1.2 [ 28s] [33/168] installing libpopt-1.16-1.76 [ 28s] [34/168] installing libpython3_7m1_0-3.7.3-1.31 [ 29s] [35/168] installing libsmack-1.3.1-1.69 [ 29s] [36/168] installing libsmartcols-2.34-1.1 [ 29s] [37/168] installing libsqlite-3.31.1-1.61 [ 30s] [38/168] installing libstdc++-9.2.0-1.11 [ 30s] [39/168] installing libuuid-2.34-1.1 [ 30s] [40/168] installing m4-1.4.17-1.1 [ 30s] [41/168] installing net-tools-2.0_20121208git-1.1 [ 30s] [42/168] installing nspr-4.12-1.76 [ 31s] [43/168] installing patch-2.7-1.75 [ 31s] [44/168] installing pkg-config-0.28-1.64 [ 32s] [45/168] installing sed-4.1c-1.1 [ 32s] [46/168] installing update-alternatives-1.18.15-1.1 [ 32s] [47/168] installing which-2.20-1.1 [ 32s] [48/168] installing xdgmime-0.0.14-1.1 [ 32s] [49/168] installing zlib-1.2.11-1.74 [ 32s] [50/168] installing shadow-utils-4.1.4.2-1.3 [ 32s] [51/168] installing build-compare-2015.04.28-1.16 [ 32s] [52/168] installing libstdc++-devel-9.2.0-1.11 [ 33s] [53/168] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 34s] [54/168] installing terminfo-base-full-6.1_20191207-1.48 [ 34s] [55/168] installing vconf-internal-keys-devel-0.0.176-1.1 [ 34s] [56/168] installing capi-base-common-devel-0.4.59-2.1 [ 35s] [57/168] installing cpp-9.2.0-1.11 [ 35s] [58/168] installing gcc-c++-9.2.0-1.11 [ 36s] [59/168] installing libblkid-devel-2.34-1.1 [ 36s] [60/168] installing libffi-devel-3.1-1.74 [ 36s] [61/168] installing xdgmime-devel-0.0.14-1.1 [ 36s] [62/168] installing binutils-2.33.1-1.29 [ 37s] [63/168] installing coreutils-6.9-1.9 [ 37s] [64/168] installing gawk-3.1.5-1.1 [ 37s] [65/168] installing grep-2.5.2-1.1 [ 37s] [66/168] installing libacl-2.2.52-1.80 [ 38s] [67/168] installing libcap-tools-2.24-1.69 [ 38s] [68/168] installing libcc1-9.2.0-1.11 [ 38s] [69/168] installing libelf-0.178-1.7 [ 38s] [70/168] installing libglib-2.62.3-1.2 [ 39s] [71/168] installing libmount-2.34-1.1 [ 39s] [72/168] installing libpcreposix-8.43-1.2 [ 39s] [73/168] installing libubsan-9.2.0-1.11 [ 40s] [74/168] installing make-4.0-1.7 [ 40s] [75/168] installing minizip-1.2.11-1.74 [ 40s] [76/168] installing nss-certs-3.34.1-1.44 [ 40s] [77/168] installing smack-1.3.1-1.69 [ 41s] [78/168] installing sqlite-3.31.1-1.61 [ 41s] [79/168] installing bzip2-1.0.8-1.73 [ 41s] [80/168] installing dlog-common-6.0.16-1.3 [ 41s] [81/168] installing gettext-runtime-0.19.8.1-1.10 [ 41s] [82/168] installing libfdisk-2.34-1.1 [ 42s] [83/168] installing libmagic-5.37-1.50 [ 42s] [84/168] installing libpcrecpp-8.43-1.2 [ 42s] [85/168] installing libxml2-2.9.10-1.18 [ 43s] [86/168] installing perl-5.30.0-1.26 [ 45s] [87/168] installing xz-5.2.4-1.50 [ 45s] [88/168] installing cynara-db-migration-0.16.0-1.1 [ 45s] [89/168] installing ttrace-1.0.3-1.2 [ 46s] [90/168] installing python3-base-3.7.3-1.31 [ 47s] [91/168] installing build-mkbaselibs-20120927-1.1 [ 47s] [92/168] installing linux-glibc-devel-3.10-1.72 [ 47s] [93/168] installing autoconf-2.69-1.30 [ 47s] [94/168] installing dlog-logger-6.0.16-1.3 [ 47s] [95/168] installing file-5.37-1.50 [ 47s] [96/168] installing glibc-locale-2.30-1.16 [ 48s] [97/168] installing libgmodule-2.62.3-1.2 [ 49s] [98/168] installing libgthread-2.62.3-1.2 [ 49s] [99/168] installing libmount-devel-2.34-1.1 [ 49s] [100/168] installing tar-1.17-1.1 [ 50s] [101/168] installing tizen-platform-config-5.0-1.1 [ 51s] [102/168] installing gzip-1.3.12-1.77 [ 51s] [103/168] installing libgobject-2.62.3-1.2 [ 51s] [104/168] installing libncurses6-6.1_20191207-1.48 [ 51s] [105/168] installing pam-1.1.6-1.1 [ 52s] [106/168] installing tzdata-2019c-1.1 [ 52s] [107/168] installing libdw-0.178-1.7 [ 52s] [108/168] installing pcre-devel-8.43-1.2 [ 53s] [109/168] installing security-config-1.0-1.1 [ 60s] groupadd: group 'dbus' already exists [ 60s] groupadd: group 'priv_appdebugging' already exists [ 60s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 60s] [110/168] installing gettext-tools-0.19.8.1-1.10 [ 61s] [111/168] installing libarchive-3.4.0-1.1 [ 61s] [112/168] installing shared-mime-info-1.7-1.1 [ 71s] [113/168] installing gcc-9.2.0-1.11 [ 71s] [114/168] installing libncurses-6.1_20191207-1.48 [ 71s] [115/168] installing glibc-devel-2.30-1.16 [ 71s] [116/168] installing qemu-accel-x86_64-armv7l-0.4-1.1 [ 79s] [117/168] installing automake-1.15.1-1.37 [ 80s] [118/168] installing less-466-1.1 [ 80s] [119/168] installing libreadline-5.2-1.21 [ 80s] [120/168] installing libtzplatform-config-5.0-1.1 [ 80s] [121/168] installing procps-ng-3.3.15-1.1 [ 81s] [122/168] installing libasm-0.178-1.7 [ 81s] [123/168] installing build-20120927-1.1 [ 81s] [124/168] installing libsystemd-244-1.1 [ 81s] [125/168] installing cmake-3.9.4-1.1 [ 82s] [126/168] installing libdlog-6.0.16-1.3 [ 82s] [127/168] installing libtzplatform-config-devel-5.0-1.1 [ 82s] [128/168] installing libdlog-devel-6.0.16-1.3 [ 82s] [129/168] installing zlib-devel-1.2.11-1.74 [ 82s] [130/168] installing libtool-2.4.2-1.55 [ 82s] [131/168] installing sqlite-devel-3.31.1-1.61 [ 82s] [132/168] installing elfutils-0.178-1.7 [ 82s] [133/168] installing python3-3.7.3-1.1 [ 82s] [134/168] installing libcynara-commons-0.16.0-1.1 [ 83s] [135/168] installing capi-system-info-0.5.2-2.1 [ 84s] Running capi-system-info %posttrans script [ 84s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 84s] iniparser: cannot open /etc/info.ini [ 84s] [136/168] installing util-linux-2.34-1.1 [ 84s] [137/168] installing capi-system-info-devel-0.5.2-2.1 [ 84s] [138/168] installing pkgmgr-0.12.6-1.1 [ 84s] Running pkgmgr %posttrans script [ 84s] /var/tmp/rpm-tmp.9UQtqY: line 4: pkg_initdb: command not found [ 84s] /var/tmp/rpm-tmp.9UQtqY: line 5: install_preload_pkg: command not found [ 84s] /var/tmp/rpm-tmp.9UQtqY: line 12: pkgcmd: command not found [ 84s] /var/tmp/rpm-tmp.9UQtqY: line 14: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 84s] [139/168] installing libcynara-client-0.16.0-1.1 [ 85s] [140/168] installing util-linux-su-2.34-1.1 [ 85s] [141/168] installing pkgmgr-types-devel-0.12.6-1.1 [ 85s] [142/168] installing nss-3.34.1-1.44 [ 85s] [143/168] installing libgio-2.62.3-1.2 [ 86s] [144/168] installing gio-branding-upstream-2.62.3-1.2 [ 86s] [145/168] installing libjson-glib-1.4.4-2.1 [ 86s] [146/168] installing libsoftokn3-3.34.1-1.44 [ 86s] [147/168] installing glib2-tools-2.62.3-1.2 [ 86s] [148/168] installing klay-0.0.2-1.2 [ 87s] [149/168] installing pkgmgr-info-parser-0.18.3-1.1 [ 87s] [150/168] installing rpm-4.11.0.1-1.42 [ 88s] [151/168] installing buxton2-1.6.1-1.1 [ 88s] Running buxton2 %posttrans script [ 88s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 88s] /etc/buxton2/*: No such file or directory [ 88s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 88s] /var/lib/buxton2/*: No such file or directory [ 88s] [152/168] installing vconf-compat-1.6.1-1.1 [ 89s] [153/168] installing bundle-0.5.4-1.1 [ 89s] [154/168] installing rpm-build-4.11.0.1-1.42 [ 89s] [155/168] installing glib2-devel-2.62.3-1.2 [ 89s] [156/168] installing bundle-devel-0.5.4-1.1 [ 89s] [157/168] installing klay-devel-0.0.2-1.2 [ 89s] [158/168] installing vconf-compat-devel-1.6.1-1.1 [ 89s] [159/168] installing libstorage-1.0.0-1.1 [ 90s] [160/168] installing pkgmgr-info-0.18.3-1.1 [ 90s] [161/168] installing pkgmgr-info-devel-0.18.3-1.1 [ 90s] [162/168] installing pkgmgr-installer-0.12.6-1.1 [ 90s] [163/168] installing pkgmgr-client-0.12.6-1.1 [ 90s] [164/168] installing pkgmgr-client-devel-0.12.6-1.1 [ 91s] [165/168] installing aul-0.28.1-2.2 [ 91s] [166/168] installing aul-devel-0.28.1-2.2 [ 91s] [167/168] installing device-policy-manager-1.0.1-1.1 [ 92s] [168/168] installing device-policy-manager-devel-1.0.1-1.1 [ 92s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 92s] now finalizing build dir... [ 92s] Running build time source services... [ 93s] build target is armv7l-tizen-linux [ 93s] ----------------------------------------------------------------- [ 93s] I have the following modifications for dpm-usb.spec: [ 93s] 4c4 [ 93s] < Release: 0 [ 93s] --- [ 93s] > Release: 1.2 [ 93s] ----------------------------------------------------------------- [ 93s] ----- building dpm-usb.spec (user abuild) [ 93s] ----------------------------------------------------------------- [ 93s] ----------------------------------------------------------------- [ 93s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.0:Unified:Hotfix/standard/149693d4666aae80fca2a4972eedbc0d-dpm-usb' -ba /home/abuild/rpmbuild/SOURCES/dpm-usb.spec [ 93s] Building target platforms: armv7l-tizen-linux [ 93s] Building for target armv7l-tizen-linux [ 93s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.fuay8h [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + rm -rf dpm-usb-1.0.1 [ 93s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dpm-usb-1.0.1.tar.gz [ 93s] + /bin/tar -xf - [ 93s] + STATUS=0 [ 93s] + '[' 0 -ne 0 ']' [ 93s] + cd dpm-usb-1.0.1 [ 93s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 93s] + exit 0 [ 93s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.OmzFJh [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd dpm-usb-1.0.1 [ 93s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 93s] + LANG=C [ 93s] + export LANG [ 93s] + unset DISPLAY [ 93s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 93s] + export CXXFLAGS [ 93s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 93s] + export FFLAGS [ 93s] + LDFLAGS= [ 93s] + export LDFLAGS [ 93s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 93s] + export CXXFLAGS [ 93s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 93s] + export FFLAGS [ 93s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DVERSION=1.0.1 -DCMAKE_BUILD_TYPE=RELEASE -DPLUGIN_INSTALL_DIR=/usr/lib/dpm/plugins '-DSCRIPT_INSTALL_DIR=%{_scriptdir}' -DSYSTEMD_UNIT_INSTALL_DIR=/usr/lib/systemd/system -DDATA_INSTALL_DIR=/opt/data/dpm -DDB_INSTALL_DIR=/opt/dbspace -DRUN_INSTALL_DIR=/run -DAPP_INSTALL_PREFIX=/usr/apps -DAPP_SHARE_PACKAGES_DIR=/usr/share/packages [ 93s] -- The C compiler identification is GNU 9.2.0 [ 93s] -- The CXX compiler identification is GNU 9.2.0 [ 93s] -- Check for working C compiler: /bin/cc [ 93s] -- Check for working C compiler: /bin/cc -- works [ 93s] -- Detecting C compiler ABI info [ 93s] -- Detecting C compiler ABI info - done [ 93s] -- Detecting C compile features [ 94s] -- Detecting C compile features - done [ 94s] -- Check for working CXX compiler: /bin/c++ [ 94s] -- Check for working CXX compiler: /bin/c++ -- works [ 94s] -- Detecting CXX compiler ABI info [ 94s] -- Detecting CXX compiler ABI info - done [ 94s] -- Detecting CXX compile features [ 94s] -- Detecting CXX compile features - done [ 94s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 94s] -- Checking for modules 'klay;dpm-pil' [ 94s] -- Found klay, version 0.0.2 [ 94s] -- Found dpm-pil, version 1.0.1 [ 95s] -- Checking for modules 'klay;dpm-pil;capi-base-common;capi-system-info' [ 95s] -- Found klay, version 0.0.2 [ 95s] -- Found dpm-pil, version 1.0.1 [ 95s] -- Found capi-base-common, version 0.4.59 [ 96s] -- Found capi-system-info, version 0.2.0 [ 96s] -- Configuring done [ 96s] -- Generating done [ 96s] CMake Warning: [ 96s] Manually-specified variables were not used by the project: [ 96s] [ 96s] APP_INSTALL_PREFIX [ 96s] APP_SHARE_PACKAGES_DIR [ 96s] CMAKE_INSTALL_LIBDIR [ 96s] DATA_INSTALL_DIR [ 96s] DB_INSTALL_DIR [ 96s] RUN_INSTALL_DIR [ 96s] SCRIPT_INSTALL_DIR [ 96s] SHARE_INSTALL_PREFIX [ 96s] SYSTEMD_UNIT_INSTALL_DIR [ 96s] [ 96s] [ 96s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 [ 96s] + make -j4 [ 96s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 -B/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 96s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/CMakeFiles/progress.marks [ 96s] make -f CMakeFiles/Makefile2 all [ 96s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] make -f plugin/CMakeFiles/dpm-plugin-usb.dir/build.make plugin/CMakeFiles/dpm-plugin-usb.dir/depend [ 96s] make -f api/CMakeFiles/dpm-usb.dir/build.make api/CMakeFiles/dpm-usb.dir/depend [ 96s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin/CMakeFiles/dpm-plugin-usb.dir/DependInfo.cmake --color= [ 96s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api/CMakeFiles/dpm-usb.dir/DependInfo.cmake --color= [ 96s] Scanning dependencies of target dpm-usb [ 96s] Scanning dependencies of target dpm-plugin-usb [ 96s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] make -f api/CMakeFiles/dpm-usb.dir/build.make api/CMakeFiles/dpm-usb.dir/build [ 96s] make -f plugin/CMakeFiles/dpm-plugin-usb.dir/build.make plugin/CMakeFiles/dpm-plugin-usb.dir/build [ 96s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 96s] [ 25%] Building CXX object api/CMakeFiles/dpm-usb.dir/usb.cpp.o [ 96s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api && /bin/c++ -DUG_WAYLAND -Ddpm_usb_EXPORTS -isystem /usr/include/klay -isystem /usr/include/glib-2.0 -isystem /usr/lib/glib-2.0/include -isystem /usr/include/dpm/pil -isystem /usr/include/aul -isystem /usr/include/aul/api -isystem /usr/include/vconf -isystem /usr/include/dlog -isystem /usr/include/system -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fPIC -Werror -Wall -Wl,--as-needed -Wl,--no-whole-archive -O2 -DNDEBUG -std=c++11 -fno-rtti -fPIC -fvisibility=default -o CMakeFiles/dpm-usb.dir/usb.cpp.o -c /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api/usb.cpp [ 96s] [ 50%] Building CXX object plugin/CMakeFiles/dpm-plugin-usb.dir/usb.cpp.o [ 96s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin && /bin/c++ -DUG_WAYLAND -Ddpm_plugin_usb_EXPORTS -isystem /usr/include/klay -isystem /usr/include/glib-2.0 -isystem /usr/lib/glib-2.0/include -isystem /usr/include/dpm/pil -isystem /usr/include/aul -isystem /usr/include/aul/api -isystem /usr/include/vconf -isystem /usr/include/dlog -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fPIC -Werror -Wall -Wl,--as-needed -Wl,--no-whole-archive -O2 -DNDEBUG -std=c++11 -fno-rtti -fPIC -fvisibility=default -o CMakeFiles/dpm-plugin-usb.dir/usb.cpp.o -c /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin/usb.cpp [ 97s] [ 75%] Linking CXX shared library libdpm-usb.so [ 97s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api && /usr/bin/cmake -E cmake_link_script CMakeFiles/dpm-usb.dir/link.txt --verbose=1 [ 97s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fPIC -Werror -Wall -Wl,--as-needed -Wl,--no-whole-archive -O2 -DNDEBUG -std=c++11 -fno-rtti -Wl,-z,noexecstack -shared -Wl,-soname,libdpm-usb.so.0 -o libdpm-usb.so.1.0.1 CMakeFiles/dpm-usb.dir/usb.cpp.o -lklay -ldpm-pil -lsqlite3 -ltzplatform-config-2.0 -laul -lbundle -lxdgmime -lvconf -ldlog -lpkgmgr-client -lpkgmgr-info -lglib-2.0 -lcapi-system-info -lcapi-base-common -lpthread [ 97s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api && /usr/bin/cmake -E cmake_symlink_library libdpm-usb.so.1.0.1 libdpm-usb.so.0 libdpm-usb.so [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 97s] [ 75%] Built target dpm-usb [ 98s] [100%] Linking CXX shared library libdpm-plugin-usb.so [ 98s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin && /usr/bin/cmake -E cmake_link_script CMakeFiles/dpm-plugin-usb.dir/link.txt --verbose=1 [ 98s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -fPIC -Werror -Wall -Wl,--as-needed -Wl,--no-whole-archive -O2 -DNDEBUG -std=c++11 -fno-rtti -Wl,-z,noexecstack -shared -Wl,-soname,libdpm-plugin-usb.so -o libdpm-plugin-usb.so CMakeFiles/dpm-plugin-usb.dir/usb.cpp.o -lklay -ldpm-pil -lsqlite3 -ltzplatform-config-2.0 -laul -lbundle -lcapi-base-common -lxdgmime -lvconf -ldlog -lpkgmgr-client -lpkgmgr-info -lglib-2.0 [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 98s] [100%] Built target dpm-plugin-usb [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 98s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/CMakeFiles 0 [ 98s] + exit 0 [ 98s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JNuVIk [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd dpm-usb-1.0.1 [ 98s] + LANG=C [ 98s] + export LANG [ 98s] + unset DISPLAY [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm [ 98s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm [ 98s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm install [ 98s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 -B/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 98s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/CMakeFiles/progress.marks [ 98s] /bin/make -f CMakeFiles/Makefile2 all [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 98s] /bin/make -f plugin/CMakeFiles/dpm-plugin-usb.dir/build.make plugin/CMakeFiles/dpm-plugin-usb.dir/depend [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 98s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/plugin/CMakeFiles/dpm-plugin-usb.dir/DependInfo.cmake --color= [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 98s] /bin/make -f plugin/CMakeFiles/dpm-plugin-usb.dir/build.make plugin/CMakeFiles/dpm-plugin-usb.dir/build [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 98s] make[2]: Nothing to be done for 'plugin/CMakeFiles/dpm-plugin-usb.dir/build'. [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] [ 50%] Built target dpm-plugin-usb [ 99s] /bin/make -f api/CMakeFiles/dpm-usb.dir/build.make api/CMakeFiles/dpm-usb.dir/depend [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] cd /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/api/CMakeFiles/dpm-usb.dir/DependInfo.cmake --color= [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] /bin/make -f api/CMakeFiles/dpm-usb.dir/build.make api/CMakeFiles/dpm-usb.dir/build [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] make[2]: Nothing to be done for 'api/CMakeFiles/dpm-usb.dir/build'. [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] [100%] Built target dpm-usb [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/CMakeFiles 0 [ 99s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] make[1]: Nothing to be done for 'preinstall'. [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1' [ 99s] Install the project... [ 99s] /usr/bin/cmake -P cmake_install.cmake [ 99s] -- Install configuration: "RELEASE" [ 99s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/lib/dpm/plugins/usb [ 99s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/lib/pkgconfig/dpm-usb.pc [ 99s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/lib/libdpm-usb.so.1.0.1 [ 99s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/lib/libdpm-usb.so.0 [ 99s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/lib/libdpm-usb.so [ 99s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/include/dpm/usb.h [ 99s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/share/info/dir [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm -regex '.*\.la$' [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm -regex '.*\.a$' [ 99s] + xargs rm -f -- [ 99s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1 [ 99s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm/usr/lib/libdpm-usb.so.1.0.1 [ 99s] 5 blocks [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/dpm-usb-debuginfo.manifest [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dpm-usb-1.0.1/dpm-usb-debugsource.manifest [ 99s] + /usr/lib/rpm/check-buildroot [ 99s] + /usr/lib/rpm//brp-compress [ 99s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 99s] + /usr/lib/rpm/brp-python-hardlink [ 99s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm [ 99s] Processing files: dpm-usb-1.0.1-1.2.armv7l [ 99s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 99s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 99s] [ 99s] Provides: dpm-usb = 1.0.1-1.2 dpm-usb(armv7l-32) = 1.0.1-1.2 libdpm-plugin-usb.so libdpm-usb.so.0 [ 99s] Requires(interp): /bin/sh /bin/sh /bin/sh [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires(post): /bin/sh [ 99s] Requires(preun): /bin/sh [ 99s] Requires(postun): /bin/sh [ 99s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdpm-pil.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libklay.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.5) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.11) libstdc++.so.6(GLIBCXX_3.4.14) libstdc++.so.6(GLIBCXX_3.4.18) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.26) rtld(GNU_HASH) [ 99s] Processing files: dpm-usb-debugsource-1.0.1-1.2.armv7l [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: dpm-usb-debugsource = 1.0.1-1.2 dpm-usb-debugsource(armv7l-32) = 1.0.1-1.2 [ 99s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 99s] Processing files: libdpm-usb-devel-1.0.1-1.2.armv7l [ 99s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 99s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 99s] [ 99s] Provides: libdpm-usb-devel = 1.0.1-1.2 libdpm-usb-devel(armv7l-32) = 1.0.1-1.2 pkgconfig(dpm-usb) = 1.0.1 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires: /usr/bin/pkg-config libdpm-usb.so.0 [ 99s] Processing files: dpm-usb-debuginfo-1.0.1-1.2.armv7l [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: dpm-usb-debuginfo = 1.0.1-1.2 dpm-usb-debuginfo(armv7l-32) = 1.0.1-1.2 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm [ 99s] warning: Could not canonicalize hostname: obsnw04 [ 99s] Wrote: /home/abuild/rpmbuild/SRPMS/dpm-usb-1.0.1-1.2.src.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dpm-usb-1.0.1-1.2.armv7l.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dpm-usb-debugsource-1.0.1-1.2.armv7l.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdpm-usb-devel-1.0.1-1.2.armv7l.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dpm-usb-debuginfo-1.0.1-1.2.armv7l.rpm [ 100s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QIenri [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd dpm-usb-1.0.1 [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dpm-usb-1.0.1-1.2.arm [ 100s] + exit 0 [ 100s] ... checking for files with abuild user/group [ 100s] ... creating baselibs [ 100s] ... comparing built packages with the former built [ 100s] /usr/lib/build/pkg-diff.sh [ 100s] compare /.build.oldpackages/dpm-usb-1.0.1-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/dpm-usb-1.0.1-1.2.src.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 101s] comparing rpmtags [ 101s] comparing RELEASE [ 101s] comparing PROVIDES [ 101s] comparing scripts [ 101s] comparing filelist [ 101s] comparing file checksum [ 101s] RPM meta information is identical [ 101s] compare /.build.oldpackages/dpm-usb-1.0.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dpm-usb-1.0.1-1.2.armv7l.rpm [ 101s] Comparing dpm-usb-1.0.1-1.1.armv7l.rpm to dpm-usb-1.0.1-1.2.armv7l.rpm [ 101s] This is not a prerelease project. Compare the project name. [ 101s] comparing rpmtags [ 101s] comparing RELEASE [ 101s] comparing PROVIDES [ 101s] comparing scripts [ 101s] comparing filelist [ 101s] comparing file checksum [ 101s] creating rename script [ 101s] RPM file checksum differs. [ 101s] Extracting packages [ 102s] /usr/lib/dpm/plugins/usb differs in ELF section .comment [ 102s] --- /tmp/tmp.sgie113876/tmp.pNxJ114136 2020-11-04 05:33:34.040267542 +0000 [ 102s] +++ /tmp/tmp.sgie113876/tmp.ctws114147 2020-11-04 05:33:34.044267556 +0000 [ 102s] @@ -3,5 +3,5 @@ [ 102s] [ 102s] Contents of section .comment: [ 102s] 0000 4743433a 20285469 7a656e20 47434320 GCC: (Tizen GCC [ 102s] - 0010 392e322e 30203230 31393038 31322032 9.2.0 20190812 2 [ 102s] + 0010 392e322e 30203230 31393038 31322031 9.2.0 20190812 1 [ 102s] 0020 2e312920 392e322e 3000 .1) 9.2.0. [ 102s] compare /.build.oldpackages/dpm-usb-debuginfo-1.0.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dpm-usb-debuginfo-1.0.1-1.2.armv7l.rpm [ 102s] skipping -debuginfo package [ 102s] compare /.build.oldpackages/dpm-usb-debugsource-1.0.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dpm-usb-debugsource-1.0.1-1.2.armv7l.rpm [ 102s] Comparing dpm-usb-debugsource-1.0.1-1.1.armv7l.rpm to dpm-usb-debugsource-1.0.1-1.2.armv7l.rpm [ 102s] This is not a prerelease project. Compare the project name. [ 102s] comparing rpmtags [ 102s] comparing RELEASE [ 102s] comparing PROVIDES [ 102s] comparing scripts [ 102s] comparing filelist [ 102s] comparing file checksum [ 102s] creating rename script [ 102s] RPM meta information is identical [ 102s] compare /.build.oldpackages/libdpm-usb-devel-1.0.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libdpm-usb-devel-1.0.1-1.2.armv7l.rpm [ 102s] Comparing libdpm-usb-devel-1.0.1-1.1.armv7l.rpm to libdpm-usb-devel-1.0.1-1.2.armv7l.rpm [ 102s] This is not a prerelease project. Compare the project name. [ 102s] comparing rpmtags [ 103s] comparing RELEASE [ 103s] comparing PROVIDES [ 103s] comparing scripts [ 103s] comparing filelist [ 103s] comparing file checksum [ 103s] creating rename script [ 103s] RPM meta information is identical [ 103s] [ 103s] obsnw04 finished "build dpm-usb.spec" at Wed Nov 4 05:33:35 UTC 2020. [ 103s]