[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw06 started "build _service:gbs:perl-Test-Pod-Coverage.spec" at Tue Apr 17 03:25:55 UTC 2018. [ 0s] [ 0s] Building perl-Test-Pod-Coverage for project 'Tizen:Base' repository 'standard' arch 'aarch64' srcmd5 '256f8f945c76a127702514c73498201d' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [26/40] preinstalling coreutils... [ 8s] [27/40] preinstalling libacl... [ 8s] [28/40] preinstalling libblkid... [ 8s] [29/40] preinstalling libreadline... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/96] installing libmagic-data-5.32-10.74 [ 9s] [2/96] installing setup-0.9-5.12 [ 9s] [3/96] installing filesystem-3.1-6.1 [ 9s] [4/96] installing glibc-2.24-9.31 [ 9s] [5/96] installing bash-3.2.57-6.1 [ 9s] [6/96] installing binutils-2.27-10.37 [ 9s] [7/96] installing cpio-2.11-3.1 [ 9s] [8/96] installing diffutils-3.3-3.1 [ 9s] [9/96] installing findutils-4.3.8-5.198 [ 9s] [10/96] installing hostname-3.12-4.1 [ 9s] [11/96] installing libatomic-6.2.1-23.2 [ 10s] [12/96] installing libattr-2.4.47-5.49 [ 10s] [13/96] installing libbz2-1.0.6-4.242 [ 10s] [14/96] installing libcap-2.24-4.262 [ 10s] [15/96] installing libelf-0.153-3.84 [ 10s] [16/96] installing libext2fs-1.43.4-6.1 [ 10s] [17/96] installing libfreebl3-3.34.1-5.56 [ 10s] [18/96] installing libgcc-6.2.1-23.2 [ 10s] [19/96] installing libgomp-6.2.1-23.2 [ 10s] [20/96] installing libitm-6.2.1-23.2 [ 10s] [21/96] installing libltdl-2.4.2-4.214 [ 10s] [22/96] installing liblua-5.1.4-3.36 [ 10s] [23/96] installing liblzma-5.2.3-5.74 [ 10s] [24/96] installing libpcre-8.41-5.1 [ 10s] [25/96] installing libpopt-1.16-4.36 [ 10s] [26/96] installing libsmack-1.3.1-5.70 [ 10s] [27/96] installing libsmartcols-2.30-8.1 [ 10s] [28/96] installing libsqlite-3.21.0-10.13 [ 10s] [29/96] installing libuuid-2.30-8.1 [ 10s] [30/96] installing m4-1.4.17-3.1 [ 10s] [31/96] installing net-tools-2.0_20121208git-3.1 [ 10s] [32/96] installing nspr-4.12-4.16 [ 11s] [33/96] installing patch-2.7-3.36 [ 11s] [34/96] installing pkg-config-0.28-5.199 [ 11s] [35/96] installing sed-4.1c-4.1 [ 11s] [36/96] installing update-alternatives-1.18.15-3.1 [ 11s] [37/96] installing which-2.20-6.1 [ 11s] [38/96] installing zlib-1.2.11-4.256 [ 11s] [39/96] installing build-compare-2015.04.28-3.105 [ 11s] [40/96] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 12s] [41/96] installing terminfo-base-full-5.9-5.156 [ 12s] [42/96] installing coreutils-6.9-3.1 [ 12s] [43/96] installing cpp-6.2.1-23.2 [ 13s] [44/96] installing gawk-3.1.5-5.1 [ 13s] [45/96] installing gcc-c++-6.2.1-23.2 [ 13s] [46/96] installing grep-2.5.2-6.1 [ 13s] [47/96] installing libacl-2.2.52-5.71 [ 13s] [48/96] installing libasm-0.153-3.84 [ 13s] [49/96] installing libblkid-2.30-8.1 [ 13s] [50/96] installing libgfortran-6.2.1-23.2 [ 13s] [51/96] installing libstdc++-6.2.1-23.2 [ 14s] [52/96] installing make-4.0-4.15 [ 14s] [53/96] installing nss-certs-3.34.1-5.56 [ 14s] [54/96] installing smack-1.3.1-5.70 [ 14s] [55/96] installing bzip2-1.0.6-4.242 [ 14s] [56/96] installing libmagic-5.32-10.74 [ 14s] [57/96] installing libxml2-2.9.7-6.88 [ 14s] [58/96] installing xz-5.2.3-5.74 [ 14s] [59/96] installing libdw-0.153-3.84 [ 14s] [60/96] installing libstdc++-devel-6.2.1-23.2 [ 14s] [61/96] installing file-5.32-10.74 [ 14s] [62/96] installing libmount-2.30-8.1 [ 14s] [63/96] installing libncurses-5.9-5.156 [ 14s] [64/96] installing libncurses6-5.9-5.156 [ 14s] [65/96] installing linux-glibc-devel-3.10-3.269 [ 15s] [66/96] installing tar-1.17-4.1 [ 15s] [67/96] installing db4-4.8.30.NC-3.245 [ 15s] [68/96] installing glibc-locale-2.24-9.31 [ 15s] [69/96] installing gzip-1.3.12-7.31 [ 15s] [70/96] installing libcc1-6.2.1-23.2 [ 15s] [71/96] installing libfdisk-2.30-8.1 [ 15s] [72/96] installing libubsan-6.2.1-23.2 [ 15s] [73/96] installing pam-1.1.6-4.1 [ 15s] [74/96] installing tzdata-2018c-8.1 [ 15s] [75/96] installing elfutils-0.153-3.84 [ 15s] [76/96] installing glibc-devel-2.24-9.31 [ 16s] [77/96] installing less-466-8.1 [ 16s] [78/96] installing libreadline-5.2-4.45 [ 16s] [79/96] installing procps-ng-3.3.12-6.1 [ 16s] [80/96] installing perl-5.20.0-6.1 [ 17s] [81/96] installing gcc-6.2.1-23.2 [ 18s] [82/96] installing build-mkbaselibs-20120927-3.1 [ 18s] [83/96] installing perl-Devel-Symdump-2.08-5.3 [ 18s] [84/96] installing perl-Test-Pod-1.45-4.3 [ 18s] [85/96] installing qemu-accel-x86_64-aarch64-0.4-12.4 [ 24s] [86/96] installing autoconf-2.69-5.6 [ 24s] [87/96] installing util-linux-2.30-8.1 [ 25s] [88/96] installing perl-Pod-Coverage-0.22-3.3 [ 25s] [89/96] installing automake-1.15.1-6.26 [ 25s] [90/96] installing util-linux-su-2.30-8.1 [ 25s] [91/96] installing build-20120927-3.1 [ 25s] [92/96] installing libtool-2.4.2-4.214 [ 25s] [93/96] installing nss-3.34.1-5.56 [ 25s] [94/96] installing libsoftokn3-3.34.1-5.56 [ 25s] [95/96] installing rpm-4.11.0.1-8.63 [ 25s] [96/96] installing rpm-build-4.11.0.1-8.63 [ 25s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 25s] now finalizing build dir... [ 26s] build target is aarch64-tizen-linux [ 26s] ----------------------------------------------------------------- [ 26s] I have the following modifications for perl-Test-Pod-Coverage.spec: [ 26s] 22c22 [ 26s] < Release: 0 [ 26s] --- [ 26s] > Release: 3.3 [ 26s] ----------------------------------------------------------------- [ 26s] ----- building perl-Test-Pod-Coverage.spec (user abuild) [ 26s] ----------------------------------------------------------------- [ 26s] ----------------------------------------------------------------- [ 26s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/256f8f945c76a127702514c73498201d-perl-Test-Pod-Coverage' -ba /home/abuild/rpmbuild/SOURCES/perl-Test-Pod-Coverage.spec [ 27s] Building target platforms: aarch64-tizen-linux [ 27s] Building for target aarch64-tizen-linux [ 27s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.dqBZcG [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + rm -rf Test-Pod-Coverage-1.08 [ 27s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Test-Pod-Coverage-1.08.tar.gz [ 27s] + /bin/tar -xf - [ 27s] + STATUS=0 [ 27s] + '[' 0 -ne 0 ']' [ 27s] + cd Test-Pod-Coverage-1.08 [ 27s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 27s] + cp /home/abuild/rpmbuild/SOURCES/perl-Test-Pod-Coverage.manifest . [ 27s] + exit 0 [ 27s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.fnBUvh [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd Test-Pod-Coverage-1.08 [ 27s] ++ uname -m [ 27s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 27s] + ref=/usr/lib/rpm [ 27s] + for s in guess sub [ 27s] ++ find -maxdepth 8 -name config.guess [ 27s] + for s in guess sub [ 27s] ++ find -maxdepth 8 -name config.sub [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 27s] + export CFLAGS [ 27s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 27s] + export CXXFLAGS [ 27s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 27s] + export FFLAGS [ 27s] + LDFLAGS= [ 27s] + export LDFLAGS [ 27s] + LD_AS_NEEDED=1 [ 27s] + export LD_AS_NEEDED [ 27s] + perl Makefile.PL INSTALLDIRS=vendor [ 28s] Checking if your kit is complete... [ 28s] Looks good [ 29s] Generating a Unix-style Makefile [ 29s] Writing Makefile for Test::Pod::Coverage [ 29s] Writing MYMETA.yml and MYMETA.json [ 29s] + make -j4 [ 30s] cp Coverage.pm blib/lib/Test/Pod/Coverage.pm [ 30s] Manifying blib/man3/Test::Pod::Coverage.3pm [ 30s] + exit 0 [ 30s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.r68eR1 [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd Test-Pod-Coverage-1.08 [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64 [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64 [ 30s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64 install_vendor [ 31s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod/Coverage.pm [ 31s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/share/man/man3/Test::Pod::Coverage.3pm [ 31s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/5.20.0/aarch64-linux-thread-multi/perllocal.pod [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/aarch64-linux-thread-multi [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/5.20.0/aarch64-linux-thread-multi [ 32s] + FILES=perl-Test-Pod-Coverage.files [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0 -maxdepth 1 -type f [ 32s] + RES= [ 32s] + '[' -n '' ']' [ 32s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ -type d [ 32s] ++ sort [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ ']' [ 32s] + continue [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/Test = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/Test [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ '{print $2}' [ 32s] + el=Test [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0/ '{print $2}' [ 32s] + el=Test/Pod [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' Test = auto ']' [ 32s] + '[' /usr/lib64/perl5/vendor_perl/5.20.0/Test = /usr/lib64/perl5/vendor_perl/5.20.0/aarch64-linux-thread-multi/auto ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test ']' [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test -maxdepth 1 -type f [ 32s] + RES= [ 32s] + '[' -n '' ']' [ 32s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.20.0/Test [ 32s] + /bin/cat [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' Test/Pod = auto ']' [ 32s] + '[' /usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod = /usr/lib64/perl5/vendor_perl/5.20.0/aarch64-linux-thread-multi/auto ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test/Pod ']' [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test/Pod -maxdepth 1 -type f [ 32s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test/Pod/Coverage.pm [ 32s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test/Pod/Coverage.pm ']' [ 32s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod [ 32s] + /bin/cat [ 32s] + for file in '$RES' [ 32s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/lib64/perl5/vendor_perl/5.20.0//Test/Pod/Coverage.pm [ 32s] + fgen_file /usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod/Coverage.pm [ 32s] + /bin/cat [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/share/man ']' [ 32s] + fgen_file '/usr/share/man/man?/*' [ 32s] + /bin/cat [ 32s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/var/adm/perl-modules/perl-Test-Pod-Coverage ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64/usr/bin ']' [ 32s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08 [ 32s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08/perl-Test-Pod-Coverage-debuginfo.manifest [ 32s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08/perl-Test-Pod-Coverage-debugsource.manifest [ 32s] + /usr/lib/rpm/check-buildroot [ 32s] + /usr/lib/rpm//brp-compress [ 32s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 32s] + /usr/lib/rpm/brp-python-hardlink [ 32s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64 [ 32s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.IJtFOR [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd Test-Pod-Coverage-1.08 [ 32s] + make test [ 32s] PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 33s] # Testing Test::Pod::Coverage 1.08 [ 33s] t/00.load.t .............. ok [ 34s] t/all_modules.t .......... ok [ 34s] t/all_pod_coverage_ok.t .. ok [ 35s] t/alt_class.t ............ ok [ 35s] t/nopod.t ................ ok [ 36s] t/nosymbols.t ............ ok [ 36s] t/parms.t ................ ok [ 37s] t/pod.t .................. ok [ 37s] t/privates.t ............. ok [ 38s] t/self.t ................. ok [ 38s] t/simple.t ............... ok [ 38s] All tests successful. [ 38s] Files=11, Tests=23, 5 wallclock secs ( 0.28 usr 0.04 sys + 5.12 cusr 0.16 csys = 5.60 CPU) [ 38s] Result: PASS [ 38s] + exit 0 [ 38s] Processing files: perl-Test-Pod-Coverage-1.08-3.3.noarch [ 38s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 38s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 38s] [ 38s] Provides: perl(Test::Pod::Coverage) = 1.08 perl-Test-Pod-Coverage = 1.08-3.3 [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Processing files: perl-Test-Pod-Coverage-debugsource-1.08-3.3.noarch [ 38s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 38s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 38s] [ 38s] Provides: perl-Test-Pod-Coverage-debugsource = 1.08-3.3 [ 38s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 38s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64 [ 38s] warning: Could not canonicalize hostname: obsnw06 [ 38s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-3.3.src.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-3.3.noarch.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-debugsource-1.08-3.3.noarch.rpm [ 38s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MoESlw [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd Test-Pod-Coverage-1.08 [ 38s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-3.3.aarch64 [ 38s] + exit 0 [ 38s] ... checking for files with abuild user/group [ 38s] ... creating baselibs [ 39s] ... comparing built packages with the former built [ 39s] /usr/lib/build/pkg-diff.sh [ 39s] compare /.build.oldpackages/perl-Test-Pod-Coverage-1.08-3.2.src.rpm /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-3.3.src.rpm [ 39s] This is not a prerelease project. Compare the project name. [ 39s] comparing rpmtags [ 39s] comparing RELEASE [ 39s] comparing PROVIDES [ 39s] comparing scripts [ 39s] comparing filelist [ 39s] comparing file checksum [ 39s] RPM meta information is identical [ 39s] compare /.build.oldpackages/perl-Test-Pod-Coverage-1.08-3.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-3.3.noarch.rpm [ 40s] Comparing perl-Test-Pod-Coverage-1.08-3.2.noarch.rpm to perl-Test-Pod-Coverage-1.08-3.3.noarch.rpm [ 40s] This is not a prerelease project. Compare the project name. [ 40s] comparing rpmtags [ 40s] comparing RELEASE [ 40s] comparing PROVIDES [ 40s] comparing scripts [ 40s] comparing filelist [ 40s] --- /tmp/tmp.OKjY113534/tmp.pcRO113587 2018-04-17 03:26:35.210964971 +0000 [ 40s] +++ /tmp/tmp.OKjY113534/tmp.FKaI113589 2018-04-17 03:26:35.222964976 +0000 [ 40s] @@ -1,5 +1,5 @@ [ 40s] -/usr/lib64/perl5/vendor_perl/5.26.0/Test 0 (none) 40755 root root 0 4294967295 [ 40s] -/usr/lib64/perl5/vendor_perl/5.26.0/Test/Pod 0 (none) 40755 root root 0 4294967295 [ 40s] -/usr/lib64/perl5/vendor_perl/5.26.0/Test/Pod/Coverage.pm 0 (none) 100444 root root 0 4294967295 [ 40s] +/usr/lib64/perl5/vendor_perl/5.20.0/Test 0 (none) 40755 root root 0 4294967295 [ 40s] +/usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod 0 (none) 40755 root root 0 4294967295 [ 40s] +/usr/lib64/perl5/vendor_perl/5.20.0/Test/Pod/Coverage.pm 0 (none) 100444 root root 0 4294967295 [ 40s] /usr/share/man/man3/Test::Pod::Coverage.3pm.gz 2 (none) 100444 root root 0 4294967295 [ 40s] [ 40s] RPM meta information is different [ 40s] compare /.build.oldpackages/perl-Test-Pod-Coverage-debugsource-1.08-3.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-debugsource-1.08-3.3.noarch.rpm [ 40s] Comparing perl-Test-Pod-Coverage-debugsource-1.08-3.2.noarch.rpm to perl-Test-Pod-Coverage-debugsource-1.08-3.3.noarch.rpm [ 40s] This is not a prerelease project. Compare the project name. [ 40s] comparing rpmtags [ 40s] comparing RELEASE [ 40s] comparing PROVIDES [ 40s] comparing scripts [ 40s] comparing filelist [ 40s] comparing file checksum [ 40s] creating rename script [ 40s] RPM meta information is identical [ 40s] [ 40s] obsnw06 finished "build perl-Test-Pod-Coverage.spec" at Tue Apr 17 03:26:35 UTC 2018. [ 40s] Retried build at Fri Apr 20 21:26:50 2018 returned same result, skipped Retried build at Fri Apr 27 20:44:29 2018 returned same result, skipped Retried build at Fri May 4 10:29:03 2018 returned same result, skipped Retried build at Sat May 12 06:22:56 2018 returned same result, skipped Retried build at Sat May 12 20:26:04 2018 returned same result, skipped Retried build at Fri Jun 15 22:00:28 2018 returned same result, skipped Retried build at Mon Jun 25 08:53:18 2018 returned same result, skipped Retried build at Fri Jul 6 18:39:38 2018 returned same result, skipped Retried build at Sat Jul 14 03:27:12 2018 returned same result, skipped Retried build at Fri Jul 20 13:57:36 2018 returned same result, skipped Retried build at Sat Aug 18 10:47:57 2018 returned same result, skipped Retried build at Fri Sep 7 15:30:09 2018 returned same result, skipped Retried build at Sat Sep 8 08:02:36 2018 returned same result, skipped Retried build at Mon Sep 10 11:35:30 2018 returned same result, skipped Retried build at Fri Sep 14 07:47:56 2018 returned same result, skipped Retried build at Sat Sep 15 01:06:05 2018 returned same result, skipped Retried build at Sat Sep 15 03:05:51 2018 returned same result, skipped Retried build at Mon Sep 24 17:06:01 2018 returned same result, skipped