[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw03 started "build _service:gbs:perl-HTML-Parser.spec" at Fri Mar 8 11:36:30 UTC 2019. [ 0s] [ 0s] Building perl-HTML-Parser for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 '97b9d82be8ddadf4fd674c123988e73b' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-HTML-Parser.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-HTML-Parser.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-HTML-Parser.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libelf... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/94] installing libmagic-data-5.35-13.34 [ 8s] [2/94] installing perl-HTML-Tagset-3.20-3.4 [ 9s] [3/94] installing setup-0.9-9.6 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [4/94] installing filesystem-3.1-8.1 [ 9s] [5/94] installing glibc-2.24-13.31 [ 9s] [6/94] installing libatomic-6.2.1-32.1 [ 9s] [7/94] installing libgcc-6.2.1-32.1 [ 10s] [8/94] installing bash-3.2.57-6.3 [ 10s] [9/94] installing binutils-2.27-13.24 [ 10s] [10/94] installing cpio-2.11-3.3 [ 10s] [11/94] installing diffutils-3.3-3.3 [ 10s] [12/94] installing findutils-4.3.8-5.383 [ 10s] [13/94] installing hostname-3.20-5.3 [ 10s] [14/94] installing libattr-2.4.47-5.245 [ 11s] [15/94] installing libbz2-1.0.6-4.433 [ 11s] [16/94] installing libcap-2.24-4.450 [ 11s] [17/94] installing libelf-0.153-3.159 [ 12s] [18/94] installing libext2fs-1.43.4-6.1 [ 12s] [19/94] installing libfreebl3-3.34.1-5.207 [ 12s] [20/94] installing libgomp-6.2.1-32.1 [ 13s] [21/94] installing libitm-6.2.1-32.1 [ 13s] [22/94] installing libltdl-2.4.2-4.378 [ 13s] [23/94] installing liblua-5.1.5-5.14 [ 14s] [24/94] installing liblzma-5.2.4-6.42 [ 14s] [25/94] installing libpcre-8.41-6.3 [ 14s] [26/94] installing libpopt-1.16-4.72 [ 15s] [27/94] installing libsmack-1.3.1-5.207 [ 15s] [28/94] installing libsmartcols-2.30-13.3 [ 15s] [29/94] installing libsqlite-3.26.0-13.11 [ 16s] [30/94] installing libstdc++-6.2.1-32.1 [ 16s] [31/94] installing libuuid-2.30-13.3 [ 16s] [32/94] installing m4-1.4.17-3.3 [ 16s] [33/94] installing net-tools-2.0_20121208git-3.1 [ 16s] [34/94] installing nspr-4.12-4.52 [ 17s] [35/94] installing patch-2.7-3.72 [ 17s] [36/94] installing pkg-config-0.28-5.398 [ 17s] [37/94] installing sed-4.1c-4.3 [ 17s] [38/94] installing update-alternatives-1.18.15-4.3 [ 17s] [39/94] installing which-2.20-6.3 [ 17s] [40/94] installing zlib-1.2.11-5.144 [ 17s] [41/94] installing build-compare-2015.04.28-3.193 [ 17s] [42/94] installing libstdc++-devel-6.2.1-32.1 [ 17s] [43/94] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 19s] [44/94] installing terminfo-base-full-6.1-11.12 [ 19s] [45/94] installing cpp-6.2.1-32.1 [ 20s] [46/94] installing gcc-c++-6.2.1-32.1 [ 20s] [47/94] installing coreutils-6.9-3.8 [ 21s] [48/94] installing db4-4.8.30.NC-3.445 [ 21s] [49/94] installing gawk-3.1.5-5.4 [ 21s] [50/94] installing grep-2.5.2-6.3 [ 21s] [51/94] installing libacl-2.2.52-5.263 [ 21s] [52/94] installing libasm-0.153-3.159 [ 21s] [53/94] installing libblkid-2.30-13.3 [ 22s] [54/94] installing libcc1-6.2.1-32.1 [ 22s] [55/94] installing libgfortran-6.2.1-32.1 [ 22s] [56/94] installing libubsan-6.2.1-32.1 [ 23s] [57/94] installing make-4.0-4.70 [ 23s] [58/94] installing nss-certs-3.34.1-5.207 [ 23s] [59/94] installing smack-1.3.1-5.207 [ 23s] [60/94] installing bzip2-1.0.6-4.433 [ 23s] [61/94] installing libmagic-5.35-13.34 [ 23s] [62/94] installing libxml2-2.9.7-7.11 [ 24s] [63/94] installing xz-5.2.4-6.42 [ 24s] [64/94] installing libdw-0.153-3.159 [ 24s] [65/94] installing linux-glibc-devel-3.10-4.90 [ 25s] [66/94] installing file-5.35-13.34 [ 25s] [67/94] installing glibc-locale-2.24-13.31 [ 25s] [68/94] installing libmount-2.30-13.3 [ 26s] [69/94] installing tar-1.17-4.3 [ 26s] [70/94] installing gzip-1.3.12-7.220 [ 26s] [71/94] installing libfdisk-2.30-13.3 [ 26s] [72/94] installing libncurses6-6.1-11.12 [ 26s] [73/94] installing pam-1.1.6-8.1 [ 27s] [74/94] installing perl-5.26.0-8.3 [ 29s] [75/94] installing tzdata-2018i-10.1 [ 29s] [76/94] installing elfutils-0.153-3.159 [ 29s] [77/94] installing gcc-6.2.1-32.1 [ 30s] [78/94] installing build-mkbaselibs-20120927-3.1 [ 30s] [79/94] installing libncurses-6.1-11.12 [ 30s] [80/94] installing glibc-devel-2.24-13.31 [ 30s] [81/94] installing qemu-accel-x86_64-armv7l-0.4-13.21 [ 37s] [82/94] installing autoconf-2.69-5.121 [ 37s] [83/94] installing less-466-8.8 [ 37s] [84/94] installing libreadline-5.2-5.9 [ 38s] [85/94] installing procps-ng-3.3.15-8.3 [ 38s] [86/94] installing automake-1.15.1-6.191 [ 38s] [87/94] installing build-20120927-3.1 [ 38s] [88/94] installing util-linux-2.30-13.3 [ 39s] [89/94] installing libtool-2.4.2-4.378 [ 39s] [90/94] installing util-linux-su-2.30-13.3 [ 39s] [91/94] installing nss-3.34.1-5.207 [ 39s] [92/94] installing libsoftokn3-3.34.1-5.207 [ 39s] [93/94] installing rpm-4.11.0.1-11.23 [ 40s] [94/94] installing rpm-build-4.11.0.1-11.23 [ 40s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 40s] now finalizing build dir... [ 40s] Running build time source services... [ 41s] build target is armv7l-tizen-linux [ 41s] ----------------------------------------------------------------- [ 41s] I have the following modifications for perl-HTML-Parser.spec: [ 41s] 4c4 [ 41s] < Release: 0 [ 41s] --- [ 41s] > Release: 3.6 [ 41s] 34a35 [ 41s] > %changelog [ 41s] ----------------------------------------------------------------- [ 41s] ----- building perl-HTML-Parser.spec (user abuild) [ 41s] ----------------------------------------------------------------- [ 41s] ----------------------------------------------------------------- [ 41s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/97b9d82be8ddadf4fd674c123988e73b-perl-HTML-Parser' -ba /home/abuild/rpmbuild/SOURCES/perl-HTML-Parser.spec [ 43s] Building target platforms: armv7l-tizen-linux [ 43s] Building for target armv7l-tizen-linux [ 43s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.HZP16K [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + rm -rf HTML-Parser-3.69 [ 43s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/HTML-Parser-3.69.tar.gz [ 43s] + /bin/tar -xf - [ 43s] + STATUS=0 [ 43s] + '[' 0 -ne 0 ']' [ 43s] + cd HTML-Parser-3.69 [ 43s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 43s] + cp /home/abuild/rpmbuild/SOURCES/perl-HTML-Parser.manifest . [ 43s] + exit 0 [ 43s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MI9HJJ [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd HTML-Parser-3.69 [ 43s] ++ uname -m [ 43s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LDFLAGS= [ 43s] + export LDFLAGS [ 43s] + perl Makefile.PL INSTALLDIRS=vendor [ 45s] Checking if your kit is complete... [ 45s] Looks good [ 45s] Generating a Unix-style Makefile [ 45s] Writing Makefile for HTML::Parser [ 45s] Writing MYMETA.yml and MYMETA.json [ 45s] + make -j8 [ 45s] Running Mkbootstrap for Parser () [ 45s] "/usr/bin/perl" "/usr/lib/perl5/5.26.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.26.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/HTML-Parser-3.69/typemap' Parser.xs > Parser.xsc [ 45s] "/usr/bin/perl" mkhctype >hctype.h [ 45s] "/usr/bin/perl" mkpfunc >pfunc.h [ 46s] chmod 644 "Parser.bs" [ 46s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Parser.bs blib/arch/auto/HTML/Parser/Parser.bs 644 [ 46s] cp lib/HTML/TokeParser.pm blib/lib/HTML/TokeParser.pm [ 46s] cp lib/HTML/Entities.pm blib/lib/HTML/Entities.pm [ 46s] cp lib/HTML/HeadParser.pm blib/lib/HTML/HeadParser.pm [ 46s] cp Parser.pm blib/lib/HTML/Parser.pm [ 46s] cp lib/HTML/Filter.pm blib/lib/HTML/Filter.pm [ 46s] cp lib/HTML/LinkExtor.pm blib/lib/HTML/LinkExtor.pm [ 46s] cp lib/HTML/PullParser.pm blib/lib/HTML/PullParser.pm [ 46s] mv Parser.xsc Parser.c [ 46s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"3.69\" -DXS_VERSION=\"3.69\" -fPIC "-I/usr/lib/perl5/5.26.0/armv7l-linux-thread-multi/CORE" -DMARKED_SECTION Parser.c [ 46s] In file included from Parser.xs:118:0: [ 46s] hparser.c: In function 'parse_start': [ 46s] hparser.c:1270:14: warning: variable 'tag_name_first' set but not used [-Wunused-but-set-variable] [ 46s] hctype_t tag_name_first, tag_name_char; [ 46s] ^~~~~~~~~~~~~~ [ 47s] Parser.xs: In function 'XS_HTML__Parser_strict_comment': [ 47s] Parser.xs:483:41: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32 {aka long int}' [-Wformat=] [ 47s] croak("Unknown boolean attribute (%d)", ix); [ 47s] ^ [ 47s] Parser.xs: In function 'XS_HTML__Parser_ignore_tags': [ 47s] Parser.xs:520:42: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32 {aka long int}' [-Wformat=] [ 47s] croak("Unknown tag-list attribute (%d)", ix); [ 47s] ^ [ 48s] rm -f blib/arch/auto/HTML/Parser/Parser.so [ 48s] cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -fstack-protector-strong Parser.o -o blib/arch/auto/HTML/Parser/Parser.so \ [ 48s] \ [ 48s] [ 48s] chmod 755 blib/arch/auto/HTML/Parser/Parser.so [ 50s] Manifying 7 pod documents [ 50s] + exit 0 [ 50s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.r7FC4Y [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd HTML-Parser-3.69 [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm [ 50s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm [ 50s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm install_vendor [ 50s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Parser.bs blib/arch/auto/HTML/Parser/Parser.bs 644 [ 51s] Manifying 7 pod documents [ 51s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/PullParser.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/HeadParser.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Parser.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/TokeParser.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Filter.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Entities.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::Entities.3pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::Filter.3pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::TokeParser.3pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::HeadParser.3pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::LinkExtor.3pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::Parser.3pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man/man3/HTML::PullParser.3pm [ 52s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/5.26.0/armv7l-linux-thread-multi/perllocal.pod [ 52s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto [ 52s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 52s] + xargs -0 -r rm [ 52s] + '[' armv7l == noarch ']' [ 52s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/5.26.0/armv7l-linux-thread-multi/perllocal.pod [ 52s] + FILES=perl-HTML-Parser.files [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0 -maxdepth 1 -type f [ 52s] + RES= [ 52s] + '[' -n '' ']' [ 52s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ -type d [ 52s] ++ sort [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] + continue [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=armv7l-linux-thread-multi [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=armv7l-linux-thread-multi/HTML [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=armv7l-linux-thread-multi/auto [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=armv7l-linux-thread-multi/auto/HTML [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser = /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=armv7l-linux-thread-multi/auto/HTML/Parser [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' armv7l-linux-thread-multi = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi ']' [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 52s] + RES= [ 52s] + '[' -n '' ']' [ 52s] + fgen_dir /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi [ 52s] + /bin/cat [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' armv7l-linux-thread-multi/HTML = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML ']' [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML -maxdepth 1 -type f [ 52s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/PullParser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/HeadParser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Parser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/TokeParser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Filter.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Entities.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/LinkExtor.pm' [ 52s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/PullParser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/HeadParser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Parser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/TokeParser.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Filter.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Entities.pm [ 52s] /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/LinkExtor.pm' ']' [ 52s] + fgen_dir /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/PullParser.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/PullParser.pm [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/HeadParser.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/HeadParser.pm [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Parser.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Parser.pm [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/TokeParser.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/TokeParser.pm [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Filter.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Filter.pm [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/Entities.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Entities.pm [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/LinkExtor.pm [ 52s] + /bin/cat [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + continue [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' armv7l-linux-thread-multi/auto/HTML = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML ']' [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML -maxdepth 1 -type f [ 52s] + RES= [ 52s] + '[' -n '' ']' [ 52s] + fgen_dir /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML [ 52s] + /bin/cat [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' armv7l-linux-thread-multi/auto/HTML/Parser = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML/Parser ']' [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML/Parser -maxdepth 1 -type f [ 52s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 52s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so ']' [ 52s] + fgen_dir /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0//armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 52s] + /bin/cat [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/share/man ']' [ 52s] + fgen_file '/usr/share/man/man?/*' [ 52s] + /bin/cat [ 52s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/var/adm/perl-modules/perl-HTML-Parser ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/bin ']' [ 52s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/HTML-Parser-3.69 [ 52s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so [ 53s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 53s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 53s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 53s] 191 blocks [ 53s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/HTML-Parser-3.69/perl-HTML-Parser-debuginfo.manifest [ 53s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/HTML-Parser-3.69/perl-HTML-Parser-debugsource.manifest [ 53s] + /usr/lib/rpm/check-buildroot [ 53s] + /usr/lib/rpm//brp-compress [ 53s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 53s] + /usr/lib/rpm/brp-python-hardlink [ 53s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm [ 53s] Processing files: perl-HTML-Parser-3.69-3.6.armv7l [ 54s] Provides: Parser.so perl(HTML::Entities) = 3.69 perl(HTML::Filter) = 3.57 perl(HTML::HeadParser) = 3.69 perl(HTML::LinkExtor) = 3.69 perl(HTML::Parser) = 3.69 perl(HTML::PullParser) = 3.57 perl(HTML::TokeParser) = 3.69 perl-HTML-Parser = 3.69-3.6 perl-HTML-Parser(armv7l-32) = 3.69-3.6 [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 54s] Processing files: perl-HTML-Parser-debugsource-3.69-3.6.armv7l [ 54s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 54s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 54s] [ 54s] Provides: perl-HTML-Parser-debugsource = 3.69-3.6 perl-HTML-Parser-debugsource(armv7l-32) = 3.69-3.6 [ 54s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 54s] Processing files: perl-HTML-Parser-docs-3.69-3.6.armv7l [ 54s] Provides: perl-HTML-Parser-docs = 3.69-3.6 perl-HTML-Parser-docs(armv7l-32) = 3.69-3.6 [ 54s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 54s] Processing files: perl-HTML-Parser-debuginfo-3.69-3.6.armv7l [ 54s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 54s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 54s] [ 54s] Provides: perl-HTML-Parser-debuginfo = 3.69-3.6 perl-HTML-Parser-debuginfo(armv7l-32) = 3.69-3.6 [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm [ 54s] warning: Could not canonicalize hostname: obspw03 [ 54s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-HTML-Parser-3.69-3.6.src.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-3.69-3.6.armv7l.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debugsource-3.69-3.6.armv7l.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-docs-3.69-3.6.armv7l.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debuginfo-3.69-3.6.armv7l.rpm [ 54s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yLOT4s [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd HTML-Parser-3.69 [ 54s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.69-3.6.arm [ 54s] + exit 0 [ 54s] ... checking for files with abuild user/group [ 54s] ... creating baselibs [ 55s] ... comparing built packages with the former built [ 55s] /usr/lib/build/pkg-diff.sh [ 55s] compare /.build.oldpackages/perl-HTML-Parser-3.69-3.5.src.rpm /home/abuild/rpmbuild/SRPMS/perl-HTML-Parser-3.69-3.6.src.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] RPM meta information is identical [ 55s] compare /.build.oldpackages/perl-HTML-Parser-3.69-3.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-3.69-3.6.armv7l.rpm [ 55s] Comparing perl-HTML-Parser-3.69-3.5.armv7l.rpm to perl-HTML-Parser-3.69-3.6.armv7l.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 56s] comparing PROVIDES [ 56s] comparing scripts [ 56s] comparing filelist [ 56s] --- /tmp/tmp.nbGc127262/tmp.Gmra127280 2019-03-08 11:37:26.039200844 +0000 [ 56s] +++ /tmp/tmp.nbGc127262/tmp.TQLO127282 2019-03-08 11:37:26.051200744 +0000 [ 56s] @@ -1,15 +1,15 @@ [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/Entities.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/Filter.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/HeadParser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/LinkExtor.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/Parser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/PullParser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/HTML/TokeParser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto/HTML 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto/HTML/Parser 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib/perl5/vendor_perl/5.20.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so 0 (none) 100555 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Entities.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Filter.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/HeadParser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/LinkExtor.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/Parser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/PullParser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/HTML/TokeParser.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto/HTML/Parser/Parser.so 0 (none) 100555 root root 0 4294967295 [ 56s] /usr/share/man/man3/HTML::Entities.3pm.gz 2 (none) 100444 root root 0 4294967295 [ 56s] /usr/share/man/man3/HTML::Filter.3pm.gz 2 (none) 100444 root root 0 4294967295 [ 56s] /usr/share/man/man3/HTML::HeadParser.3pm.gz 2 (none) 100444 root root 0 4294967295 [ 56s] RPM meta information is different [ 56s] compare /.build.oldpackages/perl-HTML-Parser-debuginfo-3.69-3.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debuginfo-3.69-3.6.armv7l.rpm [ 56s] skipping -debuginfo package [ 56s] compare /.build.oldpackages/perl-HTML-Parser-debugsource-3.69-3.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debugsource-3.69-3.6.armv7l.rpm [ 56s] Comparing perl-HTML-Parser-debugsource-3.69-3.5.armv7l.rpm to perl-HTML-Parser-debugsource-3.69-3.6.armv7l.rpm [ 56s] This is not a prerelease project. Compare the project name. [ 56s] comparing rpmtags [ 56s] comparing RELEASE [ 56s] comparing PROVIDES [ 56s] comparing scripts [ 56s] comparing filelist [ 56s] comparing file checksum [ 56s] creating rename script [ 56s] RPM file checksum differs. [ 56s] Extracting packages [ 56s] /usr/src/debug/HTML-Parser-3.69/Parser.c differs (C source, ASCII text) [ 56s] --- old//usr/src/debug/HTML-Parser-3.69/Parser.c 2018-11-09 16:43:38.000000000 +0000 [ 56s] +++ new//usr/src/debug/HTML-Parser-3.69/Parser.c 2019-03-08 11:37:16.000000000 +0000 [ 56s] @@ -1,5 +1,5 @@ [ 56s] /* [ 56s] - * This file was generated automatically by ExtUtils::ParseXS version 3.24 from the [ 56s] + * This file was generated automatically by ExtUtils::ParseXS version 3.34 from the [ 56s] * contents of Parser.xs. Do not edit this file, edit Parser.xs instead. [ 56s] * [ 56s] * ANY CHANGES MADE HERE WILL BE LOST! [ 56s] @@ -439,10 +439,10 @@ [ 56s] [ 56s] /* prototype to pass -Wmissing-prototypes */ [ 56s] STATIC void [ 56s] -S_croak_xs_usage(pTHX_ const CV *const cv, const char *const params); [ 56s] +S_croak_xs_usage(const CV *const cv, const char *const params); [ 56s] [ 56s] STATIC void [ 56s] -S_croak_xs_usage(pTHX_ const CV *const cv, const char *const params) [ 56s] +S_croak_xs_usage(const CV *const cv, const char *const params) [ 56s] { [ 56s] const GV *const gv = CvGV(cv); [ 56s] [ 56s] @@ -454,21 +454,17 @@ [ 56s] const char *const hvname = stash ? HvNAME(stash) : NULL; [ 56s] [ 56s] if (hvname) [ 56s] - Perl_croak(aTHX_ "Usage: %s::%s(%s)", hvname, gvname, params); [ 56s] + Perl_croak_nocontext("Usage: %s::%s(%s)", hvname, gvname, params); [ 56s] else [ 56s] - Perl_croak(aTHX_ "Usage: %s(%s)", gvname, params); [ 56s] + Perl_croak_nocontext("Usage: %s(%s)", gvname, params); [ 56s] } else { [ 56s] /* Pants. I don't think that it should be possible to get here. */ [ 56s] - Perl_croak(aTHX_ "Usage: CODE(0x%"UVxf")(%s)", PTR2UV(cv), params); [ 56s] + Perl_croak_nocontext("Usage: CODE(0x%" UVxf ")(%s)", PTR2UV(cv), params); [ 56s] } [ 56s] } [ 56s] #undef PERL_ARGS_ASSERT_CROAK_XS_USAGE [ 56s] [ 56s] -#ifdef PERL_IMPLICIT_CONTEXT [ 56s] -#define croak_xs_usage(a,b) S_croak_xs_usage(aTHX_ a,b) [ 56s] -#else [ 56s] #define croak_xs_usage S_croak_xs_usage [ 56s] -#endif [ 56s] [ 56s] #endif [ 56s] [ 56s] @@ -481,7 +477,13 @@ [ 56s] #define newXSproto_portable(name, c_impl, file, proto) (PL_Sv=(SV*)newXS(name, c_impl, file), sv_setpv(PL_Sv, proto), (CV*)PL_Sv) [ 56s] #endif /* !defined(newXS_flags) */ [ 56s] [ 56s] -#line 485 "Parser.c" [ 56s] +#if PERL_VERSION_LE(5, 21, 5) [ 56s] +# define newXS_deffile(a,b) Perl_newXS(aTHX_ a,b,file) [ 56s] +#else [ 56s] +# define newXS_deffile(a,b) Perl_newXS_deffile(aTHX_ a,b) [ 56s] +#endif [ 56s] + [ 56s] +#line 487 "Parser.c" [ 56s] [ 56s] XS_EUPXS(XS_HTML__Parser__alloc_pstate); /* prototype to pass -Wmissing-prototypes */ [ 56s] XS_EUPXS(XS_HTML__Parser__alloc_pstate) [ 56s] @@ -498,7 +500,7 @@ [ 56s] HV* hv; [ 56s] MAGIC* mg; [ 56s] [ 56s] -#line 502 "Parser.c" [ 56s] +#line 504 "Parser.c" [ 56s] #line 347 "Parser.xs" [ 56s] sv = SvRV(self); [ 56s] if (!sv || SvTYPE(sv) != SVt_PVHV) [ 56s] @@ -525,7 +527,7 @@ [ 56s] SvREADONLY_on(sv); [ 56s] [ 56s] hv_store(hv, "_hparser_xs_state", 17, newRV_noinc(sv), 0); [ 56s] -#line 529 "Parser.c" [ 56s] +#line 531 "Parser.c" [ 56s] } [ 56s] XSRETURN_EMPTY; [ 56s] } [ 56s] @@ -546,7 +548,7 @@ [ 56s] ; [ 56s] #line 378 "Parser.xs" [ 56s] PSTATE* p_state = get_pstate_hv(aTHX_ self); [ 56s] -#line 550 "Parser.c" [ 56s] +#line 552 "Parser.c" [ 56s] #line 380 "Parser.xs" [ 56s] if (p_state->parsing) [ 56s] croak("Parse loop not allowed"); [ 56s] @@ -591,7 +593,7 @@ [ 56s] else { [ 56s] PUSHs(self); [ 56s] } [ 56s] -#line 595 "Parser.c" [ 56s] +#line 597 "Parser.c" [ 56s] PUTBACK; [ 56s] return; [ 56s] } [ 56s] @@ -611,7 +613,7 @@ [ 56s] ; [ 56s] #line 428 "Parser.xs" [ 56s] PSTATE* p_state = get_pstate_hv(aTHX_ self); [ 56s] -#line 615 "Parser.c" [ 56s] +#line 617 "Parser.c" [ 56s] #line 430 "Parser.xs" [ 56s] if (p_state->parsing) [ 56s] p_state->eof = 1; [ 56s] @@ -621,7 +623,7 @@ [ 56s] p_state->parsing = 0; [ 56s] } [ 56s] PUSHs(self); [ 56s] -#line 625 "Parser.c" [ 56s] +#line 627 "Parser.c" [ 56s] PUTBACK; [ 56s] return; [ 56s] } [ 56s] @@ -640,7 +642,7 @@ [ 56s] ; [ 56s] #line 457 "Parser.xs" [ 56s] bool *attr; [ 56s] -#line 644 "Parser.c" [ 56s] +#line 646 "Parser.c" [ 56s] SV * RETVAL; [ 56s] #line 459 "Parser.xs" [ 56s] switch (ix) { [ 56s] @@ -672,9 +674,9 @@ [ 56s] RETVAL = boolSV(*attr); [ 56s] if (items > 1) [ 56s] *attr = SvTRUE(ST(1)); [ 56s] -#line 676 "Parser.c" [ 56s] +#line 678 "Parser.c" [ 56s] + RETVAL = sv_2mortal(RETVAL); [ 56s] ST(0) = RETVAL; [ 56s] - sv_2mortal(ST(0)); [ 56s] } [ 56s] XSRETURN(1); [ 56s] } [ 56s] @@ -697,9 +699,9 @@ [ 56s] SvREFCNT_dec(pstate->bool_attr_val); [ 56s] pstate->bool_attr_val = newSVsv(ST(1)); [ 56s] } [ 56s] -#line 701 "Parser.c" [ 56s] +#line 703 "Parser.c" [ 56s] + RETVAL = sv_2mortal(RETVAL); [ 56s] ST(0) = RETVAL; [ 56s] - sv_2mortal(ST(0)); [ 56s] } [ 56s] XSRETURN(1); [ 56s] } [ 56s] @@ -718,7 +720,7 @@ [ 56s] #line 512 "Parser.xs" [ 56s] HV** attr; [ 56s] int i; [ 56s] -#line 722 "Parser.c" [ 56s] +#line 724 "Parser.c" [ 56s] #line 515 "Parser.xs" [ 56s] switch (ix) { [ 56s] case 1: attr = &pstate->report_tags; break; [ 56s] @@ -764,7 +766,7 @@ [ 56s] SvREFCNT_dec(*attr); [ 56s] *attr = 0; [ 56s] } [ 56s] -#line 768 "Parser.c" [ 56s] +#line 770 "Parser.c" [ 56s] } [ 56s] XSRETURN_EMPTY; [ 56s] } [ 56s] @@ -789,7 +791,7 @@ [ 56s] int event = -1; [ 56s] int i; [ 56s] struct p_handler *h; [ 56s] -#line 793 "Parser.c" [ 56s] +#line 795 "Parser.c" [ 56s] #line 571 "Parser.xs" [ 56s] /* map event name string to event_id */ [ 56s] for (i = 0; i < EVENT_COUNT; i++) { [ 56s] @@ -824,7 +826,7 @@ [ 56s] h->cb = 0; [ 56s] h->cb = check_handler(aTHX_ ST(2)); [ 56s] } [ 56s] -#line 828 "Parser.c" [ 56s] +#line 830 "Parser.c" [ 56s] PUTBACK; [ 56s] return; [ 56s] } [ 56s] @@ -842,7 +844,7 @@ [ 56s] #line 611 "Parser.xs" [ 56s] int i; [ 56s] HV *entity2char = perl_get_hv("HTML::Entities::entity2char", FALSE); [ 56s] -#line 846 "Parser.c" [ 56s] +#line 848 "Parser.c" [ 56s] #line 614 "Parser.xs" [ 56s] if (GIMME_V == G_SCALAR && items > 1) [ 56s] items = 1; [ 56s] @@ -854,7 +856,7 @@ [ 56s] decode_entities(aTHX_ ST(i), entity2char, 0); [ 56s] } [ 56s] SP += items; [ 56s] -#line 858 "Parser.c" [ 56s] +#line 860 "Parser.c" [ 56s] compare /.build.oldpackages/perl-HTML-Parser-docs-3.69-3.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-docs-3.69-3.6.armv7l.rpm [ 56s] Comparing perl-HTML-Parser-docs-3.69-3.5.armv7l.rpm to perl-HTML-Parser-docs-3.69-3.6.armv7l.rpm [ 56s] This is not a prerelease project. Compare the project name. [ 56s] comparing rpmtags [ 56s] comparing RELEASE [ 57s] comparing PROVIDES [ 57s] comparing scripts [ 57s] comparing filelist [ 57s] comparing file checksum [ 57s] creating rename script [ 57s] RPM file checksum differs. [ 57s] Extracting packages [ 57s] /usr/share/man/man3/HTML::Entities.3pm differs (:Entities.3pm: troff or preprocessor input, ASCII text) [ 57s] --- old//usr/share/man/man3/HTML::Entities.3pm 2019-03-08 11:37:27.255190632 +0000 [ 57s] +++ new//usr/share/man/man3/HTML::Entities.3pm 2019-03-08 11:37:27.263190565 +0000 [ 57s] @@ -46,7 +46,7 @@ [ 57s] .ie \n(.g .ds Aq \(aq [ 57s] .el .ds Aq ' [ 57s] .\" [ 57s] -.\" If the F register is turned on, we'll generate index entries on stderr for [ 57s] +.\" If the F register is >0, we'll generate index entries on stderr for [ 57s] .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index [ 57s] .\" entries marked with X<> in POD. Of course, you'll have to process the [ 57s] .\" output yourself in some meaningful fashion. [ 57s] @@ -54,82 +54,16 @@ [ 57s] .\" Avoid warning from groff about undefined register 'F'. [ 57s] .de IX [ 57s] .. [ 57s] -.nr rF 0 [ 57s] -.if \n(.g .if rF .nr rF 1 [ 57s] -.if (\n(rF:(\n(.g==0)) \{ [ 57s] -. if \nF \{ [ 57s] -. de IX [ 57s] -. tm Index:\\$1\t\\n%\t"\\$2" [ 57s] +.if !\nF .nr F 0 [ 57s] +.if \nF>0 \{\ [ 57s] +. de IX [ 57s] +. tm Index:\\$1\t\\n%\t"\\$2" [ 57s] .. [ 57s] -. if !\nF==2 \{ [ 57s] -. nr % 0 [ 57s] -. nr F 2 [ 57s] -. \} [ 57s] +. if !\nF==2 \{\ [ 57s] +. nr % 0 [ 57s] +. nr F 2 [ 57s] . \} [ 57s] .\} [ 57s] -.rr rF [ 57s] -.\" [ 57s] -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). [ 57s] -.\" Fear. Run. Save yourself. No user-serviceable parts. [ 57s] -. \" fudge factors for nroff and troff [ 57s] -.if n \{\ [ 57s] -. ds #H 0 [ 57s] -. ds #V .8m [ 57s] -. ds #F .3m [ 57s] -. ds #[ \f1 [ 57s] -. ds #] \fP [ 57s] -.\} [ 57s] -.if t \{\ [ 57s] -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) [ 57s] -. ds #V .6m [ 57s] -. ds #F 0 [ 57s] -. ds #[ \& [ 57s] -. ds #] \& [ 57s] -.\} [ 57s] -. \" simple accents for nroff and troff [ 57s] -.if n \{\ [ 57s] -. ds ' \& [ 57s] -. ds ` \& [ 57s] -. ds ^ \& [ 57s] -. ds , \& [ 57s] -. ds ~ ~ [ 57s] -. ds / [ 57s] -.\} [ 57s] -.if t \{\ [ 57s] -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" [ 57s] -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' [ 57s] -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' [ 57s] -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' [ 57s] -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' [ 57s] -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' [ 57s] -.\} [ 57s] -. \" troff and (daisy-wheel) nroff accents [ 57s] -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' [ 57s] -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' [ 57s] -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] [ 57s] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' [ 57s] -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' [ 57s] -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] [ 57s] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] [ 57s] -.ds ae a\h'-(\w'a'u*4/10)'e [ 57s] -.ds Ae A\h'-(\w'A'u*4/10)'E [ 57s] -. \" corrections for vroff [ 57s] -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' [ 57s] -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' [ 57s] -. \" for low resolution devices (crt and lpr) [ 57s] -.if \n(.H>23 .if \n(.V>19 \ [ 57s] -\{\ [ 57s] -. ds : e [ 57s] -. ds 8 ss [ 57s] -. ds o a [ 57s] -. ds d- d\h'-1'\(ga [ 57s] -. ds D- D\h'-1'\(hy [ 57s] -. ds th \o'bp' [ 57s] -. ds Th \o'LP' [ 57s] -. ds ae ae [ 57s] -. ds Ae AE [ 57s] -.\} [ 57s] -.rm #[ #] #H #V #F C [ 57s] .\" ======================================================================== [ 57s] .\" [ 57s] .IX Title "HTML::Entities 3" [ 57s] @@ -153,7 +87,7 @@ [ 57s] For example, this: [ 57s] .PP [ 57s] .Vb 2 [ 57s] -\& $input = "vis\-a\*`\-vis Beyonce\*'\*(Aqs nai\*:ve\enpapier\-ma\*^che\*' re\*'sume\*'"; [ 57s] +\& $input = "vis\-à\-vis Beyoncé\*(Aqs naïve\enpapier\-mâché résumé"; [ 57s] \& print encode_entities($input), "\en" [ 57s] .Ve [ 57s] .PP [ 57s] @@ -209,7 +143,7 @@ [ 57s] .Vb 3 [ 57s] \& $string = "foo bar"; [ 57s] \& _decode_entities($string, { nb => "@", nbsp => "\exA0" }, 1); [ 57s] -\& print $string; # will print "foo\ bar" [ 57s] +\& print $string; # will print "foo bar" [ 57s] .Ve [ 57s] .Sp [ 57s] This routine is exported by default. [ 57s] [ 57s] obspw03 finished "build perl-HTML-Parser.spec" at Fri Mar 8 11:37:27 UTC 2019. [ 57s] Retried build at Sat Mar 16 16:54:31 2019 returned same result, skipped Retried build at Mon Mar 25 00:31:41 2019 returned same result, skipped Retried build at Tue Apr 2 11:36:30 2019 returned same result, skipped Retried build at Mon Apr 8 02:54:03 2019 returned same result, skipped Retried build at Fri Apr 12 15:00:33 2019 returned same result, skipped Retried build at Thu Apr 18 03:23:03 2019 returned same result, skipped