[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w26 started "build _service:gbs:pcre.spec" at Sun Jul 17 13:21:51 UTC 2016. [ 0s] [ 0s] Building pcre for project 'Tizen:Base' repository 'arm' arch 'armv7l' srcmd5 'a982dca0a28189627d969d19bb7c5344' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/39] preinstalling libmagic-data... [ 0s] [2/39] preinstalling setup... [ 1s] [3/39] preinstalling filesystem... [ 1s] [4/39] preinstalling glibc... [ 1s] [5/39] preinstalling libgcc... [ 1s] [6/39] preinstalling bash... [ 1s] [7/39] preinstalling diffutils... [ 1s] [8/39] preinstalling grep... [ 1s] [9/39] preinstalling libattr... [ 1s] [10/39] preinstalling libbz2... [ 1s] [11/39] preinstalling libcap... [ 1s] [12/39] preinstalling libelf... [ 1s] [13/39] preinstalling libfreebl3... [ 1s] [14/39] preinstalling liblua... [ 1s] [15/39] preinstalling liblzma... [ 1s] [16/39] preinstalling libncurses... [ 1s] [17/39] preinstalling libpopt... [ 1s] [18/39] preinstalling libsmack... [ 1s] [19/39] preinstalling libsqlite... [ 1s] [20/39] preinstalling libuuid... [ 1s] [21/39] preinstalling nspr... [ 1s] [22/39] preinstalling sed... [ 1s] [23/39] preinstalling zlib... [ 1s] [24/39] preinstalling qemu-accel-armv7l... [ 3s] [25/39] preinstalling qemu-linux-user-cross... [ 4s] [26/39] preinstalling coreutils... [ 4s] [27/39] preinstalling libacl... [ 4s] [28/39] preinstalling libblkid... [ 4s] [29/39] preinstalling libreadline... [ 4s] [30/39] preinstalling smack... [ 4s] [31/39] preinstalling bzip2... [ 4s] [32/39] preinstalling libmagic... [ 4s] [33/39] preinstalling libxml2... [ 4s] [34/39] preinstalling libmount... [ 4s] [35/39] preinstalling tar... [ 4s] [36/39] preinstalling util-linux... [ 4s] [37/39] preinstalling nss... [ 4s] [38/39] preinstalling libsoftokn3... [ 4s] [39/39] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 5s] [8/9] preinstalling libmount... [ 5s] [9/9] preinstalling util-linux... [ 5s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 10s] booting kvm ... [ 10s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 4982/2392064 files, 236245/9568256 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 14s] replacing /etc/mtab with symlink to /proc/self/mounts [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] swapon /dev/vdb [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 14s] mount: none is already mounted or /proc busy [ 14s] mount: none is already mounted or /dev/pts busy [ 14s] logging output to //.build.log... [ 14s] processing specfile /.build-srcdir/_service:gbs:pcre.spec ... [ 15s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 15s] running qemu-linux-user-cross postinstall script [ 15s] running qemu-accel-armv7l postinstall script [ 15s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 15s] running setup postinstall script [ 16s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 16s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 16s] initializing rpm db... [ 20s] [1/90] installing libmagic-data-5.18-1.12 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [2/90] installing setup-0.9-1.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [3/90] installing terminfo-base-5.9-1.14 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [4/90] installing filesystem-3.1-5.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [5/90] installing glibc-2.20-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [6/90] installing libatomic-4.9.2-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [7/90] installing libgcc-4.9.2-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [8/90] installing libgomp-4.9.2-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [9/90] installing bash-3.2.57-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [10/90] installing cpio-2.11-1.10 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [11/90] installing diffutils-3.3-1.11 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [12/90] installing findutils-4.3.8-2.11 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [13/90] installing hostname-3.12-1.8 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [14/90] installing libattr-2.4.47-1.13 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [15/90] installing libbz2-1.0.6-1.76 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [16/90] installing libcap-2.24-1.71 [ 31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [17/90] installing libelf-0.153-5.4 [ 33s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [18/90] installing libext2fs-1.42.13-1.1 [ 35s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [19/90] installing libfreebl3-3.23-4.16 [ 36s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [20/90] installing libitm-4.9.2-1.2 [ 37s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 38s] [21/90] installing libltdl-2.4.2-3.2 [ 38s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 38s] [22/90] installing liblua-5.1.4-1.15 [ 38s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [23/90] installing liblzma-5.1.3-2.4 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [24/90] installing libpcre-8.31-1.1 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [25/90] installing libpopt-1.16-2.4 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [26/90] installing libsmack-1.2.0-4.2 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [27/90] installing libsmartcols-2.28-1.3 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [28/90] installing libsqlite-3.8.10.2-1.12 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [29/90] installing libstdc++-4.9.2-1.2 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [30/90] installing libuuid-2.28-1.3 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [31/90] installing m4-1.4.17-1.1 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [32/90] installing net-tools-2.0_20121208git-1.9 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [33/90] installing nspr-4.12-4.9 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [34/90] installing patch-2.7-1.9 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [35/90] installing pkg-config-0.28-1.11 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [36/90] installing sed-4.1c-1.1 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [37/90] installing update-alternatives-1.16.3-1.1 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [38/90] installing which-2.20-1.1 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [39/90] installing zlib-1.2.8-1.13 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [40/90] installing libncurses-5.9-1.14 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [41/90] installing build-compare-2015.04.28-1.77 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [42/90] installing libstdc++-devel-4.9.2-1.2 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [43/90] installing qemu-linux-user-cross-2.2.0-1.2.1 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [44/90] installing cpp-4.9.2-1.2 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] [45/90] installing gcc-c++-4.9.2-1.2 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [46/90] installing binutils-2.25-1.2 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [47/90] installing coreutils-6.9-1.1 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [48/90] installing db4-4.8.30.NC-1.16 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [49/90] installing gawk-3.1.5-1.1 [ 54s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [50/90] installing grep-2.5.2-1.1 [ 55s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [51/90] installing less-466-1.1 [ 56s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [52/90] installing libacl-2.2.52-3.2 [ 56s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [53/90] installing libasm-0.153-5.4 [ 57s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [54/90] installing libblkid-2.28-1.3 [ 58s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [55/90] installing libreadline-5.2-2.3 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [56/90] installing libubsan-4.9.2-1.2 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [57/90] installing make-4.0-1.9 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [58/90] installing nss-certs-3.23-4.16 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 60s] [59/90] installing smack-1.2.0-4.2 [ 60s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 60s] [60/90] installing bzip2-1.0.6-1.76 [ 60s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 61s] [61/90] installing libmagic-5.18-1.12 [ 61s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 61s] [62/90] installing libxml2-2.8.0-4.2 [ 61s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 61s] [63/90] installing xz-5.1.3-2.4 [ 62s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 62s] [64/90] installing libdw-0.153-5.4 [ 62s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [65/90] installing linux-glibc-devel-3.10-1.3 [ 63s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [66/90] installing file-5.18-1.12 [ 63s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [67/90] installing glibc-locale-2.20-1.1 [ 63s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [68/90] installing libmount-2.28-1.3 [ 63s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 64s] [69/90] installing tar-1.17-1.1 [ 64s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 64s] [70/90] installing gzip-1.3.12-2.12 [ 64s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 64s] [71/90] installing libfdisk1-2.28-1.3 [ 64s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 64s] [72/90] installing pam-1.1.6-1.1 [ 64s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 64s] [73/90] installing perl-5.20.0-1.5 [ 69s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [74/90] installing tzdata-2014h-1.1 [ 70s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 70s] [75/90] installing elfutils-0.153-5.4 [ 70s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 70s] [76/90] installing gcc-4.9.2-1.2 [ 70s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 71s] [77/90] installing build-mkbaselibs-20120927-1.3 [ 71s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 71s] [78/90] installing glibc-devel-2.20-1.1 [ 71s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 71s] [79/90] installing qemu-accel-armv7l-0.4-7.8 [ 75s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 75s] [80/90] installing autoconf-2.69-1.5 [ 76s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 76s] [81/90] installing util-linux-2.28-1.3 [ 76s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 76s] [82/90] installing automake-1.14.1-1.4 [ 77s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 77s] [83/90] installing build-20120927-1.3 [ 77s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 77s] [84/90] installing libtool-2.4.2-3.2 [ 77s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 77s] [85/90] installing nss-3.23-4.16 [ 77s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 77s] [86/90] installing libsoftokn3-3.23-4.16 [ 78s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 78s] [87/90] installing rpm-4.11.0.1-7.2 [ 78s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 78s] [88/90] installing rpmlint-mini-1.5-1.1 [ 79s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 79s] [89/90] installing rpm-build-4.11.0.1-7.2 [ 80s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 81s] [90/90] installing rpmlint-tizen-1.0-1.1 [ 81s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 81s] removing nis flags from //etc/nsswitch.conf... [ 82s] now finalizing build dir... [ 83s] qemu: Unsupported syscall: 311 [ 90s] build target is armv7l-tizen-linux [ 90s] ----------------------------------------------------------------- [ 90s] I have the following modifications for pcre.spec: [ 90s] 5c5 [ 90s] < Release: 0 [ 90s] --- [ 90s] > Release: 1.15 [ 90s] 186a187 [ 90s] > %changelog [ 90s] ----------------------------------------------------------------- [ 90s] ----- building pcre.spec (user abuild) [ 90s] ----------------------------------------------------------------- [ 90s] ----------------------------------------------------------------- [ 90s] qemu: Unsupported syscall: 311 [ 90s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/arm/a982dca0a28189627d969d19bb7c5344-pcre' /home/abuild/rpmbuild/SOURCES/pcre.spec [ 90s] Building target platforms: armv7l-tizen-linux [ 90s] Building for target armv7l-tizen-linux [ 90s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.RnWq4v [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + rm -rf pcre-8.31 [ 90s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.31.tar.bz2 [ 90s] + /bin/tar -xf - [ 90s] + STATUS=0 [ 90s] + '[' 0 -ne 0 ']' [ 90s] + cd pcre-8.31 [ 90s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 90s] + echo 'Patch #0 (0001-visibility.patch):' [ 90s] Patch #0 (0001-visibility.patch): [ 90s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-visibility.patch [ 90s] + /bin/patch -p1 --fuzz=2 [ 90s] patching file Makefile.am [ 90s] patching file configure.ac [ 90s] patching file m4/visibility.m4 [ 90s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 90s] + exit 0 [ 90s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Z1ka1q [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd pcre-8.31 [ 90s] ++ uname -m [ 90s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 90s] + LANG=C [ 90s] + export LANG [ 90s] + unset DISPLAY [ 90s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 90s] + export CFLAGS [ 90s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 90s] + export CXXFLAGS [ 90s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 90s] + export FFLAGS [ 90s] + LDFLAGS= [ 90s] + export LDFLAGS [ 90s] + LD_AS_NEEDED=1 [ 90s] + export LD_AS_NEEDED [ 90s] + autoreconf -fiv [ 96s] autoreconf: Entering directory `.' [ 96s] autoreconf: configure.ac: not using Gettext [ 97s] autoreconf: running: aclocal --force -I m4 [ 105s] autoreconf: configure.ac: tracing [ 107s] autoreconf: running: libtoolize --copy --force [ 107s] libtoolize: putting auxiliary files in `.'. [ 107s] libtoolize: copying file `./ltmain.sh' [ 107s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 107s] libtoolize: copying file `m4/libtool.m4' [ 107s] libtoolize: copying file `m4/ltoptions.m4' [ 107s] libtoolize: copying file `m4/ltsugar.m4' [ 107s] libtoolize: copying file `m4/ltversion.m4' [ 107s] libtoolize: copying file `m4/lt~obsolete.m4' [ 117s] autoreconf: running: /usr/bin/autoconf --force [ 121s] autoreconf: running: /usr/bin/autoheader --force [ 124s] autoreconf: running: automake --add-missing --copy --force-missing [ 127s] configure.ac:48: installing './compile' [ 130s] parallel-tests: installing './test-driver' [ 130s] autoreconf: Leaving directory `.' [ 130s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 130s] + export CFLAGS [ 130s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 130s] + export CXXFLAGS [ 130s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 130s] + export FFLAGS [ 130s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 131s] checking for a BSD-compatible install... /bin/install -c [ 131s] checking whether build environment is sane... yes [ 131s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 131s] checking for gawk... gawk [ 131s] checking whether make sets $(MAKE)... yes [ 131s] checking whether make supports nested variables... yes [ 131s] checking whether make supports nested variables... (cached) yes [ 131s] checking for style of include used by make... GNU [ 131s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 131s] checking whether the C compiler works... yes [ 131s] checking for C compiler default output file name... a.out [ 131s] checking for suffix of executables... [ 131s] checking whether we are cross compiling... no [ 131s] checking for suffix of object files... o [ 131s] checking whether we are using the GNU C compiler... yes [ 131s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 131s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 131s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 131s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 131s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... -std=gnu99 [ 131s] checking for armv7l-tizen-linux-gnueabi-gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 131s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -std=gnu99 -E [ 131s] checking for grep that handles long lines and -e... /bin/grep [ 131s] checking for egrep... /bin/grep -E [ 131s] checking for ANSI C header files... yes [ 131s] checking for sys/types.h... yes [ 132s] checking for sys/stat.h... yes [ 132s] checking for stdlib.h... yes [ 132s] checking for string.h... yes [ 132s] checking for memory.h... yes [ 132s] checking for strings.h... yes [ 132s] checking for inttypes.h... yes [ 132s] checking for stdint.h... yes [ 132s] checking for unistd.h... yes [ 132s] checking minix/config.h usability... no [ 132s] checking minix/config.h presence... no [ 132s] checking for minix/config.h... no [ 132s] checking whether it is safe to define __EXTENSIONS__... yes [ 132s] checking for special C compiler options needed for large files... no [ 132s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 132s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 132s] checking whether we are using the GNU C++ compiler... yes [ 132s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 132s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 132s] checking whether the -Werror option is usable... yes [ 132s] checking for simple visibility declarations... yes [ 132s] checking for int64_t... yes [ 132s] checking build system type... armv7l-tizen-linux-gnueabi [ 132s] checking host system type... armv7l-tizen-linux-gnueabi [ 132s] checking how to print strings... printf [ 132s] checking for a sed that does not truncate output... /bin/sed [ 132s] checking for fgrep... /bin/grep -F [ 132s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc -std=gnu99... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 132s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 132s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 132s] checking the name lister (/bin/nm -B) interface... BSD nm [ 132s] checking whether ln -s works... yes [ 132s] checking the maximum length of command line arguments... 1572864 [ 132s] checking whether the shell understands some XSI constructs... yes [ 132s] checking whether the shell understands "+="... yes [ 132s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 132s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 132s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 132s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 132s] checking for objdump... objdump [ 132s] checking how to recognize dependent libraries... pass_all [ 132s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 132s] checking for dlltool... no [ 132s] checking how to associate runtime and link libraries... printf %s\n [ 132s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 132s] checking for ar... ar [ 132s] checking for archiver @FILE support... @ [ 132s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 132s] checking for strip... strip [ 132s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 132s] checking for ranlib... ranlib [ 132s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc -std=gnu99 object... ok [ 132s] checking for sysroot... no [ 132s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 132s] checking for mt... no [ 132s] checking if : is a manifest tool... no [ 133s] checking for dlfcn.h... yes [ 133s] checking for objdir... .libs [ 133s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no [ 133s] checking for armv7l-tizen-linux-gnueabi-gcc -std=gnu99 option to produce PIC... -fPIC -DPIC [ 133s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes [ 133s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 static flag -static works... no [ 133s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -c -o file.o... yes [ 133s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -c -o file.o... (cached) yes [ 133s] checking whether the armv7l-tizen-linux-gnueabi-gcc -std=gnu99 linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 133s] checking whether -lc should be explicitly linked in... no [ 133s] checking dynamic linker characteristics... GNU/Linux ld.so [ 133s] checking how to hardcode library paths into programs... immediate [ 133s] checking whether stripping libraries is possible... yes [ 133s] checking if libtool supports shared libraries... yes [ 133s] checking whether to build shared libraries... yes [ 133s] checking whether to build static libraries... yes [ 133s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 133s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 133s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 133s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 133s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 133s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 133s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 133s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 133s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 133s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 133s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 133s] checking how to hardcode library paths into programs... immediate [ 133s] checking whether ln -s works... yes [ 133s] checking for ANSI C header files... (cached) yes [ 133s] checking limits.h usability... yes [ 133s] checking limits.h presence... yes [ 133s] checking for limits.h... yes [ 133s] checking for sys/types.h... (cached) yes [ 133s] checking for sys/stat.h... (cached) yes [ 133s] checking dirent.h usability... yes [ 133s] checking dirent.h presence... yes [ 133s] checking for dirent.h... yes [ 133s] checking windows.h usability... no [ 133s] checking windows.h presence... no [ 133s] checking for windows.h... no [ 133s] checking for alias support in the linker... no [ 133s] checking for alias support in the linker... no [ 133s] checking string usability... yes [ 133s] checking string presence... yes [ 133s] checking for string... yes [ 134s] checking bits/type_traits.h usability... no [ 134s] checking bits/type_traits.h presence... no [ 134s] checking for bits/type_traits.h... no [ 134s] checking type_traits.h usability... no [ 134s] checking type_traits.h presence... no [ 134s] checking for type_traits.h... no [ 134s] checking for strtoq... yes [ 134s] checking for long long... yes [ 134s] checking for unsigned long long... yes [ 134s] checking for an ANSI C-conforming const... yes [ 134s] checking for size_t... yes [ 134s] checking for bcopy... yes [ 134s] checking for memmove... yes [ 134s] checking for strerror... yes [ 134s] checking zlib.h usability... no [ 134s] checking zlib.h presence... no [ 134s] checking for zlib.h... no [ 134s] checking for gzopen in -lz... no [ 134s] checking bzlib.h usability... no [ 134s] checking bzlib.h presence... no [ 134s] checking for bzlib.h... no [ 134s] checking for libbz2... no [ 134s] checking that generated files are newer than configure... done [ 134s] configure: creating ./config.status [ 135s] config.status: creating Makefile [ 135s] config.status: creating libpcre.pc [ 135s] config.status: creating libpcre16.pc [ 135s] config.status: creating libpcreposix.pc [ 135s] config.status: creating libpcrecpp.pc [ 135s] config.status: creating pcre-config [ 135s] config.status: creating pcre.h [ 135s] config.status: creating pcre_stringpiece.h [ 135s] config.status: creating pcrecpparg.h [ 135s] config.status: creating config.h [ 135s] config.status: executing depfiles commands [ 136s] config.status: executing libtool commands [ 136s] config.status: executing script-chmod commands [ 136s] config.status: executing delete-old-chartables commands [ 136s] [ 136s] pcre-8.31 configuration summary: [ 136s] [ 136s] Install prefix .................. : /usr [ 136s] C preprocessor .................. : armv7l-tizen-linux-gnueabi-gcc -std=gnu99 -E [ 136s] C compiler ...................... : armv7l-tizen-linux-gnueabi-gcc -std=gnu99 [ 136s] C++ preprocessor ................ : armv7l-tizen-linux-gnueabi-g++ -E [ 136s] C++ compiler .................... : armv7l-tizen-linux-gnueabi-g++ [ 136s] Linker .......................... : /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 136s] C preprocessor flags ............ : [ 136s] C compiler flags ................ : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g [ 136s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g [ 136s] Linker flags .................... : [ 136s] Extra libraries ................. : [ 136s] [ 136s] Build 8 bit pcre library ........ : yes [ 136s] Build 16 bit pcre library ....... : no [ 136s] Build C++ library ............... : yes [ 136s] Enable JIT compiling support .... : yes [ 136s] Enable UTF-8/16 support ......... : yes [ 136s] Unicode properties .............. : yes [ 136s] Newline char/sequence ........... : lf [ 136s] \R matches only ANYCRLF ......... : no [ 136s] EBCDIC coding ................... : no [ 136s] Rebuild char tables ............. : no [ 136s] Use stack recursion ............. : yes [ 136s] POSIX mem threshold ............. : 10 [ 136s] Internal link size .............. : 2 [ 136s] Match limit ..................... : 10000000 [ 136s] Match limit recursion ........... : MATCH_LIMIT [ 136s] Build shared libs ............... : yes [ 136s] Build static libs ............... : yes [ 136s] Use JIT in pcregrep ............. : yes [ 136s] Buffer size for pcregrep ........ : 20480 [ 136s] Link pcregrep with libz ......... : no [ 136s] Link pcregrep with libbz2 ....... : no [ 136s] Link pcretest with libedit ...... : no [ 136s] Link pcretest with libreadline .. : no [ 136s] [ 136s] + make -j4 [ 136s] rm -f pcre_chartables.c [ 136s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 136s] make all-am [ 136s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 136s] CC libpcre_la-pcre_byte_order.lo [ 136s] CC libpcre_la-pcre_config.lo [ 136s] CC libpcre_la-pcre_compile.lo [ 136s] CC libpcre_la-pcre_dfa_exec.lo [ 136s] CC libpcre_la-pcre_exec.lo [ 136s] CC libpcre_la-pcre_fullinfo.lo [ 137s] CC libpcre_la-pcre_get.lo [ 137s] CC libpcre_la-pcre_globals.lo [ 137s] CC libpcre_la-pcre_jit_compile.lo [ 137s] In file included from sljit/sljitLir.c:1247:0, [ 137s] from pcre_jit_compile.c:62: [ 137s] sljit/sljitNativeARM_Thumb2.c: In function 'getput_arg': [ 137s] sljit/sljitNativeARM_Thumb2.c:1018:6: warning: variable 'tmp_r' set but not used [-Wunused-but-set-variable] [ 137s] int tmp_r; [ 137s] ^ [ 140s] CC libpcre_la-pcre_maketables.lo [ 140s] CC libpcre_la-pcre_newline.lo [ 140s] CC libpcre_la-pcre_ord2utf8.lo [ 140s] CC libpcre_la-pcre_refcount.lo [ 141s] CC libpcre_la-pcre_string_utils.lo [ 141s] CC libpcre_la-pcre_study.lo [ 141s] CC libpcre_la-pcre_tables.lo [ 141s] CC libpcre_la-pcre_ucd.lo [ 141s] CC libpcre_la-pcre_valid_utf8.lo [ 142s] CC libpcre_la-pcre_version.lo [ 142s] CC libpcre_la-pcre_xclass.lo [ 142s] CC libpcre_la-pcre_chartables.lo [ 142s] CC libpcreposix_la-pcreposix.lo [ 142s] CXX libpcrecpp_la-pcrecpp.lo [ 142s] CXX libpcrecpp_la-pcre_scanner.lo [ 143s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 143s] CC pcretest.o [ 143s] CC pcre_printint.o [ 143s] CC pcregrep-pcregrep.o [ 144s] CC pcre_jit_test.o [ 144s] CXX pcrecpp_unittest.o [ 144s] CXX pcre_scanner_unittest.o [ 145s] CXX pcre_stringpiece_unittest.o [ 148s] CCLD libpcre.la [ 148s] CCLD libpcreposix.la [ 148s] CXXLD libpcrecpp.la [ 148s] CCLD pcre_jit_test [ 148s] CCLD pcretest [ 148s] CCLD pcregrep [ 149s] CXXLD pcrecpp_unittest [ 149s] CXXLD pcre_scanner_unittest [ 149s] CXXLD pcre_stringpiece_unittest [ 149s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 149s] + exit 0 [ 149s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.zPaNVT [ 149s] + umask 022 [ 149s] + cd /home/abuild/rpmbuild/BUILD [ 149s] + cd pcre-8.31 [ 149s] + LANG=C [ 149s] + export LANG [ 149s] + unset DISPLAY [ 149s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm [ 149s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm [ 149s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm install [ 149s] /bin/make install-am [ 149s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 149s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 149s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib' [ 149s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib' [ 149s] libtool: install: /bin/install -c .libs/libpcre.so.1.0.1 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcre.so.1.0.1 [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib && { ln -s -f libpcre.so.1.0.1 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.0.1 libpcre.so.1; }; }) [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib && { ln -s -f libpcre.so.1.0.1 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.0.1 libpcre.so; }; }) [ 149s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcre.la [ 149s] libtool: install: warning: relinking `libpcreposix.la' [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.31; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.31/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -std=gnu99 -fvisibility=hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -no-undefined -version-info 0:1:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm) [ 149s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.1T /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcreposix.so.0.0.1 [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.1 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.1 libpcreposix.so.0; }; }) [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.1 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.1 libpcreposix.so; }; }) [ 149s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcreposix.la [ 149s] libtool: install: warning: relinking `libpcrecpp.la' [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.31; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.31/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -fvisibility=hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -no-undefined -version-info 0:0:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm) [ 149s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcrecpp.so.0.0.0 [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so.0; }; }) [ 149s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so; }; }) [ 149s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcrecpp.la [ 149s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcre.a [ 149s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcre.a [ 149s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcre.a [ 149s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcreposix.a [ 149s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcreposix.a [ 149s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcreposix.a [ 149s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcrecpp.a [ 149s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcrecpp.a [ 149s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcrecpp.a [ 149s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 149s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin' [ 149s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin' [ 149s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 149s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 149s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.31/libpcre.la' has not been installed in `/usr/lib' [ 149s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin/pcretest [ 149s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 149s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 149s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.31/libpcre.la' has not been installed in `/usr/lib' [ 149s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin/pcregrep [ 149s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin' [ 149s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre' [ 150s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre/html' [ 150s] /bin/install -c -m 644 doc/html/index.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre-config.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre/html' [ 150s] /bin/install -c -m 644 doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre/html' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre/html' [ 150s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre/html' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/include' [ 150s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/include' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man1' [ 150s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man1' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3' [ 150s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3' [ 150s] /bin/install -c -m 644 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/include' [ 150s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/include' [ 150s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/pkgconfig' [ 150s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/pkgconfig' [ 150s] /bin/make install-data-hook [ 150s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 150s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 150s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_compile.3 [ 150s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_compile2.3 [ 150s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_config.3 [ 150s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 150s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 150s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 150s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_exec.3 [ 150s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_free_study.3 [ 150s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_free_substring.3 [ 150s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 150s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 150s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 150s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 150s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 150s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_get_substring.3 [ 150s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 150s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 150s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 150s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_maketables.3 [ 150s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 150s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_refcount.3 [ 150s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_study.3 [ 150s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 150s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/man/man3/pcre16_version.3 [ 150s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 150s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 150s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 150s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/info/dir [ 150s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm -regex '.*\.la$' [ 150s] + xargs rm -f -- [ 150s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm//usr/share/doc/packages [ 150s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm//usr/share/doc/packages/pcre-doc [ 150s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/*.la' [ 150s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pcre-8.31 [ 150s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin/pcregrep [ 151s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/bin/pcretest [ 151s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcre.so.1.0.1 [ 151s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcrecpp.so.0.0.0 [ 151s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/lib/libpcreposix.so.0.0.1 [ 152s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 152s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 152s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 152s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 152s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 152s] 3546 blocks [ 152s] + /usr/lib/rpm/check-buildroot [ 152s] + /usr/lib/rpm//brp-compress [ 152s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 153s] + /usr/lib/rpm/brp-python-hardlink [ 153s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm [ 153s] Processing files: pcre-debugsource-8.31-1.15.armv7l [ 153s] Provides: pcre-debugsource = 8.31-1.15 pcre-debugsource(armv7l-32) = 8.31-1.15 [ 153s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 153s] Processing files: pcre-devel-8.31-1.15.armv7l [ 153s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 153s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 153s] [ 154s] Provides: pcre-devel = 8.31-1.15 pcre-devel(armv7l-32) = 8.31-1.15 pkgconfig(libpcre) = 8.31 pkgconfig(libpcrecpp) = 8.31 pkgconfig(libpcreposix) = 8.31 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1 libpcrecpp.so.0 libpcreposix.so.0 pkgconfig(libpcre) [ 154s] Processing files: pcre-devel-static-8.31-1.15.armv7l [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Provides: pcre-devel-static = 8.31-1.15 pcre-devel-static(armv7l-32) = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Processing files: libpcre-8.31-1.15.armv7l [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.W1ZvjF [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd pcre-8.31 [ 154s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcre [ 154s] + export LICENSEDIR [ 154s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcre [ 154s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcre [ 154s] + exit 0 [ 154s] Provides: libpcre = 8.31-1.15 libpcre(armv7l-32) = 8.31-1.15 libpcre.so.1 pcre = 8.31 [ 154s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Requires(post): /sbin/ldconfig [ 154s] Requires(postun): /sbin/ldconfig [ 154s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 154s] Obsoletes: pcre < 8.31 [ 154s] Processing files: libpcreposix-8.31-1.15.armv7l [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.0XgM0q [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd pcre-8.31 [ 154s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcreposix [ 154s] + export LICENSEDIR [ 154s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcreposix [ 154s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcreposix [ 154s] + exit 0 [ 154s] Provides: libpcreposix = 8.31-1.15 libpcreposix(armv7l-32) = 8.31-1.15 libpcreposix.so.0 [ 154s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Requires(post): /sbin/ldconfig [ 154s] Requires(postun): /sbin/ldconfig [ 154s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 rtld(GNU_HASH) [ 154s] Processing files: libpcrecpp-8.31-1.15.armv7l [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.HgVa1c [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd pcre-8.31 [ 154s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcrecpp [ 154s] + export LICENSEDIR [ 154s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcrecpp [ 154s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/libpcrecpp [ 154s] + exit 0 [ 154s] Provides: libpcrecpp = 8.31-1.15 libpcrecpp(armv7l-32) = 8.31-1.15 libpcrecpp.so.0 [ 154s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Requires(post): /sbin/ldconfig [ 154s] Requires(postun): /sbin/ldconfig [ 154s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 154s] Processing files: pcre-doc-8.31-1.15.noarch [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.84rLkZ [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd pcre-8.31 [ 154s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/packages/pcre-doc [ 154s] + export DOCDIR [ 154s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/packages/pcre-doc [ 154s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/packages/pcre-doc [ 154s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/doc/packages/pcre-doc [ 154s] + exit 0 [ 154s] Provides: pcre-doc = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Processing files: pcre-tools-8.31-1.15.armv7l [ 154s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 154s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 154s] [ 154s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.pileAM [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd pcre-8.31 [ 154s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/pcre-tools [ 154s] + export LICENSEDIR [ 154s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/pcre-tools [ 154s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm/usr/share/licenses/pcre-tools [ 154s] + exit 0 [ 154s] Provides: pcre-tools = 8.31-1.15 pcre-tools(armv7l-32) = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 rtld(GNU_HASH) [ 154s] Processing files: libpcre-debuginfo-8.31-1.15.armv7l [ 154s] Provides: libpcre-debuginfo = 8.31-1.15 libpcre-debuginfo(armv7l-32) = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Processing files: libpcreposix-debuginfo-8.31-1.15.armv7l [ 154s] Provides: libpcreposix-debuginfo = 8.31-1.15 libpcreposix-debuginfo(armv7l-32) = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Processing files: libpcrecpp-debuginfo-8.31-1.15.armv7l [ 154s] Provides: libpcrecpp-debuginfo = 8.31-1.15 libpcrecpp-debuginfo(armv7l-32) = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Processing files: pcre-tools-debuginfo-8.31-1.15.armv7l [ 154s] warning: File listed twice: /usr/lib/debug/.build-id [ 154s] Provides: pcre-tools-debuginfo = 8.31-1.15 pcre-tools-debuginfo(armv7l-32) = 8.31-1.15 [ 154s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 154s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm [ 154s] warning: Could not canonicalize hostname: w26 [ 154s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.31-1.15.src.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.31-1.15.armv7l.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.31-1.15.armv7l.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.31-1.15.armv7l.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.31-1.15.armv7l.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.31-1.15.armv7l.rpm [ 155s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.31-1.15.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.31-1.15.noarch.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.31-1.15.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.31-1.15.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.31-1.15.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.31-1.15.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.31-1.15.armv7l.rpm [ 156s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.IzP0z2 [ 156s] + umask 022 [ 156s] + cd /home/abuild/rpmbuild/BUILD [ 156s] + cd pcre-8.31 [ 156s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-1.15.arm [ 156s] + exit 0 [ 156s] ... checking for files with abuild user/group [ 156s] [ 156s] RPMLINT report: [ 156s] =============== [ 156s] qemu: Unsupported syscall: 311 [ 159s] pcre-devel-static.armv7l: W: static-library-without-debuginfo /usr/lib/libpcreposix.a [ 159s] pcre-devel-static.armv7l: W: static-library-without-debuginfo /usr/lib/libpcrecpp.a [ 159s] pcre-devel-static.armv7l: W: static-library-without-debuginfo /usr/lib/libpcre.a [ 159s] The static library doesn't contain any debuginfo. Binaries linking against [ 159s] this static library can't be properly debugged. [ 159s] [ 159s] pcre-devel.armv7l: W: rpath-in-buildconfig /usr/bin/pcre-config lines ['37'] [ 159s] This build configuration file contains rpaths which will be introduced into [ 159s] dependent packages. [ 159s] [ 159s] pcre-doc.noarch: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/pcre-doc/COPYING [ 159s] A file whose name suggests that it contains a license is included in the [ 159s] package as a document. Such files need to be marked with %license and not with [ 159s] %doc, which will install them in a special directory seperated from the [ 159s] documentation. [ 159s] [ 159s] 8 packages and 0 specfiles checked; 1 errors, 4 warnings. [ 159s] [ 159s] ... creating baselibs [ 159s] qemu: Unsupported syscall: 311 [ 160s] no targets for arch armv7l, nothing to do [ 160s] ... saving built statistics [ 160s] ... saving built packages [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.31-1.15.armv7l.rpm [ 160s] /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.31-1.15.noarch.rpm [ 160s] /home/abuild/rpmbuild/SRPMS/pcre-8.31-1.15.src.rpm [ 160s] /home/abuild/rpmbuild/OTHER/_statistics [ 160s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 160s] [ 160s] w26 finished "build pcre.spec" at Sun Jul 17 13:24:31 UTC 2016. [ 160s] [ 163s] [ 151.560251] SysRq : Power Off [ 163s] [ 151.567886] Power down. [ 164s] build: extracting built packages... [ 164s] libpcre-8.31-1.15.armv7l.rpm [ 164s] libpcre-debuginfo-8.31-1.15.armv7l.rpm [ 164s] libpcrecpp-8.31-1.15.armv7l.rpm [ 164s] libpcrecpp-debuginfo-8.31-1.15.armv7l.rpm [ 164s] libpcreposix-8.31-1.15.armv7l.rpm [ 164s] libpcreposix-debuginfo-8.31-1.15.armv7l.rpm [ 164s] pcre-debugsource-8.31-1.15.armv7l.rpm [ 164s] pcre-devel-8.31-1.15.armv7l.rpm [ 164s] pcre-devel-static-8.31-1.15.armv7l.rpm [ 164s] pcre-tools-8.31-1.15.armv7l.rpm [ 164s] pcre-tools-debuginfo-8.31-1.15.armv7l.rpm [ 164s] pcre-doc-8.31-1.15.noarch.rpm [ 164s] pcre-8.31-1.15.src.rpm [ 164s] _statistics [ 164s] rpmlint.log Retried build at Sun Jul 17 07:31:37 2016 returned same result, skipped Retried build at Sun Jul 17 08:43:00 2016 returned same result, skipped Retried build at Sun Jul 17 10:24:22 2016 returned same result, skipped