[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw06 started "build _service:gbs:perl-PerlIO-gzip.spec" at Wed Mar 3 11:33:50 UTC 2021. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 '2889c29a26b7b72cfc8d93a5a7a4a22c' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libzstd1... [ 1s] [8/41] preinstalling bash... [ 2s] [9/41] preinstalling diffutils... [ 2s] [10/41] preinstalling grep... [ 2s] [11/41] preinstalling libattr... [ 2s] [12/41] preinstalling libblkid... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 2s] [16/41] preinstalling liblua... [ 2s] [17/41] preinstalling liblzma... [ 2s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libsqlite... [ 2s] [22/41] preinstalling libuuid... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/97] installing libmagic-data-5.39-4.96 [ 9s] [2/97] installing setup-0.9-4.26 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/97] installing filesystem-3.1-3.3 [ 9s] [4/97] installing glibc-2.30-6.14 [ 9s] [5/97] installing libatomic-9.2.0-8.13 [ 10s] [6/97] installing libgcc-9.2.0-8.13 [ 10s] [7/97] installing libzstd1-1.4.5-1.69 [ 10s] [8/97] installing bash-3.2.57-4.4 [ 10s] [9/97] installing cpio-2.8-5.2 [ 10s] [10/97] installing diffutils-3.3-4.2 [ 10s] [11/97] installing findutils-4.3.8-3.167 [ 10s] [12/97] installing gdbm-1.8.3-3.190 [ 11s] [13/97] installing hostname-3.23-3.2 [ 11s] [14/97] installing libattr-2.4.48-4.113 [ 11s] [15/97] installing libblkid-2.36-7.18 [ 11s] [16/97] installing libbz2-1.0.8-4.129 [ 12s] [17/97] installing libcap-2.24-3.175 [ 12s] [18/97] installing libext2fs-1.46.0-4.4 [ 12s] [19/97] installing libfreebl3-3.34.1-3.136 [ 13s] [20/97] installing libgfortran-9.2.0-8.13 [ 13s] [21/97] installing libgomp-9.2.0-8.13 [ 13s] [22/97] installing libitm-9.2.0-8.13 [ 14s] [23/97] installing libltdl-2.4.2-3.138 [ 14s] [24/97] installing liblua-5.1.5-3.128 [ 14s] [25/97] installing liblzma-5.2.5-4.54 [ 14s] [26/97] installing libopenssl11-1.1.1i-4.18 [ 15s] [27/97] installing libpcre-8.44-4.17 [ 15s] [28/97] installing libpopt-1.16-3.174 [ 15s] [29/97] installing libsmack-1.3.1-3.170 [ 16s] [30/97] installing libsmartcols-2.36-7.18 [ 16s] [31/97] installing libsqlite-3.33.0-4.98 [ 18s] [32/97] installing libstdc++-9.2.0-8.13 [ 19s] [33/97] installing libuuid-2.36-7.18 [ 19s] [34/97] installing m4-1.4.17-3.2 [ 19s] [35/97] installing net-tools-2.0_20121208git-4.3 [ 19s] [36/97] installing nspr-4.12-3.174 [ 20s] [37/97] installing patch-2.7-3.166 [ 20s] [38/97] installing pkg-config-0.28-3.166 [ 20s] [39/97] installing sed-4.1c-3.3 [ 20s] [40/97] installing update-alternatives-1.20.5-3.3 [ 20s] [41/97] installing which-2.17-4.3 [ 21s] [42/97] installing zlib-1.2.11-3.178 [ 21s] [43/97] installing build-compare-2015.04.28-3.65 [ 21s] [44/97] installing libstdc++-devel-9.2.0-8.13 [ 22s] [45/97] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 26s] [46/97] installing terminfo-base-full-6.2-5.88 [ 26s] [47/97] installing cpp-9.2.0-8.13 [ 27s] [48/97] installing gcc-c++-9.2.0-8.13 [ 28s] [49/97] installing binutils-2.33.1-7.74 [ 28s] [50/97] installing coreutils-6.9-4.47 [ 29s] [51/97] installing gawk-3.1.5-4.3 [ 29s] [52/97] installing grep-2.5.2-3.3 [ 29s] [53/97] installing libacl-2.2.53-4.113 [ 29s] [54/97] installing libcc1-9.2.0-8.13 [ 29s] [55/97] installing libelf-0.178-3.90 [ 30s] [56/97] installing libmount-2.36-7.18 [ 30s] [57/97] installing libubsan-9.2.0-8.13 [ 30s] [58/97] installing make-4.0-2.45 [ 31s] [59/97] installing nss-certs-3.34.1-3.136 [ 31s] [60/97] installing smack-1.3.1-3.170 [ 31s] [61/97] installing bzip2-1.0.8-4.129 [ 31s] [62/97] installing libfdisk-2.36-7.18 [ 31s] [63/97] installing libmagic-5.39-4.96 [ 32s] [64/97] installing libxml2-2.9.10-4.12 [ 32s] [65/97] installing perl-5.32.0-4.46 [ 34s] [66/97] installing xz-5.2.5-4.54 [ 34s] [67/97] installing build-mkbaselibs-20120927-3.3 [ 35s] [68/97] installing linux-glibc-devel-3.10-4.17 [ 35s] [69/97] installing autoconf-2.69-3.105 [ 36s] [70/97] installing file-5.39-4.96 [ 36s] [71/97] installing glibc-locale-2.30-6.14 [ 39s] [72/97] installing tar-1.17-2.5 [ 41s] [73/97] installing gzip-1.3.12-3.175 [ 41s] [74/97] installing libncurses6-6.2-5.88 [ 42s] [75/97] installing pam-1.1.6-3.3 [ 42s] [76/97] installing tzdata-2020a-3.3 [ 42s] [77/97] installing libdw-0.178-3.90 [ 43s] [78/97] installing libarchive-3.5.1-2.15 [ 43s] [79/97] installing gcc-9.2.0-8.13 [ 44s] [80/97] installing libncurses-6.2-5.88 [ 44s] [81/97] installing glibc-devel-2.30-6.14 [ 44s] [82/97] installing qemu-accel-x86_64-armv7l-0.4-5.8 [ 54s] [83/97] installing automake-1.15.1-3.123 [ 54s] [84/97] installing less-466-3.3 [ 54s] [85/97] installing libreadline-5.2-3.46 [ 55s] [86/97] installing procps-ng-3.3.16-3.3 [ 55s] [87/97] installing libasm-0.178-3.90 [ 55s] [88/97] installing build-20120927-3.3 [ 55s] [89/97] installing zlib-devel-1.2.11-3.178 [ 55s] [90/97] installing libtool-2.4.2-3.138 [ 55s] [91/97] installing elfutils-0.178-3.90 [ 55s] [92/97] installing util-linux-2.36-7.18 [ 56s] [93/97] installing util-linux-su-2.36-7.18 [ 56s] [94/97] installing nss-3.34.1-3.136 [ 56s] [95/97] installing libsoftokn3-3.34.1-3.136 [ 56s] [96/97] installing rpm-4.14.1.1-7.4 [ 61s] [97/97] installing rpm-build-4.14.1.1-7.4 [ 63s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 63s] now finalizing build dir... [ 64s] Running build time source services... [ 64s] build target is armv7l-tizen-linux [ 64s] ----------------------------------------------------------------- [ 64s] I have the following modifications for perl-PerlIO-gzip.spec: [ 64s] 4c4 [ 64s] < Release: 1 [ 64s] --- [ 64s] > Release: 1.6 [ 64s] ----------------------------------------------------------------- [ 64s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 64s] ----------------------------------------------------------------- [ 64s] ----------------------------------------------------------------- [ 64s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/2889c29a26b7b72cfc8d93a5a7a4a22c-perl-PerlIO-gzip' -ba /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 66s] Building target platforms: armv7l-tizen-linux [ 66s] Building for target armv7l-tizen-linux [ 66s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qTULW9 [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + rm -rf perl-PerlIO-gzip-0.18 [ 66s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.18.tar.gz [ 66s] + /bin/tar -xof - [ 66s] + STATUS=0 [ 66s] + '[' 0 -ne 0 ']' [ 66s] + cd perl-PerlIO-gzip-0.18 [ 66s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 66s] + echo 'Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):' [ 66s] Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch): [ 66s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 66s] patching file Makefile.PL [ 66s] + exit 0 [ 66s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.2zrjsb [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd perl-PerlIO-gzip-0.18 [ 66s] ++ uname -m [ 66s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + LDFLAGS= [ 66s] + export LDFLAGS [ 66s] + perl Makefile.PL [ 67s] Checking if your kit is complete... [ 67s] Looks good [ 68s] Generating a Unix-style Makefile [ 68s] Writing Makefile for PerlIO::gzip [ 68s] Writing MYMETA.yml and MYMETA.json [ 68s] + make [ 71s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 71s] Running Mkbootstrap for gzip () [ 71s] chmod 644 "gzip.bs" [ 71s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 71s] "/usr/bin/perl" "/usr/lib/perl5/5.32.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.32.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 72s] mv gzip.xsc gzip.c [ 72s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -fPIC "-I/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/CORE" gzip.c [ 72s] gzip.xs: In function 'PerlIOGzip_popped': [ 72s] gzip.xs:870:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'IV' {aka 'long int'} [-Wformat=] [ 72s] 870 | PerlIO_debug("PerlIOGzip_popped code=%d\n", code); [ 72s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ [ 72s] | | [ 72s] | IV {aka long int} [ 72s] In file included from /usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/CORE/perl.h:5603, [ 72s] from gzip.xs:13: [ 72s] gzip.xs: In function 'PerlIOGzip_getarg': [ 72s] /usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/CORE/embed.h:378:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 72s] 378 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 72s] | ^~~~~~~~~~~~ [ 72s] gzip.xs:675:24: note: 'mode' was declared here [ 72s] 675 | register const char *mode; [ 72s] | ^~~~ [ 72s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 72s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 72s] -lz \ [ 72s] [ 72s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 73s] Manifying 1 pod document [ 73s] + exit 0 [ 73s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.uBnYL8 [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd perl-PerlIO-gzip-0.18 [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 73s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 73s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm install_vendor [ 73s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 74s] Manifying 1 pod document [ 75s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 75s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 75s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 75s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/man/man3/PerlIO::gzip.3 [ 75s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/perllocal.pod [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/info [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/doc/packages [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/doc/perl-PerlIO-gzip [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/doc/perl-PerlIO-gzip-0.18 [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/gtk-doc [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/doc [ 75s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/man [ 75s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm -regex '.*/man/man./.*.[0-9]' [ 75s] + xargs rm -f -- [ 75s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm -regex '.*/man/../man./.*.[0-9]' [ 75s] + xargs rm -f -- [ 75s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm -regex '.*/man/man./.*.[0-9]pm' [ 75s] + xargs rm -f -- [ 75s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto [ 75s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 75s] + xargs -0 -r rm [ 75s] + '[' armv7l == noarch ']' [ 75s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/perllocal.pod [ 75s] + FILES=perl-PerlIO-gzip.files [ 75s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0 -maxdepth 1 -type f [ 75s] + RES= [ 75s] + '[' -n '' ']' [ 75s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ [ 75s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ -type d [ 75s] ++ sort [ 75s] + for dir in '`find ${base_dir} -type d | sort`' [ 75s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 75s] + continue [ 75s] + for dir in '`find ${base_dir} -type d | sort`' [ 75s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 75s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi [ 75s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 75s] + el=armv7l-linux-thread-multi [ 75s] + all_dir=(${all_dir[@]} $el) [ 75s] + for dir in '`find ${base_dir} -type d | sort`' [ 75s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 75s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO [ 75s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 75s] + el=armv7l-linux-thread-multi/PerlIO [ 75s] + all_dir=(${all_dir[@]} $el) [ 75s] + for dir in '`find ${base_dir} -type d | sort`' [ 75s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 75s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto [ 75s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 75s] + el=armv7l-linux-thread-multi/auto [ 75s] + all_dir=(${all_dir[@]} $el) [ 75s] + for dir in '`find ${base_dir} -type d | sort`' [ 75s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 75s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO [ 75s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 75s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 75s] + all_dir=(${all_dir[@]} $el) [ 75s] + for dir in '`find ${base_dir} -type d | sort`' [ 75s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 75s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 75s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 75s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 75s] + all_dir=(${all_dir[@]} $el) [ 75s] + for i in '${all_dir[@]}' [ 75s] + '[' armv7l-linux-thread-multi = auto ']' [ 75s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 75s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi ']' [ 75s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 75s] + RES= [ 75s] + '[' -n '' ']' [ 75s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi [ 75s] + /bin/cat [ 75s] + for i in '${all_dir[@]}' [ 75s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 75s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 75s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/PerlIO ']' [ 75s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 75s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 75s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 75s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO [ 75s] + /bin/cat [ 75s] + for file in '$RES' [ 75s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 75s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 75s] + /bin/cat [ 75s] + for i in '${all_dir[@]}' [ 75s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 75s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 75s] + continue [ 75s] + for i in '${all_dir[@]}' [ 75s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 75s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 75s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 75s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 75s] + RES= [ 75s] + '[' -n '' ']' [ 75s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO [ 75s] + /bin/cat [ 75s] + for i in '${all_dir[@]}' [ 75s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 75s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 75s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 75s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 75s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 75s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 75s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 75s] + /bin/cat [ 75s] + for file in '$RES' [ 75s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 75s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 75s] + /bin/cat [ 75s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/share/man ']' [ 75s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 75s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/bin ']' [ 75s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.18-1.6 --unique-debug-src-base perl-PerlIO-gzip-0.18-1.6.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 76s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 76s] 158 blocks [ 76s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debuginfo.manifest [ 76s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debugsource.manifest [ 76s] + /usr/lib/rpm/check-buildroot [ 76s] + /usr/lib/rpm//brp-compress [ 76s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 76s] + /usr/lib/rpm/brp-python-hardlink [ 76s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 76s] Processing files: perl-PerlIO-gzip-0.18-1.6.armv7l [ 76s] Provides: perl(PerlIO::gzip) = 0.18 perl-PerlIO-gzip = 0.18-1.6 perl-PerlIO-gzip(armv7l-32) = 0.18-1.6 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 76s] Processing files: perl-PerlIO-gzip-debugsource-0.18-1.6.armv7l [ 76s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 76s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 76s] [ 76s] Provides: perl-PerlIO-gzip-debugsource = 0.18-1.6 perl-PerlIO-gzip-debugsource(armv7l-32) = 0.18-1.6 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Processing files: perl-PerlIO-gzip-debuginfo-0.18-1.6.armv7l [ 76s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 76s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 76s] [ 76s] Provides: perl-PerlIO-gzip-debuginfo = 0.18-1.6 perl-PerlIO-gzip-debuginfo(armv7l-32) = 0.18-1.6 [ 76s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 76s] Recommends: perl-PerlIO-gzip-debugsource(armv7l-32) = 0.18-1.6 [ 76s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 76s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.6.src.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-0.18-1.6.armv7l.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debugsource-0.18-1.6.armv7l.rpm [ 76s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debuginfo-0.18-1.6.armv7l.rpm [ 76s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.YDsIwc [ 77s] + umask 022 [ 77s] + cd /home/abuild/rpmbuild/BUILD [ 77s] + cd perl-PerlIO-gzip-0.18 [ 77s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 77s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.6.arm [ 77s] + exit 0 [ 77s] ... checking for files with abuild user/group [ 77s] ... creating baselibs [ 77s] ... comparing built packages with the former built [ 77s] /usr/lib/build/pkg-diff.sh [ 77s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.5.src.rpm /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.6.src.rpm [ 77s] This is not a prerelease project. Compare the project name. [ 77s] comparing rpmtags [ 77s] comparing RELEASE [ 77s] comparing PROVIDES [ 77s] comparing scripts [ 77s] comparing filelist [ 77s] comparing file checksum [ 77s] RPM meta information is identical [ 78s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-0.18-1.6.armv7l.rpm [ 78s] Comparing perl-PerlIO-gzip-0.18-1.5.armv7l.rpm to perl-PerlIO-gzip-0.18-1.6.armv7l.rpm [ 78s] This is not a prerelease project. Compare the project name. [ 78s] comparing rpmtags [ 78s] comparing RELEASE [ 78s] comparing PROVIDES [ 78s] comparing scripts [ 78s] comparing filelist [ 78s] comparing file checksum [ 78s] creating rename script [ 78s] RPM file checksum differs. [ 78s] Extracting packages [ 79s] /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so: only difference was in build-id or gnu_debuglink, GOOD. [ 79s] Package content is identical [ 79s] compare /.build.oldpackages/perl-PerlIO-gzip-debuginfo-0.18-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debuginfo-0.18-1.6.armv7l.rpm [ 79s] skipping -debuginfo package [ 79s] compare /.build.oldpackages/perl-PerlIO-gzip-debugsource-0.18-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debugsource-0.18-1.6.armv7l.rpm [ 79s] Comparing perl-PerlIO-gzip-debugsource-0.18-1.5.armv7l.rpm to perl-PerlIO-gzip-debugsource-0.18-1.6.armv7l.rpm [ 79s] This is not a prerelease project. Compare the project name. [ 79s] comparing rpmtags [ 79s] comparing RELEASE [ 79s] comparing PROVIDES [ 80s] comparing scripts [ 80s] comparing filelist [ 80s] --- /tmp/tmp.bpcd118663/tmp.EiDo118682 2021-03-03 11:35:10.015953443 +0000 [ 80s] +++ /tmp/tmp.bpcd118663/tmp.cREc118684 2021-03-03 11:35:10.023953149 +0000 [ 80s] @@ -1,2 +1,4 @@ [ 80s] /usr/src/debug/perl-PerlIO-gzip-@VERSION@-@RELEASE_LONG@.arm 0 (none) 40755 root root 0 4294967295 [ 80s] +/usr/src/debug/perl-PerlIO-gzip-@VERSION@-@RELEASE_LONG@.arm/gzip.c 0 (none) 100644 root root 0 4294967295 [ 80s] +/usr/src/debug/perl-PerlIO-gzip-@VERSION@-@RELEASE_LONG@.arm/gzip.xs 0 (none) 100644 root root 0 4294967295 [ 80s] [ 80s] RPM meta information is different [ 80s] [ 80s] obsnw06 finished "build perl-PerlIO-gzip.spec" at Wed Mar 3 11:35:10 UTC 2021. [ 80s] Retried build at Sun Mar 7 15:26:25 2021 returned same result, skipped Retried build at Mon Mar 8 03:47:03 2021 returned same result, skipped Retried build at Wed Mar 24 16:28:05 2021 returned same result, skipped Retried build at Wed Mar 31 09:42:26 2021 returned same result, skipped Retried build at Fri Apr 2 04:35:29 2021 returned same result, skipped Retried build at Mon May 3 07:31:21 2021 returned same result, skipped Retried build at Mon May 3 17:38:45 2021 returned same result, skipped