[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw02 started "build _service:gbs:pcre.spec" at Wed Apr 5 09:22:38 UTC 2023. [ 0s] [ 0s] Building pcre for project 'Tizen:Base:Tool' repository 'standard' arch 'armv7l' srcmd5 '0dddebcbfe0e4b7c52c58e3d7f30bcc8' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 9s] [34/41] preinstalling libmagic... [ 9s] [35/41] preinstalling libxml2... [ 9s] [36/41] preinstalling tar... [ 9s] [37/41] preinstalling util-linux... [ 9s] [38/41] preinstalling util-linux-su... [ 9s] [39/41] preinstalling nss... [ 9s] [40/41] preinstalling libsoftokn3... [ 9s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/96] installing libmagic-data-5.44-7.106 [ 10s] [2/96] installing setup-0.9-6.43 [ 10s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [3/96] installing filesystem-3.1-4.1 [ 10s] [4/96] installing glibc-2.30-19.20 [ 10s] [5/96] installing libatomic-9.2.0-18.70 [ 11s] [6/96] installing libgcc-9.2.0-18.70 [ 11s] [7/96] installing bash-3.2.57-8.1 [ 11s] [8/96] installing cpio-2.8-6.2 [ 11s] [9/96] installing diffutils-3.8-5.1 [ 11s] [10/96] installing findutils-4.3.8-6.129 [ 11s] [11/96] installing gdbm-1.8.3-4.141 [ 11s] [12/96] installing hostname-3.23-3.3 [ 12s] [13/96] installing libattr-2.5.1-5.539 [ 12s] [14/96] installing libblkid-2.37.4-14.4 [ 12s] [15/96] installing libbz2-1.0.8-5.414 [ 12s] [16/96] installing libcap-2.24-4.526 [ 13s] [17/96] installing libext2fs-1.46.0-4.86 [ 13s] [18/96] installing libfreebl3-3.87-5.46 [ 14s] [19/96] installing libgfortran-9.2.0-18.70 [ 14s] [20/96] installing libgomp-9.2.0-18.70 [ 14s] [21/96] installing libitm-9.2.0-18.70 [ 15s] [22/96] installing libltdl-2.4.7-6.87 [ 15s] [23/96] installing liblua-5.1.5-4.12 [ 15s] [24/96] installing liblzma-5.4.0-6.93 [ 16s] [25/96] installing libopenssl11-1.1.1t-12.1 [ 16s] [26/96] installing libpcre-8.45-5.41 [ 17s] [27/96] installing libpopt-1.16-3.789 [ 17s] [28/96] installing libsmack-1.3.1-4.518 [ 17s] [29/96] installing libsmartcols-2.37.4-14.4 [ 17s] [30/96] installing libsqlite-3.40.1-7.99 [ 18s] [31/96] installing libstdc++-9.2.0-18.70 [ 18s] [32/96] installing libuuid-2.37.4-14.4 [ 19s] [33/96] installing libzstd1-1.5.2-3.100 [ 19s] [34/96] installing m4-1.4.19-4.2 [ 19s] [35/96] installing net-tools-2.0_20121208git-5.1 [ 19s] [36/96] installing nspr-4.35-4.73 [ 19s] [37/96] installing patch-2.7.6-10.161 [ 19s] [38/96] installing pkg-config-0.29.2-4.210 [ 20s] [39/96] installing sed-4.1c-5.2 [ 20s] [40/96] installing update-alternatives-1.21.18-4.1 [ 20s] [41/96] installing which-2.17-4.4 [ 20s] [42/96] installing zlib-1.2.13-4.108 [ 20s] [43/96] installing build-compare-2015.04.28-3.305 [ 20s] [44/96] installing libstdc++-devel-9.2.0-18.70 [ 20s] [45/96] installing qemu-linux-user-x86_64-cross-5.2.0-2.1 [ 23s] [46/96] installing cpp-9.2.0-18.70 [ 24s] [47/96] installing gcc-c++-9.2.0-18.70 [ 25s] [48/96] installing binutils-2.33.1-10.123 [ 25s] [49/96] installing coreutils-6.9-6.45 [ 25s] [50/96] installing gawk-3.1.5-5.2 [ 25s] [51/96] installing grep-2.5.2-4.3 [ 25s] [52/96] installing libacl-2.2.53-4.751 [ 26s] [53/96] installing libcc1-9.2.0-18.70 [ 26s] [54/96] installing libelf-0.189-6.6 [ 26s] [55/96] installing libmount-2.37.4-14.4 [ 27s] [56/96] installing libubsan-9.2.0-18.70 [ 27s] [57/96] installing make-4.3-3.76 [ 27s] [58/96] installing nss-certs-3.87-5.46 [ 28s] [59/96] installing smack-1.3.1-4.518 [ 28s] [60/96] installing bzip2-1.0.8-5.414 [ 28s] [61/96] installing libfdisk-2.37.4-14.4 [ 28s] [62/96] installing libmagic-5.44-7.106 [ 28s] [63/96] installing libxml2-2.10.2-8.48 [ 29s] [64/96] installing perl-5.34.0-8.111 [ 31s] [65/96] installing xz-5.4.0-6.93 [ 31s] [66/96] installing build-mkbaselibs-20120927-3.3 [ 31s] [67/96] installing linux-glibc-devel-3.10-6.5 [ 31s] [68/96] installing terminfo-base-full-6.2-9.30 [ 32s] [69/96] installing autoconf-2.71-6.235 [ 32s] [70/96] installing file-5.44-7.106 [ 32s] [71/96] installing glibc-locale-2.30-19.20 [ 33s] [72/96] installing tar-1.17-4.2 [ 33s] [73/96] installing gzip-1.3.12-3.801 [ 33s] [74/96] installing pam-1.1.6-4.4 [ 33s] [75/96] installing tzdata-2022g-6.1 [ 34s] [76/96] installing libdw-0.189-6.6 [ 34s] [77/96] installing libarchive-3.6.2-6.14 [ 35s] [78/96] installing gcc-9.2.0-18.70 [ 35s] [79/96] installing glibc-devel-2.30-19.20 [ 35s] [80/96] installing qemu-accel-x86_64-armv7l-0.4-11.3 [ 43s] [81/96] installing automake-1.16.5-7.79 [ 43s] [82/96] installing libasm-0.189-6.6 [ 43s] [83/96] installing libncurses6-6.2-9.30 [ 44s] [84/96] installing build-20120927-3.3 [ 44s] [85/96] installing libncurses-6.2-9.30 [ 44s] [86/96] installing less-608-4.1 [ 44s] [87/96] installing libreadline-5.2-4.47 [ 44s] [88/96] installing procps-ng-3.3.17-4.4 [ 45s] [89/96] installing libtool-2.4.7-6.87 [ 45s] [90/96] installing elfutils-0.189-6.6 [ 45s] [91/96] installing util-linux-2.37.4-14.4 [ 45s] [92/96] installing util-linux-su-2.37.4-14.4 [ 45s] [93/96] installing nss-3.87-5.46 [ 45s] [94/96] installing libsoftokn3-3.87-5.46 [ 46s] [95/96] installing rpm-4.14.1.1-9.233 [ 46s] [96/96] installing rpm-build-4.14.1.1-9.233 [ 46s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 46s] now finalizing build dir... [ 47s] Running build time source services... [ 47s] build target is armv7l-tizen-linux [ 47s] ----------------------------------------------------------------- [ 47s] I have the following modifications for pcre.spec: [ 47s] 5c5 [ 47s] < Release: 0 [ 47s] --- [ 47s] > Release: 5.42 [ 47s] ----------------------------------------------------------------- [ 47s] ----- building pcre.spec (user abuild) [ 47s] ----------------------------------------------------------------- [ 47s] ----------------------------------------------------------------- [ 47s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base:Tool/standard/0dddebcbfe0e4b7c52c58e3d7f30bcc8-pcre' -ba /home/abuild/rpmbuild/SOURCES/pcre.spec [ 47s] Building target platforms: armv7l-tizen-linux [ 47s] Building for target armv7l-tizen-linux [ 47s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.R398Hq [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + rm -rf pcre-8.45 [ 47s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.45.tar.bz2 [ 47s] + /bin/tar -xof - [ 47s] + STATUS=0 [ 47s] + '[' 0 -ne 0 ']' [ 47s] + cd pcre-8.45 [ 47s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 47s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 47s] + /bin/patch -p1 [ 47s] patching file Makefile.am [ 47s] + exit 0 [ 47s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MPzuDn [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd pcre-8.45 [ 47s] ++ uname -m [ 48s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CFLAGS [ 48s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CXXFLAGS [ 48s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 48s] + export FFLAGS [ 48s] + LDFLAGS= [ 48s] + export LDFLAGS [ 48s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 48s] + autoreconf -fiv [ 48s] autoreconf: export WARNINGS= [ 48s] autoreconf: Entering directory '.' [ 48s] autoreconf: configure.ac: not using Gettext [ 49s] autoreconf: running: aclocal --force -I m4 [ 55s] autoreconf: configure.ac: tracing [ 57s] autoreconf: running: libtoolize --copy --force [ 57s] libtoolize: putting auxiliary files in '.'. [ 57s] libtoolize: copying file './ltmain.sh' [ 57s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 57s] libtoolize: copying file 'm4/libtool.m4' [ 57s] libtoolize: copying file 'm4/ltoptions.m4' [ 57s] libtoolize: copying file 'm4/ltsugar.m4' [ 57s] libtoolize: copying file 'm4/ltversion.m4' [ 57s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 57s] autoreconf: configure.ac: not using Intltool [ 57s] autoreconf: configure.ac: not using Gtkdoc [ 57s] autoreconf: running: aclocal --force -I m4 [ 64s] autoreconf: running: /usr/bin/autoconf --force [ 65s] configure.ac:88: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. [ 65s] configure.ac:88: You should run autoupdate. [ 65s] m4/ltoptions.m4:148: AC_LIBTOOL_WIN32_DLL is expanded from... [ 65s] configure.ac:88: the top level [ 65s] configure.ac:88: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you [ 65s] configure.ac:88: put the 'win32-dll' option into LT_INIT's first parameter. [ 65s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 65s] m4/ltoptions.m4:148: AC_LIBTOOL_WIN32_DLL is expanded from... [ 65s] configure.ac:88: the top level [ 65s] configure.ac:406: warning: back quotes and double quotes must not be escaped in: invalid argument \"$enable_newline\" to --enable-newline option [ 65s] configure.ac:445: warning: back quotes and double quotes must not be escaped in: invalid argument \"$with_link_size\" to --with-link-size option [ 65s] configure.ac:478: warning: The macro `AC_HEADER_STDC' is obsolete. [ 65s] configure.ac:478: You should run autoupdate. [ 65s] ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... [ 65s] configure.ac:478: the top level [ 67s] autoreconf: running: /usr/bin/autoheader --force [ 69s] autoreconf: running: automake --add-missing --copy --force-missing [ 72s] configure.ac:34: installing './compile' [ 72s] configure.ac:29: installing './missing' [ 72s] Makefile.am: installing './depcomp' [ 74s] autoreconf: Leaving directory '.' [ 74s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 74s] checking for a BSD-compatible install... /bin/install -c [ 74s] checking whether build environment is sane... yes [ 74s] checking for a race-free mkdir -p... /bin/mkdir -p [ 74s] checking for gawk... gawk [ 74s] checking whether make sets $(MAKE)... yes [ 74s] checking whether make supports nested variables... yes [ 74s] checking whether make supports nested variables... (cached) yes [ 74s] checking whether make supports the include directive... yes (GNU style) [ 74s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 74s] checking whether the C compiler works... yes [ 74s] checking for C compiler default output file name... a.out [ 74s] checking for suffix of executables... [ 74s] checking whether we are cross compiling... no [ 74s] checking for suffix of object files... o [ 74s] checking whether the compiler supports GNU C... yes [ 74s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 75s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 75s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 75s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 75s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 75s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 75s] checking for armv7l-tizen-linux-gnueabi-link... no [ 75s] checking for ar... ar [ 75s] checking the archiver (ar) interface... ar [ 75s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 75s] checking whether the compiler supports GNU C... (cached) yes [ 75s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 75s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... (cached) none needed [ 75s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 75s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 75s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 75s] checking whether the compiler supports GNU C++... yes [ 75s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 75s] checking for armv7l-tizen-linux-gnueabi-g++ option to enable C++11 features... none needed [ 75s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 75s] checking for stdio.h... yes [ 75s] checking for stdlib.h... yes [ 75s] checking for string.h... yes [ 75s] checking for inttypes.h... yes [ 75s] checking for stdint.h... yes [ 75s] checking for strings.h... yes [ 75s] checking for sys/stat.h... yes [ 75s] checking for sys/types.h... yes [ 75s] checking for unistd.h... yes [ 75s] checking for int64_t... yes [ 75s] checking build system type... armv7l-tizen-linux-gnueabi [ 75s] checking host system type... armv7l-tizen-linux-gnueabi [ 75s] checking how to print strings... printf [ 75s] checking for a sed that does not truncate output... /bin/sed [ 75s] checking for grep that handles long lines and -e... /bin/grep [ 75s] checking for egrep... /bin/grep -E [ 75s] checking for fgrep... /bin/grep -F [ 75s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 75s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 75s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 75s] checking the name lister (/bin/nm -B) interface... BSD nm [ 75s] checking whether ln -s works... yes [ 75s] checking the maximum length of command line arguments... 1572864 [ 75s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 75s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 75s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 75s] checking for armv7l-tizen-linux-gnueabi-file... no [ 75s] checking for file... file [ 75s] checking for armv7l-tizen-linux-gnueabi-objdump... objdump [ 75s] checking how to recognize dependent libraries... pass_all [ 75s] checking for armv7l-tizen-linux-gnueabi-dlltool... dlltool [ 75s] checking how to associate runtime and link libraries... printf %s\n [ 75s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 75s] checking for archiver @FILE support... @ [ 75s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 75s] checking for strip... strip [ 75s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 75s] checking for ranlib... ranlib [ 75s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 75s] checking for sysroot... no [ 76s] checking for a working dd... /bin/dd [ 76s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 76s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 76s] checking for mt... no [ 76s] checking if : is a manifest tool... no [ 76s] checking for dlfcn.h... yes [ 76s] checking for objdir... .libs [ 76s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 76s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 76s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 76s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 76s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 76s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 76s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 76s] checking whether -lc should be explicitly linked in... no [ 76s] checking dynamic linker characteristics... GNU/Linux ld.so [ 76s] checking how to hardcode library paths into programs... immediate [ 76s] checking whether stripping libraries is possible... yes [ 76s] checking if libtool supports shared libraries... yes [ 76s] checking whether to build shared libraries... yes [ 76s] checking whether to build static libraries... yes [ 76s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 76s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 76s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 76s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 76s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 76s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 76s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 76s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 76s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 76s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 76s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 76s] checking how to hardcode library paths into programs... immediate [ 76s] checking whether ln -s works... yes [ 76s] checking whether the -Werror option is usable... yes [ 76s] checking for simple visibility declarations... yes [ 76s] checking for egrep... (cached) /bin/grep -E [ 76s] checking for limits.h... yes [ 76s] checking for sys/types.h... (cached) yes [ 76s] checking for sys/stat.h... (cached) yes [ 76s] checking for dirent.h... yes [ 76s] checking for windows.h... no [ 76s] checking for alias support in the linker... no [ 77s] checking for alias support in the linker... no [ 77s] checking for string... yes [ 77s] checking for bits/type_traits.h... no [ 77s] checking for type_traits.h... no [ 77s] checking for strtoq... yes [ 77s] checking for long long... yes [ 77s] checking for unsigned long long... yes [ 77s] checking for an ANSI C-conforming const... yes [ 77s] checking for size_t... yes [ 77s] checking for bcopy... yes [ 77s] checking for memmove... yes [ 77s] checking for strerror... yes [ 77s] checking for zlib.h... no [ 77s] checking for gzopen in -lz... no [ 78s] checking for bzlib.h... no [ 78s] checking for libbz2... no [ 78s] checking for the pthreads library -lpthreads... no [ 78s] checking whether pthreads work without any flags... no [ 78s] checking whether pthreads work with -Kthread... no [ 78s] checking whether pthreads work with -kthread... no [ 78s] checking for the pthreads library -llthread... no [ 78s] checking whether pthreads work with -pthread... yes [ 78s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 78s] checking if more special flags are required for pthreads... no [ 78s] checking for PTHREAD_PRIO_INHERIT... yes [ 78s] checking that generated files are newer than configure... done [ 78s] configure: creating ./config.status [ 79s] config.status: creating Makefile [ 79s] config.status: creating libpcre.pc [ 79s] config.status: creating libpcre16.pc [ 79s] config.status: creating libpcre32.pc [ 79s] config.status: creating libpcreposix.pc [ 79s] config.status: creating libpcrecpp.pc [ 79s] config.status: creating pcre-config [ 79s] config.status: creating pcre.h [ 79s] config.status: creating pcre_stringpiece.h [ 79s] config.status: creating pcrecpparg.h [ 79s] config.status: creating config.h [ 79s] config.status: executing depfiles commands [ 79s] config.status: executing libtool commands [ 79s] config.status: executing script-chmod commands [ 79s] config.status: executing delete-old-chartables commands [ 79s] [ 79s] pcre-8.45 configuration summary: [ 79s] [ 79s] Install prefix .................. : /usr [ 79s] C preprocessor .................. : [ 79s] C compiler ...................... : armv7l-tizen-linux-gnueabi-gcc [ 79s] C++ preprocessor ................ : armv7l-tizen-linux-gnueabi-g++ -E [ 79s] C++ compiler .................... : armv7l-tizen-linux-gnueabi-g++ [ 79s] Linker .......................... : /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 79s] C preprocessor flags ............ : [ 79s] C compiler flags ................ : -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -fvisibility=hidden [ 79s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -fvisibility-inlines-hidden [ 79s] Linker flags .................... : [ 79s] Extra libraries ................. : [ 79s] [ 79s] Build 8 bit pcre library ........ : yes [ 79s] Build 16 bit pcre library ....... : no [ 79s] Build 32 bit pcre library ....... : no [ 79s] Build C++ library ............... : yes [ 79s] Enable JIT compiling support .... : yes [ 79s] Enable UTF-8/16/32 support ...... : yes [ 79s] Unicode properties .............. : yes [ 79s] Newline char/sequence ........... : lf [ 79s] \R matches only ANYCRLF ......... : no [ 79s] EBCDIC coding ................... : no [ 79s] EBCDIC code for NL .............. : n/a [ 79s] Rebuild char tables ............. : no [ 79s] Use stack recursion ............. : yes [ 79s] POSIX mem threshold ............. : 10 [ 79s] Internal link size .............. : 2 [ 79s] Nested parentheses limit ........ : 250 [ 79s] Match limit ..................... : 10000000 [ 79s] Match limit recursion ........... : MATCH_LIMIT [ 79s] Build shared libs ............... : yes [ 79s] Build static libs ............... : yes [ 79s] Use JIT in pcregrep ............. : yes [ 79s] Buffer size for pcregrep ........ : 20480 [ 79s] Link pcregrep with libz ......... : no [ 79s] Link pcregrep with libbz2 ....... : no [ 79s] Link pcretest with libedit ...... : no [ 79s] Link pcretest with libreadline .. : no [ 79s] Valgrind support ................ : no [ 79s] Code coverage ................... : no [ 79s] [ 79s] + make -j4 [ 79s] rm -f pcre_chartables.c [ 79s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 79s] make all-am [ 79s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 79s] CC pcretest-pcretest.o [ 79s] CC pcretest-pcre_printint.o [ 79s] CC libpcre_la-pcre_byte_order.lo [ 79s] CC libpcre_la-pcre_compile.lo [ 80s] CC libpcre_la-pcre_config.lo [ 80s] CC libpcre_la-pcre_dfa_exec.lo [ 80s] CC libpcre_la-pcre_exec.lo [ 81s] CC libpcre_la-pcre_fullinfo.lo [ 82s] CC libpcre_la-pcre_get.lo [ 82s] CC libpcre_la-pcre_globals.lo [ 82s] CC libpcre_la-pcre_jit_compile.lo [ 84s] CC libpcre_la-pcre_maketables.lo [ 84s] CC libpcre_la-pcre_newline.lo [ 84s] CC libpcre_la-pcre_ord2utf8.lo [ 85s] CC libpcre_la-pcre_refcount.lo [ 85s] CC libpcre_la-pcre_string_utils.lo [ 85s] CC libpcre_la-pcre_study.lo [ 85s] CC libpcre_la-pcre_tables.lo [ 85s] CC libpcre_la-pcre_ucd.lo [ 85s] CC libpcre_la-pcre_valid_utf8.lo [ 85s] CC libpcre_la-pcre_version.lo [ 86s] CC libpcre_la-pcre_xclass.lo [ 86s] CC libpcre_la-pcre_chartables.lo [ 86s] CC libpcreposix_la-pcreposix.lo [ 86s] CC pcregrep-pcregrep.o [ 86s] CC pcre_jit_test-pcre_jit_test.o [ 86s] CXX pcrecpp_unittest-pcrecpp_unittest.o [ 87s] CXX libpcrecpp_la-pcrecpp.lo [ 88s] CXX libpcrecpp_la-pcre_scanner.lo [ 89s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 90s] CXX pcre_scanner_unittest-pcre_scanner_unittest.o [ 90s] CXX pcre_stringpiece_unittest-pcre_stringpiece_unittest.o [ 93s] CCLD libpcre.la [ 93s] CCLD libpcreposix.la [ 93s] CXXLD libpcrecpp.la [ 93s] CCLD pcre_jit_test [ 93s] CCLD pcretest [ 93s] CCLD pcregrep [ 93s] CXXLD pcrecpp_unittest [ 93s] CXXLD pcre_scanner_unittest [ 94s] CXXLD pcre_stringpiece_unittest [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 94s] + exit 0 [ 94s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JSzm0n [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd pcre-8.45 [ 94s] + LANG=C [ 94s] + export LANG [ 94s] + unset DISPLAY [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm [ 94s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm [ 94s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm install [ 94s] /bin/make install-am [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 94s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib' [ 94s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib' [ 94s] libtool: install: /bin/install -c .libs/libpcre.so.1.2.13 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcre.so.1.2.13 [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib && { ln -s -f libpcre.so.1.2.13 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.2.13 libpcre.so.1; }; }) [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib && { ln -s -f libpcre.so.1.2.13 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.2.13 libpcre.so; }; }) [ 94s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcre.la [ 94s] libtool: warning: relinking 'libpcreposix.la' [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.45; /bin/sh "/home/abuild/rpmbuild/BUILD/pcre-8.45/libtool" --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fvisibility=hidden -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -version-info 0:7:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm) [ 94s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.7T /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcreposix.so.0.0.7 [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.7 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.7 libpcreposix.so.0; }; }) [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.7 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.7 libpcreposix.so; }; }) [ 94s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcreposix.la [ 94s] libtool: warning: relinking 'libpcrecpp.la' [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.45; /bin/sh "/home/abuild/rpmbuild/BUILD/pcre-8.45/libtool" --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:2:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm) [ 94s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.2T /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcrecpp.so.0.0.2 [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.2 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.2 libpcrecpp.so.0; }; }) [ 94s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.2 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.2 libpcrecpp.so; }; }) [ 95s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcrecpp.la [ 95s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcre.a [ 95s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcre.a [ 95s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcre.a [ 95s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcreposix.a [ 95s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcreposix.a [ 95s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcreposix.a [ 95s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcrecpp.a [ 95s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcrecpp.a [ 95s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcrecpp.a [ 95s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin' [ 95s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin' [ 95s] libtool: warning: 'libpcre.la' has not been installed in '/usr/lib' [ 95s] libtool: warning: 'libpcreposix.la' has not been installed in '/usr/lib' [ 95s] libtool: warning: '/home/abuild/rpmbuild/BUILD/pcre-8.45/libpcre.la' has not been installed in '/usr/lib' [ 95s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin/pcretest [ 95s] libtool: warning: 'libpcre.la' has not been installed in '/usr/lib' [ 95s] libtool: warning: 'libpcreposix.la' has not been installed in '/usr/lib' [ 95s] libtool: warning: '/home/abuild/rpmbuild/BUILD/pcre-8.45/libpcre.la' has not been installed in '/usr/lib' [ 95s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin/pcregrep [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin' [ 95s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre' [ 95s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre/html' [ 95s] /bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre-config.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre32.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_exec.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_utf32_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre/html' [ 95s] /bin/install -c -m 644 doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre/html' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre/html' [ 95s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre/html' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/include' [ 95s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/include' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man1' [ 95s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man1' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3' [ 95s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre32.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_exec.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_utf32_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcredemo.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3' [ 95s] /bin/install -c -m 644 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/include' [ 95s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/include' [ 95s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/pkgconfig' [ 95s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/pkgconfig' [ 95s] /bin/make install-data-hook [ 95s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 95s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 95s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_compile.3 [ 95s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_compile2.3 [ 95s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_config.3 [ 95s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 95s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 95s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 95s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_exec.3 [ 95s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_free_study.3 [ 96s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_free_substring.3 [ 96s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 96s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 96s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 96s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 96s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 96s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_get_substring.3 [ 96s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 96s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_jit_exec.3 [ 96s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 96s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 96s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_maketables.3 [ 96s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 96s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_refcount.3 [ 96s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_study.3 [ 96s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 96s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre16_version.3 [ 96s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_assign_jit_stack.3 [ 96s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_compile.3 [ 96s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_compile2.3 [ 96s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_config.3 [ 96s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_copy_named_substring.3 [ 96s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_copy_substring.3 [ 96s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_dfa_exec.3 [ 96s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_exec.3 [ 96s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_free_study.3 [ 96s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_free_substring.3 [ 96s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_free_substring_list.3 [ 96s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_fullinfo.3 [ 96s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_get_named_substring.3 [ 96s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_get_stringnumber.3 [ 96s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_get_stringtable_entries.3 [ 96s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_get_substring.3 [ 96s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_get_substring_list.3 [ 96s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_jit_exec.3 [ 96s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_jit_stack_alloc.3 [ 96s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_jit_stack_free.3 [ 96s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_maketables.3 [ 96s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_pattern_to_host_byte_order.3 [ 96s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_refcount.3 [ 96s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_study.3 [ 96s] ln -sf pcre_utf32_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_utf32_to_host_byte_order.3 [ 96s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/man/man3/pcre32_version.3 [ 96s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 96s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 96s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.45' [ 96s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/info/dir [ 96s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm -regex '.*\.la$' [ 96s] + xargs rm -f -- [ 96s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm//usr/share/doc/packages [ 96s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm//usr/share/doc/packages/pcre-doc [ 96s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/*.la' [ 96s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 8.45-5.42 --unique-debug-src-base pcre-8.45-5.42.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pcre-8.45 [ 97s] 1+0 records in [ 97s] 1+0 records out [ 97s] 1+0 records in [ 97s] 1+0 records out [ 97s] 1+0 records in [ 97s] 1+0 records out [ 97s] 1+0 records in [ 97s] 1+0 records out [ 97s] 7 bytes (7 B) copied7 bytes (7 B) copied7 bytes (7 B) copied7 bytes (7 B) copied, 0.000575846 s, 12.2 kB/s [ 97s] , 0.00058979 s, 11.9 kB/s [ 97s] , 0.000580792 s, 12.1 kB/s [ 97s] , 0.000579955 s, 12.1 kB/s [ 97s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcrecpp.so.0.0.2 [ 97s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin/pcretest [ 97s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcre.so.1.2.13 [ 97s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/bin/pcregrep [ 97s] 1+0 records in [ 97s] 1+0 records out [ 97s] 7 bytes (7 B) copied, 0.000583646 s, 12.0 kB/s [ 97s] 0+0 records in [ 97s] 0+0 records out [ 97s] 0 bytes (0 B) copied, 0.000423588 s, 0.0 kB/s [ 97s] 0+0 records in [ 97s] 0+0 records out [ 97s] 0 bytes (0 B) copied, 0.000425099 s, 0.0 kB/s [ 97s] 0+0 records in [ 97s] 0+0 records out [ 97s] 0 bytes (0 B) copied, 0.000443153 s, 0.0 kB/s [ 97s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/lib/libpcreposix.so.0.0.7 [ 97s] 0+0 records in [ 97s] 0+0 records out [ 97s] 0 bytes (0 B) copied, 0.000427214 s, 0.0 kB/s [ 97s] 4383 blocks [ 97s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.45/pcre-debuginfo.manifest [ 97s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.45/pcre-debugsource.manifest [ 97s] + /usr/lib/rpm/check-buildroot [ 97s] + /usr/lib/rpm//brp-compress [ 99s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 99s] + /usr/lib/rpm/brp-python-hardlink [ 99s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm [ 99s] Processing files: pcre-debugsource-8.45-5.42.armv7l [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: pcre-debugsource = 8.45-5.42 pcre-debugsource(armv7l-32) = 8.45-5.42 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Processing files: pcre-devel-8.45-5.42.armv7l [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 100s] Provides: pcre-devel = 8.45-5.42 pcre-devel(armv7l-32) = 8.45-5.42 pkgconfig(libpcre) = 8.45 pkgconfig(libpcrecpp) = 8.45 pkgconfig(libpcreposix) = 8.45 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1 libpcrecpp.so.0 libpcreposix.so.0 pkgconfig(libpcre) [ 100s] Processing files: pcre-devel-static-8.45-5.42.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Provides: pcre-devel-static = 8.45-5.42 pcre-devel-static(armv7l-32) = 8.45-5.42 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Processing files: libpcre-8.45-5.42.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.zdbBcn [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd pcre-8.45 [ 100s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcre [ 100s] + export LC_ALL=C [ 100s] + LC_ALL=C [ 100s] + export LICENSEDIR [ 100s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcre [ 100s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcre [ 100s] + exit 0 [ 100s] Provides: libpcre = 8.45-5.42 libpcre(armv7l-32) = 8.45-5.42 libpcre.so.1 pcre = 8.45 [ 100s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires(post): /sbin/ldconfig [ 100s] Requires(postun): /sbin/ldconfig [ 100s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 100s] Obsoletes: pcre < 8.45 [ 100s] Processing files: libpcreposix-8.45-5.42.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Ky14lq [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd pcre-8.45 [ 100s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcreposix [ 100s] + export LC_ALL=C [ 100s] + LC_ALL=C [ 100s] + export LICENSEDIR [ 100s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcreposix [ 100s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcreposix [ 100s] + exit 0 [ 100s] Provides: libpcreposix = 8.45-5.42 libpcreposix(armv7l-32) = 8.45-5.42 libpcreposix.so.0 [ 100s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires(post): /sbin/ldconfig [ 100s] Requires(postun): /sbin/ldconfig [ 100s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 rtld(GNU_HASH) [ 100s] Processing files: libpcrecpp-8.45-5.42.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.WFar9q [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd pcre-8.45 [ 100s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcrecpp [ 100s] + export LC_ALL=C [ 100s] + LC_ALL=C [ 100s] + export LICENSEDIR [ 100s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcrecpp [ 100s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/libpcrecpp [ 100s] + exit 0 [ 100s] Provides: libpcrecpp = 8.45-5.42 libpcrecpp(armv7l-32) = 8.45-5.42 libpcrecpp.so.0 [ 100s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Requires(post): /sbin/ldconfig [ 100s] Requires(postun): /sbin/ldconfig [ 100s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.8) libstdc++.so.6(CXXABI_1.3.9) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 100s] Processing files: pcre-doc-8.45-5.42.noarch [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.PKnEJp [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd pcre-8.45 [ 100s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + export LC_ALL=C [ 100s] + LC_ALL=C [ 100s] + export DOCDIR [ 100s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/doc/packages/pcre-doc [ 100s] + exit 0 [ 100s] Provides: pcre-doc = 8.45-5.42 [ 100s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 100s] Processing files: pcre-tools-8.45-5.42.armv7l [ 100s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 100s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 100s] [ 100s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.M0BEjq [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd pcre-8.45 [ 100s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/pcre-tools [ 100s] + export LC_ALL=C [ 100s] + LC_ALL=C [ 100s] + export LICENSEDIR [ 100s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/pcre-tools [ 101s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm/usr/share/licenses/pcre-tools [ 101s] + exit 0 [ 101s] Provides: pcre-tools = 8.45-5.42 pcre-tools(armv7l-32) = 8.45-5.42 [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 101s] Processing files: libpcre-debuginfo-8.45-5.42.armv7l [ 101s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 101s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 101s] [ 101s] Provides: libpcre-debuginfo = 8.45-5.42 libpcre-debuginfo(armv7l-32) = 8.45-5.42 [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Recommends: pcre-debugsource(armv7l-32) = 8.45-5.42 [ 101s] Processing files: libpcreposix-debuginfo-8.45-5.42.armv7l [ 101s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 101s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 101s] [ 101s] Provides: libpcreposix-debuginfo = 8.45-5.42 libpcreposix-debuginfo(armv7l-32) = 8.45-5.42 [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Recommends: pcre-debugsource(armv7l-32) = 8.45-5.42 [ 101s] Processing files: libpcrecpp-debuginfo-8.45-5.42.armv7l [ 101s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 101s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 101s] [ 101s] Provides: libpcrecpp-debuginfo = 8.45-5.42 libpcrecpp-debuginfo(armv7l-32) = 8.45-5.42 [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Recommends: pcre-debugsource(armv7l-32) = 8.45-5.42 [ 101s] Processing files: pcre-tools-debuginfo-8.45-5.42.armv7l [ 101s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 101s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 101s] [ 101s] Provides: pcre-tools-debuginfo = 8.45-5.42 pcre-tools-debuginfo(armv7l-32) = 8.45-5.42 [ 101s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 101s] Recommends: pcre-debugsource(armv7l-32) = 8.45-5.42 [ 101s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm [ 101s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.45-5.42.src.rpm [ 101s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.45-5.42.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.45-5.42.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.45-5.42.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.45-5.42.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.45-5.42.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.45-5.42.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.45-5.42.noarch.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.45-5.42.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.45-5.42.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.45-5.42.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.45-5.42.armv7l.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.45-5.42.armv7l.rpm [ 103s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.LKwQAp [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd pcre-8.45 [ 103s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.45-5.42.arm [ 103s] + exit 0 [ 103s] ... checking for files with abuild user/group [ 103s] ... creating baselibs [ 104s] no targets for arch armv7l, nothing to do [ 104s] ... comparing built packages with the former built [ 104s] /usr/lib/build/pkg-diff.sh [ 104s] compare /.build.oldpackages/pcre-8.45-5.41.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.45-5.42.src.rpm [ 104s] This is not a prerelease project. Compare the project name. [ 104s] comparing rpmtags [ 104s] comparing RELEASE [ 104s] comparing PROVIDES [ 104s] comparing scripts [ 104s] comparing filelist [ 104s] comparing file checksum [ 104s] RPM meta information is identical [ 104s] compare /.build.oldpackages/libpcre-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.45-5.42.armv7l.rpm [ 105s] Comparing libpcre-8.45-5.41.armv7l.rpm to libpcre-8.45-5.42.armv7l.rpm [ 105s] This is not a prerelease project. Compare the project name. [ 105s] comparing rpmtags [ 105s] comparing RELEASE [ 105s] comparing PROVIDES [ 105s] comparing scripts [ 105s] comparing filelist [ 105s] comparing file checksum [ 105s] creating rename script [ 105s] RPM file checksum differs. [ 105s] Extracting packages [ 107s] /usr/lib/libpcre.so.1.2.13: only difference was in build-id or gnu_debuglink, GOOD. [ 107s] Package content is identical [ 107s] compare /.build.oldpackages/libpcre-debuginfo-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.45-5.42.armv7l.rpm [ 107s] skipping -debuginfo package [ 107s] compare /.build.oldpackages/libpcrecpp-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.45-5.42.armv7l.rpm [ 107s] Comparing libpcrecpp-8.45-5.41.armv7l.rpm to libpcrecpp-8.45-5.42.armv7l.rpm [ 107s] This is not a prerelease project. Compare the project name. [ 107s] comparing rpmtags [ 107s] comparing RELEASE [ 107s] comparing PROVIDES [ 107s] comparing scripts [ 107s] comparing filelist [ 107s] comparing file checksum [ 108s] creating rename script [ 108s] RPM file checksum differs. [ 108s] Extracting packages [ 109s] /usr/lib/libpcrecpp.so.0.0.2: only difference was in build-id or gnu_debuglink, GOOD. [ 109s] Package content is identical [ 109s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.45-5.42.armv7l.rpm [ 109s] skipping -debuginfo package [ 109s] compare /.build.oldpackages/libpcreposix-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.45-5.42.armv7l.rpm [ 109s] Comparing libpcreposix-8.45-5.41.armv7l.rpm to libpcreposix-8.45-5.42.armv7l.rpm [ 109s] This is not a prerelease project. Compare the project name. [ 109s] comparing rpmtags [ 109s] comparing RELEASE [ 109s] comparing PROVIDES [ 109s] comparing scripts [ 109s] comparing filelist [ 109s] comparing file checksum [ 109s] creating rename script [ 109s] RPM file checksum differs. [ 109s] Extracting packages [ 109s] /usr/lib/libpcreposix.so.0.0.7: only difference was in build-id or gnu_debuglink, GOOD. [ 109s] Package content is identical [ 109s] compare /.build.oldpackages/libpcreposix-debuginfo-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.45-5.42.armv7l.rpm [ 110s] skipping -debuginfo package [ 110s] compare /.build.oldpackages/pcre-debugsource-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.45-5.42.armv7l.rpm [ 110s] Comparing pcre-debugsource-8.45-5.41.armv7l.rpm to pcre-debugsource-8.45-5.42.armv7l.rpm [ 110s] This is not a prerelease project. Compare the project name. [ 110s] comparing rpmtags [ 110s] comparing RELEASE [ 110s] comparing PROVIDES [ 110s] comparing scripts [ 110s] comparing filelist [ 110s] comparing file checksum [ 110s] creating rename script [ 110s] RPM meta information is identical [ 110s] compare /.build.oldpackages/pcre-devel-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.45-5.42.armv7l.rpm [ 110s] Comparing pcre-devel-8.45-5.41.armv7l.rpm to pcre-devel-8.45-5.42.armv7l.rpm [ 110s] This is not a prerelease project. Compare the project name. [ 110s] comparing rpmtags [ 110s] comparing RELEASE [ 110s] comparing PROVIDES [ 110s] comparing scripts [ 110s] comparing filelist [ 110s] comparing file checksum [ 110s] creating rename script [ 110s] RPM meta information is identical [ 110s] compare /.build.oldpackages/pcre-devel-static-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.45-5.42.armv7l.rpm [ 110s] Comparing pcre-devel-static-8.45-5.41.armv7l.rpm to pcre-devel-static-8.45-5.42.armv7l.rpm [ 111s] This is not a prerelease project. Compare the project name. [ 111s] comparing rpmtags [ 111s] comparing RELEASE [ 111s] comparing PROVIDES [ 111s] comparing scripts [ 111s] comparing filelist [ 111s] comparing file checksum [ 111s] creating rename script [ 111s] RPM file checksum differs. [ 111s] Extracting packages [ 111s] /usr/lib/libpcre_la-pcre_byte_order.o differs in ELF section .comment [ 111s] --- /tmp/tmp.zyTup64005/tmp.EQzmU64319 2023-04-05 09:24:29.472000000 +0000 [ 111s] +++ /tmp/tmp.zyTup64005/tmp.dIdcJ64338 2023-04-05 09:24:29.472000000 +0000 [ 111s] @@ -4,4 +4,4 @@ [ 111s] Contents of section .comment: [ 111s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 111s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 111s] - 0020 31382e32 31292039 2e322e30 00 18.21) 9.2.0. [ 111s] + 0020 31382e32 33292039 2e322e30 00 18.23) 9.2.0. [ 111s] compare /.build.oldpackages/pcre-doc-8.45-5.41.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.45-5.42.noarch.rpm [ 111s] Comparing pcre-doc-8.45-5.41.noarch.rpm to pcre-doc-8.45-5.42.noarch.rpm [ 111s] This is not a prerelease project. Compare the project name. [ 111s] comparing rpmtags [ 111s] comparing RELEASE [ 111s] comparing PROVIDES [ 111s] comparing scripts [ 111s] comparing filelist [ 111s] comparing file checksum [ 111s] creating rename script [ 111s] RPM meta information is identical [ 111s] compare /.build.oldpackages/pcre-tools-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.45-5.42.armv7l.rpm [ 112s] Comparing pcre-tools-8.45-5.41.armv7l.rpm to pcre-tools-8.45-5.42.armv7l.rpm [ 112s] This is not a prerelease project. Compare the project name. [ 112s] comparing rpmtags [ 112s] comparing RELEASE [ 112s] comparing PROVIDES [ 112s] comparing scripts [ 112s] comparing filelist [ 112s] comparing file checksum [ 112s] creating rename script [ 112s] RPM file checksum differs. [ 112s] Extracting packages [ 112s] /usr/bin/pcregrep: only difference was in build-id or gnu_debuglink, GOOD. [ 112s] /usr/bin/pcretest: only difference was in build-id or gnu_debuglink, GOOD. [ 112s] Package content is identical [ 112s] compare /.build.oldpackages/pcre-tools-debuginfo-8.45-5.41.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.45-5.42.armv7l.rpm [ 112s] skipping -debuginfo package [ 112s] [ 112s] obsnw02 finished "build pcre.spec" at Wed Apr 5 09:24:30 UTC 2023. [ 112s] Retried build at Wed Apr 5 11:23:04 2023 returned same result, skipped